Vishay CRCA12S103105182E Thick film array, resistor/capacitor Datasheet

CRCA
Vishay Dale
Thick Film Array, Resistor/Capacitor
FEATURES
• Single component reduces board space and
•
•
•
•
•
•
•
component counts
Choice of dielectric characteristics X7R or Y5U
Wrap around termination
Thick film R/C element
Inner electrode protection
Flow & Reflow solderable
Automatic placement capability, standard size
8 or 10 pin configurations
STANDARD ELECTRICAL SPECIFICATIONS
RESISTOR
GLOBAL POWER RATING
MODEL
P70 °C
W
CAPACITOR
TEMPERATURE TOLERANCE
COEFFICIENT
ppm/°C
%
VALUE
RANGE
Ω
TEMPERATURE TOLERANCE VOLTAGE
DIELECTRIC COEFFICIENT
RATING
%
%
VDC
VALUE
RANGE
pF
CRCA12E
CRCA12S
0.125
200
5
10R - 1M0
X7R
± 15
20
50
10 - 270
CRCA12E
CRCA12S
0.125
200
5
10R - 1M0
Y5U
+ 20, - 56
20
50
270 - 1800
RESISTOR
• Operating Temperature Range: X7R - 55 °C to + 125 °C
• Technology: Thick Film
CAPACITOR
• Operating Temperature Range: X7R - 55 °C to + 125 °C
Y5U - 30 °C to + 85 °C
• Maximum Dissipation Factor: 2.5 %
• Dielectric Withstanding Voltage: 125 Vdc , 5 sec, 50 mA Charge
Notes
• Ask about extended value ranges
• Packaging: according to EIA 481
• Power rating depends on the max. temperature at the solder point,
the component placement density and the substrate material
TECHNICAL SPECIFICATIONS
PARAMETER
UNIT
RESISTOR
X7R CAPACITOR
Y5U CAPACITOR
Rated Dissipation at 70 °C
(CECC 40401 I EIA 575)
W
0.125
-
-
Capacitor Voltage Rating
V
-
50
50
Dielectric Withstanding
Voltage (5 sec, 50 mA Charge)
Vdc
-
125
125
Category Temperature Range
°C
- 55/+ 155
- 55/+ 125
- 30/+ 85
Insulation Resistance
Ω
> 1010
GLOBAL PART NUMBER INFORMATION
New Global Part Numbering: CRCA12E081472220R (preferred part numbering format)
C
MODEL
R
C
A
1
PIN COUNT SCHEMATIC
CRCA12E
CRCA12S
08 = 8 Pin
10 = 10 Pin
1 = 01
2 = 02
3 = 03
0 = Special
2
E
0
8
1
4
7
2
2
2
0
R
RESISTANCE
CAPACITANCE
PACKAGING
SPECIAL
VALUE
VALUE
2 digit significant
2 digit significant
E = Lead (Pb)-free, T/R (2000 pcs) (Dash Number)
figures, followed by figures, followed by
(up to 1 digit)
R = Tin/Lead, T/R (2000 pcs)
a multiplier
multiplier
Blank = Standard
100 = 10 Ω
100 = 10 pF
683 = 68 kΩ
271 = 270 pF
105 = 1.0 MΩ
182 = 1800 pF
(Tolerance = ± 5 %) (Tolerance = ± 20 %)
Historical Part Number example: CRCA12E0801472J220MRB8 (will continue to be accepted)
CRCA12E
08
01
472
J
220
M
RB8
MODEL
PIN COUNT
SCHEMATIC
RESISTANCE
VALUE
TOLERANCE
CAPACITANCE
VALUE
TOLERANCE
PACKAGING
www.vishay.com
280
For technical questions, contact: [email protected]
Document Number: 31044
Revision: 15-Jan-07
CRCA
Thick Film Array, Resistor/Capacitor
Vishay Dale
DIMENSIONS
8-Terminal device
S-Version
a
GLOBAL
MODEL
PIN
NO#
CRCA12E
CRCA12S
CRCA12E
CRCA12S
8
8
10
10
E-Version
e
SIZE
INCH METRIC
2012
5032
2012
5032
2512
6432
2512
6432
L
5.1 ± 0.15
5.1 ± 0.15
6.4 ± 0.15
6.4 ± 0.15
c
2.2
2.2
WAVE SOLDERING
REFLOW SOLDERING
W
3.05 ± 0.15
3.05 ± 0.15
3.05 ± 0.15
3.05 ± 0.15
T
0.61 ± 0.10
0.61 ± 0.10
0.61 ± 0.10
0.61 ± 0.10
DIMENSIONS [in millimeters]
B
B*
A
A*
DNOM
0.51 ± 0.25 0.38 ± 0.2 0.79 ± 0.15
0.25
0.51 ± 0.25 0.38 ± 0.2 0.79 ± 0.15 0.89 ± 0.15 0.25
0.51 ± 0.25 0.38 ± 0.2 0.79 ± 0.15
0.25
0.51 ± 0.25 0.38 ± 0.2 0.79 ± 0.15 0.89 ± 0.15 0.25
SOLDER PAD DIMENSIONS [in millimeters]
w
d
p
4.3
0.57
1.27
3.9
0.57
1.27
a
0.71
0.71
b
1.05
0.86
PNOM
1.27
1.27
1.27
1.27
e
1.09
1.09
Note
1. The images shown are for an 8 pin Part. For a 10 pin part, use the same pitch and add another pair of “a” dimension pads to the inner solder
pads.
01 Circuit
CRCA12E & S
02 Circuit
CRCA12E & S
Rated Power in %
SCHEMATICS
03 Circuit
CRCA12E & S
120
100
80
60
40
20
10 Pin only
10 Pin only
8 Pin
10 Pin
0
- 55
- 25
0
25
50
Derating
75
100
125
150 175
70 Ambient Temperature in
°C
PERFORMANCE
TEST
CONDITIONS OF TEST
Endurance Test at 70 °C MIL-Std-202 Method 108
1000 hours at 70 °C, 1.5 hours "ON", 0.5 hours "OFF"
TEST RESULTS
R
C
± (5 % + 2 Ω)
± 20 %
Dielectric Withstanding Voltage MIL-Std-202
Method 301
125 Vdc, 5 seconds, 50 mA charge
Thermal Shock MIL-Std-202 Method 107
100 cycles, - 55 to + 125 °C
± (5 % + 2 Ω)
± 20 %
Moisture MIL-Std-202 Method 106
Omit steps 7A and B
± (5 % + 2 Ω)
± 20 %
no physical damage
Resistance to Soldering Heat EIA 575
10 seconds at 260 °C solder bath temperature
± (5 % + 2 Ω)
± 20 %
High Temperature Exposure EIA 575
125 °C for 100 hours
± (5 % + 2 Ω)
± 20 %
Low Temperature Operation EIA 575
1 hour at - 55 °C then 45 minutes at 50 V
± (5 % + 2 Ω)
± 20 %
Solderability & Leaching EIA 575 3.12
Condition C
95 % Coverage
APPLICABLE SPECIFICATIONS
• IPC Standards
• EIA 575
Document Number: 31044
Revision: 15-Jan-07
For technical questions, contact: [email protected]
www.vishay.com
281
Legal Disclaimer Notice
Vishay
Disclaimer
All product specifications and data are subject to change without notice.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf
(collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein
or in any other disclosure relating to any product.
Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any
information provided herein to the maximum extent permitted by law. The product specifications do not expand or
otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed
therein, which apply to these products.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this
document or by any conduct of Vishay.
The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless
otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such
applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting
from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding
products designed for such applications.
Product names and markings noted herein may be trademarks of their respective owners.
Document Number: 91000
Revision: 18-Jul-08
www.vishay.com
1
Similar pages