Vishay CRCW0402RKSEBIF Lead (pb)-free thick film, rectangular, pulse proof chip resistor Datasheet

D../CRCW....-IF e3
Vishay
Lead (Pb)-free Thick Film, Rectangular,
Pulse Proof Chip Resistors
FEATURES
•
•
•
•
•
High pulse performance
Metal glaze on high quality ceramic
Protective overglaze
Lead (Pb)-free solder contacts on Ni barrier layer
Pure tin plating provides compatibility with lead (Pb)-free
and lead containing soldering processes
• Compatible with “Restriction of the use of Hazardous
Substances” (RoHS) directive 2002/95/EC (issue 2004)
• Excellent stability (ΔR/R ≤ ± 1 % for 1000 h at 70 °C) in
different environmental conditions
STANDARD ELECTRICAL SPECIFICATIONS
SIZE
MODEL
INCH
METRIC
POWER RATING
P70 °C
W
LIMITING
ELEMENT
VOLTAGE
MAX. V
50
75
150
200
TEMPERATURE
COEFFICIENT
ppm/K
TOLERANCE RESISTANCE
RANGE
%
Ω
E-SERIES
D10/CRCW0402-IF 0402
1005
0.063
± 200
± 5, ± 10
1R0 - 100K
E24
D11/CRCW0603-IF 0603
1608
0.10
± 200
± 5, ± 10
1R0 - 100K
E24
D12/CRCW0805-IF 0805
2012
0.125
± 200
± 5, ± 10
1R0 - 100K
E24
D25/CRCW1206-IF 1206
3216
0.25
± 200
± 5, ± 10
1R0 - 100K
E24
Notes
• These resistors do not feature a limited lifetime when operated within the permissible limits. However, resistance value drift increasing over
operating time may result in exceeding a limit acceptable to the specific application, thereby establishing a functional lifetime.
• Marking and packaging: See appropriate catalog or web pages
• Power rating depends on the max. temperature at the solder point, the component placement density and the substrate material
TECHNICAL SPECIFICATIONS
PARAMETER
UNIT D10/CRCW0402-IF
D11/CRCW0603-IF D12/CRCW0805-IF D25/CRCW1206-IF
W
0.063
0.10
0.125
0.25
Rated Dissipation at P70 (1)
V
50
75
150
200
Limiting Element Voltage Umax. AC/DC
V
> 75
> 100
> 200
> 300
Insulation Voltage Uins (1 min)
Thermal Resistance
K/W
≤ 870
≤ 550
≤ 440
≤ 220
Insulation Resistance
Ω
> 109
Category Temperature Range
°C
- 55 to + 155
Weight
mg
0.65
2
5.5
10
Note
(1) The power dissipation on the resistor generates a temperature rise against the local ambient, depending on the heat flow support of the
printe-circuit board (thermal resistance). The rated dissipation applies only if the permitted film temperature of 155 °C is not exceeded.
PART NUMBER AND PRODUCT DESCRIPTION
PART NUMBER: CRCW08051R00JNEAIF (2)
C
R
C
W
0
8
0
5
1
R
0
0
J
N
E
A
I
F
MODEL/SIZE
VALUE
TOLERANCE
TCR
PACKAGING (3)
SPECIAL
CRCW0402
CRCW0603
CRCW0805
CRCW1206
R = Decimal
K = Thousand
J=±5%
K = ± 10 %
N = ± 200 ppm/K
S = Special
EA, EB, EC
ED, EE, EI,
EL
Up to 2 digits
IF = Pulse
5%
ET1
e3
LEAD (Pb)-FREE
e3 = Pure tin
Terminal finish
PRODUCT DESCRIPTION: D12/CRCW0805-IF 200 1R0 5 % ET1 e3
D12/CRCW0805-IF
200
1R0
MODEL
TCR
RESISTANCE VALUE
TOLERANCE
PACKAGING (3)
D10/CRCW0402-IF
D11/CRCW0603-IF
D12/CRCW0805-IF
D12/CRCW1206-IF
± 200 ppm/K
1R0 = 1 Ω
10K = 10.0 kΩ
±5%
± 10 %
ET1, ET5, ET6,
ET7, EF4, EG1,
E20
Notes
(2) Preferred way for ordering products is by use of the PART NUMBER
(3) Please refer to table PACKAGING, see next page
www.vishay.com
1
For technical questions, contact: [email protected]
Document Number: 20024
Revision: 13-Oct-08
D../CRCW....-IF e3
Lead (Pb)-free Thick Film, Rectangular,
Pulse Proof Chip Resistors
Vishay
PACKAGING
REEL
MODEL
DIAMETER
PITCH
PIECES/
REEL
180 mm/7"
330 mm/13"
180 mm/7"
285 mm/11.25"
330 mm/13"
180 mm/7"
285 mm/11.25"
330 mm/13"
180 mm/7"
285 mm/11.25"
330 mm/13"
330 mm/13"
2 mm
2 mm
4 mm
4 mm
4 mm
4 mm
4 mm
4 mm
4 mm
4 mm
4 mm
4 mm
10 000
50 000
5000
10 000
20 000
5000
10 000
20 000
5000
10 000
15 000
20 000
TAPE
WIDTH
D10/CRCW0402-IF
8 mm
D11/CRCW0603-IF
8 mm
D12/CRCW0805-IF
8 mm
D25/CRCW1206-IF
8 mm
PACKING CODE
PART NUMBER
PRODUCT DESC.
PAPER
BLISTER
PAPER
BLISTER
ED
ET7
EE
EF4
EA
EI
ET1
EG1
EB
ET5
EC
EL
ET6
E20
EA
EI
ET1
EG1
EB
ET5
EC
EL
ET6
E20
EA
EI
ET1
EG1
EB
ET5
EL
E20
EC
ET6
DIMENSIONS
L
T2
b
I
W
a
H
T1
SIZE
DIMENSIONS (in millimeters)
INCH
0402
METRIC
1005
L
1.0 ± 0.05
W
0.5 ± 0.05
H
0.35 ± 0.05
T1
0.25 ± 0.05
T2
0.2 ± 0.1
0603
1608
1.55
+ 0.10
- 0.05
+ 0.10
- 0.20
+ 0.10
- 0.20
0.85 ± 0.1
0.45 ± 0.05
0.3 ± 0.2
0.3 ± 0.2
0805
2012
2.0
1206
3216
3.2
SOLDER PAD DIMENSIONS (in millimeters)
REFLOW SOLDERING
WAVE SOLDERING
a
b
l
a
b
l
0.4
0.6
0.5
0.5
0.9
1.0
0.9
0.9
1.0
1.25 ± 0.15
0.45 ± 0.05
0.3 ± 0.2
0.3 ± 0.2
0.7
1.3
1.2
0.9
1.3
1.3
1.6 ± 0.15
0.55 ± 0.05
0.45 ± 0.2
0.4 ± 0.2
0.9
1.7
2.0
1.1
1.7
2.3
FUNCTIONAL PERFORMANCE
Pulse Power (W)
Maximum pulse dissipation as a function of the pulse duration, single pulse
10 000
1206
0805
0603
0402
1000
100
10
1
0.1
0.01
0.000001 0.00001 0.0001
0.001
0.01
0.1
1
10
100
Pulse Duration (s)
Maximum pulse load, single pulse; applicable if P 0 and n ≤ 1000 and Û ≤ Ûmax.;
for permissible resistance change equivalent to 8000 h operation
Document Number: 20024
Revision: 13-Oct-08
For technical questions, contact: [email protected]
www.vishay.com
2
D../CRCW....-IF e3
Lead (Pb)-free Thick Film, Rectangular,
Pulse Proof Chip Resistors
Vishay
Pulse Power (W)
Maximum pulse dissipation as a function of the pulse duration, continuous pulse
10 000
1206
0805
0603
0402
1000
100
10
1
0.1
0.01
0.000001 0.00001 0.0001
0.001
0.01
0.1
1
10
100
Pulse Duration (s)
Maximum pulse load, continuous pulses; applicable if P ≤ P (ϑamb) and Û ≤ Ûmax.;
for permissible resistance change equivalent to 8000 h operation
Pulse Voltage (V)
Maximum permissible pulse voltage as a function of pulse duration
800
1206
700
600
0805
500
400
300
0603
200
0402
100
0
0.00001
0.0001
0.001
0.01
0.1
1
10
Pulse Duration (s)
Maximum pulse voltage, single and continuous pulses; applicable if
P ≤ Pmax.; for permissible resistance change equivalent to 8000 h operation
Peak Voltage (V)
Single-pulse high voltage overload test 1.2/50 µs EN140000 4.27
1000
1206
0805
0603
0402
100
10
1
1
10
100
1000
10 000
100 000
Resistance Value (Ω)
Pulse load rating in accordance to EN 60115-1, 4.27; 1.2 µs/50 µs;
5 pulses at 12 s intervals; for permissible resistance change 1 %
www.vishay.com
3
For technical questions, contact: [email protected]
Document Number: 20024
Revision: 13-Oct-08
D../CRCW....-IF e3
Lead (Pb)-free Thick Film, Rectangular,
Pulse Proof Chip Resistors
Vishay
Peak Voltage (V)
Single-pulse high voltage overload test 10/700 µs EN140000 4.27
1000
1206
0805
0603
0402
100
10
1
1
10
100
1000
10 000
100 000
Resistance Value (Ω)
Temperature Rise in °C
Pulse load rating in accordance to EN 60115-1, 4.27; 10 µs/700 µs;
10 pulses at 1 min intervals; for permissible resistance change 1 %
90
80
0402 0603 0805
1206
70
60
50
40
30
20
10
0
0
0.1
0.2
0.3
0.4
0.5
Power in W
Temperature Rise
Document Number: 20024
Revision: 13-Oct-08
For technical questions, contact: [email protected]
www.vishay.com
4
D../CRCW....-IF e3
Lead (Pb)-free Thick Film, Rectangular,
Pulse Proof Chip Resistors
Vishay
TEST PROCEDURES AND REQUIREMENTS
EN 60115-1
REQUIREMENTS
PERMISSIBLE CHANGE (ΔR/R)
TEST (clause)
CONDITIONS OF TEST
STABILITY CLASS 1
OR BETTER
Stability for product types:
D../CRCW....-IF e3
Resistance (4.5)
-
1 Ω to 100 kΩ
±5%
± 10 %
20/- 55/20 °C and
20/125/20 °C
± 200 ppm/K
U = 2.5 × (P70 × R)1/2
≤ 2 × Umax.;
Duration: according the style
± (0.25 % R + 0.05 Ω)
Aging 4 h at 155 °C, dryheat
solder bath method; 235 °C; 2 s
visual examination
Good tinning (≥ 95 % covered)
no visible damage
Resistance to soldering heat (4.18.2)
Solder bath method;
(260 ± 5) °C; (10 ± 1) s
± (0.25 % R + 0.05 Ω)
Rapid change of temperature (4.19)
30 min at LCT = - 55 °C;
30 min at UCT = 125 °C; 5 cycles
± (0.25 % R + 0.05 Ω)
(40 ± 2) °C; 56 days;
(93 ± 3) % RH
± (1 % R + 0.05 Ω)
16 h at UCT = 125 °C; 1 cycle at 55 °C;
2 h at LCT = - 55 °C;
1 h/1 kPa at 15 °C to 35 °C;
5 cycles at 55 °C
U = (P70 × R)1/2
U = Umax.; whichever is less severe
± (1 % R + 0.05 Ω)
U = (P70 × R)1/2
U = Umax.; whichever is less severe
1.5 h on; 0.5 h off;
70 °C; 1000 h
± (1 % R + 0.05 Ω)
Duration extended to 8000 h
± (2 % R + 0.1 Ω)
UCT = 125 °C; 1000 h
± (1 % R + 0.05 Ω)
Temperature coefficient (4.8.4.2)
Overload (4.13)
Solderability (4.17.5)
Damp heat, steady state (4.24)
Climatic sequence (4.23)
Endurance at 70 °C (4.25.1)
Extended endurance (4.25.1.8)
Endurance at upper category temperature
(4.25.3)
APPLICABLE SPECIFICATIONS
• EN 60115-1
Generic Specification
• EN 140400
Sectional Specification
• EN 140401-802
Detail Specification
• IEC 60068-2-X
Variety of environmental test procedures
• IEC 60286-3
Packaging of SMD components
www.vishay.com
5
For technical questions, contact: [email protected]
Document Number: 20024
Revision: 13-Oct-08
Legal Disclaimer Notice
Vishay
Disclaimer
All product specifications and data are subject to change without notice.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf
(collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein
or in any other disclosure relating to any product.
Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any
information provided herein to the maximum extent permitted by law. The product specifications do not expand or
otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed
therein, which apply to these products.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this
document or by any conduct of Vishay.
The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless
otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such
applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting
from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding
products designed for such applications.
Product names and markings noted herein may be trademarks of their respective owners.
Document Number: 91000
Revision: 18-Jul-08
www.vishay.com
1
Similar pages