SAMWHA CS0603X7R104C6R3NBE Multi layer ceramic capacitor Datasheet

SMD Type
Multi Layer Ceramic Capacitors
Multi Layer Ceramic Capacitors
SMD Type
Shape & Dimensions
Introduction
SAMWHA's series of multilayer ceramic(MLC) chip capacitors is designed to meet a wide variety of need.
(Unit : mm)
Multilayer ceramic chip capacitors are available in both class I and class II formulations. Temperature
Dimensions
compensation formulations are class I and temperature stable and general application formulations are
classified at class II. The class I multilayer ceramic capacitors are COG with negligible dependence of
Code(inch)
Length
electrical properties on temperature, voltage, frequency. The most of commonly used class II dielectric are
Width
T1(min)
L
Tol(±)
W
Tol(±)
X7R, X5R and Y5V. The X7R provides intermediate capacitance values which vary ±15% over the
0603(0201)
0.60
0.03
0.30
0.03
0.05
temperature range of -55℃ to 125℃. The X5R provides intermediate capacitance values which vary ±15%
1005(0402)
1.00
0.05
0.50
0.05
0.05
over the temperature range of -55℃ to 85℃. The Y5V provides the highest capacitance value which vary
1608(0603)
1.60
0.15
0.80
0.10
0.10
from 22% to -82% over the temperature range of -30℃ to 85℃. All class II capacitors vary in capacitance
2012(0805)
2.00
0.20
1.25
0.15
0.10
value under the influence of temperature, operating voltage and frequency. We offer a complete line of
3216(1206)
3.20
0.30
1.60
0.20
0.15
3225(1210)
3.20
0.40
2.50
0.25
0.15
4520(1808)
4.50
0.40
2.00
0.25
0.20
4532(1812)
4.50
0.40
3.20
0.30
0.20
5750(2300)
5.70
0.50
5.00
0.40
0.30
products for both class I and II .
Features
*1608 Size ≥ 10㎌ ⇒ W : 0.8±0.15, T : 0.8±0.15
Samwha’s high density ceramic bodies offer superior performance and reliability
Samwha offer various temperature characteristics, rated voltage and packing method
Material with high dielectric constant and superior manufacturing technology allows very high values
in a small size
Solder coated terminals offer superior solderability
Applications
Wide applications throughout commercial and industrial market.
How to Order(Product Identification)
CS 1608 X7R 104 K 160 N R B
Type
Size Code
CS : SMD
This is expressed in tens of a millimeter.
SA : ARRAY
The first two digits are the length, the last two digits are width.
Size(mm)
0603
1005
1608
2012
3216
3225
4520
4532
5750
Communication products like Cellular Phone, Pager, Codeless phone
Multimedia products like DVD, CD-ROM, FDD, HDD, Game machine, Computer, Note book,
Digital camera, LCD
Audio visual products like TV, Camcorder, Minidisk, MP3 Player
Communication products like Electronic tuner, Duplexer, VCXO, TCXO, Modem
www.samwha.com
OA equipment products like Printer, Copy Machine, Fax Machine
4
SAMWHA CAPACITOR Co., Ltd.
Temperature Coefficient Code
Temperature
Characteristice
Temperature
Range
Capacitance Change or
Temperature Coefficient
Operating
Temperature Range
C0G
-55 to 125℃
0±30ppm/℃
-55 to 125℃
X7R
-55 to 125℃
±15%
-55 to 125℃
X5R
-55 to 85℃
±15%
-55 to 85℃
Y5V
-30 to 85℃
+22, -82%
-30 to 85℃
Multi Layer Ceramic Capacitors
5
SMD Type
Multi Layer Ceramic Capacitors
Typical Performance Characteristics
Capacitance Code(Pico Farads)
The nominal capacitance value in pF is expressed by three digit numbers.
COG
The first two digits represents significant figures and the last digit denotes the number of zero
Ex.) 104 = 100000pF
R denotes decimal
8R2 = 8.2pF
Application
Suited for precision circuits, requiring stable dielectric characteristics, negligible dependence of capacitance and
Capacitance Tolerance Code
dissipation factor on time, voltage and frequency.
Code
Tolerance
Code
Tolerance
B
±0.1pF
M
±20%
Dielectric Characteristics
C
±0.25pF
P
+100, -0%
Temperature Characteristic
0±30ppm/℃
D
±0.5pF
Z
+80, -20%
Operating Temperature
-55~125℃
F
±1.0%
H
+0.25/-0pF
Capacitance Tolerance
G
±2.0%
I
+0/-0.25pF
10pF : ±5%, ±10%, (±1%, ±2%, ±20%)
≤10pF : ±0.1pF, ±0.25pF, ±0.5pF
J
±5%
U
+5/-0%
Dissipation Factor & Q
K
±10%
V
+0/-5%
≥30pF : DF≤0.1%, Q≥1000
30pF :
Q≥400+20×C
Insulation Resistance
More than 10,000MΩor 500ΩF
(Whichever is smaller)
Voltage Code
Code
6R3
100
160
250
500
101
201
251
631
302
Vol.
DC 6.3V
DC 10V
DC 16V
DC 25V
DC 50V
DC 100V
DC 200V
DC 250V
DC 630V
DC 3000V
Termination Code
3×RVDC
Test Voltage
0.5 to 5Vrms(≤1000pF), 1±0.2Vrms(>1000pF)
Test Frequency
1±0.1M㎐(≤1000pF), 1±0.1k㎐(>1000pF)
X7R
Ex.) N : Ni-Sn (Nickel-Tin Plate)
Application
Packing Code
Ex.) R : Reel Type
Dielectric Strength
Stable class Ⅱdielectric properties, suited for by-pass and coupling purposes, filtering, frequency discrimination, DC
B : Bulk Type
blockage, and as voltage transient suppression elements.
Thickness Option
Code
(Unit : mm)
Thickness(mm)
Code
Thickness(mm)
Dimensions
W
Tol(±)
L
Tol(±)
Blank
0.30
0.03
E
1.30
0.20
Blank
0.50
0.05
H
1.35
0.20
A
0.60
0.10
I
1.60
0.20
B
0.80
0.10
J
1.80
0.20
B
0.85
0.15
K
2.00
0.25
E
1.00
0.15
L
2.50
0.25
E
1.10
0.15
M
2.80
0.30
E
1.15
0.15
N
3.20
0.30
E
1.25
0.15
O
5.00
0.40
www.samwha.com
6
Dimensions
SAMWHA CAPACITOR Co., Ltd.
Dielectric Characteristics
Temperature Characteristic
±15%
Operating Temperature
-55~125℃
Capacitance Tolerance
±10%, ±20%, (±5%, +80~-20%)
Dissipation Factor & Q
50V Min. : 2.5% Max. 25V Min. : 3.0% Max.
16V Min. : 3.5% Max. 10V Min. : 5.0% Max.
6.3V Min. : 5.0% Max.(<3.3㎌), 10% Max.(≥3.3㎌)
Thin layer lange capacitors type 10% Max.
Insulation Resistance
More than 10,000MΩor 500ΩF(Whichever is smaller)
Thin layer lange capacitors type 50ΩF Min.
Dielectric Strength
>2.5×RVDC
Test Voltage
1±0.2Vrms(≤10㎌, 10V Min.)
0.5±0.1Vrms(≤10㎌, 6.3V Max.)
0.5±0.1Vrms(>10㎌)
Test Frequency
1±0.1k㎐(≤10㎌, 10V Min.)
1±0.1k㎐(≤10㎌, 6.3V Max.)
120±24㎐(>10㎌)
Multi Layer Ceramic Capacitors
7
SMD Type
Multi Layer Ceramic Capacitors
X5R
Appendix Ⅰ
Application
C0G-Temperature Compensating Type(0603~3216)
Stable class Ⅱdielectric properties, suited for by-pass and coupling purposes, filtering, frequency discrimination, DC
blockage, and as voltage transient suppression elements.
Type
Size(inch)
Volt(V)
Cap.
Dielectric Characteristics
Temperature Characteristic
±15%
Operating Temperature
-55~85℃
Capacitance Tolerance
±10%, ±20%, (±5%, +80~-20%)
Dissipation Factor & Q
50V Min. : 2.5% Max. 25V Min. : 3.0% Max.
16V Min. : 3.5% Max. 10V Min. : 5.0% Max.
6.3V Min. : 5.0% Max.(<3.3㎌), 10% Max.(≥3.3㎌)
Thin layer lange capacitors type 10% Max.
Insulation Resistance
More than 10,000MΩ or 500ΩF (Whichever is smaller)
Thin layer lange capacitors type 50ΩF Min.
Dielectric Strength
>2.5×RVDC
Test Voltage
1±0.2Vrms(≤10㎌, 10V Min.)
0.5±0.1Vrms(≤10㎌, 6.3V Max.)
0.5±0.1Vrms(>10㎌)
Test Frequency
1±0.1k㎐(≤10㎌, 10V Min.)
1±0.1k㎐(≤10㎌, 6.3V Max.), 120±24㎐(>10㎌)
Y5V
Application
The Hi-K(Y5V) dielectrics deliver high capacitance density and are ideally suited for applications where space is at a
premium, or as replacement for tantalum capacitors. Typically applications include use as by-pass or decoupling elements.
Best performance is obtained at or near room temperature, with low DC bias.
Dielectric Characteristics
www.samwha.com
Temperature Characteristic
+22%~-82%
Operating Temperature
-30~85℃
Capacitance Tolerance
-20~+80%(±20%)
Dissipation Factor & Q
50V Min. : 5% Max. 25V Min. : 7% Max.
16V Min. : 9% Max. 10V Min. : 12.5% Max.
6.3V Min. : 15% Max.
Thin layer lange capacitors type 20% Max.
Insulation Resistance
More than 10,000MΩor 500ΩF(Whichever is smaller)
Thin layer lange capacitors type 50ΩF Min.
Dielectric Strength
>2.5×RVDC
Test Voltage
1±0.2Vrms(≤10㎌, 10V Min.)
0.5±0.1Vrms(≤10㎌, 6.3V Max.)
0.5±0.1Vrms(>10㎌)
Test Frequency
1±0.1k㎐(≤10㎌, 10V Min.)
1±0.1k㎐(≤10㎌, 6.3V Max.), 120±24㎐(>10㎌)
8
SAMWHA CAPACITOR Co., Ltd.
0603(0201)
25
1005(0402)
25
50
C0G
1608(0603)
25
50
2012(0805)
25
3216(1206)
50
25
50
0.5㎊(0R5)
1㎊(010)
2㎊(020)
3㎊(030)
4㎊(040)
5㎊(050)
6㎊(060)
7㎊(070)
8㎊(080)
9㎊(090)
10㎊(100)
12㎊(120)
15㎊(150)
18㎊(180)
22㎊(220)
27㎊(270)
33㎊(330)
39㎊(390)
47㎊(470)
56㎊(560)
68㎊(680)
82㎊(820)
100㎊(101)
120㎊(121)
150㎊(151)
180㎊(181)
220㎊(221)
270㎊(271)
330㎊(331)
390㎊(391)
470㎊(471)
560㎊(561)
680㎊(681)
820㎊(821)
1000㎊(102)
1200㎊(122)
1500㎊(152)
1800㎊(182)
2200㎊(222)
2700㎊(272)
3300㎊(332)
3900㎊(392)
4700㎊(472)
5600㎊(562)
6800㎊(682)
8200㎊(822)
10000㎊(103)
12000㎊(123)
15000㎊(153)
18000㎊(183)
22000㎊(223)
27000㎊(273)
33000㎊(333)
47000㎊(473)
56000㎊(563)
68000㎊(683)
82000㎊(823)
0.1㎌(104)
Temperature Compensating Type : Dissipation Factor Page 22 (No.5)
Multi Layer Ceramic Capacitors
9
SMD Type
Multi Layer Ceramic Capacitors
Appendix Ⅱ
X7R-High Dielectric Constant Type(0603~3225) & Thin Layer Large-Capacitance Type
Type
Size(inch)
Volt(V)
Cap.
Type
X7R
0603(0201)
1005(0402)
1608(0603)
2012(0805)
X5R-High Dielectric Constant Type(0603~3225) & Thin Layer Large-Capacitance Type
3216(1206)
3225(1210)
6.3 10 16 25 6.3 10 16 25 50 6.3 10 16 25 50 6.3 10 16 25 50 6.3 10 16 25 50 6.3 10 16 25 50
Size(inch)
Volt(V)
Cap.
100㎊(101)
100㎊(101)
470㎊(471)
470㎊(471)
1000㎊(102)
1000㎊(102)
2200㎊(222)
2200㎊(222)
4700㎊(472)
4700㎊(472)
10000㎊(103)
10000㎊(103)
15000㎊(153)
15000㎊(153)
22000㎊(223)
22000㎊(223)
33000㎊(333)
33000㎊(333)
47000㎊(473)
47000㎊(473)
68000㎊(683)
68000㎊(683)
0.1㎌(104)
0.1㎌(104)
0.15㎌(154)
0.15㎌(154)
0.22㎌(224)
0.22㎌(224)
0.33㎌(334)
0.33㎌(334)
0.47㎌(474)
0.47㎌(474)
0.68㎌(684)
0.68㎌(684)
1.0㎌(105)
1.0㎌(105)
1.5㎌(155)
1.5㎌(155)
2.2㎌(225)
2.2㎌(225)
4.7㎌(475)
4.7㎌(475)
6.8㎌(685)
6.8㎌(685)
10㎌(106)
10㎌(106)
22㎌(226)
22㎌(226)
47㎌(476)
47㎌(476)
100㎌(107)
100㎌(107)
www.samwha.com
10
X5R
0603(0201)
1005(0402)
1608(0603)
2012(0805)
3225(1210)
6.3 10 16 25 6.3 10 16 25 50 6.3 10 16 25 50 6.3 10 16 25 50 6.3 10 16 25 50 6.3 10 16 25 50
General Type : Dissipation Factor Page 22 (No.5)
General Type : Dissipation Factor Page 22 (No.5)
General Type : Dissipation Factor Page 22 (No.5)
General Type : Dissipation Factor Page 22 (No.5)
Thin Layer Large-Capacitance Type : Dissipation Factor Page 22 (No.5)
Thin Layer Large-Capacitance Type : Dissipation Factor Page 22 (No.5)
SAMWHA CAPACITOR Co., Ltd.
32169(1206)
Multi Layer Ceramic Capacitors
11
SMD Type-High Voltage
Multi Layer Ceramic Capacitors
SMD Type-High Voltage
Y5V-High Dielectric Constant Type(0603~3225) & Thin Layer Large-Capacitance Type
Type
Size(inch)
Y5V
1005(0402)
1608(0603)
2012(0805)
3216(1206)
3225(1210)
Volt(V)
Cap.
6.3 10 16 25 50 6.3 10 16 25 50 6.3 10 16 25 50 6.3 10 16 25 50 6.3 10 16 25 50
1000㎊(102)
Product Offering
SAMWHA high voltage MLCC products with COG(NPO) and X7R temperature characteristic are designed
for commercial and industrial applications.
The products are power supply and voltage multiplier circuits applications in various sizes with working
2200㎊(222)
voltages up to DC 3.0 KV .
4700㎊(472)
These high voltage capacitors feature a special internal electrode design which reduces voltage
10000㎊(103)
concentrations by distributing voltage gradients throughout the entire capacitor.
15000㎊(153)
This unique design also affords that capacitance value is increased in a given case size and voltage rating.
22000㎊(223)
33000㎊(333)
Features
47000㎊(473)
High reliability
68000㎊(683)
High voltage ratings
0.1㎌(104)
0.15㎌(154)
Wide voltage level : from 100V to 3000V
Surface mount suited for Wave and Reflow Soldering
Tape & reel surface mount assembly
0.22㎌(224)
Suitable for Back-Lighting Inverter, DC-DC Converters, Ballast, Modems & Power Supply, LAN/WLAN
0.33㎌(334)
interface... etc.
0.47㎌(474)
0.68㎌(684)
1.0㎌(105)
How to Order(Product Identification)
1.5㎌(155)
2.2㎌(225)
CS 4520 COG 150 J 302 N R E
3.3㎌(335)
4.7㎌(475)
6.8㎌(685)
10㎌(106)
22㎌(226)
Type
CS : SMD
47㎌(476)
100㎌(107)
General Type : Dissipation Factor Page 22 (No.5)
www.samwha.com
General Type : Dissipation Factor Page 22 (No.5)
Thin Layer Large-Capacitance Type : Dissipation Factor Page 22 (No.5)
Size Code
Size(mm)
1608
2012
3216
3225
4520
4532
Dielectric (Temp. Coefficient)
COG, X7R
Capacitance
1st two digits are value, 3rd digit denotes number of zeros;
331 = 330pF, 104 = 100000pF, 8R2C = 8.2pF
12
SAMWHA CAPACITOR Co., Ltd.
Multi Layer Ceramic Capacitors
13
SMD Type-High Voltage
Multi Layer Ceramic Capacitors
Shape & Dimensions
Tolerance
Code
Tolerance
Code
Tolerance
B
±0.1pF
C
±0.25pF
D
±0.50pF
F
±1%
G
±2%
J
±5%
K
±10%
M
±20%
Z
+80~-20%
(Unit : mm)
Dimensions
Rated Voltage Code
Code
1st two digits are value, 3rd digit denotes number of zeros; 302 = 3000V, 251 = 250V
Plating
Packing
Ni / Sn Plated
B : Bulk Pack
R : Reel Pack
Thickness Option
Code
(Unit : mm)
Thickness(mm)
Dimensions
Code
Length
Width
T1(min)
L
Tol(±)
W
Tol(±)
1608(0603)
1.60
0.15
0.80
0.10
0.10
2012(0805)
2.00
0.20
1.25
0.15
0.10
3216(1206)
3.20
0.30
1.60
0.20
0.15
3225(1210)
3.20
0.40
2.50
0.25
0.15
Thickness(mm)
Dimensions
4520(1808)
4.50
0.40
2.00
0.25
0.20
W
Tol(±)
4532(1812)
4.50
0.40
3.20
0.30
0.20
5750(2300)
5.70
0.50
5.00
0.40
0.30
L
Tol(±)
Blank
0.30
0.03
E
1.30
0.20
Blank
0.50
0.05
H
1.35
0.20
A
0.60
0.10
I
1.60
0.20
B
0.80
0.10
J
1.80
0.20
B
0.85
0.15
K
2.00
0.25
E
1.00
0.15
L
2.50
0.25
E
1.10
0.15
M
2.80
0.30
E
1.15
0.15
N
3.20
0.30
E
1.25
0.15
O
5.00
0.40
*1608 Size ≥ 10㎌ ⇒ W : 0.8±0.15, T : 0.8±0.15
Typical Performance Characteristics
COG(NPO)
Dielectric Characteristics
X7R
Dielectric Classification
Ultra Stable
Stable
Rated temperature range
-55℃ to +125℃
-55℃ to +125℃
TCC(Temperature Characteristics Coefficient)
0±30ppm
±15%
Dissifation Factor(tan δ)
C≥30pF : Q≥1,000 (DF:≤ 0.1%)
2.5% Max.
C<30pF : Q≥400+20C(DF: ≤1/(400+20C))
www.samwha.com
14
SAMWHA CAPACITOR Co., Ltd.
IR(Insulation Resistance)
500V Below : Rated voltage 60sec
500V Above : 500V 60sec
More than 10,000 ㏁
500V Below:Rated voltage 60sec
500V Above:500V 60sec
-DC100V~1KV
:C≥0.01㎌:More than 100㏁㎌
:C<0.01㎌:More than 10,000㏁
-DC2~3KV:More than6,000 ㏁
Capacitance Tolerance
<10pF : ±0.25pF, ±0.5pF
≥10pF : ±5%, ±0%
±10%, ±20%
Dielectric strength
630V:150% Rated Voltage
1kV~3.15kV:120% Rated Voltage
100V:150% Rated Voltage
630V:150% Rated Voltage
1kV~3.15kV: 120% Rated Voltage
Aging characteristics
0%
2.5% per decade hr, typical
Multi Layer Ceramic Capacitors
15
SMD Type-High Voltage
Multi Layer Ceramic Capacitors
Appendix High Voltage Type(100V~3000V)
COG-Temperature Compensation Type
Type
Size(inch)
Volt(V)
Cap.
X7R-High Dielectric Type
Type
C0G
1608(0603) 2012(0805)
3216(1206)
3225(1210)
4520(1808)
4532(1812)
100 250 100 250 100 250 630 1000 2000 100 250 630 1000 2000 100 250 630 1000 2000 3000 100 250 630 1000 2000 3000
4.7㎊(4R7)
5㎊(050)
7㎊(070)
Size(inch)
Volt(V)
Cap.
X7R
1608(0603) 2012(0805)
3216(1206)
3225(1210)
4520(1808)
4532(1812)
100 250 100 250 100 250 630 1000 2000 100 250 630 1000 2000 100 250 630 1000 2000 3000 100 250 630 1000 2000 3000
220㎊(221)
330㎊(331)
470㎊(471)
8㎊(080)
9㎊(090)
10㎊(100)
680㎊(681)
1000㎊(102)
12㎊(120)
1500㎊(152)
15㎊(150)
2200㎊(222)
18㎊(180)
3300㎊(332)
22㎊(220)
47㎊(470)
4700㎊(472)
5600㎊(562)
56㎊(560)
68㎊(680)
82㎊(820)
6800㎊(682)
10000㎊(103)
100㎊(101)
15000㎊(153)
220㎊(221)
18000㎊(183)
330㎊(331)
22000㎊(223)
470㎊(471)
560㎊(561)
33000㎊(333)
47000㎊(473)
680㎊(681)
1000㎊(102)
1500㎊(152)
68000㎊(683)
0.1㎌(104)
2200㎊(222)
0.15㎌(154)
2700㎊(272)
0.22㎌(224)
3300㎊(332)
0.33㎌(334)
4700㎊(472)
5600㎊(562)
0.47㎌(474)
0.68㎌(684)
6800㎊(682)
10000㎊(103)
15000㎊(153)
www.samwha.com
22000㎊(223)
1.0㎌(105)
2.2㎌(225)
High voltage type
33000㎊(333)
High voltage type
16
SAMWHA CAPACITOR Co., Ltd.
Multi Layer Ceramic Capacitors
17
SMD Type-High Voltage
Multi Layer Ceramic Capacitors
Application(Typical circuit)
DC-DC Converter
Caution(Rating)
Switching Power Supply
1. Operating Voltage
When DC-rated capacitors are to be used in AC or ripple current circuits, be sure to maintain the Vp-p Value of the
applied voltage or the Vo-p which contains DC bias within the rated voltage range.
When the voltage is applied to the circuit, starting or stopping may generate irregular voltage for a transit period
because of resonance or switching. Be sure to use a capacitor with a rated voltage range that includes these
irregular voltages.
Voltage
DV Voltage
DC+AC Voltage
AC Voltage
Pulse Voltage(1)
Pulse Voltage(2)
Positional
Measurement
C2 : X7R ; 250V 10nF~47nF
C3 : COG ; 630V 47pF~100pF
C3 : COG, X7R ; 2kV 100pF~1000pF
C4 : COG, X7R ; 2kV 100pF~1000pF
2. Test condition for AC withstanding Voltage
(1) Test Equipment
Primary circuit and Snubber switching power supply
Tests for AC withstanding voltage should be made with equipment capable of creating a wave similar to a 50/60
Hz sine wave. If the distorted sine wave or overload exceeding the specified voltage value is applied, a defect
may be caused.
(2) Voltage applied method
The capacitor's leads or terminals should be firmly connected to the output of the withstanding voltage test
equipment, and then the voltage should be raised from near zero to the test voltage. If the test voltage is applied
C1, C2 : COG or X7R 1000pF~4700pF
C4
: COG ; 2kV 100pF~330pF
C5
: COG ; 1kV/2kV 100pF~470pF
directly to the capacitor without raising it from near zero,it should be applied with the
*zero cross. At the end of the test time, the test voltage should be reduced to near
zero, and then the capacitor's leads or terminals should be taken off the output of the
withstanding voltage test equipment. If the test voltage is applied directly to the
capacitor without raising it from near zero, surge voltage may occur and cause a
defect.
*ZERO CROSS is the point where voltage sine wave
(3) Dielectric strength testing method
LCD back light Inverter
In case of dielectric strength test, the capacitor’s is applied between the terminations for 1 to 5 sec., provided the
charge/discharge current is less than 50mA.
3. Soldering
C2 : COG ; 3kV 10 ~100pF
If a chip component is heated or cooled abruptly during soldering, it may crack due to the thermal shock. To
prevent this, follow our recommendations below for adequate soldering conditions. Carefully perform preheating
so that temperature difference (ΔT) between the
solder and component surface is in the following
www.samwha.com
range. The smaller the temperatures difference (Δ
T) between the solder and component surface is,
Chip Size
Slodering Method
3.2×1.6mm
and under
Reflow Method or
Soldering Lron Method
ΔT
190℃
3.2×2.5mm
and over
ΔT
130℃
the smaller the influence on the chip is.
18
SAMWHA CAPACITOR Co., Ltd.
Multi Layer Ceramic Capacitors
19
SMD Type
Multi Layer Ceramic Capacitors
SAMWHA CAPACITOR CO., LTD offers a line of MLCC(Multilayer Ceramic Capacitor).
These parts are rated at 3kV dc and safety approved and certified to UL
(Underwriters Laboratories Inc.
)
Reliability and Test Conditions(General Type)
Characteristic
No.
Item
Temperature
Compensating Type
High Dielectric Constant Type
X7R : -55 to +125℃ X5R : -55 to +85℃
Y5V : -30 to +85℃
Test Methods
and Conditions
1
Operating
Temperature Range
C0G : -55 to +125℃
2
Insulation Resistance
More than 10,000MΩ or 500ΩF(Whichever is smaller)
- Applied the rated voltage for 2
minutes of charging.
- The charge/discharge current is
less than 50mA.
3
Dielectric Strength
No defects or abnormalities
- C0G : The rated voltage×300%
- X7R, X5R, Y5V : 〃 ×250%
- Applied between the terminations
for 1 to 5 seconds.
- The charge/discharge current is
less than 50mA.
4
Capacitance
Within the specified tolerance
5
Dissipation Factor
30㎊ Min. :
Q≥1,000 (DF≤0.1%)
30㎊ Max. :
Q≥400+20C
(DF≤1/(400+20C))
6
Solderability of
Termination
Char. 50V Min. 25V
16V
10V
6.3V
X7R ≤2.5%/ ≤3%/ ≤3.5%/ ≤5%/ ≤5%/
X5R
≤5% ≤7% ≤7% ≤10% ≤10%
Y5V
≤5%/ ≤7%/ ≤9% ≤12.5%/
≤15%
≤9% ≤9% ≤12.5% ≤15%
You can check the specification at
the appendix for each product
with mark
Termination should be covered with more than
75% of new solder
The capacitance/Q/D.F. should be
measured at 25℃ at the frequency
and voltage shown in the table.
Testing
Frequency
Testing
Voltage
C0G
(C≤1000pF)
1±0.1M㎐
0.5 to 5Vrms
C0G
(C >1000pF)
1±0.1k㎐
1±0.2Vrms
X7R, X5R, Y5V
(C≤10㎌
6.3V Min.)
1±0.1k㎐
1±0.2Vrms
X7R, X5R, Y5V
(C >10㎌)
120±24㎐
0.5±0.1Vrms
Cap.
- Pb-Free Type
Solder : 96.5Sn-3Ag-0.5Cu
Solder Temperature : 260±5℃
Immersion Time : 3±0.1sec
- Pre-Heating
at 80~120℃ for 10~30sec
7
Resistance Appearance No marked defect
to
Capacitchange Within ±2.5% or ±0.25㎊ X7R, X5R : ≤ ±7.5%
Soldering
(whichever is larger) Y5V
: ≤ ±20%
Heat
Dissipation
Factor
(or Q)
www.samwha.com
I.R.
20
SAMWHA CAPACITOR Co., Ltd.
30㎊ Min. :
Q≥1,000 (DF≤0.1%)
30㎊ Max. :
Q≥400+20C
(DF≤1/(400+20C))
Char. 50V Min. 25V
16V
10V
6.3V
X7R ≤2.5%/ ≤3%/ ≤3.5%/ ≤5%/ ≤5%/
X5R ≤5% ≤7% ≤7% ≤10% ≤10%
Y5V
≤5%/ ≤7%/ ≤9% ≤12.5%/
≤15%
≤9% ≤9% ≤12.5% ≤15%
More than 10,000MΩ or 500Ω.F (Whichever is smaller)
- Preheat the capacitor at 120 to 150℃
for 1 minute. (Preheating for 3225,
4520, 4532 Step1 : 100℃ to 120℃, 1min
Step2 : 170℃ to 200℃, 1min) Immerse the
capacitor in a eutectic solder solution
- Soldering Temp. : 260±5℃
- Immersion Time : 10±0.5sec
- Initial measurement
Perform a heat treatment at 150+0, -10℃
for one hour and then let sit for 48±4
hours at room temperature.
Perform the intial measurement.
- Measurement after test
Take it out and set it for 24±2 hours
(temperature compensating type)
or 48±4 hours (high dielectric constant
type)then measure
Multi Layer Ceramic Capacitors
21
SMD Type
Multi Layer Ceramic Capacitors
Characteristic
Item
No.
8
Temperature Appearance
Cycle
Temperature
Compensating Type
Dissipation
Factor
(or Q)
9
Humidity
Load
High Dielectric Constant Type
30㎊ Min. :
Q≥1,000 (DF≤0.1%)
30㎊ Max. :
Q≥400+20C
(DF≤1/(400+20C))
X7R, X5R : Within ±7.5%
Y5V
: Within ±20%
Char. 50V Min. 25V
16V
Step
10V
≤5%/ ≤5%/ ≤5%/ ≤7.5%/ ≤7.5%/
≤7.5% ≤10% ≤10% ≤12.5% ≤12.5%
Y5V
≤7.5%/ ≤10%/ ≤12.5% ≤15%/
≤20%
≤12.5% ≤12.5% ≤15% ≤20%
More than 10,000MΩor 500Ω.F(Whichever is smaller)
Appearance
No marking defects
Dissipation
Factor
(or Q)
I.R.
Appearance
10 High
Temperature
Capacitance
Load
Change
Dissipation
Factor
(or Q)
30㎊ Min. :
Q≥200 (DF≤0.5%)
30㎊ Max. :
Q≥100 +10/3C
(DF≤1/(100+10/3C))
www.samwha.com
22
1
2
3
X7R, X5R : Within ±12.5%
Y5V
: Within +30%, -40%
(Y5V/1.0㎌, 2.2㎌, 4.7㎌/10V)
Within ±30% (others)
Char. 50V Min. 25V
16V
10V
6.3V
X7R
X5R
≤5%/ ≤5%/ ≤5%/ ≤7.5%/ ≤7.5%/
≤7.5% ≤10% ≤10% ≤12.5% ≤12.5%
Y5V
≤7.5%/ ≤10%/ ≤12.5% ≤15%/
≤20%
≤12.5% ≤12.5% ≤15% ≤20%
Item
Temperature
Compensating Type
High Dielectric Constant Type
11 Bending
Strength
- Board Thickness :
1.6mm
0.8mm(0603/1005size)
Min.
Max.
Temp. Operating Room Operating Room
(℃) Temp. Temp. Temp. Temp.
+0, -3
+3, -0
Time
2 to 3
30±3 2 to 3
(Min) 30±3
※ Test Condition
- Bending Limit : 1mm
- Pressurizing Speed : 1mm/sec
- Initial measurement
Perform a heat treatment at 150+0,
-10℃ for one hour and then let sit
for 48±4 hours at room temperature.
- Measurement after test
Take it out and set it for 24±2 hours
(temperature compensating) or
48±4 hours(high dielectric constant
type) at room temperature, then
measure.
- Humidity : 90~95%
No cracking or marking defects shall occur
Capacitance Within ±5% or ±0.5㎊
Change
(whichever is larger)
X7R, X5R : Within ±12.5%
Y5V
: Within ±30%
12 Vibration Appearance No defects or abnormalities
Resistance
Capacitance Whin the specified tolerance
- Hour : 500±12hrs
Q/DF
- Test Voltage : The rated voltage
- Take it out and set it for 24±2 hours
(temperature compensating) or
48±4 hours(high dielectric constant
type) at room temperature, then
measure.
The charge/discharge current is
less than 50mA
30㎊ Min. :
Q 1,000 (DF 0.1%)
30㎊ Max. :
Q 400+20C
(DF 1/ (400+20C))
Char. 50V Min. 25V
16V
10V
6.3V
X7R ≤2.5%/ ≤3%/ ≤3.5%/ ≤5%/ ≤5%/
X5R ≤5% ≤7% ≤7% ≤10% ≤10%
Y5V
≤5%/ ≤7%/
≤9% ≤9%
≤9% ≤12.5%/
≤15%
≤12.5% ≤15%
More than 500MΩor 25Ω.F(Whichever is smaller)
No marking defects
Within ±3% or ±0.3㎊
(whichever is larger)
30㎊ Min. :
Q≥350 (DF≤0.3%)
10㎊≤Cp ≤30㎊ :
Q≥275 +5/2C
(DF≤1/(275+5/2C))
Shown in Fig. After soldering and
then let sit for 24+4hr(temperature
compensating type), 48±4hr (high
dielectric constant type) at room
temperature.
The capacitor should be subjected
to a simple harmonic motion having
a total amplitude of 1.5mm, the
frequency being varied uniformly
between the approximate limits of
10 and 55Hz, shall be traversed(from
10Hz to 55Hz then 10Hz again) in
approximately 1 minute.
This motion shall be applied for a
period of 2 hours in each 3mutually
perpendicular directions(total is
6hours).
- Testing time : 1000±12hrs
X7R, X5R : Within ±12.5%
Y5V
: Within ±30%(Cap. < 1.0㎌)
Within +30%, -40%
(Cap. ≥ 1.0㎌)
Char. 50V Min. 25V
16V
10V
6.3V
X7R ≤5%/ ≤5%/ ≤5%/ ≤7.5%/ ≤7.5%/
X5R ≤7.5% ≤10% ≤10% ≤12.5% ≤12.5%
Y5V
≤7.5%/ ≤10%/ ≤12.5% ≤15%/
≤20%
≤12.5% ≤12.5% ≤15% ≤20%
More than 10,000MΩ or 50Ω.F(Whichever & Smaller)
SAMWHA CAPACITOR Co., Ltd.
Test Methods
and Conditions
- Substrate Material :
Glass EPOXY Board
4
- Temperature : 40±2℃
10㎊ Max. :
Q≥200+10C
(DF≤1/(200+10C))
I.R.
6.3V
X7R
X5R
I.R.
Capacitance Within ±7.5% or ±0.75㎊
Change
(whichever is larger)
No.
Perform the five cycless according
to the four heat treatments listed in
the following table.
No marking defects
Capacitance Within ±2.5% or ±0.25㎊
Change
(whichever is larger)
Characteristic
Test Methods
and Conditions
- Applied voltage :
Rated voltage < DC250V : ×200%
- Temperature :
C0G, X7R → 125±3℃
X5R , Y5V → 85±3℃
- Measurement after test
Take it out and set it for 24±2
hours(temperature compensating
type)or 48±4 hours (high dielectric
constant type) at room temperature,
then measure.
The charge/discharge current is
less than 50mA.
13 Humidity
Steady
State
Appearance No marking defects
Capacitance Within ±5% or ±0.5㎊
Change
(whichever is larger)
Dissipation
(or Q)
30㎊ Min. :
Q≥350 (DF≤0.3%)
10㎊≤Cp ≤30㎊ :
Q≥275 +5/2C
(DF≤1/(275+5/2C))
- Temperature : 40±2℃
- Humidity : 90~95%
X7R, X5R : Within ±12.5%
Y5V
: Within ±30%
Char. 50V Min. 25V
16V
- Hour : 500±12hours
10V
6.3V
X7R
X5R
≤5%/ ≤5%/ ≤5%/ ≤7.5%/ ≤7.5%/
≤7.5% ≤10% ≤10% ≤12.5% ≤12.5%
Y5V
≤7.5%/ ≤10%/ ≤12.5% ≤15%/
≤20%
≤12.5% ≤12.5% ≤15% ≤20%
- Measurement after test
Take it out and set it for 24±2 hours
(temperature compensating type) or
48±4 hours(high dielectric constant
type) at room temperature, then
measure.
10㎊ Max. :
Q≥200+10C
(DF≤1/(200+10C))
I.R
More than 1,000MΩor 50Ω.F (Whichever is Smaller)
Multi Layer Ceramic Capacitors
23
Radial & Axial
Multi Layer Ceramic Capacitors
Radial & Axial
Characteristic
No.
Item
Temperature
Compensating Type
14 Capacitance Capacitance
Temperature Change
Characteristics
Temperature
Coefficient
Char.
Temp.
Range
Test Methods
and Conditions
High Dielectric Constant Type
Char.
Temp.
Range
X7R
-55 to
+125℃
X5R
-55 to
+85℃
Y5V
-30 to
+85℃
Reference
Temp.
Cap.
Change
Within
±15%
25℃
Temperature
Coefficient
-55 to
C0G
±30ppm/℃
+125℃
Within
±15%
Within
22%
-82%
(1) Temperature Compensating Type:
The temperature coefficient is
determined using the capacitance
measured in step 3 as a reference,
When cycling the temperature
sequentially from step 1 through 5,
(C0G: +25 to 125℃) the capacitance
shall be with in the specified
tolerance for the temperature
coefficient.
The capacitance drift is calculated
by dividing the difference
between the maximum measured
values in the step 1, 3 and 5 by the
Cap. value in step 3
Step
Temperature(℃)
1
25±2
2
-55±3
3
25±2
4
125±3(for C0G)
5
25±2
Features
This widely used ceramic capacitors includes both monolithic and multilayer types to provide a wide
capacitance range of 1pF through 1㎌ in respectly one standard size and shape(Radial & Axial).
Applications
The class1 temperature compensating(C0G) products can be used in circuits to stabilize frequency and
temperature characteristics.
The X7R, Z5U, Y5V dielectrics are optimum for by pass capacitors.
Shape and Dimensions
Bulk Type
Radial Type
(2) High Dielectric Constant Type :
The ranges of capacitance
change compared with the 25℃
value over the temperature
range shown in the table shall
be in the specified range.
CODE
051B
077B
15
16
Preservation(keeping) ※When solderability is considered, capacitors are
recommended to be used in 12 months
The regulation of
environmental
pollution materials.
L
Max.
W
Max.
5.5
5.5
7.7
7.6
T
Max.
H
Max.
P
±0.7
Ød
Color
Marking
5
0.5
Orange
or Gold
Ex) 104
6.4
3.2
9.2
(1) Temperature : 25℃ ±10℃
(2) Relative Humidity : Below 70% RH
※Never use materials mentioned below in MLCC products regulated this document.
Pb, Cd, Hg, Cr+6, PBB(polybromide biphenyl), PBDE(polybrominated diphenyl ethers), asbestos.
- In case of high Voltage and thin layer type Capacitor, it can be different from nomal specification.
So Please ask to our sales person.
Flat Type
Radial Type
Axial Type
www.samwha.com
24
SAMWHA CAPACITOR Co., Ltd.
Multi Layer Ceramic Capacitors
25
Radial & Axial
Multi Layer Ceramic Capacitors
Code
Dimensions
Tolerance
Code
Dimensions
Tolerance
Code
Dimensions
Tolerance
D(Ø)
4
±0.3
P1
3.85
±0.7
F
64.8
-0, +2
H
16
±0.5
P2
6.35
±1.3
G
H1
9
+0.76, -0.5
T
0.9
Max.
H
=J
±1.2
H2
0
±2
W1
18
±0.5
J
=H
±1.2
L
11
Max.
W2
0
+0.6 Max.
K
0.8
Max.
L1
1.5
Max.
S
5
±0.7
N
5
±0.4
P
12.7
±0.3
R
3.2
Min.
No adhesive may be exposed
Capacitance Tolerance Code
50.8~53.3
Code
Tolerance
Remark
J
± 5.0 %
C0G
K
±10 %
X7R, C0G
M
± 20 %
Z5U, X7R
Z
+80, -20%
Z5U, Y5V
Rated Voltage Code
Code
250
500
101
Volt
DC 25V
DC 50V
DC 100V
Code
B
R
F
Packing
Bulk
Reel Pack
Flat Pack
How to Order(Product Identification)
Packing Code
CA 2633 Y5V 104 Z 500 F
Reliability and Test Conditions
Dimension Code
Type
Characteristic
CR : Radial Lead Type
The number shows the maximum length of "L" by 1/10 in millimeter, and the
CA : Axial Lead Type
alphabet means lead difference.(Refer to above diagram)
Temperature Coefficient Code
Temperature Characteristice
Temperature Range
Capacitance Change or
Temperature Coefficient
C0G
-55 to 125℃
0±30ppm/℃
X7R
-55 to 125℃
±15%
Z5U
10℃ to 85℃
+22, -56%
Y5V
-30 to 85℃
+22, -82%
Item
Temperature
Compensating Type
1.
Operating Temperature
Range
C0G : -55 to +125℃
2.
Insulation Resistance
More than 10,000MΩ or 500Ω.F(whichever is smaller)
Applied the rated voltage for
2 minute
3.
Dielectric Strength
No detects or abnormalities
- C0G : The rated voltage×300%
- X7R, Z5U, Y5V : 〃
×250%
4.
Capacitance
Within the specified tolerance
Temperature Compensating Type
5.
Dissipation Factor
30㎊ Min. :
Q≥1,000(DF≤0.1%)
Char. 50V Min.
25V
X7R
≤3%
30㎊ Max. :
Q≥400+20C
(DF≤1/(400+20C))
Z%V ≤4.0%
-
≤5%
(<220㎋)
Y5V ≤7%
(≥220㎋)
≤
7%
Capacitance Code(Pico Farads)
First two digits are significant ; third digit denotes number of zeros.
High Dielectric Constant Type
X7R : -55 to +125℃ Z5U : +10 to +85℃
Y5V : -30 to 85℃
≤2.5%
16V
10V
6.
www.samwha.com
SAMWHA CAPACITOR Co., Ltd.
Terminal Strength
Testing
Frequency
Testing
Voltage
C0G
(C≤1000pF)
1±0.1M㎐
0.5 to
5V rms
C0G
(C >1000pF)
1±0.1k㎐
1±0.2V rms
X7R, Z5U, Y5V
(C≤10㎌
10V Min.)
1±0.1k㎐
1±0.2V rms
Cap.
≤3.5% ≤5.0%
-
-
≤9%
(<220㎋)
≤12.5%
≤12.5%
(≥220㎋)
Ex.) 101 = 100㎊, 1R5 = 1.5㎊, 103 = 10,000㎊
26
Test Methods
and Conditions
No.
No evidence of damage to body of device of looseness
of terminals.
A static load of 10N(1kgf) :
applied to one terminal in the
axial direction and acting in a
direction away from the body for
1 to 5 secs.
Multi Layer Ceramic Capacitors
27
Radial & Axial
Multi Layer Ceramic Capacitors
Characteristic
Item
No.
7.
Resistance Appearance
to
Capacitance
Soldering
Change
Heat
Dissipation
Factor(or Q)
I.R.
8.
Temperature Appearance
Cycle
Capacitance
Change
Dissipation
Factor(or Q)
9.
Humidity
Load
Within ±2.5% or ±0.25pF X7R
: ≤± 7.5%
(whichever is larger) Z5U, Y5V : ≤± 20%
30㎊ Min. :
Q≥1,000 (DF≤0.1%)
Char. 50V Min.
25V
X7R ≤ 2.5%
≤3%
30㎊ Max. :
Q≥400+20C
(DF≤1/(400+20C))
Z5U
≤4.0%
16V
10V
≤3.5% ≤5.0%
-
-
- Immersion Time : 5±0.5sec
- Take it out and set it for 24±2
hours(temperature compensating
type)or 48±4hours(high dielectric
constant type) then measure.
No.
Item
10
Dissipation
High
Temperature Factor(or Q)
Load
No marking defects
Char. 50V Min.
25V
Step
X7R ≤ 2.5%
≤3%
30㎊ Max. :
Q≥400+20C
(DF≤1/(400+20C))
Z5U
≤4.0%
-
16V
10V
≤3.5% ≤5.0%
-
-
≤9%
≤5%
(<220㎋)
(<220㎋)
Y5V ≤7%
≤7% ≤12.5% ≤12.5%
(≥220㎋)
(≥220㎋)
No marking defects
Capacitance
Change
Within ±7.5% or±0.75㎊
(whichever is larger)
10㎊≤Cp≤30㎊:
Q≥275+5/2C
(DF≤1/(275+5/2C))
1
2
3
4
Capacitance Capacitance
Temperature Change
Characteristics
Min.
Max.
Temp. Operating Room Operating Room
(℃)
Temp. Temp. Temp. Temp.
+0, -3
+3, -0
Time
(min)
30±3
2 to 3
30±3
2 to 3
Char. 50V Min.
25V
16V
10V
X7R
≤5%
≤5%
≤5%
≤5%
Z5U
≤4.0%
-
-
-
Y5V
≤7.5%
≤10%
(<1㎌)
≤12.5% ≤15%
≤7%
(≥1㎌)
Char.
Temp.
Range
X7R
-55 to
+125℃
Z5U
-10 to
+85℃
Y5V
Reference
Temp.
-30 to
+85℃
Cap.
Change
Within
±15%
25℃
Within
+22%
-56%
Within
+22%
-82%
Take it out and set it for 24±2 hours
[tempeature compensating or 48±4
hours(high dielectric Type) at room
temperature, than measure.
Take it out and set it for 24±2 hours
(temperature compensatig) or 48±4
hours(high dielectric constant type)
at room temperature, then measure.
The charge/discharge current is less
than 50mA.
(1) Temperature Compensating Type :
The temperature coefficient is
determined using the capacitance
measured in step 3 as a reference.
When cycling the temperature
sequentially from step 1 through 5.
(SL: +25 to 85℃) the capacitance shall
be with in the specified tolerance for
the temperature coefficient.
The capacitance drift is calculated
dividing the difference between the
maximum measured values in the
step 1, 3 and 5 by Cap, value in step 3.
Step
Temperature
Coefficient
Char.
C0G
- Temperature : 40±2℃
Temp.
Range
Temperature
Coefficient
-55 to
±30ppm/℃
+125℃
- Humidity : 90~95%RH
X7R : Within ±12.5%
Z5U : Within ±30%
Y5V : Within + 30%, -40%
(Y5V/1.0μF, 2.2μF, 4.7μF/10V)
Within ±30% (others)
Test Methods
and Conditions
High Dielectric Constant Type
More than 1000MΩ or 50ΩF(Whichever is smaller)
I.R.
11
Within±2.5% or ±0.25pF X7R
: Within + 7.5%
Z5U, Y5V : Within ± 20%
30㎊ Min. :
Q≥350 (DF≤0.3%)
10㎊ Max. :
Q≥200+10C
(DF≤1/(200+10C))
More than 10,000MΩ or 500Ω.F (whichever & smaller)
30㎊ Min. :
Q≥1,000 (DF≤0.1%)
Temperature
Compensating Type
-
≤9%
≤5%
(<220㎋)
(<220㎋)
Y5V ≤7%
≤7% ≤12.5% ≤12.5%
(≥220㎋)
(≥220㎋)
Appearance
www.samwha.com
10. High
Appearance
Temperature
Capacitance
Load
change
Characteristic
- Soldering Temp : 260±5℃
No marked defect
More than 10,000MΩ or 500Ω.F (Whichever is smaller)
I.R.
Test Methods
and Conditions
High Dielectric Constant Type
I.R.
Dissipation
Factor(or Q)
28
Temperature
Compensating Type
Temperature(℃)
1
25±2
2
-55±3
3
25±2
4
125±3(for C0G)
5
25±2
- Hour : 500±12hrs
30㎊ Min. :
Q≥200 (DF≤0.5%)
Char. 50V Min.
25V
16V
10V
X7R
≤5%
≤5%
≤5%
≤5%
30㎊ Max. :
Q≥100+10/3C
(DF≤1/(100+10/3C))
Z5U
≤4.0%
-
-
-
Y5V
≤10%
(<1 ㎌)
≤7.5% ≤12.5% ≤12.5% ≤15%
(≥1 ㎌)
- Test Voltage : Tge rated voltage
- Take it out and set it for 24±2 hours
(temperature compensatig) or 48±4
hours(high dielectric constant type)
at room temperature, then measure.
The charge/discharge current is less
than 50mA.
(2) High Dielectric Constant Type :
The ranges of capacitance
change compared with the 25℃
value over the temperature
range shown in the table shall
be in the specified range.
12 The regulation of
environmental
pollution materials
※Never use materials mentioned below in leaded MLCC products regulated this document.
Pb, Cd, Hg, Cr+6, PBB(polybromida biphenyl), PBDE(polybrominated diphenyl ethers), asbestos.
13 The regulation about
destructive materials
of the ozone layer
Never use the ODS(ozone depleting substance) materials below in leaded MLCC products
regulated this document.
More than 500MΩ or 25Ω.F(whichever is smaller)
No marked defect
Within ±3% or±0.3㎊
(whichever is larger)
SAMWHA CAPACITOR Co., Ltd.
- Testing Time : 1000±12hrs
X7R : Within ±12.5% , Z5U : Within ±30%
Y5V : Within ±30%(Cap. < 1.0μF)
Within +30% , -40%(Cap. ≥ 1.0μF)
- Applied Voltage : Rated Voltage×200%
- Temperature :
C0G, X7R → 125±3℃
Z5U, Y5V → 85±3℃
Packing Quantity
Unit : pcs
Radial Type
Axial Type
Inner Box
Outer Box
Remark
Inner Box
Outer Box
Remark
2,500
15,000
Packing set on the basis of flat tapping
5,000
50,000
Packing set on the basis of flat tapping
Multi Layer Ceramic Capacitors
29
Multi Layer Ceramic Capacitors
Capacitance Range
Type
Char.
Cap(pF) Volt
C0G
50
100
Radial
X7R
50
100
Z5U
50
Y5V
16
50
C0G
50
Axial
X7R
Z5U
50
50
Y5V
50
1
2
3
4
5
6
7
8
9
10
12
15
Chip Beads & Inductors
16
18
20
22
24
27
Chip Ferrite Beads
32
Chip Ferrite Beads Arrays
51
Chip Ferrite Inductors
54
Chip Power Inductors
58
30
33
36
39
43
47
51
56
62
68
75
82
91
100
120
150
180
220
270
330
390
470
560
680
820
1.000
1.200
1.500
1.800
2.200
2.700
3.300
3.900
4.700
5.600
6.800
8.200
10.000
15.000
22.000
33.000
47.000
68.000
100.000
www.samwha.com
150.000
220.000
330.000
470.000
680.000
1.000.000
30
SAMWHA CAPACITOR Co., Ltd.
Similar pages