Vishay CS20604AX105G104ME Resistor/capacitor networks ecl terminators and line terminator, conformal coated, sip Datasheet

CS206
Vishay Dale
Resistor/Capacitor Networks
ECL Terminators and Line Terminator, Conformal Coated, SIP
FEATURES
•
•
•
•
•
4 to 18 pins available
Available
X7R and COG capacitors available
Low cross talk
e1
Custom design capability
“B” 0.250" [6.35 mm], “C” 0.350" [8.89 mm] and
“E” 0.325" [8.26 mm] maximum seated height available,
dependent on schematic
• 10K ECL terminators, Circuits E and M. 100K ECL
terminators, Circuit A. Line terminator, Circuit T
STANDARD ELECTRICAL SPECIFICATIONS
VISHAY
DALE
MODEL
PROFILE SCHEMATIC
CS206
B
CS206
CS206
C
E
RESISTOR CHARACTERISTICS
TEMP.
RESISTANCE RESISTANCE
TOLERANCE
COEFF.
RANGE
±%
± ppm/°C
Ω
POWER
RATING
P70°C W
E
M
T
A
0.125
10 - 1M
2, 5
200
100
0.01 µF
10 (K), 20 (M)
0.125
0.125
10 - 1M
10 - 1M
2, 5
2, 5
200
200
100
100
33 pF to 0.1 µF
0.01 µF
10 (K), 20 (M)
10 (K), 20 (M)
Capacitor Temperature Coefficient:
COG maximum 0.15 %, X7R maximum 2.5 %
Package Power Rating (maximum at 70 °C):
8 PINS = 0.80 W
9 PINS = 0.90 W
10 PINS = 1.00 W
EIA Characteristics:
COG and X7R (COG capacitors may be
substituted for X7R capacitors)
TECHNICAL SPECIFICATIONS
PARAMETER
Operating Voltage (at + 25 °C)
Dissipation Factor (maximum)
Insulation Resistance
(at + 25 °C/rated voltage)
Dielectric Test
Operating Temperature Range
CAPACITOR CHARACTERISTICS
CAPACITANCE
CAPACITANCE
TOLERANCE
RANGE
±%
T.C.R.
TRACKING
± ppm/°C
UNIT
VAC
%
CS206
50 maximum
C0G = 0.15; X7R = 2.5
MΩ
100 000
V
°C
2.5 x rated voltage
- 55 to + 125 °C
SCHEMATICS in inches [millimeters]
0.250" [6.35] High
("B" Profile)
0.250" [6.35] High
("B" Profile)
1
2
3 4
5
6
7 N
1
2
3
Circuit E
4
5
6
7
0.325" [8.26] High
("E" Profile)
N
1 2
3 4 5 6
Circuit M
7 8
0.350" [8.89] High
("C" Profile)
1
9 10
2
Circuit A
3
4
5
6
7
N
Circuit T
GLOBAL PART NUMBER INFORMATION
New Global Part Numbering: 20608EC103G471KP (preferred part numbering format)
2
GLOBAL
MODEL
0
PIN
COUNT
206 = CS206 04 = 4 Pin
08 = 8 Pin
18 = 18 Pin
6
0
8
E
C
1
0
3
G
4
7
1
K
CAP.
PACKAGE/
RESISTANCE
RES.
CAPACITANCE
CHARACTERISTIC
SCHEMATIC
VALUE
TOLERANCE
VALUE
TOLERANCE
E = BE
M = BM
A = EA
T = CT
S = Special
C = COG
X = X7R
S= Special
2 digit
significant
figure, followed
by a multiplier
100 = 10 Ω
333 = 33 kΩ
105 = 1 MΩ
G=±2%
(in pF)
J = ± 5 % 2 digit significant
S = Special figure, followed
by a multiplier
330 = 33 pF
392 = 3900 pF
104 = 0.1 µF
P
PACKAGING
SPECIAL
K = ± 10 % E = Lead (Pb)-free, Blank =
Bulk
Standard
M = ± 20 %
(Dash
S = Special
P = Tin/Lead,
Number)
Bulk
(up to 2
digits)
Historical Part Number example: CS20608BEC103G471KP03 (will continue to be accepted)
CS206
08
B
E
C
HISTORICAL
PIN
PACKAGE
SCHEMATIC CHARACTERISTIC
MODEL
COUNT HEIGHT
www.vishay.com
1
103
G
471
K
P03
RESISTANCE RESISTANCE CAPACITANCE CAPACITANCE
PACKAGING
VALUE
TOLERANCE
VALUE
TOLERANCE
For technical questions, contact: [email protected]
Document Number: 31519
Revision: 07-Aug-08
CS206
Resistor/Capacitor Networks
ECL Terminators and Line Terminator, Conformal Coated, SIP
Vishay Dale
DIMENSIONS in inches [millimeters]
0.085 [2.160] Typ.
L
Max.
0.050 [1.27] Typ.
0.135 [3.43] Max.
H
Max.
CL
Seating Plane
for 0.040 [1.016] Ø Hole
0.010
[0.254]
0.020
[0.508]
0. 007 [0.178]
0.100 ± 0.005 [2.54 ± 0.127]
Non-Cumulative
at Point of Egress
Ref.
0.135 + 0.015 - 0.010
[3.43 + 0.381 - 0.254]
0.050 [1.27]
H (Height) Maximum:
B = 0.250" [6.35] (Circuit E and M)
C = 0.350" [8.89] (Circuit T)
E = 0.325" [8.26] (Circuit A)
Pin #1 is extreme left-hand terminal on side with marking.
NUMBER
OF PINS
L
MAXIMUM
NUMBER
OF PINS
L
MAXIMUM
NUMBER
OF PINS
L
MAXIMUM
NUMBER
OF PINS
L
MAXIMUM
NUMBER
OF PINS
L
MAXIMUM
4 pin
0.400 [10.16]
7 pin
0.700 [17.78]
10 pin
1.000 [25.40]
13 pin
1.300 [33.02]
16 pin
1.600 [40.64]
5 pin
0.500 [12.70]
8 pin
0.800 [20.32]
11 pin
1.100 [27.94]
14 pin
1.400 [35.56]
17 pin
1.700 [43.18]
6 pin
0.600 [15.24]
9 pin
0.900 [22.86]
12 pin
1.200 [30.48]
15 pin
1.500 [38.10]
18 pin
1.800 [45.72]
TECHNICAL SPECIFICATIONS
Power Dissipation %
150
100
Flammability:
UL 94V-0
Lead Material:
Phosphorus-bronze, solder plated
Body Material:
50
Per MIL-STD-202, Method 208E
Part Marking:
Pin #1 identification, part number
(abbreviated as space allows),
DALE® or D, date code
0
0
25
50
Derating
75
70
100
125
150
Ambient Temperature °C
Epoxy coated
Solderability:
Moisture
Resistance:
Meets requirements of MIL-STD-202,
Method 106
PERFORMANCE
TEST
CONDITION
MAX. ΔR
(Typical Test Lots)
Thermal Shock
Subject to 5 cycles from - 65 °C to + 125 °C
± 0.5 % ΔR
Short Time Overload
2.5 x rated working voltage for 5 s at + 25 °C
± 0.25 % ΔR
Moisture Resistance
Cycle from + 25 °C to + 65 °C to + 25 °C over 8 h at 90 - 98 % relative humidity,
with 10 % of rated power applied, for 20 cycles. Stop cycling after an even number
of cycles and stabilize networks at high humidity for 1 to 4 h. Condition networks at
- 10 °C for 3 h, then return to temperature cycling. On completion of cycling
condition networks at + 25 °C at 50 % r.h. for 22 to 24 h
± 0.5 % ΔR
Immerse pins in melted solder to the lead standoffs at + 350 °C for 3 s max.
± 0.25 % ΔR
18 shocks of 100 G and 6 ms
± 0.25 % ΔR
Vibration
12 cycles varied logarithmically from 10 Hz to 2000 Hz to 10 Hz over 20 min
± 0.25 % ΔR
Load Life
1000 h at + 70 °C, rated power applied 1.5 h “ON”, 0.5 h “OFF”
± 1.0 % ΔR
Immerse and scrub samples with isopropyl alcohol, trichlorethylene and Freon
TMC
Marking remains legible
Resistance to Soldering Heat
Mechanical Shock
Resistance to Solvents
Solderability
Immerse leads in 60/40 tin-lead solder using R flux at + 245 °C for 5 s maximum
Terminal Strength
Withstand 2.2 kg pull 1 min
Case Insulation Resistance
Document Number: 31519
Revision: 07-Aug-08
100 V applied between case and terminals tied together
For technical questions, contact: [email protected]
Minimum 95 % solder
coverage
± 0.25 % ΔR
IR = 10 000 MΩ
minimum
www.vishay.com
2
Legal Disclaimer Notice
Vishay
Disclaimer
All product specifications and data are subject to change without notice.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf
(collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein
or in any other disclosure relating to any product.
Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any
information provided herein to the maximum extent permitted by law. The product specifications do not expand or
otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed
therein, which apply to these products.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this
document or by any conduct of Vishay.
The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless
otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such
applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting
from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding
products designed for such applications.
Product names and markings noted herein may be trademarks of their respective owners.
Document Number: 91000
Revision: 18-Jul-08
www.vishay.com
1
Similar pages