Cirrus CS3003-FSZ Precision low-voltage amplifier Datasheet

CS3003
Precision Low-voltage Amplifier
Features & Description

Description
Low Offset:
The CS3003 single amplifier is designed for precision
amplification of low-level signals. This amplifier achieves
excellent offset stability, high open loop gain, and low
noise. The devices also exhibit excellent CMRR and
PSRR. The common mode input range includes the supply rails. The amplifier operates with any supply voltage
from 2.7 V to 5 V (±1.35 V to ±2.50 V).
– 10 μV Max.

Low Drift:
– 0.05 μV/°C Max.

Low Noise:
– 17 nV/√Hz

Open-loop Voltage Gain:
– 150 dB Typ.
Rail-to-Rail Inputs
 Rail-to-Rail Output Swing
Pin Configuration

CS3003
– to within 10 mV of supply voltage


(Top View)
1.0 mA Supply Current
Slew rate:
1
NC
1
-IN
2
+IN
3
V-
4
– 0.25 V/μs
Applications




Thermocouple/Thermopile Amplifiers
Load Cell and Bridge Transducer Amplifiers
Precision Instrumentation
Battery-powered Systems
1
8
NC
-
7
V+
+
6
Output
5
NC
1
8-Lead SOIC
1. Must not be connected.
1000
200
150
100
100
50
0
-50
10
-100
-150
1
0.01
0.1
1
10
-200
0
1
Frequency (Hz)
3
4
5
6
7
8
9
10
Time (sec)
Noise vs. Frequency (Measured)
Cirrus Logic, Inc.
http://www.cirrus.com
2
0.01 Hz to 10 Hz Noise Performance
Copyright  Cirrus Logic, Inc. 2009
(All Rights Reserved)
OCT ‘09
DS735F3
CS3003
TABLE OF CONTENTS
1. CHARACTERISTICS AND SPECIFICATIONS ............................................. 3
1.1 5 V Electrical Characteristics ................................................................... 3
1.2 3 V Electrical Characteristics ................................................................... 4
1.3 Absolute Maximum Ratings ..................................................................... 5
2. TYPICAL PERFORMANCE PLOTS .............................................................. 5
3. PACKAGE DRAWINGS ................................................................................. 7
4. ORDERING INFORMATION .......................................................................... 8
5. ENVIRONMENTAL, MANUFACTURING, & HANDLING INFORMATION ... 8
6. REVISION HISTORY .................................................................................... 9
LIST OF FIGURES
Figure 1.
Figure 2.
Figure 3.
Figure 4.
Figure 5.
Figure 6.
Figure 7.
Figure 8.
2
Noise vs Frequency (Measured) .................................................................................5
0.01 Hz to 10 Hz Noise ...............................................................................................5
Gain & Phase vs. Frequency (2.7 V) ...........................................................................5
Gain & Phase vs. Frequency (5 V) ..............................................................................5
Supply Current vs. Supply Voltage ..............................................................................5
Supply Current vs. Temperature .................................................................................5
Voltage Swing vs. Output Current (2.7 V) ...................................................................6
Voltage Swing vs. Output Current (5 V) ......................................................................6
DS735F3
CS3003
1. CHARACTERISTICS AND SPECIFICATIONS
1.1
5 V Electrical Characteristics
V+ = +5 V, ±5%; V- = 0V; VCM = 2.5 V; Unless otherwise noted, TA = 25º C (See Note 1).
Parameter
Min
Typ
Max
Unit
Input Offset Voltage
(Note 2)
•
-
±2
±10
µV
Average Input Offset Drift
(Note 2)
•
-
±0.01
±0.05
µV/ºC
•
-
±170
-
±250
±1.5
pA
nA
•
-
±340
-
±500
±3.0
pA
nA
RS = 100 Ω, f0 = 1 Hz
RS = 100 Ω, f0 = 1 kHz
-
17
17
-
nV/ Hz
nV/ Hz
0.1 to 10 Hz
-
350
-
nVp-p
f0 = 1 Hz
-
100
-
fA/ Hz
Input Bias Current
Input Offset Current
Input Noise Voltage Density
Input Noise Voltage
Input Noise Current Density
Input Noise Current
0.1 to 10 Hz
-
1.9
•
V-
-
V+
V
Common Mode Rejection Ratio (dc)
•
110
120
-
dB
Power Supply Rejection Ratio
•
110
130
-
dB
RL = 2 kΩ to V+/2
•
120
150
150
-
dB
dB
RL = 2 kΩ to V+/2
(Note 4) RL = 100 kΩ to V+/2
•
(V+ – 100)
(V+ – 10)
-
(V- + 100 )
(V- + 10)
mV
mV
0.25
-
V/µs
25
-
µs
Input Voltage Range
(Note 2)
Large Signal Voltage Gain
(Note 3)
Output Voltage Swing
Slew Rate
RL = 2 k, 100 pF
Overload Recovery Time
-
Supply Current
•
Chopping Frequency
Input Capacitance
Differential
Common Mode
pAp-p
-
1.0
1.3
mA
-
150
-
kHz
-
1.5
10
-
pF
pF
Notes: 1. Symbol “•” denotes specification applies over -40 to +125 ° C.
2. This parameter is guaranteed by design and/or laboratory characterization.
3. Guaranteed within the output limits of (V+ – 0.2 V) to (V- + 0.2 V).
4. Specifies the worst case drive voltage relative to the supply rail under stated load conditions.
DS735F3
3
CS3003
1.2
3 V Electrical Characteristics
V+ = +3 V, ±10%; V- = 0V; VCM = 1.5 V; Unless otherwise noted, TA = 25º C (See Note 5).
Min
Typ
Max
Unit
Input Offset Voltage
Parameter
(Note 6)
•
-
±2
±10
µV
Average Input Offset Drift
(Note 6)
•
-
±0.01
±0.05
µV/ºC
•
-
±110
-
±150
±1.0
pA
nA
•
-
±220
-
±300
±2.0
pA
nA
RS = 100 Ω, f0 = 1 Hz
RS = 100 Ω, f0 = 1 kHz
-
17
17
-
nV/ Hz
nV/ Hz
0.1 to 10 Hz
-
350
-
nVp-p
f0 = 1 Hz
-
100
-
fA/ Hz
0.1 to 10 Hz
-
1.9
Input Bias Current
Input Offset Current
Input Noise Voltage Density
Input Noise Voltage
Input Noise Current Density
Input Noise Current
Input Voltage Range
(Note 6)
pAp-p
•
V-
-
V+
V
Common Mode Rejection Ratio (DC)
•
110
120
-
dB
Power Supply Rejection Ratio
•
110
130
-
dB
RL = 2 kΩ to V+/2
•
120
160
150
-
dB
dB
RL = 2 kΩ to V+/2
(Note 8) RL = 100 kΩ to V+/2
•
(V+ – 100)
(V+ – 10)
-
(V- + 100 )
(V- + 10)
mV
mV
0.25
-
V/µs
-
25
-
µs
-
2.0
2.5
mA
-
150
-
kHz
-
1.5
10
-
pF
pF
Large Signal Voltage Gain
(Note 7)
Output Voltage Swing
Slew Rate
RL = 2 k, 100 pF
Overload Recovery Time
Supply Current
•
Chopping Frequency
Input Capacitance
Differential
Common Mode
Notes: 5. Symbol “•” denotes specification applies over -40 to +125 ° C.
6. This parameter is guaranteed by design and/or laboratory characterization.
7. Guaranteed within the output limits of (V+ – 0.2 V) to (V- + 0.2 V).
8. Specifies the worst case drive voltage relative to the supply rail under stated load conditions.
4
DS735F3
CS3003
1.3
Absolute Maximum Ratings
Supply Voltage
Parameter
Min
Typ
Max
Unit
[(V+) – (V-)]
2.7
-
5.5
V
(V-) – 0.3
-
(V+) + 0.3
V
-65
-
+150
ºC
Input Voltage
Storage Temperature Range
2. TYPICAL PERFORMANCE PLOTS
1000
200
150
100
100
50
0
-50
10
-100
-150
0.1
1
-200
10
0
Frequency (Hz)
1
1
10
100
1k
10k 100k 1M
Gain (dB)
Gain (dB)
270
225
180
135
90
45
0
-45
-90
-135
-180
10M
180
160
140
120
100
80
60
40
20
0
-20
0.001 0.01
6
7
8
9
10
0
0.1
1
10
100
1k
10k 100k 1M
-45
-90
-135
-180
10M
Frequency (Hz)
Figure 4. Gain & Phase vs. Frequency (5 V)
Figure 3. Gain & Phase vs. Frequency (2.7 V)
1.25
Supply Current (mA)
Supply Current (mA)
5
270
225
180
135
90
45
Frequency (Hz)
1.2
1.15
1.1
1.05
1
0.95
0.9
0.85
0.8
4
Figure 2. 0.01 Hz to 10 Hz Noise
Phase (Deg.)
0.1
3
Time (sec)
Figure 1. Noise vs Frequency (Measured)
180
160
140
120
100
80
60
40
20
0
-20
0.001 0.01
2
Phase (Deg.)
1
0.01
2.5
3
3.5
4
4.5
5
5.5
Supply Voltage (V)
Figure 5. Supply Current vs. Supply Voltage
DS735F3
6
5V
1.0
2.7V
0.75
0.5
-40
-15
10
35
60
85
110 125
Temperature (°C)
Figure 6. Supply Current vs. Temperature
5
CS3003
Typical Performance Plots (Cont.)
V+
V+
-50
-50
-100
-100
-150
-150
-200
-200
+200
+200
+150
+150
+100
+100
+50
+50
-40°C
+25°C
+25°C
-40°C
+125°C
V–
V–
0
1
2
3
4
Output Current (mA)
Figure 7. Voltage Swing vs. Output Current (2.7 V)
6
+125°C
5
0
1
2
3
4
5
Output Current (mA)
Figure 8. Voltage Swing vs. Output Current (5 V)
DS735F3
CS3003
3. PACKAGE DRAWINGS
8L SOIC (150 MIL BODY) PACKAGE DRAWING
E
H
1
b
c
D
SEATING
PLANE
∝
A
L
e
DIM
A
A1
B
C
D
E
e
H
L
∝
A1
MIN
0.053
0.004
0.013
0.007
0.189
0.150
0.040
0.228
0.016
0°
INCHES
MAX
0.069
0.010
0.020
0.010
0.197
0.157
0.060
0.244
0.050
8°
MILLIMETERS
MIN
MAX
1.35
1.75
0.10
0.25
0.33
0.51
0.19
0.25
4.80
5.00
3.80
4.00
1.02
1.52
5.80
6.20
0.40
1.27
0°
8°
JEDEC # : MS-012
DS735F3
7
CS3003
4. ORDERING INFORMATION
Part #
Temperature Range
Package Description
CS3003-FSZ
-40 °C to +125 °C
8-lead SOIC, Lead Free
5. ENVIRONMENTAL, MANUFACTURING, & HANDLING INFORMATION
Model Number
Peak Reflow Temp
MSL Rating*
Max Floor Life
CS3003-FSZ
260 °C
2
365 Days
* MSL (Moisture Sensitivity Level) as specified by IPC/JEDEC J-STD-020.
8
DS735F3
CS3003
6. REVISION HISTORY
Revision
Date
A0
JAN 2007
Initial Release.
A1
FEB 2007
Corrected diagram on p1.
F1
AUG 2007
Updated to “Final” per QPL process.
F2
JUL 2009
Removed lead-containing SOIC and QFN packages from ordering information.
F3
OCT 2009
Update max. supply current specification to 1.3 mA.
DS735F3
Changes
9
CS3003
Contacting Cirrus Logic Support
For all product questions and inquiries contact a Cirrus Logic Sales Representative.
To find one nearest you go to http://www.cirrus.com
IMPORTANT NOTICE
Cirrus Logic, Inc. and its subsidiaries ("Cirrus") believe that the information contained in this document is accurate and reliable. However, the information is subject
to change without notice and is provided "AS IS" without warranty of any kind (express or implied). Customers are advised to obtain the latest version of relevant
information to verify, before placing orders, that information being relied on is current and complete. All products are sold subject to the terms and conditions of sale
supplied at the time of order acknowledgment, including those pertaining to warranty, indemnification, and limitation of liability. No responsibility is assumed by Cirrus
for the use of this information, including use of this information as the basis for manufacture or sale of any items, or for infringement of patents or other rights of third
parties. This document is the property of Cirrus and by furnishing this information, Cirrus grants no license, express or implied under any patents, mask work rights,
copyrights, trademarks, trade secrets or other intellectual property rights. Cirrus owns the copyrights associated with the information contained herein and gives consent for copies to be made of the information only for use within your organization with respect to Cirrus integrated circuits or other products of Cirrus. This consent
does not extend to other copying such as copying for general distribution, advertising or promotional purposes, or for creating any work for resale.
CERTAIN APPLICATIONS USING SEMICONDUCTOR PRODUCTS MAY INVOLVE POTENTIAL RISKS OF DEATH, PERSONAL INJURY, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE ("CRITICAL APPLICATIONS"). CIRRUS PRODUCTS ARE NOT DESIGNED, AUTHORIZED OR WARRANTED FOR USE
IN PRODUCTS SURGICALLY IMPLANTED INTO THE BODY, AUTOMOTIVE SAFETY OR SECURITY DEVICES, LIFE SUPPORT PRODUCTS OR OTHER CRITICAL APPLICATIONS. INCLUSION OF CIRRUS PRODUCTS IN SUCH APPLICATIONS IS UNDERSTOOD TO BE FULLY AT THE CUSTOMER'S RISK AND
CIRRUS DISCLAIMS AND MAKES NO WARRANTY, EXPRESS, STATUTORY OR IMPLIED, INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY
AND FITNESS FOR PARTICULAR PURPOSE, WITH REGARD TO ANY CIRRUS PRODUCT THAT IS USED IN SUCH A MANNER. IF THE CUSTOMER OR
CUSTOMER'S CUSTOMER USES OR PERMITS THE USE OF CIRRUS PRODUCTS IN CRITICAL APPLICATIONS, CUSTOMER AGREES, BY SUCH USE, TO
FULLY INDEMNIFY CIRRUS, ITS OFFICERS, DIRECTORS, EMPLOYEES, DISTRIBUTORS AND OTHER AGENTS FROM ANY AND ALL LIABILITY, INCLUDING ATTORNEYS' FEES AND COSTS, THAT MAY RESULT FROM OR ARISE IN CONNECTION WITH THESE USES.
Cirrus Logic, Cirrus, and the Cirrus Logic logo designs are trademarks of Cirrus Logic, Inc. All other brand and product names in this document may be trademarks
or service marks of their respective owners.
10
DS735F3
Similar pages