STATEK CX-1 High shock miniature surface mount at quartz crystal Datasheet

CX1HGSM AT CRYSTAL
6 MHz to 250 MHz
High Shock Miniature Surface Mount AT Quartz Crystal
Fundamental Mode:
6 MHz - 250 MHz
DESCRIPTION
STATEK’s miniature CX1HGSM AT crystals in leadless
ceramic packages are designed for surface mounting on
printed circuit boards or hybrid substrates. These rugged
crystals are designed for applications requiring exceptional
shock and vibration survival.
XX
SXX
glass lid
FEATURES
ceramic lid
High shock and vibration resistance
Designed for surface mount applications using
infrared, vapor phase, or epoxy mount techniques
PACKAGE DIMENSIONS
Low profile hermetically sealed ceramic package
D
Available with glass or ceramic lid
Custom designs available
Full military testing available
A
TOP
BOTTOM
Designed and manufactured in the USA
E
D
APPLICATIONS
Industrial
E
B
Down-hole Data Recorder
C
Process Control
Environmental Control
Engine Control
Telemetry
TYPICAL
MAXIMUM
DIM
inches
mm
inches
mm
Ruggedized Instrumentation
A
0.315
8.00
0.330
8.38
Automotive Control
B
0.140
3.56
0.155
3.94
Military & Aerospace
C
-
-
Smart Munitions
D
0.045
1.14
0.055
1.40
E
0.060
1.52
0.070
1.78
Timing Devices (Fuzes)
see below
Surveillance Devices
Missile Telemetry
Ruggedized Communications
THICKNESS (DIM C) MAXIMUM
GLASS LID
Aviation Equipment
CERAMIC LID
inches
mm
inches
mm
SM1
0.065
1.65
0.070
1.78
SM2/SM4
0.067
1.70
0.072
1.83
SM3/SM5
0.070
1.78
0.075
1.90
IS O
STATEK CORPORATION 512 N. MAIN ST., ORANGE, CA 92868 714-639-7810 FAX: 714-997-1256 www.statek.com
YS
90
01
TEM
C ERT I F I C
AT
N
IO
S
10108 - Rev D
SPECIFICATIONS
TERMINATIONS
Specifications are typical at 25OC unless otherwise noted.
Specifications are subject to change without notice.
Fundamental Frequency
10 MHz 32 MHz 155.52 MHz
Designation
SM1
SM2
SM3
SM4
SM5
Motional Resistance R1 (Ω)
30
25
15
Motional Capacitance C1 (fF)
5.5
6.2
4.0
Quality Factor Q (k)
100
30
30
2.2
2.3
2.3
Shunt Capacitance C0 (pF)
Calibration Tolerance
1
+
_
Max Process Temperature
100 ppm, or tighter as required
20 pF for f ≤ 50 MHz
Load Capacitance2
260OC for 20 sec.
SUGGESTED LAND PATTERN
10 pF for f > 50 MHz
Drive Level
Termination
Gold Plated (Lead Free)
Solder Plated
Solder Dipped
Solder Plated (Lead Free)
Solder Dipped (Lead Free)
0.070 (1.78)
500 µW MAX for f ≤ 50 MHz
200 µW MAX for f > 50 MHz
Frequency-Temperature
Stability1,3
Aging, first year4
+
_
50 ppm to
+
_
10 ppm (Commercial)
+
_
100 ppm to
+
_
20 ppm (Industrial)
+
_
100 ppm to
+
_
30 ppm (Military)
0.160 (4.06)
10 ppm MAX
Shock, survival
0.270 (6.86)
inches (mm)
10,000 g, 0.2 ms, 1/2 sine
5
Vibration, survival
20 g, 10-2,000 Hz swept sine
Operating Temp. Range
-10 C to +70 C (Commercial)
-40OC to +85OC (Industrial)
-55OC to +125OC (Military)
Storage Temp. Range
-55OC to +125OC.
Max Process Temperature
260OC for 20 sec.
6
O
EQUIVALENT CIRCUIT
O
C0
1
1. Other tolerances available. Contact factory.
2. Unless specified otherwise.
3. Does not include calibration tolerance. The characteristics of the frequency stability over
temperature follow that of the AT thickness-shear mode.
4. 10 ppm MAX for frequencies below 40 MHz. For tighter tolerances and higher
frequencies contact factory.
5. Up to 100,000 g. Contact factory.
6. Per MIL-STD-202G, Method 204D, Condition E. Random vibration testing also available.
L1
C1
R1
2
R1 Motional Resistance L1 Motional Inductance
C1 Motional Capacitance C0 Shunt Capacitance
PACKAGING OPTIONS
• Tray Pack
• 16mm tape, 7” or 13” reels
Per EIA 481 (see Tape and Reel data sheet 10109)
HOW TO ORDER CX1HGSM AT CRYSTALS
CX1
S
“S” if special or
custom design.
Blank if Std.
HG
C
C = Ceramic Lid
Blank = Glass Lid
SM1
–
32.0M
Frequency
M = MHz
SM1 = Gold Plated (Lead Free)
SM2 = Solder Plated
SM3 = Solder Dipped
SM4 = Solder Plated (Lead Free)
SM5 = Solder Dipped (Lead Free)
,
100
/
100
/
Frequency
Stability over
Temp. Range
(in ppm)
Calibration
Tolerance
@ 25OC
(in ppm)
—
/
I
Operating Temp. Range:
C = -10OC to +70OC
I = -40OC to +85OC
M = -55OC to +125OC
S = Customer Specified
OR
—
—
200
Operating Temp. Range:
C = -10OC to +70OC
I = -40OC to +85OC
M = -55OC to +125OC
S = Customer Specified
10108 - Rev D
IS O
STATEK CORPORATION 512 N. MAIN ST., ORANGE, CA 92868 714-639-7810 FAX: 714-997-1256 www.statek.com
YS
90
01
TEM
C ERT I F I C
AT
N
IO
S
Total
Frequency
Tolerance
(in ppm)
I
Similar pages