Skyworks CX80502-33 Cx805-30 baseband processor for multiband gsm and gprs application Datasheet

PRODUCT SUMMARY
CX805-30 Baseband Processor
for Multiband GSM and GPRS Applications
Applications
Description
• GSM handsets and modules (850/900/1800/1900 MHz)
The Skyworks CX805-30 Baseband Processors (BPs) are highly
integrated, dual core processors optimized for use in Global
System for Mobile communications (GSM) and General Packet
Radio Service (GPRS) cellular handset applications. The CX805-30
is the baseband portion of the Skyworks GSM/GPRS System
Solution.
• GPRS handsets and modules (850/900/1800/1900 MHz)
• Bluetooth®-enabled wireless headset modules
Features
• 0.25µ CMOS process technology
• ARM7 TDMI core
• Skyworks DSP core with all memory on-chip
• GPRS class 10 and circuit-switched data (14.4 kbps) services
• Half-rate, full-rate, and enhanced full-rate speech coders
• Voice features such as voice recognition, conversation record,
and voice memo
• Hardware accelerator for GPRS encryption algorithms (GEA 1
and 2)
• Integrated Real-Time Clock (RTC)
• Interface to handset MMI peripherals such as keypad, liquid
crystal display (LCD), and annunciator
• Interfaces to Skyworks IA and PMIC devices
• Interface to Subscriber Identity Module (SIM)
• Addresses up to 16 MB of external memory (flash or SRAM)
• Application Interfaces:
— Serial/RS-232
— Infra-red Data Adapter (IrDA)
• Low power operation. 3 V I/Os and an on-chip supplied 2.5 V
core
• Eight Chip Select (CS) signals for external memory
• 16-bit data bus, 24-bit address bus
Skyworks offers this part as a lead (Pb)-free
“environmentally friendly” package that is RoHS
compliant (European Parliament for the Restriction of
Hazardous Substances).
Both the Digital Signal Processor (DSP) core and the ARM7
THUMB™ Reduced Instruction Set Computing (RISC) architecture
are well suited to meet the needs of low power, high performance
embedded systems such as cellular phones. The BP operates over
a range of 2.7 V to 3.3 V.
The baseband processing tasks are divided between the DSP and
ARM7 processor cores. The DSP core executes the physical layer
(layer 1) processing functions, and the ARM microcontroller core
executes the Layer 2 and Layer 3 protocol software and ManMachine Interface (MMI) functions. The two cores communicate
through a dedicated block of dual port memory. Each of the
functional blocks in the device can be individually powered down
to ensure minimum current consumption in the idle or standby
mode.
The CX805-30 family of devices is available in several package
options:
• 12 x 12 mm, 0.8 mm pitch, 160-pin FPBGA
— CX80501-31: supports up to Class 8 GPRS operation
— CX80502-33/-35: supports up to Class 10 GPRS operation
• 10 x 10 mm, 0.5 mm pitch, 180-pin FPBGA
— CX80501-32: supports up to Class 8 GPRS operation
— CX80502-34/-36: supports up to Class 10 GPRS operation
— CX80503-34: supports up to Class 10 GPRS operation and
features optimized ROM code
• Lead-free 10 x 10 mm, 0.5 mm pitch, 180-pin FPBGA
— CX80502-38: supports up to Class 10 GPRS operation
— CX80503-38: supports up to Class 10 GPRS operation and
features optimized ROM code
Figure 1 provides a block diagram of the CX805-30 device in a
typical application. Package dimensions are provided in Figure 2
for the 12 x 12 devices and Figure 3 for the 10 x 10 devices.
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com
103171D • Skyworks Proprietary and Confidential Information • Products and Product Information are Subject to Change Without Notice. • June 21, 2005
1
CX805-30 BASEBAND PROCESSOR PRODUCT SUMMARY
From Skyworks IA Device
Supply Pins
System Clock
SIM Interface
Skyworks Power
Management IC
System Address Bus
Skyworks Serial Bus
RTC Alarm
System Data Bus
Flash
SRAM
LCD
System Chip Selects
RTC Supply
Baseband
Processor
Backup
Battery
RTC 32 kHz Crystal
Debug Port
SDS Port
System
Connector
Handset
Battery
Keypad
Ringer
Backlight
Vibrating Alert
Flip Sense
Annunciator
Keypad
GPIO
DSP
Control
Port
IrDA Compatible
SDS Port
DSP
DSP
Receive Codec
Port
Port
IrDA Port
Skyworks
IA Device
Figure 1. Block Diagram of the CX805-30 in a Typical Application
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com
2
June 21, 2005 • Skyworks Proprietary and Confidential Information • Products and Product Information are Subject to Change Without Notice. • 103171D
CX805-30 BASEBAND PROCESSOR PRODUCT SUMMARY
12 x 12 FPBGA - 160 Balls/ 0.80 mm Ball Pitch
1.5 MAX
A1 Ball Pad Corner
0.3 ± 0.05
13
14
7
9
11
12
10
8
5
6
3
4
1
2
A
B
C
D
E
F
0.4
G
0.45 ± 0.05 TYP
H
J
0.8
K
L
Mold
M
N
P
Seating Plane
0.4
0.8
12.00 ± 0.10
NOTES:
1. All dimensions are in millimeters.
2. For die orientation, see appropriate bonding diagram.
3. FPBGA lands are solder mask defined.
4. Minimum solder ball pitch is 0.80 mm.
5. Dimensioning and tolerancing in accordance with ASME Y14.5M-1994
12.00 ± 0.10
Pin 1 Indicator
Figure 2. 160-pin FPBGA Package Dimensions
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com
103171D • Skyworks Proprietary and Confidential Information • Products and Product Information are Subject to Change Without Notice. • June 21, 2005
3
CX805-30 BASEBAND PROCESSOR PRODUCT SUMMARY
10 x 10 FPBGA - 180 Balls/ 0.50 mm Pitch
1.4 MAX
10.00 ± 0.10
Pin 1 Indicator
A1 Ball Pad Corner
0.25 ± 0.05
17 15 13 11 9 7 5
3 1
2
18 16 14 12 10 8 6 4
B
D
Ø0.3 ± 0.05 TYP
F
0.25
H
10.00±0.10
K
M
0.5
P
Mold
T
V
Seating Plane
0.25
NOTES:
1. All dimensions are in millimeter
2. For die orientation see appropriate bonding diagram
3. FPBGA Lands are solder mask defined
4. Minimum solder pitch is 0.50 mm
5. Dimensioning and tolerancing in accordance with ASME Y14.5 M - 1994
Figure 3. 180-pin FPBGA and Lead-free 180-pin Lead-free FPBGA Package Dimensions
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com
4
June 21, 2005 • Skyworks Proprietary and Confidential Information • Products and Product Information are Subject to Change Without Notice. • 103171D
0.5
A
C
E
G
J
L
N
R
U
CX805-30 BASEBAND PROCESSOR PRODUCT SUMMARY
Ordering Information
Model Name
Part Number
Device Configuration
Baseband Processor
CX80501-31
12 x 12 mm, 160-pin, 0.8 mm pad pitch, FPBGA, GPRS Class 8
CX80501-32
10 x 10 mm, 180-pin, 0.5 mm pad pitch, FPBGA, GPRS Class 8
CX80502-331
12 x 12 mm, 160-pin, 0.8 mm pad pitch, FPBGA, GPRS Class 10
CX80502-351
CX80502-342
10 x 10 mm, 180-pin, 0.5 mm pad pitch, FPBGA, GPRS Class 10
CX80502-362
CX80502-38
Lead-free 10 x 10 mm, 180-pin, 0.5 mm pad pitch, FPBGA, GPRS Class 10
CX80503-34
10 x 10 mm, 180-pin, 0.5 mm pad pitch, FPBGA, GPRS Class 10 with optimized ROM code
CX80503-38
Lead-free 10 x 10 mm, 180-pin, 0.5 mm pad pitch, FPBGA, GPRS Class 10 with optimized ROM code
1. The CX80502-33 and CX80502-35 are interchangeable devices.
2. The CX80502-34 and CX80502-36 are interchangeable devices.
Copyright © 2003, 2005, Skyworks Solutions, Inc. All Rights Reserved.
Information in this document is provided in connection with Skyworks Solutions, Inc. (“Skyworks”) products. These materials are provided by Skyworks as a service to its customers and may be used
for informational purposes only by the customer. Skyworks assumes no responsibility for errors or omissions in these materials. Skyworks may make changes to its documentation, products,
specifications and product descriptions at any time, without notice. Skyworks makes no commitment to update the information and shall have no responsibility whatsoever for conflicts,
incompatibilities, or other difficulties arising from future changes to its documentation, products, specifications and product descriptions.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by or under this document. Except as may be provided in Skyworks Terms and Conditions of Sale
for such products, Skyworks assumes no liability whatsoever in association with its documentation, products, specifications and product descriptions.
THESE MATERIALS ARE PROVIDED “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED OR OTHERWISE, RELATING TO SALE AND/OR USE OF SKYWORKS PRODUCTS INCLUDING
WARRANTIES RELATING TO FITNESS FOR A PARTICULAR PURPOSE, MERCHANTABILITY, PERFORMANCE, QUALITY OR NON-INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL
PROPERTY RIGHT. SKYWORKS FURTHER DOES NOT WARRANT THE ACCURACY OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN THESE MATERIALS.
SKYWORKS SHALL NOT BE LIABLE FOR ANY DAMAGES, INCLUDING SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION, LOST REVENUES OR LOST
PROFITS THAT MAY RESULT FROM THE USE OF THESE MATERIALS WHETHER OR NOT THE RECIPIENT OF MATERIALS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
Skyworks products are not intended for use in medical, lifesaving or life-sustaining applications. Skyworks customers using or selling Skyworks products for use in such applications do so at their own
risk and agree to fully indemnify Skyworks for any damages resulting from such improper use or sale.
The following are trademarks of Skyworks Solutions, Inc.: Skyworks®, the Skyworks logo, and Breakthrough Simplicity™. Product names or services listed in this publication are for identification
purposes only, and may be trademarks of Skyworks or other third parties. Third-party brands and names are the property of their respective owners. Additional information, posted at
www.skyworksinc.com, is incorporated by reference.
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com
103171D • Skyworks Proprietary and Confidential Information • Products and Product Information are Subject to Change Without Notice. • June 21, 2005
5
Similar pages