Sony CXA1553P Dolby b type noise reduction system Datasheet

CXA1550P, CXA1551M/P
CXA1552M/P, CXA1553M/P
Dolby B∗ type Noise Reduction System
Description
The CXA1550/CXA1551/CXA1552/CXA1553 are
bipolar ICs providing two separate Dolby B type
noise reduction processors. The series is
composed of seven devices having four Dolby levels
and two types of package for various applications.
These devices feature very few external
components, which is achieved by monolithic filter
circuits using integrated thin film capacitors with high
capacitance.
Features
• Pin replaceable with CXA1100 series
• Minimum number of external components
• NR ON/OFF/Double Speed, REC/PB switches
included
• Small package (16 pin SOP, 16 pin DIP)
• Low current consumption 5.6mA typ.
• Dual channel processors in one chip
• Double speed encode and decode functions are
provided.
CXA1551M/CXA1552M
CXA1553M
16 pin SOP (Plastic)
CXA1550P/CXA1551P
CXA1552P/CXA1553P
16 pin DIP (Plastic)
Absolute Maximum Ratings (Ta=25 °C)
• Supply voltage
VCC
23
• Operating temperature Topr
–40 to +85
• Storage temperature
Tstg –65 to +150
• Allowable power dissipation
PD
V
°C
°C
SOP16 (A1551M/A1552M/A1553M)
500 mW
DIP16 (A1550P/A1551P/A1552P/A1553P) 900 mW
∗ These ICs are available only to the licensees of
Dolby Laboratories Licensing Corporation from
whom licensing and applications information may
be obtained.
∗ “Dolby” and the double D symbols are trade marks
of Dolby Laboratories Licensing Corporation.
Sony reserves the right to change products and specifications without prior notice. This information does not convey any license by
any implication or otherwise under any patents or other right. Application circuits shown, if any, are typical examples illustrating the
operation of the devices. Sony cannot assume responsibility for any problems arising out of the use of these circuits.
—1—
E92315A79-TE
—2—
REC
IN 1
C1
1µ
REC
IN 2
REC IN
1
16
VCC
2
15
GND
ATT2
ATT2
C3
100µ
VCC
C4
1µ
PB IN
3
14
C5
1µ
PB IN 1
PB
IN 2
C2
1µ
4
C6
2.2µ
ATT1
ATT3
ATT3
ATT1
13
R1
18k
IREF
VCC/2
SC
SC
ON/OFF/×2
5
12
6
11
C7
2.2µ
LINE OUT
C8
2.2µ
LINE OUT
LINE
OUT 1
LINE
OUT 2
REC/PB
7
DET
DET
10
C10
0.1µ
TC 1
C9
0.1µ
TC 2
PB IN
C11
2.2µ
REC OUT
8
9
C12
2.2µ
REC OUT
REC
OUT 1
REC
OUT 2
REC IN
MODE SW
NR SW
Block Diagram
ATT : Attenuator
SC : Side Chain
DET : Detector
CXA1550P, CXA1551M/P, CXA1552M/P, CXA1553M/P
CXA1550P, CXA1551M/P, CXA1552M/P, CXA1553M/P
Pin Description and Equivalent Circuit
Pin
No.
Symbol
Z (in)
(Ta=25 °C, VCC=12 V, single supply, no signal)
VDC
(V)
Equivalent circuit
Description
VCC
1, 16 REC IN
40 k
6.0 V
1
16
Recording (encode) input pin
40k
VCC/2
GND
2
VCC
—
12.0 V
VCC power supply pin
VCC
3, 14 PB IN
40 k
6.0 V
3
14
Playback (decode) input pin
40k
VCC/2
GND
4
VCT
2k
6.0 V
VCC/2 output pin
VCC
50µA
5
NRSW
—
—
50µA
5
50k
NR control pin
H : Double speed
M : NR off
L : NR on
GND
VCC
200
6, 11 LINE OUT
—
6.0 V
6
11
Line (decode) output pin
200
GND
—3—
CXA1550P, CXA1551M/P, CXA1552M/P, CXA1553M/P
Pin
No.
Symbol
Z (in)
VDC
(V)
Equivalent circuit
Description
VCC
4.5µA
20k
7, 10 TC
—
0.3 V
7
10
Time constant connecting pin
600k
GND
VCC
300
8, 9
REC OUT
—
6.0 V
10k
8
Recording (encode) output pin
300
9
GND
VCC
50µA
12
MODE
—
—
50µA
12
50k
REC/PB (encode/decode)
control pin
H : PB
L : REC
GND
VCC
8k
13
IREF
—
1.2 V
1.2V
13
Active filter reference current
input pin
50µA
GND
15
GND
—
0V
GND pin
—4—
CXA1550P, CXA1551M/P, CXA1552M/P, CXA1553M/P
Electrical Characteristics
Ta=25 °C, Dolby Level: –10 dBm (=245 mVrms) at RECOUT, 0 dBm=775 mVrms, VCC=15 V (CXA1550),
VCC=12 V (CXA1551), VCC=9 V (CXA1552), VCC=6 V (CXA1553) unless otherwise specified
Test Conditions
Min.
Typ.
Max.
Unit
11.5
—
16.0
V
8.5
—
16.0
V
6.5
—
16.0
V
5.0
—
16.0
V
3.5
5.6
7.7
mA
3.5
5.5
7.7
mA
3.5
5.3
7.7
mA
CXA1553
3.5
5.1
7.7
mA
CXA1550
–1.0
0.0
1.0
dBm
–4.0
–3.0
–2.0
dBm
–7.0
–6.0
–5.0
dBm
–11.0
–10.0
–9.0
dBm
–32
–30
–28
dBm
Characteristics
Symbol
R/P
NR
f (Hz)
CXA1550
Operating
CXA1551
voltage
CXA1552
other
Signal
Vopr
—
—
—
handling
≥12 dB
CXA1553
CXA1550
Current
CXA1551
consumption
CXA1552
LINE OUT
CXA1551
level
CXA1552
ICC
Vlout
REC
REC
OFF
OFF
—
No signal
1k
CXA1553
REC IN Level
Vrin
REC
OFF
1k
Vpin
REC
OFF
1k
–32
–30
–28
dBm
(1)
B-R-1
REC
ON
500
–25 dB
1.4
2.9
4.4
dB
Encode
(2)
B-R-2
REC
ON
2k
–25 dB
5.5
7.0
8.5
dB
characteristics
(3)
B-R-3
REC
ON
5k
–25 dB
3.9
5.4
6.9
dB
(Boost)
(4)
B-R-4
REC
ON
10 k
–40 dB
9.7
10.4
11.9
dB
(5)
B-R-5
REC
ON
10 k
0 dB
–1.1
0.4
1.9
dB
CXA1550
13.5
15.3
—
dB
Signal
CXA1551
14.0
15.9
—
dB
handling
CXA1552
15.9
—
dB
15.0
—
dB
CXA1550
—
0.03
0.2
%
—
0.04
0.2
%
CXA1550
CXA1551
THD
CXA1552
(OFF)
OFF
CXA1553
CXA1551
THD
CXA1552
(ON)
ON
CXA1553
SN
(CCIR)
R
ON
—
Rg=5 kΩ
(CCIR/ARM)
—
0.05
0.2
%
—
0.06
0.2
%
—
0.03
0.3
%
—
0.04
0.3
%
—
0.06
0.3
%
—
0.09
0.3
%
65
69
—
dB
REC-PB
CT-1
—
–82
–65
dB
PB-REC
CT-2
—
–81
–60
dB
REC ch to ch
CT-3
—
–70
–60
dB
PB ch to ch
CT-4
—
–70
–60
dB
Voff
–40
—
40
mV
(NR ON-OFF)
voltage
THD=1 %
13.0
REC OUT offset voltage
Control
1k
14.0
Encode S/N ratio
Crosstalk
OFF
CXA1553
harmonic
distortion
REC
(1) NR OFF
Total
Vomax
(2) NR ON
PB IN Level
REC
VC-R
0
—
0.5
V
PB
VC-P
2.5
—
VCC
V
ON
VC-ON
0
—
0.5
V
OFF
VC-OFF
2.5
—
VCC–2.5
V
×2
VC-×2
VCC–05
—
VCC
V
∗ 0 dB means the level which provides the Dolby level at the recording output in the noise reduction off mode.
—5—
15V
VCC
A
C4
1µ
R4
5.1k
C3
100µ
S1
R1
5.1k
R3
510
3
C1
1µ
2
1
C6
2.2µ
R6
1.5k
4
S3
R9
9.1k
5
R11
1.5k
6
C7
4.7µ
R13
510
7
C9
0.1µ
REC IN 1
CXA1550P
9
10
11
12
13
C10
0.1µ
14
RB
18k
C8
4.7µ
15
C5
1µ
R5
5.1k
R12
510
16
C2
1µ
S2
S4
R10
1.5k
GND
VCC/2
Audio
SG
R2
5.1k
R7
11k
PB IN 1
TC 2
15V
IREF
REC IN 2
MODE SW
NR SW
—6—
VCC
LINE OUT 1
PB IN 2
TC 1
LINE OUT 2
REC OUT 1
8
REC OUT 2
Test Circuit
C11
4.7µ
C12
4.7µ
S5
S6
S7
S8
R14
10k
S9
Distortion
Analyzer
AC Level
Meter
CCIR/ARM
Filter
DC Level
Meter
CXA1550P, CXA1551M/P, CXA1552M/P, CXA1553M/P
CXA1550P, CXA1551M/P, CXA1552M/P, CXA1553M/P
Switchable Processor with Single Supply
C3
10µ
REC/PB
REC
PB
PB IN
(–30dBm)
REC IN
(–30dBm)
C12/1µ
C11
1µ
C14
2.2µ
R2
10k
LINE OUT
C15
C13 (10%)2.2µ
0.1µ
R1
(2%)
18k
∗
RT
16
15
14
13
12
11
10
9
1
2
3
4
5
6
7
8
REC OUT
(–10dBm)
VCC
∗
RT
REC IN
(–30dBm)
∗
C1
22µ
C2
100µ
C25
2.2µ
C23 (10%)
0.1µ
REC OUT
(–10dBm)
LINE OUT
C21/1µ
PB IN
(–30dBm)
C24
2.2µ
NR SW
C22/1µ
×2 OFF ON
Note) 1. Resistor and capacitor tolerances are ±10 % and ±20 % respectively unless otherwise specified.
2. When resistors RT are connected to Pin 4 for the MPX filter termination, increase the capacitances
of C1 and C11 (C21) to 470 µF and 4.7 µF respectively.
Switching Processor with Split Power Supply
REC/PB
PB
REC
PB IN
(–30dBm)
REC IN
(–30dBm)
VEE
C1
100µ
C2
100µ
VCC
REC IN
(–30dBm)
PB IN
(–30dBm)
R2
10k
C12
1µ
C3
100µ
C11
1µ
R1
(2%)
18k
C14
2.2µ
LINE OUT
C13 (10%)
0.1µ
16
15
14
13
12
11
10
9
1
2
3
4
5
6
7
8
C21
1µ
C22
1µ
C15
2.2µ
C25
2.2µ
C23 (10%)
0.1µ
NR SW
×2
ON
REC OUT
(–10dBm)
REC OUT
(–10dBm)
LINE OUT
C24
2.2µ
OFF
Note) Resistor and capacitor tolerances are ±10 % and ±20 % respectively unless otherwise specified.
—7—
CXA1550P, CXA1551M/P, CXA1552M/P, CXA1553M/P
Playback Processor with AUX input
TAPE IN
(–30dBm)
AUX IN
(–30dBm)
TAPE/AUX
AUX
∗ R2
TAPE ∗
10k
C12
1µ
C14
2.2µ
∗
C3
10µ
LINE OUT
R1
(2%)
18k
C13 (10%)
0.1µ
∗ C11
1µ
16
15
14
13
12
11
10
9
1
2
3
4
5
6
7
8
VCC
AUX IN
(–30dBm)
TAPE IN
(–30dBm)
C21
1µ
C2
100µ
C13 (10%)
0.1µ
C24
2.2µ
C1
22µ
LINE OUT
NR SW
C22
∗ 1µ
×2 OFF ON
Note) 1. Resistor and capacitor tolerances are ±10 % and ±20 % respectively unless otherwise specified.
2. When the AUX input is unnecessary, remove R2, C3, C11, C21 and TAPE/AUX control switch and
connect Pin 12 to VCC.
Application circuits shown are typical examples illustrating the operation of the devices. Sony cannot assume responsibility for
any problems arising out of the use of these circuits or for any infringement of third party patent and other right due to same.
—8—
CXA1550P, CXA1551M/P, CXA1552M/P, CXA1553M/P
Notes on Applications
1) Power supply
The CXA1550 series is designed to operate on either single or split power supply. The ripple rejection
performance is excellent for either supply. VCT (Pin 4) is a reference voltage of the VCC/2 buffer amplifier.
With single power supply operation, internally generated VCC/2 voltage appears at the pin, and a bypass
capacitor has to be connected between the pin and ground. On split power supply operation, the VCT (Pin
4) pin has to be connected to ground, and VEE (negative power supply) is supplied to the GND (Pin 15) pin.
2) Double speed (×2)
The CXA1550 series provides double speed encode/decode modes, which offer high speed dubbing
function. On double speed mode, the frequency response shifts twice as the normal B type.
3) Operational mode control
The CXA1550 series provides fully electronic switching circuits. The functions are controlled by DC voltage
of the two control pins of REC/PB (Pin 12) and ON/OFF/×2 (Pin 5). The switching truth tables are shown in
Table 1.
Pin
Pin 12
Pin 5
Function
PB (Decode)
REC (Encode)
NR × 2
NR OFF
NR ON
Single Supply
VCC ≥ V ≥ 2.5 V
0.5 V ≥ V ≥ 0 V
VCC ≥ V ≥ VCC–0.5 V
VCC–2.5 ≥ V ≥ 2.5 V
0.5 V ≥ V ≥ 0 V
Split Supply
VCC ≥ V ≥ VEE+2.5 V
VEE+0.5 V ≥ V ≥ VEE
VCC ≥ V ≥ VCC–0.5 V
VCC–2.5 V ≥ V ≥ VEE+2.5 V
VEE+0.5 V ≥ V ≥ VEE
Table 1.
It is desirable to provide CR time constant circuits at the mode control pins with time constant from 100
msec to 1 sec, which will reduce switching clicks effectively.
4) Reference levels
Characteristics and specifications of the Dolby noise reduction processor are defined as the levels and
measured with reference to the Dolby level. This particular level in these devices is –10 dBm (245 mVrms),
and is measured at the recording output (REC OUT) in the NR off mode.
The reference levels of the recording input (REC IN), playback input (PB IN) and line output (LINE OUT)
are defined as the levels which provide the Dolby level at the recording output in the NR off mode.
The CXA1550 series has a common silicon die, and has different internal connection (AL pattern). The
series provides four different line output levels for various applications. Other reference levels, recording
input level, playback input level and recording output level (=Dolby level) are identical in all devices.
The reference levels are as follows
Recording output level (=Dolby level)
Recording input level
Playback input level
Line output level
CXA1550
CXA1551
CXA1552
CXA1553
–10 dBm
–30 dBm
–30 dBm
0 dBm
–3 dBm
–6 dBm
–10 dBm
—9—
(245 mVrms)
(24.5 mVrms)
(24.5 mVrms)
(775 mVrms)
(548 mVrms)
(388 mVrms)
(245 mVrms)
CXA1550P, CXA1551M/P, CXA1552M/P, CXA1553M/P
5) MPX filter termination and C1 for VCC/2 (Pin 4)
The MPX (multiplex) filter termination method shown in Fig. 1 allows saving the coupling capacitors
between the buffer amplifiers and MPX filters. However, the channel to channel separation and REC to PB
crosstalk of low frequency signals will be degraded by the termination resistor RT. For example, 5 kΩ of R1
will degrade the channel to channel separation to 50 dB. Better separation can be obtained by increasing
the capacitance of C1 (Pin 4) to 220 µF or 470 µF.
The allowable minimum value of C1 is 47 µF, and 100 µF is the standard recommended value. Larger
values of C1 are generally desirable in order to improve the crosstalk and ripple rejection ratio.
6) Application for dubbing cassette decks
The CXA1550 series generates non decoded signal at the recoding output in the playback (decode) mode,
and can simplify the structure of dubbing decks. See the Sony’ Dolby B/C type IC (CX20187/CXA1097Q or
CX20188/CXA1098Q) data sheet in detail.
Line
Input
Buffer
MPX
Filter
C11
4.7µ
RT
16
15
14
13
CXA1550 Series
RT
Line
Input
Buffer
MPX
Filter
C21
4.7µ
1
2
3
4
C1
470µ
Fig. 1
—10—
CXA1550P, CXA1551M/P, CXA1552M/P, CXA1553M/P
Example of Representative Characteristics
Current consumption vs. Input level (CXA1552)
Encode Mode
6
7
ICC – Current consumption (mA)
ICC – Quiescent current consumption (mA)
Quiescent current consumption vs. Supply voltage
NR OFF
NR ON
NR × 2
5
Encode Mode
VCC=9V
0dB=Dolby level
NR ON 10kHz
6
NR OFF
NR × 2 10kHz
NR ON 1kHz
NR × 2 1kHz
5
4
5
10
15
–12
20
–8
–4
VCC – Supply Voltage (V)
VCC=9V
0dB=Dolby level
4
8
12
–50dB
VCC=9V
0dB=Dolby level
–50dB
10
10
8
–30dB
6
4
–20dB
2
–10dB
–40dB
Encode boost (dB)
–40dB
Encode boost (dB)
12
Double speed encode boost
NR ON encode characteristics
12
0
Input level (dB)
0
8
–30dB
6
4
–20dB
2
–10dB
0
0dB
0dB
20
500
1k
2k
5k
10k
20k
A1551
10k
20k
14
12
LINE OUT
8
REC OUT
6
4
2
10
0
0
–2
10 12 14 16 18
50k
10
16
8
5k
Load characteristics (CXA1552)
A1550
6
2k
Signal handling
Encode Mode A1553 A1552
NR OFF
f=1kHz
THD=1%
4
1k
Frequency (Hz)
18
Signal handling (dB)
500
Frequency (Hz)
Maximum output level (dB)
200
Encode Mode
VCC=9V
THD=1%
0dB=0.775Vrms
200
20 22
VCC – Supply voltage (V)
500
1k
2k
5k
RL – Load resistance (Ω)
—11—
10k
20k
CXA1550P, CXA1551M/P, CXA1552M/P, CXA1553M/P
NR OFF total harmonic distortion –1 (CXA1551)
Encode Mode
VCC=12V
0dB=Dolby level
Total harmonic distortion (%)
0.5
0.2
0.1
0.05
f=10kHz
0.02
f=100Hz
f=1kHz
0.01
–8
–4
0
4
0.5
0.2
0.1
f=100Hz
0.05
f=10kHz
f=1kHz
0.02
0.01
8
12
16
–8
–4
0
4
8
12
16
Output level (dB)
Double speed total harmonic distortion –1 (CXA1551)
NR OFF total harmonic distortion –2 (CXA1550)
Encode Mode
VCC=12V
0dB=Dolby level
1.0
0.5
0.2
0.1
f=10kHz
f=100Hz
0.05
f=1kHz
0.02
0.01
1.0
Encode Mode
0dB=Dolby level
f=1kHz
0.5
VCC=11.5V
0.2
0.1
VCC=15V
0.05
0.02
0.01
–8
–4
0
4
8
12
16
–8
–4
0
4
8
12
16
Output level (dB)
Output level (dB)
NR ON total harmonic distortion –2 (CXA1550)
Double speed total harmonic distortion –2 (CXA1550)
Encode Mode
0dB=Dolby level
f=1kHz
1.0
0.5
Total harmonic distortion (%)
Total harmonic distortion (%)
Encode Mode
VCC=12V
0dB=Dolby level
Output level (dB)
1.0
Total harmonic distortion (%)
1.0
Total harmonic distortion (%)
Total harmonic distortion (%)
1.0
NR ON total harmonic distortion –1 (CXA1551)
VCC=11.5V
0.2
0.1
0.05
VCC=15V
0.02
0.01
Encode Mode
0dB=Dolby level
f=1kHz
0.5
0.2
0.1
VCC=11.5V
0.05
VCC=15V
0.02
0.01
–8
–4
0
4
8
12
16
–8
Output level (dB)
–4
0
4
8
Output level (dB)
—12—
12
16
CXA1550P, CXA1551M/P, CXA1552M/P, CXA1553M/P
NR OFF total harmonic distortion –3 (CXA1551)
Encode Mode
0dB=Dolby level
f=1kHz
VCC=12V
Total harmonic distortion (%)
0.5
VCC=8.5V
0.2
0.1
0.05
0.02
0.01
–4
0
4
8
12
VCC=12V
0.5
VCC=8.5V
0.2
0.1
0.05
VCC=15V
0.02
16
–8
–4
0
4
8
12
16
Output level (dB)
Output level (dB)
Double speed total harmonic distortion –3 (CXA1551)
NR OFF total harmonic distortion –4 (CXA1552)
1.0
Encode Mode
0dB=Dolby level
f=1kHz
VCC=12V
1.0
0.5
VCC=8.5V
0.2
0.1
0.05
VCC=15V
0.02
0.01
1.0
Encode Mode
0dB=Dolby level
f=1kHz
VCC=9V
0.5
VCC=6.5V
0.2
0.1
0.05
0.02
0.01
–8
–4
0
4
8
12
16
VCC=15V
–4
0
4
8
12
16
20
Output level (dB)
Output level (dB)
NR ON total harmonic distortion –4 (CXA1552)
Double speed total harmonic distortion –4 (CXA1552)
VCC=9V
Encode Mode
0dB=Dolby level
f=1kHz
1.0
0.5
Total harmonic distortion (%)
Total harmonic distortion (%)
Encode Mode
0dB=Dolby level
f=1kHz
0.01
VCC=15V
–8
Total harmonic distortion (%)
1.0
Total harmonic distortion (%)
Total harmonic distortion (%)
1.0
NR ON total harmonic distortion –3 (CXA1551)
VCC=6.5V
0.2
0.1
0.05
VCC=15V
0.02
0.01
VCC=9V
Encode Mode
0dB=Dolby level
f=1kHz
0.5
VCC=6.5V
0.2
0.1
0.05
VCC=15V
0.02
0.01
–4
0
4
8
12
16
20
–4
Output level (dB)
0
4
8
12
Output level (dB)
—13—
16
20
CXA1550P, CXA1551M/P, CXA1552M/P, CXA1553M/P
NR OFF total harmonic distortion –5 (CXA1553)
VCC=5V
Encode Mode
0dB=Dolby level
f=1kHz
1.0
Total harmonic distortion (%)
Total harmonic distortion (%)
1.0
NR ON total harmonic distortion –5 (CXA1553)
0.5
VCC=5V
0.2
VCC=6V
0.1
0.05
0.02
VCC=6V
0.5
0.2
0.1
VCC=15V
0.05
0.02
Encode Mode
0dB=Dolby level
f=1kHz
VCC=15V
0.01
0.01
0
4
8
12
16
20
24
0
8
12
16
20
Output level (dB)
Double speed total harmonic distortion –5 (CXA1553)
Crosstalk (CXA1552)
1.0
–40
VCC=5V
0.5
24
VCC=9V
NR OFF
Refer to Dolby Level
–50
VCC=6V
Crosstalk (dB)
Total harmonic distortion (%)
4
Output level (dB)
0.2
0.1
0.05
–60
–70
–80
VCC=15V
0.02
–90
Encode Mode
0dB=Dolby level
f=1kHz
0.01
0
4
8
12
16
20
REC to PB
PB to REC
CH to CH
–100
24
500
Output level (dB)
1k
2k
5k
Frequency (Hz)
—14—
10k
20k
CXA1550P, CXA1551M/P, CXA1552M/P, CXA1553M/P
Package Outline
Unit : mm
CXA1551M, CXA1552M
CXA1553M
16PIN SOP (PLASTIC)
+ 0.4
1.85 – 0.15
+ 0.4
9.9 – 0.1
16
9
6.9
+ 0.2
0.1 – 0.05
8
+ 0.1
0.2 – 0.05
1.27
0.45 ± 0.1
0.5 ± 0.2
1
7.9 ± 0.4
+ 0.3
5.3 – 0.1
0.15
0.24 M
PACKAGE STRUCTURE
PACKAGE MATERIAL
SONY CODE
SOP-16P-L01
EIAJ CODE
SOP016-P-0300
EPOXY RESIN
LEAD TREATMENT
SOLDER PLATING
LEAD MATERIAL
COPPER ALLOY
PACKAGE MASS
0.2g
JEDEC CODE
—15—
CXA1550P, CXA1551M/P, CXA1552M/P, CXA1553M/P
Unit : mm
CXA1550P, CXA1551P
CXA1552P, CXA1553P
+ 0.3
6.4 – 0.1
+ 0.4
19.2 – 0.1
+ 0.1
0.05
0.25 –
16PIN DIP (PLASTIC)
16
7.62
9
1
0° to 15°
8
Two kinds of package surface:
1.All mat surface type.
2.All mirror surface type.
3.0 MIN
0.5 MIN
+ 0.4
3.7 – 0.1
2.54
0.5 ± 0.1
1.2 ± 0.15
PACKAGE STRUCTURE
PACKAGE MATERIAL
EPOXY RESIN
DIP-16P-01
LEAD TREATMENT
SOLDER PLATING
EIAJ CODE
DIP016-P-0300
LEAD MATERIAL
COPPER ALLOY
JEDEC CODE
Similar to MO-001-AE
PACKAGE MASS
1.0 g
SONY CODE
9
7.62
16
+ 0.3
6.4 – 0.1
+ 0.4
19.1 – 0.1
+ 0.1
0.05
0.25 –
16PIN DIP (PLASTIC) 300mil
0° to 15°
8
1
0.46 ± 0.1
3.0 MIN
0.5 MIN
2.54
+ 0.4
3.7 – 0.1
Package Outline
1.53 ± 0.15
PACKAGE STRUCTURE
PACKAGE MATERIAL
EPOXY RESIN
DIP-16P-03
LEAD TREATMENT
SOLDER PLATING
EIAJ CODE
∗DIP016-P-0300-B
LEAD MATERIAL
COPPER / 42 ALLOY
JEDEC CODE
Similar to MO-001-AE
PACKAGE WEIGHT
1.0g
SONY CODE
—16—
Similar pages