CLARE CYG2020 Cybergate Datasheet

CYG20XX
CybergateTM
Description
The CYG2000/2001/2010/2011/2020/2021/2030/2031
are Data Access Arrangement (DAA) modules featuring
a 350V, 120mA, 15Ω relay used for hookswitch, optocoupler with minimum CTR of 33% for ring detection, and a
low distortion transformer with 28.8kbps capabilities.
Features
• Low distortion transformer signal coupling
(0.01% max)
• Complete ring detector circuit
• Low power hookswitch
• Electronic inductor/gyrator circuit
• Surge protection
• Transient protection zeners
• Half- (20X0) or Full- (20X1) Wave Detection
• V.32 bis /V.34 compatible
• FCC Compatible
• Compatible with U.S. and Canadian dial up
phone lines
• Supports leased-line operation
• PC board mountable
Approvals
• UL recognized file #: E174201
Ordering Information
Part #
CYG2000
CYG2001
CYG2010
Applications
• Modems
• Fax machines
• Remote data acquisition
• Security systems
• Voice mail systems
• PC motherboard
• Computer telephony
• Process control
• Medical
• PBX
• Direct broadcast satellite
Description
DAA Module, Half Wave Ring Detection
DAA Module, Full Wave Ring Detection
DAA Module, Half Wave Ring Detection,
Loop Current Detection
DAA Module, Full Wave Ring Detection
Loop Current Detection
DAA Module, Half Wave Ring Detection,
CID
DAA Module, Full Wave Ring Detection,
CID
DAA Module, Half Wave Ring Detection,
CID and Loop Current Detection
DAA Module, Full Wave Ring Detection,
CID and Loop Current Detection
CYG2011
CYG2020
CYG2021
CYG2030
CYG2031
Block Diagrams
CYG2010/CYG2011
LINE 1
LINE 2
1
RING
2
R_LIM
VCC
18
470Ω GND 17
GYRATOR
VCC
LINE 1
GND
LINE 2
OH
RING
7
8
9
RING R_LIM
1
470Ω VCC
2
GYRATOR/
CALLER ID
HOOKSWITCH
LOOPI
VCC
VCC
VCC
47k
18
17
14
HOOKSWITCH
13
LOOP
CURRENT
R_LIM DETECT
2.2k
CYG2030/CYG2031
CYG2020/CYG2021
RING
SURGE
DETEC- PROTECTION
TION
11
10
RING
TIP
RING
OH
RING
RING
SURGE
DETEC- PROTECTION
TION
R_LIM
8
9
47k
VCC
RING
VCC
LINE 1
GND
LINE 2
11
RING
470Ω VCC
RING
OH
8
RING
9
17
13
LOOP
CURRENT
DETECT
7
18
14
HOOKSWITCH
CID2
TIP
R_LIM
GYRATOR/
CALLER ID
CID1
LOOPI
10
1
2
R_LIM
2.2k
VCC
47k
VCC
RING
SURGE
DETEC- PROTECTION
TION
RING
11
10
VCC
GND
CID1
CID2
TIP
RING
Handling and Assembly Recommendations
The CYG20XX products are not hermetically sealed and should not be exposed to any liquid-based rinsing processes. Clare recommends two (2) approaches. The
modem should either use a no clean soldering flux that would mostly evaporate during the normal wave soldering processes, or be soldered in by hand after the
rest of the card is wave soldered.
DS-CYG20XX-R1
www.clare.com
1
CYG20XX
Absolute Maximum Ratings (@ 25˚ C)
Parameter
Min
Isolation Voltage
Operational Temperature
Storage Temperature
Relative Humidity
(Non-Condensing)
Soldering Temperature
Tip/Ring (5, 6) Load
current (continuous)
Hookswitch LED
Drive Current
Hookswitch LED
Reverse Voltage
Ring Detect
Phototransistor Voltage VCC
Absolute Maximum Ratings are stress ratings. Stresses in
excess of these ratings can cause permanent damage to
the device. Functional operation of the device at these or
any other conditions beyond those indicated in the operational sections of this data sheet is not implied. Exposure
of the device to the absolute maximum ratings for an
extended period may degrade the device and effect its
reliability.
Typ Max Units
0
0
-
1000 VRMS
70
°C
70
°C
10
-
-
85
260
%
°C
-
-
120
mA
-
-
50
mA
-
-
5
V
-
-
20
V
Electrical Characteristics
Parameter
Conditions
Min
Typ
Max
Unit
@100VDC across pins
10,11 (R,T), per FCC 68.312
@100VDC across pins
10,11 (R,T), per FCC 68.312
@+5V, VCC
-
10
-
-
MΩ
-
-
10
µA
7
4.75
20
8
5.0
-
15
9
20
120
Ω
mA
V
mA
DC Electrical Characteristics
On-Hook Impedance
Off-Hook Line Leakage Current
Hookswitch Resistance
Off-Hook Supply Current
Hookswitch Power Source, Pin 8
DC Loop Current
AC Signal Path Electrical Characteristics
Return Loss
Insertion Loss
Transmit
Receive
Frequency Response
Longitudinal Balance
On-Hook
Off-Hook
DC Loop Current
Total Harmonic Distortion
Secondary Load Impedance
Primary Source Impedance
Ring Detection Circuit Characteristics
Ringing Voltage Detection Range
Ringing Frequency Detection Range
Ringer Equivalence Number
RING (Pin 9) Output Voltage (Pulsed)
Logic ‘0’, Ring present
Logic ‘1’, Ring not present
2
300-3500Hz
300-3500Hz
Test Circuit 1
Test Circuit 2
300-3500Hz
18
25
-
dB
-0.25
-
7
7
+0.25
dB
dB
dB
Per FCC 68.310
Per FCC 68.310
@600Hz and -10dBm
Line 1 and Line 2
Tip and Ring
60
40
20
-
294
600
120
0.01
-
dB
dB
mA
%
Ω
Ω
VCC @+5V
20
15
-
0.8B
150
70
-
Vrms
Hz
-
-
0.8
Vcc
V
V
www.clare.com
Rev. 1
CYG20XX
Electrical Characteristics (Continued)
Parameter
Surge, Transient, and
Isolation Characteristics
Surge Protection Voltage Tip and Ring
(Pins 11,10)
Transient Voltage Protection on
Line 1 and Line 2 (Pins 1,2)
Isolation Voltage
(Pins 1,2,7,8,9,17,18 to10,11,13,14)
Loop Detection Characteristics
(CYG2010/CYG2011/CYG2030/CYG2031)
Loop Current Detection Threshold
Conditions
Min
Typ
Max
Unit
-
-
-
300
V
-
-5
-
+5
V
Per FCC 68.302
-
-
1000
VRMS
Internal optocoupler with
2.2K Pull-up resistor
9
10
11
mA
Test Circuits
1. CYG20XX Transmit Insertion Loss
2. CYG20XX Receive Insertion Loss
+5V
+5V
VT
Rm
294Ω
LINE1
VCC
LINE2
GND
LOOP
OH
ILOOP
CID1
CID2
LINE1
LINE2
VCC
+VBATT
GND
ILOOP
CID1
10H
OH
TIP
TIP
600Ω
VLR
600Ω
RING
RING
RING
VLT
VT
AC
Source
10H
10H
Transmit Insertion Loss = GTR = 20 Log
10H
CID2
VLT
RING
VR
Rm
294Ω
+VBATT
Receive Insertion Loss = G RC = 20 Log
-VBATT
VR
V LR
-VBATT
CYG2020/2021/2030/2031
Caller ID Connections
Pins 13 & 14 should be connected to a 1-Form-A solid state relay (Clare LCA110), as follows:
VCC
1
µP Control
(Active Low)
6
4
Rev. 1
CID1
2
www.clare.com
CID2
3
CYG20XX
Package Pinouts
CYG2000/CYG2001
CYG2010/CYG2011
LINE 1
LINE 2
1
2
18
17
VCC
GND
LINE 1
LINE 2
1
2
18
17
VCC
GND
DO NOT USE
OH
RING
7
8
9
11
10
TIP
RING
LOOPI
OH
RING
7
8
9
11
10
TIP
RING
LINE 1
LINE 2
OH
RING
Top View
Top View
CYG2020/CYG2021
CYG2030/CYG2031
1
2
8
9
18
17
VCC
GND
14
13
CID1
CID2
11
10
TIP
RING
LINE 1
LINE 2
LOOPI
OH
RING
1
2
7
8
9
Top View
18
17
VCC
GND
14
13
CID1
CID2
11
10
TIP
RING
Top View
CYG20XX Pinouts & Definitions
4
PIN#
I/O
Name
Function
1
I/O
LINE1
Transformer isolated audio signal coupling path for the telephone line.
2
I/O
LINE2
Transformer isolated audio signal coupling path for the telephone line.
7
I
LOOPI
When system is off-hook (OH driven LOW) LOOPI is driven LOW continuously
on CYG2010/2011/2030/2031 devices.
N/C
Keying pin for CYG2000/CYG2001, do not use.
8
I
OH
Driving this pin LOW asserts the off-hook condition. The hookswitch LED is current limited by an internal 470Ω resistor.
9
O
RING
Active LOW indicates an incoming ring signal. This is pulsed LOW by the AC
ring signal at the ring frequency from 15-40Hz.
10
I/O
RING
Connection to telephone line Ring conductor.
11
I/O
TIP
13
O
CID2
Caller ID connection on CYG2020/2021/2030/2031. CID1/CID2 connect to an
external 1-Form-A solid state relay (CP Clare LCA110). When the SSR is closed
(connecting CID1 to CID2) Caller ID information is presented to LINE1/LINE2
after the first telephone ring burst.
14
O
CID1
Caller ID connection. See CID2 above.
17
I
GND
Connected to host system ground.
18
I
VCC
Provides power to the hookswitch LED. Typically +5V for ≈ 8mA LED current.
LED is current limited by an internal 470Ω resistor. VCC should not exceed 20V.
Connection to telephone line Tip conductor.
www.clare.com
Rev. 1
CYG20XX
Typical Application
CYG2000/CYG2001
+5V
294Ω
TX1
LINE 1
18 VCC
VCC
1
10
RING
HYBRID
CIRCUIT
TX2
LINE 2
2
HOOKSWITCH
VCC
RING
DETECT
NETWORK
RX
OH RELAY
GND
RING
OH
RING
8
9
TO TELEPHONE LINE
11
470Ω
TIP
17
56kΩ
Rev. 1
SURGE
PROTECTOR
GYRATOR
www.clare.com
VCC
GND
5
Worldwide Sales Offices
CLARE LOCATIONS
EUROPE
ASIA/PACIFIC
Clare Headquarters
78 Cherry Hill Drive
Beverly, MA 01915
Tel: 1-978-524-6700
Fax: 1-978-524-4900
Toll Free: 1-800-27-CLARE
European Headquarters
CP Clare nv
Bampslaan 17
B-3500 Hasselt (Belgium)
Tel: 32-11-300868
Fax: 32-11-300890
Clare Micronix Division
145 Columbia
Aliso Viejo, CA 92656-1490
Tel: 1-949-831-4622
Fax: 1-949-831-4628
France
Clare France Sales
Lead Rep
99 route de Versailles
91160 Champlan
France
Tel: 33 1 69 79 93 50
Fax: 33 1 69 79 93 59
Asian Headquarters
Clare
Room N1016, Chia-Hsin,
Bldg II,10F, No. 96, Sec. 2
Chung Shan North Road
Taipei, Taiwan R.O.C.
Tel: 886-2-2523-6368
Fax: 886-2-2523-6369
SALES OFFICES
AMERICAS
Americas Headquarters
Clare
78 Cherry Hill Drive
Beverly, MA 01915
Tel: 1-978-524-6700
Fax: 1-978-524-4900
Toll Free: 1-800-27-CLARE
Eastern Region
Clare
P.O. Box 856
Mahwah, NJ 07430
Tel: 1-201-236-0101
Fax: 1-201-236-8685
Toll Free: 1-800-27-CLARE
Central Region
Clare Canada Ltd.
3425 Harvester Road, Suite 202
Burlington, Ontario L7N 3N1
Tel: 1-905-333-9066
Fax: 1-905-333-1824
Western Region
Clare
1852 West 11th Street, #348
Tracy, CA 95376
Tel: 1-209-832-4367
Fax: 1-209-832-4732
Toll Free: 1-800-27-CLARE
Canada
Clare Canada Ltd.
3425 Harvester Road, Suite 202
Burlington, Ontario L7N 3N1
Tel: 1-905-333-9066
Fax: 1-905-333-1824
Germany
Clare Germany Sales
ActiveComp Electronic GmbH
Mitterstrasse 12
85077 Manching
Germany
Tel: 49 8459 3214 10
Fax: 49 8459 3214 29
Italy
C.L.A.R.E.s.a.s.
Via C. Colombo 10/A
I-20066 Melzo (Milano)
Tel: 39-02-95737160
Fax: 39-02-95738829
Sweden
Clare Sales
Comptronic AB
Box 167
S-16329 Spånga
Tel: 46-862-10370
Fax: 46-862-10371
United Kingdom
Clare UK Sales
Marco Polo House
Cook Way
Bindon Road
Taunton
UK-Somerset TA2 6BG
Tel: 44-1-823 352541
Fax: 44-1-823 352797
http://www.clare.com
Clare cannot assume responsibility for use of any circuitry other
than circuitry entirely embodied in this Clare product. No circuit
patent licenses nor indemnity are expressed or implied. Clare
reserves the right to change the specification and circuitry, without notice at any time. The products described in this document
are not intended for use in medical implantation or other direct life
support applications where malfunction may result in direct physical harm, injury or death to a person.
Specification: DS-CYG20XX-R1
©Copyright 2000, Clare, Inc.
CybergateTM is a trademark of Clare, Inc.
All rights reserved. Printed in USA.
1/12/01
Similar pages