Bulletin I2025 rev. C 10/02 150U(R).. SERIES STANDARD RECOVERY DIODES Stud Version Features Diffused diode Wide current range 150A High voltage ratings up to 1200V High surge current capabilities Stud cathode and stud anode version Hermetic metal case Typical Applications Welders Power supplies Machine tool controls High power drives Medium traction applications Battery charges Free-wheeling diodes Major Ratings and Characteristics Parameters 150U(R).. Units 150 A 125 °C 235 A @ 50Hz 3000 A @ 60Hz 3140 A @ 50Hz 45 KA2s @ 60Hz 41 KA2s 600 and 1200 V - 40 to 180 °C IF(AV) @ TC IF(RMS) IFSM 2 It V RRM range TJ www.irf.com case style DO205 (DO-8) 1 150U(R).. Series Bulletin I2025 rev. C 10/02 ELECTRICAL SPECIFICATIONS Voltage Ratings Voltage VRRM , maximum repetitive VRSM , maximum non- IRRM max. Code peak reverse voltage V repetitive peak rev. voltage V @ TJ = TJ max. 60 600 700 Type number 150U(R).. 80 800 900 100 1000 1100 120 1200 1300 mA 15 Forward Conduction Parameter I F(AV) 150U(R).. Units Conditions Max. average forward current 150 A @ Case temperature 125 °C I F(RMS) Max. RMS forward current 235 A Dc @ 110°C I FSM Max. peak, one-cycle forward, 3000 A t = 10ms non-repetitive surge current 3140 I 2t Maximum I2t for fusing 180° conduction, half sine wave KA2s 45 41 I 2 √t Maximum I2√t for fusing - KA2√s rf Slope resistance 0.97 mΩ V F(T0) Threshold voltage 0.80 V V FM Max. forward voltage drop 1.47 V No voltage t = 8.3ms reapplied t = 10ms No voltage t = 8.3ms reapplied Sinusoidal half wave, Initial TJ = TJ max. t = 0.1 to 10ms, no voltage reapplied @ TJ = TJ max. Ipk= 600A, TJ = 25°C, tp = 10ms sinusoidal wave Thermal and Mechanical Specifications Parameter 150U(R).. TJ Max. junction operating temperature range -40 to 180 Tstg Max. storage temperature range -40 to 180 Units Conditions °C RthJC Max. thermal resistance, junction to case 0.3 RthCS Max. thermal resistance, case to heatsink 0.1 T Max. allowed mounting torque +0 -20% 17 wt Approximate weight 130 Case style DO-205 (DO-8) K/W Nm 14.5 DC operation Mounting surface, smooth, flat and greased Not lubricated threads Lubricated threads g See Outline Table ∆RthJC Conduction (The following table shows the increment of thermal resistence R thJC when devices operate at different conduction angles than DC) 2 Conduction angle Sinusoidal conduction 180° 120° 90° 60° 30° 0.031 0.038 0.048 0.071 0.120 Rectangular conduction Units 0.023 0.040 0.053 0.075 0.121 Conditions TJ = TJ max. K/W www.irf.com 150U(R).. Series Bulletin I2025 rev. C 10/02 Ordering Information Table Device Code 150 U R 120 D L 1 2 3 4 5 6 1 - 150 = Standard xx0U device 2 3 - U R = Essential Part Number = Stud Reverse Polarity (Anode to Stud) 4 - Voltage code: Code x 10 = VRRM (See Voltage Ratings table) 5 6 - D L = Diffused diode = Stud base 1/2" - 20UNF-2A threads M = Metric base M12 x 1.75 None = Stud Normal Polarity (Cathode to Stud) None = Stud base 3/8" - 24UNF-2A threads Outline Table 150U(R) Series Conforms to JEDEC DO-205 (DO-8) All dimensions in millimeters (inches) * * FOR METRIC DEVICE M12 x 1.75 * FOR STUD BASE 1/2" - 20UNF-2A THREADS; refer "Odering Information Table" www.irf.com 3 150U(R).. Series 180 150U(R) RthJC (DC) = 0.3 K/W 160 Conduction Angle 140 120 180˚ 120˚ 60˚ 30˚ 100 90˚ 80 0 50 100 150 180 Maximum Allowable Case Temperature (°C) Maximum Allowable Case Temperature (°C) Bulletin I2025 rev. C 10/02 150U(R) RthJC (DC) = 0.3 K/W 160 Conduction Period 140 30˚ DC 60˚ 90˚ 120 120˚ 180˚ 100 80 200 0 40 80 120 160 200 Average Forward Current (A) Fig. 1 - Current Ratings Characteristics Fig. 2 - Current Ratings Characteristics Maximum Average Forward Power Loss (W) Average Forward Current (A) 300 180˚ 120˚ 90˚ 250 Rt hS A 60˚ 30˚ 200 150 =0 .0 5 0.2 K/ W K/ W 0.4 K/W 0.6 K/W RMS Limit 100 -D el ta R Conduction Angle 50 1.2 K /W 150U(R) Tj = 180˚C 0 0 50 100 150 80 200 Average Forward Current (A) 100 120 140 160 180 Maximum Allowable Ambient Temperature (°C) Maximum Average Forward Power Loss (W) Fig. 3 - Forward Power Loss Characteristics 300 180˚ 120˚ 250 RMS Limit 90˚ 60˚ 30˚ 200 Rt hS A DC 0.2 K/W 150 100 Conduction Period 50 =0 .05 K/ W 0.4 K/W 0.6 K/W 0.8 K /W -D elt aR 1.2 K/W 150U(R) Series Tj = 180˚C 0 0 50 100 150 200 250 Average Forward Current (A) 300 80 100 120 140 160 180 Maximum Allowable Ambient Temperature (°C) Fig. 4 - Forward Power Loss Characteristics 4 www.irf.com 150U(R).. Series 3500 Peak Half Sine Wave On-state Current (A) Peak Half Sine Wave Forward Current (A) Bulletin I2025 rev. C 10/02 At Any Rated Load Condition And With Rated Vrrm Applied Following Surge. Initial Tj = 180˚C @ 60 Hz 0.0083 s @ 50 Hz 0.0100 s 3000 2500 2000 1500 1000 Per Junction 500 1 10 100 4000 3500 3000 Maximum Non Repetitive Surge Current Versus Pulse Train Duration. Control Of Conduction May Not Be Maintained. Initial T j = 180˚C No Voltage Reapplied Rated V rrm Reapplied 2500 2000 1500 1000 Per Junction 500 0.01 1 Pulse Train Duration(s) Number Of Equal Amplitude Half Cycle Current Pulses (N) Fig. 5 - Maximum Non-Repetitive Surge Current Instantaneous Forward Current (A) 0.1 Fig. 6 - Maximum Non-Repetitive Surge Current 10000 1000 100 Tj = 25˚C Tj = 180˚C 10 0.5 1 1.5 2 2.5 3 Instantaneous Forward Voltage (V) Transient Thermal Impedance Z thJC (K/W) Fig. 7 - Forward Voltage Drop Characteristics 1 Steady State Value RthJC = 0.3 K/W (DC Operation) 0.1 150U(R) 0.01 0.001 0.01 0.1 1 10 Square Wave Pulse Duration (s) Fig. 8 - Thermal Impedance ZthJC Characteristic www.irf.com 5 150U(R).. Series Bulletin I2025 rev. C 10/02 Data and specifications subject to change without notice. This product has been designed and qualified for Industrial Level. Qualification Standards can be found on IR's Web site. IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105 TAC Fax: (310) 252-7309 Visit us at www.irf.com for sales contact information. 10/02 6 www.irf.com