Vishay D2TO035CR0100GRE3 Surface mount power resistor thick film technology Datasheet

D2TO35
www.vishay.com
Vishay Sfernice
Surface Mount Power Resistor
Thick Film Technology
FEATURES
• AEC-Q200 qualified
• 35 W at 25 °C case temperature
• Surface mounted resistor - TO-263 (D2PAK) style
package
• Wide resistance range from 0.01  to 550 k
• Non inductive
• Resistor isolated from metal tab
• Solder reflow secure at 270 °C/10 s
• Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
DIMENSIONS in millimeters
4.5
1.25
Footprint recommendation for
solderable contact area:
8.7
7.8 min.
1.25
10.5
11.00
1.6
1.50
8.8
8.1
4.02
6.50
8.00
15.4
10.1
5.15
0.2
7.6
2.49
4.00
5
2.8
2.2
2.40
1.6
0.26
5.08
0.3
2
Tolerance: ± 0.3 mm
Notes
• For the asssembly on board, we recommend the lead (Pb)-free thermal profile as per J-STD-020C
• Power dissipation is 3.3 W at an ambient temperature of 25 °C when mounted on a double sided copper board using FR4 standard, 70 μm
of copper, 39 mm x 30 mm x 1.6 mm
STANDARD ELECTRICAL SPECIFICATIONS
MODEL
SIZE
RESISTANCE
RANGE

D2TO35
TO-263
0.01 to 550K
RATED POWER LIMITING ELEMENT
TOLERANCE
P25 °C
VOLTAGE UL
±%
W
V
35
500
1, 2, 5, 10
TEMPERATURE
COEFFICIENT
± ppm/°C
CRITICAL
RESISTANCE

150, 250, 700, 1100
7.14K
MECHANICAL SPECIFICATIONS
TECHNICAL SPECIFICATIONS
Mechanical Protection
Power Rating and 
Thermal Resistance 
of the Component
Resistive Element
Substrate
Connections
Weight
Molded
Thick film
Alumina
Tinned copper
2.2 g max.
Temperature Coefficient
Standard
Dielectric Strength
IEC 60115-1
35 W at 25 °C (case
temperature)
RTH (j - c): 4.28 °C/W
See Special Feature table
± 150 ppm/°C
2000 VRMS - 1 min - 10 mA max.
(between terminals and board)
ENVIRONMENTAL SPECIFICATIONS
Insulation Resistance
106 M
Temperature Range
Inductance
 0.1 μH
- 55 °C to 175 °C
IEC 60695-11-5
Flammability
2 applications 30 s
separated by 60 s
DIMENSIONS
Standard Package
Revision: 22-Apr-13
TO-263 style
(D2PAK)
Document Number: 51058
1
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
D2TO35
www.vishay.com
Vishay Sfernice
SPECIAL FEATURES
Resistance Values
 0.010
 0.045
Tolerances
Requirement Temperature Coefficient (TCR)
(- 55 °C + 150 °C)
IEC 60115-1
 0.1
 0.5
± 250 ppm/°C
± 150 ppm/°C
± 1 % at ± 10 %
± 1100 ppm/°C
± 700 ppm/°C
PERFORMANCE
TESTS
Momentary Overload
Load Life
High Temperature Exposure
Temperature Cycling
Moisture Resistance
Biased Humidity
Operational Life
ESD Human Body Model
Vibration
Mechanical Shock
Board Flex
Terminal Strength
CONDITIONS
REQUIREMENTS
IEC 60115-1 §4.13
1.7 Pr 5 s for R < 2 
1.4 Pr 5 s for R  2 
US < 1.5 UL
IEC 60115-1
1000 h, 90/30 Pr at + 25 °C
AEC-Q200 REV C conditions:
MIL-STD-202 method 108
1000 h, + 175 °C, unpowered
Pre-conditioning 3 reflows according
JESTD020D
IEC 60068-2-14 test Na
1000 cycles, - 55 °C, + 175 °C
Dwell time - 15 min
AEC-Q200 REV C conditions:
MIL-STD-202 method 106
10 cycles, 24 h, unpowered
AEC-Q200 REV C conditions:
MIL-STD-202 method 103
1000 h, 85 °C, 85% RH
AEC-Q200 REV C conditions:
Pre-conditioning 3 reflows according
JESTD020D
MIL-STD-202 method 108
1000 h, 90/30, powered, + 125 °C
AEC-Q200 REV C conditions:
AEC-Q200-002
25 kVAD
AEC-Q200 REV C conditions:
MIL-STD-202 method 204
5 g’s for 20 min, 12 cycles
test from 10 Hz to 2000 Hz
AEC-Q200 REV C conditions:
MIL-STD-202 method 213
100 g’s, 6 ms, 3.75 m/s
3 shocks/direction
AEC-Q200 REV C conditions:
AEC-Q200-005
bending 2 mm, 60 s
AEC-Q200 REV C conditions:
AEC-Q200-006
1.8 kgf, 60 s
± (0.25 % + 0.005 )
± (1 % + 0.005 )
± (0.25 % + 0.005 )
± (0.5 % + 0.005 )
± (0.5 % + 0.005 )
± (1 % + 0.005 )
± (1 % + 0.005 )
± (0.5 % + 0.005 )
± (0.5 % + 0.005 )
± (0.5 % + 0.005 )
± (0.25 % + 0.01 )
± (0.25 % + 0.01 )
ASSEMBLY SPECIFICATIONS
For the assembly on board, we recommend the lead (Pb)-free thermal profile as per J-STD-020C
TESTS
Resistance to Soldering Heat
Moisture Sensitivity Level (MSL)
Revision: 22-Apr-13
CONDITIONS
REQUIREMENTS
IEC 60115-1
IEC 60068-2-58
Solder bath method: 270 °C/10 s
± (0.5 % + 0.005 )
IPC/JEDEC J-STD-020C
85 °C/85 % RH/168 h
Level: 1
+ pass requirements of TCR
overload and dielectic strength after MSL
Document Number: 51058
2
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
D2TO35
www.vishay.com
Vishay Sfernice
CHOICE OF THE BOARD
The user must choose the board according to the working conditions of the component (power, room temperature). Maximum
working temperature must not exeed 175 °C. The dissipated power is simply calculated by the following ratio:
1
T
P = -------------------------------------------------------------------------------------------------- R TH (j - c)  +  R TH (c - h)  +  R TH (h - a) 
P:
Expressed in W
T:
Difference between maximum working temperature and room temperature or fluid cooling temperature
RTH (j - c): Thermal resistance value measured between resistive layer and outer side of the resistor. It is the thermal resistance
of the component: 4.28 °C/W.
RTH (c - h): Thermal resistance value measure 4.28 °C/W. Outer side of the resistor and upper side of the board. This is the
thermal resistance of the solder layer.
RTH (h - a): Thermal resistance of the board.
Example:
RTH (c - h) + RTH (h - a) for D2TO35 power rating 3.5 W at ambient temperature + 25 °C.
Thermal resistance RTH (j - c): 4.28 °C/W
Considering equation (1) we have:
T = 175 °C - 25 °C = 150 °C
RTH (j - c) + RTH (c - h) + RTH (h - a) = T/P = 150/3.5 = 42.8 °C/W
RTH (c - h) + RTH (h - a) = 42.8 °C/W - 4.28 °C/W = 38.52 °C/W
Single Pulse:
These informations are for a single pulse on a cold resistor at 25 °C (not already used for a dissipation) and for pulses of
100 ms maximum duration.
The formula used to calculate E is:
2
U- x t
E = P x t = ------R
with:
E (J): Pulse energy
P (W): Pulse power
t (s): Pulse duration
U (V): Pulse voltage
R (W): Resistor
The energy calculated must be less: than that allowed by the graph.
Repetitive or Superimposed Pulses:
The following formula is used to calculate the “equivalent” energy of a repetitive pulse or the “equivalent energy” of a pulse on
a resistor that is already dissipating power.
Pa
E c = E x  1 + ------

Pr 
with:
Ec (J):
Equivalent pulse energy
E (J):
Known pulse energy
Pr:
Resistor power rating
Pa:
Mean power being dissipated
The energy calculated must be less than that allowed by the graph and the average power dissipated (Pa) must not exceed the
continuous power of resistor.
Revision: 22-Apr-13
Document Number: 51058
3
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
D2TO35
www.vishay.com
Vishay Sfernice
OVERLOADS
POWER RATING
In any case the applied voltage must be lower than the
maximum overload voltage of 750 V. The values indicated
on the graph below are applicable to resistors in air or
mounted onto a board.
The temperature of the case should be maintained within the
limits specified.
RATED POWER IN %
ENERGY CURVE
100
ENERGY IN JOULES
120
10
1
0.1
100
75
50
25
0
0.01
0
20
40
80
60
100
120
140
160 175
CASE TEMPERATURE IN °C
0.001
10-7
10-6
10-5
10-4
10-3
10-2
10-1
PACKAGING
OVERLOAD DURATION IN s
• Reel
• Tube
• Tape dimensions (mm) for reel:
POWER CURVE
100 000
16
POWER IN W
4.9
10 000
15.8
24
10.6
1000
MARKING
100
10-7
10-6
10-5
10-4
10-3
10-2
10-1
Model, style, resistance value (in ), tolerance (in %),
manufacturing date, Vishay Sfernice trademark
OVERLOAD DURATION IN s
Revision: 22-Apr-13
Document Number: 51058
4
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
D2TO35
www.vishay.com
Vishay Sfernice
ORDERING INFORMATION
D2TO
35
C
100 k
±1%
XXX
e3
MODEL
STYLE
CONNECTIONS
RESISTANCE
VALUE
TOLERANCE
CUSTOM DESIGN
LEAD (Pb)-FREE
F=±1%
G=±2%
J=±5%
K = ± 10 %
Optional on request:
Shape, etc.
SAP PART NUMBERING GUIDELINES
D
2
T
O
0
3
5
C
R
2
0
0
0
K
R
E
3
GLOBAL
MODEL
SIZE
LEADS
OHMIC VALUE
TOLERANCE
PACKAGING
LEAD (Pb)-FREE
D2TO
035
C = Surface mount
The first four digits are
significant figures and the
last digit specifies the
number of zeros to follow.
R designates decimal
point.
48R70 = 48.7 
48701 = 48 700 
10002 = 100 000 
R0100 = 0.01 
R6800 = 0.68 
27000 = 2700  = 2.7 k
F=1%
G=2%
J=5%
K = 10 %
R = Reel 500 pieces
T = Tube 50 pieces
E3 = Pure tin
Revision: 22-Apr-13
Document Number: 51058
5
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free
requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference
to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21
conform to JEDEC JS709A standards.
Revision: 02-Oct-12
1
Document Number: 91000
Similar pages