Agere D371-10A D371-type digital uncooled dfb laser module Datasheet

Data Sheet
January 1999
D371-Type Digital Uncooled DFB
Laser Module
Applications
■
Long-reach SONET OC-3/OC-12 systems
■
Telecommunications
■
Secure digital data systems
Benefits
The low-profile D371-Type Laser Module is ideally suited for
short- and long-haul SONET and other high-speed digital
applications.
Features
■
Eight-pin package suitable for SONET applications
■
Narrow linewidth, distributed-feedback, multiquantum-well (DFB-MQW)1.3 µm laser with singlemode fiber pigtail
■
Wide operating temperature range:
–40 °C to +85 °C
■
No TEC required
■
High output power: typical 2.0 mW peak power
coupled into single-mode fiber
■
Hermetically sealed active components
■
Internal back-facet monitor
■
Qualification program: Telcordia Technologies *
TA-983
* Telcordia Technologies is a registered trademark of Telcordia
Technologies, Inc.
■
Easily board mounted
■
Requires no lead bending
■
No additional heat sinks required
■
Pin compatible with industry-standard, 14-pin laser
module
■
Highly efficient DFB-MQW laser structure allows
for lower threshold and drive currents, and reduced
power consumption
Description
The D371-Type Uncooled Laser Module consists of a
laser diode coupled to a single-mode fiber pigtail.
The device is available in a standard, 8-pin configuration (see Figure 1 and/or Table 1) and is ideal for
long-reach (SONET) and other high-speed digital
applications.
The laser diode is a narrow linewidth (<1 nm) DFBMQW single-mode laser and an InGaAs PIN photodiode back-facet monitor in an epoxy-free, hermetically sealed package.
Data Sheet
January 1999
D371-Type Digital Uncooled DFB Laser Module
Description (continued)
Table 1. Pin Descriptions
The device characteristics listed in this document are
met at 2.0 mW output power. Higher- or lower-power
operation is possible. Under conditions of a fixed photodiode current, the change in optical output is typically
±0.5 dB over an operating temperature range of –40 °C
to +85 °C.
Pin Number
Connection
1
2
3
4
5
6
7
8
NC/reserved
Case ground
NC/reserved
Photodiode cathode
Photodiode anode
Laser diode cathode
Laser diode anode
NC/reserved
This device incorporates the new Laser 2000 manufacturing process developed by the Optoelectronic unit of
Agere Systems Inc. Laser 2000 is a low-cost platform
that targets high-volume manufacturing and tighter
product distributions on all optical subassemblies. The
platform incorporates an advanced optical design that
is produced on a highly automated production line. The
Laser 2000 platform is qualified for the central office
and uncontrolled environments, and can be used for
applications requiring high performance and low cost.
4
3
2
1
5
6
7
8
1-900 (C)
Figure 1. D371-Type Digital Uncooled DFB Laser Module Schematic, Top View
Absolute Maximum Ratings
Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. These are absolute stress ratings only. Functional operation of the device is not implied at these or any other conditions in excess
of those given in the operations sections of the data sheet. Exposure to absolute maximum ratings for extended
periods can adversely affect device reliability.
Parameter
Maximum Peak Laser Drive Current or
Maximum Fiber Power*
Peak Reverse Laser Voltage:
Laser
Monitor
Monitor Forward Current
Operating Case Temperature Range
Storage Case Temperature Range
Lead Soldering Temperature/Time
Relative Humidity (noncondensing)
Symbol
Min
Max
Unit
IOP
PMAX
—
—
150
10
mA
mW
VRL
VRD
IFD
TC
Tstg
—
RH
—
—
—
–40
–40
—
—
2
20
2
85
85
260/10
85
V
V
mA
°C
°C
°C/s
%
* Rating varies with temperature.
2
Agere Systems Inc.
Data Sheet
January 1999
D371-Type Digital Uncooled DFB Laser Module
Handling Precautions
Caution: This device is susceptible to damage as a result of electrostatic discharge (ESD). Take proper precautions during both handling and testing. Follow guidelines such as JEDEC Publication No. 108A (Dec. 1988).
Although protection circuitry is designed into the device, take proper precautions to avoid exposure to ESD.
Electro/Optical Characteristics
Table 2. Electro/Optical Characteristics (over operating temperature range unless otherwise noted)
Parameter
Operating Temperature
Range
Optical Output Power*
Threshold Current
Modulation Current
Slope Efficiency†
Center Wavelength
Spectral Width (–20 dB)
Side-mode Suppression
Ratio
Tracking Error
Spontaneous Emission
Rise/Fall Times
Forward Voltage
Input Impedance
Monitor Current
Monitor Dark Current
Wavelength Temperature Coefficient
Symbol
Test Conditions
Min
Typ
Max
Unit
T
—
–40
—
85
°C
PF
ITH
CW, nominal
T = 25 °C
T = full range
CW, PF = 2.0 mW, T = 25 °C
CW, IMON = const. T = full range
CW, PF = 2.0 mW, T = 25 °C
PF = 2.0 mW, CW
PF = 2.0 mW, 622 Mbits/s
CW, PF = 2.0 mW
—
4
2
10
7.5
67
1280
—
30
2
11
—
20
—
—
—
—
40
—
15
50
30
55
200
1335
1
—
mW
mA
mA
mA
µW/mA
nm
nm
dB
IMON = constant, CW
I = (0.9) ITH
10%—90% pulse
T = 25 °C
CW
—
VR‡ = 5 V
VR‡ = 5 V
—
—
—
—
0.5
—
0.25
—
50
0.5
dB
µW
ns
—
3
50
—
—
1.1
—
—
10
0.09
1.6
8
1000
200
0.1
V
Ω
µA
nA
nm/°C
IMOD
SE
λC
∆λ
SMSR
TE
PTH
tR, tF
VF
R
IMON
ID
—
* 1 mW power option also available. See Table 4 for more information.
† The slope efficiency is used to calculate the modulation current for a desired output power. This modulation current plus the threshold current
comprise the total operating current for the device.
‡ VR = reverse voltage.
Agere Systems Inc.
3
Data Sheet
January 1999
D371-Type Digital Uncooled DFB Laser Module
Outline Diagram
Dimensions are in inches and (millimeters).
TRADEMARK, CODE, LASER SERIAL NUMBER,
AND/OR DATE CODE IN APPROXIMATE AREA SHOWN
4
3
2
1
5
6
7
8
1.06 (27.0)
MIN
39.37 (1000) MIN
PIGTAIL LENGTH
0.52 (13.2)
0.29
(7.37)
0.045 (1.143)
0.20 (5.00)
0.165 (4.20)
0.016 (0.410)
0.110 (2.79)
0.100 (2.54)
0.300
(7.62)
0.010
(0.254)
0.085
(2.16)
0.17
(4.32)
1
0.30
(7.62)
1-899 (C).f
4
Agere Systems Inc.
Data Sheet
January 1999
D371-Type Digital Uncooled DFB Laser Module
Qualification Information
The D371-Type Laser Module has completed and passed the following qualification tests and meets the intent of
Bellcore TR-NWT-000468 for interoffice environments and TA-TSY-000983 for outside plant environments.
Table 3. D371-Type Laser Module Qualification Test Plan
Qualification Test
Conditions
Sample Size
Reference
Mechanical Shock
500 G for P/F
1,500 G for information
11
MIL-STD-883
Method 2002
Vibration
20 g, 20 Hz—2,000 Hz
11
MIL-STD-883
Method 2007
—
11
MIL-STD-883
Method 2007
Delta T = 100 °C
11
MIL-STD-883
Method 2003
1 kg; 3 times for P/F
2 kg; 3 times for information
11
Telcordia Technologies
983
85 °C, 5,000 hrs.
25
Telcordia Technologies
983
Section 5.18
1,000 hrs. for provisional qual.
2,000 hrs. for P/F
5,000 hrs. for information
11
Telcordia Technologies
983
500 cycles for P/F
1,000 cycles for information
11
Telcordia Technologies
983
Section 5.20
10 cycles for P/F
20 cycles for information
11
Telcordia Technologies
983
Section 5.23
40 °C, 95% RH
1,000 hrs. for provisional qual.
1,344 hrs. for P/F
11
MIL-STD-202
Method 103
<5,000 ppm water vapor
11
MIL-STD-883
Method 1018
Flammability
—
—
TR357
Sec. 4.4.2.5
ESD Threshold
—
6
Telcordia Technologies
983
Section 5.22
Solderability
Thermal Shock
Fiber Pull
Accelerated (Biased) Aging
85 °C Storage
Temperature Cycling
Cyclic Moisture Resistance
Damp Heat
Internal Moisture
Agere Systems Inc.
5
Data Sheet
January 1999
D371-Type Digital Uncooled DFB Laser Module
Laser Safety Information
Class IIIb Laser Product
FDA/CDRH Class IIIb laser product. All versions are Class IIIb laser products per CDRH, 21 CFR 1040 Laser
Safety requirements. All versions are Class 3B laser products per IEC * 60825-1:1993. The device has been classified with the FDA under accession number 8720010.
This product complies with 21 CFR 1040.10 and 1040.11.
8.3 µm single-mode pigtail with optional connector.
Wavelength = 1.3 µm.
Maximum power = 10 mW.
Because of size constraints, laser safety labeling is not affixed to the module but attached to the outside of the
shipping carton.
Product is not shipped with power supply.
Caution: Use of controls, adjustments, and procedures other than those specified herein may result in
hazardous laser radiation exposure.
DANGER
INVISIBLE LASER RADIATION
IS EMITTED FROM THE END
OF FIBER OR CONNECTOR
Avoid direct exposure to beam
Do not view beam directly with
optical instruments
INVISIBLE LASER RADIATION EMITTED FROM END OF FIBER OR CONNECTOR
Avoid exposure to beam
Class 3B Laser Product IEC-60825M 1993
Max. Output: 10 mW
Wavelength: 1.3 µm
* IEC is a registered trademark of The International Electrotechnical Commission.
6
Agere Systems Inc.
Data Sheet
January 1999
D371-Type Digital Uncooled DFB Laser Module
Ordering Information
Table 4. Ordering Information
Device Code
Comcode
Operating Case
Temperature Range (°C)
Pfiber
Connector
D371-10A
D371-20A
D371-22A
D371-20B
D371-10F
D371-20F
D371-22F
D371-10N
D371-20N
D371-22N
107950941
107950958
108286527
108225376
107950982
107950990
108286535
107951006
107951014
108288382
–40 to +85
–40 to +85
0 to 65
–40 to +85
–40 to +85
–40 to +85
0 to 65
–40 to +85
–40 to +85
0 to 65
1.0 mW
2.0 mW
2.0 mW
2.0 mW
1.0 mW
2.0 mW
2.0 mW
1.0 mW
2.0 mW
2.0 mW
SC-PC
SC-PC
SC-PC
SC-APC
FC-PC
FC-PC
FC-PC
none
none
none
Agere Systems Inc.
7
D371-Type Digital Uncooled DFB Laser Module
Data Sheet
January 1999
For additional information, contact your Agere Systems Account Manager or the following:
INTERNET:
http://www.agere.com
E-MAIL:
[email protected]
N. AMERICA: Agere Systems Inc., 555 Union Boulevard, Room 30L-15P-BA, Allentown, PA 18109-3286
1-800-372-2447, FAX 610-712-4106 (In CANADA: 1-800-553-2448, FAX 610-712-4106)
ASIA PACIFIC: Agere Systems Singapore Pte. Ltd., 77 Science Park Drive, #03-18 Cintech III, Singapore 118256
Tel. (65) 778 8833, FAX (65) 777 7495
CHINA:
Agere Systems (Shanghai) Co., Ltd., 33/F Jin Mao Tower, 88 Century Boulevard Pudong, Shanghai 200121 PRC
Tel. (86) 21 50471212, FAX (86) 21 50472266
JAPAN:
Agere Systems Japan Ltd., 7-18, Higashi-Gotanda 2-chome, Shinagawa-ku, Tokyo 141, Japan
Tel. (81) 3 5421 1600, FAX (81) 3 5421 1700
EUROPE:
Data Requests: DATALINE: Tel. (44) 7000 582 368, FAX (44) 1189 328 148
Technical Inquiries: OPTOELECTRONICS MARKETING: (44) 1344 865 900 (Ascot UK)
Agere Systems Inc. reserves the right to make changes to the product(s) or information contained herein without notice. No liability is assumed as a result of their use or application.
Copyright © 2001 Agere Systems Inc.
All Rights Reserved
January 1999
DS99-022LWP (Replaces DS98-283LWP)
Similar pages