ETC1 D74H4B-250KHZ 16 pin dip 4-pole filter Datasheet

D74 & DP74 Series
1.0 Hz to 100 kHz
Fixed Frequency
16 Pin DIP
4-Pole Filters
Description
The D74 and DP74 Series of low-power, fixedfrequency, linear active filters are high performance,
4-pole filters in a compact package. These
Butterworth and Bessel low-pass and Butterworth
high-pass filters (D74 only) combine linear active
filter design with the space savings of a 16-pin dual
in-line package (DIP). Each model comes factory
tuned to a user-specified corner frequency between
1 Hz and 100 kHz (DP74, 1 Hz to 5kHz). These fully
self-contained units require no external components
or adjustments and operate with dynamic input
voltage range from non-critical ±5V to ±18V power
supplies.
Features/Benefits:
• Low cost solution for low frequency signal
conditioning
• Compact DIP design minimizes board space
requirements
• Plug-in ready-to-use, reducing engineering design
and manufacturing time
• Factory tuned, no external clocks or adjustments
needed saving time and labor of other discrete
assembly solutions
• Low harmonic distortion and wide signal-to-noise
ratio to 12 bit resolution
Applications
• Anti-alias filtering
• Vibration & shock analysis
• Automatic test equipment
• Aerospace, navigation and sonar
• Communication systems
• Medical electronics
• Sound and vibration testing
Available
D74L4B
DP74L4B
D74L4L
DP74L4L
Low-Pass Models: . . . . . . . . . . . . . . . .
4-pole Butterworth . . . . . . . . . . . . . . .2
4-pole Butterworth (Low Power) . . . . .2
4-pole Bessel . . . . . . . . . . . . . . . . . . .2
4-pole Bessel (Low Power) . . . . . . . .2
Available High-Pass Models:
D74H4B 4-pole Butterworth . . . . . . . . . . . . . . .2
General Specifications:
Pin-out/package data & ordering information . . . .3
• Noise elimination
• Process control
25 Locust St, Haverhill, Massachusetts 01830 • Tel: 800/252-7074, 978/374-0761 • FAX: 978/521-1839
e-mail: [email protected] • Web Address: http://www.freqdev.com
D74 & DP74 Series
4-Pole
Low-Pass and High-Pass Filters
Fixed Frequency
Model
D74L4B & DP74L4B
D74L4L & DP74L4L
Product Specifications
Low-Pass
Low-Pass
Transfer Function
4-Pole, Butterworth
4-Pole, Bessel
Transfer Function
4-Pole, Butterworth
Size
0.88” x 0.46” x 0.375”
0.88” x 0.46” x 0.375”
Size
0.88” x 0.46” x 0.375”
Range fc
D74
DP74
1 Hz to 100 kHz
1 Hz to 5 kHz
1 Hz to 100 kHz
1 Hz to 5 kHz
Range fc
1 Hz to 100 kHz
Theoretical Transfer
Characteristics
Appendix A
Page 7
Appendix A
Page 2
Theoretical Transfer
Characteristics
Appendix A
Page 27
Passband Ripple
0.0 dB
0.0 dB
Passband Ripple
0.0 dB
(theoretical)
0 ± 0.1 dB typ.
0 ± 0.1 dB typ.
Voltage Gain
(non-inverting)
Stopband
Attenuation Rate
24 dB/octave
fc
± 0.03% /°C
-3 dB
-180°
Filter Attenuation
0.67 dB
3.01 dB
60.0 dB
80.0 dB
± 2% max.
0.80 fc
1.00 fc
5.62 fc
10.0 fc
fc
± 0.03% /°C
-3 dB
-121°
<-70 dB
<-70 dB
Wide Band Noise
200 mVrms typ.
(20 Hz - 100 kHz)
Filter Mounting
Assembly
24 dB/octave
Power Bandwidth
120 kHz
Small Signal Bandwidth
(-6 dB) 1 MHz
± 2% max.
Cutoff Frequency
Stability
Amplitude
Phase
fc
± 0.03% /°C
-3 dB
-180°
0.80 fc
1.00 fc
8.48 fc
15.12 fc
Filter Attenuation
80 dB
60 dB
3.01 dB
0.00 dB
1.86 dB
3.01 dB
60.0 dB
80.0 dB
<-70 dB
<-70 dB
Narrow Band Noise
Stopband
Attenuation Rate
24 dB/octave
Total Harmonic
Distortion @ 1 kHz
D74
DP74
(5 Hz - 2 MHz)
0 ± 0.1 dB to 100 kHz
(non-inverting)
Cutoff Frequency
Stability
Amplitude
Phase
(theoretical)
D74H4B
High-Pass
(theoretical)
DC Voltage Gain
Model
(theoretical)
Total Harmonic
Distortion @ 1 kHz
D74
<-70 dB
200 mVrms typ.
Wide Band Noise
400 mVrms typ.
50 mVrms typ.
50 mVrms typ.
Narrow Band Noise
FMA-01A
FMA-01A
Filter Mounting
Assembly
(5 Hz - 2 MHz)
(20 Hz - 100 kHz)
± 2% max.
0.10 fc
0.18 fc
1.00 fc
4.00 fc
100 mVrms typ.
FMA-01A
2
25 Locust St, Haverhill, Massachusetts 01830 • Tel: 800/252-7074, 978/374-0761 • FAX: 978/521-1839
e-mail: [email protected] • Web Address: http://www.freqdev.com
D74 & DP74 Series
Pin-Out and Package Data
Ordering Information
Specification
(25°C and Vs ± 15 Vdc)
1
All dimensions are in inches
Analog Input Characteristics
Impedance
10 kW min.
Voltage Range
± 10 Vpeak
Max. Safe Voltage
± Vs
IN
1
All case dimensions ± 0.01"
-Vs
8
Grid Dimensions 0.1" x 0.1"
15
GND
Analog Output Characteristics
Impedance
1W
Linear Operating Range± 10 V
2
Maximum Current
D74 ± 10 mA
DP74 ± 5 mA
Offset Voltage
10 mV max.
1
3 mV typ.
Offset Temp. Coeff.
20 mV / °C
12 11
+Vs OUT
BOTTOM VIEW
➝
0.46 ➝
➝ (max.)
0.88
(max.)
➝
➝
0.375
➝
(max.)
0.15
➝ ➝ 0.025
(dia.)
➝ ➝ 0.10
(min.)
0.30
(typ.)
➝
➝
➝
Power Supply (±V)
Rated Voltage
± 15 Vdc
Operating Range
± 5 to ± 18 Vdc
Maximum Safe Voltage ± 18 Vdc
Quiescent Current D74
5 mA max.
3 mA typ.
Quiescent Current DP74
1 mA max.
600 mA typ.
Temperature
Operating
- 0 to + 70 °C
Storage
- 25 to + 85 °C
FRONT VIEW
0.09
(typ.)
➝ ➝
(typ.)
SIDE VIEW
Filter Mounting Assembly-See FMA-01A
Ordering Information
Filter Type
Transfer Function
L - Low Pass
H - High Pass
B - Butterworth
L - Bessel
Notes:
1. Input and output signal voltage referenced to
supply common.
2. Output is short circuit protected to common.
DO NOT CONNECT TO ±Vs.
D74L4B-849 Hz
Power Level
D – Standard Power
DP – Low Power
3
- 3 dB Corner Frequency
e.g., 849 Hz
2.50 kHz
33.3 kHz
3. How to Specify Corner Frequency:
Corner frequencies are specified by attaching a three digit frequency designator to the
basic model number. Corner frequencies can range from 1 Hz to 100 kHz.
We hope the information given here will be helpful. The information is based on data and our best knowledge, and we consider the information to be true and accurate. Please read all statements,
recommendations or suggestions herein in conjunction with our conditions of sale which apply to all goods supplied by us. We assume no responsibility for the use of these statements,
recommendations or suggestions, nor do we intend them as a recommendation for any use which would infringe any patent or copyright.
IN-00D74-01
3
25 Locust St, Haverhill, Massachusetts 01830 • Tel: 800/252-7074, 978/374-0761 • FAX: 978/521-1839
e-mail: [email protected] • Web Address: http://www.freqdev.com
Low-Pass
4-Pole
Appendix A
Bessel
Theoretical Transfer Characteristics
1
f/fc
Amp
Phase
Delay
(Hz)
(dB)
(deg)
(sec)
0.00
0.00
0.00
.336
0.10
-0.028
-12.1
.336
0.20
-0.111
-24.2
.336
0.30
-0.251
-36.3
.336
0.40
-0.448
-48.4
.336
0.50
-0.705
-60.6
.336
0.60
-1.02
-72.7
.336
0.70
-1.41
-84.8
.336
0.80
-1.86
-96.8
.335
0.85
-2.11
-103
.334
0.90
-2.40
-109
.333
0.95
-2.69
-115
.332
1.00
-3.01
-121
.330
1.10
-3.71
-133
.325
1.20
-4.51
-144
.318
1.30
-5.39
-156
.308
-166
1.40
-6.37
.295
-177
1.50
-7.42
.280
-187
1.60
-8.54
.263
-195
1.70
-9.71
.246
-204
1.80
-10.9
.228
1.90
-12.2
-212
.211
2.00
-13.4
-219
.194
2.25
-16.5
-235
.158
2.50
-19.5
-248
.129
2.75
-22.4
-259
.107
-267
3.00
-25.1
.089
-275
3.25
-27.6
.076
-281
3.50
-30.0
.065
-291
4.00
-34.4
.049
-305
5.00
-41.9
.031
6.00
-315
.021
-48.1
7.00
-321
.016
-53.4
8.00
-326
.012
-58.0
9.00
-330
.009
-62.0
10.0
-333
.008
-65.7
Frequency Response
Amp (dB)
0
-40
-60
-80
-100
0.1
2
3 4 5 6 78
1.0 2 3 4 5 6 7 10.0
Normalized Frequency(f/fc)
Delay (Normalized)
Delay (sec)
1.0
0.5
0.0
0.1
0.15 2
3
4
5 6 7 89
1.0 1.5
Normalized Time (1/f sec)
Step Response (V/V)
Step Response
1.Normalized Group Delay:
The above delay data is normalized to a corner frequency
of 1.0Hz.The actual delay is the normalized delay divided
by the actual corner frequency (fc).
Actual Delay =
-20
1.2
1.0
0.8
0.6
0.4
0.2
-0.0
-0.2
0
1
2
3
4
Normalized Time (1/f sec)
Normalized Delay
Actual Corner Frequency (fc) in Hz
2
25 Locust St., Haverhill, Massachusetts 01830 ∑Tel :800/252-7074, 978/374-0761 ∑FAX:978/521-1839
e-mail: [email protected] ∑Web Address: http://www.freqdev.com ∑Fax on Demand: 978/521-5178
5
Low-Pass
4-Pole
Appendix A
Butterworth
Theoretical Transfer Characteristics
1
f/fc
Amp
Phase
Delay
(Hz)
(dB)
(deg)
(sec)
0.00
0.00
0.00
.416
0.10
0.00
-15.0
.418
0.20
0.00
-30.1
.423
0.30
-0.00
-45.5
.433
0.40
-0.003
-61.4
.449
0.50
-0.017
-78.0
.474
0.60
-0.072
-95.7
.511
0.70
-0.243
-115
.558
0.80
-0.674
-136
.604
0.85
-1.047
-147
.619
0.90
-1.555
-158
.622
0.95
-2.21
-169
.612
1.00
-3.01
-180
.588
1.10
-4.97
-200
.513
1.20
-7.24
-217
.427
1.30
-9.62
-231
.350
1.40
-12.0
-242
.289
1.50
-14.3
-252
.241
1.60
-16.4
-260
.204
1.70
-18.5
-266
.175
1.80
-20.5
-272
.152
1.90
-22.3
-277
.134
2.00
-24.1
-282
.119
2.25
-28.2
-291
.091
2.50
-31.8
-299
.072
2.75
-35.1
-304
.059
3.00
-38.2
-309
.049
3.25
-41.0
-313
.041
3.50
-43.5
-317
.035
4.00
-48.2
-322
.027
5.00
-55.9
-330
.017
6.00
-62.3
-335
.012
7.00
-67.6
-339
.009
8.00
-72.2
-341
.007
9.00
-76.3
-343
.005
-80.0
10.0
-345
.004
Frequency Response
Amp (dB)
0
-40
-60
-80
-100
0.1
2
3 4 5 6 78
1.0 2 3 4 5 6 7 10.0
Normalized Frequency(f/fc)
Delay (Normalized)
Delay (sec)
2.0
1.0
0.0
0.1
0.15 2
3
4
5 6 7 89
1.0 1.5
Normalized Frequency(f/fc)
Step Response (V/V)
Step Response
1.Normalized Group Delay:
The above delay data is normalized to a corner frequency
of 1.0Hz.The actual delay is the normalized delay divided
by the actual corner frequency (fc).
Actual Delay =
-20
1.2
1.0
0.8
0.6
0.4
0.2
-0.0
0
1
2
3
4
Normalized Time (1/f sec)
Normalized Delay
Actual Corner Frequency (fc) in Hz
7
25 Locust St., Haverhill, Massachusetts 01830 ∑Tel :800/252-7074, 978/374-0761 ∑FAX:978/521-1839
e-mail: [email protected] ∑Web Address: http://www.freqdev.com ∑Fax on Demand: 978/521-5178
5
High-Pass
4-Pole
Appendix A
Butterworth
Theoretical Transfer Characteristics
1
f/fc
Amp
Phase
Delay
(Hz)
(dB)
(deg)
(sec)
0.10
-80.0
345
.418
-55.9
0.20
330
.423
-41.8
0.30
314
.433
-31.8
0.40
299
.449
-24.1
0.50
282
.474
0.60
-17.8
264
.511
0.70
-12.6
245
.558
0.80
-8.43
224
.604
0.85
-6.69
213
.619
202
0.90
-5.22
.622
0.95
-3.99
191
.612
1.00
-3.01
180
.588
1.20
-0.908
143
.427
.289
1.40
-0.285
118
.204
1.60
-0.100
100
1.80
-0.039
87.6
.152
2.00
-0.017
78.0
.119
61.4
2.50
-0.003
.072
-0.001
50.7
3.00
.049
0.00
37.8
4.00
.027
5.00
0.00
30.1
.017
6.00
0.00
25.1
.012
7.00
0.00
21.4
.009
0.00
8.00
18.8
.007
0.00
9.00
16.7
.005
10.0
0.00
15.0
.004
Frequency Response
Amp (dB)
0
-20
-40
-60
-80
-100
0.1
2
3 4 5 6 78
1.0 2 3 4 5 6 7 10.0
Normalized Frequency(f/fc)
1.Normalized Group Delay:
The above delay data is normalized to a corner frequency
of 1.0Hz.The actual delay is the normalized delay divided
by the actual corner frequency (fc).
Actual Delay =
Normalized Delay
Actual Corner Frequency (fc) in Hz
27
25 Locust St., Haverhill, Massachusetts 01830 ∑Tel :800/252-7074, 978/374-0761 ∑FAX:978/521-1839
e-mail: [email protected] ∑Web Address: http://www.freqdev.com ∑Fax on Demand: 978/521-5178
Similar pages