Burr-Brown DAC7624U 12-bit quad voltage output digital-to-analog converter Datasheet

DAC7624
DAC7625
®
DAC
762
4
DAC
762
5
12-Bit Quad Voltage Output
DIGITAL-TO-ANALOG CONVERTER
FEATURES
DESCRIPTION
● LOW POWER: 20mW
The DAC7624 and DAC7625 are 12-bit quad voltage
output digital-to-analog converters with guaranteed 12bit monotonic performance over the specified temperature range. They accept 12-bit parallel input data, have
double-buffered DAC input logic (allowing simultaneous update of all DACs), and provide a readback
mode of the internal input registers. An asynchronous
reset clears all registers to a mid-scale code of 800H
(DAC7624) or to a zero-scale of 000H (DAC7625). The
DAC7624 and DAC7625 can operate from a single +5V
supply or from +5V and –5V supplies.
Low power and small size per DAC make the DAC7624
and DAC7625 ideal for automatic test equipment,
DAC-per-pin programmers, data acquisition systems,
and closed-loop servo-control. The DAC7624 and
DAC7625 are available in a 28-pin plastic doublewide or a 28-lead SOIC package, and offer guaranteed
specifications over the –40°C to +85°C temperature
range.
● UNIPOLAR OR BIPOLAR OPERATION
● SETTLING TIME: 10µs to 0.012%
● 12-BIT LINEARITY AND MONOTONICITY:
–40°C to +85°C
● RESET TO MID-SCALE (DAC7624) OR
ZERO-SCALE (DAC7625)
● DATA READBACK
● DOUBLE-BUFFERED DATA INPUTS
APPLICATIONS
● PROCESS CONTROL
● ATE PIN ELECTRONICS
● CLOSED-LOOP SERVO-CONTROL
● MOTOR CONTROL
● DATA ACQUISITION SYSTEMS
● DAC-PER-PIN PROGRAMMERS
VDD
GND
12
DB0-DB11
I/O
Buffer
A0
A1
R/W
CS
Control
Logic
VREFH
Input
Register A
DAC
Register A
DAC A
VOUTA
Input
Register B
DAC
Register B
DAC B
VOUTB
Input
Register C
DAC
Register C
DAC C
VOUTC
Input
Register D
DAC
Register D
DAC D
VOUTD
RESET
LDAC
VREFL
VSS
International Airport Industrial Park • Mailing Address: PO Box 11400, Tucson, AZ 85734 • Street Address: 6730 S. Tucson Blvd., Tucson, AZ 85706 • Tel: (520) 746-1111 • Twx: 910-952-1111
Internet: http://www.burr-brown.com/ • FAXLine: (800) 548-6133 (US/Canada Only) • Cable: BBRCORP • Telex: 066-6491 • FAX: (520) 889-1510 • Immediate Product Info: (800) 548-6132
®
© 1997 Burr-Brown Corporation
PDS-1419C
1
Printed in U.S.A. April, 2000
DAC7624/7625
SPECIFICATION
At TA = –40°C to +85°C, VDD = +5V, VSS = –5V, VREFH = +2.5V, VREFL = –2.5V, unless otherwise noted.
DAC7624P, U
DAC7625P, U
PARAMETER
CONDITIONS
ACCURACY
Linearity Error(1)
Linearity Matching(3)
Differential Linearity Error
Monotonicity
Zero-Scale Error
Zero-Scale Drift
Zero-Scale Matching(3)
Full-Scale Error
Full-Scale Matching(3)
Zero-Scale Error
Zero-Scale Drift
Zero-Scale Matching(3)
Full-Scale Error
Full-Scale Matching(3)
Power Supply Rejection
VSS = 0V or –5V
VSS = 0V or –5V
VSS = 0V or –5V
TMIN to TMAX
Code = 000H
TYP
MAX
MIN
Code = 00AH, VSS = 0V
VSS = 0V
VSS = 0V
Code = FFFH, VSS = 0V
VSS = 0V
5
±4
5
±2
±4
±2
±8
10
±4
±8
±4
✻
✻
0
VREFL
–1.25
VREFH
VREFH
+1.25
No Oscillation
REFERENCE INPUT
VREFH Input Range
VREFL Input Range
VREFL Input Range
VSS = 0V or –5V
VSS = 0V
VSS = –5V
DYNAMIC PERFORMANCE
Settling Time(5)
Channel-to-Channel Crosstalk
Output Noise Voltage
DIGITAL INPUT/OUTPUT
Logic Family
Logic Levels
VIH
VIL
VOH
VOL
Data Format
IIH ≤ ±10µA
IIL ≤ ±10µA
IOH = –0.8mA
I OL = 1.6mA
POWER SUPPLY REQUIREMENTS
VDD
VSS
IDD
ISS
Power Dissipation
If VSS ≠ 0V
VREFL +1.25
0
–2.5
✻
✻
✻
✻
✻
10
40
✻
TTL-Compatible CMOS
✻
2.4
–0.3
3.6
0.0
VDD +0.3
0.8
VDD
0.4
Straight Binary
4.75
–5.25
VSS = –5V
VSS = 0V
–40
±1
±1
±1
LSB(2)
LSB
LSB
Bits
LSB
ppm/°C
LSB
LS
LSB
LSB
ppm/°C
LSB
LSB
LSB
ppm/V
1.5
–1.6
15
7.5
✻
✻
±1
✻
±1
✻
✻
±2
✻
±2
✻
✻
✻
V
V
mA
pF
mA
✻
✻
✻
V
V
V
✻
µs
LSB
✻
✻
✻
+2.5
VREFH –1.25
VREFH –1.25
5
0.25
–2.1
DAC7624P, U, PB, UB
DAC7625P, U, PB, UB
✻
✻
✻
100
+5, –120
Momentary
To ±0.012%
Full-Scale Step
On any other DAC
0Hz to 1MHz
UNITS
✻
30
Output Current
Load Capacitance
Short-Circuit Current
Short-Circuit Duration
MAX
✻
12
Code = FFFH
VREFL = 0V, VSS = 0V
VSS = –5V
TYP
±2
±2
±1
2
ANALOG OUTPUT
Voltage Output(4)
TEMPERATURE RANGE
Specified Performance
MIN
DAC7624PB, UB
DAC7625PB, UB
5.25
–4.75
1.9
✻
✻
✻
✻
✻
✻
✻
✻
V
V
V
V
✻
✻
✻
✻
✻
V
V
mA
mA
mW
mW
✻
°C
✻
✻
✻
✻
20
10
+85
nV/√Hz
✻
✻
✻
✻
✻
NOTES: (1) If VSS = 0V, specification applies at code 00AH and above. (2) LSB means Least Significant Bit, when V REFH equals +2.5V and VREFL equals –2.5V,
then one LSB equals 1.22mV. (3) All DAC outputs will match within the specified error band. (4) Ideal output voltage, does not take into account zero or full-scale
error. (5) If VSS = –5V, full-scale 5V step. If VSS = 0V, full-scale positive 2.5V step and negative step from code FFFH to 00AH.
The information provided herein is believed to be reliable; however, BURR-BROWN assumes no responsibility for inaccuracies or omissions. BURR-BROWN assumes
no responsibility for the use of this information, and all use of such information shall be entirely at the user’s own risk. Prices and specifications are subject to change
without notice. No patent rights or licenses to any of the circuits described herein are implied or granted to any third party. BURR-BROWN does not authorize or warrant
any BURR-BROWN product for use in life support devices and/or systems.
®
DAC7624/7625
2
ELECTROSTATIC
DISCHARGE SENSITIVITY
ABSOLUTE MAXIMUM RATINGS(1)
VDD to VSS ............................................................................. –0.3V to 11V
VDD to GND .......................................................................... –0.3V to 5.5V
VREFL to VSS .............................................................. –0.3V to (VDD – VSS)
VDD to VREFH ............................................................. –0.3V to (VDD – VSS)
VREFH to VREFL .......................................................... –0.3V to (VDD – VSS)
Digital Input Voltage to GND ................................... –0.3V to VDD + 0.3V
Digital Output Voltage to GND ................................. –0.3V to VDD + 0.3V
Maximum Junction Temperature ................................................... +150°C
Operating Temperature Range ........................................ –40°C to +85°C
Storage Temperature Range ......................................... –65°C to +150°C
Lead Temperature (soldering, 10s) ............................................... +300°C
This integrated circuit can be damaged by ESD. Burr-Brown
recommends that all integrated circuits be handled with
appropriate precautions. Failure to observe proper handling
and installation procedures can cause damage.
ESD damage can range from subtle performance degradation
to complete device failure. Precision integrated circuits may
be more susceptible to damage because very small parametric
changes could cause the device not to meet its published
specifications.
NOTE: (1) Stresses above those listed under “Absolute Maximum Ratings”
may cause permanent damage to the device. Exposure to absolute maximum
conditions for extended periods may affect device reliability.
PACKAGE/ORDERING INFORMATION
MAXIMUM
LINEARITY
ERROR (LSB)
MAXIMUM
DIFFERENTIAL
LINEARITY
ERROR (LSB)
SPECIFICATION
TEMPERATURE
RANGE
PACKAGE
PACKAGE
DRAWING
NUMBER(1)
DAC7624P
DAC7624U
DAC7624PB
DAC7624UB
±2
±2
±1
±1
±1
±1
±1
±1
–40°C to +85°C
–40°C to +85°C
–40°C to +85°C
–40°C to +85°C
28-Pin Plastic DIP
28-Lead SOIC
28-Pin Plastic DIP
28-Lead SOIC
215
217
215
217
DAC7625P
DAC7625U
DAC7625PB
DAC7625UB
±2
±2
±1
±1
±1
±1
±1
±1
–40°C to +85°C
–40°C to +85°C
–40°C to +85°C
–40°C to +85°C
28-Pin Plastic DIP
28-Lead SOIC
28-Pin Plastic DIP
28-Lead SOIC
215
217
215
217
PRODUCT
NOTE: (1) For detailed drawing and dimension table, please see end of data sheet, or Appendix C of Burr-Brown IC Data Book.
®
3
DAC7624/7625
PIN CONFIGURATIONS
Top View
DIP
SOIC
VREFH
1
28
VREFL
VREFH
1
28
VREFL
VOUTB
2
27
VOUTC
VOUTB
2
27
VOUTC
VOUTA
3
26
VOUTD
VOUTA
3
26
VOUTD
VSS
4
25
VDD
VSS
4
25
VDD
GND
5
24
NIC
GND
5
24
NIC
RESET
6
23
CS
RESET
6
23
CS
LDAC
7
22
A0
LDAC
7
22
A0
(LSB) DB0
8
21
A1
(LSB) DB0
8
21
A1
DB1
9
20
R/W
DB1
9
20
R/W
DB2 10
19
DB11 (MSB)
DB2 10
19
DB11 (MSB)
DB3 11
18
DB10
DB3 11
18
DB10
DB4 12
17
DB9
DB4 12
17
DB9
DB5 13
16
DB8
DB5 13
16
DB8
DB6 14
15
DB7
DB6 14
15
DB7
DAC7624
DAC7625
DAC7624
DAC7625
PIN DESCRIPTIONS
PIN
NAME
DESCRIPTION
1
VREFH
Reference Input Voltage High. Sets maximum output voltage for all DACs.
2
VOUTB
DAC B Voltage Output.
3
VOUTA
DAC A Voltage Output.
4
VSS
5
GND
6
RESET
7
LDAC
8
DB0
9
DB1
Data Bit 1
10
DB2
Data Bit 2
11
DB3
Data Bit 3
12
DB4
Data Bit 4
13
DB5
Data Bit 5
14
DB6
Data Bit 6
15
DB7
Data Bit 7
16
DB8
Data Bit 8
17
DB9
Data Bit 9
18
DB10
Data Bit 10
19
DB11
Data Bit 11. Most significant bit of 12-bit word.
20
R/W
Read/Write Control Input (read = HIGH, write = LOW).
21
A1
Register/DAC Select (C or D = HIGH, A or B = LOW).
22
A0
Register/DAC Select (B or D = HIGH, A or C = LOW).
23
CS
Chip Select Input.
24
NIC
Not Internally Connected. Pin has no internal connection to the device.
25
VDD
Positive Analog Supply Voltage, +5V nominal.
26
VOUTD
DAC D Voltage Output.
27
VOUTC
DAC C Voltage Output.
28
VREFL
Reference Input Voltage Low. Sets minimum output voltage for all DACs.
Negative Analog Supply Voltage, 0V or –5V.
Ground.
Asynchronous Reset Input. Sets DAC and input registers to either mid-scale (800H, DAC7624) or zero-scale (000H, DAC7625)
when LOW.
Load DAC Input. All DAC Registers are transparent when LOW.
Data Bit 0. Least significant bit of 12-bit word.
®
DAC7624/7625
4
TYPICAL PERFORMANCE CURVES: VSS = 0V
At TA = +25°C, VDD = +5V, VSS = 0V, VREFH = +2.5V, VREFL = 0V, representative unit, unless otherwise specified.
0.50
0.25
0.25
LE (LSB)
0.50
0.00
–0.25
–0.50
0.50
0.50
0.25
0.00
–0.25
200H
400H
600H
800H
A00H
C00H
0.25
0.00
–0.25
–0.50
000H
E00H FFFH
600H
800H
A00H
C00H
E00H FFFH
LINEARITY ERROR AND
DIFFERENTIAL LINEARITY ERROR vs CODE
(DAC C)
LINEARITY ERROR AND
DIFFERENTIAL LINEARITY ERROR vs CODE
(DAC D)
0.25
LE (LSB)
0.50
0.25
0.00
–0.25
0.00
–0.25
–0.50
–0.50
0.50
0.50
0.25
0.00
–0.25
200H
400H
600H
800H
A00H
C00H
0.25
0.00
–0.25
–0.50
000H
E00H FFFH
400H
600H
800H
A00H
C00H
Digital Input Code
LINEARITY ERROR vs CODE
(DAC A, –40°C and +85°C)
LINEARITY ERROR vs CODE
(DAC B, –40°C and +85°C)
0.50
0.25
0.25
LE (LSB)
0.50
0.00
–0.25
E00H FFFH
0.00
–0.25
+85°C
–0.50
0.50
0.50
0.25
0.25
LE (LSB)
–0.50
0.00
–0.25
–40°C
–0.50
000H 200H
200H
Digital Input Code
+85°C
LE (LSB)
400H
Digital Input Code
0.50
–0.50
000H
200H
Digital Input Code
DLE (LSB)
LE (LSB)
DLE (LSB)
0.00
–0.25
–0.50
–0.50
000H
LE (LSB)
LINEARITY ERROR AND
DIFFERENTIAL LINEARITY ERROR vs CODE
(DAC B)
DLE (LSB)
DLE (LSB)
LE (LSB)
LINEARITY ERROR AND
DIFFERENTIAL LINEARITY ERROR vs CODE
(DAC A)
400H
600H
800H
A00H
C00H
0.00
–0.25
–40°C
–0.50
000H 200H
E00H FFFH
Digital Input Code
400H
600H
800H
A00H
C00H
E00H FFFH
Digital Input Code
®
5
DAC7624/7625
TYPICAL PERFORMANCE CURVES: VSS = 0V
(CONT)
At TA = +25°C, VDD = +5V, VSS = 0V, VREFH = +2.5V, VREFL = 0V, representative unit, unless otherwise specified.
LINEARITY ERROR vs CODE
(DAC D, –40°C and +85°C)
0.50
0.50
0.25
0.25
LE (LSB)
LE (LSB)
LINEARITY ERROR vs CODE
(DAC C, –40°C and +85°C)
0.00
–0.25
0.00
–0.25
+85°C
0.50
0.50
0.25
0.25
LE (LSB)
–0.50
0.00
–0.25
–40°C
–0.50
000H 200H
6
400H
600H
800H
A00H
C00H
0.00
–0.25
–40°C
–0.50
000H 200H
E00H FFFH
400H
600H
800H
A00H
C00H
E00H FFFH
Digital Input Code
Digital Input Code
ZERO-SCALE ERROR vs TEMPERATURE
(Code 010H)
FULL-SCALE ERROR vs TEMPERATURE
(Code FFFH)
6
5
5
4
Full-Scale Error (LSB)
Zero-Scale Error (LSB)
LE (LSB)
+85°C
–0.50
DAC D
3
DAC B
2
DAC A
DAC C
1
0
–1
4
DAC D
DAC B
3
DAC A
2
1
DAC C
0
–1
–2
–2
–40
–20
0
20
40
60
80
100
–40
Temperature (°C)
0
20
40
Temperature (°C)
®
DAC7624/7625
–20
6
60
80
100
TYPICAL PERFORMANCE CURVES: VSS = –5V
At TA = +25°C, VDD = +5V, VSS = –5V, VREFH = +2.5V, VREFL = –2.5V, representative unit, unless otherwise specified.
0.50
0.25
0.25
LE (LSB)
0.50
0.00
–0.25
–0.50
0.50
0.50
0.25
0.00
–0.25
200H
400H
600H
800H
A00H
C00H
0.25
0.00
–0.25
–0.50
000H
E00H FFFH
600H
800H
A00H
C00H
E00H FFFH
LINEARITY ERROR AND
DIFFERENTIAL LINEARITY ERROR vs CODE
(DAC C)
LINEARITY ERROR AND
DIFFERENTIAL LINEARITY ERROR vs CODE
(DAC D)
0.25
LE (LSB)
0.50
0.25
0.00
–0.25
0.00
–0.25
–0.50
–0.50
0.50
0.50
0.25
0.00
–0.25
200H
400H
600H
800H
A00H
C00H
0.25
0.00
–0.25
–0.50
000H
E00H FFFH
400H
600H
800H
A00H
C00H
Digital Input Code
LINEARITY ERROR vs CODE
(DAC A, –40°C and +85°C)
LINEARITY ERROR vs CODE
(DAC B, –40°C and +85°C)
0.50
0.25
0.25
LE (LSB)
0.50
0.00
–0.25
E00H FFFH
0.00
–0.25
+85°C
–0.50
0.50
0.50
0.25
0.25
LE (LSB)
–0.50
0.00
–0.25
–40°C
–0.50
000H 200H
200H
Digital Input Code
+85°C
LE (LSB)
400H
Digital Input Code
0.50
–0.50
000H
200H
Digital Input Code
DLE (LSB)
LE (LSB)
DLE (LSB)
0.00
–0.25
–0.50
–0.50
000H
LE (LSB)
LINEARITY ERROR AND
DIFFERENTIAL LINEARITY ERROR vs CODE
(DAC B)
DLE (LSB)
DLE (LSB)
LE (LSB)
LINEARITY ERROR AND
DIFFERENTIAL LINEARITY ERROR vs CODE
(DAC A)
400H
600H
800H
A00H
C00H
0.00
–0.25
–40°C
–0.50
000H 200H
E00H FFFH
Digital Input Code
400H
600H
800H
A00H
C00H
E00H FFFH
Digital Input Code
®
7
DAC7624/7625
TYPICAL PERFORMANCE CURVES: VSS = –5V
(CONT)
At TA = +25°C, VDD = +5V, VSS = –5V, VREFH = +2.5V, VREFL = –2.5V, representative unit, unless otherwise specified.
LINEARITY ERROR vs CODE
(DAC D, –40°C and +85°C)
0.50
0.50
0.25
0.25
LE (LSB)
LE (LSB)
LINEARITY ERROR vs CODE
(DAC C, –40°C and +85°C)
0.00
–0.25
0.00
–0.25
+85°C
0.50
0.50
0.25
0.25
LE (LSB)
–0.50
0.00
–0.25
Zero-Scale Error (LSB)
–40°C
–0.50
000H 200H
400H
600H
800H
A00H
C00H
0.00
–0.25
–40°C
–0.50
000H 200H
E00H FFFH
800H
A00H
C00H
E00H FFFH
ZERO-SCALE ERROR vs TEMPERATURE
(Code 000H)
FULL-SCALE ERROR vs TEMPERATURE
(Code FFFH)
3.0
2.5
2.5
2.0
DAC D
1.5
DAC B
DAC A
DAC C
0.5
600H
Digital Input Code
3.0
1.0
400H
Digital Input Code
Full-Scale Error (LSB)
LE (LSB)
+85°C
–0.50
0.0
–0.5
2.0
DAC D
1.5
DAC B
DAC A
1.0
DAC C
0.5
0.0
–0.5
–1.0
–1.0
–40
–20
0
20
40
60
80
100
–40
Temperature (°C)
0
20
40
Temperature (°C)
®
DAC7624/7625
–20
8
60
80
100
THEORY OF OPERATION
are set by the external voltage references (VREFL and VREFH,
respectively). The digital input is a 12-bit parallel word and
the DAC input registers offer a readback capability. The
converters can be powered from a single +5V supply or a
dual ±5V supply. Each device offers a reset function which
immediately sets all DAC output voltages and DAC registers to mid-scale (DAC7624, code 800H) or to zero-scale
(DAC7625, code 000H). See Figures 1 and 2 for the basic
operation of the DAC7624/25.
The DAC7624 and DAC7625 are quad, voltage output,
12-bit digital-to-analog converters (DACs). The architecture
is a classic R-2R ladder configuration followed by an operational amplifier that serves as a buffer. Each DAC has its
own R-2R ladder network and output op-amp, but all share
the reference voltage inputs. The minimum voltage output
(“zero-scale”) and maximum voltage output (“full-scale”)
DAC7624
DAC7625
+2.500V
0.1µF
1
VREFH
VREFL
28
0V to +2.5V
2
VOUTB
VOUTC
27
0V to +2.5V
0V to +2.5V
3
VOUTA
VOUTD
26
0V to +2.5V
4
VSS
VDD
25
5
GND
NIC
24
Reset DACs(1)
6
RESET
CS
23
Load DAC Registers
7
LDAC
A0
22
8
DB0
A1
21
9
DB1
R/W
20
10
DB2
DB11
19
0.1µF
Data Bus
11
DB3
DB10
18
12
DB4
DB9
17
13
DB5
DB8
16
14
DB6
DB7
15
+5V
1µF to 10µF
+
Chip Select
Address Bus
or Decoder
Read/Write
Data Bus
NOTE: (1) Reset LOW sets all DACs to code 800H on the DAC7624 and to code 000H on the DAC7625.
FIGURE 1. Basic Single-Supply Operation of the DAC7624/25.
DAC7624
DAC7625
+2.500V
–2.500V
0.1µF
–5V
+
0.1µF
1
VREFH
VREFL
28
–2.5V to +2.5V
2
VOUTB
VOUTC
27
–2.5V to +2.5V
–2.5V to +2.5V
3
VOUTA
VOUTD
26
–2.5V to +2.5V
4
VSS
VDD
25
5
GND
NIC
24
Reset DACs(1)
6
RESET
CS
23
Load DAC Registers
7
LDAC
A0
22
8
DB0
A1
21
9
DB1
R/W
20
10
DB2
DB11
19
11
DB3
DB10
18
12
DB4
DB9
17
13
DB5
DB8
16
14
DB6
DB7
15
1µF to 10µF
0.1µF
Data Bus
0.1µF
1µF to 10µF
+5V
+
Chip Select
Address Bus
or Decoder
Read/Write
Data Bus
NOTE: (1) Reset LOW sets all DACs to code 800H on the DAC7624 and to code 000H on the DAC7625.
FIGURE 2. Basic Dual-Supply Operation of the DAC7624/25.
®
9
DAC7624/7625
ANALOG OUTPUTS
The current into the VREFH input depends on the DAC output
voltages and can vary from a few microamps to approximately 0.5 milliamp. The VREFH source will not be required
to sink current, only source it. Bypassing the reference
voltage or voltages with at least a 0.1uF capacitor placed as
close to the DAC7624/25 package is strongly recommended.
When VSS = –5V (dual supply operation), the output amplifier can swing to within 2.25V of the supply rails, guaranteed over the –40°C to +85°C temperature range. With VSS
= 0V (single-supply operation), the output can swing to
ground. Note that the settling time of the output op-amp will
be longer with voltages very near ground. Also, care must be
taken when measuring the zero-scale error when VSS = 0V.
Since the output voltage cannot swing below ground, the
output voltage may not change for the first few digital input
codes (000H, 001H, 002H, etc.) if the output amplifier has a
negative offset.
DIGITAL INTERFACE
Table I shows the basic control logic for the DAC7624/25.
Note that each internal register is level triggered and not
edge triggered. When the appropriate signal is LOW, the
register becomes transparent. When this signal is returned
HIGH, the digital word currently in the register is latched.
The first set of registers (the Input Registers) are triggered
via the A0, A1, R/W, and CS inputs. Only one of these
registers is transparent at any given time. The second set of
registers (the DAC Registers) are all transparent when LDAC
input is pulled LOW.
The behavior of the output amplifier can be critical in some
applications. Under short circuit conditions (DAC output
shorted to ground), the output amplifier can sink a great deal
more current than it can source. See the specification table
for more details concerning short circuit current.
REFERENCE INPUTS
Each DAC can be updated independently by writing to the
appropriate Input Register and then updating the DAC
Register. Alternatively, the entire DAC Register set can be
configured as always transparent by keeping LDAC LOW—
the DAC update will occur when the Input Register is
written.
The reference inputs, VREFL and VREFH, can be any voltage
between VSS+2.25V and VDD–2.25V provided that VREFH is
at least 1.25V greater than VREFL. The minimum output of
each DAC is equal to VREFL plus a small offset voltage
(essentially, the offset of the output op-amp). The maximum
output is equal to VREFH plus a similar offset voltage. Note
that VSS (the negative power supply) must either be
connected to ground or must be in the range of –4.75V to
–5.25V. The voltage on VSS sets several bias points within
the converter, if VSS is not in one of these two configurations, the bias values may be in error and proper operation
of the device is not guaranteed.
The double buffered architecture is mainly designed so that
each DAC Input Register can be written at any time and then
all DAC voltages updated simultaneously by pulling LDAC
LOW. It also allows a DAC Input Register to be written to
at any point and the DAC voltage to be synchronously
changed via a trigger signal connected to LDAC.
A1
A0
R/W
CS
RESET
LDAC
SELECTED
INPUT
REGISTER
L(1)
L
H
H
L
L
H
H
L
L
H
H
X(3)
X
X
L
H
L
H
L
H
L
H
L
H
L
H
X
X
X
L
L
L
L
L
L
L
L
H
H
H
H
X
X
X
L
L
L
L
L
L
L
L
L
L
L
L
H
H
X
H(2)
H
H
H
H
H
H
H
H
H
H
H
H
H
L
L
L
L
L
H
H
H
H
H
H
H
H
L
H
X
A
B
C
D
A
B
C
D
A
B
C
D
NONE
NONE
ALL
STATE OF
SELECTED
INPUT
REGISTER
STATE OF
ALL DAC
REGISTERS
Transparent
Transparent
Transparent
Transparent
Transparent
Transparent
Transparent
Transparent
Readback
Readback
Readback
Readback
(All Latched)
(All Latched)
Reset(4)
Transparent
Transparent
Transparent
Transparent
Latched
Latched
Latched
Latched
Latched
Latched
Latched
Latched
Transparent
Latched
Reset(4)
NOTES: (1) L = Logic LOW. (2) H= Logic HIGH. (3) X = Don’t Care. (4) DAC7624 resets to 800H, DAC7625 resets to 000H. When RESET rises, all registers that
are in their latched state retain the reset value.
TABLE I. DAC7624 and DAC7625 Control Logic Truth Table.
®
DAC7624/7625
10
DIGITAL TIMING
DIGITAL INPUT CODING
Figure 3 and Table II provide detailed timing for the digital
interface of the DAC7624 and DAC7625.
The DAC7624 and DAC7625 input data is in straight binary
format. The output voltage is given by the following equation:
– V REFL ) • N
(V
V OUT = V REFL + REFH
4096
where N is the digital input code. This equation does not
include the effects of offset (zero-scale) or gain (full-scale)
errors.
tWCS
CS
tWH
tAS
tAH
tLS
tLH
R/W
tRCS
CS
tRDH
tRDS
tWS
A0/A1
R/W
tAH
tAS
LDAC
A0/A1
tDH
tDS
tDZ
Data Out
tLWD
Data In
Data Valid
tRESET
tCSD
RESET
Digital Input Timing
Data Output Timing
FIGURE 3. Digital Input and Output Timing.
SYMBOL
DESCRIPTION
MIN
tRCS
tRDS
tRDH
tDZ
tCSD
tWCS
tWS
tWH
tAS
t AH
tLS
t LH
t DS
tDH
tLWD
CS LOW for Read
R/W HIGH to CS LOW
R/W HIGH after CS HIGH
CS HIGH to Data Bus in High Impedance
CS LOW to Data Bus Valid
CS LOW for Write
R/W LOW to CS LOW
R/W LOW after CS HIGH
Address Valid to CS LOW
Address Valid after CS HIGH
LDAC LOW to CS LOW
LDAC LOW after CS HIGH
Data Valid to CS LOW
Data Valid after CS HIGH
LDAC LOW
RESET LOW
200
10
0
tRESET
TYP
100
100
MAX
160
50
0
0
0
0
70
50
0
0
50
50
UNITS
ns
ns
ns
ns
ns
ns
ns
ns
ns
ns
ns
ns
ns
ns
ns
ns
TABLE II. Timing Specifications (TA = –40°C to +85°C).
®
11
DAC7624/7625
Similar pages