Rectron DB105LS Single-phase glass passivated silicon bridge rectifier voltage range 50 to 1000 volts current 1.0 ampere Datasheet

DB101LS
THRU
DB107LS
SINGLE-PHASE GLASS PASSIVATED
SILICON BRIDGE RECTIFIER
VOLTAGE RANGE 50 to 1000 Volts CURRENT 1.0 Ampere
FEATURES
*
*
*
*
*
*
*
*
Good for automation insertion
Surge overload rating - 30 amperes peak
Ideal for printed circuit board
Reliable low cost construction utilizing molded
Glass passivated device
Polarity symbols molded on body
Mounting position: Any
Weight: 1.0 gram
DB-LS
.310 (7.9)
.290 (7.4)
MECHANICAL DATA
.255 (6.5)
.245 (6.2)
* Epoxy: Device has UL flammability classification 94V-O
.009
(0.229)
.013 (.330)
.003 (.076)
.410 (10.4)
.360 (9.4)
.042 (1.1)
.038 (1.0)
.060 (1.524)
.040 (1.016)
.346 (8.8)
0.100 (2.55)
.307 (7.8)
0.089 (2.25)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25 o C ambient temperature unless otherwise specified.
.205 (5.2)
Single phase, half wave, 60 Hz, resistive or inductive load.
.195 (5.0)
For capacitive load, derate current by 20%.
Dimensions in inches and (millimeters)
MAXIMUM RATINGS (At T A = 25oC unless otherwise noted)
RATINGS
SYMBOL
DB101LS DB102LS DB103LS DB104LS DB105LS DB106LS DB107LS UNITS
Maximum Recurrent Peak Reverse Voltage
VRRM
50
Maximum RMS Bridge Input Voltage
VRMS
Maximum DC Blocking Voltage
VDC
Maximum Average Forward Output Current at T A = 40 oC
Peak Forward Surge Current 8.3 ms single half sine-wave
superimposed on rated load (JEDEC method)
Typical Thermal Resistance (Note 2)
Operating and Storage Temperature Range
100
200
400
600
35
70
140
280
420
50
100
200
400
600
800
1000
Volts
560
700
Volts
800
1000
Volts
IO
1.0
Amps
I FSM
30
Amps
R qJA
40
RqJL
15
T J, T STG
-55 to + 150
0
C/W
0
C
o
ELECTRICAL CHARACTERISTICS (At TA = 25 C unless otherwise noted)
CHARACTERISTICS
SYMBOL
Maximum Forward Voltage Drop per Bridge
VF
Element at 1.0A DC
o
Maximum Reverse Current at Rated
@T A = 25 C
DC Blocking Voltage per element
@T A = 125 o C
Note: 1.”Fully ROHS compliant”,”100% Sn plating(Pb-free).
2. Thermal Resistance: Mounted on PCB.
IR
DB101LS DB102LS DB103LS DB104LS DB105LS DB106LS DB107LS UNITS
1.1
Volts
5.0
uAmps
0.5
mAmps
2007-08
60
8.3mS Single Half Sine-Wave
JEDEC Method
50
40
30
20
10
0
0
2
4
6
10
20
40
60
100
INSTANTANEOUS FORWARD CURRENT, (A)
PEAK FORWARD SURGE CURRENT, (A)
RATING AND CHARACTERISTICS CURVES ( DB101LS THRU DB107LS )
10
1
0.1
0.01
T J = 25 OC
Pulse Width = 300mS
1% Duty Cycle
0
100
FIG. 1 - MAXIMUM NON-REPETITIVE
FORWARD SURGE CURRENT
1.5
TA = 25 OC
10
1.0
0.1
0
20
40
60
80
100
0.5
1.0
1.5
2.0
2.5
INSTANTANEOUS FORWARD VOLTAGE, (V)
AVERAGE FORWARD CURRENT, (A)
INSTANTANEOUS REVERSE CURRENT, (mA)
NUMBER OF CYCLES AT 60Hz
120
140
PERCENT RATED PEAK REVERSE VOLTAGE, (%)
FIG.3 TYPICAL REVERSE CHARACTERISTICS
FIG.2 TYPICAL INSTANTANEOUS
FORWARD CHARACTERISTICS
1.0
0.5
60 Hz RESISTIVE OR
INDUCTIVE LOAD
0
20
40
60
80
100
120
140 150
AMBIENT TEMPERATURE, (OC)
FIG.4 TYPICAL FORWARD CURRENT
DERATING CURVE
Mounting Pad Layout
.410 Max.
(10.4 Max.)
.205 (5.2)
.195 (5.0)
.042 Min.
(1.10 Min.)
Dimensions in inches and (millimeters)
.060 Min.
(1.52 Min.)
DISCLAIMER NOTICE
Rectron Inc reserves the right to make changes without notice to any product
specification herein, to make corrections, modifications, enhancements or other
changes. Rectron Inc or anyone on its behalf assumes no responsibility or liability for any errors or inaccuracies. Data sheet specifications and its information
contained are intended to provide a product description only. "Typical" parameters which may be included on RECTRON data sheets and/ or specifications can and do vary in different applications and actual performance may vary over time. Rectron Inc does not assume any liability arising out of the application or
use of any product or circuit.
Rectron products are not designed, intended or authorized for use in medical,
life-saving implant or other applications intended for life-sustaining or other related applications where a failure or malfunction of component or circuitry may directly or indirectly cause injury or threaten a life without expressed written approval of Rectron Inc. Customers using or selling Rectron components for use in
such applications do so at their own risk and shall agree to fully indemnify Rectron Inc and its subsidiaries harmless against all claims, damages and expenditures.
Similar pages