Powerbox DCS55-55E 1000-3000 watts programmable dc supply Datasheet

LABORATORY
DCS Series
1000-3000 WATTS PROGRAMMABLE DC SUPPLY
Features
•
•
•
•
•
High power density
Remote voltage sense & remote programming
Wide range of output voltages
High programming resolution with ethernet
interface
Remote control
Specifications
OPERATING
INPUT
Input voltage
1KW: 200-250VAC, single phase; 100-132VAC
single phase, internal jumper selectable (see M1
option) 1.2KW: 200-250VAC, single phase; 100132VAC single phase, internal jumper selectable
(see M1 option) 3KW: 190-250VAC, three phase;
200-250VAC, single phase (Note: Max.power
output of 3KW supplies must be limited to 2.5KW
for single phase input)
Frequency
47-63Hz for both single and three phase input
Current
1KW: 15A typ at 115VAC, 8A typ at 230VAC,
1.2KW: 18A typ at 115VAC, 9A typ at 230VAC,
3KW: 20A typ at 230VAC single phase, 14A typ at
230VAC three phase
Soft start
Efficiency
See table
Remote sense
The maximum allowed sense line drop is 4V per line
(2V on the DCS 8 and 10V 1KW and 1.2KW models
and 1V/ line for all 3KW models)
Remote programming
External jumper via rear panel connectors J3.
Overvoltage protection
Crowbar type adjustable from 5-110% Protection
rated output using front panel control (local or
remote program selectable via J3 jumper)
Remote analog
programming
Linearity: +/-1%
Accuracy: +/-5%
Software
LabVIEW® driver for M9C/M85 (Contact Powerbox)
Regulatory compliance
CE Mark on all models, FCC Part 15 Class A UL1012
and CSA 22.2 #220 (1 and 1.2 KW only)
Line current is lower than full load peak value
during turn-on or power application after restart
ENVIRONMENTAL
Options and Accessories
Operating temperature
0°C to 50° (No De-rating)
Storage temperature
-40°C to 85°C
Humidity range
0-80% RH, non condensing
REMOTE INTERFACE OPTIONS
Cooling
Internal fan with over-temperature protection
M9C
Internal IEEE-488/RS 232 interface
M13
Locking shafts (front panel potentiometers)
M32
Master/slave cable configured for two or more units
M33
M51A
Replace input connector with terminal block (3kW only)
Isolated analog programming control of
V/I/OVP and isolated V/I monitor outputs up to
500V relative to the supply’s return line
Multichannel slave interface
Front panel binding posts for 1kw or 1.2
kW, Models 30A, 100V. Not compatible with
M9C, M85, M130, M131, M133, M135, M136
LXI compliant 10/100 Base T Ethernet
remote control master interface; includes web
server for direct control of power supply via web
browser (MS Internet Explorer 6.0 or later)
OUTPUT
Voltage adjustment
Zero to rated output
Current adjustment
Zero to rated output
Ripple & Noise
See table
Regulation (Line or Load)
Voltage: 0.1% Current: 0.1%
Transient response
Typically recovers in < 1ms to 1% of steady-state
output voltage (within 1% of Vmax) for 70-100%
or 100-70% load change. 500s typical
Stability
+/-0.05% of maximum voltage or current over 8
hours after 30 minute warm-up time at fixed line,
load and temperature
Temperature Coefficient
0.02%/°C of maximum output voltage 0.03%/°C of
maximum output current
INPUT VOLTAGE OPTIONS
M1
M85
M102
M130
M131
M135
16-bit slave interface option for use with a
M130 master (3 ft. control cable included)
Output disconnect and polarity reversal
controlled via SCPI commands. Limited to 1k or
1.2 kW, 300V, 60A
M130 & M133 combination
M136
M131 & M133 combination
105-330-26
Rack slide kit (3kW)
M133
484
Factory configured for 115VAC input (1 and 1.2kW only)
LABORATORY
DCS Series
1000-3000 WATTS PROGRAMMABLE DC SUPPLY
CONSTANT CURRENT MODE*
MODEL
COMBINED
REGULATION LINE
AND LOAD %
RIPPLE
(RMS)
TEMP.
COEFF.
VOLTAGE
%/°C
(TYP)
PROGRAMMING
INPUT CURRENT, A
CASE
VOLTAGE CONSTANTS CURRENT
NORMAL
MODE
DRIFT % %
EFFICIENCY
IO MAX
230V
208V
% (TYP)
SINGLE
THREE
OHMS/A
V/A
(TYP)
PHASE
PHASE
DCS 8-140E
0.2
180
0.03
0.05
DCS 10-120E
0.2
153
0.03
0.05
DCS 20-60E
0.2
30
0.03
0.05
DCS 33-36E
0.2
11
0.03
0.05
DCS 40-30E
0.2
9
0.03
0.05
DCS 50-24E
0.2
8.5
0.03
0.05
DCS 60-20E
0.2
6.6
0.03
0.05
DCS 80-15E
0.2
6
0.03
0.05
DCS 100-12E
0.2
3.6
0.03
0.05
DCS 150-8E
0.2
2.3
0.03
0.05
DCS 300-4E
0.2
1.2
0.03
0.05
* Typical resolution is 0.02% **RMS ripple from 20Hz to 300kHz ***Consult factory
Dimension: 1RU or 44mm (H) x 482mm (W) x 444mm (D) ; Weight: 8.6kg86
35.7
41.7
83.3
138.9
166.7
208.3
250
333.3
416.7
625
1250
9
9
9
9
9
9
9
9
9
9
9
0-10V= 0-100%
Io
or
0-5V= 0-100%
Io
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
82
82
82
84
84
84
85
85
85
85
85
I
I
I
I
I
I
I
I
I
I
I
DSC 3kW Series
TEMP.
COMBINED CONSTANT VOLTAGE MODE* COEFF. VOLTAGE
REGULATION
DRIFT %
CURRENT
RIPPLE NOISE TRANSIENT VOLTAGE
LINE AND
VMAX
VOLTAGE
ADC @
(RMS)**
(P-P) RESPONSE
%/°C
LOAD %
(TYP)
VDC
50°C
(TYP.)
(TYP) TIME (TYP)
(TYP)
OUTPUT POWER
MODEL
DCS 8-350E
DCS 12-250E
DCS 20-150E
DCS 40-75E
DCS 55-55E
DCS 60-50E
DCS 80-37E
DCS 150-20E
0-8
0-12
0-20
0-40
0-55
0-60
0-80
0-150
0-350
0-250
0-150
0-75
0-55
0-50
0-37
0-20
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
15mV
10mV
10mV
20mV
20mV
20mV
20mV
30mV
100mV
100mV
100mV
100mV
100mV
100mV
100mV
200mV
1000␮s
1000␮s
1000␮s
1000␮s
1000␮s
1000␮s
1000␮s
1000␮s
0.02
0.02
0.02
0.02
0.02
0.02
0.02
0.02
PROGRAMMING
TEMP.
VOLTAGE CONSTANTS CURRENT
COEFF.
MODE
DRIFT % %
VOLTAGE I MAX
O
RIPPLE
%/°C
OHMS/A
V/A
(TYP)
(RMS)
(TYP)
CONSTANT CURRENT MODE*
MODEL
COMBINED
REGULATION LINE
AND LOAD %
DCS 8-350E
0.2
870
0.03
0.05
DCS 12-250E
0.2
400
0.03
0.05
DCS 20-150E
0.2
100
0.03
0.05
DCS 40-75E
0.2
75
0.03
0.05
DCS 55-55E
0.2
40
0.03
0.05
DCS 60-50E
0.2
33
0.03
0.05
DCS 80-37E
0.2
20
0.03
0.05
DCS 150-20E
0.2
10
0.03
0.05
* Typical resolution is 0.02% **RMS ripple from 20Hz to 300kHz ***Consult factory
Dimension: 2RU or 88mm (H) x 482mm (W) x 444mm (D) ; Weight: 15kg
486
14.7
20
33.3
66.7
90.9
100
135
250
0-10V= 0-100% I0
or
0-5V= 0-100% I0
0.05
0.05
0.05
0.05
0.05
0.05
0.05
0.05
PROGRAMMING CONSTANTS
VOLTAGE MODES
OHMS/V
V/V
625
416.7
250
125
90.9
83
62.5
33.3
0-10V = 0-100% Vo
or
0-5V = 0-100% Vo
INPUT CURRENT, A
NORMAL
230V
SINGLE
PHASE
208V
THREE
PHASE
24
26
26
26
26
26
26
26
13
14
14
14
14
14
14
14
CASE
EFFICIENCY
% (TYP)
82
82
82
86
82
86
86
86
II
II
II
II
II
II
II
II
LABORATORY
DCS Series
1000-3000 WATTS PROGRAMMABLE DC SUPPLY
DSC 1kW Series
OUTPUT POWER
MODEL
DCS 8-125E
DCS 10-100E
DCS 20-50E
DCS 33-33E
DCS 40-25E
DCS 50-20E
DCS 60-18E
DCS 80-13E
DCS 100-10E
DCS 150-7E
DCS 300-3.5E
DCS 600-1.7E
CONSTANT
COMBINED
REGULATION
CURRENT
LINE AND
VOLTAGE
RIPPLE
ADC @
LOAD %
VDC
(RMS)** (TYP.)
50°C
0-8
0-10
0-20
0-33
0-40
0-50
0-60
0-80
0-100
0-150
0-300
0-600
0-125
0-100
0-50
0-33
0-25
0-20
0-18
0-13
0-10
0-7
0-3.5
0-1.7
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
4mV
4mV
4mV
4mV
4mV
4mV
4mV
4mV
6mV
12mV
20mV
50mV
PROGRAMMING CONSTANTS
TEMP.
VOLTAGE MODES
COEFF. VOLTAGE
DRIFT %
NOISE TRANSIENT VOLTAGE
VMAX
(P-P) RESPONSE
OHMS/V
V/V
%/°C
(TYP)
(TYP) TIME (TYP)
(TYP)
VOLTAGE MODE*
60mV
60mV
60mV
60mV
60mV
60mV
60mV
60mV
60mV
160mV
200mV
300mV
500␮s
500␮s
500␮s
500␮s
500␮s
500␮s
500␮s
500␮s
500␮s
500␮s
500␮s
500␮s
0.02
0.02
0.02
0.02
0.02
0.02
0.02
0.02
0.02
0.02
0.02
0.02
PROGRAMMING
TEMP.
VOLTAGE CONSTANTS CURRENT
COEFF.
MODE
DRIFT % %
VOLTAGE
IO MAX
RIPPLE
%/°C
OHMS/A
V/A
(TYP)
(RMS)
(TYP)
CONSTANT CURRENT MODE*
MODEL
COMBINED
REGULATION LINE
AND LOAD %
DCS 8-125E
0.2
160
0.03
0.05
40
DCS 10-100E
0.2
128
0.03
0.05
50
DCS 20-50E
0.2
25
0.03
0.05
100
DCS 33-33E
0.2
10
0.03
0.05
151.5
DCS 40-25E
0.2
7
0.03
0.05
200
DCS 50-20E
0.2
7
0.03
0.05
250
DCS 60-18E
0.2
6
0.03
0.05
277.8
DCS 80-13E
0.2
4
0.03
0.05
384.6
DCS 100-10E
0.2
3
0.03
0.05
500
DCS 150-7E
0.2
2
0.03
0.05
714.3
DCS 300-3.5E
0.2
1
0.03
0.05
1428.6
DCS 600-1.7E
0.2
1
0.03
0.05
2941.2
* Typical resolution is 0.02% **RMS ripple from 20Hz to 300kHz ***Consult factory
Dimension: 1RU or 44mm (H) x 482mm (W) x 444mm (D) ; Weight: 8.6kg
0.05
0.05
0.05
0.05
0.05
0.05
0.05
0.05
0.05
0.05
0.05
0.05
625
500
250
151.5
125
100
83
62.5
50
33.3
16.67
8.33
INPUT CURRENT, A
NORMAL
0-10V= 0-100%
Io or
0-5V= 0-100% Io
0-10V = 0-100%
Vo
or
0-5V = 0-100% Vo
CASE
EFFICIENCY
% (TYP)
230V
SINGLE
PHASE
208V
THREE
PHASE
8
8
8
8
8
8
8
8
8
8
8
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
82
82
82
84
84
84
86
86
86
86
86
I
I
I
I
I
I
I
I
I
I
I
9.5
N/A
86
***
DSC 1.2kW Series
OUTPUT POWER
MODEL
VOLTAGE CURRENT
VDC
ADC @ 50°C
DCS 8-140E
DCS 10-120E
DCS 20-60E
DCS 33-36E
DCS 40-30E
DCS 50-24E
DCS 60-20E
DCS 80-15E
DCS 100-12E
DCS 150-8E
DCS 300-4E
0-8
0-10
0-20
0-33
0-40
0-50
0-60
0-80
0-100
0-150
0-300
0-140
0-120
0-60
0-36
0-30
0-24
0-20
0-15
0-12
0-8
0-4
COMBINED
REGULATION
LINE AND
LOAD %
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
PROGRAMMING CONSTANTS
TEMP.
VOLTAGE MODES
COEFF. VOLTAGE
DRIFT %
VOLTAGE
TRANSIENT
VMAX
%/°C
(TYP)
RESPONSE
OHMS/V
V/V
(TYP)
TIME (TYP)
CONSTANT VOLTAGE MODE*
RIPPLE
(RMS)**
(TYP.)
NOISE
(P-P)
(TYP)
5mV
5mV
5mV
5mV
5mV
5mV
5mV
5mV
10mV
15mV
25mV
60mV
60mV
60mV
60mV
60mV
60mV
60mV
60mV
60mV
160mV
200mV
500␮s
500␮s
500␮s
500␮s
500␮s
500␮s
500␮s
500␮s
500␮s
500␮s
500␮s
0.02
0.02
0.02
0.02
0.02
0.02
0.02
0.02
0.02
0.02
0.02
Your dependable power partner – www.powerbox.com.au
0.05
0.05
0.05
0.05
0.05
0.05
0.05
0.05
0.05
0.05
0.05
625
500
250
151.5
125
100
83
62.5
50
33.3
16.67
0-10V = 0-100% Vo
or
0-5V = 0-100% Vo
485
LABORATORY
DCS Series
1000-3000 WATTS PROGRAMMABLE DC SUPPLY
Options & Accesssories
INPUT VOLTAGE OPTIONS
M1
Factory configured for 115 VAC input (1 and 1.2 kW only)
REMOTE INTERFACE OPTIONS
J3 PROGRAM AND SENSE
1
90-250 VAC Remote Shutdown 14
TTL Shutdown
2
Shutdown Return
15
+12 VDC
M9C
Internal IEEE-488/RS 232 interface (Supports only 12-bit slaves)
M13
Locking shafts (front panel potentiometers)
3
OVP Program
16
1 mACurrent Source (OVP)
M32
Master/slave cable configured for two or more units
4
Remote/Local Status Indicator
17
OVP Indicator
M33
Replace input connector with terminal block(3 kW only)
5
Mode Status Indicator
18
Thermal S/DN Status
M51A
Isolated analog programming control
6
Ground
19
0-5V Voltage Monitor
M102
Front Panel Binding Posts (1 kW and 1.2 kW only?30A)
M85
12-bit slave interface
7
0-5V Current Monitor
20
Remote Voltage Select
Voltage Control
21
1 mA Current Source (V)
M130
Ethernet/RS232 Interface (Supports both 12- & 16-bit slaves)
8
M131
16-bit slave interface
9
Voltage Program Input
22
1 mA Current Source (I)
M133
Output disconnect and polarity reversal relays*
10
Current Program Unit
23
Remote Current Select
M135
Output disconnect and polarity reversal relays**
11
Current Control
24
Return
M136
Output disconnect and polarity reversal relays***
12
Return Sense
25
POS Output (8-100V Models Only)
13
POS Sense (8-100V Models Only
105-330-26 Rack slide kit (3 kW only)
* Requires M9C ** Includes option M130 ***Includes option M131
Technical Illustrations
1KW AND 1.2KW
3KW
Your dependable power partner – www.powerbox.com.au
487
Similar pages