WTE DD201S 20a 8.4mm/9.5mm dish diode Datasheet

DD200/S – DD206/S
WTE
POWER SEMICONDUCTORS
20A 8.4mm/9.5mm DISH DIODE
Features
!
Glass Passivated Die Construction
!
!
!
!
!
Low Leakage
Low Cost
High Surge Current Capability
Low Forward
C-Band Terminal Construction
C
D
Mechanical Data
B
!
!
!
!
!
Case: All Copper Case and Components
Hermetically Sealed
Terminals: Contact Areas Readily Solderable
Polarity: Cathode to Case(Reverse Units Are
Available Upon Request and Are Designated
By An “R” Suffix, i.e. DD202R or DD204SR)
Polarity: Red Color Equals Standard,
Black Color Equals Reverse Polarity
Mounting Position: Any
A
Dim
A
B
C
D
8.4mm Dish
9.5mm Dish
Min
Max
Min
Max
8.35
8.45
9.50
9.72
2.0
2.16
2.0
2.16
1.43
1.47
1.43
1.47
22.3
—
22.3
—
All Dimensions in mm
“S” Suffix Designates 8.4mm Dish
No Suffix Designates 9.5mm Dish
Maximum Ratings and Electrical Characteristics
@TA=25°C unless otherwise specified
Single Phase, half wave, 60Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
Characteristic
Symbol
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
RMS Reverse Voltage
Average Rectified Output Current @TA = 150°C
DD200/ DD201/ DD202/ DD203/ DD204/ DD205/ DD206/
S
S
S
S
S
S
S
Unit
VRRM
VRWM
VR
50
100
200
300
400
500
600
V
VR(RMS)
35
70
140
210
280
350
420
V
IO
20
A
Non-Repetitive Peak Forward Surge Current
8.3ms Single half sine-wave superimposed on
rated load (JEDEC Method)
IFSM
400
A
Forward Voltage
@IF = 20A
VFM
1.1
V
Peak Reverse Current
At Rated DC Blocking Voltage
@TA = 25°C
@TA = 100°C
IRM
100
500
µA
Cj
300
pF
RJC
1.0
K/W
TJ, TSTG
-65 to +175
°C
Typical Junction Capacitance (Note 1)
Typical Thermal Resistance Junction to Case
(Note 2)
Operating and Storage Temperature Range
Note: 1. Measured at 1.0 MHz and applied reverse voltage of 4.0V D.C.
2. Thermal Resistance: Junction to case, single side cooled.
DD200/S – DD206/S
1 of 2
© 2002 Won-Top Electronics
ORDERING INFORMATION
Product No.
Package Type
Shipping Quantity
DD200
Press Fit
200 Units/Tray
DD200S
Press Fit
200 Units/Tray
DD201
Press Fit
200 Units/Tray
DD201S
Press Fit
200 Units/Tray
DD202
Press Fit
200 Units/Tray
DD202S
Press Fit
200 Units/Tray
DD203
Press Fit
200 Units/Tray
DD203S
Press Fit
200 Units/Tray
DD204
Press Fit
200 Units/Tray
DD204S
Press Fit
200 Units/Tray
DD205
Press Fit
200 Units/Tray
DD205S
Press Fit
200 Units/Tray
DD206
Press Fit
200 Units/Tray
DD206S
Press Fit
200 Units/Tray
Shipping quantity given is for minimum packing quantity only. For minimum order
quantity, please consult the Sales Department.
Won-Top Electronics Co., Ltd (WTE) has checked all information carefully and believes it to be correct and accurate. However, WTE cannot assume any
responsibility for inaccuracies. Furthermore, this information does not give the purchaser of semiconductor devices any license under patent rights to
manufacturer. WTE reserves the right to change any or all information herein without further notice.
WARNING: DO NOT USE IN LIFE SUPPORT EQUIPMENT. WTE power semiconductor products are not authorized for use as critical components in life
support devices or systems without the express written approval.
Won-Top Electronics Co., Ltd.
No. 44 Yu Kang North 3rd Road, Chine Chen Dist., Kaohsiung, Taiwan
Phone: 886-7-822-5408 or 886-7-822-5410
Fax: 886-7-822-5417
Email: [email protected]
Internet: http://www.wontop.com
DD200/S – DD206/S
We power your everyday.
2 of 2
© 2002 Won-Top Electronics
Similar pages