WTE DD301S 30a 8.4mm/9.5mm dish diode Datasheet

DD300/S – DD306/S
WTE
POWER SEMICONDUCTORS
30A 8.4mm/9.5mm DISH DIODE
Features
!
Glass Passivated Die Construction
!
!
!
!
!
Low Leakage
Low Cost
High Surge Current Capability
Low Forward
C-Band Terminal Construction
C
D
Mechanical Data
B
!
!
!
!
!
Case: All Copper Case and Components
Hermetically Sealed
Terminals: Contact Areas Readily Solderable
Polarity: Cathode to Case(Reverse Units Are
Available Upon Request and Are Designated
By An “R” Suffix, i.e. DD302R or DD304SR)
Polarity: Red Color Equals Standard,
Black Color Equals Reverse Polarity
Mounting Position: Any
A
Dim
A
B
C
D
8.4mm Dish
9.5mm Dish
Min
Max
Min
Max
8.35
8.45
9.50
9.72
2.0
2.16
2.0
2.16
1.43
1.47
1.43
1.47
22.3
—
22.3
—
All Dimensions in mm
“S” Suffix Designates 8.4mm Dish
No Suffix Designates 9.5mm Dish
Maximum Ratings and Electrical Characteristics
@TA=25°C unless otherwise specified
Single Phase, half wave, 60Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
Characteristic
Symbol
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
RMS Reverse Voltage
Average Rectified Output Current @TA = 150°C
DD300/ DD301/ DD302/ DD303/ DD304/ DD305/ DD306/
S
S
S
S
S
S
S
Unit
VRRM
VRWM
VR
50
100
200
300
400
500
600
V
VR(RMS)
35
70
140
210
280
350
420
V
IO
30
A
Non-Repetitive Peak Forward Surge Current
8.3ms Single half sine-wave superimposed on
rated load (JEDEC Method)
IFSM
400
A
Forward Voltage
@IF = 30A
VFM
1.1
V
Peak Reverse Current
At Rated DC Blocking Voltage
@TA = 25°C
@TA = 100°C
IRM
100
500
µA
Cj
300
pF
RJC
1.0
K/W
TJ, TSTG
-65 to +175
°C
Typical Junction Capacitance (Note 1)
Typical Thermal Resistance Junction to Case
(Note 2)
Operating and Storage Temperature Range
Note: 1. Measured at 1.0 MHz and applied reverse voltage of 4.0V D.C.
2. Thermal Resistance: Junction to case, single side cooled.
DD300/S – DD306/S
1 of 2
© 2002 Won-Top Electronics
ORDERING INFORMATION
Product No.
Package Type
Shipping Quantity
DD300
Press Fit
200 Units/Tray
DD300S
Press Fit
200 Units/Tray
DD301
Press Fit
200 Units/Tray
DD301S
Press Fit
200 Units/Tray
DD302
Press Fit
200 Units/Tray
DD302S
Press Fit
200 Units/Tray
DD303
Press Fit
200 Units/Tray
DD303S
Press Fit
200 Units/Tray
DD304
Press Fit
200 Units/Tray
DD304S
Press Fit
200 Units/Tray
DD305
Press Fit
200 Units/Tray
DD305S
Press Fit
200 Units/Tray
DD306
Press Fit
200 Units/Tray
DD306S
Press Fit
200 Units/Tray
Shipping quantity given is for minimum packing quantity only. For minimum order
quantity, please consult the Sales Department.
Won-Top Electronics Co., Ltd (WTE) has checked all information carefully and believes it to be correct and accurate. However, WTE cannot assume any
responsibility for inaccuracies. Furthermore, this information does not give the purchaser of semiconductor devices any license under patent rights to
manufacturer. WTE reserves the right to change any or all information herein without further notice.
WARNING: DO NOT USE IN LIFE SUPPORT EQUIPMENT. WTE power semiconductor products are not authorized for use as critical components in life
support devices or systems without the express written approval.
Won-Top Electronics Co., Ltd.
No. 44 Yu Kang North 3rd Road, Chine Chen Dist., Kaohsiung, Taiwan
Phone: 886-7-822-5408 or 886-7-822-5410
Fax: 886-7-822-5417
Email: [email protected]
Internet: http://www.wontop.com
DD300/S – DD306/S
We power your everyday.
2 of 2
© 2002 Won-Top Electronics
Similar pages