DIODE MODULE DD40F/KD40F UL;E76102 （M） Power Diode Module DD40F series are designed for various rectifier circuits. DD40F has two diode chips connected in series in 25mm (1inch) width package and the mounting base is elctrically isolated from elements for simple heatsink construction. Wide voltage rating up to, 1,600V is avaiable for various input voltage. 2- 6 92 20 20 ● Isolated 25 12.5 12 mounting base elements in a package for simple (single and three phase) bridge connections ● Highly reliable glass passivated chips ● High surge current capability 20 ● Two DD ３ ２ １ 6.5 31max 19.5 4.0 （Applications） Various rectifiers, Battery chargers, DC motor drives M5X10 80±0.2 ２ ３ １ KD Unit：a ■Maximum Ratings Symbol （Tj＝25℃ unless otherwise specified） Item Ratings DD40F40 DD40F80 DD40F120 DD40F160 Unit VRRM Repetitive Peak Reverse Voltage 400 800 1200 1600 V VRSM Non-Repetitive Peak Reverse Voltage 480 960 1300 1700 V Symbol Item Ratings Unit Conditions IF（AV） Average Forward Current Single phase, half wave, 180°conduction, Tc：96℃ 40 A IF (RMS) R.M.S. Forward Current Single phase, half wave, 180°conduction, Tc：96℃ 62 A Surge Forward Current 1 ／2 cycle, I2t Value for one cycle of surge current IFSM I2t VISO 50/60HZ, peak Value, non-repetitive Isolation Breakdown Voltage（R.M.S.） A.C.1minute Tj Junction Temperature Tstg Storage Temperature Mounting Torque A 1200/1300 7200 A2S 2500 ℃ −40 to ＋125 ℃ −40 to ＋125 V Mounting（M5） Recommended Value 1.5-2.5（15-25） 2.7（28） Terminal（M5） Recommended Value 1.5-2.5（15-25） 2.7（28） N･m （㎏f･B） 170 g Ratings Unit 15 mA Mass ■Electrical Characteristics Symbol Item IRRM Repetitive Peak Reverse Current, max. at VDRM, single phase, half wave. Tj＝125℃ VFM Forward Voltage Drop, max. Forward current 120A，Tj＝25℃，Inst. measurement 1.40 V Junction to case 0.55 ℃/W Rth（j-c） Thermal Impedance, max. SanRex Conditions ® 50 Seaview Blvd. Port Washington, NY 11050-4618 PH.(516)625-1313 FAX(516)625-8845 E-mail: [email protected] DD40F/KD40F ８０ Power Dissipation Pav（W） １０3 Maximum Forward Characteristics Forward Current（A） ５ ２ １０2 ５ ２ 1 １０ １３０ １ ２ ３ ４ Per one element ７０ D.C. ６０ Single Phase Three Phase ５０ ４０ Max. ３０ ２０ １０ ０ ０ ５ １０ ２０ ３０ ６０ ７０ ８０ Average Forward Current vs. Allowable Case Temperature Cycle Surge Forward Current Rating （Non-Repetitive） １６００ Per one element Per one element Ｔ ｊ=２５℃ start １２００ １１０ ８０ 7０ D.C. Three Phase ９０ Single Phase １００ ６０ ５０ ０ １０ ２０ ３０ ４０ ５０ ６０ ７０ ８００ 60Hz 50Hz ４００ ０ ０ １０ ８０ ２ １０1 ５ ２ １０2 ５ Time（Cycles） Average Forward Current（A） Transient Thermal Impedance Per one element ０． ９ ０． ８ Junction to Case ０． ７ ０． ６ ０． ５ ０． ４ ０． ３ ０． ２ ０． １ １０-１ １００ １０1 Time t（sec） Output Current １０2 １０3 B２；Two Pluse Bridge connection Rth:1.0℃/W Rth:0.8℃/W Rth:0.6℃/W Rth:0.4℃/W Rth:0.2℃/W Rth:0.1℃/W ３００ ２００ １０4 ９０ B2 Id（Av） １００ １１０ １００ ０ ０ ２０ ４０ ６０ ８０ １００ ０ Output Current（A） ４０ ８０ １２０ Ambient Temperature（℃） １２０ １２５ ４００ Output Current B６；Six pulse Bridge connection ９０ Rth:0.8℃/W Rth:0.6℃/W Rth:0.4℃/W Rth:0.2℃/W Rth:0.1℃/W ３００ B6 ２００ １００ Id(AV) １１０ １００ １２０ ０ ０ ２０ ４０ ６０ ８０ １００ ０ ４０ ８０ １２０ １２５ Allowable Case Temperature（℃） Total Power Dissipation（W） ４００ １０-２ Total Power Dissipation（W） ０ -３ １０ Allowable Case Temperature（℃） Transient Thermal Impedance θj-c（℃/W） ５０ Average Forward Current（A） １２０ １． ０ ４０ Forward Voltage Drop（V） Surge Forward Current（A） Allowable Case Temperature Tc（℃） ５ ０ Average Forward Current vs. Power Dissipation Output Current（A） Ambient Temperature（℃） SanRex 50 Seaview Blvd. Port Washington, NY 11050-4618 PH.(516)625-1313 FAX(516)625-8845 E-mail: [email protected]