DOMINANT DDG-GJS-K1 Led gap Datasheet

DOMINANT Semiconductors
DomiLED – GaP : DDx-GJS-I1
•
Low current surface mount LED.
•
120° viewing angle.
•
Small package outline (LxWxH) of 3.2 x 2.8 x 1.8 mm.
•
Qualified according to JEDEC moisture sensitivity Level 2.
•
Compatible to both IR reflow soldering and TTW soldering.
30/04/04
DomiLED Gap DDx-GJS -I1 Catalogue-v3.doc
Page 1 of 1
DOMINANT Semiconductors
Part Ordering Number
Chip Technology /
Color
DDR-GJS-J2L1-1-I1
GaP /
•
•
•
DDR-GJS-J2
DDR-GJS-K1
DDR-GJS-K2
•
DDR-GJS-L1
DDO-GJS-H2K1-1-I1
•
•
•
DDO-GJS-H2
DDO-GJS-J1
DDO-GJS-J2
•
DDO-GJS-K1
DDY-GJS- H2K1-1-I1
•
•
•
DDY-GJS-H2
DDY-GJS-J1
DDY-GJS-J2
•
DDY-GJS-K1
DDG-GJS- KL2-1-I1
•
•
•
DDG-GJS-K1
DDG-GJS-K2
DDG-GJS-L1
•
DDG-GJS-L2
DDP-GJS-GH2-1-I1
•
•
•
DDP-GJS-G1
DDP-GJS-G2
DDP-GJS-H1
•
DDP-GJS-H2
Luminous Intensity @ If = 10mA
Iv ( mcd )
Red, 625 nm
GaP /
Orange, 605 nm
GaP /
Yellow, 587 nm
GaP /
Green, 570 nm
GaP /
5.6 … 14.0
5.6 … 7.2
7.2 … 9.0
9.0 … 11.2
11.2 … 14.0
3.55 … 9.0
3.55
4.5
5.6
7.2
… 4.5
… 5.6
… 7.2
… 9.0
3.55 … 9.0
3.55
4.5
5.6
7.2
… 4.5
… 5.6
… 7.2
… 9.0
7.2 … 18.0
7.2 … 9.0
9.0 … 11.2
11.2 … 14.0
14.0 … 18.0
1.80 … 4.50
Green, 560 nm
1.80 … 2.24
2.24 … 2.80
2.80 … 3.55
3.55 … 4.50
NOTE:
1. All part number above comes in a quantity of 2000 units per reel.
2. Luminous intensity is measured with an accuracy of ±11%.
3. Wavelength binning is carried for all units as per the wavelength-binning table. Only one
wavelength group is allowed for each reel.
30/04/04
DomiLED Gap DDx-GJS -I1 Catalogue-v3.doc
Page 2 of 2
DOMINANT Semiconductors
Characteristics.
Forward voltage
Chip Type
@ If=10 mA.
Viewing angle Max reverse current, IR
at 50% Iv
2.05 V (typ.); 2.45 V (max)
GaP
@ VR = 5V.
120°
100 μA
All forward voltages are measured using a current pulse of 1 ms and has an accuracy of ±0.1 V.
Wavelength Grouping.
Color
Group
Wavelength distribution (nm)
DDR; Red
Full
620 – 635
DDO; Orange
Full
600 – 612
W
600 - 603
X
603 - 606
Y
606 - 609
Z
609 - 612
Full
582 – 594
W
582 – 585
X
585 – 588
Y
588 - 591
Z
591 - 594
Full
564.5 – 576.5
W
564.5 – 567.5
X
567.5 – 570.5
Y
570.5 – 573.5
Z
573.5 – 576.5
Full
552.5 – 564.5
W
552.5 – 555.5
X
555.5 – 558.5
Y
558.5 – 561.5
Z
561.5 – 564.5
DDY; Yellow
DDG; Green
DDP; Pure Green
Dominant wavelength is measured with an accuracy of ±1 nm.
30/04/04
DomiLED Gap DDx-GJS -I1 Catalogue-v3.doc
Page 3 of 3
DOMINANT Semiconductors
Absolute Maximum Ratings.
Maximum Value
Unit
DC forward current.
30
mA
Peak pulse current; (tp ≤ 10 μs, Duty cycle = 0.005)
500
mA
Reverse voltage.
5
V
100
°C
Operating temperature.
-40 … +100
°C
Storage temperature.
-40 … +100
°C
LED junction temperature.
Power dissipation ( at room temperature )
75
mW
Recommended Solder Pad
30/04/04
DomiLED Gap DDx-GJS -I1 Catalogue-v3.doc
Page 4 of 4
DOMINANT Semiconductors
Forward current vs. forward voltage.
4.0
35
3.5
30
Forward Current (mA)
Relative intensity. Normalized at 10 mA.
Relative luminous intensity vs. forward current.
3.0
2.5
2.0
1.5
1.0
25
20
15
10
5
0.5
0
0.0
0
5
10
15
20
25
30
1.0 1.2 1.4 1.6 1.8 2.0 2.2 2.4 2.6
35
Forward Voltage (V)
Forward Current (mA)
Maximum forward current vs. temperature.
Radiation pattern.
30°
20°
10°
0°
1.0
40°
0.8
35
30
50°
0.6
60°
0.4
Forward Current, If
25
20
15
10
70°
0.2
80°
5
0
0
10
20
0
90°
30/04/04
30
40
50
60
70
80
90
Ambient Temperature
DomiLED Gap DDx-GJS -I1 Catalogue-v3.doc
Page 5 of 5
100
DOMINANT Semiconductors
Taping And Orientation.
Reels come in quantity of 2000 units.
Reel diameter is 180 mm .
30/04/04
DomiLED Gap DDx-GJS -I1 Catalogue-v3.doc
Page 6 of 6
DOMINANT Semiconductors
Recommended Sn-Pb IR-Reflow Soldering Profile.
Classification Reflow Profile (JEDEC J-STD-020C)
275
250
o
235-240 C
10-30s
Temperature (oC)
225
Ramp-up
3 oC/sec max.
200
183 oC
175
60-150s
150
125
Ramp-down
o
6 C/sec max.
100
Preheat
60-120s
75
50
360s max
25
0
50
100
150
200
Time (sec)
Recommended Pb Free IR-Reflow Soldering Profile.
Classification Reflow Profile (JEDEC J-STD-020C)
300
275
Temperature ( oC)
250
Ramp-up
3 oC/sec max.
217 oC
225
260-255oC
10-30s
200
60-150s
175
150
125
Ramp-down
6 oC/sec max.
100
Preheat
60-180s
75
50
480s max
25
0
50
100
150
200
Time (sec)
30/04/04
DomiLED Gap DDx-GJS -I1 Catalogue-v3.doc
Page 7 of 7
DOMINANT Semiconductors
NOTE.
All the information published is considered to be reliable. However, DOMINANT
Semiconductors does not assume any liability arising out of the application or use of any
product described herein.
DOMINANT Semiconductors reserves the right to make changes at any time without notice
to any products in order to improve reliability, function or design.
DOMINANT Semiconductors products are not authorized for use as critical components in
life support devices or systems without the express written approval from the managing
director of DOMINANT Semiconductors.
30/04/04
DomiLED Gap DDx-GJS -I1 Catalogue-v3.doc
Page 8 of 8
Similar pages