Hirose DF1-13S-2.5R26 2.5mm pitch connector for discrete wire connection Datasheet

2.5mm Pitch Connector for Discrete Wire Connection
DF1 Series
■Features
1. Board Mounting Height (Crimping Type)
10mm 2.5mm pitch connector achieves the low profile.
2. Insulation Displacement Area Protected by Protector (ID Type)
The connector is structured to protect the insulation displacement connection area by the protector. Therefore, the connector
has a strong tensile strength against the cable and prevents dusts.
3. Easy Connection by Easy Tool (ID Type)
No expensive insulation displacement machine is needed. The connection can be established only by mating the cable into the protector
and fastening it with the ID tool.
4. Intermediate Connection Possible (ID Type)
For intermediate connection, the connector allows signal extraction during cabling.
[Intermediate Connection]
■Applications
FA equipment, measurement equipment
B146
■Product Specifications
Current rating
Rating
Cable Size
(Note1)
Voltage rating
AWG 24 : 3A
Operating Temperature Range
-30 to +85ç (Note2)
AWG 26 : 2A
Operating Moisture Range
-40 to 80%
AWG 28 : 1A
Storage Temperature Range
-10 to +60ç (Note3)
Storage Moisture Range
-40 to 70% (Note3)
250V AC
Item
Specification
Condition
1. Insulation Resistance
1000M ohms Min
500V DC
2. Withstanding voltage
No flashover or insulation breakdown.
650V AC/1 minute
3. Contact Resistance
30m ohms Max
100mA
4. Insertor/Extraction Force
MIN0.56N (57gf), MAX4.4N(450gf)
Measure by the square steel pin with 0.635±0.002mm
5. Vibration
No electrical discontinuity of 1µs or more
Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions.
6. Moisture Resistance
Contact resistance: 30m ohms Max Insulation resistance: 1000M ohms Min 96 hours at temperature of 40ç and humidity of 90% to 95%
7. Temperature Cycle
Contact resistance: 30m ohms max.Insulation resistance: 1000M ohms min.
8. Durability (Mating/un-mating) Contact resistance: 30m ohms max.
9. Resistance to Soldering heat
(-55ç: 30 minutes ➝ 15~35ç: 2 to 3 minutes➝
(-85ç: 30 minutes ➝ 15~35ç: 2 to 3 minutes) 5 cycles
Tin plating: 30 cycles
No deformation of components affecting performance.
Flow: 250ç for 10 seconds
Manual soldering: 300ç for 3 seconds
Note 1. The rated current will be changed according to cable sizes for use. For the header only, the rating is 3A.
Note 2: Includes temperature rise caused by current flow.
Note 3: The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature Range and
Humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation.
■Material
Product
Part
Material
Finish
Remarks
Crimping Socket
Insulator
Polyamide
Light Brown
UL94V-0
Crimping Contact
ID Socket
Pin Header
Contact
Phosphor copper
Tin plated
–––––
Insulator
Polyamide
Light Brown
UL94V-0
Contact
Phosphor copper
Tin plated
–––––
Insulator
Polyamide
Light Brown
UL94V-0
Contact
Phosphor copper
Tin plated
–––––
Note:Hirose's tin-plated products takes measures against whisker.
■Ordering Information
●Connector
DF1
q Series Name
- * S - 2.5 C
q
w
e
r
t
t Contact Type
: DF1
w Number of Contact : 2 to 16, 20
C
e Connector Type
R24
: AWG24 ID socket
S: Socket
R26
: AWG26 ID socket
R28
: AWG28 ID socket
DSA
: Straight through hole
P: Pin Header
r Contact Pitch
: 2.5mm
DS
●Protector
DF1
q Number of Contact : 2 to 16, 20
- * A 1.05
q
w
e
●Contact
DF1
w Connector Type
- 2428SCF
q
w
2428 : AWG 24 to 28
: Right angle through hole
e Cable Clamp Size
1.05: UL1007 AWG26, 28
1.33: UL1007 AWG24
A: Discrete wire
q Applicable Cable Size
: Crimping socket
w Packaging Type
SCF
SC
: Socket contact, reel
: Socket contact, bag
B147
■ID Socket (Open End Type)
●Applicable Cable
Part Number
Applicable Cable
Jacket Diameter
DF1-*S-2.5R24 UL1007 AWG24(11 pieces/0.16mm) 1.35 to 1.45mm
DF1-*S-2.5R26 UL1007 AWG26( 7 pieces/0.16mm) 1.25 to 1.35mm
Note:This convex portion is located (2 contacts: the center at one point)(3 to 6
contacts: as shown in the illustration)(more than 7 contacts: one center at
one point added to the above illustration).
DF1-*S-2.5R28 UL1007 AWG28( 7 pieces/0.127mm) 1.15 to 1.25mm
(Tin plated annealing copper wire)
●AWG24 Cable Socket Size (Triangle Mark: Green)
Part Number
DF1-2S-2.5R24
DF1-3S-2.5R24
DF1-4S-2.5R24
DF1-5S-2.5R24
DF1-6S-2.5R24
DF1-7S-2.5R24
DF1-8S-2.5R24
DF1-9S-2.5R24
Number of Contacts
CL No.
541-0039-2
2
541-0040-1
3
541-0041-4
4
541-0042-7
5
541-0043-0
6
541-0044-2
7
541-0045-5
8
541-0046-8
9
A
8
10.5
13
15.5
18
20.5
23
25.5
B
2.5
5
7.5
10
12.5
15
17.5
20
Part Number
DF1-10S-2.5R24
DF1-11S-2.5R24
DF1-12S-2.5R24
DF1-13S-2.5R24
DF1-14S-2.5R24
DF1-15S-2.5R24
DF1-16S-2.5R24
DF1-20S-2.5R24
Number of Contacts
CL No.
541-0047-0
10
541-0048-3
11
541-0049-6
12
541-0050-5
13
541-0051-8
14
541-0052-0
15
541-0053-3
16
541-0057-4
20
A
28
30.5
33
35.5
38
40.5
43
53
Unit: mm
B
22.5
25
27.5
30
32.5
35
37.5
47.5
Part Number
DF1-10S-2.5R26
DF1-11S-2.5R26
DF1-12S-2.5R26
DF1-13S-2.5R26
DF1-14S-2.5R26
DF1-15S-2.5R26
DF1-16S-2.5R26
DF1-20S-2.5R26
Number of Contacts
CL No.
541-0066-5
10
541-0067-8
11
541-0068-0
12
541-0069-3
13
541-0070-2
14
541-0071-5
15
541-0072-8
16
541-0076-9
20
A
28
30.5
33
35.5
38
40.5
43
53
Unit: mm
B
22.5
25
27.5
30
32.5
35
37.5
47.5
Part Number
DF1-10S-2.5R28
DF1-11S-2.5R28
DF1-12S-2.5R28
DF1-13S-2.5R28
DF1-14S-2.5R28
DF1-15S-2.5R28
DF1-16S-2.5R28
DF1-20S-2.5R28
Number of Contacts
CL No.
541-0123-7
10
541-0124-0
11
541-0125-2
12
541-0126-5
13
541-0127-8
14
541-0128-0
15
541-0129-3
16
531-0133-0
20
A
28
30.5
33
35.5
38
40.5
43
53
Unit: mm
B
22.5
25
27.5
30
32.5
35
37.5
47.5
●AWG26 Cable Socket Size (Triangle Mark: Light Blue)
Part Number
DF1-2S-2.5R26
DF1-3S-2.5R26
DF1-4S-2.5R26
DF1-5S-2.5R26
DF1-6S-2.5R26
DF1-7S-2.5R26
DF1-8S-2.5R26
DF1-9S-2.5R26
Number of Contacts
CL No.
541-0058-7
2
541-0059-0
3
541-0060-9
4
541-0061-1
5
541-0062-4
6
541-0063-7
7
541-0064-0
8
541-0065-2
9
A
8
10.5
13
15.5
18
20.5
23
25.5
B
2.5
5
7.5
10
12.5
15
17.5
20
●AWG28 Cable Socket Size (Triangle Mark: Red)
Part Number
DF1-2S-2.5R28
DF1-3S-2.5R28
DF1-4S-2.5R28
DF1-5S-2.5R28
DF1-6S-2.5R28
DF1-7S-2.5R28
DF1-8S-2.5R28
DF1-9S-2.5R28
Number of Contacts
CL No.
541-0115-9
2
541-0116-1
3
541-0117-4
4
541-0118-7
5
541-0119-0
6
541-0120-9
7
541-0121-1
8
541-0122-4
9
A
8
10.5
13
15.5
18
20.5
23
25.5
B
2.5
5
7.5
10
12.5
15
17.5
20
Note:A packaging quantity is delivered by the bag unit (100 pcs.). If needed, please order the products per bag.
B148
■Protector
Note 1.Product contact No. mark, however 2 and 3 contacts are not indicated.
Note 2.Round hole to distinguish the protector A1.05 and 1.33 (DF1-*A1.05 only)
Select the protector after inspecting the cable jacket diameter for use.
Protector Type
Applicable Jacket Diameter
Recommended Cable
DF1-*A1.33
Ø1.35 to Ø1.45
UL1007 AWG24
DF1-*A1.05
Ø1.1 to Ø1.35
UL1007 AWG26 28
*indicates contact No.
●AWG24 Cable Protector Size
Unit: mm ●AWG26, 28 Cable Protector Size
Number of Contacts A
Number of Contacts
Part Number
CL No.
B
C
Part Number
CL No.
1.1
2.5
541-0077-1
10
541-0096-6
DF1- 2A1.33
2
DF1- 2A1.05
2
541-0078-4
541-0097-9
1.1
5
12.5
DF1- 3A1.33
3
DF1- 3A1.05
3
1.1
7.5
541-0079-7
15
541-0098-1
DF1- 4A1.33
4
DF1- 4A1.05
4
1.1
541-0080-6
17.5 10
541-0099-4
DF1- 5A1.33
5
DF1- 5A1.05
5
541-0081-9
20 12.5 1.1
541-0100-1
DF1- 6A1.33
6
DF1- 6A1.05
6
1.1
541-0082-1
22.5 15
541-0101-4
DF1- 7A1.33
7
DF1- 7A1.05
7
541-0083-4
25 17.5 1.1
541-0102-7
DF1- 8A1.33
8
DF1- 8A1.05
8
1.1
541-0084-7
27.5 20
541-0103-0
DF1- 9A1.33
9
DF1- 9A1.05
9
541-0085-0
541-0104-2
30 22.5 1.1
DF1-10A1.33
10
DF1-10A1.05
10
1.1
541-0086-2
32.5 25
541-0105-5
DF1-11A1.33
11
DF1-11A1.05
11
541-0087-5
35 27.5 1.1
541-0106-8
DF1-12A1.33
12
DF1-12A1.05
12
1.1
541-0088-8
37.5 30
541-0107-0
DF1-13A1.33
13
DF1-13A1.05
13
541-0089-0
40 32.5 1.1
541-0108-3
DF1-14A1.33
14
DF1-14A1.05
14
1.1
541-0090-0
42.5 35
541-0109-6
DF1-15A1.33
15
DF1-15A1.05
15
541-0091-2
45 37.5 1.1
541-0110-5
DF1-16A1.33
16
DF1-16A1.05
16
541-0095-3
541-0114-6
55 47.5 1.1
DF1-20A1.33
20
DF1-20A1.05
20
Note:A packaging quantity is delivered by the bag unit (100 pcs.). If needed, please order the product per bag.
A
10
12.5
15
17.5
20
22.5
25
27.5
30
32.5
35
37.5
40
42.5
45
55
Unit: mm
B
C
0.7
2.5
0.7
5
0.7
7.5
0.7
10
12.5 0.7
0.7
15
17.5 0.7
0.7
20
22.5 0.7
0.7
25
27.5 0.7
0.7
30
32.5 0.7
0.7
35
37.5 0.7
47.5 0.7
B149
■Crimping Socket
Photo: Contact Inserted.
Note1:This convex portion is located (2 contacts: the center at one point)(3 to 6 contacts: as shown in
the illustration)(more than 7 contacts: one center at one point added to the above illustration).
Note 2.The terminal number indicates all contact numbers.
Part Number
DF1- 2S-2.5C
DF1- 3S-2.5C
DF1- 4S-2.5C
DF1- 5S-2.5C
DF1- 6S-2.5C
DF1- 7S-2.5C
DF1- 8S-2.5C
DF1- 9S-2.5C
DF1-10S-2.5C
Note:A packaging
Number of Contacts
Number of Contacts
CL No.
A
B
Part Number
CL No.
2.5
541-0136-9
8
541-0145-0
2
DF1-11S-2.5C
11
5
541-0137-1
10.5
541-0146-2
3
DF1-12S-2.5C
12
541-0138-4
541-0147-5
7.5
13
4
DF1-13S-2.5C
13
10
541-0139-7
15.5
541-0148-8
5
DF1-14S-2.5C
14
12.5
541-0140-6
18
541-0149-0
6
DF1-15S-2.5C
15
15
541-0141-9
20.5
541-0150-0
7
DF1-16S-2.5C
16
17.5
541-0142-1
23
541-0152-5
8
DF1-18S-2.5C
18
20
541-0143-4
25.5
541-0154-0
9
DF1-20S-2.5C
20
22.5
541-0144-7
28
10
quantity is delivered by the bag unit (100 pcs.). If needed, please order the product per bag.
A
30.5
33
33.5
38
40.5
43
48
53
Unit: mm
B
25
27.5
30
32.5
35
37.5
42.5
47.5
■Crimping Contact for Socket
Part Number
DF1-2428SCF
DF1-2428SC
1.85
CL No.
541-0134-3
541-0135-6
Packaging Type
Reel
Bag
Number of Contacts
10000
100
Finish
Tin plating
●Applicable Cable (Tin Plated Annealing Copper Wire)
2.5
;;;
;;;
;;;
UL1061, UL1007
1.5
3
Ø 1.5
6.5
Conductor Size (wire construction)
Jacket Diameter
AWG24 (11 cores/0.16mm)
AWG26 ( 7 cores/0.16mm)
Ø0.9 to Ø1.5mm
AWG28 (07 cores/1.24mm)
Note:If other cables are used instead of the applicable cable, contact Hirose sales
department.
●Recommended Cable
1.5
0.9 0.6 1.5
5.9
2.2
2.2
1.9
●Strip Length
1.6 to 2.1mm
BApplicable Crimping Tool
Type
Part Number
CL No.
Applicable Contact
Applicator
AP105-DF1-2428S
901-4538-8
DF1-2428SCF
Press Main Unit
CM-105
901-0005-4
--------------Manual Crimping Tool DF1-T2428S
550-0102-8
DF1-2428SC
Extraction Tool
DF1-C-PO
550-0177-7
DF1-2428SCF
Note:If a trouble has occurred due to tools which are not designated by Hirose, Hirose
won't guarantee any product.
B150
■Pin Header Right Angle Type
●Board Through-hole Diameter : ø1.1++00.1
Number of Contacts
Number of Contacts
Part Number
CL No.
A
B
C
Part Number
CL No.
2.5
3.8
541-0020-4
7.5
DF1- 2P-2.5DS
2
DF1-11P-2.5DS
541-0029-9
11
541-0021-7
541-0030-8
5
6.3
10
DF1- 3P-2.5DS
3
DF1-12P-2.5DS
12
7.5
8.8
541-0022-0
12.5
DF1- 4P-2.5DS
4
DF1-13P-2.5DS
541-0031-0
13
10
11.3
541-0023-2
15
DF1- 5P-2.5DS
5
DF1-14P-2.5DS
541-0032-3
14
541-0024-5
17.5 13.8 12.5
DF1- 6P-2.5DS
6
DF1-15P-2.5DS
541-0033-6
15
15
16.3
541-0025-8
20
DF1- 7P-2.5DS
7
DF1-16P-2.5DS
541-0034-9
16
541-0026-0
22.5 18.8 17.5
DF1- 8P-2.5DS
8
DF1-18P-2.5DS
541-0036-4
18
20
21.3
541-0027-3
25
DF1- 9P-2.5DS
9
DF1-20P-2.5DS
541-0038-0
20
541-0028-6
27.5 23.8 22.5
DF1-10P-2.5DS
10
Note 1.A packaging quantity is delivered by the bag unit (100 pcs.). If needed, please order the product per bag.
Note 2.The socket applicable to the 18 contact connector is only crimping type.
A
30
32.5
35
37.5
40
42.5
47.5
52.5
B
26.3
28.8
31.3
33.8
36.3
38.8
43.8
48.8
Unit: mm
C
25
27.5
30
32.5
35
37.5
42.5
47.5
A
30
32.5
35
37.5
40
42.5
47.5
52.5
B
26.3
28.8
31.3
33.8
36.3
38.8
43.8
48.8
Unit: mm
C
25
27.5
30
32.5
35
37.5
42.5
47.5
■Pin Header Straight Type
●Board Through-hole Diameter : ø1.1++00.1
Number of Contacts
Number of Contacts
Part Number
CL No.
A
B
C
Part Number
CL No.
2.5
3.8
7.5
DF1- 2P-2.5DSA 541-0001-0
2
DF1-11P-2.5DSA 541-0010-0
11
5
6.3
10
DF1- 3P-2.5DSA 541-0002-2
3
DF1-12P-2.5DSA 541-0011-3
12
7.5
8.8
12.5
DF1- 4P-2.5DSA 541-0003-5
4
DF1-13P-2.5DSA 541-0012-6
13
10
11.3
15
DF1- 5P-2.5DSA 541-0004-8
5
DF1-14P-2.5DSA 541-0013-9
14
17.5 13.8 12.5
DF1- 6P-2.5DSA 541-0005-0
6
DF1-15P-2.5DSA 541-0014-1
15
15
16.3
20
DF1- 7P-2.5DSA 541-0006-3
7
DF1-16P-2.5DSA 541-0015-4
16
22.5 18.8 17.5
DF1- 8P-2.5DSA 541-0007-6
8
DF1-18P-2.5DSA 541-0017-0
18
20
21.3
25
DF1- 9P-2.5DSA 541-0008-9
9
DF1-20P-2.5DSA 541-0019-5
20
27.5 23.8 22.5
DF1-10P-2.5DSA 541-0009-1
10
Note 1.A packaging quantity is delivered by the bag unit (100 pcs.). If needed, please order the product per bag.
Note 2.The socket applicable to the 18 contacts connector is only crimping type.
B151
BDF1 Connection Press
Part Number
CL No.
DF1 Connection Press HP513
550-0134-4
Height
Width
Depth
Weight
200mm 260mm 250mm
3.7kg
Note:The intermediate connection can be established by removing the
cable cuttingblade of this press machine.
Note:Select a protector after inspecting a cable Jacket diameter for use.
Protector Type
Applicable Jacket Diameter Recommended Cable
DF1-*A1.33
Ø1.35 to Ø1.45
UL1007 AWG24
DF1-*A1.05
Ø1.1 to Ø1.35
UL1007 AWG26, 28
DF1 Connection Press HP513
* indicates contact No.
BDF1 Cable Crimper
Part Number
CL No.
DF1 Cable Crimper
550-0130-3
DF1 Cable Crimper
Used to install the cable in the protector.
BPrecautions
1. Recommended Soldering Condition
Flow: 250ç for 3 seconds
2. Cleaning Condition
Refer to Nylon Connector Use Hand book.
Manual soldering: 290ç for 2 seconds
3. Connection Condition
[Crimping]
Refer to Nylon Connector Use Hand book.
[ID]
●For the insulation displacement tool, set a set of connector per insulation displacement. If more
than 2 connectors have been set, they interrupt each other, which will cause an insulation
displacement failure.
●After the insulation displacement, make sure that the locks on both protector sides are
completely activated.
B152
Similar pages