DIODE(THREE PHASES BRIDGE TYPE) DF100BA40/80 UL;E76102 （M） Power Diode Module DF100BA is designed for three phase full wave rectification, which has six diodes connected in a three phase bridge configuration. The mounting base of the module is electrically isolated from semiconductor elements for simple heatsink construction. Output DC current is 100Amp （Tc＝102℃） Repetitive peak reverse voltage is up to 800V. 82±0.5 66±0.3 20±0.1 20±0.1 4±0.2 4±0.2 10±0.3 φ 5. 5± 0. 2 4±0.2 5.5±0.2 ● TjMax＝150℃ 10±0.3 mounting base reliability by unique glass passivation （Applications） AC, DC Motor Drive/AVR/Switching -for three phase rectification 12±0.3 1〜 2〜 3〜 12±0.3 30±0.1 5-M5 NAME PLATE 1.0 4.0±0.3 10±0.3 14.5 19±0.2 ＋1.5 22.0−0 ● High 20±0.1 42±0.5 ● Isolated ＋4 ■Maximum Ratings （Tj＝25℃ unless otherwise specified） Symbol Item VRRM VRSM Ratings DF100BA80 Repetitive Peak Reverse Voltage 400 800 V Non-Repetitive Peak Reverse Voltage 480 960 V Item Conditions Output Current （D.C.） Surge Forward Current Three phase full wave. TC：102℃ I2t I2t Value for one cycle of surge current Tj IFSM Unit DF100BA40 Symbol ID Unit：a −5 1cycle, 50/60HZ, peak value, non-repetitive Ratings Unit 100 A 910/1000 4100 A2S A Operating Junction Temperature −40 to ＋150 ℃ Tstg Storage Temperature −40 to ＋125 ℃ VISO Isolation Breakdown Voltage（R.M.S.） A.C. 1 minute 2500 V Mounting（M5） Recommended Value 1.5-2.5（15-25） 2.7（28） Terminal（M5） Recommended Value 1.5-2.5（15-25） 2.7（28） N･m （㎏f･B） 160 g Mounting Torque Mass Typical Value ■Electrical Characteristics Symbol Item Conditions Ratings Min. Typ, Max. Unit IRRM Repetitive Peak Reverse Current Tj＝150℃ at VRRM 10 VFM Forward Voltage Drop Tj＝25℃，IFM＝100A, Inst. measurement 1.2 V Junction to case 0.2 ℃/W Rth（j-c） Thermal Impedance SanRex mA ® 50 Seaview Blvd. Port Washington, NY 11050-4618 PH.(516)625-1313 FAX(516)625-8845 E-mail: [email protected] DF100BA40/80 Maximum Forward Characteristics ３００ ２ Tj＝25℃ １０２ Output Current vs. Power Dissipation Power Dissipation Pav（W） Forward Current I（A） F ５ ２００ ５ ２ １０１ Three Phase １００ ５ ２ １００ ０． ６ ０． ８ １． ０ １． ２ １． ４ １． ６ ０ ０ １． ８ ５０ １５０ １００ Output Current ID（A） Output Current vs. Allowable case Temperature １０００ Cycle Surge Forward Current Rating （Non-Repetitive） Surge Forward Current I（A） F Allowable Case Temperature Tc（℃） Forward Voltage Drop V（V） F １４０ Three Phase １３０ １２０ Per one element Tj＝25℃ start ５００ １１０ １００ ９０ ０ ０ ５０ ０ １００ １００ ２ ５ １０１ ２ ５ １０２ ２ Time（Cycles） Output Current ID（A） Transient Thermal Impedance θj-c（℃/W） 60Hz 50Hz Transient Thermal Impedance（max） ０． ２ Junction to Case ０． １ ０ ５ １０-１ SanRex ２ ５ １００ ２ Time t（sec） ５ １０１ ２ ５ ® 50 Seaview Blvd. Port Washington, NY 11050-4618 PH.(516)625-1313 FAX(516)625-8845 E-mail: [email protected]