Hirose DF13-10DS-1.25V 1.25mm pitch miniature crimping connector Datasheet

1.25mm Pitch Miniature Crimping Connector
DF13 Series
Right Angle Type
Straight Type
Type
■Features
1. Miniature Size
Designed in the low profile at mounting height 5.8mm.
(SMT mounting straight type)
(For DIP type, the mounting height is to 5.3mm to the
straight and 3.6mm at the right angle)
Mounting Type
Mounting Height
DIP
5.3mm
SMT
5.8mm
DIP
3.6mm
SMT
Correspond to Automatic Mounting
Secure the automatic plain area for the absorption
type automatic mounting machine.
Straight Type
Absorption area
2. Multi-contact
The double row type achieves the multi-contact up to 40
contacts, and secures 30% higher density in the mounting
area, compared with the single row type.
3. Correspond to Automatic Mounting
The header provides the grade with the vacuum absorption
area, and secures automatic mounting by the embossed
tape packaging.
In addition, the tube packaging can be selected.
4. Integral Basic Function Despite Miniature Size
The header is designed in a scoop-proof box structure, and
completely prevents mis-insertion.
In addition, the surface mounting (SMT) header is equipped
with the metal fitting to prevent solder peeling.
Metal fitting
Right Angle Type
Absorption area
■Applications
Note PC, mobile terminal, miniature type business equipment,
and other various consumer equipment, including video
camera
Figure 1
B183
■Product Specifications
Operating Temperature Range: -35 to +85ç (Note 1) Storage Temperature Range: -10 to +60ç (Note 2)
Current rating 1A
Rating
Voltage rating 150V AC Operating Moisture Range: 40 to 80%
Item
Storage Moisture Range: 40 to 70%
Specification
(Note 2)
Condition
1.Insulation Resistance
500M ohms min.
100V DC
2.Withstanding voltage
No flashover or insulation breakdown.
500V AC/1 minute
3.Contact Resistance
30m ohms max.
100mA
4.Single Insertion/Extraction Force 0.3N (30gf) min., 3N (300gf) max.
Measured at the square steel pin of 0.35±0.002mm
5.Vibration
Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions.
No electrical discontinuity of 1µs or more
6.Humidity (Steady state) Contact resistance: 30m ohms max. Insulation resistance: 500M ohms min.
96 hours at temperature of 40ç and humidity of 90% to 95%
7.Temperature Cycle
(-55ç: 30 minutes➝ 5 to 35ç: 10 minutes➝ 85ç: 30 minutes➝ 5 to 35ç: 10 minutes) 5 cycles
Contact resistance: 30m ohms max. Insulation resistance: 500M ohms min.
8.Durability (Mating/un-mating) Contact resistance: 30m ohms max.
Tin plating: 30 cycles
9.Resistance to Soldering heat
Flow: 250ç for 10 seconds
Gold plating: 50 cycles
No deformation of components affecting performance.
Manual soldering: 300ç for 3 seconds
Reflow: At the recommended temperature profile
Manual soldering: 300ç for 3 seconds
Note 1: Includes temperature rise caused by current flow.
Note 2: The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature Range and
Humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation.
■Material
Product
Part
Finish
Remarks
Crimping Socket
Insulator
Crimping Contact for Socket
Contact
Polyamide
Beige
UL94V-0
Phosphor copper
Tin plated or gold plated
-
Insulator
Polyamide
Beige
UL94V-0
Contact
Brass
Tin plated
-
Insulator
Polyamide
Beige
UL94V-0
Contact
Brass
Tin plated or gold plated
-
Metal Fitting
Phosphor copper
Tin plated
-
Pin Header (Through hole)
Pin Header (SMT)
Material
■Ordering Information
●Connector
DF13
q
# - * S - 1.25 C
w
e
r
t
y
q Series Name
: DF13
e Number of Contacts
t Contact Pitch: 1.25mm
w Style Symbol
: Blank: With boss
r Single row: 2 to 12, 14, 15
y Contact Type
A: Without boss
r Double row: 10, 20, 30, 40
V Type
C : Crimping socket / DSA : Straight through hole
B: Without boss, embossed tape type r Connector Type
DS : Right angle through hole / V : Straight SMT
C: Without boss, embossed tape type t S: Single row socket / P: Single row pin header
H : Right angle SMT
t DS: Double row socket / DP: Double row pin header
●Contact
DF 13 - 2630 SCF A
q
B184
w
e
q Applicable Cable Size 2630: AWG26 to 30
w Packaging Type SCF: Socket Contact/Reel
e Plating Type
Blank: Tin plated
A : Gold plated
■Single Row Socket
[Specific No.] - **, (**)
Blank: 1 bag: 100 pcs.
Photo: Contact insertion
Number of Contacts
Part Number
CL No.
A
1.25
2
DF13-2S-1.25C(**) 536-0001-4-**
2.50
3
DF13-3S-1.25C(**) 536-0002-7-**
3.75
4
DF13-4S-1.25C(**) 536-0003-0-**
5.00
5
DF13-5S-1.25C(**) 536-0004-2-**
6.25
6
DF13-6S-1.25C(**) 536-0005-5-**
7.50
7
DF13-7S-1.25C(**) 536-0006-8-**
8.75
8
DF13-8S-1.25C(**) 536-0007-0-**
Note 1.The quantity at the specific No. "None" is delivered
B
4.15
5.40
6.65
7.90
9.15
10.40
11.65
per bag
Part Number
DF13- 9S-1.25C(**)
DF13-10S-1.25C(**)
DF13-11S-1.25C(**)
DF13-12S-1.25C(**)
DF13-14S-1.25C(**)
DF13-15S-1.25C(**)
Number of Contacts
CL No.
9
536-0008-3-**
10
536-0009-6-**
11
536-0010-5-**
12
536-0011-8-**
14
536-0013-3-**
15
536-0014-6-**
A
10.00
11.25
12.50
13.75
16.25
17.50
Unit: mm
B
12.90
14.15
15.40
16.65
19.15
20.40
(100 pcs.). If needed, please select and order the products per bag.
■Double Row Socket
Photo: Contact insertion state
Unit: mm
Part Number
DF13-10DS-1.25C(**)
DF13-20DS-1.25C(**)
DF13-30DS-1.25C(**)
DF13-40DS-1.25C(**)
Note:The quantity
Number of Contacts
CL No.
10
536-0550-2-**
20
536-0555-6-**
30
536-0560-6-**
40
536-0565-0-**
at the specific No. "Blank" is
A
B
[Specific No.] – **, (**)
Blank: 1 bag: 100 pcs.
5.00
10.40
11.25
16.65
17.50
22.90
23.75
29.15
delivered per bag (100pcs). If needed, please select and order the products per bag.
B185
■Single Row Straight Pin Header (Through hole)
[Specific No.] – **, (**)
Blank: Tin plated
20: Tin plated, tube packaging
BTube Dimensions
●Board Through-hole Diameter:Ø0.6±0.03
Number of Contacts
Part Number
CL No.
A
1.25
2
DF13-2P-1.25DSA(**) 536-0101-9-**
2.50
3
DF13-3P-1.25DSA(**) 536-0102-1-**
3.75
4
DF13-4P-1.25DSA(**) 536-0103-4-**
5.00
5
DF13-5P-1.25DSA(**) 536-0104-7-**
6.25
6
DF13-6P-1.25DSA(**) 536-0105-0-**
7.50
7
DF13-7P-1.25DSA(**) 536-0106-2-**
8.75
8
DF13-8P-1.25DSA(**) 536-0107-5-**
Note 1.The quantity at the specific No. "None" is delivered
B
4.15
5.40
6.65
7.90
9.15
10.40
11.65
per bag
Number of Contacts
Part Number
CL No.
A
10.00
9
DF13- 9P-1.25DSA(**) 536-0108-8-**
11.25
10
DF13-10P-1.25DSA(**) 536-0109-0-**
12.50
11
DF13-11P-1.25DSA(**) 536-0110-0-**
13.75
12
DF13-12P-1.25DSA(**) 536-0111-2-**
15.00
13
DF13-13P-1.25DSA(**) 536-0112-5-**
16.25
14
DF13-14P-1.25DSA(**) 536-0113-8-**
17.50
15
DF13-15P-1.25DSA(**) 536-0114-0-**
(100 pcs.). If needed, please select and order the products
Unit: mm
B
12.90
14.15
15.40
16.65
17.90
19.15
20.40
per bag.
■Single Row Right Angle Pin Header (Through hole)
[Specific No.] – **, (***)
(20): Tin plated tube packaging
BTube Dimensions
●Board Through-hole Diameter:Ø0.6±0.03
Number of Contacts A
Part Number
CL No.
B Tube Packaging Quantity
Part Number
1.25 4.15
115
2
DF13-2P-1.25DS(**) 536-0151-7-**
DF13- 9P-1.25DS(**)
2.50 5.40
89
3
DF13-3P-1.25DS(**) 536-0152-0-**
DF13-10P-1.25DS(**)
3.75 6.65
72
4
DF13-4P-1.25DS(**) 536-0153-2-**
DF13-11P-1.25DS(**)
5.00 7.90
61
5
DF13-5P-1.25DS(**) 536-0154-5-**
DF13-12P-1.25DS(**)
6.25 9.15
52
6
DF13-6P-1.25DS(**) 536-0155-8-**
DF13-14P-1.25DS(**)
7.50 10.40
46
7
DF13-7P-1.25DS(**) 536-0156-0-**
DF13-15P-1.25DS(**)
8.75 11.65
41
8
DF13-8P-1.25DS(**) 536-0157-3-**
Note 1.Order the tube packaging product, multiplying the tube packaging quantity.
B186
Unit: mm
Number of Contacts A
CL No.
B Tube Packaging Quantity
37
9
10.00 12.90
536-0158-6-**
34
10
11.25 14.15
536-0159-9-**
31
11
12.50 15.40
536-0160-8-**
29
12
13.75 16.65
536-0161-0-**
25
14
16.25 19.15
536-0163-6-**
23
15
17.50 20.40
536-0164-9-**
BSingle Row Straight Pin Header (SMT)
[Specific No.] – **, (**)
(20): Tin plated tube package
(50): Gold plated tube package
This pin header is a box type style. Therefore, the header has neither vacuum absorption
face nor embossed tape packaging specification.
Unit: mm
Part Number
DF13- 2P-1.25V(**)
DF13- 3P-1.25V(**)
DF13- 4P-1.25V(**)
DF13- 5P-1.25V(**)
DF13- 6P-1.25V(**)
DF13- 7P-1.25V(**)
DF13- 8P-1.25V(**)
DF13- 9P-1.25V(**)
DF13-10P-1.25V(**)
DF13-11P-1.25V(**)
DF13-12P-1.25V(**)
DF13-14P-1.25V(**)
DF13-15P-1.25V(**)
CL No.
536-0201-3-**
536-0202-6-**
536-0203-9-**
536-0204-1-**
536-0205-4-**
536-0206-7-**
536-0207-0-**
536-0208-2-**
536-0209-5-**
536-0210-4-**
536-0211-7-**
536-0213-2-**
536-0214-5-**
Number of Contacts
2
3
4
5
6
7
8
9
10
11
12
14
15
A
1.25
2.50
3.75
5.00
6.25
7.50
8.75
10.00
11.25
12.50
13.75
16.25
17.50
B
4.15
5.40
6.65
7.90
9.15
10.40
11.65
12.90
14.15
15.40
16.65
19.15
20.40
C
7.15
8.40
9.65
10.90
12.15
13.40
14.65
15.90
17.15
18.40
19.65
22.15
23.40
D
3.35
4.60
5.85
7.10
8.35
9.60
10.85
12.10
13.35
14.60
15.85
18.35
19.60
E
5.65
6.90
8.15
9.40
10.65
11.90
13.15
14.40
15.65
16.90
18.15
20.65
21.90
F
Tube Package Quantity
1.95
67
3.20
57
4.45
49
5.70
44
6.95
39
8.20
36
9.45
33
10.70
30
11.95
28
13.20
26
14.45
24
16.95
21
18.20
20
Remark
Guide post
Note:Please order the tube packaging products, multiplying the tube packaging quantity.
BPCB mounting pattern
BTube Dimensions
Note:If the pattern exists in the shaded area, and isn't treated with resist, it could touch the connector contact.
B187
■Single Row Straight Pin Header (SMT)
■(Three-Wall/Correspond to Vacuum Absorption)
BPCB mounting pattern
Note 1.This hole isn't needed for "No guide post".
Note 2.If the pattern exists in the shaded area,
and isn't treated with resist, it could touch
the connector contact.
[Specific No.] – **, (**)
(20): Tin plated tube packaging
(21): Tin plated embossed tape packaging
(50): Gold plated tube packaging
(51): Gold plated embossed tape packaging
Unit: mm
Part Number
CL No.
Number of
Contacts
DF13B- 2P-1.25V(**)
DF13B- 3P-1.25V(**)
DF13B- 4P-1.25V(**)
DF13B- 5P-1.25V(**)
DF13B- 6P-1.25V(**)
DF13B- 7P-1.25V(**)
DF13B- 8P-1.25V(**)
DF13B- 9P-1.25V(**)
DF13B-10P-1.25V(**)
DF13B-11P-1.25V(**)
DF13B-12P-1.25V(**)
DF13B-14P-1.25V(**)
DF13B-15P-1.25V(**)
536-0051-2-**
536-0052-5-**
536-0053-8-**
536-0054-0-**
536-0055-3-**
536-0056-6-**
536-0057-9-**
536-0058-1-**
536-0059-4-**
536-0060-3-**
536-0061-6-**
536-0063-1-**
536-0064-4-**
2
3
4
5
6
7
8
9
10
11
12
14
15
DF13C- 2P-1.25V(**)
DF13C- 3P-1.25V(**)
DF13C- 4P-1.25V(**)
DF13C- 5P-1.25V(**)
DF13C- 6P-1.25V(**)
DF13C- 7P-1.25V(**)
DF13C- 8P-1.25V(**)
DF13C- 9P-1.25V(**)
DF13C-10P-1.25V(**)
DF13C-11P-1.25V(**)
DF13C-12P-1.25V(**)
DF13C-14P-1.25V(**)
DF13C-15P-1.25V(**)
Note 1.Please order
Note 2.Please order
B188
A
B
C
D
E
F
1.25
2.50
3.75
5.00
6.25
7.50
8.75
10.00
11.25
12.50
13.75
16.25
17.50
4.15
5.40
6.65
7.90
9.15
10.40
11.65
12.90
14.15
15.40
16.65
19.15
20.40
7.15
8.40
9.65
10.90
12.15
13.40
14.65
15.90
17.15
18.40
19.65
22.15
23.40
3.35
4.60
5.85
7.10
8.35
9.60
10.85
12.10
13.35
14.60
15.85
18.35
19.60
5.65
6.90
8.15
9.40
10.65
11.90
13.15
14.40
15.65
16.90
18.15
20.65
21.90
1.95
3.20
4.45
5.70
6.95
8.20
9.45
10.70
11.95
13.20
14.45
16.95
18.20
–
1.25 4.15 7.15
2
5.65 1.95
536-0401-2-**
–
2.50 5.40 8.40
3
6.90 3.20
536-0402-5-**
–
3.75 6.65 9.65
4
8.15 4.45
536-0403-8-**
–
5.00 7.90 10.90
5
9.40 5.70
536-0404-0-**
–
6.25 9.15 12.15
6
10.65 6.95
536-0405-3-**
–
7.50 10.40 13.40
7
11.90 8.20
536-0406-6-**
–
8.75 11.65 14.65
8
13.15 9.45
536-0407-9-**
–
10.00 12.90 15.90
9
14.40 10.70
536-0408-1-**
–
11.25 14.15 17.15
10
15.65 11.95
536-0409-4-**
–
12.50 15.40 18.40
11
16.90 13.20
536-0410-3-**
–
13.75 16.65 19.65
12
18.15 14.45
536-0411-6-**
–
16.25 19.15 22.15
14
20.65 16.95
536-0413-1-**
–
17.50 20.40 23.40
15
21.90 18.20
536-0414-4-**
the tube packaging product, multiplying the tube packaging quantity.
the embossed tape packaging product according to reel number. (1000
G
Tube Packaging
Quantity
Emboss
Width
2.20
3.45
3.10
4.35
5.60
6.85
8.10
9.35
10.60
11.85
13.10
15.60
16.85
67pcs
57
49
44
39
36
33
30
28
26
24
21
20
16
16
24
24
24
24
24
24
24
32
32
32
44
2.20
3.45
3.10
4.35
5.60
6.85
8.10
9.35
10.60
11.85
13.10
15.60
16.85
67pcs
57
49
44
39
36
33
30
28
26
24
21
20
16
16
24
24
24
24
24
24
24
32
32
32
44
pcs. per reel)
Remarks
With
boss
Without
boss
■Single Row Right Angle Pin Header (SMT)
■(Four-Wall/Correspond to Emboss Absorption)
BPCB mounting pattern
BTube Dimensions
[Specific No.] – **, (**)
(20): Tin plated tube packaging
(21): Tin plated embossed tape packaging
(50): Gold plated tube packaging
(51): Gold plated embossed tape packaging
Unit: mm
Part Number
CL No.
Number of
Contacts
DF13- 2P-1.25H(**)
DF13- 3P-1.25H(**)
DF13- 4P-1.25H(**)
DF13- 5P-1.25H(**)
DF13- 6P-1.25H(**)
DF13- 7P-1.25H(**)
DF13- 8P-1.25H(**)
DF13- 9P-1.25H(**)
DF13-10P-1.25H(**)
DF13-11P-1.25H(**)
DF13-12P-1.25H(**)
DF13-14P-1.25H(**)
DF13-15P-1.25H(**)
536-0251-1-**
536-0252-4-**
536-0253-7-**
536-0254-0-**
536-0255-2-**
536-0256-5-**
536-0257-8-**
536-0258-0-**
536-0259-3-**
536-0260-2-**
536-0261-5-**
536-0263-0-**
536-0264-3-**
2
3
4
5
6
7
8
9
10
11
12
14
15
DF13A- 2P-1.25H(**)
DF13A- 3P-1.25H(**)
DF13A- 4P-1.25H(**)
DF13A- 5P-1.25H(**)
DF13A- 6P-1.25H(**)
DF13A- 7P-1.25H(**)
DF13A- 8P-1.25H(**)
DF13A- 9P-1.25H(**)
DF13A-10P-1.25H(**)
DF13A-11P-1.25H(**)
DF13A-12P-1.25H(**)
DF13A-14P-1.25H(**)
DF13A-15P-1.25H(**)
Note 1.Please order
Note 2.Please order
A
B
C
D
1.25
2.50
3.75
5.00
6.25
7.50
8.75
10.00
11.25
12.50
13.75
16.25
17.50
4.15
5.40
6.65
7.90
9.15
10.40
11.65
12.90
14.15
15.40
16.65
19.15
20.40
7.15
8.40
9.65
10.90
12.15
13.40
14.65
15.90
17.15
18.40
19.65
22.15
23.40
3.35
4.60
5.85
7.10
8.35
9.60
10.85
12.10
13.35
14.60
15.85
18.35
19.60
E
Tube Packaging
Quantity
Emboss
Width
5.65
6.90
8.15
9.40
10.65
11.90
13.15
14.40
15.65
16.90
18.15
20.65
21.90
67pcs
57
49
44
39
36
33
30
28
26
24
21
20
16
16
24
24
24
24
24
24
24
32
32
32
44
–
1.25 4.15 7.15
2
5.65
67pcs
536-0301-8-**
–
2.50 5.40 8.40
3
6.90
57
536-0302-0-**
–
3.75 6.65 9.65
4
8.15
49
536-0303-3-**
–
5.00 7.90 10.90
5
9.40
44
536-0304-6-**
–
6.25 9.15 12.15
6
10.65
39
536-0305-9-**
–
7.50 10.40 13.40
7
11.90
36
536-0306-1-**
–
8.75 11.65 14.65
8
13.15
33
536-0307-4-**
–
10.00 12.90 15.90
9
14.40
30
536-0308-7-**
–
11.25 14.15 17.15
10
15.65
28
536-0309-0-**
–
12.50 15.40 18.40
11
16.90
26
536-0310-9-**
–
13.75 16.65 19.65
12
18.15
24
536-0311-1-**
–
16.25 19.15 22.15
14
20.65
21
536-0313-7-**
–
17.50 20.40 23.40
15
21.90
20
536-0314-0-**
the tube packaging product, multiplying the tube packaging quantity.
the embossed tape packaging product according to reel number. (1000 pcs. per reel)
16
16
24
24
24
24
24
24
24
32
32
32
44
Remarks
With
boss
Without
boss
B189
■Double Row Straight Pin Header (SMT)
■(Four-Wall Type Compliant to Emboss Absorption)
BPCB mounting pattern
Note 1.If the pattern exists in
the shaded area, and
isn't treated with
resist, it could touch
the connector contact.
BTube Dimensions
Note 2.The hole isn't needed
at "Without boss".
[Specific No.] - **, (**)
(20): Tin plated tube packaging
(29): Tin plated embossed tape packaging
(50): Gold plated tube packaging
(59): Gold plated embossed tape packaging
Unit: mm
Number of
Part Number
CL No.
Contacts
Specification Specification Specification Specification Tube Package Emboss
A
B
C
D
5
8.7
7.5
DF13A-10DP-1.25V(**) 536-0510-8-**
10
12.1
DF13A-20DP-1.25V(**) 536-0515-1-**
20
18.35 11.25 14.95 13.75
DF13A-30DP-1.25V(**) 536-0520-1-**
30
24.6 17.5 21.2
DF13A-40DP-1.25V(**) 536-0525-5-**
40
30.85 23.75 27.45 26.25
20
(29)
(50)
(59)
Quantity
Width
K
K
K
K
40 pcs
24
K
K
K
K
26
32
With
–
–
K
K
19
44
boss
–
–
K
K
15
44
DF13A-10DP-1.25V(**) 536-0600-9-**
10
12.1
–
K
K
K
K
40
24
DF13A-20DP-1.25V(**) 536-0605-2-**
20
18.35 11.25 14.95
–
K
K
K
K
26
32
Without
DF13A-30DP-1.25V(**) 536-0610-2-**
30
24.6 17.5 21.2
–
–
–
K
K
19
44
boss
DF13A-40DP-1.25V(**) 536-0615-6-**
40
30.85 23.75 27.45
–
K
K
15
44
5
8.7
–
–
Note 1.Please order the tube packaging product, multiplying the tube packaging quantity.
Note 2.Please order the embossed tape packaging product according to reel number. (1 reel: 1000 pcs.)
Note 3.The absorption cap is attached to the embossed tape packaging product.
B190
Remarks
(20)
■Crimping Contact
Part Number
DF13-2630SCF
DF13-2630SCFA
CL No.
536-0300-5
536-0298-5
Packaging Type
Reel
Reel
Quantity
10,000
10,000
Finish
Tin plating
Gold plating
●Applicable Cable (Tin Plating Annealed Copper Wire)
Conductor Size (Wire construction)
Jacket Diameter
AWG26(7 cores./0.16mm)
AWG28(7 cores./0.127mm)
Ø0.65 to Ø1.0mm
AWG30(7 cores./0.1mm)
Note:If other cables are used instead of the applicable cable, please contact the Hirose
sales department.
●Recommended Cable
UL1571
●Strip Length
1.2 to 1.9mm
BApplicable Crimping Tool
Type
Part Number
CL No.
Applicable Contact
Applicator
AP105-DF13-2630S
901-4531-9
DF13-2630SCF/SCFA
Press Main Unit
CM-105
901-0005-4
--------------Manual Crimping Tool DF13-TB2630HC
550-0256-1
DF13-2630SCF
Extraction Tool
DF-C-PO(B)
550-0179-2
DF13-2630SCF
Note 1.If a trouble has occurred due to other tools, which are not designated by Hirose,
Hirose won't guarantee any product.
Note 2.The manual crimping tool is used to sequentially cut the reel contact with carrier.
BApplication Pattern
Through hole
(Single Row Product)
SMT
(Double Row Product)
Straight
Right Angle
SMT
(Single Row Product)
B191
BEmbossed Carrier Tape Dimensions
KDF13B-*P-1.25V With boss
KDF13C-*P-1.25V Without boss
KDF13-*P-1.25H
KDF13A-*P-1.25H
Unit: mm
Product Type
Number of Contacts
A
B
DF13B-*P-1.25V
2, 3
16
DF13C-*P-1.25V
4 to 90
24
10 to 14
15
DF13-*P-1.25H
DF13A-*P-1.25H
Note:The 13 contacts is not serialized.
B192
C
D
–––––––
7.5
16.4
–––––––
11.5
24.4
32
28.4
14.2
32.4
44
40.4
20.2
44.4
BPrecautions
1. Recommended Temperature
Profile (SMT)
Note 1.This process is allowed up to twice under the same condition.
However, the interval between the first and second processes must be maintained at
the room temperature.
Note 2.The temperature indicates the board surface temperature in the connector lead area.
2. Recommended Soldering
Condition (SMT)
3. Recommended Screen
Manual soldering: 290ç for 2 seconds
0.15 to 0.2mm
Thickness (SMT)
4. Board Warpage (SMT)
Max 0.03mm in the connector center area, based on both connector edges
5. Recommended Soldering
Flow: 250ç for 3 seconds
Manual soldering: 290ç for 2 seconds
5. Condition (Through hole)
6. Cleaning Condition
Refer to Nylon Connector Use Hand book.
7. Connection Condition
Refer to Nylon Connector Use Hand book.
■Carefully carry out the crimping operation according to "Crimping Condition Sheet" and
"Crimping Quality Standard", because the crimping contact is an extremely small style.
8. Cautions
■Be careful for the excessive scoop insertion/extraction, which will cause damage to the
product.
B193
Similar pages