Hirose DF19K-14S-1F 1 mm-pitch low profile connector system for wire to pcb applications suitable for use with discrete wire, fpc or fine coaxial cable Datasheet

NEW
1 mm-Pitch Low Profile Connector System for Wire to PCB Applications
Suitable for use with Discrete Wire, FPC or Fine Coaxial Cable.
DF19 Series
Drawing of mated connectors
on a DF19G - *P-1H board
,,,,,,
,,,,
,,
,,,,,
,,
,,
,,,,,,
,,,
,,,,
,,,,,
,,,
,
,,,,,,,,,,,,,,,,
,,,,,,,
,,,,,,,,,,,,,,
,,,,,
,,,,
,,,,,
,,,,
,,,,,,,
Drawing of mated connectors
on a DF19K- *P-1H board
For connection
of cables
On-board type
For connection
of FPC
Offset type
For connection of
fine coaxial cables
Reverse offset type
,,,,
,,,,
,,,,,
,
,,,,,,
,,,,,,
,,,,
,,,
,,,,,,,,,,,,,,,,
,,,,,,,,,,,,,,,,
,,,,,,,
,,,,,,,,,,,,,,
,,,,,
,,,,
,,,,
,,,,,,,
,,,,
Drawing of mated connectors
on a DF19L- *P-1H board
■Features
1. Ultra Low Profile
FPC type: Max. 1.7 mm thick
Discrete Wire & Coaxial 1.5 mm thick
2. SMT HEADERS Suit all Sockets
Each header can connect to three different sockets (cable, FPC,
and fine coaxial cable type.
(Note: Fine coaxial cable type is under development.)
3. Standardised Outer Dimensions
The three sockets have the same outside dimensions to allow
complete Flexibility.
4. Many Variations
There are headers of the on-board, offset, and reverse offset types
to accommodate all designs.
5. Connection to a Metal GROUND Plate
Ground lines can be connected to a metal shell for shielding.
■Application
LCDs, notebook personal computers, small OA machines, and small consumer products
,,,,
,,,,
,,
,
,,,
,,,,,,
,,,,,,
,,,,
,,,
,,,,,,,,,,,,,,,,
,,,,,,,
,,,,,,,,,,,,,,
,,,,,
,,,,
,,,,
,,,,,,,
,,,,
,,,,,,,
Drawing of mated connectors
on a DF19KR- *P-1H board
,,,,
,,
,,,,
,,
,
,
,,
,,,,,
,,,,
,,
,,
,
,,,
,,,,,,,
,,,,,,,,,,,,,,,,
,,,,,,,
,,,,
,,,,
,,,,,,,,,,,,,,
,,,,,,,,,,,,,,
2000.5
1
■Product Specifications
Rated current AWG#28 : 1A
AWG#30 : 0.5A
AWG#32 : 0.3A
Rating
FPC
Operating temperature range
-35~85ç Note 1
Operating humidity range
-20~80%
Storage temperature range
-10~60ç Note 2
Storage humidity range
-40~70%
-35~85ç Note 2
: 0.5A
Fine coaxial cable AWG# 40: 0.3A
Rated voltage AC100V
Item
Specification
Conditions
1.Insulation resistance
500MW or more
Measure at DC100V.
2.Voltage proof
No flashover or breakdown
300 V AC, applied for one minute.
3.Contact resistance
30mW or less (50mW or less for FPC)
Measure at 100 mA.
4.Insertion-Extraction Force
(per Contact)
MIN 0.2N (20gf), MAX 3N (300gf)
Measure with a steel pin with thickness of 0.2±0.005.
5.Vibration
No electrical discontinuity for 1µs or more
6.Damp heat
Contact resistance: specified value or less, insulation resistance: 500MW or more
Frequency: 10 Hz to 55 Hz, amplitude of 0.75 mm in 3 directions, 2h
Temperature of 40±2–C, humidity of 90% to 95%, duration 96h
7.Temperature Cycling
Contact resistance: specified value or less, insulation resistance: 500MW or more
(-55-C: 30 min -> 5-C to 35-C: 10 min -> 85-C: 30 min -> 5-C to 35-C: 10 min ) 5 cycles
8.Mechanical operation
Contact resistance: specified value or less
50 mechanical-operation cycles
9.Resistance to soldering heat
No melting of resin portion, which affects performance
Reflow: At the recommended temperature profile, manual soldering: iron temperature 300-C for 3s
Note1: Includes the temperature rise due to current flow.
Note2: The term storage refers to unused products prior to PCB mounting that is being stored for long periods.
The operating temperature and humidity range are applicable to connectors not carrying current. After PCB assembly or
temporary storage during transportation.
Note3: The aforementioned specifications are representative of this series. For information on specific parts, confirm with Sales Office.
■Material
Product
Pin header
Socket
Crimp-Contact
FPC socket
Ground plate for FPC
Socket for fine coaxial cables
Ground plate for fine coaxial cables
Note1: Tinning is Whisker free
2
Part
Material
Color / Finish
UL standard
Insulation
Polyamide resin
Grey
UL94V-0
Terminal
Phosphor bronze
Selective Gold Plating
----------
Ground Plate
Phosphor bronze
Tin Plated
----------
Insulation
Polyamide resin
Grey
UL94V-0
Ground Plate
Stainless steel
Tin Plated
----------
Terminal
Phosphor bronze
Gold Plated
----------
Insulation
Polyamide resin
Grey
UL94V-0
Terminal
Phosphor bronze
Selective Gold Plating
----------
Ground Plate
Stainless steel
Tin Plated
----------
Insulation
LCP resin
Grey
UL94V-0
Terminal
Phosphor bronze
Selective Gold Plating
----------
Ground Plate
Phosphor bronze
Tin Plated
----------
Ground Plate
Phosphor bronze
Tin Plated
----------
■Part Number Construction
The type name DF19 represents a specific product specification.
To order a product, specify the type from pages 4 to 9.
●Connector
DF 19 # - * P - 1 H
1
2
3
4
5
6
7
DF 19 # - * S - 1 F - GND
1
2
3
4
1 Series Name : DF
2 Series No. : 19
3 Profile :
■Pin header
G : On-board type (1.65 mm from the board)
K : Offset type (1.0 mm from the board)
L : Offset type (1.1 mm from the board)
KR : Reverse offset type of DF19K
(1.0 mm from the board)
■Crimp socket
None : Without grounding shell
G : With grounding shell (protected for EMI)
■FPC socket
G : Specification for connection with ground
shell
■Ground plate for FPC
G : Specification for connection with ground
shell
■Socket for coaxial fine cables
G : Specification for connection with ground shell
■Ground plate for fine coaxial cables
G : Specification for connection with ground shell
5
6
7
8
4 Number of contacts : 8,14,20,30... (Note 1)
5 Connector type
S : Single row socket
P : Single row pin header
6 Contact pitch : 1mm
7 Wiring type / terminal profile
H : Right angle SMT
C : Crimp socket
F : FPC socket
SD : Socket for fine coaxial cables
8 Part for installation
GND : Ground plate (Note 2)
(Note 1) Be careful, as the number of contacts differ depending on the profile.
(Note 2) The FPC and coaxial fine cable types always use a ground plate.
●Terminal
DF19 - 2830 SCF A (* *)
1
2
1 Symbol
2830 : AWG#28~30
3032 : AWG#30~32
2 Type
SCF : Socket contact reel Packaging
3
4
3 Plating
A : Gold plating
4 Specification
None : 10 000 pieces per reel
41 : 20 000 pieces per reel
3
■Right Angle Pin Header (SMT)
(On-board Type)
Assembled Header
BRecommended PCB Layout
,,,,,,,,,,,,
,,,,,,,,,,,,
,,,,,,,,,,,,
,,,,,,,,,,,,
Note1:
Masked area (hatched). Pattern in this area must be protected by resist.
Specification No.* *, (* *)
(59): Gold plating, Tape and reel packaging
Product No.
HRS No.
Number of poles
A
(
)
8
11.55
DF19G-18P-1H * * CL685-0021-0-* *
14
17.55
DF19G-14P-1H (* *) CL685-0004-0-* *
(
)
20
23.55
DF19G-20P-1H * * CL685-0006-6-* *
30
33.55
DF19G-30P-1H (* *) CL685-0015-7-* *
B
C
Width of emboss
7
11.95
24
13
17.95
44
19
23.95
44
Unit: mm
Remarks
1.65 mm from the
board
29 33.95
44
Note1: Specify the number of reels to order tape and reel packaging (1 000 pieces per reel).
4
■Right Angle Pin Header (SMT)
(Offset Type)
Assembled Header
BRecommended PCB Layout
Specification No.* *, (* *)
(59): Gold plating
C
D
E
Width of emboss
Unit: mm
Remarks
Product No.
HRS No.
Number of poles
A
B
DF19K-20P-1H (* *)
DF19K-30P-1H (* *)
CL685-0008-1-* *
20
23.55
19
26.55 24.15 25.15
44
CL685-0032-6-* *
30
33.55
29
36.55 34.15 35.15
56
1.0 mm from the
board
Width of emboss
Remarks
Product No.
HRS No.
Number of poles
A
B
DF19L-14P-1H (* *)
DF19L-20P-1H (* *)
CL685-0003-8-* *
14
17.55
13
20.55 18.15 19.15
44
CL685-0019-8-* *
20
23.55
19
26.55 24.15 25.15
44
DF19L-30P-1H (* *)
CL685-0016-0-* *
30
33.55
29
36.55 34.15 35.15
56
C
D
E
1.1 mm from the
board
Note1: Specify the number of reels to order tape and reel packaging (1 000 pieces per reel).
5
■Right Angle Pin Header (SMT)
(Reverse Offset Type)
Assembled Header
■Recommended PCB Layout
Specification No.* *, (* *)
(59): Gold plating
6
Product No.
HRS No.
Number of poles
A
B
DF19KR-14P-1H (* *)
DF19KR-20P-1H (* *)
CL685-0024-8-* *
14
17.55
13
C
D
E
Width of emboss
20.55 18.15 19.15
44
20
23.55 19 26.55 24.15 25.15
CL685-0023-5-* *
Note1: Specify the number of reels to order tape and reel packaging (1 000 pieces per reel).
44
Unit: mm
Remarks
1.0 mm from the
board
■Single Row Socket (Discrete Wire)
DF19-*S-1C
DF19G-*S-1C
Assembled Socket
Specification No. * * ,(* *)
None: 1 pack (100 pieces)
Product No.
DF19 - 8S-1C (* *)
HRS No.
Number of poles A
CL685-0029-1-* *
(
)
DF19 -14S-1C * * CL685-0012-9-* *
DF19 -20S-1C (* *) CL685-0011-6-* *
DF19 -30S-1C (* *) CL685-0013-1-* *
B
8
11.5 7
14
17.5 13
20
23.5 19
Unit: mm
Product No.
HRS No.
Number of poles A
B
8
11.5 7
DF19G - 8S-1C (* *) CL685-0022-2-* *
(
)
14
17.5 13
DF19G -14S-1C * * CL685-0005-3-* *
20
23.5 19
DF19G -20S-1C (* *) CL685-0007-9-* *
30
33.5 29
DF19G -30S-1C (* *) CL685-0014-4-* *
Note1: Products are sold in bulk packs. To order, specify the number of packs (100 pieces per pack).
30
33.5 29
■Socket Crimp Contact
Product No.
HRS No.
Type
Quantity
Color / Finish
DF19-2830SCF (* *)
DF19-3032SCF (* *)
685-0001-2-
Reel terminal
10,000 pieces per reel
Gold plating
685-0002-5-41 Reel terminal
20,000 pieces per reel
Gold plating
Specification No. * * ,(* *)
None : 1 Reel 10,000 pieces per reel
(41) : 1 Reel 20,000 pieces per reel
●Applicable Wire (tinned soft conductor)
Applicable wire size (core wire composition)
Sheath diameter
AWG#28 (7 strands/0.127 mm)
AWG#30 (7 strands/0.1 mm)
Ø0.5 ~ Ø0.6mm
AWG#32 (7 strands/0.08 mm)
●Recommended Wire
●UL1571
●Strip Length
●1.2~1.9mm
Note1: Please contact us when you use wires other than those specified in the table.
●Recommended Crimp Tooling
Type
Product No.
HRS No.
Applicator
AP105-DF19S
CL901-4571-3
Press
CM-105
CL901-0005-4
Manual crimping tool
HT302/DF19S
CL550-0284-7
Note1: Product is not guaranteed when non-specified tools are used.
Note2: Terminals are cut for manual crimping tool use.
7
■Single Row Socket (For FPC Cable)
Note1: Wiring of FPC requires a socket and a ground plate.
,,,,,,,,,,,,,,,
,,,,,,,,,,,,,,,
,,,,,,,,,,,,,,,
,,,,,,,,,,,,,,,
,,,,,,,,
,,,,,,,,
,,,,,,,,
,,,,,,,,
,,,,,,,,
,,,,,,,,
Assembled Socket
Product No.
HRS No.
Number of Contacts A
14
17.5
DF19G-14S-1F (* *) CL685-0017-2-* *
)
(
20
23.5
DF19G-20S-1F * * CL685-0009-4-* *
30
33.5
DF19G-30S-1F (* *) CL685-0033-9-* *
Unit: mm
E
B
C
D
17.1
13
15.6
14
23.1
19
21.6
20
33.1
29
31.6
30
Specification No. * *, (* *)
None: 1 pack (100 pieces)
Note1: Products are sold in bulk packs. To order, specify the number of packs (100 pieces per pack).
■Ground Plate for FPC
Product No.
HRS No.
Number of Contacts
A
Note1:See page 12 for the
assembling method.
Unit: mm
B
C
DF19G-14S-1F-GND (* *) CL685-0018-5-* *
14
14.4 14.35 15.75
DF19G-20S-1F-GND (* *) CL685-0010-3-* *
20
20.4 20.35 21.75
DF19G-30S-1F-GND (* *) CL685-0034-1-* *
30
30.4 30.35 31.75
Specification No. * *, (* *)
None: 1 pack (100 pieces)
Note1: Products are sold in bulk packs. To order, specify the number of packs (100 pieces per pack).
●Applicable Assembling Tools
Type
Product No.
HRS No.
Desk-top tool (for 14 core wires) DF19G-14S/PR-MD2
CL902-4514-6
Desk-top tool (for 20 core wires) DF19G-20S/PR-MD2
CL902-4513-3
Desk-top tool (for 30 core wires) DF19G-30S/PR-MD2
CL902-4518-7
Note1: Product is not guaranteed unless Hirose approved tools are used.
8
■Single Row Socket (Fine Coaxial Cable) ... (Under development)
Specification No. * *, (* *)
None: 1 pack (100 pieces)
Product No.
DF19G-14S-1SD (* *)
HRS No.
Number of poles
-----------
14
----------20
DF19G-20S-1SD (* *)
Note1: The products will be sold in bulk packs (100 pieces per
pack). To order, specify the number of packs.
●Applicable Wire (Fine Coaxial Cable) ... Planned
Applicable wire size (core wire composition) Sheath diameter
Assembled Coaxial Socket
AWG#40(7strands/0.03mm)
Ø0.3 ~ Ø0.4mm
9
BDrawing of Tape and Reel Dimensions (as per JIS-C-0806)
●DF19G-*P-1H
●DF19K-*P-1H
●DF19L-*P-1H
●DF19KR-*P-1H
Unit: mm
Insertion connector Number of Contacts
10
A
B
C
D
E
F
Remarks
DF19G -18P-1H
08
24
--------
11.5
16.1
24.4
30.4
DF19G -14P-1H
14
44
40.4
20.2
22.1
44.4
50.4
DF19G -20P-1H
20
44
40.4
20.2
28.1
44.4
50.4
DF19G -30P-1H
30
56
50.2
26.2
38.1
56.4
62.4
DF19K -20P-1H
20
44
40.4
20.2
28.1
44.4
50.4
DF19K -30P-1H
30
56
52.4
26.2
38.1
56.4
62.4
DF19L -14P-1H
14
44
40.4
20.2
22.1
44.4
50.4
DF19L -20P-1H
20
44
40.4
20.2
28.1
44.4
50.4 Offset type (1.0 mm from the board)
DF19L -30P-1H
30
56
52.4
26.2
38.1
56.4
62.4
DF19KR -14P-1H
14
44
40.4
20.2
22.1
44.4
50.4
DF19KR -20P-1H
20
44
40.4
20.2
28.1
44.4
50.4
On-board type (1.65 mm from the board)
Offset type (1.0 mm from the board)
Reverse offset type
of DF19K (1.0 mm from the board)
BSoldering Temperature Profile
1. Recommended temperature profile
(Note 1) The temperature profile can be applied twice with the normal temperature profile.
(Note 2) The temperature is measured at the connector lead.
2. Recommended manual soldering conditions
Soldering iron temperature 290 ±10ç, soldering time 3 seconds or less
3. Recommended screen thickness
0.15mm
4. Warpage of board
Max. 0.03mm at the connector center with the connector ends as the reference.
5. Cleaning
See the separate “Guide to Hirose Nylon connectors.”
6. Wiring
See the separate “Guide to Hirose Nylon connectors.”
■ As crimp terminals are extremely small, crimping must be performed with care: observe
the directions in the “Crimping Condition Sheet” and “Crimping Standard Sheet.”
7. Precautions
■ Due to the ultra miniature design care needs to be taken when disconnecting to avoid
accidental damage.
11
BAssembly Procedure for FPC Socket
,,,,
,,,,,
,,,,,
,,,,,
,,,,
,,,,
,,,,,
,,,,,
,,,,,
,,,,
,,,,
,,,,,
,,,,,
,,,,,
,,,,
,,,,,
,,,,,
,,,,,,,,
,,,,,,,,
,,,,
,,,,
,,,,,,,,
,,,,
,,,,,,,,,,,,,
,,,,,,,,,,,,,
,,,,,,,,
,,,,,,,,
,,,,
,,,,
,,,,
,,,,,
,,,,,
,,,,,
Note1:The ground plate and the socket are sold separately.
Note2:Use the special tool for assembling.
Note3:To insert the ground plate, lift the FPC about 30° to make a space for insertion. Don’t apply excessive force (bending or
gouging, as the FPC copper foil (end of the cover film) will crack.
Note4:If the ground plate doesn’t enter the socket, don’t apply excessive force, but check whether it is parallel with the socket.
Note5:To protect the FPC, insert or pull out the connector in parallel with the engagement plane.
Note6:To protect the FPC, don’t apply excessive tension.
Note7:To bend the FPC, observe the allowable R and other conditions recommended by the manufacturer, and keep a distance
between the bending point and the socket as shown in the illustration below.
Note8:To assemble the FPC to the socket, use the recommended jigs and tools and be careful not to be injured by the
edge of the metallic part of the connector. Observe the instructions given in the manual for wiring jigs and tools.
12
The contents of this catalog are current as of May 2000 Contents are subject to change without notice for the purpose of improvements.
Similar pages