Hirose DF22B-4S-7.92C 7.92mm contact pitch high-current connectors for internal Datasheet

7.92mm Contact Pitch High-Current Connectors for Internal
Power Supplies (UL, C-UL and TÜV Listed)
DF22 Series
Positive
Lock
Completely
enclosed
locking system
Nov.1.2016 Copyright
Jan.1.2017
Copyright 2017
2016 HIROSE
HIROSE ELECTRIC
ELECTRIC CO.,
CO., LTD.
LTD. All
All Rights
Rights Reserved.
Reserved.
Protection from
shorts circuits
between adjacent
contacts
Fig.1
■Features
1. Rated up to 30A
Single position connector can carry current of 30A with 10
AWG conductor. Please refer to Table #1 for current ratings for
multi-position connectors using other conductor sizes.
Keying for multiple use
●R Type (Guide key : right side, Color : black)
2. Positive Locking Function
Reliable interior lock protects mated connectors from
accidental disconnection. (Fig.1)
3. Prevention of Incorrect Connections
To prevent incorrect connection when using multiple connectors
having the same Number of contacts, 3 product types having
different mating configurations are available. (Fig.2)
4. Molded-in contact retention tabs
Handling of terminated contacts during the crimping is
easier and avoids entangling of wires, since there are
no protruding metal tabs.
●Standard Type (Guide key : inside, Color : natural)
5. Prevention of incorrect board placement
Built-in posts assure correct connector placement and
orientation on the board.
6. Supports resin sealing
Allows potting up to 10mm.
7. Prevention of Short Circuits Between
Adjacent Contacts
●L Type (Guide key : left side, Color : red)
Each Contact is completely surrounded by the housing
wall electrically isolating it from adjacent contacts.
8. Increased Retention Force of Crimped
Contacts
Improved pull-out force design.
9. Full Line of Crimp Socket Contacts
Hirose has released DF22C-*S-7.92C which has easy
to push/release latch design. and DF22B-*S-7.92C/
DF22C-*S-7.92C which has improved electrical
insulation properties.
10. In-line Connections
Wire-to-wire connection is also available. Space is saved
with 2-row (2×2) layout for 4 pos.
*The image on the left show header (the board dip
side), the image on the right show the socket
(cable side).
*The guide key position is indicated in position
facing the mating surface of the header.
Fig.2
11. UL, C-UL, and TÜV Certified.
12. Glow Wire compliance (Compliant with IEC 60695-2-11)
2016.1e
1
DF22 Series●7.92mm Contact Pitch High-Current Connectors for Internal Power Supplies (UL, C-UL and TÜV Listed)
■Product Specifications
No. of contacts 10 AWG
1
30A
Current
2
25A
rating
3
25A
(Note 1)
Ratings
4
22A
5
22A
Specification
Voltage
UL/C-UL
rating
TÜV
Nov.1.2016 Copyright
Jan.1.2017
Copyright 2017
2016 HIROSE
HIROSE ELECTRIC
ELECTRIC CO.,
CO., LTD.
LTD. All
All Rights
Rights Reserved.
Reserved.
Item
12 AWG
14 AWG
16 AWG
20A
15A
18A
15A
18A
15A
15A
13A
15A
13A
AC/DC 1000V
AC/DC
600V
AC/DC
600V
25A
20A
20A
18A
18A
Operating temperature range -35ç to 85ç (Note 2)
Operating humidity range 20% to 80%
Storage temperature range -10ç to 60ç (Note 3)
Storage humidity range 40% to 70% (Note 3)
UL/C-UL/TÜV File No. and Recognition No.
UL
C-UL
TÜV
Specifications
: E52653
: E52653
: R9950703
Conditions
1. Contact Resistance
No more than 5mø
Measured at 1mA and no higher than 20mV
2. Insulation Resistance
No less than 1,000Mø
Measured at DC=1000V
3. Withstand Voltage
No flashover or breakdown
AC 2500 V is applied for one minute.
Measured with a steel pin of 1.6 x 0.8 ± 0.002 thickness
4. Contact Insertion and Extraction Forces 0.3N min., 5N max
5. Durability
Contact resistance : no more than 10mø
30 mating cycles
6. Vibration Resistance
No electrical discontinuity of 1µs or greater
Frequency 10-55 Hz, half amplitude 0.75 mm, 10 times in each of the three directions
7. Shock Resistance
No electrical discontinuity of 1µs or greater
Accelerated velocity : 490 m/s2 for 11 ms, half-sine wave in 3 directions, 3 times for each direction
8. Moisture-Resistance
Contact resistance : no more than 10mø
Temperature : 40 ± 2ç ; humidity : 90 to 95%, left as it is for 96 hours
9. Temperature cycles
Contact resistance : no more than 10mø
(-55ç : 30 minutes➝ 5 to 35ç : 5 minutes➝ 85ç : 30 minutes➝ 5 to 35ç : 5 minutes) for 5 cycles
10. Solder heat Resistance
The resin parts should withstand the
temperature and resist melting.
Flow : 250ç, 10 sec
Hand soldering : temperature of soldering iron at 300ç for 3 seconds
Note 1 : Current rating of header is 30A (1 pos.), 25A (2 to 3 pos.) and 22A (4 to 5 pos.)
Note 2 : Includes temperature rise caused by current flow.
Note 3 : The storage condition refers to long-term storage of the product on the shelf before assembly. Please use the operating
temperature for temporary storage such as pre-assembly and during shipping.
■Materials / Finish
Product
Part
Material
Finish
Sockets
Insulator
Polyamide
Crimp contacts
Contacts
High conductivity copper alloy
Tin-lead plated or Gold plated
Insulator
Polyamide (Glass reinforced)
Color : Natural beige
Contacts
High conductivity copper alloy
Tin-copper plated or Gold plated
Headers
Color : Natural white
Remarks
(Note)
(Note)
UL94V-0
---------UL94V-0
----------
Note : Standard Color, colors of the differing coupling forms are black for DF22R and red for DF22L.
■Product Number Structure
●Socket, Header
●Contacts
DF22 B L - 2 S - 7.92 C (**)
q
w
e
r
t
u
q
q Series name : DF22
w Form Type
r Number of contacts : 1 to 5
t Connector type
Sockets
Blank : Standard height, standard lock (Type I)
B : Long type, standard lock (Type III)
C : Long type, ergonomic lock (Type IV)
In-line Plugs
Blank : With panel stop
A : Without panel stop
e Guide key type
S
: Socket
DS
: Double-row socket
P
: Header
EP
: In-line plug
DEP
: Double-row in-line plug
RS/P
: Retainer
y Contact pitch : 7.92 mm
u Type of housing
C
: Crimp housing
DSA
: Straight header
DS
: Right-angle header
No letter : Retainer
Blank : Inside (Color: natural)
R : Right side (Color: black)
L : Left side (Color: red)
2
y
DF22 A - 1416 SCF A
i
o
!0
!1
i Applicable Cable
Blank : UL1430
A
: UL1015
o Applicable Conductor
1416 : 14 to 16 AWG
1012 : 10 to 12 AWG
!0 Packaging
SCF : Socket contacts / reel
SC : Socket contacts / pack
PCF : In-line plug contacts / reel
PC : In-line plug contacts / pack
!1 Plating specifications
Blank : Tin plated
A
: Gold plated
DF22 Series●7.92mm Contact Pitch High-Current Connectors for Internal Power Supplies (UL, C-UL and TÜV Listed)
Shown with terminated and contacts installed.
1 Pos.
Shown with terminated and contacts installed.
A
2 to 5 Pos.
8
B
Type 1
Standard lock
7.7
Type 1
Standard lock
10.4
7.7
P=7.92
(11.55)
No. of contacts
indicator
Cavity No.
A
(11.55)
14.5
20
14.5
Contact No. 1
20
Nov.1.2016 Copyright
Jan.1.2017
Copyright 2017
2016 HIROSE
HIROSE ELECTRIC
ELECTRIC CO.,
CO., LTD.
LTD. All
All Rights
Rights Reserved.
Reserved.
■Crimp Sockets (Standard Height Type)
Polarity
mark
1
A
Cavity No.
3
No. of contacts
indicator
■ Type I
Height : Standard type, Standard lock
Note : The part number and HRS No. have changed to reflect the
product form change of the 2 to 5 pos. types.
Standard Type (Guide Key : Inside, Color : White) Unit : mm
Part No.
DF22-1S-7.92C(28)
DF22-2S-7.92C(28)
DF22-3S-7.92C(28)
DF22-4S-7.92C(28)
DF22-5S-7.92C(28)
HRS No.
680-1012-2 28
680-1004-4 28
680-1005-7 28
680-1006-0 28
680-1007-2 28
No. of Contacts
1
2
3
4
5
A
B
8.00 ----15.50 7.92
23.42 15.84
31.34 23.76
39.26 31.68
R Type (Guide Key : Right Side, Color : Black)
Part No.
DF22R-1S-7.92C(28)
DF22R-2S-7.92C(28)
DF22R-3S-7.92C(28)
DF22R-4S-7.92C(28)
DF22R-5S-7.92C(28)
HRS No.
680-1026-7 28
680-1027-0 28
680-1028-2 28
680-1029-5 28
680-1030-4 28
No. of Contacts
1
2
3
4
5
L Type (Guide Key : Left Side, Color : Red)
Part No.
DF22L-1S-7.92C(28)
DF22L-2S-7.92C(28)
DF22L-3S-7.92C(28)
DF22L-4S-7.92C(28)
DF22L-5S-7.92C(28)
HRS No.
680-1031-7 28
680-1032-0 28
680-1033-2 28
680-1034-5 28
680-1035-8 28
No. of Contacts
1
2
3
4
5
Unit : mm
A
B
8.00 ----15.50 7.92
23.42 15.84
31.34 23.76
39.26 31.68
Unit : mm
A
B
8.00 ----15.50 7.92
23.42 15.84
31.34 23.76
39.26 31.68
Note 1 : Bag packaging (100 pcs/pack). Order by number of packs.
Note 2 : Every even number position has a different locking design.
3
DF22 Series●7.92mm Contact Pitch High-Current Connectors for Internal Power Supplies (UL, C-UL and TÜV Listed)
■Crimp Sockets (Height, Long Type)
1 Pos.
Shown with terminated and contacts installed.
2 to 5 Pos.
A
B
7.7
Type 4
Height : Long type,
user-friendly
operation
Type 3
Height : Long type,
Standard lock
Contact No. 1
(12.75)
23
23
14.5
Type 4
Height : Long type,
user-friendly operation
10.4
7.7
P=7.92
8
No. of contacts
indicator
Cavity No.
(12.75)
(11.55)
14.5
Nov.1.2016 Copyright
Jan.1.2017
Copyright 2017
2016 HIROSE
HIROSE ELECTRIC
ELECTRIC CO.,
CO., LTD.
LTD. All
All Rights
Rights Reserved.
Reserved.
Shown with terminated and contacts installed.
Polarity
mark
A
A
1
Cavity No.
■ Type III
Height : Long type, Standard lock
HRS No.
680-1097-5
680-1098-8
680-1099-0
680-1100-8
No. of Contacts
2
3
4
5
No. of contacts
indicator
■ Type IV
Height : Long type, Enhanced ergonomic lock
Standard Type (Guide Key : Inside, Color : White) Unit : mm
Part No.
DF22B-2S-7.92C
DF22B-3S-7.92C
DF22B-4S-7.92C
DF22B-5S-7.92C
3
A
B
15.50 7.92
23.42 15.84
31.34 23.76
39.26 31.68
Note 1 : Bag packaging (100 pcs/pack). Order by number of packs.
Note 2 : Every even number position has a different locking design.
Standard Type (Guide Key : Inside, Color : White) Unit : mm
Part No.
DF22C-1S-7.92C
DF22C-2S-7.92C
DF22C-3S-7.92C
DF22C-4S-7.92C
HRS No.
680-1101-0
680-1102-3
680-1103-6
680-1104-9
No. of Contacts A
B
1
8.00 ----2
15.50 7.92
23.42 15.84
3
4
31.34 23.76
R Type (Guide Key : Right Side, Color : Black) Unit : mm
Part No.
DF22CR-3S-7.92C
HRS No.
680-1130-9
No. of Contacts A
B
3
23.42 15.84
L Type (Guide Key : Left Side, Color : Red)
Part No.
DF22CL-1S-7.92C
DF22CL-3S-7.92C
HRS No.
680-1133-7
680-1135-2
Unit : mm
No. of Contacts A
B
1
8.00 ----3
23.42 15.84
Note 1 : Bag packaging (100 pcs/pack). Order by number of packs.
Note 2 : Every even number position has a different locking design.
4
DF22 Series●7.92mm Contact Pitch High-Current Connectors for Internal Power Supplies (UL, C-UL and TÜV Listed)
1 Pos.
2 to 5 Pos.
A
12.45
9.7
Cavity No.
12.45
1.5
4.05
9.3
A
B
No. of contacts
indicator
3
10.8
Cavity No.
A
1.4
0.8
3.7
2.3
3.2
9
18.1
18.1
Polarity
mark
3.7
8.7
3.9
10.8
3.2
1
No. of contacts
indicator
Ø1.5
0.8
3.45
4.35
[Specification number]
(05) : Tin-copper plated bag packaging
(25) : Tin-copper plated tray packaging (only 1 pos)
(06) : Gold plated, bag packaging
Unit : mm
B Bag Packaging Tray Packaging Tin-copper plated Gold plated
------------✓
✓
7.92
----✓
✓
✓
15.84
----✓
✓
✓
23.76
--------✓
✓
31.68
--------✓
✓
R Type (Guide Key : Right Side, Color : Black)
Part No.
DF22R-1P-7.92DSA(**)
DF22R-2P-7.92DSA(**)
DF22R-3P-7.92DSA(**)
DF22R-4P-7.92DSA(**)
DF22R-5P-7.92DSA(**)
HRS No. No. of Contacts
680-1036-0 **
1
680-1037-3 **
2
680-1038-6 **
3
680-1039-9 **
4
680-1040-8 **
5
A
----17.22
25.14
33.06
40.98
B
----7.92
15.84
23.76
31.68
Unit : mm
Bag Packaging Tray Packaging Tin-copper plated Gold plated
--------✓
✓
--------✓
✓
--------✓
✓
--------✓
✓
--------✓
✓
BRecommended PCB Layout
(Board thickness : 1.6±0.1)
1 Pos.
11.1±0.1
8.5
2.5 +0.1
0
2-R0.5
2 to 5 Pos.
L Type (Guide Key : Left Side, Color : Red)
(#)*¤%#%*
% %#&
Unit : mm
B Bag Packaging Tray Packaging Tin-copper plated Gold plated
------------✓
✓
7.92
--------✓
✓
15.84
--------✓
✓
23.76
--------✓
✓
31.68
--------✓
✓
+
&#
&
%#
%
¢
,
A
----17.22
25.14
33.06
40.98
&#
HRS No. No. of Contacts
680-1041-0 **
1
680-1042-3 **
2
680-1043-6 **
3
680-1044-9 **
4
680-1045-1 **
5
"¢
Part No.
DF22L-1P-7.92DSA(**)
DF22L-2P-7.92DSA(**)
DF22L-3P-7.92DSA(**)
DF22L-4P-7.92DSA(**)
DF22L-5P-7.92DSA(**)
+0.1
--0.2
3.2±0.05
A
----17.22
25.14
33.06
40.98
3.4±0.1
HRS No. No. of Contacts
680-1013-5 **
1
680-1014-8 **
2
680-1015-0 **
3
680-1016-3 **
4
680-1017-6 **
5
E2,#.'¤%#%*
7¤%#%*
)#(*¤%#%*
Part No.
DF22-1P-7.92DSA(**)
DF22-2P-7.92DSA(**)
DF22-3P-7.92DSA(**)
DF22-4P-7.92DSA(**)
DF22-5P-7.92DSA(**)
1+0.1
0
Standard Type (Guide Key : Inside, Color : Natural Beige)
Nov.1.2016 Copyright
Jan.1.2017
Copyright 2017
2016 HIROSE
HIROSE ELECTRIC
ELECTRIC CO.,
CO., LTD.
LTD. All
All Rights
Rights Reserved.
Reserved.
■Straight Header
Note 1 : Bag packaging (100 pcs/pack). Order by number of packs.
Note 2 : Tray packaging (150 pcs/tray). Order by number of 150.
Note 3 : Every even number position has a different locking design.
Note 4 : Please contact Hirose representative if you have request for non-standard Au plating.
5
DF22 Series●7.92mm Contact Pitch High-Current Connectors for Internal Power Supplies (UL, C-UL and TÜV Listed)
A
B
C
P=7.92
1.6
0.8
15.2
24
17.6
9
Contact No.1
Ø1.5
3.5
12.2
9.45
■Right Angle Header
A
5
Cavity No.
No. of contacts
indicator
Standard Type (Guide Key : Inside, Color : Natural Beige) Unit : mm
HRS No. No. of Contacts
680-1008-5 **
2
680-1009-8 **
3
680-1010-7 **
4
680-1011-0 **
5
A
19.80
27.72
35.64
43.56
B
C Tin-copper plated Gold plated
15.00 7.92
(35)
(36)
22.92 15.84
(05)
(06)
30.84 23.76
(05)
----38.76 31.68
(05)
(06)
R Type (Guide Key : Right Side, Color : Black)
Part No.
DF22R-2P-7.92DS(**)
DF22R-3P-7.92DS(**)
DF22R-4P-7.92DS(**)
DF22R-5P-7.92DS(**)
HRS No. No. of Contacts
680-1018-9 **
2
680-1019-1 **
3
680-1020-0 **
4
680-1021-3 **
5
A
19.80
27.72
35.64
43.56
Unit : mm
B
C Tin-copper plated Gold plated
15.00 7.92
(05)
----22.92 15.84
(05)
(06)
30.84 23.76
(05)
----38.76 31.68
(05)
-----
HRS No. No. of Contacts
680-1022-6 **
2
680-1023-9 **
3
680-1024-1 **
4
680-1025-4 **
5
A
19.80
27.72
35.64
43.56
1.2
[specification number]
(05), (35) : Tin-copper plated
(06), (36) : Gold plated
BRecommended PCB Layout
(Board thickness : 1.6±0.1)
B±0.05
2-
L Type (Guide Key : Left Side, Color : Red)
Part No.
DF22L-2P-7.92DS(**)
DF22L-3P-7.92DS(**)
DF22L-4P-7.92DS(**)
DF22L-5P-7.92DS(**)
5
Unit : mm
B
C Tin-copper plated Gold plated
15.00 7.92
(05)
(06)
22.92 15.84
(05)
(06)
30.84 23.76
(05)
----38.76 31.68
(05)
(06)
C±0.05
Ø1
.6
P=7.92±0.05
+0
0 .1
15.2±0.05
Nov.1.2016 Copyright
Jan.1.2017
Copyright 2017
2016 HIROSE
HIROSE ELECTRIC
ELECTRIC CO.,
CO., LTD.
LTD. All
All Rights
Rights Reserved.
Reserved.
Part No.
DF22-2P-7.92DS(**)
DF22-3P-7.92DS(**)
DF22-4P-7.92DS(**)
DF22-5P-7.92DS(**)
3.7
Note 1 : Bag packaging (100 pcs/pack). Order by number of packs.
Note 2 : Every even number position has a different locking design.
Note 3 : Please contact Hirose representative if you have request for
non-standard Au plating.
1
0.
+ 0
5
.
Ø1
-
*
■In-line Plug
1 Pos.
2, 3 Pos.
9.3
A
9.97
34.95
34.95
No. of contacts
indicator
No. of contacts
indicator
Cavity No.
12.72
Shown with terminated
and contacts installed.
12.72
Shown with terminated
and contacts installed.
A
B
Contact No.1
1
10.5
3
3
Standard Type (Guide Key : Inside, Color : Natural Beige)
Part No.
DF22A-1EP-7.92C
DF22A-2EP-7.92C
DF22A-3EP-7.92C
HRS No.
680-1053-0
680-1054-2
680-1055-5
No. of Contacts
1
2
3
A
9.30
18.00
26.00
L Type (Guide Key : Left Side, Color : Red)
Unit : mm
B
----7.92
15.84
Unit : mm
Part No.
HRS No.
No. of Contacts
A
B
DF22AL-2EP-7.92C 680-1074-0
2
18.00
7.92
Note 1 : Bag packaging (100 pcs/pack). Order by number of packs.
Note 2 : Every even number position has a different locking design.
6
Cavity No.
A
2
Polarity
mark
1
R Type (Guide Key : Right Side, Color : Black)
Part No.
DF22AR-2EP-7.92C
DF22AR-3EP-7.92C
HRS No.
680-1069-0
680-1070-9
No. of Contacts
2
3
A
18.00
26.00
Unit : mm
B
7.92
15.84
DF22 Series●7.92mm Contact Pitch High-Current Connectors for Internal Power Supplies (UL, C-UL and TÜV Listed)
Shown with terminated and contacts installed.
No. of contacts
indicator
No. of contacts
indicator
34.95
A 1
3
B
9.97
12.72
8.12
12.72
A
Contact No.1
Cavity No.
34.95
3
2, 3 Pos.
9.3
10.5
Cavity No.
A
3
20.7
1 Pos.
Shown with terminated and contacts installed.
20.7
Polarity
mark
3
16.3
Part No.
DF22L-1EP-7.92C
DF22L-2EP-7.92C
HRS No.
680-1063-3
680-1064-6
No. of Contacts
A
1
9.30
2
17.22
Unit : mm
B
C
----- 16.30
7.92 24.22
Note 1 : Bag packaging (100 pcs/pack). Order by number of packs.
Note 2 : Every even number position has a different locking design.
3.5±0.1
9.6+0.1
0
2, 3 Pos.
Panel thickness
2.0
1.6
1.2
0.8
X
0.48
0.96
1.44
1.92
(C-0.5-X) +0.1
0
(A+0.4) +0.1
0
11±0.2
3.5±0.1
L Type (Guide Key : Left Side, Color : Red)
(15.8-X) +0.1
0
4.16 +0.1
0
Unit : mm
No. of Contacts
A
B
C
17.22 7.92 24.22
2
25.14 15.84 32.14
3
1 Pos.
+0.1
4.835 0
HRS No.
680-1059-6
680-1060-5
BPanel Cutout
+0.1
0
R Type (Guide Key : Right Side, Color : Black)
Part No.
DF22R-2EP-7.92C
DF22R-3EP-7.92C
1
10.27
Unit : mm
No. of Contacts
A
B
C
1
9.30 ----- 16.30
2
17.22 7.92 24.22
3
25.14 15.84 32.14
13.02 +0.1
0
HRS No.
680-1048-0
680-1049-2
680-1050-1
+0.1
0
Standard Type (Guide Key : Inside, Color : White)
Part No.
DF22-1EP-7.92C
DF22-2EP-7.92C
DF22-3EP-7.92C
2
C
13.02
Nov.1.2016 Copyright
Jan.1.2017
Copyright 2017
2016 HIROSE
HIROSE ELECTRIC
ELECTRIC CO.,
CO., LTD.
LTD. All
All Rights
Rights Reserved.
Reserved.
■In-line Plug (Panel Lock Type)
Note 1 : Please ensure when mating this connector
that the tapered portions of the panel are
facing outward towards the receptacle
connector’s mating interface.
7
DF22 Series●7.92mm Contact Pitch High-Current Connectors for Internal Power Supplies (UL, C-UL and TÜV Listed)
■In-line Double-row Socket
20.14
17.44
15.5
7.92
23
14.5
Standard lock
Nov.1.2016 Copyright
Jan.1.2017
Copyright 2017
2016 HIROSE
HIROSE ELECTRIC
ELECTRIC CO.,
CO., LTD.
LTD. All
All Rights
Rights Reserved.
Reserved.
Shown with terminated and contacts installed.
Standard Type (Guide Key : Inside, Color : White)
Part No.
DF22B-4DS-7.92C
HRS No.
680-1142-8
No. of Contacts
4
Unit : mm
Lock type
Standard lock
(21.29)
Polarity
mark
Contact No.1
1
3
2
4
A
R Type (Guide Key : Right Side, Color : Black)
Part No.
DF22BR-4DS-7.92C
HRS No.
680-1156-2
No. of Contacts
4
Unit : mm
Lock type
Standard lock
Cavity No.
No. of contacts
indicator
L Type (Guide Key : Left Side, Color : Red)
Part No.
DF22BL-4DS-7.92C
HRS No.
680-1161-2
No. of Contacts
4
Unit : mm
Lock type
Standard lock
Note : Bag packaging (100 pcs/pack). Order by number of packs.
■In-line Double-row Plug
17.22
7.92
17.22
7.92
3
21.79
19.04
21.79
19.04
3
Contact No.1
Contact No.1
10.5
34.95
20.7
4
A
3
1
4
2
No. of contacts
indicator
Cavity No.
34.95
20.7
24.22
No. of contacts
indicator
10.5
Cavity No.
4
A
3
1
4
2
Shown with terminated and contacts installed.
Standard Type (Guide Key : Inside, Color : White)
Part No.
DF22-4DEP-7.92C
DF22A-4DEP-7.92C
HRS No.
680-1051-4
680-1056-8
Unit : mm
No. of Contacts
Connector type
4
With snap-in tabs
4
Without snap-in tabs
HRS No.
680-1170-3
No. of Contacts
4
Unit : mm
Connector type
With snap-in tabs
(23.72-X) +0.1
0
L Type (Guide Key : Left Side, Color : Red)
9.62+0.1
0
Note : Bag packaging (100 pcs/pack). Order by number of packs.
19.76 +0.1
0
11±0.2
6.3±0.1
Unit : mm
No. of Contacts
Connector type
4
With snap-in tabs
4
Without snap-in tabs
19.34 +0.1
0
HRS No.
680-1175-7
680-1189-1
22.09 +0.1
0
Part No.
DF22L-4DEP-7.92C
DF22AL-4DEP-7.92C
Polarity
mark
BRecommended Panel Cutout
(Panel mount type)
R Type (Guide Key : Right Side, Color : Black)
Part No.
DF22R-4DEP-7.92C
Polarity
mark
Panel thickness
2.0
1.6
1.2
0.8
X
0.48
0.96
1.44
1.92
17.62 +0.1
0
Note 1 : Please ensure when mating this connector
that the tapered portions of the panel are
facing outward towards the receptacle
connector’s mating interface.
8
DF22 Series●7.92mm Contact Pitch High-Current Connectors for Internal Power Supplies (UL, C-UL and TÜV Listed)
For Standard height, standard lock (Type I)
For Long type, standard lock (Type III)
Long type, enhanced ergonomic lock (Type IV)
Cavity No.
Cavity No.
A
A
A
B
A
B
2
8.6
3.2
Cavity No.
Cavity No.
A5
Part No.
DF22-2RS/P-7.92
DF22-3RS/P-7.92
DF22-4RS/P-7.92
DF22-5RS/P-7.92
Applicable Socket
7.92
11.6
2
7.92
3.2
Nov.1.2016 Copyright
Jan.1.2017
Copyright 2017
2016 HIROSE
HIROSE ELECTRIC
ELECTRIC CO.,
CO., LTD.
LTD. All
All Rights
Rights Reserved.
Reserved.
■Retainer
4
3
2
1
No. of contacts
indicator
Unit : mm
HRS No.
No. of Contacts
A
B
680-1209-7
2
15.50 7.92
680-1210-6
3
23.42 15.84
680-1211-9
4
31.34 23.76
680-1212-1
5
39.26 31.68
DF22-*S-7.92C For Standard height, standard lock
A5
Part No.
DF22B/C-2RS/P-7.92
DF22B/C-3RS/P-7.92
DF22B/C-4RS/P-7.92
DF22B/C-5RS/P-7.92
(Type I)
* indicates number of contacts.
Note : Bag packaging (100 pcs/pack). Order by number of
packs.
Applicable Socket
4
3
2
1
No. of contacts
indicator
Unit : mm
HRS No.
No. of Contacts
A
B
680-1200-2
2
15.50 7.92
680-1201-5
3
23.42 15.84
680-1202-8
4
31.34 23.76
680-1203-0
5
39.26 31.68
DF22B-*S-7.92C For Long type, standard lock (Type III)
DF22C-*S-7.92C Long type, enhanced ergonomic lock (Type IV)
DF22-*EP-7.92C
DF22A-*EP-7.92C
* indicates number of contacts.
Note 1 : Bag packaging (100 pcs/pack). Order by number of packs.
Note 2 : When connecting retainer into the plug housing, please
note the cavity numbers will line up numerieally, but the
retainer cavity numbers will be upside down compared to
the plug cavity numbers.
9
DF22 Series●7.92mm Contact Pitch High-Current Connectors for Internal Power Supplies (UL, C-UL and TÜV Listed)
BCrimp Contact for Socket
For 14 to 16 AWG
For 10 to 12 AWG
4.7
2.8
t=0.3
P=15.5
Part No.
HRS No.
DF22-1416SCF
DF22-1416SC
DF22A-1416SCF
DF22A-1416SC
DF22A-1012SCF
DF22A-1012SC
DF22-1416SCFA
DF22A-1416SCFA
680-1000-3
680-1001-6
680-1002-9
680-1003-1
680-1089-7
680-1090-6
680-1085-6
680-1087-1
DF22A-1012SCFA
680-1106-4
UL style
1430
1015
1430
1015
1.6 1.3 2.9 1.4
Ø2
Ø1
.5
4
0.8
1.6 1.5 2.7 1.4
21.8
17
20.8
3 0.8
Nov.1.2016 Copyright
Jan.1.2017
Copyright 2017
2016 HIROSE
HIROSE ELECTRIC
ELECTRIC CO.,
CO., LTD.
LTD. All
All Rights
Rights Reserved.
Reserved.
4.7
2.8
3.8
17
3.8
t=0.4
P=16.5
Applicable cable
Jacket diameter
Wire size
Stranded wire conductor
Ø2.4 to 3.0mm 16 AWG, 14 AWG 26/0.254mm,41/0.26mm
Ø2.6mm
16 AWG
26/0.254mm
Ø3.0 to 3.8mm
16 AWG
26/0.254mm
Ø3.2mm,Ø3.7mm
14 AWG
41/0.26mm
Ø3.6 to 4.9mm
12 AWG
65/0.26mm
Ø4.04mm,Ø4.69mm
10 AWG
104/0.26mm
16 AWG
26/0.254mm
Ø2.4 to 3.0mm
Ø3.0 to 3.8mm
14 AWG
41/0.26mm
12 AWG
65/0.26mm
Ø3.6 to 4.9mm
10 AWG
104/0.26mm
Packaging
2500/reel
100/pack
2000/reel
100/pack
2000/reel
100/pack
2500/reel
2000/reel
Finish
Tin plated
Gold plated
2000/reel
Note 1 : Applicable wire with tin plated solid soft conductor.
Note 2 : When using other than the recommended wire, contact your nearest Hirose representative.
Note 3 : Strip length: 3.5 to 4.5mm
BCrimp Contact for In-line Plug
4.7
2.8
1.6
0.8
1.4
25.2
29
3.8
Ø1
.5
1.6
3 0.8
1.5 2.7
1416
Part No.
DF22-1416PCF
DF22-1416PC
DF22A-1416PCF
DF22A-1416PC
DF22-1416PCFA
HRS No.
680-1078-0
680-1080-2
680-1079-3
680-1081-5
680-2002-4
UL style
1430
1015
1430
P=15.5
t=0.3
Applicable cable
Jacket diameter
Wire size
Stranded wire conductor
Ø2.4 to 3.0mm 16 AWG, 14 AWG 26/0.254mm,41/0.26mm
Ø2.6mm
16 AWG
26/0.254mm
Ø3.0 to 3.8mm
16 AWG
26/0.254mm
Ø3.2mm,Ø3.7mm
41/0.26mm
14 AWG
Ø2.4 to 3.0mm
Note 1 : Applicable wire with tin plated solid soft conductor.
Note 2 : When using other than the recommended wire, contact your nearest Hirose representative.
Note 3 : Strip length: 3.5 to 4.5mm
10
Packaging
2500/reel
100/pack
2000/reel
100/pack
2500/reel
Finish
Tin plated
Gold plated
DF22 Series●7.92mm Contact Pitch High-Current Connectors for Internal Power Supplies (UL, C-UL and TÜV Listed)
BMated Dimensions
●Socket to Straight Header Connection
●Socket to Right Angle Header
Connection
1 Pos.
DF22B/C--1RS/P--7.92
DF22#--1P--7.92DSA(**)
DF22#--*S--7.92C(28)
(26.7)
(28.7)
DF22#--*P--7.92DS(**)
(23.7)
(25.7)
DF22#--1S--7.92C(28)
DF22--*RS/P--7.92
(34.6)
(32.6)
DF22#--1P--7.92DSA(**)
DF22B#--*S--7.92C
DF22C#--*S--7.92C
(13.3)
DF22#--*P--7.92DS(**)
2 to 5 Pos.
(12.45)
(13.5)
DF22--*RS/P--7.92
DF22B/C--*RS/P--7.92
DF22B/C--*RS/P--7.92
(26.7)
(28.7)
DF22B#--*S--7.92C
DF22C#--*S--7.92C
DF22#--*S--7.92C(28)
(23.7)
(25.7)
DF22#--*P--7.92DSA(**)
DF22#--*P--7.92DSA(**)
(13.0)
DF22--*RS/P--7.92C
DF22B/C---*RS/P--7.92
(47.55)
(43.55)
DF22B/C--*RS/P--7.92
DF22B/C--*RS/P--7.92
●In-line Double-row socket to In-line Double-row
Plug (Panel mount type) Connection
DF22B#--4DS--7.92C
(47.55)
(43.55)
DF22A#--*EP--7.92C
DF22#--4DEP--7.92C
DF22B#--*S--7.92C
DF22C#--*S--7.92C
DF22B/C--*RS/P--7.92
DF22B/C--*RS/P--7.92
●In-line Double-row socket to In-line
Double-row Plug Connection
(43.55)
DF22B#--4DS--7.92C
DF22A#--4DEP--7.92C
DF22C#--4DS--7.92C
(43.55)
DF22C#--4DS--7.92C
(23.3)
DF22#--4DEP--7.92C
(43.55)
DF22#--*S--7.92C(28)
DF22--RS/P--7.92
DF22B/C--*RS/P--7.92
(22.1)
(43.55)
DF22A#--*EP--7.92C
DF22B#--*S--7.92C
DF22C#--*S--7.92C
(14.2)
DF22#--*EP--7.92C
(44.55)
(40.55)
(14.2)
DF22#--*EP--7.92C
DF22#--*S--7.92C(28)
(22.1)
(44.55)
(40.55)
●Socket to In-line Plug Connection
(13.0)
●Socket to In-line Plug (Panel mount type)
Connection
(23.3)
Nov.1.2016 Copyright
Jan.1.2017
Copyright 2017
2016 HIROSE
HIROSE ELECTRIC
ELECTRIC CO.,
CO., LTD.
LTD. All
All Rights
Rights Reserved.
Reserved.
(31.6)
(29.6)
(13.5)
DF22--/1RS/P--7.92
DF22B#--1S--7.92C
DF22C#--1S--7.92C
(12.25)
(12.45)
DF22A#--4DEP--7.92C
11
DF22 Series●7.92mm Contact Pitch High-Current Connectors for Internal Power Supplies (UL, C-UL and TÜV Listed)
BTools
Part No.
HRS No.
Applicable Contacts
CM-105C
901-0001-0
DF22/DF22A-1416SCF/PCF/SCFA
AP105-DF22-1416
901-4576-7
DF22-1416SCF/PCF/SCFA/PCFA
AP105-DF22A-1416
901-4578-2
DF22A-1416SCF/PCF/SCFA
AP109A-DF22-1416
901-4579-5
DF22-1416SCF/PCF/SCFA/PCFA
Automatic
AP109A-DF22A-1416
901-4580-4
DF22A-1416SCF/PCF/SCFA/PCFA
AP109A-DF22A-1012
901-4582-0
DF22A-1012SCF/SCFA
CHS893800H-UP
DF22-1416SCF/DF22-1416PCF
Applicator manufactured by
CHS893900H-UP
DF22A-1416SCF/DF22A-1416PCF
JAPAN AUTOMATIC MACHINE
QHS895800H-UP
DF22A-1012SCF
HT104/DF22-1416
550-0285-0
DF22-1416SC/PC
Manual
Crimp tools
HT104/DF22A-1416
550-0286-2
DF22A-1416SC/PC
HT103/DF22A-1012
550-0288-8
DF22A-1012SC
Note 1 : When crimping contact DF22A-1012SCF use a press with 3.5 ton min.
Note 2 : AP109A type applicators cannot be used with the CM-105C press.
Note 3 : Any problems that occur from using tools other than those specified by Hirose, are not covered by warranty.
Note 4 : Applicator manufactured by JAPAN AUTOMATIC MACHINE (J.A.M.). Please access to HP of J.A.M., if you make inquiries
about the applicator or crimp defect. (URL : http://www.jam-net.co.jp)
Note 5 : Please follow the "Crimping quality standards" and "Table of crimping conditions" when crimping contacts.
Nov.1.2016 Copyright
Jan.1.2017
Copyright 2017
2016 HIROSE
HIROSE ELECTRIC
ELECTRIC CO.,
CO., LTD.
LTD. All
All Rights
Rights Reserved.
Reserved.
Type
Powered by TCPDF (www.tcpdf.org)
Item
Press unit
Applicators are used in automatic crimping
machines manufactured by Hirose Electric
Applicators are used in automatic
crimping machines manufactured by
other companies
BContact Extraction
■ Contact extraction tool : Flat-bladed screwdriver, 1.4mm blade width
■ Intended crimp Contacts : DF22-1416SC(F), DF22-1416SCFA, DF22A-1416SC(F),
DF22A-1416SCFA, DF22A-1012SC(F), DF22A-1012SCFA,
DF22-1416PC(F), DF22-1416PCFA, and DF22A-1416PC(F)
■ Work Method
(1)
1. Refer to the drawing No. 1. Insert
Housing CrossFlat-bladed screwdriver
correct size screwdriver in the
Sectional Diagram
insulator against the molded-in
lance. Deflect the lance as shown.
(2)
Molded-in lance
2. Assure that the lance is deflected
to release the contact and pull- out
wire with the terminated contact.
Caution
There are parts on the crimp contact that can cause injuries, please use caution when unmating the contacts.
BPrecautions
●The connector could be damaged if it is pulled out forcibly. When it is hard to pull out, push it in slightly first and then
depress the lock and un- mate.
●When thick, short sections of wire are used, the connector could be deformed due to the force of the wires’ position.
Route cables in such a way that they do twist when being installed.
●Incomplete insertion of the contact can be prevented by mounting a retainer; however, mounting of a retainer might not
be possible when the contact protrudes beyond the socket. Insert the contact securely and then mount the retainer.
●Please refer to the documents "Cable assembly Procedure", "Crimp condition" and "Crimp quality standards" for
the cable assembly procedures.
●Please refer to the "Mating/Unmating Operation Instruction Manual" for the connector operation.
●Please refer to the "Nylon Connector Guide" for handling instructions.
BCurrent Ratings
The current rating listed in the catalog indicates the allowable current per contact. However, in applications requiring
current transmission through all the contacts, about one-third of the listed rating should be applied.
When the current rating for the connector is 3A, and the allowable current of the conductor being used is 1A, then rating
of 1A will be used for the entire assembly.
The connectors should not be mating / unmating when the electrical current is being applied.
Hot swap should not be performed.
BUsage Environment
Please contact us about use in equipment that is subjected to repetitive high temperature and low temperature
environmental conditions.
®
12
2-6-3,Nakagawa Chuoh,Tsuzuki-Ku,Yokohama-Shi 224-8540,JAPAN
TEL: +81-45-620-3526 Fax: +81-45-591-3726
http://www.hirose.com
http://www.hirose-connectors.com
The characteristics and the specifications contained herein are for reference purpose. Please refer to the latest customer drawings prior to use.
The contents of this catalog are current as of date of 01/2016. Contents are subject to change without notice for the purpose of improvements.
Similar pages