Hirose DF30FC-50DS-0.4V 0.4 mm pitch, 0.9 mm height, board-to-board / board-to-fpc connector Datasheet

0.4 mm Pitch, 0.9 mm Height, Board-to-Board / Board-to-FPC Connectors
DF30 Series
Extremely small size
Header
0)
(0.4
(0.90)
(3
(4
22)
.76
.56
)
(10.
)
Receptacle
40 positions shown
■Overview
Continuous miniaturization and increased component
density on PCB created demand for extremely low profile
connectors. This series is addition of a new extremely low
profile connectors to Hirose's wide range of high reliability
board-to-board/board-to-FPC connection solutions.
■Features
1. Contact reliability
Concentration of the contact's normal forces at the single
point assures good contact wipe and electrical reliability,
while confirming the fully mated condition with a definite
tactile click.
2. Self alignment
Recognizing the difficulties of mating extremely small
connectors in limited spaces the connectors will self align
in horizontal axis within 0.3 mm.
■ Low profile
■ Increased mated retention
■ High contact reliability
Header
DF30*-*DP-0.4V
0.9mm
Receptacle
DF30*-*DS-0.4V
Protrusion improves mated retention
3. Automatic board placement
Packaged on tape-and-reel the plug and headers have
sufficiently large flat areas to allow pick-up with vacuum
nozzles of automatic placement equipment.
Self alignment
4. Variety of contact positions and styles
Available in standard contact positions of: 20, 22, 24, 30,
34, 40, 50, 60, 70 and 80 with and without metal fittings.
Addition of metal fittings does not affect external
dimensionsof the connectors.
Smaller contact positions are also available.
0.3mm
5. Support for continuity test connector
Connectors which have increased insertion and removal
durability are available for continuity tests. Contact your
Hirose sales representative for details.
■Applications
Cellular phones, PDA's, mobile computers, digital
cameras, digital video cameras, and other devices
demanding high reliability connections in extremely
limited spaces.
2004.10
1
■Product Specifications
Operating temperature range : -35ç to 85ç (Note 1)
Rated current 0.3A
Rating
Storage temperature range -10ç to 60ç (Note 2)
: Relative humidity 20% to 80% Storage humidity range
Relative humidity 40% to 70% (Note 2)
Rated voltage 30V AC Operating humidity range
Item
Specification
Conditions
1. Insulation resistance
50 Mø min.
100V DC
2. Withstanding voltage
No flashover or insulation breakdown.
100V AC / one minute
3. Contact resistance
100 mø max.
100 mA
4. Vibration
No electrical discontinuity of 1 µs or more
Frequency: 10 to 55 Hz, single amplitude of 0.75mm, 2 hours, 3 axis
5. Humidity
Contact resistance: 100 mø max.
Insulation resistance: 25 Mø min.
96 hours at temperature of 40ç±2ç and RH of
90% to 95%
6. Temperature cycle
Contact resistance: 100 mø max.
Insulation resistance: 50 Mø min.
Temperature: -55ç/+5ç to +35ç/+85ç/+5ç to +35ç
Duration: 30/10/30/10(Minutes)
5 cycles
7. Durability
(insertions/withdrawals)
Contact resistance: 100 mø max.
50 cycles(Connector for conductivity tests: 500 cycles)
8. Resistance to
soldering heat
No deformation of components
affecting performance.
Reflow: At the recommended temperature profile
Manual soldering: 300ç for 3 seconds
Note 1: Includes temperature rise caused by current flow.
Note 2: The term "storage" refers to products stored for long period of time prior to mounting and use. Operating temperature range and
humidity range covers non-conducting condition of installed connectors in storage, shipment or during transportation.
■Materials and Finishes
Connectors
Receptacles
and
Headers
Component
Insulator
Contacts
Metal fittings
Material
LCP
Phosphor bronze
Phosphor bronze
Finish
Color : Black
Gold plated
Tin-cupper plated
■Ordering information
●Receptacles and Headers
DF30 FC - * DS - 0.4
1
2
3
1 Series name: DF30
2 Configuration
FB: With metal fittings, without bosses
FC: Without metal fittings, without bosses
CJ: Connector for conductivity tests
3 Number of positions: 20, 22, 24, 30, 34, 40, 50, 60, 70, 80
4 Connector type
DS: Double row receptacle
DP: Double row header
2
4
5
V
(**)
6
7
5 Contact pitch: 0.4 mm
6 Termination section
V: Straight SMT
7 Packaging
(81): Embossed tape packaging (5,000 pieces per reel)
(82): Embossed tape packaging (1,000 pieces per reel)
Remarks
UL94V-0
-------------------------
■Receptacles (with metal fittings)
A
B
Note 2
3.76
4.56
P=0.4
0.15
Flat surface
HRS logo
0.08
0.9
C
2.54
Metal fittings
BRecommended PCB mounting pattern
E +0.05
0
2.74+0.05
0
0
3.46 -0.05
4.86+0.05
0
0
D -0.05
B±0.02
P=0.4±0.02
0.23±0.02
Recommended solder paste thickness: 120 µm
[Specification number] -**, (**)
(81): Embossed tape packaging (5,000 pieces per reel)
* Tolerances non- accumulative.
Unit: mm
Part Number
CL No.
Number of contacts
A
B
C
D
E
DF30FB-20DS-0.4V(**)
CL684-1098-3-**
20
06.22
03.6
1.20
05.72
06.52
DF30FB-22DS-0.4V(**)
CL684-1099-6-**
22
06.62
04.0
1.20
06.12
06.92
DF30FB-24DS-0.4V(**)
CL684-1100-3-**
24
07.02
04.4
1.20
06.52
07.32
DF30FB-30DS-0.4V(**)
CL684-1101-6-**
30
08.22
05.6
1.20
07.72
08.52
DF30FB-34DS-0.4V(**)
CL684-1102-9-**
34
09.02
06.4
1.36
08.52
09.32
DF30FB-40DS-0.4V(**)
CL684-1103-1-**
40
10.22
07.6
1.60
09.72
10.52
DF30FB-50DS-0.4V(**)
CL684-1104-4-**
50
12.22
09.6
2.00
11.72
12.52
DF30FB-60DS-0.4V(**)
CL684-1105-7-**
60
14.22
11.6
2.40
13.72
14.52
DF30FB-70DS-0.4V(**)
CL684-1106-0-**
70
16.22
13.6
2.80
15.72
16.52
DF30FB-80DS-0.4V(**)
CL684-1107-2-**
80
18.22
15.6
3.20
17.72
18.52
Note 1: Order by number of reels.
Note 2: Receptacles with 24 or fewer contacts positions will not have recessed areas.
3
■Receptacles (without metal fittings)
A
B
Note 2
3.76
4.56
P=0.4
C
Flat surface
HRS logo
0.08
0.9
0.15
BRecommended PCB mounting pattern
B ±0.02
0
3.46 -0.05
4.86 +0.05
0
P=0.4 ±0.02
0.23 ±0.02
Recommended solder paste thickness: 120 µm
[Specification number] -**, (**)
(81): Embossed tape packaging (5,000 pieces per reel)
* Tolerances non- accumulative.
Unit: mm
Part Number
CL No.
Number of contacts
A
B
C
DF30FC-20DS-0.4V(**)
CL684-1109-8-**
20
06.22
03.6
1.20
DF30FC-22DS-0.4V(**)
CL684-1110-7-**
22
06.62
04.0
1.20
DF30FC-24DS-0.4V(**)
CL684-1111-0-**
24
07.02
04.4
1.20
DF30FC-30DS-0.4V(**)
CL684-1112-2-**
30
08.22
05.6
1.20
DF30FC-34DS-0.4V(**)
CL684-1113-5-**
34
09.02
06.4
1.36
DF30FC-40DS-0.4V(**)
CL684-1078-6-**
40
10.22
07.6
1.60
DF30FC-50DS-0.4V(**)
CL684-1114-8-**
50
12.22
09.6
2.00
DF30FC-60DS-0.4V(**)
CL684-1082-3-**
60
14.22
11.6
2.40
DF30FC-70DS-0.4V(**)
CL684-1115-0-**
70
16.22
13.6
2.80
DF30FC-80DS-0.4V(**)
CL684-1116-3-**
80
18.22
15.6
3.20
Note 1: Order by number of reels.
Note 2: Receptacles with 24 or fewer contacts positions will not have recessed areas.
4
■Header (with metal fittings)
A
B
P=0.4
2.32
Note 2
A
3.12
Note 2
C
Flat surface
HRS logo
0.08
0.8
0.15
1.1
Metal fittings
BRecommended PCB mounting pattern
E +0.05
0
0
D -0.05
B ±0.02
1.3 +0.05
0
0
2 -0.05
3.42 +0.05
0
P=0.4 ±0.02
0.23 ±0.02
Recommended solder paste thickness: 120 µm
[Specification number] -**, (**)
(81): Embossed tape packaging (5,000 pieces per reel)
* Tolerances non- accumulative.
Unit: mm
Part Number
CL No.
Number of contacts
A
B
C
D
E
DF30FB-20DP-0.4V(**)
CL684-1129-5-**
20
05.14
03.6
1.20
04.64
05.44
DF30FB-22DP-0.4V(**)
CL684-1130-4-**
22
05.54
04.0
1.20
05.04
05.84
DF30FB-24DP-0.4V(**)
CL684-1131-7-**
24
05.94
04.4
1.20
05.44
06.24
DF30FB-30DP-0.4V(**)
CL684-1132-0-**
30
07.14
05.6
1.20
06.64
07.44
DF30FB-34DP-0.4V(**)
CL684-1133-2-**
34
07.94
06.4
1.36
07.44
08.24
DF30FB-40DP-0.4V(**)
CL684-1134-5-**
40
09.14
07.6
1.60
08.64
09.44
DF30FB-50DP-0.4V(**)
CL684-1135-8-**
50
11.14
09.6
2.00
10.64
11.44
DF30FB-60DP-0.4V(**)
CL684-1074-5-**
60
13.14
11.6
2.40
12.64
13.44
DF30FB-70DP-0.4V(**)
CL684-1075-8-**
70
15.14
13.6
2.80
14.64
15.44
DF30FB-80DP-0.4V(**)
CL684-1136-0-**
80
17.14
15.6
3.20
16.64
17.44
Note 1: Order by number of reels.
Note 2: Headers with 24 or fewer contacts positions will not have protruding areas.
5
■Header (without metal fittings)
A
B
P=0.4
Note 2
2.32
A
3.12
Note 2
C
Flat surface
HRS logo
0.08
0.8
0.15
BRecommended PCB mounting pattern
B ±0.02
0
2 -0.05
3.42 +0.05
0
P=0.4±0.02
0.23±0.02
Recommended solder paste thickness: 120 µm
[Specification number] -**, (**)
(81): Embossed tape packaging (5,000 pieces per reel)
* Tolerances non- accumulative.
Unit: mm
Part Number
CL No.
Number of contacts
A
B
C
DF30FC-20DP-0.4V(**)
CL684-1138-6-**
20
05.14
03.6
1.20
DF30FC-22DP-0.4V(**)
CL684-1139-9-**
22
05.54
04.0
1.20
DF30FC-24DP-0.4V(**)
CL684-1140-8-**
24
05.94
04.4
1.20
DF30FC-30DP-0.4V(**)
CL684-1141-0-**
30
07.14
05.6
1.20
DF30FC-34DP-0.4V(**)
CL684-1142-3-**
34
07.94
06.4
1.36
DF30FC-40DP-0.4V(**)
CL684-1079-9-**
40
09.14
07.6
1.60
DF30FC-50DP-0.4V(**)
CL684-1143-6-**
50
11.14
09.6
2.00
DF30FC-60DP-0.4V(**)
CL684-1083-6-**
60
13.14
11.6
2.40
DF30FC-70DP-0.4V(**)
CL684-1077-3-**
70
15.14
13.6
2.80
DF30FC-80DP-0.4V(**)
CL684-1144-9-**
80
17.14
15.6
3.20
Note 1: Order by number of reels.
Note 2: Headers with 24 or fewer contacts positions will not have protruding areas.
6
BPackaging Specification
5
Ø1.
(2.3)
1.4±0.15
0.3±0.1
F-F
C±0.1
F
A
A
B±0.1
A±0.3
A
.1
+0
0
2±0.1
8±0.1
4±0.1
1.75±0.1
● Embossed Carrier Tape Dimensions - Receptacle
G-G
F
G
H
0.2±0.05
G
Unreeling direction
.1
+0 0
5
7
0.
R
1
0.
+ 0
5
.7
R0
1.7+0.25
-0.05
1.5+0.2
-0
Detail H
● Reel Dimensions
Unreeling direction
2±0.5
(Ø80)
.2
Ø13±0
Ø21±
Ø380±2
Part number label
0.8
D +20
E MAX
Unit: mm
Part Number
A
B
C
D
E
DF30#-20DS-0.4V(**)
16.0
–
07.5
16.4
22.4
DF30#-22DS-0.4V(**)
16.0
–
07.5
16.4
22.4
DF30#-24DS-0.4V(**)
16.0
–
07.5
16.4
22.4
DF30#-30DS-0.4V(**)
16.0
–
07.5
16.4
22.4
DF30#-34DS-0.4V(**)
16.0
–
07.5
16.4
22.4
DF30#-40DS-0.4V(**)
24.0
–
11.5
24.4
30.4
DF30#-50DS-0.4V(**)
24.0
–
11.5
24.4
30.4
DF30#-60DS-0.4V(**)
24.0
–
11.5
24.4
30.4
DF30#-70DS-0.4V(**)
24.0
–
11.5
24.4
30.4
DF30#-80DS-0.4V(**)
32.0
28.4
14.2
32.4
38.4
Embossed tape 32mm or wider will have perforated feed holes on two sides.
7
E
E-E
B±0.1
(2.2)
1.3±0.15
0.3±0.1
A
A±0.3
A
.1
+0
0
8±0.1
A
5
Ø1.
2±0.1
4±0.1
1.75±0.1
● Embossed Carrier Tape Dimensions - Header
F
Unreeling direction
F
E
F-F
● Reel Dimensions
Unreeling direction
2±0.5
Part number label
0.2
Ø21±
0.8
Ø380±2
(Ø80)
Ø13±
C +20
D MAX
Unit: mm
8
Part Number
A
B
C
D
DF30#-20DP-0.4V(**)
16.0
07.5
16.4
22.4
DF30#-22DP-0.4V(**)
16.0
07.5
16.4
22.4
DF30#-24DP-0.4V(**)
16.0
07.5
16.4
22.4
DF30#-30DP-0.4V(**)
16.0
07.5
16.4
22.4
DF30#-34DP-0.4V(**)
16.0
07.5
16.4
22.4
DF30#-40DP-0.4V(**)
16.0
07.5
16.4
22.4
DF30#-50DP-0.4V(**)
24.0
11.5
24.4
30.4
DF30#-60DP-0.4V(**)
24.0
11.5
24.4
30.4
DF30#-70DP-0.4V(**)
24.0
11.5
24.4
30.4
DF30#-80DP-0.4V(**)
24.0
11.5
24.4
30.4
BUsage Recommendations
1. Recommended temperature profile
Reflow Conditions
(Temperature)
10 sec. max
Preheating: 150ç to 170ç 60 to 120 sec.
250ç
Soldering: 245±5ç
220ç
250ç max.
220ç
10 sec. max.
60 sec. max.
200ç
150ç
100ç
60 sec. max.
60 to 120 sec.
50ç
0ç
0 sec.
50 sec.
100 sec.
150 sec. (Time)
Note 1: Up to 2 cycles of Reflow soldering are possible under the same conditions, provided that there is
a return to normal temperature between the first and second cycle.
Note 2: The temperature profile indicates the board surface temperature at the point of contacts with the
connector terminals.
2. Recommended manual soldering
Manual soldering: 290±10ç for 3 seconds
3. Recommended screen thickness and
Thickness: 0.12 mm
open area ratio (Pattern area ratio)
4.Board warpage
Opening are ratio: DS side 100%, DP side 84%
Maximum of 0.02 mm at the connector center, with both ends of the connector as reference points.
5.Cleaning conditions
Refer to "Nylon Connector Use Handbook".
6. Precautions
■ Due to the extremely small size of the connectors, handling it with bare hands should
be avoided. Follow the recommendations given on the proceeding pages.
■ Use of fluxes is NOT recommended.
■ Different production lots may exhibit some discoloration of the insulator material. This
will not affect form, fit or function of the connectors.
■ The connectors should not be used a sole PCB support. It is recommended to use
additional means of board support.
9
BHandling Precautions when mating the connectors
0.3mm
0.3mm
Receptacle
Keep the connectors parallel to each other when positioning.
Header
Do not attempt to mate the connectors starting at one end or side.
Press-down evenly until slight resistance is felt.
Overcoming this slight resistance will complete the mating of
receptacle with the header.
A definite "click" sensation will confirm the fully mated condition.
10
BHandling Precautions when un-mating the connectors
DF30*-*DS-0.4V(81)
Fully mated
DF30*-*DP-0.4V(81)
Receptacle
Lift even one side, keeping both boards parallel to each other.
Header
Fig. A
Fig. B
When handling circumstances prevent the connector from being
kept level during un-mating, one end may be lifted separate as
shown on Fig. A.
However, to utilize this procedure the connector must be mounted
on a sufficiently rigid circuit board.
Any deflection of the board during this operation may result in
damage to the connector or solder joints.
Do not attempt the start of the un-mating of the connectors from one
side (Fig. B).
When removal is from the width orientation as illustrated in the
diagram to the left, damage could be caused to the connector. Do
not perform removal from the width orientation.
11
Similar pages