Vishay DG308ACJ-E3 Quad monolithic spst cmos analog switch Datasheet

DG308A/DG309
Vishay Siliconix
Quad Monolithic SPST CMOS Analog Switches
DESCRIPTION
FEATURES
Featuring low on-resistance (60 Ω) and fast switching
(130 ns), the DG308A is supplied in the “normally open”
configuration while DG309 is supplied “normally closed”.
Input thresholds are high voltage CMOS compatible.
• ± 15 V Analog Input Range
Designed with the Vishay Siliconix PLUS-40 CMOS process
to combine low power dissipation with a high breakdown
voltage rating of 44 V, each switch conducts equally well in
both directions when on, and blocks up to the supply voltage
when off. An epitaxial layer prevents latch up.
The DG308B/309B upgrades are recommended for new
designs.
Pb-free
• Low On-Resistance: 60 Ω
Available
• Fast Switching: 130 ns
RoHS*
• Low Power Dissipation: 30 nW
COMPLIANT
• CMOS Logic Compatible
BENEFITS
• Full Rail-to-Rail Analog Signal Range
• Low Signal Error
• Wide Dynamic Range
• Single or Dual Supply Capability
• Static Protected Logic Inputs
• Space Savings (TSSOP)
APPLICATIONS
• Portable and Battery Powered Instrumentation
• Communication Systems
• Computer Peripherals
• High-Speed Multiplexing
FUNCTIONAL BLOCK DIAGRAM AND PIN CONFIGURATION
DG308A
IN1
1
16
IN2
D1
2
15
D2
S1
3
14
S2
V–
4
13
V+
GND
5
12
NC
S4
6
11
S3
D4
7
10
D3
IN4
8
9
IN3
For SPST Switches per Package
TRUTH TABLE
Logic
0
1
DG308A
OFF
ON
DG309
ON
OFF
Logic "0" ≤ 3.5 V
Logic "1" ≥ 11 V
Top View
* Pb containing terminations are not RoHS compliant, exemptions may apply
Document Number: 70046
S-71155–Rev. F, 11-Jun-07
www.vishay.com
1
DG308A/DG309
Vishay Siliconix
ORDERING INFORMATION
Temp Range
Package
0 to 70 °C
16-Pin Plastic DIP
16-Pin Narrow SOIC
- 40 to 85 °C
16-Pin TSSOP
Part Number
DG308ACJ
DG308ACJ-E3
DG309CJ
DG309CJ-E3
DG308ADY
DG308ADY-E3
DG308ADY-T1
DG308ADY-T1-E3
DG309DY
DG309DY-E3
DG309DY-T1
DG309DY-T1-E3
DG308ADQ
DG308ADQ-E3
DG308ADQ-T1
DG308ADQ-T1-E3
DG309DQ
DG309DQ-E3
DG309DQ-T1
DG309DQ-T1-E3
ABSOLUTE MAXIMUM RATINGS
Parameter
Limit
Voltages Referenced V+ to VGND
25
(V-) - 2 to (V+) + 2 or
20 mA, whichever occurs first
Digital Inputsa, VS, VD
Current, Any Terminal Except S or D
Continuous Current
Storage Temperature
b
20
(Pulsed at 1 ms, 10 % duty cycle max)
70
(AK Suffix)
- 65 to 150
(CJ, DY and DQ Suffix)
- 65 to 125
16-Pin Narrow SOIC and
16-Pin CerDIP
V
30
S or D
16-Pin Plastic DIPc
Power Dissipation
Unit
44
d
mA
°C
470
TSSOPe
600
mW
900
Notes:
a. Signals on SX, DX, or INX exceeding V+ or V- will be clamped by internal diodes. Limit forward diode current to maximum current ratings.
b. All leads welded or soldered to PC Board.
c. Derate 12 mW/°C above 75 °C.
d. Derate 6.5 mW/°C above 25 °C.
e. Derate 7.6 mW/°C above 75 °C.
www.vishay.com
2
Document Number: 70046
S-71155–Rev. F, 11-Jun-07
DG308A/DG309
Vishay Siliconix
SCHEMATIC DIAGRAM (TYPICAL CHANNEL)
V+
S
VLevel
Shift/
Drive
VIN
V+
GND
D
V-
Figure 1.
SPECIFICATIONSa
Test Conditions
Unless Specified
V+ = 15 V, V- = - 15 V
Parameter
Symbol
VIN = 3.5 V or 11 V
f
A Suffix
- 55 to 125°C
Tempb
Typc
Mind
C, D Suffix
Maxd
Mind
Maxd
Unit
- 15
15
± 0.1
-1
100
100
150
1
100
- 15
15
V
Ω
-5
- 100
100
125
5
100
Analog Switch
Analog Signal Rangee
Drain-Source
On-Resistance
VANALOG
Full
rDS(on)
VD = ± 10 V, IS = 1 mA
Source Off Leakage Current
IS(off)
VS = ± 14 V, VD = ± 14 V
Room
Full
Room
Full
Drain Off Leakage Current
ID(off)
VD = ± 14 V, VS = ± 14 V
Room
Full
± 0.1
-1
100
1
100
-5
- 100
5
100
Drain On Leakage Current
ID(on)
VD = VS = ± 14 V
Room
Full
± 0.1
-1
100
1
100
-5
- 200
5
200
IINH
VIN = 15 V
Full
0.001
IINL
VIN = 0 V
Full
- 0.001
Room
8
Room
130
200
200
Room
90
150
150
Room
- 10
Room
11
Digital Control
Input Current with
Input Voltage High
Input Current with
Input Voltage Low
Input Capacitance
60
1
nA
1
µA
CIN
-1
-1
pF
Dynamic Characteristics
Turn-On Time
tON
Turn-Off Time
tOFF
See Figure 2
CL = 0.01 µF, Rgen = 0 Ω, Vgen = 0 V,
Source-Off Capacitance
Q
CS(off)
Drain-Off Capacitance
CD(off)
f = 140 kHz, VS, VD = 0 V
Channel-On Capacitance
CD(on)
Off-Isolationf
OIRR
Charge Injection
Document Number: 70046
S-71155–Rev. F, 11-Jun-07
RL = 75 Ω, VS = 2 Vp-p, f = 500 kHz
Room
8
Room
27
Room
78
ns
pC
pF
dB
www.vishay.com
3
DG308A/DG309
Vishay Siliconix
SPECIFICATIONSa
Test Conditions
Unless Specified
V+ = 15 V, V- = - 15 V
Parameter
Power Supplies
VIN = 3.5 V or 11
Symbol
Positive Supply Current
I+
Negative Supply Current
I-
A Suffix
- 55 to 125°C
Vf
b
All Channels On or Off
VIN = 0 V or 15 V
c
Temp
Typ
Room
Full
Room
Full
0.001
- 0.001
d
Min
Max
d
C, D Suffix
Mind
Maxd
10
100
- 10
- 100
10
100
- 100
Unit
µA
Notes:
a.Refer to PROCESS OPTION FLOWCHART.
b.Room = 25 °C, Full = as determined by the operating temperature suffix.
c. Typical values are for DESIGN AID ONLY, not guaranteed nor subject to production testing.
d.The algebraic convention whereby the most negative value is a minimum and the most positive a maximum, is used in this data sheet.
e.Guaranteed by design, not subject to production test.
f. VIN = input voltage to perform proper function.
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation
of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum
rating conditions for extended periods may affect device reliability.
TYPICAL CHARACTERISTICS 25 °C, unless otherwise noted
150
± 15 V Supplies
TA = 25 °C
±5V
800
120
± 7.5 V
90
I+, I– (μA)
r DS(on) – Drain-Source On-Resistance (Ω)
1000
TA = 25 °C
± 10 V
60
I200
± 20 V
- 10
-5
5
0
10
VD – Drain Voltage (V)
15
20
1k
10 k
100 k
1M
f – Frequency (Hz)
Supply Currents vs. Switching Frequency (All Inputs Active)
20
250
r DS(on) – Drain-Source On-Resistance (Ω)
TA = 25 °C
10
IS(off)
0
I S, I D (pA)
I+
100
- 15
rDS(on) vs. VD and Power Supply
ID(off)
- 10
400
± 15 V
30
0
- 20
600
ID(on)
- 20
- 30
V+ = + 7.5 V
TA = 25 °C
V- = 0 V
200
150
+ 10 V
100
+ 15 V
+ 20 V
50
0
- 15 - 12 - 9 - 6 - 3
0
3
6 9
12
VD or V S – Drain or Source Voltage (V)
Leakage Currents vs. Analog Voltage
www.vishay.com
4
15
0
5
10
15
VD – Drain Voltage (V)
20
rDS(on)vs. VD and Power Supply Voltage
Document Number: 70046
S-71155–Rev. F, 11-Jun-07
DG308A/DG309
Vishay Siliconix
TYPICAL CHARACTERISTICS
25 °C, unless otherwise noted
8
10
V- = 0 V
TA = 25 °C
TA = 25 °C
7
8
6
5
V T (V)
V T (V)
6
4
4
3
2
2
1
0
0
±5
± 10
± 15
V+, V- Positive & Negative Supplies (V)
0
± 20
0
5
10
15
V+ – Positive Supply Voltage (V)
Input Switching Threshold
vs. V+ and V- Supply Voltages
Input Switching Threshold vs. Positive
Supply Voltage
TEST CIRCUITS
+ 15 V
V+
VS = + 3 V
D
S
VO
Logic
Input
tr < 20 ns
tf < 20 ns
12 V
50 %
0V
tOFF
IN
12 V
GND
V-
CL
35 pF
RL
1k
90 %
Switch
Output
- 15 V
VO = V S
VO
tON
RL
RL + rDS(on)
Figure 2. Switching Time
APPLICATIONS
Single Supply Operation
The DG308A and DG309 will switch positive analog signals
while using a single positive supply. This will allow use in
many applications where only one supply is available. The
trade-offs or performance given up while using single
supplies are:
1) increased rDS(on) and 2) slower switching speed. As stated
in the absolute maximum ratings section of the data sheet,
the analog voltage should not go above or below the supply
voltages which in single supply operation are V+ and 0 V.
Vishay Siliconix maintains worldwide manufacturing capability. Products may be manufactured at one of several qualified locations. Reliability data for Silicon Technology and Package Reliability represent a composite of all qualified locations. For related documents such as package/tape drawings, part marking, and reliability
data, see http://www.vishay.com/ppg?70046.
Document Number: 70046
S-71155–Rev. F, 11-Jun-07
www.vishay.com
5
Legal Disclaimer Notice
Vishay
Disclaimer
All product specifications and data are subject to change without notice.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf
(collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein
or in any other disclosure relating to any product.
Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any
information provided herein to the maximum extent permitted by law. The product specifications do not expand or
otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed
therein, which apply to these products.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this
document or by any conduct of Vishay.
The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless
otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such
applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting
from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding
products designed for such applications.
Product names and markings noted herein may be trademarks of their respective owners.
Document Number: 91000
Revision: 18-Jul-08
www.vishay.com
1
Similar pages