Vishay DG401BDY-T1 Low-power, high-speed cmos analog switch Datasheet

DG401B, DG403B, DG405B
Vishay Siliconix
Low-Power, High-Speed CMOS Analog Switches
DESCRIPTION
FEATURES
The DG401B, DG403B, DG405B monolithic analog switches
are replacements for the popular DG401/403/405 analog
switches and provide improved performance, combining
high speed (tON: 100 ns, typ) with low power consumption
make the DG401B series ideal for portable and battery
powered applications.
Built on the Vishay Siliconix proprietary high-voltage silicongate process to achieve high voltage rating and superior
switch
on/off
performance,
break-before-make
is
guaranteed for the SPDT configurations.
Each switch conducts equally well in both directions when
on, and blocks up to 30 V peak-to-peak when off.
On-resistance is very flat over the full ± 15 V analog range.
The DG401B has two independent SPST switches. The
DG403B has four SPST switches in NO/NC combinations.
The DG405B has four switches in two SPST pairs (see
Functional Block Diagrams and Pin Configurations on pages
1 and 2.)
The DG401B, DG403B, DG405B is available in both 16-pin
plastic dip and 16-pin SOIC packages.
As a committed partner to the community and the
environment, Vishay Siliconix manufactures this product
with the lead (Pb)-free device terminations. For analog
switching products manufactured with 100 % matte tin
device terminations, the lead (Pb)-free “-E3” suffix is being
used as a designator.
•
•
•
•
•
•
•
•
44 V supply max rating
± 15 V analog signal range
On-resistance - RDS(on): 23 
Low leakage - ID(on): 40 pA
Fast switching - tON: 100 ns
Upgrade to DG401B, DG403B, DG405B
TTL, CMOS compatible
Single supply capability
BENEFITS
• Wide dynamic range
• Break-before-make switching action
(DG403B only)
• Simple interfacing
APPLICATIONS
•
•
•
•
Audio and video switching
Sample-and-hold circuits
Test equipment
PBX, PABX
FUNCTIONAL BLOCK DIAGRAM AND PIN CONFIGURATION
DG401B
Dual-In-Line and SOIC
D1
NC
NC
NC
NC
NC
NC
D2
1
16
S1
2
15
IN1
3
14
4
13
5
12
VGND
Two SPST Switches per Package
TRUTH TABLE
Logic
Switch
0
OFF
1
ON
NC
V+
6
11
7
10
IN2
8
9
S2
Logic “0” 0.8 V
Logic “1” 2.4 V
Top View
Document Number: 73069
S11-0179-Rev. B, 07-Feb-11
www.vishay.com
1
DG401B, DG403B, DG405B
Vishay Siliconix
FUNCTIONAL BLOCK DIAGRAM AND PIN CONFIGURATION
DG403B
Dual-In-Line and SOIC
D1
1
16 S1
2
15
D3
3
14
S3
4
13
S4
5
12
D4
6
11
NC
NC
D2
IN1
VGND
NC
V+
7
10
IN2
8
9
S2
Four SPST Switches in Two Pairs per Package
TRUTH TABLE
Logic
SW1, SW2
0
OFF
SW3, SW4
ON
1
ON
OFF
Logic “0” 0.8 V
Logic “1” 2.4 V
Top View
DG405B
Dual-In-Line and SOIC
D1
1
16 S1
2
15
D3
3
14
S3
4
13
NC
S4
5
12
D4
6
11
NC
D2
IN1
V-
Four SPST Switches in Two Pairs per Package
TRUTH TABLE
Logic
Switch
0
OFF
1
ON
GND
NC
V+
7
10
IN2
8
9
S2
Logic “0” 0.8 V
Logic “1” 2.4 V
Top View
ORDERING INFORMATION
Standard
Commercial
Part Number
Lead (Pb)-free
Commercial
Part Number
DG401BDJ
DG401BDJ-E3
DG403BDJ
DG403BDJ-E3
DG405BDJ
DG405BDJ-E3
DG401BDY
DG401BDY-E3
DG403BDY
DG403BDY-E3
DG405BDY
DG405BDY-E3
DG401BDY-T1
DG401BDY-T1-E3
DG403BDY-T1
DG403BDY-T1-E3
DG405BDY-T1
DG405BDY-T1-E3
www.vishay.com
2
Package
Temperature
Range
16-Pin Plastic Dip
16-Pin Narrow SOIC
- 40 to 85 °C
16-Pin Narrow SOIC With Tape and
Reel
Document Number: 73069
S11-0179-Rev. B, 07-Feb-11
DG401B, DG403B, DG405B
Vishay Siliconix
ABSOLUTE MAXIMUM RATINGS
Parameter
Symbol
Limit
V+ to VGND to V-
25
Current (Any Terminal) Continuous
30
Current, S or D (Pulsed 1 ms 10 % duty)
100
Power Dissipation (Package)b
V
(V-) - 0.3 V to (V+) + 0.3 V or
30 mA, whichever occurs first
Digital Inputsa, VS, VD
Storage Temperature
Unit
44
(DJ, DY Suffix)
mA
- 65 to 125
16-Pin Plastic DIPc
450
16-Pin SOICd
600
°C
mW
Notes:
a. Signals on SX, DX, or INX exceeding V+ or V- will be clamped by internal diodes. Limit forward diode current to maximum current ratings.
b. All leads welded or soldered to PC board.
c. Derate 6 mW/°C above 75 °C.
d. Derate 7.6 mW/°C above 75 °C.
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation
of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum
rating conditions for extended periods may affect device reliability.
SPECIFICATIONSa
Parameter
Symbol
Test Conditions
Unless Specified
V+ = 15 V, V- = - 15 V
VIN = 2.4 V, 0.8 Vf
Limits
- 40 °C to 85 °C
Temp.b
Min.d
Full
-15
Typ.c
Unit
Max.d
Analog Switch
Analog Signal Rangee
Drain-Source
On-Resistance
 Drain-Source
On-Resistance
VANALOG
15
RDS(on)
IS = - 10 mA, VD = ± 10 V
V+ = 13.5 V, V- = - 13.5 V
Room
Full
23
45
55
RDS(on)
IS = - 10 mA, VD = ± 5 V, 0 V
V+ = 16.5 V, V- = - 16.5 V
Room
Full
0.72
3
5
IS(off)
Switch Off Leakage Current
ID(off)
V+ = 16.5, V- = - 16.5 V
VD = ± 15.5 V, VS = ± 15.5 V
Room
Hot
- 0.5
-5
- 0.01
0.5
5
Room
Hot
- 0.5
-5
- 0.01
0.5
5
ID(on)
V+ = 16.5 V, V- = - 16.5 V
VS = VD = ± 15.5 V
Room
Hot
-1
- 10
- 0.04
1
10
Input Current VIN Low
IIL
VIN under test = 0.8 V, all other = 2.4 V
Full
-1
0.005
1
Input Current VIN High
IIH
VIN under test = 2.4 V, all other = 0.8 V
Full
-1
0.005
1
Turn-On Time
tON
100
150
tOFF
RL = 300 , CL = 35 pF
see figure 2
Room
Turn-Off Time
Room
60
100
tD
RL = 300 , CL = 35 pF
Room
Q
CL = 10 000 pF, Vgen = 0 V, Rgen = 0 
Room
60
RL = 100 , CL = 5 pF, f =1 MHz
Room
- 81.7
Room
- 94.8
Room
12
Room
12
Room
39
Channel On Leakage Current
V

nA
Digital Control
µA
Dynamic Characteristics
Break-Before-Make Time Delay
(DG403B)
Charge Injection
Off Isolation Reject Ratio
OIRR
Channel-to-Channel Crosstalk
XTALK
Source Off Capacitance
CS(off)
Drain Off Capacitance
CD(off)
Channel On Capacitance
Document Number: 73069
S11-0179-Rev. B, 07-Feb-11
CD, CS(on)
f = 1 MHz, VS = 0 V
5
ns
12
pC
dB
pF
www.vishay.com
3
DG401B, DG403B, DG405B
Vishay Siliconix
SPECIFICATIONSa
Parameter
Limits
- 40 °C to 85 °C
Test Conditions
Unless Specified
V+ = 15 V, V- = - 15 V
VIN = 2.4 V, 0.8 Vf
Symbol
Temp.
b
Min.d
Unit
Typ.c
Max.d
0.250
0.5
1
Power Supplies
Positive Supply Current
I+
Negative Supply Current
I-
Ground Current
Room
Full
V+ = 16.5 V, V- = - 16.5 V
VIN = 0 or 5 V
IGND
Room
Full
- 0.5
-1
0.25
Room
Full
- 0.5
-1
0.25
mA
Notes:
a. Refer to PROCESS OPTION FLOWCHART.
b. Room = 25 °C, Full = as determined by the operating temperature suffix.
c. Typical values are for DESIGN AID ONLY, not guaranteed nor subject to production testing.
d. The algebraic convention whereby the most negative value is a minimum and the most positive a maximum, is used in this data sheet.
e. Guaranteed by design, not subject to production test.
f. VIN = input voltage to perform proper function.
TYPICAL CHARACTERISTICS (25 °C, unless otherwise noted)
100 000
60
50
10 000
Supply Current (mA)
ICC - Supply Current (pA)
V+ = 15 V
V- = - 15 V
1000
I+
I-
100
10
20
0
- 25
5
35
65
95
Temperature (°C)
Supply Current vs. Temperature
www.vishay.com
4
30
10
1
- 55
40
125
0
2000
4000
6000
8000
10000
12000
Frequency (kHz)
Supply Current vs. Switching Frequency
Document Number: 73069
S11-0179-Rev. B, 07-Feb-11
DG401B, DG403B, DG405B
Vishay Siliconix
TYPICAL CHARACTERISTICS (25 °C, unless otherwise noted)
90
60
VCC =
VCC =
VCC =
VCC =
VCC =
VCC =
50
45
40
VCC = 7.5 V
VCC = 10 V
VCC = 12 V
VCC = 15 V
VCC = 20 V
VCC = 22 V
80
±6V
± 10 V
± 12 V
± 15 V
± 20 V
± 22 V
RON - On-Resistance (Ω)
R ON - On-Resistance (Ω)
55
35
30
25
70
60
50
40
30
20
20
15
10
10
- 25 - 20 - 15 - 10
-5
0
5
10
15
20
0
25
10
20
25
RON vs. Analog Voltage and Supply Voltage
RON vs. Analog Voltage and Single Supply Voltage
100
VCC = ± 15 V
IS = 10 mA
125 °C
85 °C
25 °C
0 °C
- 40 °C
- 55 °C
50
45
60
40
35
30
40
20
0
- 20
25
- 40
20
- 60
15
- 80
10
- 15
- 10
-5
0
5
10
V+ = 15 V
V- = - 15 V
For ID(off), VS = 0 V
For IS(off), V D = 0 V
80
Leakage Current (pA)
55
ID(on)
ID(off)
IS(off)
- 100
- 15
15
-5
5
VD - Analog Voltage (V)
Leakage Current vs. Analog Voltage
10 000
150
t(on), VS = + 5 V
t(on), VS = - 5 V
t(off), VS = - 5 V
t(off), VS = + 5 V
125
Switching Time (nS)
1000
100
IS(off)
ID(on)
ID(off)
10
100
75
50
25
1
- 55
15
VD - Analog Voltage (V)
RON vs. Analog Voltage and Temperature
Leakage Current (pA)
15
VD - Analog Voltage (V)
60
R ON - On-Resistance (Ω)
5
VD - Analog Voltage (V)
0
- 25
5
35
65
95
Temperature (°C)
Leakage Current vs. Temperature
Document Number: 73069
S11-0179-Rev. B, 07-Feb-11
125
0
±5
± 10
± 15
± 20
± 25
Supply Voltage (V)
Switching Time vs. Supply Voltage
www.vishay.com
5
DG401B, DG403B, DG405B
Vishay Siliconix
TYPICAL CHARACTERISTICS (25 °C, unless otherwise noted)
250
80
t(on), VS = + 5 V
t(off), VS = + 5 V
225
Switching Time (nS)
200
Switching Time (nS)
t(on), V S = + 10 V
t(on), V S = - 10 V
t(off), V S = + 10 V
t(off), V S = - 10 V
70
175
150
125
100
75
50
60
50
40
30
V+ = 15 V
V- = - 15 V
25
0
0
5
10
15
20
20
- 55
25
- 25
5
Supply Voltage (V)
Switching Time vs. Single Supply Voltage
65
95
125
Switching Time vs. Temperature
3.0
- 10
2.8
10
2.6
2.4
Loss, OIRR, X TALK (dB)
VTH - Input Threshold Voltage (V)
35
Temperature (°C)
2.2
2.0
1.8
1.6
1.4
1.2
1.0
Insertion Loss
30
50
Off Isolation
70
Cross Talk
90
110
0.8
0.6
130
5
10
15
20
25
30
0.01
Supply Voltage (V)
Input Switching Threshold vs. Supply Voltage
0.1
10
1
Frequency (MHz)
100
1000
Insertion Loss, Off -Isolation
Crosstalk vs. Frequency
SCHEMATIC DIAGRAM (Typical Channel)
V+
S
VVIN
Level
Shift/
Drive
V+
GND
D
V-
Figure 1.
www.vishay.com
6
Document Number: 73069
S11-0179-Rev. B, 07-Feb-11
DG401B, DG403B, DG405B
Vishay Siliconix
TEST CIRCUITS
VO is the steady state output with the switch on. Feedthrough via switch capacitance may result in spikes at the leading and
trailing edge of the output waveform.
tr < 20 ns
tf < 20 ns
3V
Logic
Input
+ 15 V
V+
± 10 V
S
D
50 %
0V
tOFF
Switch
Input*
VO
VS
VO
90 %
IN
RL
1 kΩ
V-
GND
CL
35 pF
0V
Switch
Output
tON
- 15 V
- VS
* VS = 10 V for tON, VS = - 10 V for t OFF
CL (includes fixture and stray capacitance)
RL
VO = VS
90 %
VO
Switch
Input*
Note:
RL + R DS(on)
Logic input waveform is inverted for switches that
have the opposite logic sense control
Figure 2. Switching Time
+ 15 V
3V
Logic
Input
50 %
V+
VS1
VS2
S1
D1
S2
0V
VS1
VO1
VO1
D2
Switch
Output
IN
RL1
V-
GND
90 %
VO2
RL2
0V
VS2
VO2
CL1
CL2
90 %
0V
Switch
Output
tD
tD
- 15 V
C L (includes fixture and stray capacitance)
Figure 3. Break-Before-Make
+ 15 V
Rg
V+
S
IN
Vg
VO
CL
10 nF
3V
GND
ΔVO
D
VO
IN
On
Off
On
VQ = ΔVO x CL
- 15 V
Figure 4. Charge Injection
Document Number: 73069
S11-0179-Rev. B, 07-Feb-11
www.vishay.com
7
DG401B, DG403B, DG405B
Vishay Siliconix
TEST CIRCUITS
+ 15 V
C
+ 15 V
V+
VS
C
D
S
VO
Rg = 50 Ω
RL
100 Ω
IN
0 V, 2.4 V
V+
S
VS
VO
D
Rg = 50 Ω
GND
V-
C
RL
100 Ω
IN
0 V, 2.4 V
GND
- 15 V
V-
VS
Off Isolation = 20 log
- 15 V
VO
C = RF bypass
C = RF bypass
Figure 6. Insertion Loss
Figure 5. Off Isolation
+ 15 V
C
V+
S1
VS
C
+ 15 V
D
Rg = 50 Ω
C
50 Ω
VO
V+
S2
S
Meter
RL
IN
IN
0.8 V
GND
C
V-
HP4192A
Impedance
Analyzer
or Equivalent
0 V, 2.4 V
D
GND
- 15 V
XTALK Isolation = 20 log
C = RF bypass
C
f = 1 MHz
VS
VO
Figure 7. Crosstalk
www.vishay.com
8
V-
- 15 V
Figure 8. Capacitances
Document Number: 73069
S11-0179-Rev. B, 07-Feb-11
DG401B, DG403B, DG405B
Vishay Siliconix
APPLICATIONS
+ 15 V
+ 15 V
V+
Left
Source 1
Right
Left
S1
D1
S3
D3
ein
Left
D1
S3
D3
IN1
eout
C1
S2
D2
S4
D4
Right
Integrate/
Reset
TTL
S2
D2
S4
D4
C2
IN2
IN2
TTL
Channel
Select
+
-
IN1
Source 2
Right
V+
S1
DG403B
DG403B
GND
Slope
Select
V-
GND
V-
- 15 V
- 15 V
Figure 9. Stereo Source Selector
Figure 10. Dual Slope Integrator
Dual Slope Integrators
The DG403B is well suited to configure a selectable slope
integrator. One control signal selects the timing capacitor C1
or C2. Another one selects ein or discharges the capacitor in
preparation for the next integration cycle.
+ 15 V
V+
Band-Pass Switched Capacitor Filter
Single-pole double-throw switches are a common element
for switched capacitor networks and filters. The fast
switching times and low leakage of the DG403B allow for
higher clock rates and consequently higher filter operating
frequencies.
S1
D1
S3
D3
IN1
ein
S2
D2
S4
D4
IN2
Clock
DG403B
GND
V-
- 15 V
+
-
eout
Figure 11. Band-Pass Switched Capacitor Filter
Document Number: 73069
S11-0179-Rev. B, 07-Feb-11
www.vishay.com
9
DG401B, DG403B, DG405B
Vishay Siliconix
APPLICATIONS
Peak Detector
the analog input voltage. When ein goes below eout A3 goes
negative, turning SW1 off. The system will therefore store the
most positive analog input experienced.
A3 acting as a comparator provides the logic drive for
operating SW1. The output of A2 is fed back to A3 and
compared to the analog input ein. If ein > eout the output of A3
is high keeping SW1 closed. This allows C1 to charge up to
Reset
SW2
ein
–
A1
+
+
A3
–
SW1
R1
+
A2
–
DG401B
eout
C1
Figure 12. Positive Peak Detector
Vishay Siliconix maintains worldwide manufacturing capability. Products may be manufactured at one of several qualified locations. Reliability data for Silicon
Technology and Package Reliability represent a composite of all qualified locations. For related documents such as package/tape drawings, part marking, and
reliability data, see www.vishay.com/ppg?73069.
www.vishay.com
10
Document Number: 73069
S11-0179-Rev. B, 07-Feb-11
Package Information
Vishay Siliconix
SOIC (NARROW):
16ĆLEAD
JEDEC Part Number: MS-012
MILLIMETERS
16
15
14
13
12
11
10
Dim
A
A1
B
C
D
E
e
H
L
Ĭ
9
E
1
2
3
4
5
6
7
8
INCHES
Min
Max
Min
Max
1.35
1.75
0.053
0.069
0.10
0.20
0.004
0.008
0.38
0.51
0.015
0.020
0.18
0.23
0.007
0.009
9.80
10.00
0.385
0.393
3.80
4.00
0.149
0.157
1.27 BSC
0.050 BSC
5.80
6.20
0.228
0.244
0.50
0.93
0.020
0.037
0_
8_
0_
8_
ECN: S-03946—Rev. F, 09-Jul-01
DWG: 5300
H
D
C
All Leads
e
Document Number: 71194
02-Jul-01
B
A1
L
Ĭ
0.101 mm
0.004 IN
www.vishay.com
1
Package Information
Vishay Siliconix
PDIP: 16ĆLEAD
16
15
14
13
12
11
10
9
E
E1
1
2
3
4
5
6
7
8
D
S
Q1
A
A1
L
15°
MAX
C
B1
e1
Dim
A
A1
B
B1
C
D
E
E1
e1
eA
L
Q1
S
B
eA
MILLIMETERS
Min
Max
INCHES
Min
Max
3.81
5.08
0.150
0.200
0.38
1.27
0.015
0.050
0.38
0.51
0.015
0.020
0.89
1.65
0.035
0.065
0.20
0.30
0.008
0.012
18.93
21.33
0.745
0.840
7.62
8.26
0.300
0.325
5.59
7.11
0.220
0.280
2.29
2.79
0.090
0.110
7.37
7.87
0.290
0.310
2.79
3.81
0.110
0.150
1.27
2.03
0.050
0.080
0.38
1.52
.015
0.060
ECN: S-03946—Rev. D, 09-Jul-01
DWG: 5482
Document Number: 71261
06-Jul-01
www.vishay.com
1
Application Note 826
Vishay Siliconix
RECOMMENDED MINIMUM PADS FOR SO-16
RECOMMENDED MINIMUM PADS FOR SO-16
0.372
(9.449)
0.152
0.022
0.050
0.028
(0.559)
(1.270)
(0.711)
(3.861)
0.246
(6.248)
0.047
(1.194)
Recommended Minimum Pads
Dimensions in Inches/(mm)
Return to Index
APPLICATION NOTE
Return to Index
www.vishay.com
24
Document Number: 72608
Revision: 21-Jan-08
Legal Disclaimer Notice
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree
to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and
damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay
or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to
obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Document Number: 91000
Revision: 11-Mar-11
www.vishay.com
1
Similar pages