Vishay DG407DJ-E3 16-ch/dual 8-ch high-performance cmos analog multiplexer Datasheet

DG406, DG407
Vishay Siliconix
16-Ch/Dual 8-Ch High-Performance CMOS Analog Multiplexers
DESCRIPTION
FEATURES
The DG406 is a 16 channel single-ended analog multiplexer
designed to connect one of sixteen inputs to a common
output as determined by a 4-bit binary address. The DG407
selects one of eight differential inputs to a common
differential output. Break-before-make switching action
protects against momentary shorting of inputs.
An on channel conducts current equally well in both
directions. In the off state each channel blocks voltages up
to the power supply rails. An enable (EN) function allows the
user to reset the multiplexer/demultiplexer to all switches off
for stacking several devices. All control inputs, address (Ax)
and enable (EN) are TTL compatible over the full specified
operating temperature range.
Applications for the DG406, DG407 include high speed data
acquisition, audio signal switching and routing, ATE
systems, and avionics. High performance and low power
dissipation make them ideal for battery operated and remote
instrumentation applications.
Designed in the 44 V silicon-gate CMOS process, the
absolute maximum voltage rating is extended to 44 V,
allowing operation with ± 20 V supplies. Additionally single
(12 V) supply operation is allowed. An epitaxial layer
prevents latchup.
For applications information please request documents
70601 and 70604.
•
•
•
•
•
Low on-resistance - RDS(on): 50 
Low charge injection - Q: 15 pC
Fast transition time - tTRANS: 200 ns
Low power: 0.2 mW
Single supply capability
• 44 V supply max. rating
Pb-free
Available
RoHS*
COMPLIANT
BENEFITS
•
•
•
•
•
•
Higher accuracy
Reduced glitching
Improved data throughput
Reduced power consumption
Increased ruggedness
Wide supply ranges: ± 5 V to ± 20 V
APPLICATIONS
•
•
•
•
•
•
•
Data acquisition systems
Audio signal routing
Medical instrumentation
ATE systems
Battery powered systems
High-rel systems
Single supply systems
FUNCTIONAL BLOCK DIAGRAM AND PIN CONFIGURATION
DG406
DG407
Dual-In-Line and SOIC Wide-Body
V+
28
1
Dual-In-Line and SOIC Wide-Body
D
V+
1
28
Da
Db
2
27
V-
NC
2
27
V-
NC
3
26
S8
NC
3
26
S8a
S8b
4
25
S7a
S16
4
25
S7
S15
5
24
S6
S7b
5
24
S6a
S6b
6
23
S5a
S14
6
23
S5
S13
7
22
S4
S5b
7
22
S4a
S4b
8
21
S3a
20
S2a
S12
8
21
S3
S11
9
20
S2
S3b
9
S2b
10
19
S1a
18
EN
17
A0
2
S10
10
19
S1
S9
11
18
EN
S1b
11
17
A0
GND
12
16
A1
NC
13
16
A1
15
A2
NC
14
15
A2
GND
12
NC
13
A3
Decoders/Drivers
14
Top View
Decoders/Drivers
Top View
* Pb containing terminations are not RoHS compliant, exemptions may apply
Document Number: 70061
S11-0179-Rev. J, 07-Feb-11
www.vishay.com
1
DG406, DG407
Vishay Siliconix
FUNCTIONAL BLOCK DIAGRAM AND PIN CONFIGURATION
5
25
S7
S7b
S14
6
24
S6
S13
7
23
S5
S12
8
22
S11
9
21
S10
10
S9
11
Da
V-
S15
V+
D
28 27 26
Db
V+
1
NC
NC
2
S 8b
NC
3
S8
S 16
4
S 8a
PLCC and LCC
DG407
4
3
2
1
28 27 26
V-
PLCC and LCC
DG406
5
25
S7a
S6b
6
24
S6a
S5b
7
23
S5a
S4
S4b
8
22
S4a
S3
S3b
9
21
S3a
20
S2
S2b
10
20
S2a
19
S1
S1b
11
19
S1a
EN
A0
A1
A2
NC
NC
GND
EN
A0
NC
A1
12 13 14 15 16 17 18
A2
12 13 14 15 16 17 18
A3
Decoders/Drivers
GND
Decoders/Drivers
Top View
Top View
TRUTH TABLE (DG406)
TRUTH TABLE (DG407)
A3
A2
A1
A0
EN
On Switch
A2
A1
A0
EN
On Switch Pair
X
0
0
0
0
0
0
0
0
1
1
1
1
1
1
1
1
X
0
0
0
0
1
1
1
1
0
0
0
0
1
1
1
1
X
0
0
1
1
0
0
1
1
0
0
1
1
0
0
1
1
X
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
None
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
X
0
0
0
0
1
1
1
1
X
0
0
1
1
0
0
1
1
X
0
1
0
1
0
1
0
1
0
1
1
1
1
1
1
1
1
None
1
2
3
4
5
6
7
8
ORDERING INFORMATION (DG406)
Temp. Range
- 40 °C to 85 °C
www.vishay.com
2
Package
Part Number
28-Pin Plastic DIP
DG406DJ
DG406DJ-E3
28-Pin PLCC
DG406DN
DG406DN-T1-E3
28-Pin Widebody SOIC
DG406DW
DG406DW-E3
Logic “0” = VAL 0.8 V
Logic “1” = VAH 2.4 V
X = Do not Care
ORDERING INFORMATION (DG407)
Temp. Range
- 40 °C to 85 °C
Package
Part Number
28-Pin Plastic DIP
DG407DJ
DG407DJ-E3
28-Pin PLCC
DG407DN
DG407DN-T1-E3
28-Pin Widebody SOIC
DG407DW
DG407DW-E3
Document Number: 70061
S11-0179-Rev. J, 07-Feb-11
DG406, DG407
Vishay Siliconix
ABSOLUTE MAXIMUM RATINGS
Parameter
Voltages Referenced to VDigital Inputs
a,
V+
GND
VS, VD
Current (Any terminal)
Peak Current, S or D (Pulsed at 1 ms, 10 % duty cycle max.)
Storage Temperature
Power Dissipation (Package)b
Limit
44
25
(V-) - 2 to (V+) + 2 V
or 20 mA, whichever occurs first
30
100
(AK, AZ Suffix)
- 65 to 150
(DJ, DN Suffix)
- 65 to 125
Unit
V
mA
°C
28-Pin Plastic DIPb
625
28-Pin CerDIPd
1.2
W
28-Pin Plastic PLCCc
450
mW
LCC-28e
28-Pin Widebody SOIC
1.35
W
450
mW
mW
Notes:
a. Signals on SX, DX or INX exceeding V+ or V- will be clamped by internal diodes. Limit forward diode current to maximum current ratings.
b. All leads soldered or welded to PC board.
c. Derate 6 mW/°C above 75°C.
d. Derate 12 mW/°C above 75°C.
e. Derate 13.5 mW/°C above 75°C .
Document Number: 70061
S11-0179-Rev. J, 07-Feb-11
www.vishay.com
3
DG406, DG407
Vishay Siliconix
SPECIFICATIONSa
Test Conditions
Unless Otherwise Specified
V+ = 15 V, V- = - 15 V
VAL = 0.8 V, VAH = 2.4 Vf
Temp.b
RDS(on)
VD = ± 10 V, IS = - 10 mA
sequence each switch on
Full
Room
Full
RDS(on)
VD = ± 10 V
Room
Parameter
Analog Switch
Symbol
Analog Signal Rangee
Drain-Source
On-Resistance
RDS(on) Matching Between
Channelsg
VANALOG
Source Off Leakage Current
Drain Off Leakage Current
IS(off)
ID(off)
VEN = 0 V
VD = ± 10 V
VS = ± 10 V
DG406
DG407
Drain On Leakage Current
ID(on)
VS = VD = ± 10
sequence each
switch on
DG406
DG407
A Suffix
D Suffix
- 55 °C to 125 °C - 40 °C to 85 °C
Room
Full
Room
Full
Room
Full
Room
Full
Room
Full
Typ.c
Min.d
Max.d
Min.d
Max.d
Unit
- 15
15
100
125
- 15
15
100
125
V
50
5
0.01
0.04
0.04
0.04
0.04

%
- 0.5
- 50
-1
- 200
-1
- 100
-1
- 200
-1
- 100
0.5
50
1
200
1
100
1
200
1
100
- 0.5
-5
-1
- 40
-1
- 20
-1
- 40
-1
- 20
0.5
5
1
40
1
20
1
40
1
20
nA
Digital Control
Logic High Input Voltage
VINH
Full
Logic Low Input Voltage
VINL
Full
2.4
2.4
0.8
0.8
V
Logic High Input Current
IAH
VA = 2.4 V, 15 V
Full
-1
1
-1
1
Logic Low Input Current
IAL
VEN = 0 V, 2.4 V, VA = 0 V
Full
-1
1
-1
1
Logic Input Capacitance
Cin
f = 1 MHz
Room
7
Transition Time
tTRANS
see figure 2
200
Break-Before-Make Interval
tOPEN
see figure 4
Enable Turn-On Time
tON(EN)
Enable Turn-Off Time
tOFF(EN)
Room
Full
Room
Full
Room
Full
Room
Full
Room
15
pC
Room
- 69
dB
µA
pF
Dynamic Characteristics
see figure 3
Charge Injection
Off Isolation
h
Source Off Capacitance
Drain Off Capacitance
Drain On Capacitance
Q
OIRR
CS(off)
CD(off)
CD(on)
VS = 0 V, CL = 1 nF, RS = 0 
VEN = 0 V, RL = 1 k
f = 100 kHz
VEN = 0 V, VS = 0 V, f = 1 MHz
VEN = 0 V
VD = 0 V
f = 1 MHz
50
350
450
25
10
150
8
Room
130
DG407
Room
65
DG406
Room
140
DG407
Room
70
Room
Full
Room
Full
Room
Full
Room
Full
13
25
10
200
400
150
300
70
Room
350
450
200
400
150
300
ns
pF
Power Supplies
Positive Supply Current
I+
Negative Supply Current
I-
Positive Supply Current
I+
Negative Supply Current
I-
VEN = VA = 0 or 5 V
VEN = 2.4 V, VA = 0 V
www.vishay.com
4
- 0.01
30
75
-1
- 10
50
- 0.01
30
75
-1
- 10
500
900
- 20
- 20
500
700
µA
- 20
- 20
Document Number: 70061
S11-0179-Rev. J, 07-Feb-11
DG406, DG407
Vishay Siliconix
SPECIFICATIONSa (for Single Supply)
Parameter
Analog Switch
Symbol
Analog Signal Rangee
Drain-Source
On-Resistance
RDS(on) Matching Between
Channelsg
Source Off Leakage Current
VANALOG
Drain Off Leakage Current
Drain On Leakage Current
RDS(on)
RDS(on)
IS(off)
ID(off)
ID(on)
Test Conditions
Unless Otherwise Specified
V+ = 12 V, V- = 0 V
VAL = 0.8 V, VAH = 2.4 Vf
A Suffix
D Suffix
- 55 °C to 125 °C - 40 °C to 85 °C
Temp.b
Typ.c
Full
VD = 3 V, 10 V, IS = - 1 mA
sequence each switch on
VEN = 0 V
VD = 10 V or 0.5 V
VS = 0.5 V or 10 V
DG406
Room
90
Room
5
Room
0.01
Room
0.04
Min.d
Max.d
Min.d
Max.d
Unit
0
12
0
12
V
120

120
%
DG407
Room
0.04
DG406
Room
0.04
DG407
Room
0.04
VS1 = 8 V, VS8 = 0 V, VIN = 2.4 V
Room
300
450
Room
250
600
600
300
300
VS = VD = ± 10
sequence each
switch on
nA
Dynamic Characteristics
Switching Time of Multiplexer
tOPEN
Enable Turn-On Time
tON(EN)
Enable Turn-Off Time
tOFF(EN)
VINH = 2.4 V, VINL = 0 V
VS1 = 5 V
Room
150
Q
CL = 1 nF, VS = 6 V, RS = 0
Room
20
13
VEN = 0 V or 5 V, VA = 0 V or 5 V
Room
Full
Room
Full
Charge Injection
450
ns
pC
Power Supplies
Positive Supply Current
I+
Negative Supply Current
I-
- 0.01
30
75
- 20
- 20
30
75
- 20
- 20
µA
Notes:
a. Refer to PROCESS OPTION FLOWCHART.
b. Room = 25 °C, Full = as determined by the operating temperature suffix.
c. Typical values are for DESIGN AID ONLY, not guaranteed nor subject to production testing.
d. The algebraic convention whereby the most negative value is a minimum and the most positive a maximum, is used in this data sheet.
e. Guaranteed by design, not subject to production test.
f. VIN = input voltage to perform proper function.
g. RDS(on) = RDS(on) max. - RDS(on) min.
h. Worst case isolation occurs on Channel 4 due to proximity to the drain pin.
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation
of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum
rating conditions for extended periods may affect device reliability.
Document Number: 70061
S11-0179-Rev. J, 07-Feb-11
www.vishay.com
5
DG406, DG407
Vishay Siliconix
TYPICAL CHARACTERISTICS (TA = 25 °C, unless otherwise noted)
160
80
RDS(on) - On-Resistance (Ω)
RDS(on) - On-Resistance (Ω)
70
120
± 5V
80
±8V
± 10 V
± 12 V
± 15 V
40
125 °C
60
85 °C
50
25 °C
40
0 °C
30
- 40 °C
20
- 55 °C
± 20 V
10
0
- 20
- 12
-4
4
VD - Drain Voltage (V)
12
V+ = 15 V
V- = - 15 V
0
- 15
20
- 10
-5
0
5
10
15
VD - Drain Voltage (V)
RDS(on) vs. VD and Temperature
RDS(on) vs. VD and Supply
120
V+ = 7.5 V
80
200
I D , I S - Current (pA)
RDS(on) - On-Resistance (Ω)
V+ = 15 V
V- = - 15 V
VS = - VD for ID(off)
VD = V S(open) for ID(on)
V- = 0 V
240
160
10 V
120
12 V
15 V
80
20 V
40
IS(off)
0
DG406 ID(on), ID(off)
- 40
22 V
DG407 ID(on), ID(off)
- 80
40
- 120
- 15
0
0
4
8
12
16
20
0
5
10
15
350
100 nA
V+ = 15 V
V- = - 15 V
VD = "14 V
300
tTRANS
250
1 nA
ID(on), ID(off)
Time (ns)
I D , I S - Current
-5
ID , IS Leakage Currents vs. Analog Voltage
RDS(on) vs. VD and Supply
10 nA
- 10
VS , V D - Source Drain Voltage (V)
VD - Drain Voltage (V)
100 pA
200
tON(EN)
150
IS(off)
10 pA
100
tOFF(EN)
1 pA
50
0.1 pA
- 55 - 35 - 15
www.vishay.com
6
0
5
25
45
65
85
105
125
±5
± 10
± 15
Temperature (°C)
VSUPPLY - Supply Voltage (V)
ID , IS Leakages vs. Temperature
Switching Times vs. Bipolar Supplies
± 20
Document Number: 70061
S11-0179-Rev. J, 07-Feb-11
DG406, DG407
Vishay Siliconix
TYPICAL CHARACTERISTICS (TA = 25 °C, unless otherwise noted)
70
700
600
60
500
50
tTRANS
400
Q (pC)
Time (ns)
V- = 0 V
300
40
V+ = 12 V,
V- = 0 V
30
tON(EN)
200
V+ = 15 V,
V- = - 15 V
20
100
10
tOFF(EN)
0
5
10
15
0
- 15
20
- 10
-5
V+ - Supply Voltage (V)
0
5
10
VS - Source Voltage (V)
Switching Times vs. Single Supply
Charge Injection vs. Analog Voltage
- 140
10
EN = 5 V
AX = 0 or 5 V
8
- 120
I+
6
- 100
4
I - Current (mA)
ISOL (dB)
15
- 80
- 60
2
0
-2
IGND
-4
- 40
I-6
- 20
-8
0
- 10
100
1K
10K
100K
1M
10M
10
100
1K
f - Frequency (Hz)
Off-Isolation vs. Frequency
1M
10M
3
V+ = 15 V
V- = - 15 V
220
2
tTRANS
V TH (V)
Time (ns)
100K
Supply Currents vs. Switching Frequency
300
260
10K
f - Frequency (Hz)
tON(EN)
180
140
1
100
tOFF(EN)
0
60
- 55 - 35 - 15
5
25
45
65
85
105
125
0
5
10
15
Temperature (°C)
VSUPPLY - Supply Voltage (V)
tON/tOFF vs. Temperature
Switching Threshold vs. Supply Voltage
Document Number: 70061
S11-0179-Rev. J, 07-Feb-11
20
www.vishay.com
7
DG406, DG407
Vishay Siliconix
SCHEMATIC DIAGRAM (Typical Channel)
V+
VREF
GND
D
A0
V+
Level
Shift
AX
V-
Decode/
Drive
S1
V+
EN
Sn
V-
Figure 1.
TEST CIRCUITS
+ 15 V
+ 2.4 V
V+
EN
A2
A1
± 10 V
S1
A3
S2 - S 15
DG406
S16
A0
± 10 V
VO
D
GND
Logic
Input
V-
tr < 20 ns
tf < 20 ns
3V
50 %
0V
50 Ω
35 pF
300 Ω
- 15 V
VS1
90 %
Switch
Output
+ 15 V
+ 2.4 V
V+
EN
A2
VO
S1b
0V
90 %
± 10 V
VS8
*
DG407
S8b
A1
A0
tTRANS
± 10 V
S1 ON
Db
GND
tTRANS
S8 ON
VO
V-
50 Ω
300 Ω
35 pF
- 15 V
* = S1a - S 8a, S2b S ± 7b, Da
Figure 2. Transition Time
www.vishay.com
8
Document Number: 70061
S11-0179-Rev. J, 07-Feb-11
DG406, DG407
Vishay Siliconix
TEST CIRCUITS
+ 15 V
V+
A3
-5V
S1
A2
S2 - S 16
A1
DG406
A0
VO
D
EN
GND
V35 pF
300 Ω
50 Ω
Logic
Input
- 15 V
tr < 20 ns
tf < 20 ns
3V
50 %
0V
tON(EN)
0V
+ 15 V
V+
A2
S1b
S1a - S 8a
S2b - S 8b
A1
A0
tOFF(EN)
Switch
Output
-5V
VO
90 %
90 %
VO
DG407
Da and Db
EN
GND
VO
V-
35 pF
50 Ω
300 Ω
- 15 V
Figure 3. Enable Switching Time
+ 15 V
Logic
Input
V+
EN
+ 2.4 V
All S and Da
A3
A2
A1
+5V
tr < 20 ns
tf < 20 ns
3V
50 %
0V
DG406
DG407
A0
GND
50 Ω
VS
VO
D,D b
80 %
Switch
Output
V300 Ω
35 pF
VO
- 15 V
0V
tOPEN
Figure 4. Break-Before-Make Interval
Document Number: 70061
S11-0179-Rev. J, 07-Feb-11
www.vishay.com
9
DG406, DG407
Vishay Siliconix
APPLICATIONS HINTS
Sampling speed is limited by two consecutive events: the
transition time of the multiplexer, and the settling time of the
sampled signal at the output.
For the DG406 then, at room temp and for 12-bit accuracy,
using the maximum limits:
tTRANS is given on the data sheet. Settling time at the load
depends on several parameters: RDS(on) of the multiplexer,
source impedance, multiplexer and load capacitances,
charge injection of the multiplexer and accuracy desired.
fs =
The settling time for the multiplexer alone can be derived
from the model shown in figure 5. Assuming a low
impedance signal source like that presented by an op amp or
a buffer amplifier, the settling time of the RC network for a
given accuracy is equal to n:
% ACCURACY
# BITS
N
0.25
8
6
0.012
12
9
0.0017
15
11
(2)
(3)
From the sampling theorem, to properly recover the original
signal, the sampling frequency should be more than twice
the maximum component frequency of the original signal.
This assumes perfect bandlimiting. In a real application
sampling at three to four times the filter cutoff frequency is a
good practice.
fc =
1
x fs = 173 kHz
4
(4)
From this we can see that the DG406 can be used to sample
16 different signals whose maximum component frequency
can be as high as 173 kHz. If for example, two channels are
used to double sample the same incoming signal then its
cutoff frequency can be doubled.
VOUT
RS = 0
CD(on)
Figure 5. Simplified Model of One Multiplexer Channel
The maximum sampling frequency of the multiplexer is:
1
N(tSETTLING + tTRANS)
(1)
where N = number of channels to scan
tSETTLING = n = n x RDS(on) x CD(on)
To
Sensor 1
To
Sensor 8
or
fs = 694 kHz
Therefore from equation 2 above:
R DS(on)
fs =
1
16 (9 x 100 Ω x 10-12F) + 300 x 10-12s
Analog
Multiplexer
The block diagram shown in Figure 6 illustrates a typical data
acquisition front end suitable for low-level analog signals.
Differential multiplexing of small signals is preferred since
this method helps to reject any common mode noise. This is
especially important when the sensors are located at a
distance and it may eliminate the need for individual
amplifiers. A low RDS(on), low leakage multiplexer like the
DG407 helps to reduce measurement errors. The low power
dissipation of the DG407 minimizes on-chip thermal
gradients which can cause errors due to temperature
mismatch along the parasitic thermocouple paths. Please
refer to Application Note AN203 for additional information.
Inst
Amp
DG407
S/H
12-Bit
A/D
Converter
Controller
Figure 6. Measuring low-level analog signals is more accurate when using a differential multiplexing technique
Vishay Siliconix maintains worldwide manufacturing capability. Products may be manufactured at one of several qualified locations. Reliability data for Silicon
Technology and Package Reliability represent a composite of all qualified locations. For related documents such as package/tape drawings, part marking, and
reliability data, see www.vishay.com/ppg?70061.
www.vishay.com
10
Document Number: 70061
S11-0179-Rev. J, 07-Feb-11
Package Information
Vishay Siliconix
PDIP: 28ĆLEAD
28
27
26
25
24
23
22
21
20
19
18
17
16
15
E1
1
2
3
4
5
6
7
8
9
10
11
12
13
E
14
D
Q1
S
A(1)
A
L
A1
L
15°
MAX.
C
e1
B1
Dim
A
A1
B
B1
C
D
E
E1
e1
eA
L
Q1
S
eA
B
MILLIMETERS
Min
Max
INCHES
Min
Max
2.29
5.08
0.090
0.200
0.39
1.77
0.015
0.070
0.38
0.56
0.015
0.022
0.89
1.65
0.035
0.065
0.204
0.30
0.008
0.012
35.10
39.70
1.380
1.565
15.24
15.88
0.600
0.625
13.21
14.73
0.520
0.580
2.29
2.79
0.090
0.110
14.99
15.49
0.590
0.610
2.60
5.08
0.100
0.200
0.95
2.345
0.0375
0.0925
0.995
2.665
0.0375
0.105
ECN: S-03946—Rev. F, 09-Jul-01
DWG: 5488
Document Number: 71243
06-Jul-01
www.vishay.com
1
Package Information
Vishay Siliconix
PLCC: 28-LEAD
D-SQUARE
MILLIMETERS
MIN.
MAX.
A
4.20
4.57
2.29
3.04
A1
0.51
A2
B
0.331
0.553
0.661
0.812
B1
D
12.32
12.57
11.430
11.582
D1
9.91
10.92
D2
1.27 BSC
e1
ECN: T09-0766-Rev. D, 28-Sep-09
DWG: 5491
DIM.
A2
INCHES
MIN.
MAX.
0.165
0.180
0.090
0.120
0.020
0.013
0.021
0.026
0.032
0.485
0.495
0.450
0.456
0.390
0.430
0.050 BSC
e1
B1
D2
B
D1-SQUARE
A1
D
A
Document Number: 71264
28-Sep-09
0.101 mm
0.004"
www.vishay.com
1
Package Information
www.vishay.com
Vishay Siliconix
SOIC (WIDE-BODY): 28-LEADS
0.06 0.002D
CAVITY NO.
0.3525 0.001
0.334 0.005
28 27
26 25 24 23 22 21
20 19
18
R0.004
17 16 15
0.010
0.1475 0.001
R0.008
0.295 0.001
R0.009
1
2 3
4
5
6
7
8
9
10
11
12 13 14
4°
R0.004
2°
0.032 0.005
0.070 0.005
0.055 0.005
DETAIL A
PIN 1 INDICATOR
0.047 0.007 0.001 dp
SURFACE POLISHED
0.334 0.005
0.291 0.001
0.091 0.001
0.020 45°
0.705 0.001
0.098 0.002
R0.004
0.00825 ± 0.00325
0.041 0.001
0.050 TYP.
0.017 0.0003
7°(4 )
0.295 0.001
0.406 0.004
DETAIL A
All Dimensions In Inches
ECN: E11-2209-Rev. D, 01-Aug-11
DWG: 5850
Revision: 01-Aug-11
1
Document Number: 71268
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Package Information
Vishay Siliconix
28ĆLEAD LCC
A1
D
L1
A
28
e
1
2
L
Document Number: 71278
02-Jul-01
E
Dim
A
A1
B
D
E
e
L
L1
MILLIMETERS
Min
Max
INCHES
Min
Max
1.37
2.24
0.054
0.088
1.63
2.54
0.064
0.100
0.56
0.71
0.022
0.028
11.23
11.63
0.442
0.458
11.23
11.63
0.442
0.458
1.27 BSC
0.050 BSC
1.14
1.40
0.045
0.055
1.96
2.36
0.077
0.093
ECN: S-03946—Rev. B, 09-Jul-01
DWG: 5319
B
www.vishay.com
1
Package Information
Vishay Siliconix
CERDIP: 28ĆLEAD
28
E1
E
1
2
3
D
Q1
S
A
L1
A1
B1
L
e1
C
B
eA
MILLIMETERS
Dim
A
A1
B
B1
C
D
E
E1
e1
eA
L
L1
Q1
S
∝
INCHES
Min
Max
Min
Max
4.06
5.92
0.160
0.232
0.38
1.52
0.015
0.060
0.38
0.51
0.015
0.020
1.14
1.65
0.045
0.065
0.20
0.30
0.008
0.012
36.58
37.08
1.440
1.460
15.24
15.88
0.600
0.625
12.95
13.46
0.510
0.530
2.54 BSC
∝
0.100 BSC
15.24 BSC
0.600 BSC
3.18
3.81
0.125
0.150
3.81
5.08
0.150
0.200
1.27
2.16
0.050
0.085
1.52
2.29
0.060
0.090
0°
15°
0°
15°
ECN: S-03946—Rev. E, 09-Jul-01
DWG: 5434
Document Number: 71283
03-Jul-01
www.vishay.com
1
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free
requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference
to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21
conform to JEDEC JS709A standards.
Revision: 02-Oct-12
1
Document Number: 91000
Similar pages