DG9451, DG9453 Vishay Siliconix 8-Channel, Dual 4-Channel, Triple 2-Channel Multiplexers DESCRIPTION FEATURES The DG9451, and DG9453 are high precision single and dual supply CMOS analog multiplexers. DG9451 is an 8-channel multiplexer, and the DG9453 is a triple 2-channel multiplexer or triple SPDT. Designed to operate from a + 2.7 V to + 12 V single supply or from a ± 2.5 V to ± 5 V dual supplies, the DG9451, and DG9453 are fully specified at + 12 V, + 5 V and ± 5 V. All control logic inputs have guaranteed 1.4 V high limit when operating from + 5 V or ± 5 V supplies and 1.65 V when operating from a + 12 V supply. The DG9451, and DG9453 are precision multiplexers of low leakage, low charge injection, and low parasitic capacitance. They conduct equally well in both directions, offer rail to rail analog signal handling and can be used both as multiplexers as well as de-multiplexers. The DG9451, and DG9453 operating temperature is specified from - 40 °C to + 85 °C and are available in 16 pin TSSOP and the ultra compact 1.8 mm x 2.6 mm miniQFN16 packages. • Halogen-free According to IEC 61249-2-21 Definition • + 2.7 V to + 12 V single supply operation ± 2.5 V to ± 5 V dual supply operation • Fully specified at + 12 V, + 5 V, ± 5 V • Low charge injection (< 0.5 pC typ.) • High bandwidth: 270 MHz • Low switch capacitance (Cs(off) 1 pF typ.) • Good isolation and crosstalk performance (typ. - 44 dB at 100 MHz) • MiniQFN16 package (1.8 mm x 2.6 mm) • Compliant to RoHS directive 2002/95/EC APPLICATIONS • • • • • • Data acquisition Medical and healthcare devices Control and automation equipments Test instruments Touch panels Consumer FUNCTIONAL BLOCK DIAGRAM AND PIN CONFIGURATION DG9453 mQFN-16 DG9451 mQFN-16 X6 X4 VCC X2 Y0 Y1 VCC Y 16 15 14 13 16 15 14 13 X 1 12 X1 Z1 1 12 X X7 2 11 X0 Z 2 11 X1 X5 3 10 X3 Z0 3 10 X0 ENABLE 4 9 A ENABLE 4 9 A Logic 5 6 77 8 5 6 77 8 VEE GND C B VEE GND C B Top View Top View Yxx Pin 1 Device Marking: Yxx for DG9451 (miniQFN16) 4xx for DG9453 xx = Date/Lot Traceability Code Document Number: 65020 S10-2275-Rev. B, 04-Oct-10 www.vishay.com 1 DG9451, DG9453 Vishay Siliconix TRUTH TABLE Select Inputs On Switches Enable Input C B A DG9451 DG9453 H X X X All Switches Open All Switches Open L L L L X to X0 X to X0, Y to Y0, Z to Z0 L L L H X to X1 X to X1, Y to Y0, Z to Z0 L L H L X to X2 X to X0, Y to Y1, Z to Z0 L L H H X to X3 X to X1, Y to Y1, Z to Z0 L H L L X to X4 X to X0, Y to Y0, Z to Z1 L H L H X to X5 X to X1, Y to Y0, Z to Z1 L H H L X to X6 X to X0, Y to Y1, Z to Z1 L H H H X to X7 X to X1, Y to Y1, Z to Z1 ORDERING INFORMATION Temp. Range Package Part Number DG9451, DG9453 - 40 °C to 125 °Ca DG9451EN-T1-E4 16-Pin miniQFN DG9453EN-T1-E4 Notes: a. - 40 °C to 85 °C datasheet limits apply. ABSOLUTE MAXIMUM RATINGS (TA = 25 °C, unless otherwise noted) Parameter Limit V+ to VGND to VDigital Inputsa, Unit 14 7 VS, VD Continuous Current (Any terminal) 30 Peak Current, S or D (Pulsed 1 ms, 10 % duty cycle) 100 Storage Temperature Power Dissipationb 16-Pin miniQFNc, d Thermal Resistanceb 16-Pin miniQFNd Latch-up (per JESD78) V (V-) - 0.3 to (V+) + 0.3 or 30 mA, whichever occurs first mA - 65 to 150 °C 525 mW 152 °C/W > 300 mA Notes: a. Signals on SX, DX, or INX exceeding V+ or V- will be clamped by internal diodes. Limit forward diode current to maximum current ratings. b. All leads welded or soldered to PC board. c. Derate 6.6 mW/°C above 70 °C. d. Manual soldering with iron is not recommended for leadless components. The miniQFN-16 is a leadless package. The end of the lead terminal is exposed copper (not plated) as a result of the singulation process in manufacturing. A solder fillet at the exposed copper lip cannot be guaranteed and is not required to ensure adequate bottom side solder interconnection. www.vishay.com 2 Document Number: 65020 S10-2275-Rev. B, 04-Oct-10 DG9451, DG9453 Vishay Siliconix SPECIFICATIONS FOR DUAL SUPPLIES Parameter Test Conditions Unless Otherwise Specified VCC = + 5 V, VEE = - 5 V VIN(A, B, C and ENABLE) = 1.4 V, 0.3 Va Temp.b VANALOG Full RON IS = 1 mA, VD = - 3 V, 0 V, + 3 V Room Full 66 100 125 100 118 RON IS = 1 mA, VD = ± 3 V Room Full 3 6 10 6 8 RFLATNESS IS = 1 mA, VD = - 3 V, 0 V, + 3 V Room Full 10.2 16 20 16 18 Room Full ± 0.02 -1 - 50 1 50 -1 -5 1 5 Room Full ± 0.02 -1 - 50 1 50 -1 -5 1 5 Room Full ± 0.02 -1 - 50 1 50 -1 -5 1 5 Symbol - 40 °C to 125 °C - 40 °C to 85 °C Typ.c Min.d Max.d Min.d 5 -5 Max.d Unit 5 V Analog Switch On-Resistance On-Resistance Match On-Resistance Flatness Switch Off Leakage Current Channel On Leakage Current IS(off) ID(off) ID(on) V+ = 5.5 V, V- = - 5.5 V, VD = ± 4.5 V, VS = 4.5 V ± Analog Signal Rangee V+ = 5.5 V, V- = - 5.5 V, VS = VD = ± 4.5 V -5 nA Digital Control VIN(A, B, C and ENABLE) Low VIL Full VIN(A, B, C and ENABLE) High VIH Full Input Current, VIN Low IIL VIN(A, B, C and ENABLE) under test = 0.3 V Full 0.01 -1 1 -1 1 Input Current, VIN High IIH VIN(A, B, C and ENABLE) under test = 1.4 V Full 0.01 -1 1 -1 1 Input Capacitancee CIN f = 1 MHz Room 3.4 Room Full 66 180 218 180 207 Room Full 152 250 295 250 282 Room Full 60 125 136 125 131 Room Full 32 13 13 f = 100 kHz Room < - 90 - 65 0.3 1.4 0.3 1.4 V µA pF Dynamic Characteristics Transition Time tTRANS Enable Turn-On Time tON Enable Turn-Off Time tOFF Break-Before-Make Time Delay Off Isolatione RL = 300 , CL = 35 pF see figure 1, 2, 3 tD OIRR RL = 50 , CL = 15 pF Channel-to-Channel Crosstalke Bandwith, 3 dB Charge Injectione Source Off Capacitancee XTALK BW Q CS(off) RL = 50 f = 1 MHz CD(off) f = 1 MHz Channel On Capacitancee CD(on) f = 1 MHz Document Number: 65020 S10-2275-Rev. B, 04-Oct-10 THD Room Room - 44 f = 100 kHz Room < - 90 f = 10 MHz Room - 74 f = 100 MHz Room - 44 DG9451 Room 270 DG9453 Room 525 Vg = 0 V, Rg = 0 , CL = 1 nF Drain Off Capacitancee Total Harmonic Distortione f = 10 MHz f = 100 MHz Room 0.20 DG9451 Room 1 DG9453 Room 1 DG9451 Room 10 DG9453 Room 3 DG9451 Room 16 DG9453 Room 8 Room 0.01 Signal = 1 VRMS, 20 Hz to 20 kHz, RL = 600 ns dB MHz pC pF % www.vishay.com 3 DG9451, DG9453 Vishay Siliconix SPECIFICATIONS FOR DUAL SUPPLIES Parameter Symbol Test Conditions Unless Otherwise Specified VCC = + 5 V, VEE = - 5 V VIN(A, B, C and ENABLE) = 1.4 V, 0.3 Va - 40 °C to 125 °C - 40 °C to 85 °C Temp.b Typ.c Min.d Max.d Min.d Room Full 0.05 Room Full - 0.05 -1 - 10 -1 - 10 Room Full - 0.05 -1 - 10 -1 - 10 Max.d Unit Power Supplies Power Supply Current I+ Negative Supply Current I- Ground Current VCC = + 5 V, VEE = - 5 V VIN(A, B, C and ENABLE) = 0 or 5 V IGND 1 10 1 10 µA SPECIFICATIONS FOR UNIPOLAR SUPPLIES Parameter Symbol Test Conditions Unless Otherwise Specified VCC = + 5 V, VEE = 0 V VIN(A, B, C and ENABLE) = 1.4 V, 0.3 Va Temp.b - 40 °C to 125 °C - 40 °C to 85 °C Typ.c Min.d Max.d Min.d 5 0 Max.d Unit 5 V Analog Switch Analog Signal Rangee On-Resistance On-Resistance Match On-Resistance Flatness Switch Off Leakage Current Channel On Leakage Current VANALOG Full RON IS = 1 mA, VD = 0 V, + 3.5 V Room Full 105 165 205 165 194 RON IS = 1 mA, VD = + 3.5 V Room Full 3.2 8 13 8 10 RFLATNESS IS = 1 mA, VD = 0 V, + 3 V Room Full 17 26 30 26 28 Room Full ± 0.02 -1 - 50 1 50 -1 -5 1 5 Room Full ± 0.02 -1 - 50 1 50 -1 -5 1 5 Room Full ± 0.02 -1 - 50 1 50 -1 -5 1 5 IS(off) ID(off) ID(on) V+ = + 5.5 V, V- = 0 V VD = 1 V/4.5 V, VS = 4.5 V/1 V V+ = + 5.5 V, V- = 0 V VD = VS = 1 V/4.5 V 0 nA Digital Control VIN(A, B, C and ENABLE) Low VIL Full VIN(A, B, C and ENABLE) High VIH Full 0.3 1.4 0.3 1.4 Input Current, VIN Low IL VIN(A, B, C and ENABLE) under test = 0.3 V Full 0.01 -1 1 -1 1 Input Current, VIN High IH VIN(A, B, C and ENABLE) under test = 1.4 V Full 0.01 -1 1 -1 1 Room Full 79 205 295 205 285 Room Full 220 335 403 335 393 Room Full 93 150 173 150 163 Room Full 36 20 20 Full 0.81 Room < - 90 Room < - 90 V µA Dynamic Characteristics Transition Time tTRANS Enable Turn-On Time tON Enable Turn-Off Time tOFF Break-Before-Make Time Delay tD Charge Injectione Q Off Isolation e Channel-to-Channel Crosstalke www.vishay.com 4 OIRR XTALK RL = 300 , CL = 35 pF See Figure 1, 2, 3 Vg = 0 V, Rg = 0 , CL = 1 nF RL = 50 , CL = 15 pF f = 100 kHz ns pC dB Document Number: 65020 S10-2275-Rev. B, 04-Oct-10 DG9451, DG9453 Vishay Siliconix SPECIFICATIONS FOR UNIPOLAR SUPPLIES Parameter Symbol Test Conditions Unless Otherwise Specified VCC = + 5 V, VEE = 0 V VIN(A, B, C and ENABLE) = 1.4 V, 0.3 Va Temp.b - 40 °C to 125 °C - 40 °C to 85 °C Typ.c Min.d Max.d Min.d Max.d Unit Dynamic Characteristics Source Off Capacitancee CS(off) f = 1 MHz Drain Off Capacitancee CD(off) f = 1 MHz Channel On Capacitancee CD(on) f = 1 MHz DG9451 Room DG9453 Room 1 1 DG9451 Room 11 DG9453 Room 3 DG9451 Room 17 DG9453 Room 9 Room Full 0.05 Room Full - 0.05 -1 - 10 -1 - 10 Room Full - 0.05 -1 - 10 -1 - 10 pF Power Supplies Power Supply Current I+ Negative Supply Current I- Ground Current VIN(A, B, C and ENABLE) = 0 V or 5 V IGND 1 10 1 10 µA SPECIFICATIONS FOR UNIPOLAR SUPPLIES Parameter Symbol Test Conditions Unless Otherwise Specified VCC = + 12 V, VEE = 0 V VIN(A, B, C and ENABLE) = 1.6 V, 0.5 Va Temp.b - 40 °C to 125 °C - 40 °C to 85 °C Typ.c Min.d Max.d Min.d Max.d Unit 0 12 0 12 V Analog Switch Analog Signal Rangee On-Resistance On-Resistance Match On-Resistance Flatness Switch Off Leakage Current Channel On Leakage Current VANALOG Full RON IS = 1 mA, VD = 0.7 V, 6.0 V, 11.3 V Room Full 68 105 143 105 137 RON IS = 1 mA, VD = + 0.7 V Room Full 4 7 10 7 8 RFLATNESS IS = 1 mA, VD = 0.7 V, + 11.3 V Room Full 32 45 49 45 47 Room Full ± 0.02 -1 - 50 1 50 -1 -5 1 5 Room Full ± 0.02 -1 - 50 1 50 -1 -5 1 5 Room Full ± 0.02 -1 - 50 1 50 -1 -5 1 5 IS(off) ID(off) ID(on) V+ = + 12 V, V- = 0 V VD = 1 V/11 V, VS = 11 V/1 V V+ = + 12 V, V- = 0 V VD = VS = 1 V/11 V nA Digital Control VIN(A, B, C and ENABLE) Low VIL Full VIN(A, B, C and ENABLE) High VIH Full 0.5 1.6 0.5 1.6 Input Current, VIN Low IL VIN(A, B, C and ENABLE) under test = 0.5 V Full 0.01 -1 1 -1 1 Input Current, VIN High IH VIN(A, B, C and ENABLE) under test = 1.6 V Full 0.01 -1 1 -1 1 Room Full 55 135 166 135 155 Room Full 106 185 219 185 205 Room Full 65 130 144 130 137 Room Full 30 12 12 Room 0.79 V µA Dynamic Characteristics Transition Time tTRANS Enable Turn-On Time tON Enable Turn-Off Time tOFF Break-Before-Make Time Delay tD Charge Injectione Q Document Number: 65020 S10-2275-Rev. B, 04-Oct-10 RL = 300 , CL = 35 pF see figure 1, 2, 3 Vg = 0 V, Rg = 0 , CL = 1 nF ns pC www.vishay.com 5 DG9451, DG9453 Vishay Siliconix SPECIFICATIONS FOR UNIPOLAR SUPPLIES Parameter Test Conditions Unless Otherwise Specified VCC = + 12 V, VEE = 0 V VIN(A, B, C and ENABLE) = 1.6 V, 0.5 Va Temp.b Symbol - 40 °C to 125 °C - 40 °C to 85 °C Typ.c Min.d Max.d Min.d Max.d Unit Dynamic Characteristics Off Isolatione OIRR Channel-to-Channel Crosstalke XTALK RL = 50 , CL = 15 pF f = 100 kHz Source Off Capacitancee CS(off) f = 1 MHz Drain Off Capacitancee CD(off) f = 1 MHz Channel On Capacitancee CD(on) f = 1 MHz Room < - 90 Room < - 90 dB DG9451 Room 1 DG9453 Room 1 DG9451 Room 9 DG9453 Room 3 DG9451 Room 15 DG9453 Room 8 Room Full 0.05 Room Full - 0.05 -1 - 10 -1 - 10 Room Full - 0.05 -1 - 10 -1 - 10 pF Power Supplies Power Supply Current I+ Negative Supply Current I- VIN(A, B, C and ENABLE) = 0 V or 12 V IGND Ground Current 1 10 1 10 µA Notes: a. VIN = input voltage to perform proper function. b. Room - 25 °C, Full = as determined by the operating temperature suffix. c. Typical values are for DESIGN AID ONLY, not guaranteed nor subject to production testing. d. The algebraic convention whereby the most negative value is a minimum and the most positive a maximum, is used in this data sheet. e. Guaranteed by design, not subject to production test. Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. TYPICAL CHARACTERISTICS (25 °C, unless otherwise noted) 500 300 T = 25 °C IS = 1 mA 450 250 RON - On-Resistance (Ω) RON - On-Resistance (Ω) 400 VCC = 2.7 V 350 300 VCC = 3.0 V 250 VCC = 5.0 V 200 VCC = 10.8 V VCC = 12.0 V VCC = 13.2 V 150 T = 25 °C IS = 1 mA 100 VCC = + 5.0 V VEE = - 5.0 V 200 150 VCC = + 6.2 V VEE = - 6.2 V VCC = + 2.7 V VEE = - 2.7 V 100 50 50 0 0 2 4 6 8 10 12 14 VD - Analog Voltage (V) On-Resistance vs. VD and Signal Supply Voltage www.vishay.com 6 0 -7 -5 -3 -1 1 3 5 7 VD - Analog Voltage (V) On-Resistance vs. Analog Voltage and Temperature Document Number: 65020 S10-2275-Rev. B, 04-Oct-10 DG9451, DG9453 Vishay Siliconix TYPICAL CHARACTERISTICS (25 °C, unless otherwise noted) 400 500 VCC = 3.0 V, VEE = 0 V IS = 1 mA 450 VCC = 5.0 V, VEE = 0 V IS = 1 mA 350 350 RON - On-Resistance (Ω) RON - On-Resistance (Ω) 400 - 40 °C + 25 °C + 85 °C 300 + 125 °C 250 200 150 300 + 125 °C + 85 °C + 25 °C - 40 °C 250 200 150 100 100 50 50 0 0 0 0.5 1.0 1.5 2.0 2.5 0 3.0 0.5 1.0 1.5 3.0 3.5 4.0 4.5 5.0 On-Resistance vs. Analog Voltage and Temperature 250 250 VCC = 12.0 V, VEE = 0 V IS = 1 mA 250 VCC = 5.0 V, VEE = - 5 V IS = 1 mA 225 225 200 RON - On-Resistance (Ω) RON - On-Resistance (Ω) 2.5 VD - Analog Voltage (V) VD - Analog Voltage (V) On-Resistance vs. Analog Voltage and Temperature + 125 °C + 85 °C + 25 °C - 40 °C 200 175 150 125 100 75 + 125 °C + 85 °C + 25 °C - 40 °C 175 150 125 100 75 50 50 25 25 0 -5 0 0 1 2 3 4 5 6 7 8 9 10 11 12 -4 -3 -2 -1 0 1 2 3 4 5 VD - Analog Voltage (V) VD - Analog Voltage (V) On-Resistance vs. Analog Voltage and Temperature On-Resistance vs. Analog Voltage and Temperature 100 000 10 mA VCC = + 13.2 V VEE = 0 V VCC = + 5.0 V VEE = - 5.0 V 1 mA 10 000 100 µA Leakage Current (pA) I+ - Supply Current (A) 2.0 10 µA ICC 1 µA IGND 100 nA 10 nA 1000 100 ID(ON) ID(OFF) 10 IEE IS(OFF) 1 1 nA 100 pA 10 100 1K 10K 100K 1M 10M 0.1 - 60 - 20 20 60 100 Input Switching Frequency (Hz) Temperature (°C) Supply Current vs. Input Switching Frequency Leakage Current vs. Temperature Document Number: 65020 S10-2275-Rev. B, 04-Oct-10 140 www.vishay.com 7 DG9451, DG9453 Vishay Siliconix TYPICAL CHARACTERISTICS (25 °C, unless otherwise noted) 100 000 3.0 VCC = + 5.5 V VEE = - 5.5 V - 40 °C to + 125 °C 2.5 VT - Switching Threshold (V) Leakage Current (pA) 10 000 1000 100 10 ID(ON) ID(OFF) 1 - 20 20 1.5 VIH 1.0 VIL 0.5 IS(OFF) 0.1 - 60 2.0 60 100 0 140 0 2 4 Temperature (°C) Leakage Current vs. Temperature 1.50 QINJ - Charge Injection (pC) Loss, OIRR, XTALK (dB) 12 14 Loss - 10 VCC = + 5.0 V VEE = - 5.0 V RL = 50 Ω - 40 - 50 OIRR - 60 - 70 XTALK VCC = + 12.0 V VEE = 0 V VCC = + 5.0 V VEE = - 5.0 V 1.00 0.50 0 - 0.50 VCC = + 5.0 V VEE = 0 V - 1.00 - 80 - 1.50 - 90 - 100 100K 1M 10M 100M - 2.00 -5 1G -3 -1 1 3 5 7 9 11 Frequency (Hz) VS - Analog Voltage (V) DG9451 Insertion Loss, Off-Isolation, Crosstalk vs. Frequency DG9451 Charge Injection vs. Analog Voltage 400 10 DG9453 tON(EN), tOFF(EN) - Switching Time (ns) Loss 0 - 10 - 20 VCC = + 5.0 V VEE = - 5.0 V RL = 50 Ω - 30 Gain (dB) 10 2.00 DG9451 0 - 30 8 Switching Threshold vs. Supply Voltage 10 - 20 6 V+ - Supply Voltage (V) - 40 - 50 OIRR - 60 - 70 XTALK - 80 - 90 - 100 1 www.vishay.com 8 10 100 1000 10 000 350 300 VCC = + 5.0 V, VEE = 0 V, tON VCC = + 5.0 V, VEE = - 5.0 V, tON VCC = + 12.0 V, VEE = 0 V, tON VCC = + 5.0 V, VEE = - 5 V, tOFF VCC = + 5.0 V, VEE = 0 V, tOFF 250 200 150 100 50 0 - 60 VCC = + 12.0 V, VEE = 0 V, tOFF - 20 20 60 80 100 Frequency (Hz) Temperature (°C) Frequency Response Switching Time vs. Temperature 140 Document Number: 65020 S10-2275-Rev. B, 04-Oct-10 DG9451, DG9453 Vishay Siliconix TEST CIRCUITS VCC 1.8 V 50 % VA, B, C VCC 50 Ω X0 A B C VX0 VX0 or VY0 or VZ0 X1 - X6 90 % VO DG9451 X7 VX7 VO X ENABLE VEE GND 0V VX1 300 Ω 50 % VX7 VX3 or VY3 or VY1 or VZ1 90 % t TRANS 35 pF t TRANS X7 ON (DG9451) V0 or Y0 or Z0 ON or X1 or Y1 or Z1 ON (DG9453) VEE VCC VCC X0 or Y0 or Z0 VX0 or VY0 or VZ0 X1 or Y1 or Z1 VX1 or VY1 or VZ1 A or B or C 50 Ω DG9453 VO X or Y or Z ENABLE VEE GND 300 Ω 35 pF VEE Figure 1. Transition Time VCC 1.8 V VCC A B C X0 VCC VENABLE X1 - X7 DG9451 GND VX0 or VY0 or VZ0 VO X ENABLE 50 Ω 50 % 0V VEE 300 Ω 90 % VO 50 % 35 pF 90 % 0V t OFF VEE tON Disable X or Y or Z Enable X or Y or Z VCC VCC X0 or Y0 or Z0 A or B or C VCC X1 or Y1 or Z1 DG9453 ENABLE 50 Ω GND VO X or Y or Z VEE 300 Ω 35 pF VEE Figure 2. Enable Switching Time Document Number: 65020 S10-2275-Rev. B, 04-Oct-10 www.vishay.com 9 DG9451, DG9453 Vishay Siliconix TEST CIRCUITS VCC 1.8 V VCC X0 - X7 A B C 50 Ω VCC VA, B, C DG9451 50 % 0V VX0 or VY0 or VZ0 80 % VO X ENABLE VEE GND 300 Ω VO 35 pF 0V tD VEE VCC VCC X0, X1 or Y0, Y1 or Z0, Z1 A or B or C VCC 50 Ω DG9453 ENABLE GND VO X or Y or Z VEE 300 Ω 35 pF VEE Figure 3. Break-Before-Make VCC tr < 5 ns tf < 5 ns VCC Channel Select VCC A B C VENABLE Rg OFF ON OFF 0V Xx Vg VO GND VO X ENABLE VEE ΔVO 1 nF VEE Figure 4. Charge Injection www.vishay.com 10 Document Number: 65020 S10-2275-Rev. B, 04-Oct-10 DG9451, DG9453 Vishay Siliconix TEST CIRCUITS VCC VCC Network Analyzer Network Analyzer VCC VCC VIN A B C A B C X0 Rg = 50 Ω Vg VOUT X ENABLE VCC V EE GND VIN X0 VOUT X ENABLE VEE GND 50 Ω Rg = 50 Ω Vg 50 Ω VEE V EE Insertion Loss = 20 log Off Isolation = 20 log VOUT VIN Figure 5. Insertion Loss VOUT VIN Figure 6. Off Isolation VCC VCC Network Analyzer VCC A B C X0 VIN Vg Rg = 50 Ω VCC Channel Select A B C X0 | to | Xx X 50 Ω Xx ENABLE GND VOUT VEE 50 Ω ENABLE GND Impedance Analyzer X VEE VEE Crosstalk = 20 log VOUT VIN Figure 7. Crosstalk VEE Figure 8. Source, Drain Capacitance Vishay Siliconix maintains worldwide manufacturing capability. Products may be manufactured at one of several qualified locations. Reliability data for Silicon Technology and Package Reliability represent a composite of all qualified locations. For related documents such as package/tape drawings, part marking, and reliability data, see www.vishay.com/ppg?65020. Document Number: 65020 S10-2275-Rev. B, 04-Oct-10 www.vishay.com 11 Package Information Vishay Siliconix MINI QFN-16L (1) (2) (3) (4) L1 (5) (16) L D (12) (11) (10) (9) (8) (7) (15) (6) (16) (5) (15) (6) (14) (7) (13) (8) E (13) (14) (12) (11) (10) (9) (2) (1) (3) (4) e DIM C b A A1 BACK SIDE VIEW MILLIMETERS MIN. NAM INCHES MAX. MIN. NAM MAX. A 0.70 0.75 0.80 0.0275 0.0295 0.0315 A1 0 - 0.05 0 - 0.002 b 0.15 0.20 0.25 0.0059 0.0078 0.0098 C 0.15 0.20 0.25 0.0059 0.0078 0.0098 D 2.60 BSC 0.1023 BSC E 1.80 BSC 0.0708 BSC e 0.40 BSC 0.0157 BSC L 0.35 0.40 0.45 0.0137 0.0157 0.0177 L1 0.45 0.50 0.55 0.0177 0.0196 0.0216 ECN T-06380-Rev. A, 14-Aug-06 DWG: 5954 Document Number: 74323 14-Aug-06 www.vishay.com 1 Legal Disclaimer Notice Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 11-Mar-11 www.vishay.com 1