Data Delay DLO32F-2MD4 Ttl-interfaced, gated delay line oscillator Datasheet

DLO32F
data 3 
delay
devices, inc.
TTL-INTERFACED, GATED
DELAY LINE OSCILLATOR
(SERIES DLO32F)
FEATURES
•
•
•
•
•
•
•
PACKAGES
Continuous or keyable wave train
Synchronizes with arbitrary gating signal
Fits standard 14-pin DIP socket
Low profile
Auto-insertable
Input & outputs fully TTL interfaced & buffered
Available in frequencies from 2MHz to 40MHz
C1
GND
1
14
VCC
10
C2
8
GB
7
DLO32F-xx
DLO32F-xxA2
DLO32F-xxB2
DLO32F-xxM
C1
N/C
N/C
N/C
N/C
N/C
GND
DIP
Gull-Wing
J-Lead
Military DIP
1
2
3
4
5
6
7
14
13
12
11
10
9
8
VCC
N/C
N/C
N/C
C2
N/C
GB
Military SMD
DLO32F-xxMD1
DLO32F-xxMD4
FUNCTIONAL DESCRIPTION
PIN DESCRIPTIONS
The DLO32F-series device is a gated delay line oscillator. The device
produces a stable square wave which is synchronized with the falling edge
of the Gate Input (GB). The frequency of oscillation is given by the device
dash number (See Table). The two outputs (C1,C2) are in complementary
during oscillation, but both return to logic low when the device is disabled.
GB
C1
C2
VCC
GND
SERIES SPECIFICATIONS
•
•
•
•
•
•
•
•
Frequency accuracy:
Inherent delay (TE0):
Output skew:
Output rise/fall time:
Supply voltage:
Supply current:
Operating temperature:
Temperature coefficient:
GATE
(GB)
DASH NUMBER
SPECIFICATIONS
2%
3ns typical
2.5ns typical
2ns typical
5VDC ± 5%
40ma typical (7ma when disabled)
0° to 70° C
100 PPM/°C (See text)
tGR
tEO
tDO
CLOCK 1
(C1)
tCS
1/f0
CLOCK 2
(C2)
Figure 1: Timing Diagram
3/17/98
Part
Number
DLO32F-2
DLO32F-2.5
DLO32F-3
DLO32F-3.5
DLO32F-4
DLO32F-4.5
DLO32F-5
DLO32F-5.5
DLO32F-6
DLO32F-7
DLO32F-8
DLO32F-9
DLO32F-10
DLO32F-12
DLO32F-14
DLO32F-15
DLO32F-20
DLO32F-25
DLO32F-30
DLO32F-35
DLO32F-40
Frequency
(MHz)
2.0 ± 0.04
2.5 ± 0.05
3.0 ± 0.06
3.5 ± 0.07
4.0 ± 0.08
4.5 ± 0.09
5.0 ± 0.10
5.5 ± 0.11
6.0 ± 0.12
7.0 ± 0.14
8.0 ± 0.16
9.0 ± 0.18
10 ± 0.20
12 ± 0.24
14 ± 0.28
15 ± 0.30
20 ± 0.40
25 ± 0.50
30 ± 0.60
35 ± 0.70
40 ± 0.80
NOTE: Any dash number
between 2 and 40 not shown
is also available.
 1998 Data Delay Devices
Doc #98002
Gate Input
Clock Output 1
Clock Output 2
+5 Volts
Ground
DATA DELAY DEVICES, INC.
3 Mt. Prospect Ave. Clifton, NJ 07013
1
DLO32F
APPLICATION NOTES
THERMAL STABILITY
POWER SUPPLY BYPASSING
The delay line used internally to develop the clock
signals in the DLO32F has a thermal coefficient
of 100ppm/C. For low frequency units, this is also
the thermal coefficient of the output frequency.
For higher frequency units, however, other
internal effects must be considered, and the
actual thermal coefficient may be somewhat
higher.
The DLO32F relies on a stable power supply to
produce a repeatable frequency within the stated
tolerances. A 0.1uf capacitor from VCC to GND,
located as close as possible to the VCC pin, is
recommended. A wide VCC trace and a clean
ground plane should be used.
DEVICE SPECIFICATIONS
TABLE 1: ABSOLUTE MAXIMUM RATINGS
PARAMETER
DC Supply Voltage
Input Pin Voltage
Storage Temperature
Lead Temperature
SYMBOL
VCC
VIN
TSTRG
TLEAD
MIN
-0.3
-0.3
-55
MAX
7.0
VDD+0.3
150
300
UNITS
V
V
C
C
NOTES
10 sec
TABLE 2: DC ELECTRICAL CHARACTERISTICS
(0C to 70C, 4.75V to 5.25V)
PARAMETER
High Level Output Voltage
SYMBOL
VOH
Low Level Output Voltage
VOL
High Level Output Current
Low Level Output Current
High Level Input Voltage
Low Level Input Voltage
Input Clamp Voltage
Input Current at Maximum
Input Voltage
High Level Input Current
Low Level Input Current
Short-circuit Output Current
Output High Fan-out
Output Low Fan-out
IOH
IOL
VIH
VIL
VIK
IIHH
MIN
2.5
TYP
3.4
MAX
UNITS
V
0.35
0.5
V
-1.0
20.0
0.8
-1.2
0.1
mA
mA
V
V
V
mA
20
-0.6
-150
25
12.5
µA
mA
mA
Unit
Load
2.0
IIH
IIL
IOS
-60
NOTES
VCC = MIN, IOH = MAX
VIH = MIN, VIL = MAX
VCC = MIN, IOL = MAX
VIH = MIN, VIL = MAX
VCC = MIN, II = IIK
VCC = MAX, VI = 7.0V
VCC = MAX, VI = 2.7V
VCC = MAX, VI = 0.5V
VCC = MAX
TABLE 3: AC ELECTRICAL CHARACTERISTICS
(0C to 70C, 4.75V to 5.25V)
PARAMETER
Enable to Clock On (Inherent Delay)
Disable to Clock Off
Clock Skew
Gate Recovery Time
Doc #98002
3/17/98
SYMBOL
tEO
tDO
tCS
tGR
MIN
1.5
1.5
1.5
50
TYP
3.0
2.5
2.5
MAX
4.5
3.5
3.5
UNITS
ns
ns
ns
% of Clock Period
DATA DELAY DEVICES, INC.
Tel: 973-773-2299
Fax: 973-773-9672
http://www.datadelay.com
2
DLO32F
PACKAGE DIMENSIONS
14
10
8
Lead Material:
Nickel-Iron alloy 42
TIN PLATE
14
10
8
.410
TYP.
1
1
7
7
.280
MAX.
.780 MAX.
.820 MAX.
.290
MAX.
.020 .320
TYP. MAX.
.130
±.030
.015 TYP.
.010±.002
.018
TYP.
.070 MAX.
.350
MAX.
.600±.010
.020 TYP.
.200
TYP.
.018 TYP.
.600 TYP.
.300
TYP.
DLO32F-xxM (Military DIP)
DLO32F-xx (Commercial DIP)
.020 TYP.
.040
TYP.
.010 TYP.
.040
TYP.
.020 TYP.
10
14
.270
TYP.
10
.300
MAX.
.600
.790 MAX.
.050
TYP.
DLO32F-xxA2 (Commercial Gull-Wing)
.320
TYP.
.270
TYP.
1
.090
8
.430
TYP.
7
.050 TYP.
7
.110
.200
.600
.790 MAX.
.350
MAX.
.110
TYP.
DLO32F-xxB2 (Commercial J-Lead)
.650
.100
1
.100
.017
14
1
.510
MAX.
.300
TYP.
7
.510 MAX.
.360
TYP.
.065
TYP.
.008
.045
DLO32F-xxD1 (Commercial SMD)
DLO32F-xxMD1 (Military SMD)
Doc #98002
3/17/98
.050
.510 MAX.
.080
.025
8
.100
.300
.200 MAX. (Com)
.225 MAX. (Mil)
.065
TYP.
.510
MAX.
7
.050
.017
.300
TYP.
8
.100
.300
14
.200 MAX. (Com)
.225 MAX. (Mil)
.005
.080
.008
.360 TYP.
.065 TYP.
.065 TYP.
DLO32F-xxD4 (Commercial SMD)
DLO32F-xxMD4 (Military SMD)
DATA DELAY DEVICES, INC.
3 Mt. Prospect Ave. Clifton, NJ 07013
3
DLO32F
DELAY LINE AUTOMATED TESTING
TEST CONDITIONS
INPUT:
o
o
Ambient Temperature: 25 C ± 3 C
Supply Voltage (Vcc): 5.0V ± 0.1V
Input Pulse:
High = 3.0V ± 0.1V
Low = 0.0V ± 0.1V
Source Impedance:
50Ω Max.
Rise/Fall Time:
3.0 ns Max. (measured
between 0.6V and 2.4V )
Pulse Width Low:
PWIN = 10 x Clock Period
Period:
PERIN = 20 x Clock Period
OUTPUT:
Load:
Cload:
Threshold:
1 FAST-TTL Gate
5pf ± 10%
1.5V (Rising & Falling)
NOTE: The above conditions are for test only and do not in any way restrict the operation of the device.
FREQUENCY
COUNTER
PULSE
GENERATOR
OUT
GB
TRIG
DEVICE UNDER
TEST (DUT)
C1
IN
C2
TRIG
OSCILLOSCOPE
Test Setup
PERIN
PWIN
TFALL
INPUT
SIGNAL
TRISE
2.4V
1.5V
0.6V
2.4V
1.5V
0.6V
VIL
VIH
TEO
OUTPUT
SIGNAL
VOH
1.5V
1.5V
VOL
Timing Diagram For Testing
Doc #98002
3/17/98
DATA DELAY DEVICES, INC.
Tel: 973-773-2299
Fax: 973-773-9672
http://www.datadelay.com
4
Similar pages