NSC DM54LS283W 4-bit binary adders with fast carry Datasheet

54LS283/DM54LS283/DM74LS283
4-Bit Binary Adders with Fast Carry
General Description
Features
These full adders perform the addition of two 4-bit binary
numbers. The sum (R) outputs are provided for each bit and
the resultant carry (C4) is obtained from the fourth bit.
These adders feature full internal look ahead across all four
bits. This provides the system designer with partial lookahead performance at the economy and reduced package
count of a ripple-carry implementation.
The adder logic, including the carry, is implemented in its
true form meaning that the end-around carry can be accomplished without the need for logic or level inversion.
Y
Y
Y
Y
Y
Full-carry look-ahead across the four bits
Systems achieve partial look-ahead performance with
the economy of ripple carry
Typical add times
Two 8-bit words 25 ns
Two 16-bit words 45 ns
Typical power dissipation per 4-bit adder 95 mW
Alternate Military/Aerospace device (54LS283) is available. Contact a National Semiconductor Sales Office/
Distributor for specifications.
Connection Diagram
Dual-In-Line Package
TL/F/6421 – 1
Order Number 54LS283DMQB, 54LS283FMQB, 54LS283LMQB,
DM54LS283J, DM54LS283W, DM74LS283M or DM74LS283N
See NS Package Number E20A, J16A, M16A, N16E or W16A
C1995 National Semiconductor Corporation
TL/F/6421
RRD-B30M105/Printed in U. S. A.
54LS283/DM54LS283/DM74LS283 4-Bit Binary Adders with Fast Carry
June 1989
Absolute Maximum Ratings (Note)
Note: The ‘‘Absolute Maximum Ratings’’ are those values
beyond which the safety of the device cannot be guaranteed. The device should not be operated at these limits. The
parametric values defined in the ‘‘Electrical Characteristics’’
table are not guaranteed at the absolute maximum ratings.
The ‘‘Recommended Operating Conditions’’ table will define
the conditions for actual device operation.
If Military/Aerospace specified devices are required,
please contact the National Semiconductor Sales
Office/Distributors for availability and specifications.
Supply Voltage
7V
Input Voltage
7V
Operating Free Air Temperature Range
b 55§ C to a 125§ C
DM54LS and 54LS
DM74LS
0§ C to a 70§ C
Storage Temperature Range
b 65§ C to a 150§ C
Recommended Operating Conditions
Symbol
DM54LS283
Parameter
VCC
Supply Voltage
VIH
High Level Input Voltage
VIL
Low Level Input Voltage
IOH
High Level Output Current
IOL
Low Level Output Current
TA
Free Air Operating Temperature
DM74LS283
Units
Min
Nom
Max
Min
Nom
Max
4.5
5
5.5
4.75
5
5.25
2
2
V
0.7
0.8
V
b 0.4
b 0.4
mA
8
mA
70
§C
4
b 55
V
125
0
Electrical Characteristics over recommended operating free air temperature range (unless otherwise noted)
Symbol
Parameter
Min
Typ
(Note 1)
DM54
2.5
3.4
DM74
2.7
3.4
Conditions
Max
Units
b 1.5
V
VI
Input Clamp Voltage
VCC e Min, II e b18 mA
VOH
High Level Output
Voltage
VCC e Min, IOH e Max
VIL e Max, VIH e Min
Low Level Output
Voltage
VCC e Min, IOL e Max
VIL e Max, VIH e Min
DM54
0.25
0.4
DM74
0.35
0.5
IOL e 4 mA, VCC e Min
DM74
0.25
0.4
Input Current @ Max
Input Voltage
VCC e Max
VI e 7V
A, B
0.2
C0
0.1
High Level Input
Current
VCC e Max
VI e 2.7V
A, B
40
C0
20
Low Level Input
Current
VCC e Max
VI e 0.4V
Short Circuit
Output Current
VCC e Max
(Note 2)
ICC1
Supply Current
VCC e Max (Note 3)
19
34
mA
ICC2
Supply Current
VCC e Max (Note 4)
22
39
mA
VOL
II
IIH
IIL
IOS
A, B
b 0.8
C0
b 0.4
DM54
b 20
b 100
DM74
b 20
b 100
Note 1: All typicals are at VCC e 5V, TA e 25§ C.
Note 2: Not more than one output should be shorted at a time, and the duration should not exceed one second.
Note 3: ICC1 is measured with all outputs open, all B inputs low and all other inputs at 4.5V, or all inputs at 4.5V.
Note 4: ICC2 is measured with all outputs open and all inputs grounded.
2
V
V
mA
mA
mA
mA
Switching Characteristics at VCC e 5V and TA e 25§ C (See Section 1 for Test Waveforms and Output Load)
Symbol
Parameter
RL e 2 kX
From (Input)
To (Output)
CL e 15 pF
Min
Max
CL e 50 pF
Min
Units
Max
tPLH
Propagation Delay Time
Low to High Level Output
C0 to
R1, R2
24
28
ns
tPHL
Propagation Delay Time
High to Low Level Output
C0 to
R1, R2
24
30
ns
tPLH
Propagation Delay Time
Low to High Level Output
C0 to
R3
24
28
ns
tPHL
Propagation Delay Time
High to Low Level Output
C0 to
R3
24
30
ns
tPLH
Propagation Delay Time
Low to High Level Output
C0 to
R4
24
28
ns
tPHL
Propagation Delay Time
High to Low Level Output
C0 to
R4
24
30
ns
tPLH
Propagation Delay Time
Low to High Level Output
Ai or Bi
to Ri
24
28
ns
tPHL
Propagation Delay Time
High to Low Level Output
Ai or Bi
to Ri
24
30
ns
tPLH
Propagation Delay Time
Low to High Level Output
C0 to
C4
17
24
ns
tPHL
Propagation Delay Time
High to Low Level Output
C0 to
C4
17
25
ns
tPLH
Propagation Delay Time
Low to High Level Output
Ai or Bi
to C4
17
24
ns
tPHL
Propagation Delay Time
High to Low Level Output
Ai or Bi
to C4
17
26
ns
Function Table
TL/F/6421 – 3
H e High Level, L e Low Level
Note: Input conditions at A1, B1, A2, B2, and C0 are used to determine outputs R1 and R2 and the value of the internal carry C2. The values at C2, A3, B3, A4, and
B4 are then used to determine outputs R3, R4, and C4.
3
Logic Diagram
LS283
TL/F/6421 – 2
4
5
Physical Dimensions inches (millimeters)
Ceramic Leadless Chip Carrier Package (E)
Order Number 54LS283LMQB
NS Package Number E20A
16-Lead Ceramic Dual-In-Line Package (J)
Order Number 54LS283DMQB or DM54LS283J
NS Package Number J16A
6
Physical Dimensions inches (millimeters) (Continued)
16-Lead Small Outline Molded Package (M)
Order Number DM74LS283M
NS Package Number M16A
16-Lead Molded Dual-In-Line Package (N)
Order Number DM74LS283N
NS Package Number N16E
7
54LS283/DM54LS283/DM74LS283 4-Bit Binary Adders with Fast Carry
Physical Dimensions inches (millimeters) (Continued)
16-Lead Ceramic Flat Package (W)
Order Number 54LS283FMQB or DM54LS283W
NS Package Number W16A
LIFE SUPPORT POLICY
NATIONAL’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT
DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF NATIONAL
SEMICONDUCTOR CORPORATION. As used herein:
1. Life support devices or systems are devices or
systems which, (a) are intended for surgical implant
into the body, or (b) support or sustain life, and whose
failure to perform, when properly used in accordance
with instructions for use provided in the labeling, can
be reasonably expected to result in a significant injury
to the user.
National Semiconductor
Corporation
1111 West Bardin Road
Arlington, TX 76017
Tel: 1(800) 272-9959
Fax: 1(800) 737-7018
2. A critical component is any component of a life
support device or system whose failure to perform can
be reasonably expected to cause the failure of the life
support device or system, or to affect its safety or
effectiveness.
National Semiconductor
Europe
Fax: (a49) 0-180-530 85 86
Email: cnjwge @ tevm2.nsc.com
Deutsch Tel: (a49) 0-180-530 85 85
English Tel: (a49) 0-180-532 78 32
Fran3ais Tel: (a49) 0-180-532 93 58
Italiano Tel: (a49) 0-180-534 16 80
National Semiconductor
Hong Kong Ltd.
13th Floor, Straight Block,
Ocean Centre, 5 Canton Rd.
Tsimshatsui, Kowloon
Hong Kong
Tel: (852) 2737-1600
Fax: (852) 2736-9960
National Semiconductor
Japan Ltd.
Tel: 81-043-299-2309
Fax: 81-043-299-2408
National does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and National reserves the right at any time without notice to change said circuitry and specifications.
Similar pages