Fairchild DM7473 Dual master-slave j-k flip-flops with clear and complementary output Datasheet

Revised February 2000
DM7473
Dual Master-Slave J-K Flip-Flops
with Clear and Complementary Outputs
General Description
This device contains two independent positive pulse triggered J-K flip-flops with complementary outputs. The J and
K data is processed by the flip-flops after a complete clock
pulse. While the clock is LOW the slave is isolated from the
master. On the positive transition of the clock, the data
from the J and K inputs is transferred to the master. While
the clock is HIGH the J and K inputs are disabled. On the
negative transition of the clock, the data from the master is
transferred to the slave. The logic states of the J and K
inputs must not be allowed to change while the clock is
HIGH. Data transfers to the outputs on the falling edge of
the clock pulse. A LOW logic level on the clear input will
reset the outputs regardless of the logic states of the other
inputs.
Ordering Code:
Order Number
DM7473N
Package Number
N14A
Package Description
14-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300 Wide
Connection Diagram
Function Table
Inputs
Outputs
CLR
CLK
J
K
Q
L
X
X
X
L
Q
H
H
L
L
Q0
Q0
H
H
L
H
L
H
L
H
L
H
H
H
H
Toggle
H = HIGH Logic Level
L = LOW Logic Level
X = Either LOW or HIGH Logic Level
= Positive pulse data. the J and K inputs must be held constant while
the clock is HIGH. Data is transferred to the outputs on the falling
edge of the clock pulse.
Q0 = The output logic level before the indicated input conditions were
established.
Toggle = Each output changes to the complement of its previous level on
each HIGH level clock pulse.
© 2000 Fairchild Semiconductor Corporation
DS006525
www.fairchildsemi.com
DM7473 Dual Master-Slave J-K Flip-Flops with Clear and Complementary Outputs
September 1986
DM7473
Absolute Maximum Ratings(Note 1)
Supply Voltage
Note 1: The “Absolute Maximum Ratings” are those values beyond which
the safety of the device cannot be guaranteed. The device should not be
operated at these limits. The parametric values defined in the Electrical
Characteristics tables are not guaranteed at the absolute maximum ratings.
The “Recommended Operating Conditions” table will define the conditions
for actual device operation.
7V
Input Voltage
5.5V
0°C to +70°C
Operating Free Air Temperature Range
−65°C to +150°C
Storage Temperature Range
Recommended Operating Conditions
Symbol
Parameter
Min
Nom
Max
Units
4.75
5
5.25
V
VCC
Supply Voltage
VIH
HIGH Level Input Voltage
VIL
LOW Level Input Voltage
0.8
V
IOH
HIGH Level Output Current
−0.4
mA
IOL
LOW Level Output Current
fCLK
Clock Frequency (Note 3)
0
tW
Pulse Width
Clock HIGH
20
(Note 3)
Clock LOW
47
Clear LOW
25
2
V
tSU
Input Setup Time (Note 2)(Note 3)
0↑
tH
Input Hold Time (Note 2)(Note 3)
0↓
TA
Free Air Operating Temperature
0
16
mA
15
MHz
ns
ns
ns
°C
70
Note 2: The symbol (↑, ↓) indicates the edge of the clock pulse is used for reference: (↑) for rising edge, (↓) for falling edge.
Note 3: TA = 25°C and V CC = 5V.
Electrical Characteristics
over recommended operating free air temperature range (unless otherwise noted)
Symbol
Parameter
Conditions
VI
Input Clamp Voltage
VCC = Min, II = −12 mA
VOH
HIGH Level
VCC = Min, IOH = Max
Output Voltage
VIL = Max, VIH = Min
VOL
LOW Level
VCC = Min, IOL = Max
Output Voltage
VIH = Min, VIL = Max
II
Input Current @ Max Input Voltage VCC = Max, VI = 5.5V
IIH
HIGH Level
VCC = Max
Input Current
VI = 2.4V
IIL
LOW Level Input
VCC = Max
Current
VI = 0.4V
IOS
Short Circuit Output Current
VCC = Max (Note 5)
ICC
Supply Current
VCC = Max, (Note 6)
Min
2.4
Typ (Note 4)
Max
Units
−1.5
V
3.4
V
0.2
J, K
0.4
V
1
mA
40
Clock
80
Clear
80
J, K
−1.6
Clock
−3.2
Clear
−3.2
−18
18
µA
mA
−55
mA
34
mA
Note 4: All typicals are at VCC = 5V, TA = 25°C.
Note 5: Not more than one output should be shorted at a time.
Note 6: With all outputs OPEN, ICC is measured with the Q and Q outputs HIGH in turn. At the time of measurement the clock input grounded.
Switching Characteristics
Symbol
at VCC = 5V and TA = 25°C
Parameter
From (Input)
RL = 400Ω, CL = 15 pF
To (Output)
Min
Units
Max
fMAX
Maximum Clock Frequency
tPHL
Propagation Delay Time HIGH-to-LOW Level Output
Clear to Q
40
ns
tPLH
Propagation Delay Time LOW-to-HIGH Level Output
Clear to Q
25
ns
tPHL
Propagation Delay Time HIGH-to-LOW Level Output
Clock to Q or Q
40
ns
tPLH
Propagation Delay Time LOW-to-HIGH Level Output
Clock to Q or Q
25
ns
www.fairchildsemi.com
15
2
MHz
DM7473 Dual Master-Slave J-K Flip-Flops with Clear and Complementary Outputs
Physical Dimensions inches (millimeters) unless otherwise noted
14-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300 Wide
Package Number N14A
Fairchild does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and
Fairchild reserves the right at any time without notice to change said circuitry and specifications.
LIFE SUPPORT POLICY
FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT
DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD
SEMICONDUCTOR CORPORATION. As used herein:
2. A critical component in any component of a life support
device or system whose failure to perform can be reasonably expected to cause the failure of the life support
device or system, or to affect its safety or effectiveness.
1. Life support devices or systems are devices or systems
which, (a) are intended for surgical implant into the
body, or (b) support or sustain life, and (c) whose failure
to perform when properly used in accordance with
instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the
user.
www.fairchildsemi.com
3
www.fairchildsemi.com
Similar pages