Fairchild DM74ALS1005N Hex inverting driver with open collector output Datasheet

Revised February 2000
DM74ALS1005
Hex Inverting Driver with Open Collector Outputs
General Description
Features
These devices contain six independent drivers, each of
which performs the logic INVERT/Complement function.
The outputs require external pull-up resistors for proper
logical operation. The DM74ALS1005 is a driver version of
the DM74ALS05A.
■ Switching specifications at 50 pF
Pull-Up Resistor Equations
■ Switching specifications guaranteed over full temperature and VCC range
■ Advanced oxide-isolated, ion-implanted Schottky TTL
process
■ Functionally and pin for pin compatible with Schottky
and low power Schottky TTL counterpart
■ Improved AC performance over Schottky and low power
Schottky counterparts
Where:
N1 (IOH) = total maximum output high current
for all outputs tied to pull-up resistor
N2 (IIH) = total maximum input high current for
all inputs tied to pull-up resistor
N3 (IIL) = total maximum input low current for
all inputs tied to pull-up resistor
Ordering Code:
Order Number
Package Number
DM74ALS1005M
M14A
14-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150 Narrow
Package Description
DM74ALS1005N
N14A
14-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300 Wide
Devices also available in Tape and Reel. Specify by appending the suffix letter “X” to the ordering code.
Connection Diagram
Function Table
Y=A
Input
Output
A
Y
H
L
L
H
L = LOW Logic Level
H = HIGH Logic Level
© 2000 Fairchild Semiconductor Corporation
DS006253
www.fairchildsemi.com
DM74ALS1005 Hex Inverting Driver with Open Collector Outputs
September 1986
DM74ALS1005
Absolute Maximum Ratings(Note 1)
Supply Voltage
7V
Input Voltage
7V
OFF-State Output Voltage
7V
Note 1: The “Absolute Maximum Ratings” are those values beyond which
the safety of the device cannot be guaranteed. The device should not be
operated at these limits. The parametric values defined in the Electrical
Characteristics tables are not guaranteed at the absolute maximum ratings.
The “Recommended Operating Conditions” table will define the conditions
for actual device operation.
0°C to +70°C
Operating Free Air Temperature Range
−65°C to +150°C
Storage Temperature Range
Typical θJA
N Package
76.0°C/W
M Package
106.5°C/W
Recommended Operating Conditions
Symbol
Parameter
Min
Nom
Max
Units
4.5
5
5.5
V
VCC
Supply Voltage
VIH
HIGH Level Input Voltage
VIL
LOW Level Input Voltage
0.8
V
VOH
HIGH Level Output Voltage
5.5
V
IOL
LOW Level Output Current
24
mA
TA
Free Air Operating Temperature
70
°C
2
V
0
Electrical Characteristics
over recommended operating free air temperature range. All typical values are measured at VCC = 5V, TA = 25°C.
Symbol
Parameter
Conditions
Min
Typ
Max
Units
VIK
Input Clamp Voltage
VCC = 4.5V, II = −18 mA
−1.5
V
IOH
HIGH Level Output Current
VCC = 4.5V, VOH = 5.5V
100
µA
VOL
LOW Level
VCC = 4.5V
Output Voltage
II
Input Current at Maximum
Input Voltage
IOL = 12 mA
0.25
0.4
V
IOL = 24 mA
0.35
0.5
V
0.1
mA
VCC = 5.5V, VIH = 7V
IIH
HIGH Level Input Current
VCC = 5.5V, VIH = 2.7V
20
µA
IIL
LOW Level Input Current
VCC = 5.5V, VIL = 0.4V
−0.1
mA
ICC
Supply Current
VCC = 5.5V
Outputs HIGH
0.9
3
mA
Outputs LOW
7
12
mA
Min
Max
Units
5
30
ns
2
10
ns
Switching Characteristics
over recommended operating free air temperature range
Symbol
tPLH
tPHL
Parameter
Conditions
Propagation Delay Time
VCC = 4.5V to 5.5V
LOW-to-HIGH Level Output
RL = 680Ω
Propagation Delay Time
CL = 50 pF
HIGH-to-LOW Level Output
www.fairchildsemi.com
2
DM74ALS1005
Physical Dimensions inches (millimeters) unless otherwise noted
14-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150 Narrow
Package Number M14A
3
www.fairchildsemi.com
DM74ALS1005 Hex Inverting Driver with Open Collector Outputs
Physical Dimensions inches (millimeters) unless otherwise noted (Continued)
14-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300 Wide
Package Number N14A
Fairchild does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and
Fairchild reserves the right at any time without notice to change said circuitry and specifications.
LIFE SUPPORT POLICY
FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT
DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD
SEMICONDUCTOR CORPORATION. As used herein:
2. A critical component in any component of a life support
device or system whose failure to perform can be reasonably expected to cause the failure of the life support
device or system, or to affect its safety or effectiveness.
1. Life support devices or systems are devices or systems
which, (a) are intended for surgical implant into the
body, or (b) support or sustain life, and (c) whose failure
to perform when properly used in accordance with
instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the
user.
www.fairchildsemi.com
www.fairchildsemi.com
4
Similar pages