Fairchild DM74ALS162BM Synchronous four-bit counter Datasheet

Revised February 2000
DM74ALS161B • DM74ALS162B • DM74ALS163B
Synchronous Four-Bit Counter
General Description
These synchronous presettable counters feature an internal carry look ahead for application in high speed counting
designs. The DM74ALS162B is a four-bit decade counter,
while the DM74ALS161B and DM74ALS163B are four-bit
binary counters. The DM74ALS161B clears asynchronously, while the DM74ALS162B and DM74ALS163B clear
synchronously. The carry output is decoded to prevent
spikes during normal counting mode of operation. Synchronous operation is provided by having all flip-flops clocked
simultaneously so that outputs change coincident with
each other when so instructed by count enable inputs and
internal gating. This mode of operation eliminates the output counting spikes which are normally associated with
asynchronous (ripple clock) counters. A buffered clock
input triggers the four flip-flops on the rising (positivegoing) edge of the clock input waveform.
These counters are fully programmable, that is, the outputs
may be preset to either level. As presetting is synchronous,
setting up a low level at the load input disables the counter
and causes the outputs to agree with set up data after the
next clock pulse regardless of the levels of enable input.
LOW-to-HIGH transitions at the load input are perfectly
acceptable regardless of the logic levels on the clock or
enable inputs.
The DM74ALS161B clear function is asynchronous. A low
level at the clear input sets all four of the flip-flop outputs
LOW regardless of the levels of clock, load or enable
inputs. These two counters are provided with a clear on
power-up feature. The DM74ALS162B and DM74ALS163B
clear function is synchronous; and a low level at the clear
input sets all four of the flip-flop outputs LOW after the next
clock pulse, regardless of the levels of enable inputs. This
synchronous clear allows the count length to be modified
easily, as decoding the maximum count desired can be
accomplished with one external NAND gate. The gate output is connected to the clear input to synchronously clear
the counter to all low outputs. LOW-to-HIGH transitions at
the clear input of the DM74ALS162B and DM74ALS163B
are also permissible regardless of the levels of logic on the
clock, enable or load inputs.
The carry look ahead circuitry provides for cascading
counters for n bit synchronous application without additional gating. Instrumental in accomplishing this function
are two count enable inputs (P and T) and a ripple carry
output. Both count enable inputs must be HIGH to count.
The T input is fed forward to enable the ripple carry output.
The ripple carry output thus enabled will produce a high
level output pulse with a duration approximately equal to
the high level portion of QA output. This high level overflow
ripple carry pulse can be used to enable successive cascaded stages. HIGH-to-LOW level transitions at the enable
P or T inputs of the DM74ALS161B through
DM74ALS163B may occur regardless of the logic level on
the clock.
The DM74ALS161B through DM74ALS163B feature a fully
independent clock circuit. changes made to control inputs
(enable P or T, or load) that will modify the operating mode
will have no effect until clocking occurs. The function of the
counter (whether enabled, disabled, loading or counting)
will be dictated solely by the conditions meeting the stable
set-up and hold times.
Features
■ Switching specifications at 50 pF
■ Switching specifications guaranteed over full temperature and VCC range
■ Advanced oxide-isolated, ion-implanted Schottky TTL
process
■ Functionally and pin-for-pin compatible with Schottky
and low power Schottky TTL counterpart
■ Improved AC performance over Schottky and low power
Schottky counterparts
■ Synchronously programmable
■ Internal look ahead for fast counting
■ Carry output for n-bit cascading
■ Synchronous counting
■ Load control line
■ ESD inputs
Ordering Code:
Order Number
Package Number
DM74ALS161BM
M16A
16-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150 Narrow
Package Description
DM74ALS161BN
N16E
16-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300 Wide
DM74ALS162BM
M16A
16-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150 Narrow
DM74ALS162BN
N16E
16-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300 Wide
DM74ALS163BM
M16A
16-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150 Narrow
DM74ALS163BN
N16E
16-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300 Wide
Devices also available in Tape and Reel. Specify by appending the suffix letter “X” to the ordering code.
© 2000 Fairchild Semiconductor Corporation
DS006206
www.fairchildsemi.com
DM74ALS161B • DM74ALS162B • DM74ALS163B Synchronous Four-Bit Counter
April 1984
DM74ALS161B • DM74ALS162B • DM74ALS163B
Connection Diagram
Mode Select Table
Clear
L
Load Enable T Enable P
X
Clock Edge (
Reset (Clear)
L
X
X
Load (Pn → Qn)
H
H
H
H
Count (Increment)
H
H
L
X
No Change (Hold)
H
H
X
L
No Change (Hold)
Logic Diagrams
DM74ALS161B
2
X
H
H = HIGH Voltage Level
L = LOW Voltage Level
X = Immaterial
www.fairchildsemi.com
X
Action on the Rising
)
DM74ALS161B • DM74ALS162B • DM74ALS163B
Logic Diagrams
(Continued)
DM74ALS162B
DM74ALS163B
3
www.fairchildsemi.com
DM74ALS161B • DM74ALS162B • DM74ALS163B
Timing Diagrams
DM74ALS162B
www.fairchildsemi.com
4
DM74ALS161B • DM74ALS162B • DM74ALS163B
Timing Diagrams (continued)
DM74ALS161B, DM74ALS163B
5
www.fairchildsemi.com
DM74ALS161B • DM74ALS162B • DM74ALS163B
Absolute Maximum Ratings(Note 1)
Supply Voltage
7V
Input Voltage
7V
Operating Free Air Temperature Range
0°C to +70°C
Note 1: The “Absolute Maximum Ratings” are those values beyond which
the safety of the device cannot be guaranteed. The device should not be
operated at these limits. The parametric values defined in the Electrical
Characteristics tables are not guaranteed at the absolute maximum ratings.
The “Recommended Operating Conditions” table will define the conditions
for actual device operation.
−65°C to +150°C
Storage Temperature Range
Typical θJA
N Package
78.1°C/W
M Package
106.8°C/W
Recommended Operating Conditions
Symbol
Parameter
Min
Nom
Max
4.5
5
5.5
Units
VCC
Supply Voltage
VIH
HIGH Level Input Voltage
VIL
LOW Level Input Voltage
0.8
V
IOH
HIGH Level Output Current
−0.4
mA
IOL
LOW Level Output Current
fCLK
Clock Frequency
tSETUP
Setup Time
2
0
Data; A, B, C, D
En P, En T
ns
ns
tHOLD
tW
TA
Hold Time
15↑ (Note 2)
ns
15↑ (Note 2)
ns
LOW
15↑ (Note 2)
ns
HIGH
12↑ (Note 2)
Load
Clear Inactive
ns
10
4
ns
Data; A, B, C, D
0↑ (Note 2)
−3
ns
En P, En T
0↑ (Note 2)
−3
ns
Load
0↑ (Note 2)
−4
ns
Clear (Only for DM74ALS162B and
DM74ALS163B
0↑ (Note 2)
−7
ns
0
−4
ns
Hold 0 (Only for 161B)
Clear
Width of Clock
CLK HIGH or LOW
or Clear Pulse
DM74ALS161B CLR LOW
12.5
ns
15
ns
Width of Load Pulse
15
Operating Free Air Temperature
0
Note 2: The symbol (↑) indicates that the rising edge of the clock is used as a reference.
www.fairchildsemi.com
mA
MHz
15↑ (Note 2)
DM74ALS163B
Setup 1 (Only for 161B)
8
40
DM74ALS161B 15↑ (Note 2)
DM74ALS162B
Clear (Only for
DM74ALS162B and
DM74ALS163B)
V
V
6
ns
70
°C
over recommended operating free air temperature range. All typical values are measured at VCC = 5V, TA = 25°C.
Symbol
Parameter
Conditions
VIK
Input Clamp Voltage
VCC = 4.5V, II = −18 mA
VOH
HIGH Level
IOH = −0.4 mA
Output Voltage
VCC = 4.5V to 5.5V
LOW Level
VCC = 4.5V
VOL
Input Current at Max
Input Voltage
Typ
Max
Units
−1.5
V
VCC − 2
Output Voltage
II
Min
V
IOL = 4 mA
0.25
0.4
V
IOL = 8 mA
0.35
0.5
V
0.1
mA
VCC = 5.5V, VIH = 7V
IIH
HIGH Level Input Current
VCC = 5.5V, VIH = 2.7V
20
µA
IIL
LOW Level Input Current
VCC = 5.5V, VIL = 0.4V
−0.2
mA
IO
Output Drive Current
VCC = 5.5V, VO = 2.25V
ICC
Supply Current
VCC = 5.5V
−30
−112
mA
12
21
mA
Min
Max
Units
Switching Characteristics DM74ALS161B
over recommended operating free air temperature range.
Symbol
Parameter
Conditions
fMAX
Maximum Clock Frequency
VCC = 4.5V to 5.5V
tPLH
Propagation Delay Time
RL = 500Ω
LOW-to-HIGH Level Output
CL = 50 pF
tPHL
From
40
Clock
Propagation Delay Time
Clock
Propagation Delay Time
Propagation Delay Time
HIGH-to-LOW Level Output
tPLH
Propagation Delay Time
20
ns
5
20
ns
4
15
ns
Clock
Any Q
6
20
ns
En T
Ripple
3
13
ns
3
13
ns
En T
HIGH-to-LOW Level Output
tPHL
5
Any Q
Carry
Propagation Delay Time
MHz
Clock
LOW-to-HIGH Level Output
tPHL
Ripple
Carry
LOW-to-HIGH Level Output
tPHL
Ripple
Carry
HIGH-to-LOW Level Output
tPLH
To
Ripple
Carry
Propagation Delay Time
Clear
Any Q
HIGH-to-LOW Level Output
Clear
Ripple
Carry
8
24
ns
11
23
ns
Min
Max
Units
Switching Characteristics DM74ALS162B, DM74ALS163B
over recommended operating free air temperature range.
Symbol
Parameter
Conditions
fMAX
Maximum Clock Frequency
VCC = 4.5V to 5.5V
tPLH
Propagation Delay Time
RL = 500Ω
LOW-to-HIGH Level Output
CL = 50 pF
Propagation Delay Time
TA = Min to Max
tPHL
From
40
Clock
Clock
Propagation Delay Time
Propagation Delay Time
HIGH-to-LOW Level Output
tPLH
Propagation Delay Time
ns
5
20
ns
15
ns
Clock
Any Q
6
20
ns
En T
Ripple
3
13
ns
3
13
ns
Ripple
Carry
7
20
4
En T
HIGH-to-LOW Level Output
5
Any Q
Carry
Propagation Delay Time
MHz
Clock
LOW-to-HIGH Level Output
tPHL
Ripple
Carry
LOW-to-HIGH Level Output
tPHL
Ripple
Carry
HIGH-to-LOW Level Output
tPLH
To
www.fairchildsemi.com
DM74ALS161B • DM74ALS162B • DM74ALS163B
Electrical Characteristics
DM74ALS161B • DM74ALS162B • DM74ALS163B
Physical Dimensions inches (millimeters) unless otherwise noted
16-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150 Narrow
Package Number M16A
www.fairchildsemi.com
8
DM74ALS161B • DM74ALS162B • DM74ALS163B Synchronous Four-Bit Counter
Physical Dimensions inches (millimeters) unless otherwise noted (Continued)
16-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300 Wide
Package Number N16E
Fairchild does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and
Fairchild reserves the right at any time without notice to change said circuitry and specifications.
LIFE SUPPORT POLICY
FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT
DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD
SEMICONDUCTOR CORPORATION. As used herein:
2. A critical component in any component of a life support
device or system whose failure to perform can be reasonably expected to cause the failure of the life support
device or system, or to affect its safety or effectiveness.
1. Life support devices or systems are devices or systems
which, (a) are intended for surgical implant into the
body, or (b) support or sustain life, and (c) whose failure
to perform when properly used in accordance with
instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the
user.
www.fairchildsemi.com
9
www.fairchildsemi.com
Similar pages