Fairchild DM74ALS165NX 8-bit parallel in/serial out shift register Datasheet

DM74ALS165 8-Bit Parallel In/Serial Out Shift Register
January 1986
Revised February 2000
DM74ALS165
8-Bit Parallel In/Serial Out Shift Register
General Description
Features
The DM74ALS165 is an 8-bit serial register that, when
clocked, shifts the data toward serial output, QH. Parallel-in
access to each stage is provided by eight individual direct
data inputs that are enabled by a low level at the SH/LD
input. The DM74ALS165 also features a clock inhibit function and a complemented serial output, QH.
■ Complementary outputs
■ Direct overriding load (data) inputs
■ Gated clock inputs
■ Parallel-to-serial data conversion
Clocking is accomplished by a LOW-to-HIGH transition of
the CLK input while SH/LD is held HIGH and CLK INH is
held LOW. The functions of the CLK and CLK INH (clock
inhibit) inputs are interchangeable. Since a LOW CLK input
and a LOW-to-HIGH transition of CLK INH will also accomplish clocking, CLK INH should be changed to the high
level only while the CLK input is HIGH. Parallel loading is
inhibited when SH/LD is held HIGH. The parallel inputs to
the register are enabled while SH/LD is LOW independently of the levels of CLK, CLK INH, or SER inputs.
Ordering Code:
Order Number
Package Number
Package Description
DM74ALS165M
M16A
16-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150 Narrow
DM74ALS165N
N16E
16-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300 Wide
Devices also available in Tape and Reel. Specify by appending the suffix letter “X” to the ordering code.
Connection Diagram
Function Table
Inputs
Internal
Shift/ Clock Clock Serial Parallel
Outputs
Load Inhibit
A...H
QA
QB
Output
QH
L
X
X
X
a...h
a
b
h
H
L
L
X
X
QA0
QB0
QH0
H
L
↑
H
X
H
QAn
QGn
H
L
↑
L
X
L
QAn
QGn
H
↑
L
H
X
H
QAn
QGn
H
↑
L
L
X
L
QAn
QGn
H
H
X
X
X
QA0
QB0
QH0
H = HIGH Level (steady-state),
L = LOW Level (steady-state)
X = Don't Care (any input, including transitions)
↑ = Transition from LOW-to-HIGH level
a...h = The level of steady-state input at inputs A through H, respectively
QA0, QB0, QH0 = The level of QA, QB, or QH, respectively, before the
indicated steady-state input conditions were established
QAn, QGn = The level of QA or QG, respectively, before the most recent
↑ transition of the clock
© 2000 Fairchild Semiconductor Corporation
DS006712
www.fairchildsemi.com
DM74ALS165
Logic Diagram
Timing Diagram
Typical Shift, Load, and Inhibit Sequences
www.fairchildsemi.com
2
Supply Voltage
7V
Input Voltage
7V
0°C to +70°C
Operating Free Air Temperature Range
Note 1: The “Absolute Maximum Ratings” are those values beyond which
the safety of the device cannot be guaranteed. The device should not be
operated at these limits. The parametric values defined in the Electrical
Characteristics tables are not guaranteed at the absolute maximum ratings.
The “Recommended Operating Conditions” table will define the conditions
for actual device operation.
−65°C to +150°C
Storage Temperature Range
Typical θJA
N Package
74.0°C/W
M Package
104.0°C/W
Recommended Operating Conditions
Symbol
Parameter
Min
Typ
Max
Units
4.5
5
5.5
V
LOW Level Input Voltage
0.8
V
IOH
HIGH Level Output Current
−0.4
mA
IOL
LOW Level Output Current
8
mA
fCLOCK
Clock Frequency
tW
Pulse Duration
VCC
Supply Voltage
VIH
HIGH Level Input Voltage
VIL
tSU
tSU
Setup Time
Setup Time
2
V
45
CLK HIGH
MHz
11
CLK LOW
11
Load
12
SH/LD
10
Data
10
CLK INH ↓ before CLK
11
Serial before CLK
10
tH
Hold Time
4
TA
Operating Free Air Temperature
0
ns
ns
ns
ns
°C
70
Electrical Characteristics
over recommended operating free air temperature range (unless otherwise noted)
Symbol
Parameter
Conditions
VIK
Input Clamp Voltage
VCC = 4.5V, II = −18 mA
VOH
HIGH Level
IOH = −0.4 mA
Output Voltage
VCC = 4.5V to 5.5V
LOW Level
VCC = 4.5V
VOL
Min
Typ
(Note 2)
Max
Units
−1.5
V
VCC − 2
Output Voltage
V
IOL = 4 mA
0.25
0.4
IOL = 8 mA
0.35
0.5
V
II
Input Current at Max Input Voltage VCC = 5.5V, VI = 7V
IIH
HIGH Level Input Current
VCC = 5.5V, VI = 2.7V
20
µA
IIL
LOW Level Input Current
VCC = 5.5V, VI = 0.4V
−0.1
mA
IO (Note 3)
Output Drive Current
VCC = 5.5V, VO = 2.25V
ICC
Supply Current
VCC = 5.5V (Note 4)
0.1
−30
16
mA
−112
mA
24
mA
Note 2: All typical values are at VCC = 5V, TA = 25°C.
Note 3: The output conditions have been chosen to produce a current that closely approximates one half of the true short-circuit output current, IOS.
Note 4: With the outputs open, CLK INH and CLK at 4.5V, and a clock pulse applied to the SH/LD input, ICC is measured first with the parallel inputs at 4.5V,
then with the parallel inputs grounded.
3
www.fairchildsemi.com
DM74ALS165
Absolute Maximum Ratings(Note 1)
DM74ALS165
Switching Characteristics
over recommended free air temperature range. All typical values are measured at VCC = 5V, TA = 25°C.
Symbol
Parameter
Input
Output
Conditions
fMAX
Maximum Frequency
VCC = 4.5V to 5.5V,
tPLH
Propagation Delay Time
CL = 50 pF,
LOW-to-HIGH Level Output
tPHL
Propagation Delay Time
HIGH-to-LOW Level Output
tPLH
Propagation Delay Time
LOW-to-HIGH Level Output
tPHL
Propagation Delay Time
HIGH-to-LOW Level Output
tPLH
Propagation Delay Time
LOW-to-HIGH Level Output
tPHL
Propagation Delay Time
HIGH-to-LOW Level Output
tPLH
Propagation Delay Time
LOW-to-HIGH Level Output
tPHL
Propagation Delay Time
HIGH-to-LOW Level Output
www.fairchildsemi.com
Min
Typ
45
60
Max
4
13
20
4
14
22
MHz
Load
QH or QH
Load
QH or QH
CLK
QH or QH
3
7
13
CLK
QH or QH
3
9
14
H
QH
3
7
13
H
QH
3
9
16
H
QH
2
8
15
H
QH
3
9
16
RL = 500Ω
TA = Min to Max
Units
ns
ns
ns
ns
4
DM74ALS165
Physical Dimensions inches (millimeters) unless otherwise noted
16-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150 Narrow
Package Number M16A
5
www.fairchildsemi.com
DM74ALS165 8-Bit Parallel In/Serial Out Shift Register
Physical Dimensions inches (millimeters) unless otherwise noted (Continued)
16-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300 Wide
Package Number N16E
Fairchild does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and
Fairchild reserves the right at any time without notice to change said circuitry and specifications.
LIFE SUPPORT POLICY
FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT
DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD
SEMICONDUCTOR CORPORATION. As used herein:
2. A critical component in any component of a life support
device or system whose failure to perform can be reasonably expected to cause the failure of the life support
device or system, or to affect its safety or effectiveness.
1. Life support devices or systems are devices or systems
which, (a) are intended for surgical implant into the
body, or (b) support or sustain life, and (c) whose failure
to perform when properly used in accordance with
instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the
user.
www.fairchildsemi.com
www.fairchildsemi.com
6
Similar pages