Fairchild DM74ALS541WM Octal buffer and line driver with 3-state output Datasheet

Revised February 2000
DM74ALS541
Octal Buffer and Line Driver with 3-STATE Outputs
General Description
Features
This octal buffer and line driver is designed to have the performance of the DM74ALS240A series and, at the same
time, offer a pinout with inputs and outputs on opposite
sides of the package. This arrangement greatly enhances
circuit board layout. The 3-STATE control gate is a 2-input
NOR such that if either G1 or G2 is HIGH, all eight outputs
are in the high impedance state.
■ Advanced oxide-isolated ion-implanted Schottky TTL
process
■ Switching performance is guaranteed over full temperature and VCC supply range
■ Data flow-thru pinout (all inputs on opposite side from
outputs)
■ P-N-P Inputs reduce DC loading
Ordering Code:
Order Number
Package Number Package Description
DM74ALS541WM
M20B
20-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-013, 0.300 Wide
DM74ALS541SJ
M20D
20-Lead Small Outline Package (SOP), EIAJ TYPE II, 5.3mm Wide
DM74ALS541N
N20A
20-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300 Wide
Devices also available in Tape and Reel. Specify by appending the suffix letter “X” to the ordering code.
Connection Diagram
Function Table
Input
Output
G1
G2
A
Y
H
X
X
Hi-Z
X
H
X
Hi-Z
L
L
L
L
L
L
H
H
H = HIGH Logic Level
L = LOW Logic Level
X = Don't Care (Either LOW or HIGH Logic Level)
Hi-Z = High Impedance (OFF) State
© 2000 Fairchild Semiconductor Corporation
DS009171
www.fairchildsemi.com
DM74ALS541 Octal Buffer and Line Driver with 3-STATE Outputs
October 1986
DM74ALS541
Absolute Maximum Ratings(Note 1)
Supply Voltage
7V
Input Voltage: Control Inputs
7V
Voltage Applied to a Disabled
3-STATE Output
5.5V
Note 1: The “Absolute Maximum Ratings” are those values beyond which
the safety of the device cannot be guaranteed. The device should not be
operated at these limits. The parametric values defined in the Electrical
Characteristics tables are not guaranteed at the absolute maximum ratings.
The “Recommended Operating Conditions” table will define the conditions
for actual device operation.
0°C to +70°C
Operating Free-Air Temperature Range
−65°C to +150°C
Storage Temperature Range
Typical θJA
N Package
58.5°C/W
M Package
77.5°C/W
Recommended Operating Conditions
Symbol
Parameter
Min
Nom
Max
Units
4.5
5
5.5
V
VCC
Supply Voltage
VIH
HIGH Level Input Voltage
VIL
LOW Level Input Voltage
0.8
V
IOH
HIGH Level Output Current
−15
mA
IOL
LOW Level Output Current
24
mA
TA
Free Air Operating Temperature
70
°C
2
V
0
Electrical Characteristics
over recommended free air temperature range
Symbol
Parameter
Test Conditions
VIK
Input Clamp Voltage
VCC = Min, II = −18 mA
VOH
HIGH Level
VCC = 4.5V to 5.5V
Output Voltage
VCC = Min
Min
IOH = −0.4 mA
IOH = −3 mA
IOH = Max
VOL
LOW Level
VCC = Min
Output Voltage
II
Input Current at Maximum
Input Voltage
Typ
Max
Units
−1.2
V
VCC − 2
2.4
3.2
V
2
IOL = 12 mA
0.25
0.4
IOL = 24 mA
0.35
0.5
VCC = Max, VI = 7V
mA
100
µA
IIH
HIGH Level Input Current
VCC = Max, VI = 2.7V
20
µA
IIL
LOW Level Input Current
VCC = Max, VI = 0.4V
−100
µA
IOZH
HIGH Level 3-STATE
VCC = Max, VO = 2.7V
20
µA
VCC = Max, VO = 0.4V
−20
µA
−112
mA
Output Current
IOZL
LOW Level 3-STATE
Output Current
IO
Output Drive Current
VCC = Max, VO = 2.25V
ICC
Supply Current
VCC = Max
−30
Outputs HIGH
Outputs LOW
Outputs Disabled
www.fairchildsemi.com
2
6
14
15
25
13.5
22
mA
over recommended operating free air temperature range
Symbol
tPLH
tPHL
Parameter
Conditions
Propagation Delay Time
VCC = 4.5V to 5.5V,
LOW-to-HIGH Level Output
R1 = R2 = 500Ω,
Propagation Delay Time
CL = 50 pF
HIGH-to-LOW Level Output
tPZH
Output Enable Time
to HIGH Level Output
tPZL
Output Enable Time
to LOW Level Output
tPHZ
Output Disable Time
from HIGH Level Output
tPLZ
Output Disable Time
from LOW Level Output
3
From (Input)
Min
Max
Units
A to Y
4
14
ns
A to Y
2
10
ns
G to Y
5
15
ns
G to Y
8
20
ns
G to Y
1
10
ns
G to Y
2
12
ns
To (Output)
www.fairchildsemi.com
DM74ALS541
Switching Characteristics
DM74ALS541
Physical Dimensions inches (millimeters) unless otherwise noted
20-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-013, 0.300 Wide
Package Number M20B
www.fairchildsemi.com
4
DM74ALS541
Physical Dimensions inches (millimeters) unless otherwise noted (Continued)
20-Lead Small Outline Package (SOP), EIAJ TYPE II, 5.3mm Wide
Package Number M20D
5
www.fairchildsemi.com
DM74ALS541 Octal Buffer and Line Driver with 3-STATE Outputs
Physical Dimensions inches (millimeters) unless otherwise noted (Continued)
20-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300 Wide
Package Number N20A
Fairchild does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and
Fairchild reserves the right at any time without notice to change said circuitry and specifications.
LIFE SUPPORT POLICY
FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT
DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD
SEMICONDUCTOR CORPORATION. As used herein:
2. A critical component in any component of a life support
device or system whose failure to perform can be reasonably expected to cause the failure of the life support
device or system, or to affect its safety or effectiveness.
1. Life support devices or systems are devices or systems
which, (a) are intended for surgical implant into the
body, or (b) support or sustain life, and (c) whose failure
to perform when properly used in accordance with
instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the
user.
www.fairchildsemi.com
www.fairchildsemi.com
6
Similar pages