DN100 NPN Silicon Transistor PIN Connection C E B B • Extremely low collector-to-emitter saturation voltage ( VCE(SAT)= 0.15V Typ. @IC/IB=400mA/20mA) • Suitable for low voltage large current drivers • Complementary pair with DP100 • Switching Application C Features E TO-92 Ordering Information Type NO. DN100 Marking Package Code DN100 TO-92 Absolute maximum ratings (Ta=25°C) Characteristic Symbol Ratings Unit Collector-Base voltage VCBO 15 V Collector-Emitter voltage VCEO 12 V Emitter-Base voltage VEBO 5 V Collector current IC 1 A Collector dissipation PC 625 mW Junction temperature Tj 150 °C Storage temperature Tstg -55~150 °C Electrical Characteristics Characteristic (Ta=25°C) Symbol Test Condition Min. Typ. Max. Unit Collector-Base breakdown voltage BVCBO IC=50μA, IE=0 15 - - V Collector-Emitter breakdown voltage BVCEO IC=1mA, IB=0 12 - - V Emitter-Base breakdown voltage BVEBO IE=50μA, IC=0 5 - - V Collector cut-off current ICBO VCB=12V, IE=0 - - 0.1 μA Emitter cut-off current IEBO VEB=5V, IC=0 - - 0.1 μA hFE1 VCE=1V, IC=100mA 200 - 450 - hFE2 VCE=1V, IC=1A 70 - - - DC current gain Collector-Emitter saturation voltage VCE(sat) IC=400mA, IB=20mA - - 0.25 V Base-Emitter saturation voltage VBE(sat) IC=400mA, IB=20mA - - 1.2 V VCE=5V, IC=50mA - 260 - MHz VCB=10V, IE=0, f=1MHz - 5 - pF Transition frequency Collector output capacitance fT Cob KSD-T0A037-000 1 DN100 Electrical Characteristic Curves Fig. 2 IC - VBE Fig. 1 PC - Ta Fig. 3 hFE-IC Fig. 4 VCE(sat)-IC KSD-T0A037-000 2 DN100 Outline Dimension KSD-T0A037-000 3 DN100 The AUK Corp. products are intended for the use as components in general electronic equipment (Office and communication equipment, measuring equipment, home appliance, etc.). Please make sure that you consult with us before you use these AUK Corp. products in equipments which require high quality and / or reliability, and in equipments which could have major impact to the welfare of human life(atomic energy control, airplane, spaceship, transportation, combustion control, all types of safety device, etc.). AUK Corp. cannot accept liability to any damage which may occur in case these AUK Corp. products were used in the mentioned equipments without prior consultation with AUK Corp.. Specifications mentioned in this publication are subject to change without notice. KSD-T0A037-000 4