Coilcraft DO3316H-102MLD Smt power inductors - do3316h sery Datasheet

Document 196-1
SMT Power Inductors - DO3316H Series
• Soldered self-leaded construction for excellent solderability.
• Very low DCR values and excellent current handling
Designer’s Kit C326 contains 3 of each part
Core material Ferrite
Core and winding loss See www.coilcraft.com/coreloss
Terminations RoHS compliant tin-silver-copper over copper. Other
terminations available at additional cost.
Weight 0.95 – 1.25 g
Ambient temperature –40°C to +85°C with Irms current, +85°C to
+125°C with derated current
Storage temperature Component: –40°C to +125°C.
Tape and reel packaging: –40°C to +80°C
Resistance to soldering heat Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C /
85% relative humidity)
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332
Packaging 750 per 13″ reel Plastic tape: 24 mm wide,
0.35 mm thick, 12 mm pocket spacing, 6.4 mm pocket depth
PCB washing Tested to MIL-STD-202 Method 215 plus an additional
aqueous wash. See Doc787_PCB_Washing.pdf.
DCR
SRF4
L2
%
max
typ
Isat5 Irms6
Part number1
(µH)
tol3 (Ohms) (MHz) (A) (A)
DO3316H-121ML_ 0.12 20
0.0015 200 28
17
DO3316H-331ML_ 0.33 20
0.002
200 20
16
DO3316H-681ML_ 0.68 20
0.005
200 13
12
DO3316H-102ML_ 1.0
20
0.006
100 11
10
DO3316H-152ML_ 1.5
20
0.008
90
9.0 9.0
DO3316H-222_L_ 2.2
20,10 0.011
80
7.8 7.4
DO3316H-272_L_ 2.7
20,10 0.012
65
7.0 6.6
DO3316H-332_L_ 3.3
20,10 0.014
60
6.4 5.9
DO3316H-392_L_ 3.9
20,10 0.015
50
5.9 5.3
DO3316H-472_L_ 4.7
20,10 0.018
45
5.4 4.8
1. When ordering, specify tolerance, termination and packaging codes:
DO3316H-472MLD
Tolerance: M = 20%, K = 10% (Table shows stock tolerances in bold.)
Termination: L = RoHS compliant tin-silver-copper over copper.
Special order: S = non-RoHS tin-lead (63/37).
Packaging: D = 13″ machine-ready reel. EIA-481 embossed plastic
tape (750 parts per full reel).
B = Less than full reel. In tape, but not machine ready.
To have a leader and trailer added ($25 charge), use
code letter C instead.
2. Inductance tested at 100 kHz, 0.1 Vrms, 0 Adc using an Agilent/HP
4263B LCR meter or equivalent.
3. Tolerances in bold are stocked for immediate shipment.
4. SRF measured using Agilent/HP 8753D network analyzer.
5. DC current at which the inductance drops 10% (typ) from its value without current.
6. Current that causes a 40°C temperature rise from 25°C ambient.
7. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
Document 196-1
Revised 09/25/12
Document 196-2
SMT Power Inductors - DO3316H Series
Typical L vs Frequency
Typical L vs Current
100
Inductance (µH)
Inductance (µH)
100
10
3.3 µH
1.5 µH
1
10
3.3 µH
1.5 µH
1
0.33 µH
0.33 µH
0.1
0.01
1
0.1
10
0.1
0.01
Frequency (MHz)
1
0.1
10
Current (A)
Irms Derating
0.390 max
9,91
120
110
0.330
8,38
90
80
0.250 max
6,35
70
60
0.460 max
11,68
0.360
min
9.14
50
40
25°C
Percent of rated Irms
100
30
20
Recommended
Land Pattern
0.060
1,52
0.160
4,06
0.150 typ
3,81
10
0
-40
-20
0
20
40
60
80
Ambient temperature (°C)
100
120 140
0.400
10,16
0.120
3,05
0.520 max
13,21
Internal code
Dash number
XXX
X
inches since Feb. 2005. Parts manufactured
Part marking
Dimensions are in prior to that date may have color dots.
mm
Visit www.coilcraft.com/colrpowr.cfm
for color dot marking details.
Document 196-2
Revised 09/25/12
Similar pages