Coilcraft DO3316P-102ML High energy storage and very low resistance, most values available with 10% tolerance Datasheet

Document 179-1
SMT Power Inductors–DO3316P Series
• High energy storage and very low resistance
• Most values available with 10% tolerance
• High inductance values are perfect for EL driver applications.
Designer’s Kit C378 contains 3 of each 20% part
Core material Ferrite
Core and winding loss See www.coilcraft.com/coreloss
Terminations RoHS compliant gold over nickel over phos bronze.
Other terminations available at additional cost.
Weight 0.92 – 1.23 g
Ambient temperature –40°C to +85°C with Irms current, +85°C to
+125°C with derated current
Storage temperature Component: –40°C to +125°C.
Tape and reel packaging: –40°C to +80°C
Resistance to soldering heat Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C /
85% relative humidity)
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332
Packaging 1000 per 13″ reel Plastic tape: 24 mm wide,
0.33 mm thick, 12 mm pocket spacing, 5.8 mm pocket depth
PCB washing Only pure water or alcohol recommended
DCR
SRF
Part
L2 Percent max
typ4 Isat5 Irms6
number1
(µH)
tol3 (Ohms) (MHz) (A) (A)
DO3316P-102ML_ 1.0
DO3316P-152ML_ 1.5
DO3316P-222_L_
2.2
DO3316P-332_L_
3.3
DO3316P-472_L_
4.7
DO3316P-682_L_
6.8
DO3316P-103_L_ 10
DO3316P-153_L_ 15
DO3316P-223_L_ 22
DO3316P-333_L_ 33
DO3316P-473_L_ 47
DO3316P-683_L_ 68
DO3316P-104_L_ 100
DO3316P-154_L_ 150
DO3316P-224_L_ 220
DO3316P-334_L_ 330
DO3316P-474_L_ 470
DO3316P-684_L_ 680
DO3316P-105_L_ 1000
DO3316P-155_L_ 1500
DO3316P-335_L_ 3300
20
20
20,10
20,10
20,10
20,10
20,10
20,10
20,10
20,10
20,10
20,10
20,10
20,10
20,10
20,10
20,10
20,10
20,10
20,10
20,10
0.009
0.010
0.012
0.015
0.018
0.027
0.038
0.046
0.085
0.10
0.14
0.20
0.28
0.40
0.61
1.02
1.27
2.02
3.00
4.49
8.97
100
90
80
65
45
38
30
27
19
15
12
10
9
6
5
4.5
3.5
2.5
2.0
1.7
1.1
9.0
8.0
7.0
6.4
5.4
4.6
3.8
3.0
2.3
2.0
1.6
1.4
1.2
1.0
0.80
0.60
0.50
0.40
0.30
0.29
0.19
6.8
6.4
6.1
5.4
4.8
4.4
3.9
3.1
2.7
2.1
1.8
1.5
1.3
1.0
0.80
0.60
0.50
0.40
0.30
0.27
0.17
1. When ordering, specify tolerance, termination and packaging codes:
DO3316P-105MLD
Tolerance:
M = 20%, K = 10% (Table shows stock tolerances in bold.)
Termination: L = RoHS compliant gold over nickel over phos bronze.
Special order: T = RoHS tin-silver-copper (95.5/4/0.5)
or S = non-RoHS tin-lead (63/37).
Packaging: D = 13″ machine-ready reel. EIA-481 embossed plastic
tape (1000 parts per full reel).
B = Less than full reel. In tape, but not machine ready.
To have a leader and trailer added ($25 charge),
use code letter D instead.
2. Tested at 100 kHz, 0.1 Vrms, 0 Adc using an Agilent/HP 4263B LCR
meter or equivalent.
3. Tolerances in bold are stocked for immediate shipment.
4. SRF >13 MHz measured using Agilent/HP 8753D network analyzer;
<13 MHz using Agilent/HP 4192A.
5. DC current at which inductance drops 10% (typ) from its value without
current.
6. Current that causes a 40°C temperature rise from 25°C ambient.
7. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
US +1-847-639-6400 [email protected]
UK +44-1236-730595 [email protected]
Taiwan +886-2-2264 3646 [email protected]
China +86-21-6218 8074 [email protected]
Singapore + 65-6484 8412 [email protected]
Document 179-1
Revised 09/25/12
© Coilcraft Inc. 2012
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check out web site for latest information.
Document 179-2
SMT Power Inductors – DO3316P Series
Typical L vs Current
Typical L vs Frequency
10000
10000
1000 µH
100 µH
100
10 µH
10
1 µH
1
1000 µH
1000
Inductance (µH)
Inductance (µH)
1000
100 µH
100
10 µH
10
1 µH
1
0.1
0.1
0.01
1
0.1
10
Frequency (MHz)
0.1
Current Derating
Current (A)
100
10
an additional 0.01/0,254
* inAllow
length and 0.005/0,127 in
0.510
max*
12,95
120
110
0.125 ±0.010
3,18 ±0,254
height for optional tin-lead and
tin-silver-copper application.
0.370max
9,40
100
90
0.145 ±0.010
3,69 ±0,254
80
70
0.330
8,38 dia
60
50
0.205 max
*
5,21
40
30
20
10
0
25°C
Percent of rated current
1
Isat
Irms
-40
-20
0
20
Recommended
Land Pattern
0.100
2,54
40
60
80
100
0.115
2,92
0.110
2,79
120 140
Ambient temperature (°C)
0.100
2,54
0.405
10,29
0.300
7,62
Internal code
XXX
X
Start
Dash number
Finish
Part marking since Feb. 2005. Parts manufactured
prior to that date may have color dots.
Visit www.coilcraft.com/colrpowr.cfm
for color dot marking details.
Dimensions are in
inches
mm
US +1-847-639-6400 [email protected]
UK +44-1236-730595 [email protected]
Taiwan +886-2-2264 3646 [email protected]
China +86-21-6218 8074 [email protected]
Singapore + 65-6484 8412 [email protected]
Document 179-2
Revised 09/25/12
© Coilcraft Inc. 2012
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check out web site for latest information.
Similar pages