Crydom DP4R60D20 Control relay Datasheet

DP Series
• DC Reversing Solid State Contactor
• Ratings of 20, 40 & 60 Amps
• Load voltage ratings of 1-48VDC
• Optional Soft Start w/Brake, Soft Start/Soft Stop no Brake
• LED input status indicator. Green (Forward), Yellow (Reverse)
• DC control
• cULus Recognized, IEC Rated, CE & RoHS Compliant
PRODUCT SELECTION
Description
4-15 VDC
18-32VDC
20 A
40 A
60 A
DP4R60D20
DP4R60E20
DP4R60D40
DP4R60E40
DP4R60D60
DP4R60E60
AVAILABLE OPTIONS
OUTPUT SPECIFICATIONS (1)
Description
Operating Voltage [VDC]
UL 508 Resistive Load, IEC 60947-4-1 DC-1 [Adc]
UL 508 Motor Controller, IEC 60947-4-1 DC-3 [FLA]
Minimum Load Current [A]
Maximum Surge Current (10ms) [Adc]
Maximum Off-State Leakage Current @ Rated Voltage [µA]
Maximum On-State Voltage Drop @ Rated Current [Vdc]
Combined Thermal Resistance Junction to Case (Rjc) [°C/W]
Maximum On-State Resistance, per switch, (RDS-ON) [Ohms]
Total Power Dissipation per module, 2 switches conducting, Tj=100° C [Watts]
Internal PWM For Soft Start/Stop Versions [Duty Cycle 10-100%] [Hz]
Output Terminal Screw size
Screw Torque Range [in lbs/Nm]
Maximum Wire Size
Weight (typical)
20 A
40 A
60 A
1-48
20
13
0.10
80
20
0.28
0.40
0.014
20
200
10-32 Combo Head
15-20 / 1.7-2.3
10 AWG
10.9 oz (310g)
1-48
40
14
0.10
140
20
0.28
0.20
0.007
40
200
1/4-20 Hex
20-25 / 2.3-2.8
8 AWG
12.2 oz (345g)
1-48
60
15
0.10
240
20
0.30
0.13
0.005
60
200
1/4-20 Hex
20-25 / 2.3-2.8
6 AWG
12.2 oz (345g)
INPUT SPECIFICATIONS (1)
Description
Logic Supply Voltage Range [VDC]
Minimum Logic Supply Current [mA] (2)
Maximum Logic Supply Current [mA] (2)
Control Voltage Range [VDC]
Minimum Control Input Current @ Min voltage [mA]
Maximum Control Input Current @ Max voltage [mA]
Typical Interlocking Time [msec]
Mating Connector (Not Supplied)
DR4R60Dxx
DR4R60Exx
4.5-15
16
20
4.5-15
0.20
1.0
200
Molex 50579404 or Equivalent
18-32
20
25
18-32
1.0
2.0
200
Molex 50579404 or Equivalent
GENERAL SPECIFICATIONS
Description
Dielectric Strength, Input/Output/Base (50/60Hz)
Minimum Insulation Resistance (@ 500 VDC)
Maximum Capacitance, Input to Output (pF)
Ambient Operating Temperature Range
Ambient Storage Temperature Range
Housing Material
Encapsulation
GENERAL NOTES
1) All parameters at 25°C unless otherwise specified.
2) Input circuit incorporates active current limiter
WIRING DIAGRAM
Parameters
2500 Vrms
109 Ohm
10 pF
-30 to 80°C
-40 to 125°C
Valox 420 SEO Black, UL 94 V-0
Thermally conductive Epoxy
MECHANICAL SPECIFICATIONS
THERMAL DERATE INFORMATION
AGENCY APPROVALS
IEC 60068-2-6 Vibration – Compliant [1.55mm/ 10-55Hz]
IEC 60068-2-27 Shock – Compliant [15G/11ms]
IEC 61000-4-2 : Electrostatic Discharge – Level 2
IEC 61000-4-4 : Electrically Fast Transients – Level 2 (Criteria A)
IEC 61000-4-5 : Electrical Surges - Level 2 (Criteria A)
Rev 081312
ACCESSORIES
OPERATING MODES
ANNEX - ENVIROMENTAL INFORMATION
Similar pages