MAXIM DS33R41

DS33R41
Inverse-Multiplexing Ethernet Mapper with
Quad Integrated T1/E1/J1 Transceivers
www.maxim-ic.com
GENERAL DESCRIPTION
FEATURES
10/100 IEEE 802.3 Ethernet MAC (MII and
RMII) Half/Full Duplex with Automatic Flow
Control
The DS33R41 extends a 10/100 Ethernet LAN
segment by encapsulating MAC frames in HDLC or
X.86 (LAPS) for transmission over four interleaved
T1/E1/J1 lines using a robust, balanced, and
programmable inverse multiplexing. Four integrated
T1/E1/J1 transceivers provide framing and line
interfacing functionality.
Layer 1 Inverse Multiplexing Over Four
T1/E1/J1 Lines Through the Integrated
Framers and LIUs
Supports Up to 7.75ms Differential Delay
The device performs store-and-forward of packets
with full wire-speed transport capability. The built-in
committed information rate (CIR) controller provides
fractional bandwidth allocation up to the line rate in
increments of 512kbps.
Aggregate Bandwidth from Up to Four
T1/E1/J1 Links
T1/E1 Signaling Capability for OAM
HDLC/LAPS Encapsulation with
Programmable FCS, Interframe Fill
CIR Controller Provides Fractional
Allocations in 512kbps Increments
FUNCTIONAL DIAGRAM
Programmable BERTs
External 16MB, 100MHz SDRAM Buffering
DS33R41
4 INTERLEAVED
SERIAL STREAMS
4 T1/E1/J1
TRANSCEIVERS
WITH BERTs
Parallel Microprocessor Interface
T1/E1
LINES
1.8V, 3.3V Power Supplies
IEEE 1149.1 JTAG Support
Features continued on page 12.
HDLC/X.86
ETHERNET
MAPPER
APPLICATIONS
µC
Bonded Transparent LAN Service
LAN Extension
Ethernet Delivery Over T1/E1/J1
SDRAM
MII/RMII
10/100
MAC
10/100
ETHERNET
PHY
ORDERING INFORMATION
PART
TEMP RANGE
PIN-PACKAGE
DS33R41
-40°C to +85°C
400 BGA
Note: Some revisions of this device may incorporate deviations from published specifications known as errata. Multiple revisions of any device
may be simultaneously available through various sales channels. For information about device errata, click here: www.maxim-ic.com/errata.
1 of 333
REV: 102105
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
DOCUMENT REVISION HISTORY
REVISION
102105
DESCRIPTION
New product release.
2 of 333
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
TABLE OF CONTENTS
1
DESCRIPTION ............................................................................................................................... 10
2
FEATURE HIGHLIGHTS................................................................................................................ 12
2.1 GENERAL .................................................................................................................................... 12
2.2 MICROPROCESSOR INTERFACE.................................................................................................... 12
2.3 LINK AGGREGATION (INVERSE MULTIPLEXING) ............................................................................. 12
2.4 HDLC ETHERNET MAPPING ........................................................................................................ 12
2.5 X.86 (LINK ACCESS PROTOCOL FOR SONET/SDH) ETHERNET MAPPING..................................... 12
2.6 ADDITIONAL HDLC CONTROLLERS IN THE INTEGRATED T1/E1/J1 TRANSCEIVER .......................... 13
2.7 COMMITTED INFORMATION RATE (CIR) CONTROLLERS ................................................................ 13
2.8 SDRAM INTERFACE.................................................................................................................... 13
2.9 T1/E1/J1 FRAMER ...................................................................................................................... 13
2.10 LINE INTERFACE .......................................................................................................................... 14
2.11 MAC INTERFACE......................................................................................................................... 14
2.12 CLOCK SYNTHESIZER .................................................................................................................. 14
2.13 JITTER ATTENUATOR ................................................................................................................... 14
2.14 SYSTEM INTERFACE .................................................................................................................... 15
2.15 TEST AND DIAGNOSTICS .............................................................................................................. 15
2.16 SPECIFICATIONS COMPLIANCE ..................................................................................................... 15
3
APPLICATIONS ............................................................................................................................. 16
4
ACRONYMS & GLOSSARY .......................................................................................................... 17
5
MAJOR OPERATING MODES ...................................................................................................... 18
6
BLOCK DIAGRAMS....................................................................................................................... 19
6.1 FRAMER/LIU INTERIM SIGNALS .................................................................................................... 21
7
PIN DESCRIPTIONS ...................................................................................................................... 22
7.1 PIN FUNCTIONAL DESCRIPTION.................................................................................................... 22
8
FUNCTIONAL DESCRIPTION ....................................................................................................... 34
8.1
PROCESSOR INTERFACE ............................................................................................................. 35
8.1.1
8.1.2
8.1.3
9
Read-Write / Data Strobe Modes........................................................................................................36
Clear on Read .....................................................................................................................................36
Interrupt and Pin Modes......................................................................................................................36
ETHERNET MAPPER .................................................................................................................... 37
9.1
ETHERNET MAPPER CLOCKS ....................................................................................................... 37
9.1.1
9.1.2
9.2
9.3
9.4
9.5
9.6
9.7
9.8
Serial Interface Clock Modes ..............................................................................................................39
Ethernet Interface Clock Modes..........................................................................................................39
RESETS AND LOW-POWER MODES .............................................................................................. 40
INITIALIZATION AND CONFIGURATION............................................................................................ 41
GLOBAL RESOURCES .................................................................................................................. 42
PER-PORT RESOURCES .............................................................................................................. 42
DEVICE INTERRUPTS ................................................................................................................... 42
SERIAL INTERFACE ...................................................................................................................... 44
LINK AGGREGATION (IMUX) ........................................................................................................ 44
9.8.1
9.8.2
9.8.3
9.8.4
Microprocessor Requirements ............................................................................................................46
IMUX Command Protocol ...................................................................................................................47
Out of Frame (OOF) Monitoring..........................................................................................................49
Data Transfer ......................................................................................................................................49
9.9 CONNECTIONS AND QUEUES ....................................................................................................... 50
9.10 ARBITER ..................................................................................................................................... 51
3 of 333
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
9.11 FLOW CONTROL .......................................................................................................................... 52
9.11.1 Full Duplex Flow control......................................................................................................................52
9.11.2 Half Duplex Flow control .....................................................................................................................54
9.11.3 Host-Managed Flow control ................................................................................................................54
9.12 ETHERNET INTERFACE PORT ....................................................................................................... 55
9.12.1 DTE and DCE Mode ...........................................................................................................................57
9.13 ETHERNET MAC ......................................................................................................................... 58
9.13.1 MII Mode .............................................................................................................................................60
9.13.2 RMII Mode...........................................................................................................................................60
9.13.3 PHY MII Management Block and MDIO Interface ..............................................................................61
9.14 TRANSMIT PACKET PROCESSOR .................................................................................................. 62
9.15 RECEIVE PACKET PROCESSOR .................................................................................................... 63
9.16 X.86 ENCODING AND DECODING.................................................................................................. 65
9.17 COMMITTED INFORMATION RATE CONTROLLER ............................................................................ 68
10 INTEGRATED T1/E1/J1 TRANSCEIVERS.................................................................................... 69
10.1
10.2
10.3
10.4
T1/E1/J1 TRANSCEIVER CLOCKS ................................................................................................ 69
PER-CHANNEL OPERATION.......................................................................................................... 70
T1/E1/J1 TRANSCEIVER INTERRUPTS .......................................................................................... 70
T1 FRAMER/FORMATTER CONTROL AND STATUS ......................................................................... 71
10.4.1 T1 Transmit Transparency..................................................................................................................71
10.4.2 AIS-CI and RAI-CI Generation and Detection ....................................................................................71
10.4.3 T1 Receive-Side Digital-Milliwatt Code Generation............................................................................72
10.5 E1 FRAMER/FORMATTER CONTROL AND STATUS ......................................................................... 73
10.5.1 Automatic Alarm Generation...............................................................................................................74
10.6 LOOPBACK CONFIGURATIONS ...................................................................................................... 75
10.6.1 Per-Channel Payload Loopback .........................................................................................................76
10.7 ERROR COUNTERS...................................................................................................................... 77
10.7.1
10.7.2
10.7.3
10.7.4
Line-Code Violation Counter (TR.LCVCR) .........................................................................................77
Path Code Violation Count Register (TR.PCVCR) .............................................................................78
Frames Out-of-Sync Count Register (TR.FOSCR) ............................................................................79
E-Bit Counter (TR.EBCR) ...................................................................................................................79
10.8 DS0 MONITORING FUNCTION ...................................................................................................... 80
10.9 SIGNALING OPERATION ............................................................................................................... 81
10.9.1
10.9.2
10.9.3
10.9.4
Processor-Based Receive Signaling ..................................................................................................81
Hardware-Based Receive Signaling ...................................................................................................82
Processor-Based Transmit Signaling .................................................................................................83
Hardware-Based Transmit Signaling ..................................................................................................84
10.10 PER-CHANNEL IDLE CODE GENERATION ...................................................................................... 85
10.10.1 Idle-Code Programming Examples .....................................................................................................86
10.11 CHANNEL BLOCKING REGISTERS ................................................................................................. 87
10.12 ELASTIC STORES OPERATION ...................................................................................................... 87
10.12.1 Receive Side .......................................................................................................................................87
10.12.2 Transmit Side ......................................................................................................................................88
10.12.3 Elastic Stores Initialization ..................................................................................................................88
10.13 G.706 INTERMEDIATE CRC-4 UPDATING (E1 MODE ONLY).......................................................... 89
10.14 T1 BIT-ORIENTED CODE (BOC) CONTROLLER ............................................................................. 90
10.14.1 Transmit BOC .....................................................................................................................................90
10.15 RECEIVE BOC ............................................................................................................................ 90
10.16 ADDITIONAL (SA) AND INTERNATIONAL (SI) BIT OPERATION (E1 ONLY)......................................... 91
10.16.1 Method 1: Internal Register Scheme Based on Double-Frame..........................................................91
10.16.2 Method 2: Internal Register Scheme Based on CRC4 Multiframe .....................................................91
10.17 ADDITIONAL HDLC CONTROLLERS IN T1/E1/J1 TRANSCEIVER ..................................................... 92
10.17.1 HDLC Configuration............................................................................................................................92
10.17.2 FIFO Control .......................................................................................................................................94
10.17.3 HDLC Mapping....................................................................................................................................95
4 of 333
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
10.17.4 FIFO Information .................................................................................................................................96
10.17.5 Receive Packet-Bytes Available .........................................................................................................96
10.18 LEGACY FDL SUPPORT (T1 MODE) ............................................................................................. 97
10.18.1 Overview .............................................................................................................................................97
10.18.2 Receive Section ..................................................................................................................................97
10.18.3 Transmit Section .................................................................................................................................98
10.19 D4/SLC-96 OPERATION .............................................................................................................. 98
10.20 LINE INTERFACE UNIT (LIU)......................................................................................................... 99
10.20.1 LIU Operation......................................................................................................................................99
10.20.2 Receiver ..............................................................................................................................................99
10.20.3 Transmitter ........................................................................................................................................101
10.21 MCLK PRESCALER ................................................................................................................... 102
10.22 JITTER ATTENUATOR ................................................................................................................. 102
10.23 CMI (CODE MARK INVERSION) OPTION ...................................................................................... 102
10.24 RECOMMENDED CIRCUITS ......................................................................................................... 103
10.25 T1/E1/J1 TRANSCEIVER BERT FUNCTION ................................................................................. 108
10.25.1 BERT Status .....................................................................................................................................108
10.25.2 BERT Mapping..................................................................................................................................108
10.25.3 BERT Repetitive Pattern Set ............................................................................................................110
10.25.4 BERT Bit Counter..............................................................................................................................110
10.25.5 BERT Error Counter..........................................................................................................................110
10.25.6 BERT Alternating Word-Count Rate .................................................................................................110
10.26 PAYLOAD ERROR-INSERTION FUNCTION (T1 MODE ONLY) ......................................................... 111
10.26.1 Number-of-Errors Registers..............................................................................................................111
10.26.2 Number of Errors Left Register .........................................................................................................111
11
INTERLEAVED PCM BUS OPERATION..................................................................................... 112
11.1 CHANNEL INTERLEAVE MODE .................................................................................................... 112
11.2 PROGRAMMABLE BACKPLANE CLOCK SYNTHESIZER ................................................................... 114
11.3 FRACTIONAL T1/E1 SUPPORT ................................................................................................... 114
11.4 T1/E1/J1 TRANSMIT FLOW DIAGRAMS ....................................................................................... 115
12 DEVICE REGISTERS................................................................................................................... 119
12.1 REGISTER BIT MAPS ................................................................................................................. 120
12.1.1
12.1.2
12.1.3
12.1.4
12.1.5
Global Register Bit Map ....................................................................................................................120
Arbiter Register Bit Map....................................................................................................................121
Serial Interface Register Bit Map ......................................................................................................122
Ethernet Interface Register Bit Map..................................................................................................124
MAC Register Bit Map ......................................................................................................................125
12.2 T1/E1/J1 TRANSCEIVER REGISTER BIT MAP .............................................................................. 127
12.3 GLOBAL REGISTER DEFINITIONS FOR ETHERNET MAPPER .......................................................... 132
12.4 ARBITER REGISTERS ................................................................................................................. 144
12.4.1 Arbiter Register Bit Descriptions .......................................................................................................144
12.5 SERIAL INTERFACE REGISTERS.................................................................................................. 145
12.5.1
12.5.2
12.5.3
12.5.4
12.5.5
Serial Interface Transmit and Common Registers............................................................................145
Serial Interface Transmit Register Bit Descriptions ..........................................................................145
Transmit HDLC Processor Registers................................................................................................146
X.86 Registers...................................................................................................................................152
Receive Serial Interface....................................................................................................................154
12.6 ETHERNET INTERFACE REGISTERS ............................................................................................ 167
12.6.1 Ethernet Interface Register Bit Descriptions.....................................................................................167
12.6.2 MAC Registers ..................................................................................................................................178
12.7 TRANSCEIVER REGISTERS ......................................................................................................... 194
12.7.1 Number-of-Errors Left Register.........................................................................................................292
13
FUNCTIONAL TIMING ................................................................................................................. 293
13.1 MII AND RMII INTERFACES ........................................................................................................ 293
5 of 333
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
13.2 T1 MODE .................................................................................................................................. 295
13.3 E1 MODE .................................................................................................................................. 299
14 OPERATING PARAMETERS ...................................................................................................... 304
14.1 THERMAL CHARACTERISTICS ..................................................................................................... 305
14.2 MII INTERFACE.......................................................................................................................... 306
14.3 RMII INTERFACE ....................................................................................................................... 308
14.4 MDIO INTERFACE ..................................................................................................................... 310
14.5 TRANSMIT WAN INTERFACE ...................................................................................................... 311
14.6 RECEIVE WAN INTERFACE ........................................................................................................ 312
14.7 SDRAM INTERFACE.................................................................................................................. 313
14.8 AC CHARACTERISTICS—MICROPROCESSOR BUS ...................................................................... 315
14.9 JTAG INTERFACE TIMING .......................................................................................................... 318
14.10 AC CHARACTERISTICS—RECEIVE SIDE ..................................................................................... 319
14.11 AC CHARACTERISTICS—TRANSMIT SIDE ................................................................................... 323
15 JTAG INFORMATION .................................................................................................................. 326
15.1 JTAG TAP CONTROLLER STATE MACHINE DESCRIPTION........................................................... 327
15.2 INSTRUCTION REGISTER ............................................................................................................ 330
15.2.1
15.2.2
15.2.3
15.2.4
15.2.5
15.2.6
SAMPLE:PRELOAD .........................................................................................................................330
BYPASS ............................................................................................................................................330
EXTEST ............................................................................................................................................330
CLAMP..............................................................................................................................................330
HIGHZ ...............................................................................................................................................330
IDCODE ............................................................................................................................................330
15.3 JTAG ID CODES ....................................................................................................................... 331
15.4 TEST REGISTERS ...................................................................................................................... 331
15.5 BOUNDARY SCAN REGISTER...................................................................................................... 331
15.6 BYPASS REGISTER .................................................................................................................... 331
15.7 IDENTIFICATION REGISTER ........................................................................................................ 331
15.8 JTAG FUNCTIONAL TIMING ....................................................................................................... 332
16 PACKAGE INFORMATION.......................................................................................................... 333
16.1 PACKAGE OUTLINE DRAWING OF 27MM 400-BALL BGA (VIEW FROM BOTTOM OF DEVICE).......... 333
6 of 333
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
LIST OF FIGURES
Figure 3-1. Quad T1E1 SCT to DS33R41 ...........................................................................................................................16
Figure 6-1. Detailed Block Diagram ....................................................................................................................................19
Figure 6-2. T1/E1/J1 Transceiver Block Diagram ...............................................................................................................20
Figure 6-3. Framer/LIU Interim Signals ...............................................................................................................................21
Figure 7-1. DS33R41 400-Ball BGA Pinout.........................................................................................................................33
Figure 9-1. Clocking for the DS33R41 ................................................................................................................................38
Figure 9-2. Device Interrupt Information Flow Diagram ......................................................................................................43
Figure 9-3. IMUX Interface to T1/E1 Transceivers..............................................................................................................45
Figure 9-4. Diagram of Data Transmission with IMUX Operation .......................................................................................45
Figure 9-5. Command Structure for IMUX Function............................................................................................................47
Figure 9-6. Flow Control Using Pause Control Frame ........................................................................................................53
Figure 9-7. IEEE 802.3 Ethernet Frame..............................................................................................................................55
Figure 9-8. Configured as DTE Connected to an Ethernet PHY in MII Mode .....................................................................57
Figure 9-9. DS33R41 Configured as a DCE in MII Mode....................................................................................................58
Figure 9-10. RMII Interface .................................................................................................................................................60
Figure 9-11. MII Management Frame..................................................................................................................................61
Figure 9-12. HDLC Encapsulation of MAC Frame ..............................................................................................................64
Figure 9-13. LAPS Encoding of MAC Frames Concept ......................................................................................................65
Figure 9-14. X.86 Encapsulation of the MAC field ..............................................................................................................66
Figure 10-1. Transceiver Clock Structure............................................................................................................................69
Figure 10-2. Normal Signal Flow Diagram ..........................................................................................................................75
Figure 10-3. Simplified Diagram of Receive Signaling Path................................................................................................81
Figure 10-4. Simplified Diagram of Transmit Signaling Path...............................................................................................83
Figure 10-5. CRC-4 Recalculate Method ............................................................................................................................89
Figure 10-6. Typical Monitor Application ...........................................................................................................................100
Figure 10-7. CMI Coding ...................................................................................................................................................102
Figure 10-8. Basic Interface ..............................................................................................................................................103
Figure 10-9. E1 Transmit Pulse Template.........................................................................................................................104
Figure 10-10. T1 Transmit Pulse Template.......................................................................................................................104
Figure 10-11. Jitter Tolerance ...........................................................................................................................................105
Figure 10-12. Jitter Tolerance (E1 Mode) .........................................................................................................................105
Figure 10-13. Jitter Attenuation (T1 Mode) .......................................................................................................................106
Figure 10-14. Jitter Attenuation (E1 Mode) .......................................................................................................................106
Figure 10-15. Optional Crystal Connections .....................................................................................................................107
Figure 10-16. Simplified Diagram of BERT in Network Direction ......................................................................................109
Figure 10-17. Simplified Diagram of BERT in Backplane Direction...................................................................................109
Figure 11-1. IBO Interconnection Example .......................................................................................................................113
Figure 11-2. T1/J1 Transmit Flow Diagram.......................................................................................................................115
Figure 11-3. E1 Transmit Flow Diagram ..........................................................................................................................117
Figure 13-1. MII Transmit Functional Timing.....................................................................................................................293
Figure 13-2. MII Transmit Half Duplex with a Collision Functional Timing ........................................................................293
Figure 13-3. MII Receive Functional Timing......................................................................................................................294
Figure 13-4. RMII Transmit Interface Functional Timing ...................................................................................................294
Figure 13-5. RMII Receive Interface Functional Timing ....................................................................................................294
Figure 13-6. Receive Side D4 Timing ...............................................................................................................................295
Figure 13-7. Receive Side ESF Timing .............................................................................................................................295
Figure 13-8. Receive Side 1.544MHz Boundary Timing (With Elastic Store Enabled) .....................................................296
Figure 13-9. Receive Side 2.048MHz Boundary Timing (With Elastic Store Enabled) .....................................................296
Figure 13-10. Transmit Side D4 Timing ............................................................................................................................297
Figure 13-11. Transmit Side ESF Timing ..........................................................................................................................297
Figure 13-12. Transmit Side 1.544MHz Boundary Timing (With Elastic Store Enabled) ..................................................298
Figure 13-13. Transmit Side 2.048MHz Boundary Timing (With Elastic Store Enabled) ..................................................298
Figure 13-14. Receive Side Timing ...................................................................................................................................299
Figure 13-15. Receive Side Boundary Timing, RSYSCLK = 1.544MHz (With Elastic Store Enabled)..............................299
Figure 13-16. Receive Side Boundary Timing, RSYSCLK = 2.048MHz (With Elastic Store Enabled).............................300
Figure 13-17. Receive IBO Channel Interleave Mode Timing ...........................................................................................300
Figure 13-18. G.802 Timing, E1 Mode Only......................................................................................................................301
Figure 13-19. Transmit Side Timing ..................................................................................................................................301
Figure 13-20. Transmit Side Boundary Timing (With Elastic Store Disabled) ...................................................................302
Figure 13-21. Transmit Side Boundary Timing, TSYSCLK = 1.544MHz (With Elastic Store Enabled) ............................302
7 of 333
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
Figure 13-22. Transmit Side Boundary Timing, TSYSCLK = 2.048MHz (With Elastic Store Enabled) .............................303
Figure 13-23. Transmit IBO Channel Interleave Mode Timing..........................................................................................303
Figure 14-1. Transmit MII Interface Timing .......................................................................................................................306
Figure 14-2. Receive MII Interface Timing ........................................................................................................................307
Figure 14-3. Transmit RMII Interface Timing.....................................................................................................................308
Figure 14-4. Receive RMII Interface Timing......................................................................................................................309
Figure 14-5. MDIO Interface Timing..................................................................................................................................310
Figure 14-6. Transmit WAN Timing...................................................................................................................................311
Figure 14-7. Receive WAN Timing ....................................................................................................................................312
Figure 14-8. SDRAM Interface Timing ..............................................................................................................................314
Figure 14-9. Intel Bus Read Timing (MODEC = 00)..........................................................................................................316
Figure 14-10. Intel Bus Write Timing (MODEC = 00) ........................................................................................................316
Figure 14-11. Motorola Bus Read Timing (MODEC = 01).................................................................................................317
Figure 14-12. Motorola Bus Write Timing (MODEC = 01).................................................................................................317
Figure 14-13. JTAG Interface Timing ................................................................................................................................318
Figure 14-14. Receive Side Timing, Elastic Store Disabled (T1 Mode) ............................................................................320
Figure 14-15. Receive Side Timing, Elastic Store Disabled (E1 Mode) ............................................................................321
Figure 14-16. Receive Side Timing, Elastic Store Enabled (T1 Mode) .............................................................................321
Figure 14-17. Receive Side Timing, Elastic Store Enabled (E1 Mode) .............................................................................322
Figure 14-18. Receive Line Interface Timing ....................................................................................................................322
Figure 14-19. Transmit Side Timing, Elastic Store Disabled .............................................................................................324
Figure 14-20. Transmit Side Timing, Elastic Store Enabled..............................................................................................325
Figure 14-21. Transmit Line Interface Timing ...................................................................................................................325
Figure 15-1. JTAG Functional Block Diagram ...................................................................................................................326
Figure 15-2. TAP Controller State Diagram ......................................................................................................................329
Figure 15-3. JTAG Functional Timing ...............................................................................................................................332
8 of 333
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
LIST OF TABLES
Table 2-1. T1 Related Telecommunications Specifications ................................................................................................15
Table 7-1. Detailed Pin Descriptions ...................................................................................................................................22
Table 9-1. Clocking Options for the Ethernet Interface .......................................................................................................37
Table 9-2. Reset Functions .................................................................................................................................................40
Table 9-3. Commands Sent and Received on the IMUX Links ...........................................................................................47
Table 9-4. Command and Status for the IMUX for Processor Communication ...................................................................48
Table 9-5. Registers related to Connections and Queues ..................................................................................................51
Table 9-6. Options for Flow Control ....................................................................................................................................52
Table 9-7. Registers Related to the Ethernet Port ..............................................................................................................56
Table 9-8. MAC Control Registers ......................................................................................................................................59
Table 9-9. MAC Status Registers ........................................................................................................................................59
Table 10-1. T1/E1/J1 Transmit Clock Source .....................................................................................................................70
Table 10-2. T1 Alarm Criteria ..............................................................................................................................................72
Table 10-3. E1 Sync/Resync Criteria ..................................................................................................................................73
Table 10-4. E1 Alarm Criteria..............................................................................................................................................74
Table 10-5. T1 Line Code Violation Counting Options ........................................................................................................77
Table 10-6. E1 Line-Code Violation Counting Options........................................................................................................77
Table 10-7. T1 Path Code Violation Counting Arrangements .............................................................................................78
Table 10-8. T1 Frames Out-of-Sync Counting Arrangements.............................................................................................79
Table 10-9. Time Slot Numbering Schemes .......................................................................................................................84
Table 10-10. Idle-Code Array Address Mapping .................................................................................................................85
Table 10-11. Elastic Store Delay After Initialization.............................................................................................................88
Table 10-12. HDLC Controller Registers.............................................................................................................................93
Table 10-13. Transformer Specifications ..........................................................................................................................103
Table 10-14. Transmit Error-Insertion Setup Sequence....................................................................................................111
Table 10-15 Error Insertion Examples...............................................................................................................................111
Table 12-1. Register Address Map....................................................................................................................................119
Table 12-2. Global Ethernet Mapper Register Bit Map .....................................................................................................120
Table 12-3. Arbiter Register Bit Map .................................................................................................................................121
Table 12-4. Serial Interface Register Bit Map ...................................................................................................................122
Table 12-5. Ethernet Interface Register Bit Map ...............................................................................................................124
Table 12-6. MAC Indirect Register Bit Map .......................................................................................................................125
Table 12-7. T1/E1/J1 Transceiver Register Bit Map (Active when CST = 0) ....................................................................127
Table 12-8. Available IMUX User Commands...................................................................................................................137
Table 12-9. TPD Control ...................................................................................................................................................246
Table 12-10 E1 Mode With Automatic Gain Control Mode Enabled (TLBC.6 = 0)............................................................247
Table 12-11. E1 Mode With Automatic Gain Control Mode Disabled (TLBC.6 = 1)..........................................................247
Table 12-12. T1 Mode With Automatic Gain Control Mode Enabled (TLBC.6 = 0)...........................................................247
Table 12-13. T1 Mode With Automatic Gain Control Mode Disabled (TLBC.6 = 1) ..........................................................247
Table 14-1. Recommended DC Operating Conditions ......................................................................................................304
Table 14-2. DC Electrical Characteristics..........................................................................................................................304
Table 14-3. Thermal Characteristics .................................................................................................................................305
Table 14-4. Theta-JA vs. Airflow .......................................................................................................................................305
Table 14-5. Transmit MII Interface ....................................................................................................................................306
Table 14-6. Receive MII Interface .....................................................................................................................................307
Table 14-7. Transmit RMII Interface..................................................................................................................................308
Table 14-8. Receive RMII Interface...................................................................................................................................309
Table 14-9. MDIO Interface...............................................................................................................................................310
Table 14-10. Transmit WAN Interface...............................................................................................................................311
Table 14-11. Receive WAN Interface ................................................................................................................................312
Table 14-12. SDRAM Interface .........................................................................................................................................313
Table 14-13. AC Characteristics—Microprocessor Bus ....................................................................................................315
Table 14-14. JTAG Interface .............................................................................................................................................318
Table 14-15. AC Characteristics—Receive Side...............................................................................................................319
Table 14-16. AC Characteristics—Transmit Side..............................................................................................................323
Table 15-1. Instruction Codes for IEEE 1149.1 Architecture.............................................................................................330
Table 15-2. ID Code Structure ..........................................................................................................................................331
9 of 333
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
1 DESCRIPTION
The DS33R41 provides interconnection and mapping functionality between Ethernet packet systems and T1/E1/J1
WAN time-division multiplexed (TDM) systems. The device is composed of a 10/100 Ethernet MAC, packet arbiter,
committed information rate controller (CIR), HDLC/X.86 (LAPS) mapper, SDRAM interface, control ports, four bit
error-rate testers (BERTs), and four integrated T1/E1/J1 transceivers. The packet interface consists of an MII/RMII
Ethernet PHY interface. The Ethernet interface can be configured for 10Mbps or 100Mbps service. The DS33R41
encapsulates Ethernet traffic with HDLC or X.86 (LAPS) encoding to be transmitted over up to four T1, E1, or J1
lines. The T1/E1/J1 interfaces also receive encapsulated Ethernet packets and transmit the extracted packets over
the Ethernet ports. Access is provided between the serial port and the integrated T1/E1/J1 transceivers to the
intermediate signal bus that is based on the Dallas Semiconductor integrated bus operation (IBO), running at
8.192Mbps.
The device includes four software-selectable T1, E1, or J1 transceivers for short-haul and long-haul applications.
Each transceiver is composed of a line interface unit (LIU), framer, and two additional HDLC controllers. The
transceivers are software compatible with the popular DS2155 and DS21455.
The LIU is composed of a transmit interface, receive interface, and a jitter attenuator. The transmit interface is
responsible for generating the necessary waveshapes for driving the network and providing the correct source
impedance depending on the type of media used. T1 waveform generation includes DSX-1 line build-outs as well
as CSU line build-outs of -7.5dB, -15dB, and -22.5dB. E1 waveform generation includes G.703 waveshapes for
both 75Ω coax and 120Ω twisted cables. The receive interface provides network termination and recovers clock
and data from the network. The receive sensitivity adjusts automatically to the incoming signal and can be
programmed for 0dB to 43dB or 0dB to 12dB for E1 applications and 0dB to 15dB or 0dB to 36dB for T1
applications. The jitter attenuator removes phase jitter from the transmitted or received signal. The crystal-less jitter
attenuator requires only a 2.048MHz MCLK for both E1 and T1 applications (with the option of using a 1.544MHz
MCLK in T1 applications) and can be placed in either transmit or receive data paths. An additional feature of the
LIU is a CMI coder/decoder for interfacing to optical networks.
On the transmit side, clock/data, and frame-sync signals are provided to the framer by the backplane interface
section. The framer inserts the appropriate synchronization framing patterns and alarm information, calculates and
inserts the CRC codes, and provides the B8ZS/HDB3 (zero code suppression) and AMI line coding. The receiveside framer decodes AMI, B8ZS, and HDB3 line coding, synchronizes to the data stream, reports alarm
information, counts framing/coding/CRC errors, and provides clock/data and frame-sync signals to the backplane
interface section.
The transmit and receive paths of the integrated transceivers also have two HDLC controllers. The HDLC
controllers transmit and receive data via the framer block. The HDLC controllers can be assigned to any time slot,
group of time slots, portion of a time slot, or to FDL (T1) or Sa bits (E1). Each controller has 128-bit FIFOs, thus
reducing the amount of processor overhead required to manage the flow of data. In addition, built-in support for
reducing the processor time required handles SS7 applications.
The backplane interface of the integrated transceivers provides a method of sending and receiving data from the
integrated Ethernet Mapper over an interleaved 8.192MHz TDM (IBO) bus. The elastic stores are required for IBO
operation and they manage slip conditions.
10 of 333
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
An 8-bit parallel microcontroller port provides access for control and configuration of all the features of the device.
The internal 100MHz SDRAM controller interfaces to a 32-bit wide 128Mbit SDRAM. The SDRAM is used to buffer
the data from the Ethernet and WAN ports for transport. The external SDRAM can accommodate up to 8192
frames with a maximum frame size of 2016 bytes. Diagnostic capabilities include SDRAM BIST, loopbacks, PRBS
pattern generation/detection, and 16-bit loop-up and loop-down code generation and detection. The DS33R41
operates with a 1.8V core supply and 3.3V I/O supply.
The integrated Ethernet mapper is software compatible with the DS33Z41 quad inverse-multiplexing Ethernet
mapper. There are a few things to note when porting a DS33Z41 application to this device:
• RSER has been renamed to RSERI.
• RCLK has been renamed to RCLKI.
• TSER has been renamed to TSERO.
• TCLK has been renamed to TCLKE.
The integrated T1/E1/J1 transceivers are software compatible with the DS21458 quad T1/E1/J1 transceiver. There
are a few things to note when porting a DS21458 application to this device:
• The facilities data link (FDL) support is available through software only. The TLINK, RLINK, TLCLK,
RLCLK pins are not available on the DS33R41.
• Multiplexed microprocessor bus mode is not supported on the DS33R41.
• The extended system information bus (ESIB) is not supported on the DS33R41.
• The RSIGF signaling freeze indication hardware pin is not available.
• The user output pins UOP1, UOP2, UOP3, and UOP4 are not available.
11 of 333
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
2
2.1
FEATURE HIGHLIGHTS
General
•
•
•
•
•
•
2.2
Microprocessor Interface
•
•
•
•
•
•
2.3
Link aggregation for up to four T1/E1 links
8.192Mbps IBO interface to Dallas Semiconductor Framers/Transceivers
Differential delay compensation up to 7.75ms for the 4 T1/E1 links
Handshaking protocol between local and distant end for establishment of aggregation
HDLC Ethernet Mapping
•
•
•
•
•
•
•
•
•
•
2.5
Parallel control port with 8-bit data bus
Nonmultiplexed Intel and Motorola timing modes
Internal software reset and external hardware reset input pin
Supports polled or interrupt-driven environments
Software access to device ID and silicon revision
Global interrupt output pin
Link Aggregation (Inverse Multiplexing)
•
•
•
•
2.4
400-pin, 27mm BGA package
1.8V and 3.3V supplies
IEEE 1149.1 JTAG boundary scan
Software access to device ID and silicon revision
Development support includes evaluation kit, driver source code, and reference designs
Programmable output clocks for fractional T1, E1, H0, and H12 applications
Dedicated HDLC controller engine for protocol encapsulation
Compatible with polled or interrupt driven environments
Programmable FCS insertion and extraction
Programmable FCS type
Supports FCS error insertion
Programmable packet size limits (minimum 64 bytes and maximum 2016 bytes)
Supports bit stuffing/destuffing
Selectable packet scrambling/descrambling (X43+1)
Separate FCS errored packet and aborted packet counts
Programmable inter-frame fill for transmit HDLC
X.86 (Link Access Protocol for SONET/SDH) Ethernet Mapping
•
•
•
•
•
•
•
•
•
•
Programmable X.86 address/control fields for transmit and receive
Programmable 2-byte protocol (SAPI) field for transmit and receive
32-bit FCS
Transmit transparency processing—7E is replaced by 7D, 5E
Transmit transparency processing—7D replaced by 7D, 5D
Receive rate adaptation (7D, DD) is deleted.
Receive transparency processing—7D, 5E is replaced by 7E
Receive transparency processing—7D, 5D is replaced by 7D
Receive abort sequence the LAPS packet is dropped if 7D7E is detected
Self-synchronizing X43 + 1 payload scrambling.
12 of 333
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
2.6
Additional HDLC Controllers in the Integrated T1/E1/J1 Transceiver
•
•
•
•
•
•
•
•
2.7
Committed Information Rate (CIR) Controllers
•
•
•
2.8
CIR controller limits transmission of data from the Ethernet Interface to the serial interface
CIR granularity at 512kbps
CIR Averaging for smoothing traffic peaks
SDRAM Interface
•
•
•
•
•
•
2.9
Two additional independent HDLC controllers
Fast load and unload features for FIFOs
SS7 support for FISU transmit and receive
Independent 128-byte Rx and Tx buffers with interrupt support
Access FDL, Sa, or single/multiple DS0 channels
DS0 access includes Nx64 or Nx56
Compatible with polled or interrupt driven environments
Bit-oriented code (BOC) support
Interface for 128Mbit, 32-bit wide SDRAM
SDRAM Interface speed up to 100MHz
Auto refresh timing
Automatic precharge
Master clock provided to the SDRAM
No external components required for SDRAM connectivity
T1/E1/J1 Framer
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Fully independent transmit and receive functionality
Full receive- and transmit-path transparency
T1 framing formats include D4, ESF, J1-D4, J1-ESF and SLC-96
Japanese J1 support for CRC6 and yellow alarm
E1 framing formats include FAS, CAS, and CRC-4
Detailed alarm- and status-reporting with optional interrupt support
Large path- and line-error counters for:
T1—BPV, CV, CRC6, and framing bit errors
E1—BPV, CV, CRC-4, E-bit, and frame alignment errors
Timed or manual update modes
User-defined Idle Code Generation on a per-channel basis in both transmit and receive paths
Digital milliwatt code generation on the receive path
ANSI T1.403-1998 support
G.965 V5.2 link detect
RAI-CI, AIS-CI detection and generation
Ability to monitor one DS0 channel in both the transmit and receive paths
Three independent, In-band repeating-pattern generators and detectors
Patterns from 1 bit to 8 bits or 16 bits in length
RCL, RLOS, RRA, and RAIS alarms interrupt on change of state
Flexible signaling support
Software- or hardware-based
Interrupt generated on change of signaling data
Receive-signaling freeze on loss of sync, carrier loss, or frame slip
Hardware pins to indicate carrier loss and signaling freeze
Automatic RAI generation to ETS 300 011 specifications
Expanded access to Sa and Si bits
Option to extend carrier-loss criteria to a 1ms period as per ETS 300 233
13 of 333
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
2.10 Line Interface
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Requires a single master clock (MCLK) for both E1 and T1 operation. Master clock can be 2.048MHz,
4.096MHz, 8.192MHz, or 16.384MHz. Option to use 1.544MHz, 3.088MHz, 6.276MHz, or 12.552MHz
for T1-only operation
Fully software configurable
Short- and long-haul applications
Automatic receive sensitivity adjustments
Ranges include 0dB to -43dB or 0dB to -12dB for E1 applications; 0dB to -36dB or 0dB to -15dB for T1
applications
Receive level indication in 2.5dB steps from -42.5dB to -2.5dB
Internal receive termination option for 75Ω, 100Ω, and 120Ω lines
Monitor application gain settings of 20dB, 26dB, and 32dB
G.703 receive-synchronization signal-mode
Flexible transmit-waveform generation
T1 DSX-1 line build-outs
T1 CSU line build-outs of -7.5dB, -15dB, and -22.5dB
E1 waveforms include G.703 waveshapes for both 75Ω coax and 120Ω twisted cables
AIS generation independent of loopbacks
Alternating ones and zeros generation
Square-wave output
Open-drain output option
NRZ format option
Transmitter power-down
Transmitter 50mA short-circuit limiter with exceeded indication of current limit
Transmit open-circuit-detected indication
Line interface function can be completely decoupled from the framer/formatter
2.11 MAC Interface
•
•
•
•
•
•
•
•
•
•
•
MAC port with standard MII (less TX_ER) or RMII
10Mbps and 100Mbps data rates
Configurable DTE or DCE modes
Facilitates auto-negotiation by host microprocessor
Programmable half- and full-duplex modes
Flow control for both half-duplex (back-pressure) and full-duplex (PAUSE) modes
Programmable Maximum MAC frame size up to 2016 bytes
Minimum MAC frame size: 64 bytes
Discards frames greater than programmed maximum MAC frame size and runt, nonoctet bounded, or
bad-FCS frames upon reception
Programmable threshold for SDRAM queues to initiate flow control and status indication
MAC loopback support for transmit data looped to receive data at the MII/RMII interface
2.12 Clock Synthesizer
•
•
Output frequencies include 2.048MHz, 4.096MHz, 8.192MHz, and 16.384MHz
Derived from recovered line clock or master clock
2.13 Jitter Attenuator
•
•
•
•
32-bit or 128-bit crystal-less jitter attenuator
Requires only a 2.048MHz master clock for both E1 and T1 operation with the option to use 1.544MHz
for T1 operation
Can be placed in either the receive or transmit path or disabled
Limit trip indication
14 of 333
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
2.14 System Interface
•
•
•
•
•
•
•
•
Dual two-frame, independent receive and transmit elastic stores
o Independent control and clocking
o Controlled-slip capability with status
o Minimum-delay mode supported
Supports T1 to E1 conversion
Ability to pass the T1 F-bit position through the elastic stores in the 2.048MHz backplane mode
Programmable output clocks for fractional T1, E1, H0, and H12 applications
Interleaving PCM bus operation with rates of 4.096MHz, 8.192MHz, and 16.384MHz
Hardware-signaling capability
o Receive-signaling reinsertion to a backplane, multiframe sync
o Availability of signaling in a separate PCM data stream
o Signaling freezing
Access to the data streams in between the framer/formatter and the elastic stores
User-selectable synthesized clock output
2.15 Test and Diagnostics
•
•
•
•
•
•
•
•
•
•
IEEE 1149.1 Support
Programmable on-chip BERT
Patterns include Pseudorandom QRSS, Daly, and user-defined repetitive patterns
Error insertion for a single bit or continuous
Insertion options include continuous and absolute number with selectable insertion rates
Total-bit and errored-bit counters
Payload Error Insertion
Errors can be inserted over the entire frame or selected channels
F-bit corruption for line testing
Loopbacks (remote, local, analog, and per-channel payload loopback)
2.16 Specifications Compliance
The DS33R41 meets relevant telecommunications specifications. The following table provides the specifications
and relevant sections that are applicable to the DS33R41.
Table 2-1. T1 Related Telecommunications Specifications
IEEE 802.3-2002 - CSMA/CD access method and physical layer specifications.
RFC1662 - PPP in HDLC-like Framing
RFC2615 - PPP over SONET/SDH
X.86 - Ethernet over LAPS
RMII - Industry Implementation Agreement for “Reduced MII Interface”, Sept 1997
ANSI - T1.403-1995, T1.231-1993, T1.408
AT&T: TR54016, TR62411
ITU: G.703, G.704, G.706, G.736, G.775, G.823, G.932, I.431, O.151, O.161
ETSI: ETS 300 011, ETS 300 166, ETS 300 233, CTR4, CTR12
Japanese: JTG.703, JTI.431, JJ-20.11 (CMI coding only)
15 of 333
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
3 APPLICATIONS
Bonded Transparent LAN Service
LAN Extension
Ethernet Delivery over T1/E1/J1
Also see Application Note 3411: DS33Z11—Ethernet LAN to Unframed T1/E1 WAN Bridge for an example of a
complete LAN to WAN design.
Figure 3-1. Quad T1E1 SCT to DS33R41
Four
T1/E1/J1
Lines
RMII, MII
10 Base T
100 Base T
DS33R41
Ethernet
Clock
Sources
SDRAM
16 of 333
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
4 ACRONYMS AND GLOSSARY
•
•
•
•
•
•
•
•
•
BERT - Bit Error Rate Tester
DCE - Data Communication Interface
DTE- Data Terminating Interface
FCS - Frame Check Sequence
HDLC - High Level Data Link Control
MAC - Media Access Control
MII - Media Independent Interface
RMII - Reduced Media Independent Interface
WAN - Wide Area Network
Note: Previous versions of this document used the term “Subscriber” to refer to the Ethernet Interface function.
The register names have been allowed to remain with a “SU.” prefix to avoid register renaming.
Note: Previous versions of this document used the term “Line” to refer to the Serial Interface. The register names
have been allowed to remain with a “LI.” prefix to avoid register renaming.
Note: The terms “Transmit Queue” and “Receive Queue” are with respect to the Ethernet Interface. The Receive
Queue is the queue for the data that arrives on the MII/RMII interface, is processed by the MAC and stored in the
SDRAM. Transmit queue is for data that arrives from the Serial port, is processed by the HDLC and stored in the
SDRAM to be sent to the MAC transmitter.
Note: This data sheet assumes a particular nomenclature of the T1 and E1 operating environment. In each 125µs
T1 frame, there are 24 8-bit channels plus a framing bit. It is assumed that the framing bit is sent first followed by
channel 1. For T1 and E1 each channel is made up of 8 bits, which are numbered 1 to 8. Bit 1, the MSB, is
transmitted first. Bit 8, the LSB, is transmitted last. The term “locked” is used to refer to two clock signals that are
phase- or frequency-locked or derived from a common clock (i.e., a 1.544MHz clock can be locked to a 2.048MHz
clock if they share the same 8kHz component).
TIME SLOT NUMBERING SCHEMES
Time Slot 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31
Channel 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32
Phone
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
16 17 18 19 20 21 22 23 24 25 26 27 28 29 30
Channel
17 of 333
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
5 MAJOR OPERATING MODES
Microprocessor control is possible through the 8-bit parallel control port and provides configuration for all the
features of the device. The Ethernet Link Transport Engine in the device can be configured for HDLC or X.86
encapsulation.
The integrated transceivers can be software configured for T1, E1, or J1 operation. Each is composed of a line
interface unit (LIU), framer, two additional HDLC controllers, and a TDM backplane interface, and is controlled via
an 8-bit parallel port configured for Intel or Motorola bus operations.
The LIUs are composed of a transmit interface, receive interface, and a jitter attenuator. The transmit interface is
responsible for generating the necessary waveshapes for driving the network and providing the correct source
impedance depending on the type of media used. T1 waveform generation includes DSX-1 line build-outs as well
as CSU line build-outs of -7.5dB, -15dB, and -22.5dB. E1 waveform generation includes G.703 waveshapes for
both 75Ω coax and 120Ω twisted cables. The receive interface provides network termination and recovers clock
and data from the network. The receive sensitivity adjusts automatically to the incoming signal and can be
programmed for 0dB to 43dB or 0dB to 12dB for E1 applications and 0dB to 15dB or 0dB to 36dB for T1
applications. The jitter attenuator removes phase jitter from the transmitted or received signal. The crystal-less jitter
attenuator requires only a 2.048MHz MCLK for both E1 and T1 applications (with the option of using a 1.544MHz
MCLK in T1 applications) and can be placed in either transmit or receive data paths.
More information on microprocessor control is available in Section 8.1.
18 of 333
19 of 333
PACKET
HDLC/X.86
BERT
ETHERNET
MAPPER
ARBITER
ETHERNET MAC
CIR
CONTROLLER
PACKET
HDLC/X.86
TRANSMIT
SERIAL
PORT
TRANSMIT
FRAMER
CLAD
JTAG Pins
SDCS
SRAS
SCAS
SWE
SBA[0:1]
SDATA[0:32]
SDMASK[0:4]
SDCLK
JTAG2
RECEIVE
SERIAL
PORT
HDLC
RSERI
RCLKI
RBSYNC
BERT
T1/E1/J1
TRANSCEIVERS
HDLC
RCHBLK
RCHCLK
RCLKO
RSERO
MUX
RECEIVIE
FRAMER
MUX
RNEGO
RPOSO
RRING
RDCLKO
RTIP
TRANSMIT
LIU
TRING
RECEIVE
LIU
TTIP
JTAG Pins
CST
CS
A0–A9
D0–D7
WR
RD
INT
TSERO
TCLKE
TBSYNC
TCHBLK
TCHCLK
TCLKT
TSERI
TNEGO
TPOSO
TDCLKO
MCLK
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
6 BLOCK DIAGRAMS
Figure 6-1. Detailed Block Diagram
DS33R41
µP Port
CLAD
JTAG1
SDRAM PORT
SYSCLKI
(RMII MODE)
RXD[0:1]
RX_CLK
CRS_DV
RX_ERR
REF_CLK
REF_CLKO
TX_EN
TXD[0:1]
MDC
MDIO
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
Figure 6-2. T1/E1/J1 Transceiver Block Diagram
RNEGO
RPOSO
RCLKO
MCLK2
MCLK1
TRANSCEIVER #4
TRANSCEIVER #3
TRANSCEIVER #2
2 HDLCs
MASTER
CLOCK
RECEIVE
LIU
RTIP
RRING
CLOCK & DATA
RECOVERY
LOCAL
LOOP
BACK
FRAMER
LOOP
BACK
REMOTE
LOOP
BACK
BERT
RECEIVE
FRAMER
SYNCHRONIZATION
ALARM MONITORING
SIGNALING EXTRACTION
HDLC EXTRACTION
DS0 CONDITIONING
HDB3/B8ZS DECODER
JITTER
ATTEN.
BACKPLANE
CLOCK
RECEIVE
BACKPLANE
INTERFACE
ELASTIC STORES
SIGNALING BUFFERS
INTERLEAVE BUS
RATE CONVERSION
PAYLOAD LOOPBACK
BPCLK
RSYSCLK
RCLK
RSERO
RSIG
RSYNC
RFSYNC
RMSYNC
RCHCLK
RCHBLK
TX
OR RX
PATH
TTIP
TRING
TRANSMIT
LIU
WAVESHAPE
GENERATION
TPD
TRANSMIT
FRAMER
FRAMING
CRC RECALCULATE(E1)
ALARM INSERTION
SIGNALING INSERTION
HDLC INSERTION
DS0 CONDITIONING
HDB3/B8ZS CODER
JITTER
ATTEN.
Transceiver
s
JTDOn
JTDIn
ELASTIC STORES
SIGNALING BUFFERS
INTERLEAVE BUS
RATE CONVERSION
PAYLOAD LOOPBACK
2 HDLCs BERT
(1 OF 4 TRANSCEIVERS)
JTAG
TRANSMIT
TRANSMIT
BACKPLANE
BACKPLANE
INTERFACE
INTERFACE
TPOSO
TCLKO
TNEGO
JTCLKn
JTMSn
JTRSTn
20 of 333
CPU INTERFACE
NON-MUX, INTEL/MOTOROLA
TSYSCLK
TCLK
TSERI
TSIG
TSYNC
TSSYNC
TCHCLK
TCHBLK
RLOS/LOTC
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
6.1
Framer/LIU Interim Signals
The user has limited access to clock and data signals between the framer and LIU on all transceivers as shown in
Figure 6-3. Access to the clock and bipolar data signals between the framer and LIU function can be used for
specialized applications.
Figure 6-3. Framer/LIU Interim Signals
RPOSO2
RNEGO2
RCLKO2
RPOSO1
RNEGO1
RCLKO1
#2
#1
Rx
LIU
Rx
FRAMER
Tx
LIU
Tx
FRAMER
Rx
LIU
Rx
FRAMER
Tx
LIU
Tx
FRAMER
TPOSO1
TNEGO1
TCLKO1
TPOSO2
TNEGO2
TCLKO2
RPOSO3
RNEGO3
RCLKO3
RPOSO4
RNEGO4
RCLKO4
#3
Rx
LIU
Rx
FRAMER
Tx
LIU
Tx
FRAMER
#4
Rx
LIU
Rx
FRAMER
Tx
LIU
TPOSO3
TNEGO3
TCLKO3
Tx
FRAMER
TPOSO4
TNEGO4
TCLKO4
21 of 333
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
7
7.1
PIN DESCRIPTIONS
Pin Functional Description
Note that all digital pins are inout pins in JTAG mode. This feature increases the effectiveness of board level ATPG
patterns.
I = input, O = output, Ipu = input with pullup, Oz = output with tri-state, IO = bidirectional pin, IOz = bidirectional pin with tri-state
Table 7-1. Detailed Pin Descriptions
NAME
PIN
TYPE
A0
A19
I
A1
A2
A3
A4
A5
A6
A7
A8
A9
A20
C18
B18
E18
A18
E17
C17
D17
C16
I
I
I
I
I
I
I
I
I
D0
G17
IOZ
D1
A17
IOZ
D2
F17
IOZ
D3
F16
IOZ
D4
E16
IOZ
D5
D16
IOZ
D6
B15
IOZ
D7
C15
IOZ
WR/RW
A16
I
RD /DS
F15
I
FUNCTION
MICROPROCESSOR PORT
Address Bit 0. Address bit 0 of the microprocessor interface. Least
Significant Bit.
Address Bit 1. Address bit 1 of the microprocessor interface.
Address Bit 2. Address bit 2 of the microprocessor interface.
Address Bit 3. Address bit 3 of the microprocessor interface.
Address Bit 4. Address bit 4 of the microprocessor interface.
Address Bit 5. Address bit 5 of the microprocessor interface.
Address Bit 6. Address bit 6 of the microprocessor interface.
Address Bit 7. Address bit 7 of the microprocessor interface.
Address Bit 8. Address bit 8 of the microprocessor interface.
Address Bit 9. Address bit 9 of the microprocessor interface.
Data Bit 0. Bidirectional data bit 0 of the microprocessor interface. Least
Significant Bit. Not driven when CS = 1 or RST = 0.
Data Bit 1. Bidirectional data bit 1 of the microprocessor interface. Not
driven when CS = 1 or RST = 0.
Data Bit 2. Bidirectional data bit 2 of the microprocessor interface. Not
driven when CS = 1 or RST = 0.
Data Bit 3. Bidirectional data bit 3 of the microprocessor interface. Not
driven when CS = 1 or RST = 0.
Data Bit 4. Bidirectional data bit 4 of the microprocessor interface. Not
driven when CS = 1 or RST = 0.
Data Bit 5. Bidirectional data bit 5 of the microprocessor interface. Not
driven when CS = 1 or RST = 0.
Data Bit 6. Bidirectional data bit 6 of the microprocessor interface. Not
driven when CS = 1 or RST = 0.
Data Bit 7. Bidirectional data bit 7 of the microprocessor interface. Most
Significant Bit. Not driven when CS = 1 or RST = 0.
Write (Intel Mode). The DS33R41 captures the contents of the data bus
(D0–D7) on the rising edge of WR and writes them to the addressed
register location.
CS must be held low during write operations.
Read Write (Motorola Mode). Used to indicate read or write operation.
RW must be set high for a register read cycle and low for a register write
cycle.
Read Data Strobe (Intel Mode). The DS33R41 drives the data bus (D0–
D7) with the contents of the addressed register while RD and CS are both
low.
Data Strobe (Motorola Mode). Used to latch data through the
microprocessor interface. DS must be low during read and write
operations.
22 of 333
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
NAME
PIN
TYPE
CS
H16
I
CST
W6
I
INT
E15
OZ
COL_DET
N20
I
RX_CRS/
CRS_DV
N19
I
RX_CLK
K19
IO
RXD[0]
RXD[1]
RXD[2]
RXD[3]
J19
H18
J18
H19
O
RX_DV
K18
I
K20
I
L18
IO
RX_ERR
TX_CLK
FUNCTION
Chip Select for Protocol Conversion Device. This pin must be taken
low for read/write operations. When CS is high, the RD/DS and WR
signals are ignored.
Chip Select for the T1/E1/J1 Transceivers. Must be low to read or write
the T1/E1/J1 Transceivers
Interrupt Output. Outputs a logic zero when an unmasked interrupt
event is detected. INT is deasserted when all interrupts have been
acknowledged and serviced. Active low. Inactive state is programmable in
register GL.CR1. This pin is deasserted when all interrupts have been
acknowledged and serviced. Active low. Inactive state is programmable in
register GL.CR1.
MII/RMII PHY PORT
Collision Detect (MII). Asserted by the MAC PHY to indicate that a
collision is occurring. In DCE Mode this signal should be connected to
ground. This signal is only valid in half duplex mode, and is ignored in full
duplex mode
Receive Carrier Sense (MII). Should be asserted (high) when data from
the PHY (RXD[3:0) is valid. For each clock pulse 4 bits arrive from the
PHY. Bit 0 is the least significant bit. In DCE mode, connect to VDD.
Carrier Sense/Receive Data Valid (RMII). This signal is asserted (high)
when data is valid from the PHY. For each clock pulse 2 bits arrive from
the PHY. In DCE mode, this signal must be grounded.
Receive Clock (MII). Timing reference for RX_DV, RX_ERR and
RXD[3:0], which are clocked on the rising edge. RX_CLK frequency is
25MHz for 100Mbps operation and 2.5MHz for 10Mbps operation. In DTE
mode, this is a clock input provided by the PHY. In DCE mode, this is an
output derived from REF_CLK providing 2.5MHz (10Mbps operation) or
25MHz (100Mbps operation).
Receive Data 0 through 3(MII). Four bits of received data, sampled
synchronously with the rising edge of RX_CLK. For every clock cycle, the
PHY transfers 4 bits to the DS33R41. RXD[0] is the least significant bit of
the data. Data is not considered valid when RX_DV is low.
Receive Data 0 through 1(RMII). Two bits of received data, sampled
synchronously with REF_CLK with 100Mbps Mode. Accepted when
CRS_DV is asserted. When configured for 10Mbps Mode, the data is
sampled once every 10 clock periods.
Receive Data Valid (MII). This active high signal indicates valid data from
the PHY. The data RXD is ignored if RX_DV is not asserted high.
Receive Error (MII). Asserted by the MAC PHY for one or more RX_CLK
periods indicating that an error has occurred. Active High indicates
Receive code group is invalid. If CRS_DV is low, RX_ERR has no effect.
This is synchronous with RX_CLK. In DCE mode, this signal must be
grounded.
Receive Error (RMII). Signal is synchronous to REF_CLK;
Transmit Clock (MII). Timing reference for TX_EN and TXD[3:0]. The
TX_CLK frequency is 25MHz for 100Mbps operation and 2.5MHz for
10Mbps operation.
In DTE mode, this is a clock input provided by the PHY. In DCE mode,
this is an output derived from REF_CLK providing 2.5MHz (10Mbps
operation) or 25MHz (100Mbps operation).
23 of 333
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
NAME
PIN
TYPE
TXD[0]
TXD[1]
TXD[2]
TXD[3]
L20
M19
M18
M20
O
FUNCTION
Transmit Data 0 through 3(MII). TXD [3:0] is presented synchronously
with the rising edge of TX_CLK. TXD [0] is the least significant bit of the
data. When TX_EN is low the data on TXD should be ignored.
TX_EN
L19
O
Transmit Data 0 through 1(RMII). Two bits of data TXD [1:0] presented
synchronously with the rising edge of REF_CLK.
Transmit Enable (MII). This pin is asserted high when data TXD [3:0] is
being provided by the DS33R41. The signal is deasserted prior to the first
nibble of the next frame. This signal is synchronous with the rising edge
TX_CLK. It is asserted with the first bit of the preamble.
REF_CLK
C20
I
REF_CLKO
G19
O
DCEDTES
L17
I
RMIIMIIS
K13
I
MDC
E20
O
MDIO
F20
IO
SCAS
R14
O
SRAS
P15
O
SDCS
R15
O
Transmit Enable (RMII). When this signal is asserted, the data on TXD
[1:0] is valid. This signal is synchronous to the REF_CLK.
Reference Clock (RMII and MII). When in RMII mode, all signals from
the PHY are synchronous to this clock input for both transmit and receive.
This required clock can be up to 50MHz and should have ±100ppm
accuracy.
When in MII mode in DCE operation, the DS33R41 uses this input to
generate the RX_CLK and TX_CLK outputs as required for the Ethernet
PHY interface. When the MII interface is used with DTE operation, this
clock is not required and should be tied low.
Reference Clock Output (RMII and MII). A derived clock output up to
50MHz, generated by internal division of the SYSCLKI signal. Frequency
accuracy of the REF_CLKO signal will be proportional to the accuracy of
the user-supplied SYSCLKI signal. This output can be used for the
RMII/MII interface clock by external connection to REF_CLK. This
capability eliminates the need for an additional 50MHz (RMII) or 25MHz
(MII) PHY reference oscillator. See Section 9.1.2 for more information.
DCE or DTE Selection. The user must set this pin high for DCE Mode
selection or low for DTE Mode. In DCE Mode, the DS33R41 MAC port
can be directly connected to another MAC. In DCE Mode, the Transmit
clock (TX_CLK) and Receive clock (RX_CLK) are output by the
DS33R41. Note that there is no software bit selection of DCEDTES. Note
that DCE Mode is only relevant when the MAC interface is in MII mode.
RMII or MII Selection. Set high to configure the MAC for RMII interfacing.
Set low for MII interfacing.
PHY MANAGEMENT BUS
Management Data Clock (MII). Clocks management data between the
PHY and DS33R41. The clock is derived from the REF_CLK, with a
maximum frequency is 1.67MHz. The user must leave this pin
unconnected in the DCE Mode.
MII Management data IO (MII). Data path for control information between
the PHY and DS33R41. When not used, pull to logic high externally
through a 10kΩ resistor. The MDC and MDIO pins are used to write or
read up to 32 Control and Status Registers in 32 PHY Controllers. This
port can also be used to initiate Auto-Negotiation for the PHY. The user
must leave this pin unconnected in the DCE Mode.
SDRAM CONTROLLER
SDRAM Column Address Strobe. Active low output, used to latch the
column address on the rising edge of SDCLKO. It is used with commands
for Bank Activate, Precharge, and Mode Register Write.
SDRAM Row Address Strobe. Active low output, used to latch the row
address on rising edge of SDCLKO. It is used with commands for Bank
Activate, Precharge, and Mode Register Write.
SDRAM Chip Select. Active low output enables SDRAM access.
24 of 333
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
NAME
PIN
TYPE
SWE
T15
O
SBA[0]
SBA[1]
R16
W15
O
SDATA[0]
SDATA[1]
SDATA[2]
SDATA[3]
SDATA[4]
SDATA[5]
SDATA[6]
SDATA[7]
SDATA[8]
SDATA[9]
SDATA[10]
SDATA[11]
SDATA[12]
SDATA[13]
SDATA[14]
SDATA[15]
SDATA[16]
SDATA[17]
SDATA[18]
SDATA[19]
SDATA[20]
SDATA[21]
SDATA[22]
SDATA[23]
SDATA[24]
SDATA[25]
SDATA[26]
SDATA[27]
SDATA[28]
SDATA[29]
SDATA[30]
SDATA[31]
SDA[0]
SDA[1]
SDA[2]
SDA[3]
SDA[4]
SDA[5]
SDA[6]
SDA[7]
SDA[8]
SDA[9]
SDA[10]
SDA[11]
SDMASK[0]
SDMASK[1]
SDMASK[2]
SDMASK[3]
W11
M15
Y11
M14
U12
T13
R13
W13
V13
W12
V12
V11
R12
T11
T12
U11
T18
W18
P19
P20
W19
Y20
V19
W20
U20
U19
T20
T19
Y19
U18
V18
R18
T17
U16
Y17
W17
U17
W16
Y16
V16
T16
V15
R17
P16
Y13
P14
P18
V17
SDCLKO
U14
IO
FUNCTION
SDRAM Write Enable. This active low output enables write operation
and auto precharge.
SDRAM Bank Select. These 2 bits select 1 of 4 banks for the
read/write/precharge operations. Note: All SDRAM operations are
controlled entirely by the DS33R41. No user programming for SDRAM
buffering is required.
SDRAM Data Bus Bits 0 through 31. The 32 pins of the SDRAM data
bus are inputs for read operations and outputs for write operations. At all
other times, these pins are high-impedance.
Note: All SDRAM operations are controlled entirely by the DS33R41. No
user programming for SDRAM buffering is required.
O
SDRAM Address Bus 0 through 11. The 12 pins of the SDRAM address
bus output the row address first, followed by the column address. The row
address is determined by SDA0 to SDA11 at the rising edge of clock.
Column address is determined by SDA0–SDA9 and SDA11 at the rising
edge of the clock. SDA10 is used as an auto-precharge signal.
Note: All SDRAM operations are controlled entirely by the DS33R41. No
user programming for SDRAM buffering is required.
O
O
4mA
SDRAM Mask 0 through 3. When high, a write is done for that byte. The
least significant byte is SDATA7 to SDATA0. The most significant byte is
SDATA31 to SDATA24.
SDRAM CLK Out. System clock output to the SDRAM. This clock is a
buffered version of SYSCLKI.
25 of 333
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
NAME
PIN
RTIP1
N1
RRING1
M1
RTIP2
J13
RRING2
J12
RTIP3
E6
RRING3
F6
RTIP4
T9
RRING4
R9
TTIP1
T1
U1
TRING1
V1
W1
TTIP2
A12
B12
TRING2
A11
B11
TTIP3
E1
E2
TRING3
F1
F2
TTIP4
W8
Y8
TYPE
FUNCTION
T1/E1/J1 ANALOG LINE INTERFACES
Receive Analog Tip Input for Transceiver 1. Analog inputs for clock
I
recovery circuitry. These pins connect via a 1:1 transformer to the
network. See Section 10 for details.
Receive Analog Ring Input for Transceiver 1. Analog inputs for clock
I
recovery circuitry. These pins connect via a 1:1 transformer to the
network. See Section 10 for details.
Receive Analog Tip Input for Transceiver 2. Analog inputs for clock
I
recovery circuitry. These pins connect via a 1:1 transformer to the
network. See Section 10 for details.
Receive Analog Ring Input For Transceiver 2. Analog inputs for clock
I
recovery circuitry. These pins connect via a 1:1 transformer to the
network. See Section 10 for details.
Receive Analog Tip Input for Transceiver 3. Analog inputs for clock
I
recovery circuitry. These pins connect via a 1:1 transformer to the
network. See Section 10 for details.
Receive Analog Ring Input for Transceiver 3. Analog inputs for clock
I
recovery circuitry. These pins connect via a 1:1 transformer to the
network. See Section 10 for details.
Receive Analog Tip Input for Transceiver 4. Analog inputs for clock
I
recovery circuitry. These pins connect via a 1:1 transformer to the
network. See Section 10 for details.
Receive Analog Ring Input for Transceiver 4. Analog inputs for clock
I
recovery circuitry. These pins connect via a 1:1 transformer to the
network. See Section 10 for details.
Transmit Analog Tip Output for Transceiver 1. Analog line-driver
outputs. Two connections are provided to improve signal quality. These
O
pins connect via a 1:2 step-up transformer to the network. See Section 10
for details.
Transmit Analog Ring Output for Transceiver 1. Analog line-driver
outputs. Two connections are provided to improve signal quality. These
O
pins connect via a 1:2 step-up transformer to the network. See Section 10
for details.
Transmit Analog Tip Output for Transceiver 2. Analog line-driver
outputs. Two connections are provided to improve signal quality. These
O
pins connect via a 1:2 step-up transformer to the network. See Section 10
for details.
Transmit Analog Ring Output for Transceiver 2. Analog line-driver
outputs. Two connections are provided to improve signal quality. These
O
pins connect via a 1:2 step-up transformer to the network. See Section 10
for details.
Transmit Analog Tip Output for Transceiver 3. Analog line-driver
outputs. Two connections are provided to improve signal quality. These
O
pins connect via a 1:2 step-up transformer to the network. See Section 10
for details.
Transmit Analog Ring Output for Transceiver 3. Analog line-driver
outputs. Two connections are provided to improve signal quality. These
O
pins connect via a 1:2 step-up transformer to the network. See Section 10
for details.
Transmit Analog Tip Output for Transceiver 4. Analog line-driver
outputs. Two connections are provided to improve signal quality. These
O
pins connect via a 1:2 step-up transformer to the network. See Section 10
for details.
26 of 333
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
NAME
PIN
TYPE
FUNCTION
Transmit Analog Ring Output for Transceiver 4. Analog line-driver
outputs. Two connections are provided to improve signal quality. These
O
pins connect via a 1:2 step-up transformer to the network. See Section 10
for details.
T1/E1/J1 TRANSMIT FRAMER INTERFACE
Transmit Serial Data for Transceivers 1–4. Transmit NRZ serial data.
Sampled on the falling edge of TCLKT when the transmit-side elastic
I
store is disabled. Sampled on the falling edge of TSYSCLK when the
transmit-side elastic store is enabled.
Transmit System Clock for Transceivers 1–4. 8.192MHz clock used for
Interleaved Bus Operation. Used when the transmit-side elastic-store
I
function is enabled. See the Interleaved PCM Bus Operation section for
details on 8.192MHz operation using the IBO.
Transmit System Sync for Transceivers 1–4. Only used when the
transmit-side elastic store is enabled. A pulse at this pin will establish
I
either frame or multiframe boundaries for the transmit side. Should be tied
low in applications that do not use the transmit-side elastic store.
Transmit Clock for Transceivers 1–4. 1.544MHz or a 2.048MHz
primary clock. Used to clock data through the transmit-side formatter. Not
I
used for most DS33R41 applications.
TRING4
W9
Y9
TSERI1
TSERI2
TSERI3
TSERI4
TSYSCLK1
TSYSCLK2
TSYSCLK3
TSYSCLK4
TSSYNC1
TSSYNC2
TSSYNC3
TSSYNC4
TCLKT1
TCLKT2
TCLKT3
TCLKT4
Y4
B9
J2
R7
H4
J5
A6
Y5
W4
E13
A2
N13
U4
A9
J3
N9
TCHBLK1
TCHBLK2
TCHBLK3
TCHBLK4
M4
A14
D3
P11
O
TCHCLK1
TCHCLK2
TCHCLK3
TCHCLK4
Y3
C13
E3
L9
O
TSYNC1
TSYNC2
TSYNC3
TSYNC4
W3
D13
C2
P6
I/O
TSIG1
TSIG2
TSIG3
TSIG4
V5
B8
H2
P7
I
Transmit Channel Block for Transceivers 1–4. A user-programmable
output that can be forced high or low during any of the channels.
Synchronous with TSYSCLK when the transmit-side elastic store is
enabled. Useful for locating individual channels in drop-and-insert
applications, for external per-channel loopback, and for per-channel
conditioning.
Transmit Channel Clock for Transceivers 1–4. A 192kHz (T1) or
256kHz (E1) clock that pulses high during the LSB of each channel. Can
also be programmed to output a gated transmit-bit clock for fractional
T1/E1 applications. Synchronous with TSYSCLK when the transmit-side
elastic store is enabled. Useful for parallel-to-serial conversion of channel
data.
Transmit Sync for Transceivers 1–4. A pulse at this pin will establish
either frame or multiframe boundaries for the transmit side. Can be
programmed to output either a frame or multiframe pulse. If this pin is set
to output pulses at frame boundaries, it can also be set via IOCR1.3 to
output double-wide pulses at signaling frames in T1 mode.
Transmit Signaling Input for Transceivers 1–4. When enabled, this
input will sample signaling bits for insertion into outgoing PCM data
stream. Sampled on the falling edge of TCLKT when the transmit-side
elastic store is disabled. Sampled on the falling edge of TSYSCLK when
the transmit-side elastic store is enabled.
27 of 333
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
NAME
PIN
TYPE
FUNCTION
ETHERNET MAPPER TRANSMIT SERIAL INTERFACE
Transmit Serial Data Output. Output on the rising edge of TCLKE.
O
Formatted to be IBO compatible.
Serial Interface Transmit Clock Input. The 8.192MHz clock reference
I
for TSERO, which is output on the rising edge of the clock.
Transmit Data Enable Port n (Input). An 8kHz synchronization pulse,
used to denote the first Channel 1 of the 8.192Mbps byte-interleaved IBO
IO
data stream. Note that this input is also used to generate the transmit
byte synchronization if X.86 mode is enabled.
T1/E1/J1 RECEIVE FRAMER INTERFACE
Receive Serial Data Output for T1/E1/J1 Transceivers 1–4. Received
NRZ serial data. Updated on the rising edges of RSYSCLK when the
O
receive-side elastic store is enabled. In most DS33R41 applications, all 4
RSERO outputs should be tied together and connected to RSERI.
Receive System Clock for T1/E1/J1 Transceivers 1–4. 8.192MHz
system clock. Used when the receive-side elastic-store function is
I
enabled. In most DS33R41 applications, all 4 RSYSCLK inputs should be
tied together and connected to RCLKI. See the Interleaved PCM Bus
Operation section for details on 8.192MHz operation using the IBO.
TSERO
K15
TCLKE
K14
TBSYNC
K16
RSERO1
RSERO2
RSERO3
RSERO4
K4
K9
B5
T7
RSYSCLK1
RSYSCLK2
RSYSCLK3
RSYSCLK4
K1
K10
C6
Y6
RCLKO1
RCLKO2
RCLKO3
RCLKO4
W5
C8
H1
N7
RCHBLK1
RCHBLK2
RCHBLK3
RCHBLK4
P3
B14
A4
M8
O
RCHCLK1
RCHCLK2
RCHCLK3
RCHCLK4
P2
D14
B4
V7
O
RSYNC1
RSYNC2
RSYNC3
RSYNC4
Y2
A15
B3
M9
I/O
RFSYNC1
RFSYNC2
RFSYNC3
RFSYNC4
RMSYNC1
RMSYNC2
RMSYNC3
RMSYNC4
RSIG1
RSIG2
RSIG3
RSIG4
R1
E14
C4
M10
Y1
F13
A3
V9
M3
H11
D5
U8
O
Receive Clock Output from the Framer on Transceiver 1. Buffered
recovered clock from Transceiver 1. Not used for most DS33R41
applications.
Receive Channel Block for Transceivers 1–4. A user-programmable
output that can be forced high or low during any of the 24 T1 or 32 E1
channels. Synchronous with RSYSCLK when the receive-side elastic
store is enabled. Also useful for locating individual channels in drop-andinsert applications, for external per-channel loopback, and for per-channel
conditioning. See the Channel Blocking Registers section.
Receive Channel Clock for Transceivers 1–4. A 192kHz (T1) or
256kHz (E1) clock that pulses high during the LSB of each channel can
also be programmed to output a gated receive-bit clock for fractional
T1/E1 applications. Synchronous with RSYSCLK when the receive-side
elastic store is enabled. Useful for parallel-to-serial conversion of channel
data.
Receive Sync for Transceivers 1–4. An extracted pulse, one RSYSCLK
wide, is output at this pin, which identifies either frame (TR.IOCR1.5 = 0)
or multiframe (TR.IOCR1.5 = 1) boundaries. If set to output-frame
boundaries then via TR.IOCR1.6, RSYNC can also be set to output
double-wide pulses on signaling frames in T1 mode. If the receive-side
elastic store is enabled, then this pin can be enabled to be an input via
TR.IOCR1.4 at which a frame or multiframe boundary pulse is applied.
O
Receive Frame Sync (Pre Receive Elastic Store) for Transceivers
1–4. An extracted 8kHz pulse, one RSYSCLK wide, is output at this pin,
which identifies frame boundaries.
O
Receive Multiframe Sync for Transceivers 1–4. An extracted pulse,
one RSYSCLK wide, is output at this pin, which identifies multiframe
boundaries.
O
Receive Signaling Output for Transceiver 1. Outputs signaling bits in a
PCM format. Updated on the rising edges of RSYSCLK when the receiveside elastic store is enabled.
28 of 333
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
NAME
PIN
RSERI
L16
RCLKI
L14
RBSYNC
L15
RDCLKO1
RDCLKO2
RDCLKO3
RDCLKO4
RNEGO1
RNEGO2
RNEGO3
RNEGO4
RPOSO1
RPOSO2
RPOSO3
RPOSO4
TCLKO1
TCLKO2
TCLKO3
TCLKO4
TNEGO1
TNEGO2
TNEGO3
TNEGO4
TPOSO1
TPOSO2
TPOSO3
TPOSO4
V4
D12
C1
P10
N4
G9
D7
V6
N3
J10
A5
U7
R4
E11
G3
M11
P4
C12
F3
N10
R3
E12
F4
N11
TYPE
FUNCTION
ETHERNET MAPPER RECEIVE SERIAL INTERFACE
Receive Serial Data Input. Receive Serial data arrives on the rising edge
I
of the clock. Note: Unused timeslots on this pin must be filled with all
1s.
Serial Interface Receive Clock Input. Reference clock for receive serial
I
data on RSERI. Gapped clocking is supported, up to the maximum RCLKI
frequency of 52MHz.
Receive Data Enable Port n. An 8kHz synchronization pulse, used to
denote the first Channel 1 of the 8.192Mbps byte-interleaved IBO data
I
stream. Note that this input is also used to generate the receive byte
synchronization if X.86 mode is enabled.
T1/E1/J1 FRAMER/LIU INTERIM SIGNALS
O
Receive Clock Output from the LIU on Transceivers 1–4. Buffered
recovered clock from the network.
O
Receive Negative Data from the LIU on Transceivers 1–4. Updated on
the rising edge of RDCLKO with the bipolar data out of the line interface.
O
Receive Positive Data from the LIU on Transceivers 1–4. Updated on
the rising edge of RDCLKO with bipolar data out of the line interface.
O
Transmit Clock Output from the Framer on Transceivers 1–4.
Buffered clock that is used to clock data through the transmit-side
formatter (either TCLKT or RCLKI).
O
Transmit Negative-Data Output from Framer on Transceivers 1–4.
Updated on the rising edge of TCLKO with the bipolar data out of the
transmit-side formatter.
O
Transmit Positive-Data Output from Framer on Transceivers 1–4.
Updated on the rising edge of TCLKO with the bipolar data out of the
transmit-side formatter. Can be programmed to source NRZ data via the
output-data format (TR.IOCR1.0)-control bit.
29 of 333
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
NAME
PIN
TSTRST
L2
RST
H15
TPD
D6
MODEC[0]
MODEC[1]
E7
G15
RLOS/LOTC1
R2
RLOS/LOTC2
C14
RLOS/LOTC3
D4
RLOS/LOTC4
V8
QOVF
G18
TYPE
FUNCTION
HARDWARE AND STATUS PINS
Test/Reset. A dual-function pin. A zero-to-one transition issues a
hardware reset to the transceiver register set. A reset clears all
configuration registers. Configuration register contents are set to zero.
I
Leaving TSTRST high will tri-state all output and I/O pins (including the
parallel control port). Set low for normal operation. Useful in board-level
testing.
Reset. An active low signal on this pin resets the internal registers and
logic. This pin should remain low until power, SYSCLKI, RX_CLK, and
I
TX_CLK are stable, then set high for normal operation. This input
requires a clean edge with a rise time of 25ns or less to properly reset the
device.
Transceiver Transmit Power-Down. The TPD pin along with the TPD bit
I
in the LIC1 register (LIC1.0) controls the state of the Transmit PowerDown function. See the TPD bit description in Section 12 and Table 12-9..
Mode Control
00 = Read/Write Strobe Used (Intel Mode)
I
01 = Data Strobe Used (Motorola Mode)
10 = Reserved. Do not use.
11 = Reserved. Do not use.
Receive Loss of Sync/Loss of Transmit Clock for Transceiver 1. A
dual-function output that is controlled by the TR.CCR1.0 control bit. This
pin can be programmed to either toggle high when the synchronizer is
O
searching for the frame and multiframe or to toggle high if the TCLKT pin
has not been toggled for 5µs.
Receive Loss of Sync/Loss of Transmit Clock for Transceiver 2. A
dual-function output that is controlled by the TR.CCR1.0 control bit. This
pin can be programmed to either toggle high when the synchronizer is
O
searching for the frame and multiframe or to toggle high if the TCLKT pin
has not been toggled for 5µs.
Receive Loss of Sync/Loss of Transmit Clock for Transceiver 3. A
dual-function output that is controlled by the TR.CCR1.0 control bit. This
pin can be programmed to either toggle high when the synchronizer is
O
searching for the frame and multiframe or to toggle high if the TCLKT pin
has not been toggled for 5µs.
Receive Loss of Sync/Loss of Transmit Clock for Transceiver 4.
A dual-function output that is controlled by the TR.CCR1.0 control bit.
This pin can be programmed to either toggle high when the synchronizer
O
is searching for the frame and multiframe or to toggle high if the TCLKT
pin has not been toggled for 5µs.
Queue Overflow. This pin goes high when the transmit or receive queue
O
has overflowed. This pin will go low when the high watermark is reached
again.
30 of 333
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
NAME
PIN
TYPE
SYSCLKI
Y14
I
BPCLK1
L3
O
BPCLK2
G8
O
MCLK1
K2
I
MCLK2
L12
I
JTCLK1
J17
Ipu
JTDI1
K17
Ipu
JTRST1
G14
Ipu
JTDO1
H14
Oz
JTMS1
G13
Ipu
JTCLK2
P9
Ipu
JTDI2
C7
Ipu
JTRST2
L13
Ipu
JTDO2
L10
Oz
FUNCTION
SYSTEM CLOCKS
System Clock In. 100MHz System Clock input to the DS33R41, used for
internal operation. This clock is buffered and provided at SDCLKO for the
SDRAM interface. The DS33R41 also provides a divided version output
at the REF_CLKO pin. A clock supply with ±100ppm frequency accuracy
is suggested.
Backplane Clock, Transceiver 1. A user-selectable synthesized clock
output that is referenced to the clock that is output at the RCLKO pin.
Backplane Clock, Transceiver 2. A user-selectable synthesized clock
output that is referenced to the clock that is output at the RCLKO pin.
Master Clock for Transceiver 1 and Transceiver 2. A (50ppm) clock
source. This clock is used internally for both clock/data recovery and for
the jitter attenuator for both T1 and E1 modes. The clock rate can be
16.384MHz, 8.192MHz, 4.096MHz, or 2.048MHz. When using the
transceiver in T1-only operation a 1.544MHz (50ppm) clock source can
be used. MCLK1 and MCLK2 can be driven from a common clock.
Master Clock for Transceiver 3 and Transceiver 4. A (50ppm) clock
source. This clock is used internally for both clock/data recovery and for
the jitter attenuator for both T1 and E1 modes. The clock rate can be
16.384MHz, 8.192MHz, 4.096MHz, or 2.048MHz. When using the
transceiver in T1-only operation a 1.544MHz (50ppm) clock source can
be used. MCLK1 and MCLK2 can be driven from a common clock.
JTAG INTERFACES
JTAG Clock for the Ethernet Mapper. This signal is used to shift data
into JTDI1 on the rising edge and out of JTDO1 on the falling edge.
JTAG Data In for the Ethernet Mapper. Test instructions and data are
clocked into this pin on the rising edge of JTCLK1. This pin has a 10kΩ
pullup resistor.
JTAG Reset for the Ethernet Mapper. JTRST1 is used to
asynchronously reset the test access port controller. After power up, a
rising edge on JTRST1 will reset the test port and cause the device I/O to
enter the JTAG DEVICE ID mode. Pulling JTRST1 low restores normal
device operation. JTRST1 is pulled HIGH internally via a 10kΩ resistor
operation. If boundary scan is not used, this pin should be held low.
JTAG Data Out for the Ethernet Mapper. Test instructions and data are
clocked out of this pin on the falling edge of JTCLK1. If not used, this pin
should be left unconnected.
JTAG Mode Select for the Ethernet Mapper. This pin is sampled on the
rising edge of JTCLK1 and is used to place the test access port into the
various defined IEEE 1149.1 states. This pin has a 10kΩ pullup resistor.
JTAG Clock 2 for the T1/E1/J1 Transceivers. This signal is used to shift
data into JTDI2 on the rising edge and out of JTDO2 on the falling edge
JTAG Data In 2 for the T1/E1/J1 Transceivers. Test instructions and
data are clocked into this pin on the rising edge of JTCLK2. This pin has a
10kΩ pullup resistor.
JTAG Reset 2 for the T1/E1/J1 Transceivers. JTRST2 is used to
asynchronously reset the test access port controller. After power-up,
JTRST2 must be toggled from low to high. This action will set the device
into the JTAG DEVICE ID mode. Normal device operation is restored by
pulling JTRST2 low. JTRST2 is pulled HIGH internally via a 10kΩ resistor
operation.
JTAG Data Out 2 for the T1/E1/J1 Transceivers. Test instructions and
data are clocked out of this pin on the falling edge of JTCLK2. If not used,
this pin should be left unconnected.
31 of 333
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
NAME
PIN
TYPE
JTMS2
L11
Ipu
VDD1.8
VDD3.3
VSS
RVDD
RVSS
TVDD
TVSS
DVDD
DVSS
N.C.
J16, M13, M17,
N14, N15, N16,
N17, P17, R20,
T14, V20, W14,
Y15, Y18
B16, B17, B19,
B20, C19, D18,
D19, D20, E19,
F18, F19, G16
A1, D15, F11,
F12, F14, G4,
G5, G7, G10,
G11, G12, G20,
H3, H5, H6, H7,
H8, H9, H10,
H20, J6, J7, J8,
J9, J15, J20,
K3, K5, K6, K7,
K8, L4, L5, L6,
L7, L8, M5, M6,
M7, M12, M16,
N8, N12, N18,
P12, P13, R6,
R11, R19, U13,
U15, V14, Y12
P1, J14, F7, R8
E5, F5, G6,
H12, H13, J11,
L1, M2, N2,
R10, T8, T10
A10, B10, G1,
G2, V2, W2,
W10, Y10
A13, B13, D1,
D2, T2, U2, W7,
Y7
B6, C9, C10,
C11, D8, D9,
D10, D11, E8,
E9, E10, F8, F9,
F10, J4
B1, B2, C3, J1,
N5, N6, P5, P8,
R5, T3, T4, T5,
T6, U5, U6, U9,
U10, V10
A7, A8, B7, C5,
E4, H17, K11,
K12, U3, V3
FUNCTION
JTAG Mode Select 2 for the T1/E1/J1 Transceivers. This pin is
sampled on the rising edge of JTCLK2 and is used to place the testaccess port into the various defined IEEE 1149.1 states. This pin has a
10kΩ pullup resistor.
POWER SUPPLY PINS
I
VDD1.8. Connect to 1.8V power supply.
I
VDD3.3. Connect to 3.3V power supply.
I
VSS. Connect to the common supply ground.
—
Receive Analog Positive Supply. Connect to 3.3V power supply.
—
Receive Analog Signal Ground
—
Transmit Analog Positive Supply. Connect to 3.3V power supply.
—
Transmit Analog Signal Ground
—
Digital Positive Supply. Connect to 3.3V power supply.
—
Digital Signal Ground
—
No Connection. Do not connect these pins. Leave these pins open.
32 of 333
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
Figure 7-1. DS33R41 400-Ball BGA Pinout
1
A
VSS
B
DVSS
2
3
4
5
6
7
8
9
10
11
12
13
N.C.
N.C.
TCLKT2
TVDD
TRING2
TTIP2
TVSS
TCHBLK2 RSYNC2 WR / RW
DVDD
N.C.
TSIG2
TSERI2
TVDD
TRING2
TTIP2
TVSS
RCHBLK
2
D6
D7
TSSYNC RMSYNC RCHBLK
TSYSCLK
RPOSO3
3
3
3
3
DVSS
C RCLKO3 TSYNC3
RSYNC3
RCHCLK
RSERO3
3
14
15
17
18
19
20
D1
A5
A0
A1
VDD
VDD
A3
VDD
VDD
A9
A7
A2
VDD
REF_CLK
D5
A8
VDD
VDD
VDD
INT
D4
A6
A4
VDD
MDC
DVSS
RFSYNC
3
N.C.
RSYSCL
K3
JTDI2
RCLK2
DVDD
DVDD
DVDD
TNEGO2 TCHCLK2
RLOS/LO
TC2
DVDD
RCLKO2 TSYNC2
RCHCLK HWMOD
2
E
D
TVSS
TVSS
TCHBLK3
RLOS/LO
TC3
RSIG3
LIUC
RNEGO3
DVDD
DVDD
DVDD
E
TTIP3
TTIP3
TCHCLK3
N.C.
RVSS
RTIP3
MODEC
[0]
DVDD
DVDD
DVDD
F TRING3 TRING3 TNEGO3 TPOSO3
RVSS
RRING3
RVDD
DVDD
DVDD
TCLKO2 TPOSO2
TSSYNC RFSYNC
2
2
16
DVDD
VSS
VSS
RMSYNC
2
VSS
VSS
VSS
JTMS1
JTRST1
MODEC
[1]
VDD
D0
QOVF
REF_
CLKO
AFCS
VSS
RD / DS
D3
D2
VDD
VDD
MDIO
G
TVDD
TVDD
TCLKO3
VSS
VSS
RVSS
VSS
H
RCLK3
TSIG3
VSS
TSYSCLK
1
VSS
VSS
VSS
VSS
VSS
VSS
RSIG2
RVSS
RVSS
JTDO1
RST
CS
N.C.
RXD[1]
RXD
[3]
H10S0
J
DVSS
TSERI3
TCLKT3
DVDD
TSYSCLK
2
VSS
VSS
VSS
VSS
RPOSO2
RVSS
RRING2
RTIP2
RVDD
VSS
VDD1.8
JTCLK1
RXD[2]
RXD
[0]
FULLH0
K
RSYSCL
K1
MCLK1
VSS
RSERO1
VSS
VSS
VSS
VSS
RSERO2
RSYSCL
K2
N.C.
N.C.
RMIIMIIS
TCLKE
TSER0
TBSYNC
JTDI1
RX_DV
L
RVSS
TSTRST
BPCLK1
VSS
VSS
VSS
VSS
VSS
TCHCLK4
JTDO2
JTMS2
MCLK2
JTRST2
ZRCLKI0 RBSYNC
M RRING1
RVSS
RSIG1
TCHBLK1
VSS
VSS
VSS
VSS
VDD1.8
SDATA3 SDATA1
N
RTIP1
RVSS
RPOSO1 RNEGO1
DVSS
DVSS
RCLK4
VSS
TCLKT4 TNEGO4 TPOSO4
VSS
TSSYNC
4
VDD1.8
P
RVDD1
RCHCLK RCHBLK
TNEGO1
1
1
DVSS
TSYNC4
TSIG4
DVSS
JTCLK2
VSS
VSS
RFSYNC RLOS/LO
TPOSO1 TCLKO1
1
TC1
DVSS
VSS
TSERI4
RVDD
RRING4
RVSS
VSS
R
BPCLK2 RNEGO2
RCHBLK
RFSYNC
RSYNC4
TCLKO4
4
4
RCLKO4 TCHBLK4
SDATA
SDATA[6]
[12]
RSERI DCEDTES TX_CLK
RX_CLK RX_ERR
TX_EN
TXD
[0]
TXD
[1]
TXD
[3]
VSS
VDD1.8
TXD
[2]
VDD1.8
VDD1.8
VDD1.8
VSS
SDMASK
[1]
SRAS
SDA11
VDD1.8
SDMASK
[2]
SDATA
[18]
SDATA
[19]
SCAS
SDCS
SBA
[0]
SDA
[10]
SDATA
[31]
VSS
VDD1.8
RX_CRS /
COL_DET
CRS_DV
T
TTIP1
TVSS
DVSS
DVSS
DVSS
DVSS
RSERO4
RVSS
RTIP4
RVSS
SDATA
[13]
SDATA
SDATA[5] VDD1.8
[14]
SWE
SDA
[8]
SDA
[0]
SDATA
[16]
SDATA
[27]
SDATA
[26]
U
TTIP1
TVSS
N.C.
TCLKT1
DVSS
DVSS
RPOSO4
RSIG4
DVSS
DVSS
SDATA
[15]
SDATA
[4]
VSS
SDCLKO
VSS
SDA
[1]
SDA
[4]
SDATA
[29]
SDATA
[25]
SDATA
[24]
V TRING1
TVDD
N.C.
RCLKO1
TSIG1
RNEGO4
DVSS
SDATA
[11]
SDATA
[10]
SDATA
[8]
VSS
SDA
[9]
SDA
[7]
SDMASK
[3]
SDATA
[30]
SDATA
[22]
VDD1.8
W TRING1
TVDD
TSYNC1
TSSYNC
1
RCLK1
CST
SDATA
[7]
VDD1.8
SBA
[1]
SDA
[5]
SDA
[3]
SDATA
[17]
SDATA
[20]
SDATA
[23]
VDD1.8
SDA
[6]
SDA
[2]
VDD1.8
SDATA
[28]
SDATA
[21]
Y
RMSYNC
TSYSCLK RSYSCL
RSYNC1 TCHCLK1 TSERI1
1
4
K4
RCHCLK RLOS/LO RMSYNC
4
TC4
4
TVSS
TTIP4
TRING4
TVDD
SDATA
[0]
SDATA
[9]
TVSS
TTIP4
TRING4
TVDD
SDATA
[2]
VSS
33 of 333
SDMASK
SYSCLKI
[0]
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
8
FUNCTIONAL DESCRIPTION
The DS33R41 provides interconnection and mapping functionality between Ethernet Packet Systems and T1/E1/J1
WAN Time-Division Multiplexed (TDM) systems. The device is composed of a 10/100 Ethernet MAC, Packet
Arbiter, Committed Information Rate Controller (CIR), HDLC/X.86 (LAPS) Mapper, SDRAM interface, control ports,
four Bit Error Rate Testers (BERTs), and four integrated T1/E1/J1 Transceivers. The packet interface consists of a
MII/RMII Ethernet PHY interface. The Ethernet interface can be configured for 10Mbps or 100Mbps service. The
DS33R41 encapsulates Ethernet traffic with HDLC or X.86 (LAPS) encoding to be transmitted over up to four T1,
E1, or J1 lines. The T1/E1/J1 interfaces also receive encapsulated Ethernet packets and transmit the extracted
packets over the Ethernet ports. Access is provided between the Serial port and the integrated T1/E1/J1
Transceivers to the intermediate signal bus that is based on the Dallas Semiconductor Integrated Bus Operation
(IBO), running at 8.192Mbps.
The Ethernet Packet interface supports both MII and RMII mode, allowing the DS33R41 to connect to
commercially available Ethernet PHY and MAC devices. The Ethernet interface can be individually configured for
10Mbps or 100Mbps service, in DTE and DCE configurations. The DS33R41 MAC interface can be configured to
reject frames with bad FCS and short frames (less than 64 bytes).
Ethernet frames are queued and stored in external 32-bit SDRAM. The DS33R41 SDRAM controller enables
connection to a 128Mbit SDRAM without external glue logic, at clock frequencies up to 100MHz. The SDRAM is
used for both the Transmit and Receive Data Queues. The Receive Queue stores data to be sent from the Packet
interface to the WAN interface. The Transmit Queue stores data to be sent from the WAN interface to the Packet
interface. The external SDRAM can accommodate up to 8192 frames with a maximum frame size of 2016 bytes.
The sizing of the queues can be adjusted by software. The user can also program high and low watermarks for
each queue that can be used for automatic or manual flow control. The packet data stored in the SDRAM is
encapsulated in HDLC or X.86 (LAPS) to be transmitted over the WAN interfaces. The device also provides the
capability for bit and packet scrambling.
The WAN interface also receives encapsulated Ethernet packets and transmits the extracted packets over the
Ethernet port. The WAN physical interface supports up to 4 serial data streams on a 8.192Mbps IBO bus. The
WAN serial port can operate with a gapped clock, and can be connected to a framer or T/E-Carrier transceiver for
transmission to the WAN. The WAN interface can be seamlessly connected to the Dallas Semiconductor/Maxim
T1/E1/J1 Framers and Single-Chip Transceivers (SCTs).
The DS33R41 can be configured through an 8-bit microprocessor interface port. The DS33R41 also provides 2 onboard clock dividers for the System Clock input and Reference Clock Input for the 802.3 interfaces, further
reducing the need for ancillary devices.
The four integrated T1/E1/J1 transceivers can be software configured for T1, E1, or J1 operation. Each transceiver
is composed of a line interface unit (LIU), framer, dual HDLC controllers, and a TDM backplane interface. The
transceivers are software compatible with the DS21455, DS21458, and the older DS21Q55.
The LIU is composed of a transmit interface, receive interface, and a jitter attenuator. The transmit interface is
responsible for generating the necessary waveshapes for driving the network and providing the correct source
impedance depending on the type of media used. T1 waveform generation includes DSX-1 line build-outs as well
as CSU line build-outs of -7.5dB, -15dB, and -22.5dB. E1 waveform generation includes G.703 waveshapes for
both 75Ω coax and 120Ω twisted cables. The receive interface provides network termination and recovers clock
and data from the network. The receive sensitivity adjusts automatically to the incoming signal and can be
programmed for 0dB to 43dB or 0dB to 12dB for E1 applications and 0dB to 15dB or 0dB to 36dB for T1
applications. The jitter attenuator removes phase jitter from the transmitted or received signal. The crystal-less jitter
attenuator requires only a 2.048MHz MCLK for both E1 and T1 applications (with the option of using a 1.544MHz
MCLK in T1 applications) and can be placed in either transmit or receive data paths.
On the transmit side, clock/data, and frame-sync signals are provided to the framer by the backplane interface
section. The framer inserts the appropriate synchronization framing patterns and alarm information, calculates and
inserts the CRC codes, and provides the B8ZS/HDB3 (zero code suppression) and AMI line coding. The receiveside framer decodes AMI, B8ZS, and HDB3 line coding, synchronizes to the data stream, reports alarm
information, counts framing/coding/CRC errors, and provides clock/data and frame-sync signals to the backplane
interface section.
34 of 333
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
Both the transmit and receive path have two HDLC controllers. The HDLC controllers transmit and receive data via
the framer block. The HDLC controllers can be assigned to any time slot, group of time slots, portion of a time slot,
or to FDL (T1) or Sa bits (E1). Each controller has 128-bit FIFOs, thus reducing the amount of processor overhead
required to manage the flow of data. In addition, built-in support for reducing the processor time required handles
SS7 applications.
The backplane interface of the integrated transceivers provides a method of sending and receiving data from the
integrated Ethernet Mapper over an interleaved 8.192MHz TDM (IBO) bus. The Elastic Stores are required for IBO
operation, and manage slip conditions.
The parallel port provides access for control and configuration of all the transceiver’s features. Diagnostic
capabilities include loopbacks, PRBS pattern generation/detection, and 16-bit loop-up and loop-down code
generation and detection.
8.1
Processor Interface
Microprocessor control of the DS33R41 is accomplished through the interface pins of the microprocessor port. The
8-bit parallel data bus can be configured for Intel or Motorola modes of operation with the two MODEC[0:1] pins.
When MODEC = 00, bus timing is in Intel mode, as shown in Figure 14-9 and Figure 14-10. When MODEC = 01,
bus timing is in Motorola mode, as shown in Figure 14-11 and Figure 14-12. The address space is mapped
through the use of 10 address lines, A0 – A9. Multiplexed Mode is not supported on the processor interface.
The Chip Select (CS) pin must be brought to a logic low level to gain read and write access to the microprocessor
port of the Ethernet Mapper. The CST pin must be brought to a logic low level to gain read and write access to the
microprocessor port of the integrated T1/E1 transceivers. With Intel timing selected, the Read (RD) and Write (WR)
pins are used to indicate read and write operations and latch data through the interface. With Motorola timing
selected, the Read-Write (RW) pin is used to indicate read and write operations while the Data Strobe (DS) pin is
used to latch data through the interface.
The interrupt output pin (INT) is an open-drain output that will assert a logic-low level upon a number of software
maskable interrupt conditions. This pin is normally connected to the microprocessor interrupt input. The register
map is shown in Table 12-1.
35 of 333
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
8.1.1
Read-Write/Data Strobe Modes
The processor interface can operate in either read-write strobe mode or data strobe mode. When MODEC = 00 the
read-write strobe mode is enabled and a negative pulse on RD performs a read cycle, and a negative pulse on WR
performs a write cycle. When MODEC = 01 the data strobe mode is enabled and a negative pulse on DS when RW
is high performs a read cycle, and a negative pulse on DS when RW is low performs a write cycle. The read-write
strobe mode is commonly called the “Intel” mode, and the data strobe mode is commonly called the “Motorola”
mode. See the timing diagrams in the AC Electrical Characteristics for more details.
8.1.2
Clear on Read
The latched status registers will clear on a read access. It is important to note that in a multi-task software
environment, the user should handle all status conditions of each register at the same time to avoid inadvertently
clearing status conditions. The latched status register bits are carefully designed so that an event occurrence
cannot collide with a user read access.
8.1.3
Interrupt and Pin Modes
The interrupt (INT) pin is configurable to drive high or float when not active. The INTM bit controls the pin
configuration, when it is set the INT pin will drive high when not active. After reset, the INT pin is in high impedance
mode until an interrupt source is active and enabled to drive the interrupt pin.
36 of 333
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
9 ETHERNET MAPPER
9.1
Ethernet Mapper Clocks
The DS33R41 clocks sources and functions are as follows:
•
Serial Transmit Data (TCLKE) and Serial Receive Data (RCLKI) clock inputs are used to transfer data from
the serial interface. These clocks can be continuous or gapped.
•
System Clock (SYSCLKI) input. Used for internal operation. This clock input cannot be a gapped clock. A
clock supply with ±100ppm frequency accuracy is suggested. A buffered version of this clock is provided
on the SDCLKO pin for the operation of the SDRAM. A divided and buffered version of this clock is
provided on REF_CLKO for the RMII/MII interface.
•
Packet Interface Reference clock (REF_CLK) input that can be 25MHz or 50MHz. This clock is used as
the timing reference for the RMII/MII interface. The user can utilize the built-in REF_CLKO output clock to
drive this input.
•
The Transmit and Receive clocks for the MII Interface (TX_CLK and RX_CLK). In DTE mode, these are
input pins and accept clocks provided by an Ethernet PHY. In the DCE mode, these are output pins and
will output an internally generated clock to the Ethernet PHY. The output clocks are generated by internal
division of REF_CLK. In RMII mode, only the REF_CLK input is used.
•
REF_CLKO is an output clock that is generated by dividing the 100MHz System clock (SYSCLKI) by 2 or
4. This output clock can be used as an input to REF_CLK, allowing the user to have one less oscillator for
the system.
•
A Management Data Clock (MDC) output is derived from SYSCLKI and is used for information transfer
between the internal Ethernet MAC and external PHY. The MDC clock frequency is 1.67MHz.
The following table provides the different clocking options for the Ethernet interface.
Table 9-1. Clocking Options for the Ethernet Interface
RMIIMIIS
Pin
Speed
DCE/
DTE
REF_CLKO
Output
0 (MII)
10Mbps
DTE
25MHz
0 (MII)
10Mbps
DCE
25MHz
0 (MII)
100Mbps
DCE
25MHz
1 (RMII)
10Mbps
—
50MHz
1 (RMII)
100Mbps
—
50MHz
REF_CLK
Input
25MHz
±100ppm
25MHz
±100ppm
25MHz
±100ppm
50MHz
±100ppm
50MHz
±100ppm
37 of 333
MDC
Output
RX_CLK
TX_CLK
Input from
PHY
2.5MHz
(Output)
25MHz
(Output)
Input from
PHY
2.5MHz
(Output)
25MHz
(Output)
1.67MHz
Not Applicable
Not Applicable
1.67MHz
Not Applicable
Not Applicable
1.67MHz
1.67MHz
1.67MHz
38 of 333
ETHERNET MAC
ARBITER
JTCLK1
BERT
ETHERNET
MAPPER
CIR
CONTROLLER
PACKET
HDLC/X.86
TRANSMIT
SERIAL
PORT
TRANSMIT
FRAMER
CLAD
SDCLK
JTAG2
PACKET
HDLC/X.86
HDLC
RECEIVE
SERIAL
PORT
BERT
T1/E1/J1
TRANSCEIVER
HDLC
RCLKI
RBSYNC
MUX
RECEIVIE
FRAMER
MUX
RSYSCLK
RCHBLK
RCHCLK
RCLKO
RRING
RDCLKO
RTIP
TRANSMIT
LIU
TRING
RECEIVE
LIU
TTIP
JTCLK2
TCLKE
TBSYNC
TSYSCLK
TCHBLK
TCHCLK
TCLKT
TDCLKO
MCLK1, 2
XTALD
8XCLK
BPCLK
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
Figure 9-1. Clocking for the DS33R41
µP Port
CLAD
SYSCLKI
REF_CLKO
RX_CLK
JTAG1
SDRAM PORT
REF_CLK
TX_CLK
MDC
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
9.1.1
Serial Interface Clock Modes
The Serial Interface timing is determined by the line clocks. 8.192MHz is the required clock rate for interfacing the
IBO bus to Dallas Semiconductor Framers and Single-Chip Transceivers. Both the transmit and receive clocks
(TCLKE and RCLKI) are inputs.
9.1.2
Ethernet Interface Clock Modes
The Ethernet PHY interface has several different clocking requirements, depending on the mode of operation. The
user has the option of using the internally generated REF_CLKO output to simplify the system design. Table 9-1
outlines the possible clocking modes for the Ethernet Interface. The buffered REF_CLKO output is generated by
division of the 100MHz system clock input by the user on SYSCLKI. The frequency of the REF_CLKO pin is
automatically determined by the DS33R41 based on the state of the RMIIMIIS pin. The REF_CLKO output can be
used as a REF_CLK for the Ethernet Interface by connecting REF_CLKO to REF_CLK. The REF_CLKO function
can be turned off with the GL.CR1.RFOO bit.
In RMII mode, receive and transmit timing is always synchronous to a 50MHz clock input on the REF_CLK pin.
The source of REF_CLK is expected to be the external PHY. The user has the option of using the 50MHz
REF_CLKO output as the timing source for the PHY. More information on RMII mode can be found in Section
9.13.2.
While using MII mode with DTE operation, the MII clocks (RX_CLK and TX_CLK) are inputs that are expected to
be provided by the external PHY. While using MII mode with DCE operation, the MII clocks (TX_CLK and
RX_CLK) are output by the DS33R41, and are derived from the 25MHz REF_CLK input. Any 25MHz reference
may be used, but the user may choose to use the REF_CLKO output to avoid adding another system clock. More
information on MII mode can be found in Section 9.13.1.
39 of 333
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
9.2
Resets and Low-Power Modes
The external RST pin and the global reset bit in GL.CR1 create an internal global reset signal. The global reset
signal resets the status and control registers on the chip (except the GL.CR1. RST bit) to their default values and
resets all the other flops to their reset values. The processor bus output signals are also placed in high-impedance
mode when the RST pin is active (low). The global reset bit (GL.CR1. RST) stays set after a one is written to it, but
is reset to zero when the external RST pin is active or when a zero is written to it. Allow 5ms after initiating a reset
condition for the reset operation to complete.
The Serial Interface reset bit in LI.RSTPD resets all the status and control registers on the Serial Interface to their
default values, except for the LI.RSTPD.RST bit. The Serial Interface includes the HDLC encoder/decoder, X86
encoder and decoder and the corresponding serial port. The Serial Interface reset bit (LI.RSTPD.RST) stays set
after a one is written to it, but is reset to zero when the global reset signal is active or when a zero is written to it.
Table 9-2. Reset Functions
RESET FUNCTION
LOCATION
COMMENTS
Hardware Device Reset
RST Pin
Transition to a logic 0 level resets the
device.
Hardware JTAG Reset
JTRST1 Pin
Resets the JTAG test port.
Global Software Reset
GL.CR1
Writing to this bit resets the device.
Serial interface Reset
LI.RSTPD
Writing to this bit resets a Serial
Interface.
Queue Pointer Reset
GL.C1QPR
Writing to this bit resets the Queue
Pointers
There are several features in the device to reduce power consumption. The reset bit in the LI.RSTPD register also
places the Serial interface in a low-power mode. Additionally, the RST pin may be held low indefinitely to keep the
entire device in a low-power mode. Note that exiting the low-power condition requires re-initialization and
configuration.
40 of 333
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
9.3
Initialization and Configuration
EXAMPLE DEVICE INITIALIZATION SEQUENCE:
STEP 1: Apply 3.3V supplies, then apply 1.8V supplies.
STEP 2: Reset the device by pulling the RST pin low or by using the software reset bits outlined in Section 9.2.
Clear all reset bits. Allow 5ms for the reset recovery.
STEP 3: Reset the integrated T1/E1/J1 Transceivers through hardware using the TSTRST pin or through software
using the SFTRST function in the master mode register.
STEP 4: The LIRST (TR.LIC2.6) should be toggled from 0 to 1 to reset the line interface circuitry. Allow 40ms for
the reset recovery.
STEP 5: Check the Ethernet Mapper Device ID in the GL.IDRL and GL.IDRH registers.
STEP 6: Check the T1/E1/J1 Transceiver Device ID in the TR.IDR register.
STEP 7: Configure the system clocks. Allow the clock system to properly adjust.
STEP 8: Initialize the entire remainder of the register space with 00h (or otherwise if specifically noted in the
register’s definition), including the reserved bits and reserved register locations.
STEP 9: Write FFFFFFFFh to the MAC indirect addresses 010Ch through 010Fh.
STEP 10: Setup connection in the GL.CON1 register.
STEP 11: Configure the Serial Port register space as needed.
STEP 12: Configure the Ethernet Port register space as needed.
STEP 13: Configure the Ethernet MAC indirect registers as needed.
STEP 14: Configure the T1/E1/J1 Framer as needed.
STEP 15: Configure the T1/E1/J1 LIU as needed.
STEP 16: Configure the external Ethernet PHY through the MDIO interface.
STEP 17: Enable the elastic store on each of the integrated T1/E1 transceivers.
STEP 18: Configure each T1/E1 transceiver’s position on the IBO bus through TR.IBOC.
STEP 19: Choose a T1/E1 transceiver to as the 8kHz frame sync source, and configure its RSYNC as an output.
STEP 20: Clear all counters and latched status bits.
STEP 21: Set Queue sizes in the Arbiter and reset the queue pointers for the Ethernet and serial interfaces.
STEP 22: After the TSYSCLK and RSYSCLK inputs to the T1/E1/J1 transceivers are stable, the receive and
transmit elastic stores should be reset.
STEP 23: Enable Interrupts as needed.
STEP 24: Initiate link aggregation as discussed in Section 9.8.
STEP 25: Begin handling interrupts and latched status events.
41 of 333
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
9.4
Global Resources
In order to maintain software compatibility with the multiport devices in the product family, a set of Global registers
are located at 0F0h-0FFh. The global registers include Global resets, global interrupt status, interrupt masking,
clock configuration, and the Device ID registers. See the Global Register Definitions in Table 12-2.
9.5
Per-Port Resources
Multi-port devices in this product family share a common set of global registers and Arbiter. All other resources are
per-port.
9.6
Device Interrupts
Figure 9-2 diagrams the flow of interrupt conditions from their source status bits through the multiple levels of
information registers and mask bits to the interrupt pin. When an interrupt occurs, the host can read the Global
Latched Status registers GL.LIS, GL.SIS, GL.IBIS, GL.TRQIS, GL.IMXSLS, GL.IMXDFDELS, and GL.IMXOOFLS
to initially determine the source of the interrupt. The host can then read the LI.TQCTLS, LI.TPPSRL, LI.RPPSRL,
LI.RX86S, SU.QCRLS, and BSRL registers to further identify the source of the interrupt(s). In order to maintain
software compatibility with the multiport devices in the product family, the global interrupt status and interrupt
enable registers have been preserved, but do not need to be used. If GL.TRQIS is determined to be the interrupt
source, the host will then read the LI.TPPSRL and LI.RPPSRL registers for the cause of the interrupt. If GL.LIS is
determined to be the interrupt source, the host will then read the LI.TQCTLS, LI.TPPSRL, LI.RPPSRL, and
LI.RX86S registers for the source of the interrupt. If GL.SIS is the source, the host will then read the SU.QCRLS
register for the source of the interrupt. If GL.IBIS is the source, the host will then read the BSRL register for the
source of the interrupt. All Global Interrupt Status Register bits are real-time bits that will clear once the appropriate
interrupt has been serviced and cleared, as long as no additional, enabled interrupt conditions are present in the
associated status register. All Latched Status bits must be cleared by the host writing a “1” to the bit location of the
interrupt condition that has been serviced. In order for individual status conditions to transmit their status to the
next level of interrupt logic, they must be enabled by placing a “1” in the associated bit location of the correct
Interrupt Enable Register. The Interrupt enable registers are LI.TPPSRIE, LI.RPPSRIE, LI.RX86LSIE, BSRIE,
SU.QRIE, GL.LIE, GL.SIE, GL.IBIE, GL.TRQIE, GL.IMXSIE, GL.IMXDFEIE, and GL.IMXOOFIE. Latched Status
bits that have been enabled via Interrupt Enable registers are allowed to pass their interrupt conditions to the
Global Interrupt Status Registers. The Interrupt enable registers allow individual Latched Status conditions to
generate an interrupt, but when set to zero, they do not prevent the Latched Status bits from being set. Therefore,
when servicing interrupts, the user should AND the Latched Status with the associated Interrupt Enable Register in
order to exclude bits for which the user wished to prevent interrupt service. This architecture allows the application
host to periodically poll the latched status bits for non-interrupt conditions, while using only one set of registers.
Note the bit-orders of SU.QRIE and SU.QCRLS are different.
Note that the inactive state of the interrupt output pin is configurable. The INTM bit in GL.CR1 controls the inactive
state of the interrupt pin, allowing selection of a pull-up resistor or active driver.
The interrupt structure is designed to efficiently guide the user to the source of an enabled interrupt source. The
latched status bits for the interrupting entity must be read to clear the interrupt. Also reading the latched status bit
will reset all bits in that register. During a reset condition, interrupts cannot be generated. The interrupts from any
source can be blocked at a global level by the placing a zero in the global interrupt enable registers (GL.LIE,
GL.SIE, GL.IBIE, GL.TRQIE, GL.IMXSIE, GL.IMXDFEIE, and GL.IMXOOFIE). Reading the Latched Status bit for
all interrupt generating events will clear the interrupt status bit and Interrupt signal will be deasserted.
42 of 333
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
<Reserved>
<Reserved>
<Reserved>
SAPI High is not equal to LI.TRX86SAPIH
SAPI Low is not equal to LI.TRX86SAPIL
Control is not equal to LI.TRX8C
Address is not equal to LI.TRX86A
<Reserved>
<Reserved>
<Reserved>
<Reserved>
Transmit Queue FIFO Overflowed
Transmit Queue Overflow
Transmit Queue for Connection Exceeded High
Threshold
0
<Reserved>
7
6
5
4
3
2
1
0
SU.QCRLS
SU.QRIE
7
6
5
4
3
2
1
0
BSRIE
7
6
5
4
3
2
1
BSRL
Transmit Queue for Connection Exceeded Low Threshold
7
6
5
4
3
2
1
0
<Reserved>
<Reserved>
<Reserved>
Receive Queue FIFO Overflowed
Receive Queue Overflow
Receive Queue for Connection Exceeded Low Threshold
Receive Queue for Connection Exceeded High Threshold
<Reserved>
<Reserved>
<Reserved>
<Reserved>
Performance Monitor Update
Bit Error Detected
Bit Error Count
Out Of Synchronization
43 of 333
Interrupt Pin
<Reserved>
7
6
5
4
3
2
1
0
7
6
5
4
3
2
1
0
7
6
5
4
3
2
1
0
7
6
5
4
3
2
1
0
Interrupts from
T1/E1/J1 Transceivers
Transmit Errored Packet Insertion Finished
GL.TRQIE
<Reserved>
GL.LIE
<Reserved>
GL.SIE
<Reserved>
Register Name
GL.BIE
<Reserved>
Interrupt
Enable
Registers
GL.TRQIS
<Reserved>
Register Name
GL.LIS
<Reserved>
7
6
5
4
3
2
1
0
Interrupt Status
Registers
GL.SIS
<Reserved>
Drawing Legend:
GL.BIS
Receive Size Violation Packet Count
LI.RPPSRIE
Receive Aborted Packet Count
LI.TPPSRIE
Receive FCS Errored Packet Count
LI.RX86LSIE
Receive Large Packet Detected
LI.TQTIE
Receive Small Packet Detected
LI.TPPSRL
Receive Invalid Packet Detected
7
6
5
4
3
2
1
0
LI.RX86S
Receive Aborted Packet
LI.TQCTLS
Receive FCS Errored Packet
LI.RPPSL
Figure 9-2. Device Interrupt Information Flow Diagram
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
9.7
Serial Interface
The Serial Interface consists of physical serial port, IMUX/IBO Formatter, and HDLC/X.86 engine. The Serial
Interface supports time-division multiplexed serial data, in a format compatible with Dallas Semiconductor’s
8.192Mbps Channel Interleaved Bus Operation (IBO). The Serial Interface receives and transmits the
encapsulated Ethernet packets. The physical interface consists of Transmit Data, Transmit Clock, Transmit
Synchronization, Receive Data, Receive Clock, and Receive Synchronization. The Serial Interface can be
seamlessly connected to the IBO bus of the four integrated Single-Chip Transceivers (SCTs).
9.8
•
Byte-aligned data is always input through the RSERI pin at a rate of 8.192Mbps. RSYNC is an 8kHz
reference input used to determine the position of channel 1 for the first T1/E1 link. Note that if the
device is configured to use less than four T1/E1 links, the time slots on the RSERI input to the Ethernet
Mapper associated with the unused links must be all 1s.
•
Data on the IBO bus is byte-interleaved (by channel) for up to 4 T1/E1 interfaces, and is “byte-striped”
across the available links. The Channel 1 byte arrives (MSB first) for all four T1/E1 links, followed by
the Channel 2 byte for all four T1/E1 links, etc.
•
Channel 1 is never used for data. In T1 mode, channels 5, 9, 13, 17, 21, 25, 29 are also not used for
data. Bytes for all unused timeslots will be replaced with FFh. All four TDM links must be configured for
T1 operation, or all 4 links must be configured for E1 operation.
•
Channel 2 is a reserved for link management and coordination. This timeslot is used for inter-node
communication to initiate, control, and monitor the IMUX function. The IMUX operation is initiated with
a handshaking procedure and if successful, followed by a data phase. There is no data transfer during
the handshaking phase. During data transfer, channel 2 is used to provide frame sequence numbers.
The receiver uses the sequence numbers (0-63) to reassemble the frames to compensate for a
differential delay of up to 7.75ms. If the differential delay exceeds 7.75ms, packet errors will occur.
•
Byte-aligned data is output on the TSERO pin at a rate of 8.192Mbps. TSYNC is used as an 8kHz
synchronization for the TSERO data and is used to determine the position of channel 1 for the first
T1/E1 link. If the device is configured to use less than four T1/E1 links, data bytes on TSERO
associated with the unused links are set to FFh.
Link Aggregation (IMUX)
The DS33R41 has a link aggregation feature that allows data from the Ethernet interface to be inverse-multiplexed
over up to four aggregated T1/E1 links. The T1/E1 data streams are input and output from the device on an
8.192Mbps Interleaved Bus (IBO). The IMUX function is shown graphically in Figure 9-3 and Figure 9-4.
44 of 333
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
Figure 9-3. IMUX Interface to T1/E1 Transceivers
T1E1
T1E1
LIU
Framer
Tser
T1E1
T1E1
T1E1
LIU
Tsync
Framer
LIU
Framer
LIU
Framer
I
B
O
H
D
L
C
Line 1
IMUX
Rser
Arbiter
Ethernet Port
Rsync
T1E1
SDRAM
Interface
Figure 9-4. Diagram of Data Transmission with IMUX Operation
From TSERO
. . . 128 Byte Sequence 02 128 Byte Sequence 01
FRAMER IBO
Sequence 02
Data on IBO Bus
Sequence 01
L1 32 L1 31 . . . L1 04 L1 03 s02 xxxx L1 32 L1 31 . . . L1 04 L1 03 s01 xxxx T1/E1 1
L2 32 L2 31 . . . L2 04 L2 03 s02 xxxx L2 32 L2 31 . . . L2 04 L2 03 s01 xxxx T1/E1 2
L3 32 L3 31 . . . L3 04 L3 03 s02 xxxx L3 32 L3 31 . . . L3 04 L3 03 s01 xxxx T1/E1 3
L4 32 L4 31 . . . L4 04 L4 03 s02 xxxx L4 32 L4 31 . . . L4 04 L4 03 s01 xxxx T1/E1 4
Sequence
Numbers
Signaling
Channel
Byte Sequence Detail
. . . L4 04 L3 04 L2 04 L1 04 L4 03 L3 03 L2 03 L1 03 s01
Encapsulated L4 32 L3 32 L2 32 L1 32 L4 31 L3 31 L2 31 L1 31
. . . N+7 N+6 N+5 N+4 N+3 N+2 N+1
N
Packet Byte: N+120 N+119 . . .
s01
s01
s01 xxxx xxxx xxxx xxxx
TSYNC:
Time
45 of 333
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
9.8.1
Microprocessor Requirements
Link aggregation requires an external host microprocessor to issue instructions and to monitor the IMUX function of
the device. The host microprocessor is responsible for the following tasks to open a transmit channel:
•
Configuring GL.IMXCN to control the links participating in the aggregation.
•
Issuing a link start command through GL.IMXC.
•
Monitoring the ITSYNC1-4 status from GL.IMXSS or GL.IMXSLS.
•
Monitoring GL.IMXDFDELS.IDDELS0 to ensure that differential delay is not larger than 7.75ms.
•
Setting GL.IMXCN.SENDE to begin transmitting data after all links are synchronized.
•
Resetting the queue pointers in GL.C1QPR.
•
Monitoring the TOOFLS1-4 status from GL.IMXOOFLS to restart handshaking procedure if needed.
The host microprocessor is also responsible for the following tasks to open a receive channel:
•
Monitoring the status of IRSYNC1-4 and setting GL.IMXCN.RXE to receive data.
When in the data phase, if any of the links are detected to be out of frame (OOF), data will be corrupted. The link
initialization procedure must be initiated again. Note that the serial HDLC or X.86 encoded data is sent on 4 T1/E1
links, each link will not have separate HDLC/X.86 encoded data. The HDLC/X.86 encoding and decoding is data is
only available when the device has performed IMUX function. Hence on the line the FCS for a given HDLC packet
could transport on a separate link than the HDLC data.
46 of 333
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
9.8.2
IMUX Command Protocol
The format for all commands sent and received in Channel 2 of the IBO Serial Interface is shown in Figure 9-5.
The MSB for all commands is a “1.” The next 6 bits contain the actual opcode for the command. The LSB is the
even parity calculation for the byte. These commands will be sent and received on Channel 2 of each of the T1/E1
interleaved IBO data. The commands that are possible are outlined in Table 9-3. Note that the 4 portions of the
IMUX link are separate and the Channel 2 for each link will send and receive commands specific to that link. The
microprocessor can disable links that are not to be aggregated.
Figure 9-5. Command Structure for IMUX Function
M
S
B
L
S
B
Command
Even
Parity
"1"
Table 9-3. Commands Sent and Received on the IMUX Links
Command Name
Command Byte
(P is even parity)
Transmit /
Receive
Comments
Link Start
1000 001P
Tx or Rx
Initiate the link. The receiver will then search for 3
consecutive sequence numbers.
Sequence
1sss 010P
Tx or Rx
“sss” contains the frame sequence number for
packet segmentation and reassembly.
Rsync
1000 011P
Tx or Rx
This command is sent to indicate to the distant
node that link synchronization has been achieved.
OOF
1000 100P
Tx or Rx
The transmitting device has detected an out of
frame condition.
Nop
1111 111P
Tx or Rx
No operation.
47 of 333
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
The command and status registers for the IMUX function are detailed below:
Table 9-4. Command and Status for the IMUX for Processor Communication
Register
Name
Comments
IMUX Configuration Register
GL.IMXCN
Used to configure the number of links
participating and select T1 or E1.
IMUX Command Register
GL.IMXC
Used to issue commands for link
management
IMUX Sync Status Register
GL.IMXSS
Provides the real time sync status of
the 4 transmit and receive links
IMUX Sync Latched Status Register
GL.IMXSLS
Latched status register for the IMXSS
register.
IMUX Interrupt Mask Register
GL.IMXSIE
Interrupt enable bits for Sync Latched
Status bits
Differential Delay Register
GL.IMXDFD
Provides the largest differential delay
value for the receive path. Measured
only at link initialization.
Differential Delay Error Interrupt
Enable Register
GL.IMXDFEIE
Interrupt enable for the differential
delay register.
Differential Delay Latched Status
Register
GL.IMXDFDELS
Latched Status for GL.IMXDFD. Note
that differential delay is measured only
at link initiation.
OOF Interrupt Enable
GL.IMXOOFIE
Interrupt enable for the IMXOOFLS
register.
OOF Latched Status Register
GL.IMXOOFLS
Indicates out of frame conditions for
both ends of the communication. If
detected, the user must re-initiate all
links.
48 of 333
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
9.8.3
Out of Frame (OOF) Monitoring
Once the links are in synchronization, frame synchronization monitoring is started. The device will declare an out of
frame (OOF) if 2 consecutive sequence errors are received. The device automatically adjusts for single-frame slips
by increasing or decreasing the expected frame sequence number. If a frame sequence number is neither
repeated nor skipped by one (indicating a single-frame slip), it is considered a sequence error. Two consecutive
frames with sequence errors result in an OOF state being declared. The OOF state is used to set OOF Latched
bits in GL.IMXOOFLS and an OOF command is sent to the distant end. If an OOF command is received from the
distant end, the latched status register will be updated.
9.8.4
Data Transfer
Once synchronization is established, data transfer is enabled by the microprocessor setting the GL.IMXCN.RXE
and GL.IMXCN.SENDE bits. The user must then reset the queue pointers (GL.C1QPR) for proper data transfer.
Data is byte-striped across the available links.
49 of 333
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
9.9
Connections and Queues
The multi-port devices in this product family provide bi-directional cross-connections between the multiple Ethernet
ports and Serial ports when operating in software mode. A single connection is preserved in this single-port device
to provide software compatibility with multi-port devices. The connection will have an associated transmit and
receive queue. Note that the terms “Transmit Queue” and “Receive Queue” are with respect to the Ethernet
Interface. The Receive queue is for data arriving from Ethernet interface to be transmitted to the WAN interface.
The Transmit queue is for data arriving from the WAN to be transmitted to the Ethernet interface. Hence the
transmit and receive direction terminology is the same as is used for the Ethernet MAC port.
The user can define the connection and the size of the transmit and receive queues. The size is adjustable in units
of 32(by 2048 byte) packets. The external SDRAM can hold up to 8192 packets of data. The user must ensure that
all the connection queues do no exceed this limit. The user also must ensure that the transmit and receive queues
do not overlap each other. Unidirectional connections are not supported.
When the user changes the queue sizes, the connection must be torn down and re-established. When a
connection is disconnected all transmit and receive queues associated with the connection are flushed and a “1’ is
sourced towards the Serial transmit and the HDLC receiver. The clocks to the HDLC are sourced a “0”.
The user can also program High and Low watermarks. If the queue size grows past the High watermark, an
interrupt is generated if enabled. The registers of relevance are described in Table 9-5. Registers related to
Connections and Queues. The AR.TQSC1 size provides the size of the transmit queue for the connection. The
High Watermark will set a latched status bit. The latched status bit will clear when the register is read. The status
bit is indicated by LI.TQCTLS.TQHTS. Interrupts can be enabled on the latched bit events by LI.TQTIE. A latched
status bit (LI.TQCTLS.TQLTS) is also set when the queue crosses a low watermark.
The Receive Queue functions in a similar manner. Note that the user must ensure that sizes and watermarks are
set in accordance with the configuration speed of the Ethernet and Serial interfaces. The device does not provide
error indication if the user creates a connection and queue that overwrites data for another connection queue. The
user must take care in setting the queue sizes and watermarks. The registers of relevance are AR.RQSC1and
SU.QCRLS. Queue size should never be set to 0.
50 of 333
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
It is recommended that the user reset the queue pointers for the connection after disconnection. The pointers must
be reset before a connection is made. If this disconnect/connect procedure is not followed, incorrect data may be
transmitted. The proper procedure for setting up a connection follows:
•
Set up the queue sizes for both transmit and receive queue (AR.TQSC1 and AR.RQSC1).
•
Set up the high/low thresholds and interrupt enables if desired (GL.TRQIE, LI.TQTIE, SU.QRIE)
•
Reset all the pointers for the connection desired (GL.C1QPR)
•
Set up the connections (GL.CON1)
•
If a connection is disconnected, reset the queue pointers after the disconnection.
Table 9-5. Registers related to Connections and Queues
Register
GL.CON1
Enables connection between the Ethernet Interface and the Serial Interface.
Note that once connection is set up, then the queues and thresholds can be
setup for that connection.
AR.TQSC1
Size for the Transmit Queue in Number of 32—2K packets.
AR.RQSC1
Size for the Receive Queue in Number of 32—2K packets.
GL.TRQIE
Interrupt enable for items related to the connections at the global level
GL.TRQIS
Interrupt enable status for items related to the connections at the global level
LI.TQTIE
Enables for the Transmit queue crossing high and low thresholds
LI.TQCTLS
Latched status bits for connection high and low thresholds for the transmit
queue.
SU.QRIE
Enables for the receive queue crossing high and low thresholds
SU.QCRLS
Latched status bits for receive queue high and low thresholds.
GL.C1QPR
Resets the connection pointer.
9.10 Arbiter
The Arbiter manages the transport between the Ethernet port and the Serial port. It is responsible for queuing and
dequeuing packets to a single external SDRAM. The arbiter handles requests from the HDLC and MAC to transfer
data to and from the SDRAM.
51 of 333
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
9.11 Flow Control
Flow control may be required to ensure that data queues do not overflow and packets are not lost. The device
allows for optional flow control based on the queue high watermark or through host processor intervention. There
are 2 basic mechanisms that are used for flow control:
•
In half duplex mode, a jam sequence is sent that causes collisions at the far end. The collisions cause the
transmitting node to reduce the rate of transmission.
•
In full duplex mode, flow control is initiated by the receiving node sending a pause frame. The pause frame
has a timer parameter that determines the pause timeout to be used by the transmitting node.
Note that the terms “transmit queue” and “receive queue” are with respect to the Ethernet Interface. The Receive
Queue is the queue for the data that arrives on the MII/RMII interface, is processed by the MAC and stored in the
SDRAM. Transmit queue is for data that arrives from the Serial port, is processed by the HDLC and stored in the
SDRAM to be sent to the MAC transmitter.
The following flow control options are possible:
•
Automatic flow control can be enabled in software mode with the SU.GCR.ATFLOW bit. Note that the user
does not have control over SU.MACFCR.FCE and FCB bits if ATFLOW is set. The mechanism of sending
pause or jam is dependent only on the receive queue high threshold.
•
Manual flow control can be performed through software when SU.GCR.ATFLOW=0. The host processor
must monitor the receive queues and generate pause frames (full duplex) and/or jam bytes through the
SU.MACFCR.FCB, SU.GCR.JAME, and SU.MACFCR FCE bits.
Note that in order to use flow control, the receive queue size (in AR.RQSC1) must be 02h or greater. The receive
queue high threshold (in SU.RQHT) must be set to 01h or greater, but must be less than the queue size. If the high
threshold is set to the same value as the queue size, automatic flow control will not be effective. The high threshold
must always be set to less than the corresponding queue size.
The following table provides all of the flow control options for the device.
Table 9-6. Options for Flow Control
MODE
Half Duplex; Manual
Flow Control
Half Duplex; Automatic
Flow Control
Full Duplex; Manual
Flow Control
Full Duplex; Automatic
Flow Control
0
1
0
1
Controlled By User
Controlled Automatically
N/A
N/A
FCB Bit
(Pause)
NA
NA
Controlled by User
Controlled Automatically
FCE Bit
Controlled by User
Controlled Automatically
Controlled by User
Controlled Automatically
N/A
N/A
Programmed by User
Programmed by User
Configuration
ATFLOW Bit
JAME Bit
Pause Timer
9.11.1 Full Duplex Flow control
Automatic flow control is enabled by default. The host processor can disable this functionality with
SU.GCR.ATFLOW. The flow control mechanism is governed by the high watermarks (SU.RQHT). The SU.RQLT
low threshold can be used as indication that the network congestion is clearing up. The value of SU.RQLT does
not affect the flow control. When the connection queue high threshold is exceeded the device will send a pause
52 of 333
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
frame with the timer value programmed by the user. See Table 9-8. MAC Control Registers for more information. It
is recommended that 80 slots (80 by 64 bytes or 5120 bytes) be used as the standard timer value.
The pause frame causes the distant transmitter to “pause for a time” before starting transmission again. The pause
command has a multicast address 01-80-62-00-00-01. The high and low thresholds for the receive queue are
configurable by the user but it is recommended that the high threshold be set approximately 96 packets from the
maximum size of the queue and the low threshold 96 packets lower than the high threshold. The device will send a
pause frame as the queue has crossed the high threshold and a frame is received. Pause is sent every time a
frame is received in the “high threshold state”. Pause control will only take care of temporary congestion. Pause
control does not take care of systems where the traffic throughput is too high for the queue sizes selected. If the
flow control is not effective the receive queue will eventually overflow. This is indicated by SU.QCRLS.RQOVFL
latched bit. If the receive queue is overflowed any new frames will not be received.
The user has the option of not enabling automatic flow control. In this case the thresholds and corresponding
interrupt mechanism to send pause frame by writing to flow control busy bit in the MAC flow control registers
SU.MACFCR.FCB, SU.GCR.JAME, and SU.MACFCR. This allows the user to set not only the watermarks but also
to decide when to send a pause frame or not based on watermark crossings.
On the receive side the user has control over whether to respond to the pause frame sent by the distant end (PCF
bit). Note that if automatic flow control is enabled the user cannot modify the FCE bit in the MAC flow control
register. On the Transmit queue the user has the option of setting high and low thresholds and corresponding
interrupts. There is no automatic flow control mechanism for data received from the Serial side waiting for
transmission over the Ethernet interface during times of heavy Ethernet congestion.
Figure 9-6. Flow Control Using Pause Control Frame
8
Receive Queue Low
Water
Rx
Data
Receive Queue
Growth
Receive Queue High
Water Mark
Initiate Flow control
53 of 333
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
9.11.2 Half Duplex Flow control
Half duplex flow control uses a jamming sequence to exert backpressure on the transmitting node. The receiving
node jams the first 4 bytes of a packet that are received from the MAC in order to cause collisions at the distant
end. In both 100Mbps and 10Mbps MII/RMII modes, 4 bytes are jammed upon reception of a new frame. Note that
the jamming mechanism does not jam the current frame that is being received during the watermark crossing, but
will wait to jam the next frame after the SU.RQHT bit is set. If the queue remains above the high threshold,
received frames will continue to be jammed. This jam sequence is stopped when the queue falls below the high
threshold.
9.11.3 Host-Managed Flow control
Although automatic flow control is recommended, flow control by the host processor is also possible. By utilizing
the high watermark interrupts, the host processor can manually issue pause frames or jam incoming packets to
exert backpressure on the transmitting node. Pause frames can be initiated with SU.MACFCR.FCB bit. Jam
sequences can be initiated be setting SU.GCR.JAME. The host can detect pause frames by monitoring
SU.RFSB3.UF and SU.RFSB3.CF. Jammed frames will be indistinguishable from packet collisions.
54 of 333
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
9.12 Ethernet Interface Port
The Ethernet port interface allows for direct connection to an Ethernet PHY. The interface consists of a
10/100Mbps MII/RMII interface and an Ethernet MAC. In RMII operation, the interface contains seven signals with
a reference clock of 50MHz. In MII operation, the interface contains 17 signals and a clock reference of 25MHz.
The device can be configured to RMII or MII interface by the Hardware pin RMIIMIIS. The REF_CLKO output can
be used to source the REF_CLK input. If the port is configured for MII in DCE mode, REF_CLK must be 25MHz.
The device will internally generate the TX_CLK and RX_CLK outputs (at 25MHz for 100Mbps, 2.5MHz for 10Mbps)
required for DCE mode from the REF_CLK input. In MII mode with DTE operation, the TX_CLK and RX_CLK
signals are generated by the PHY and are inputs to the device. For more information on clocking the Ethernet
Interface, see Section 9.1.2.
The data received from the MII or RMII interface is processed by the internal IEEE 802.3-complaint Ethernet MAC.
The user can select the maximum frame size (up to 2016 bytes) that is received with the SU.RMFSRH and
SU.RMFSRL registers. The maximum frame length (in bits) is the number specified in SU.RMFSRH and
SU.RMFSRL multiplied by 8. Any programmed value greater than 2016 bytes will result in unpredictable
behavior and should be avoided. The maximum frame size is shown in Figure 9-7. The length includes only
destination address, source address, VLAN tag (2 bytes), type length field, data and CRC32. The frame size is
different than the 802.3 “type length field”.
Frames coming from the Ethernet PHY or received from the packet processor are rejected if greater than the
maximum frame size specified. Each Ethernet frame sent or received generates status bits (SU.TFSH and
SU.TFSL and SU.RFSB0 to SU.RFSB3). These are real time status registers and will change as each frame is
sent or received. Hence they are useful to the user only when one frame is sent or received and the status is
associated with the frame sent or received.
Figure 9-7. IEEE 802.3 Ethernet Frame
Preamble
SFD
Destination Adrs
Source Address
Type
Length
Data
CRC32
7
1
6
6
2
46-1500
4
Max Frame Length
The distant end will normally reject the sent frames if jabber timeout, loss of carrier, excessive deferral, late
collisions, excessive collisions, under run, deferred or collision errors occur. Transmission of a frame under any of
theses errors will generate a status bit in SU.TFSL, SU.TFSH. The device provides user the option to automatically
retransmit the frame if any of the errors have occurred through the bit settings in SU.TFRC. Deferred frames and
heartbeat fail have separate resend control bits (SU.TFRC.TFBFCB and SU.TFRC.TPRHBC). If there is no carrier
(indicated by the MAC Transmit Packet Status), the transmit queue (data from the Serial Interface to the SDRAM to
Ethernet Interface) can be selectively flushed. This is controlled by SU.TFRC.NCFQ.
The MAC circuitry generates a frame status for every frame that is received. This real time status can be read by
SU.RFSB0 to SU.RFSB3. Note the frame status is the “real time” status and hence the value will change as new
frames are received. Hence the real time status reflects the status in time and may not correspond to the current
received frame being processed. This is also true for the transmitted frames.
55 of 333
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
Frames with errors are usually rejected by the device. The user has the option of accepting frames by settings in
Receive Frame Rejection Control register (SU.RFRC). The user can program whether to reject or accept frames
with the following errors:
•
MII error asserted during the reception of the frame
•
Dribbling bits occurred in the frame
•
CRC error occurred
•
Length error occurred—the length indicated by the frame length is inconsistent with the number of bytes
received
•
Control frame was received. The mode must be full duplex
•
Unsupported control frame was received
Note that frames received that are runt frames or frames with collision will automatically be rejected.
Table 9-7. Registers Related to the Ethernet Port
Register
Function
SU.TFRC
This register determines if the current frame is retransmitted due to various
transmit errors
SU.TFSL and SU.TFSH
These 2 registers provide the real time status of the transmit frame. Only apply
to the last frame transmitted.
SU.RFSB0 to 3
These registers provide the real time status for the received frame. Only apply
to the last frame received.
SU.RFRC
This register provides settings for reception or rejection of frame based on
errors detected by the MAC.
SU.RMFSRH and SU.RMFSRL
The settings for this register provide the maximum size of frames to be
accepted from the MII/RMII receive interface.
SU.MACCR
This register provides configuration control for the MAC
56 of 333
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
9.12.1 DTE and DCE Mode
The Ethernet MII/RMII port can be configured for DCE or DTE Mode. When the port is configured for the DTE
Mode it can be connected to an Ethernet PHY. In DCE mode, the port can be connected to MII/RMII MAC devices
other than an Ethernet PHY. The DTE/DCE connections for the device in MII mode are shown in the following 2
figures.
In DCE Mode, the transmitter is connected to an external receiver and the receiver is connected to an external
MAC transmitter. The selection of DTE or DCE mode is done by the hardware pin DCEDTES.
Figure 9-8. Configured as DTE Connected to an Ethernet PHY in MII Mode
DS33R41
Rx
Ethernet Phy
RXD[3:0]
DTE
MAC
RXD[3:0]
RXDV
RX_CLK
RXDV
RX_CLK
RX_ERR
RX_ERR
RX_CRS
RX_CRS
COL_DET
COL_DET
TXD[3:0]
TXD[3:0]
TX_CLK
TX_CLK
TX_EN
Rx
DCE
Tx
Tx
TX_EN
MDIO
MDC
57 of 333
MDIO
MDC
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
Figure 9-9. DS33R41 Configured as a DCE in MII Mode
DS33R41
DTE
DCE
Rx
Tx
RXD[3:0]
MAC
Tx
TXD[3:0]
RXDV
RX_CLK
TX_EN
TX_CLK
RX_ERR
TX_ERR
RX_CRS
RX_CRS
COL_DET
COL_DET
TXD[3:0]
RXD[3:0]
TX_CLK
RX_CLK
MAC
Rx
TX_EN
MDIO
MDC
RXDV
MDIO
MDC
9.13 Ethernet MAC
Indirect addressing is required to access the MAC register settings. Writing to the MAC registers requires the
SU.MACWD0-3 registers to be written with 4 bytes of data. The address must be written to SU.MACAWL and
SU.MACAWH. A write command is issued by writing a zero to SU.MACRWC.MCRW and a one to
SU.MACRWC.MCS (MAC command status). MCS is cleared by the device when the operation is complete.
Reading from the MAC registers requires the SU.MACRADH and SU.MACRADL registers to be written with the
address for the read operation. A read command is issued by writing a one to SU.MACRWC.MCRW and a zero to
SU.MACRWC.MCS. SU.MACRWC.MCS is cleared by the device when the operation is complete. After MCS is
clear, valid data is available in SU.MACRD0-SU.MACRD3. Note that only one operation can be initiated (read or
write) at one time. Data cannot be written or read from the MAC registers until the MCS bit has been cleared by the
device. The MAC Registers are detailed in the following table.
58 of 333
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
Table 9-8. MAC Control Registers
Address
Register
0000h-0003h
SU.MACCR
0004h-0007h
SU.MACAH
0008h-000Bh
SU.MACAL
0014h-0017h
SU.MACMIIA
0018h-001Bh
SU.MACMIID
001Ch-001Fh
SU.MACFCR
0100h-0103h
SU.MMCCTRL
Register Description
MAC Control Register. This register is used for
programming full duplex, half duplex, promiscuous mode,
and back-off limit for half duplex. The transmit and receive
enable bits must be set for the MAC to operate.
MAC Address High Register. This provides the physical
address for this MAC.
MAC Address Low Register. This provides the physical
address for this MAC.
MII Address Register. The address for PHY access
through the MDIO interface.
MII Data Register. Data to be written to (or read from) the
PHY through MDIO interface.
Flow Control Register
MMC Control Register bit 0 for resetting the status
counters
Table 9-9. MAC Status Registers
Address
0200h-0203h
0204h-0207h
0300h-0303h
0308h-030Bh
030Ch-030Fh
0334h-0337h
0338h-033Bh
Register
SU.RxFrmCntr
SU.RxFrmOKCtr
SU.TxFrmCtr
SU.TxBytesCtr
SU.TxBytesOkCtr
SU.TxFrmUndr
SU.TxBdFrmsCtr
Register Description
All Frames Received counter
Number of Received Frames that are Good
Number of Frames Transmitted
Number of Bytes Transmitted
Number of Bytes Transmitted with good frames
Transmit FIFO underflow counter
Transmit Number of Frames Aborted
59 of 333
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
9.13.1 MII Mode
The Ethernet interface can be configured for MII operation by setting the hardware pin RMIIMIIS low. The MII
interface consists of 17 pins. For instructions on clocking the Ethernet Interface while in MII mode, see section
9.1.2. Diagrams of system connections for MII operation are shown in Figure 9-8 and Figure 9-9.
9.13.2 RMII Mode
The Ethernet interface can be configured for RMII operation by setting the hardware pin RMIIMIIS high. RMII
interface operates synchronously from the external 50MHz reference (REF_CLK). Only seven signals are
required. The following figure shows the RMII architecture. Note that DCE mode is not supported for RMII mode
and RMII is valid only for full duplex operation.
Figure 9-10. RMII Interface
DS33R41 MAC
External PHY
TXD[1:0]
TX_EN
CRS_DV
RXD[1:0]
REF_CLK
60 of 333
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
9.13.3 PHY MII Management Block and MDIO Interface
The MII Management Block allows for the host to control up to 32 PHYs, each with 32 registers. The MII block
communicates with the external PHY using 2-wire serial interface composed of MDC (serial clock) and MDIO for
data. The MDIO data is valid on the rising edge of the MDC clock. The Frame format for the MII Management
Interface is shown Figure 9-11. The read/write control of the MII Management is accomplished through the indirect
SU.MACMIIA MII Management Address Register and data is passed through the indirect SU.MACMIID Data
Register. These indirect registers are accessed through the MAC Control Registers defined in Table 9-8. The MDC
clock is internally generated and runs at 1.67MHz. Note that the device provides a single MII Management port,
and all control registers for this function are located in MAC 1.
Figure 9-11. MII Management Frame
Preamble
Start
Opco
de
32 bits
2 bits
2 bits
READ
111...111
01
10
WRITE
111...111
01
01
5 bits
Turn
Aroun
d
2 bits
PHYA[4:0]
PHYR[4:0]
ZZ
ZZZZZZZZZ
Z
PHYA[4:0]
PHYR[4:0]
10
PHYD[15:0]
Z
Phy Adrs
5 bits
Phy Reg
61 of 333
Data
Idle
16
bits
1
Bit
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
9.14 Transmit Packet Processor
The Transmit Packet Processor accepts data from the Transmit FIFO performs bit reordering, FCS processing,
packet error insertion, stuffing, packet abort sequence insertion, inter-frame padding, and packet scrambling. The
data output from the Transmit Packet Processor to the Transmit Serial Interface is a serial data stream (bit
synchronous mode). HDLC processing can be disabled (clear channel enable). Disabling HDLC processing
disables FCS processing, packet error insertion, stuffing, packet abort sequence insertion, and inter-frame
padding. Only bit reordering and packet scrambling are not disabled.
Bit reordering changes the bit order of each byte. If bit reordering is disabled, the outgoing 8-bit data stream
DT[1:8] with DT[1] being the MSB and DT[8] being the LSB is output from the Transmit FIFO with the MSB in
TFD[7] (or 15, 23, or 31) and the LSB in TFD[0] (or 8, 16, or 24) of the transmit FIFO data TFD[7:0] 15:8, 23:16, or
31:24). If bit reordering is enabled, the outgoing 8-bit data stream DT[1:8] is output from the Transmit FIFO with the
MSB in TFD[0] and the LSB in TFD[7] of the transmit FIFO data TFD[7:0]. In bit synchronous mode, DT [1] is the
first bit transmitted.
FCS processing calculates an FCS and appends it to the packet. FCS calculation is a CRC-16 or CRC-32
calculation over the entire packet. The polynomial used for FCS-16 is x16 + x12 + x5 + 1. The polynomial used for
FCS-32 is x32 + x26 + x23 + x22 + x16 + x12 + x11 + x10 + x8 + x7 + x5 + x4 + x2 + x + 1. The FCS is inverted after
calculation. The FCS type is programmable. If FCS append is enabled, the calculated FCS is appended to the
packet. If FCS append is disabled, the packet is transmitted without an FCS. The FCS append mode is
programmable. If packet processing is disabled, FCS processing is not performed.
Packet error insertion inserts errors into the FCS bytes. A single FCS bit is corrupted in each errored packet. The
FCS bit corrupted is changed from errored packet to errored packet. Error insertion can be controlled by a register
or by the manual error insertion input (LI.TMEI.TMEI). The error insertion initiation type (register or input) is
programmable. If a register controls error insertion, the number and frequency of the errors are programmable. If
FCS append is disabled, packet error insertion will not be performed. If packet processing is disabled, packet error
insertion is not performed.
Stuffing inserts control data into the packet to prevent packet data from mimicking flags. A packet start indication is
received, and stuffing is performed until, a packet end indication is received. Bit stuffing consists of inserting a '0'
directly following any five contiguous '1's. If packet processing is disabled, stuffing is not performed.
There is at least one flag plus a programmable number of additional flags between packets. The inter-frame fill can
be flags or all '1's followed by a start flag. If the inter-frame fill is all '1's, the number of '1's between the end and
start flags does not need to be an integer number of bytes, however, there must be at least 15 consecutive '1's
between the end and start flags. The inter-frame padding type is programmable. If packet processing is disabled,
inter-frame padding is not performed.
Packet abort insertion inserts a packet abort sequences as necessary. If a packet abort indication is detected, a
packet abort sequence is inserted and inter-frame padding is done until a packet start flag is detected. The abort
sequence is FFh. If packet processing is disabled, packet abort insertion is not performed.
The packet scrambler is a x43 + 1 scrambler that scrambles the entire packet data stream. The packet scrambler
runs continuously, and is never reset. In bit synchronous mode, scrambling is performed one bit at a time. In byte
synchronous mode, scrambling is performed 8 bits at a time. Packet scrambling is programmable.
Once all packet processing has been completed serial data stream is passed on to the Transmit Serial Interface.
62 of 333
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
9.15 Receive Packet Processor
The Receive Packet Processor accepts data from the Receive Serial Interface performs packet descrambling,
packet delineation, inter-frame fill filtering, packet abort detection, destuffing, packet size checking, FCS error
monitoring, FCS byte extraction, and bit reordering. The data coming from the Receive Serial Interface is a serial
data stream. Packet processing can be disabled (clear channel enable). Disabling packet processing disables
packet delineation, inter-frame fill filtering, packet abort detection, destuffing, packet size checking, FCS error
monitoring, and FCS byte extraction. Only packet descrambling and bit reordering are not disabled.
The packet descrambler is a self-synchronous x43 + 1 descrambler that descrambles the entire packet data stream.
Packet descrambling is programmable. The descrambler runs continuously, and is never reset. The descrambling
is performed one bit at a time. Packet descrambling is programmable. If packet processing is disabled, the serial
data stream is demultiplexed in to an 8-bit data stream before being passed on.
If packet processing is disabled, a packet boundary is arbitrarily chosen and the data is divided into "packets" of
programmable size (dependent on maximum packet size setting). These packets are then passed on to bit
reordering with packet start and packet end indications. Data then bypasses packet delineation, inter-frame fill
filtering, packet abort detection, destuffing, packet size checking, FCS error monitoring, and FCS byte extraction.
Packet delineation determines the packet boundary by identifying a packet start or end flag. Each time slot is
checked for a flag sequence (7Eh). Once a flag is found, it is identified as a start/end flag and the packet boundary
is set. The flag check is performed one bit at a time. If packet processing is disabled, packet delineation is not
performed.
Inter-frame fill filtering removes the inter-frame fill between packets. When a packet end flag is detected, all data is
discarded until a packet start flag is detected. The inter-frame fill can be flags or all '1's. The number of '1's
between flags does not need to be an integer number of bytes, and if at least 7 '1's are detected in the first 16 bits
after a flag, all data after the flag is discarded until a start flag is detected. There may be only one flag between
packets. When the inter-frame fill is flags, the flags may have a shared zero (011111101111110). If there is less
than 16 bits between two flags, the data is discarded. If packet processing is disabled, inter-frame fill filtering is not
performed.
Packet abort detection searches for a packet abort sequence. Between a packet start flag and a packet end flag, if
an abort sequence is detected, the packet is marked with an abort indication, the aborted packet count is
incremented, and all subsequent data is discarded until a packet start flag is detected. The abort sequence is
seven consecutive ones. If packet processing is disabled, packet abort detection is not performed.
Destuffing removes the extra data inserted to prevent data from mimicking a flag or an abort sequence. A start flag
is detected, a packet start is set, the flag is discarded, destuffing is performed until an end flag is detected, a
packet end is set, and the flag is discarded. In bit synchronous mode, bit destuffing is performed. Bit destuffing
consists of discarding any '0' that directly follows five contiguous '1's. After destuffing is completed, the serial bit
stream is demultiplexed into an 8-bit parallel data stream and passed on with packet start, packet end, and packet
abort indications. If there is less than eight bits in the last byte, an invalid packet flag is raised, the packet is tagged
with an abort indication, and the packet size violation count is incremented. If packet processing is disabled,
destuffing is not performed.
Packet size checking checks each packet for a programmable maximum and programmable minimum size. As the
packet data comes in, the total number of bytes is counted. If the packet length is below the minimum size limit, the
packet is marked with an aborted indication, and the packet size violation count is incremented. If the packet length
is above the maximum size limit, the packet is marked with an aborted indication, the packet size violation count is
incremented, and all packet data is discarded until a packet start is received. The minimum and maximum lengths
include the FCS bytes, and are determined after destuffing has occurred. If packet processing is disabled, packet
size checking is not performed.
FCS error monitoring checks the FCS and aborts errored packets. If an FCS error is detected, the FCS errored
packet count is incremented and the packet is marked with an aborted indication. If an FCS error is not detected,
the receive packet count is incremented. The FCS type (16-bit or 32-bit) is programmable. If FCS processing or
packet processing is disabled, FCS error monitoring is not performed.
63 of 333
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
FCS byte extraction discards the FCS bytes. If FCS extraction is enabled, the FCS bytes are extracted from the
packet and discarded. If FCS extraction is disabled, the FCS bytes are stored in the receive FIFO with the packet.
If FCS processing or packet processing is disabled, FCS byte extraction is not performed.
Bit reordering changes the bit order of each byte. If bit reordering is disabled, the incoming 8-bit data stream
DT[1:8] with DT[1] being the MSB and DT[8] being the LSB is output to the Receive FIFO with the MSB in RFD[7]
(or 15, 23, or 31) and the LSB in RFD[0] (or 8, 16, or 24) of the receive FIFO data RFD[7:0] (or 15:8, 23:16, or
31:24). If bit reordering is enabled, the incoming 8-bit data stream DT[1:8] is output to the Receive FIFO with the
MSB in RFD[0] and the LSB in RFD[7] of the receive FIFO data RFD[7:0]. DT[1] is the first bit received from the
incoming data stream.
Once all the packet processing has been completed, the 8-bit parallel data stream is demultiplexed into a 32-bit
parallel data stream. The Receive FIFO data is passed on to the Receive FIFO with packet start, packet end,
packet abort, and modulus indications. At a packet end, the 32-bit word may contain 1, 2, 3, or 4 bytes of data
depending on the number of bytes in the packet. The modulus indications indicate the number of bytes in the last
data word of the packet.
Figure 9-12. HDLC Encapsulation of MAC Frame
Number of Bytes
Flag(0x7E)
1
Destination Adrs(DA)
6
Source Adrs(SA)
6
Length/Type
2
MAC Client Data
46-1500
PAD
FCS for MAC
4
FCS for HDLC
0/2/4
Flag(0x7E)
MSB
LSB
64 of 333
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
9.16 X.86 Encoding and Decoding
X.86 protocol provides a method for encapsulating Ethernet Frame onto LAPS. LAPS provides an HDLC-type
framing structure for encapsulation of Ethernet frames, but does not inflict dynamic bandwidth expansion as HDLC
does. LAPS encapsulated frames can be used to send data onto a SONET/SDH network. The device expects a
byte synchronization signal to provide the byte boundary for the X.86 receiver. This is provided by the RSYNC pin.
The functional timing is shown in Figure 14-7. The X.86 transmitter provides a byte boundary indicator with the
signal TSYNC. The functional timing is shown in Figure 14-6.
Figure 9-13. LAPS Encoding of MAC Frames Concept
IEEE
802.3 MAC Frame
LAPS
Rate Adaption
SDH
65 of 333
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
Figure 9-14. X.86 Encapsulation of the MAC field
Number of Bytes
Flag(0x7E)
1
Address(0x04)
1
Control(0x03)
1
1st Octect of SAPI(0xfe)
1
2nd Octect of SAPI(0x01)
1
Destination Adrs(DA)
6
Source Adrs(SA)
6
Length/Type
2
MAC Client Data
46-1500
PAD
FCS for MAC
4
FCS for LAPS
4
Flag(0x7E)
MSB
LSB
The device will encode the MAC Frame with the LAPS encapsulation on a complete serial stream if configured for
X.86 mode in the register LI.TX86E. The device provides the following functions:
•
•
•
Control Registers for Address, SAPI, Destination Address, Source Address
32 bit FCS enabled
Programmable X43+1 scrambling
The sequence of processing performed by the receiver is as follows:
•
•
•
•
•
•
•
Programmable octets X43+1 descrambling
Detect the Start Flag (7E)
Remove Rate adaptation octets 7d, dd.
Perform transparency-processing 7d, 5e is converted to 7e and 7d, 5d is converted to 7d.
Check for a valid Address, Control and SAPI fields (LI.TRX86A to LI.TRX86SAPIL)
Perform FCS checking
Detect the closing flag.
66 of 333
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
The X86 received frame is aborted if:
•
•
•
•
•
If 7d,7E is detected. This is an abort packet sequence in X.86
Invalid FCS is detected
The received frame has less than 6 octets
Control, SAPI and address field are mismatched to the programmed value
Octet 7d and octet other than 5d, 5e, 7e, or dd is detected
For the transmitter if X.86 is enabled the sequence of processing is as follows:
•
•
•
•
•
Construct frame including start flag SAPI, Control and MAC frame
Calculate FCS
Perform transparency processing - 7E is translated to 7D5E, 7D is translated to 7D5D
Append the end flag(7E)
Scramble the sequence X43+1
Note that the Serial transmit and receive registers apply to the X.86 implementations with specific exceptions. The
exceptions are outlined in the Serial Interface transmit and receive register sections.
67 of 333
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
9.17 Committed Information Rate Controller
The device provides a CIR provisioning facility. The CIR can be used to restrict the transport of received MAC data
to the serial port at a programmable rate. This is shown in the Main Block Diagram in Figure 6-1. The CIR will
restrict the data flow from the Receive MAC to Transmit HDLC. This can be used for provisioning and billing
functions towards the WAN. The user must set the CIR register to control the amount of data throughput from the
MAC to the HDLC/X.86 transmitter. The CIR register is in granularity of 500kbps with a range of 0 to 52Mbps. The
operation of the CIR is as follows:
•
The CIR block counts the credits that are accumulated at the end of every 125ms.
•
If data is received and stored in the SDRAM to be sent to the Serial Interface, the interface will request the
data if there is a positive credit balance. If the credit balance is negative, transmit interface does not
request data.
•
New credit balance is calculated: credit balance = old credit balance – frame size in bytes after the frame
is sent.
•
The credit balance is incremented every 125ms by CIR/8.
•
Credit balances not used in 250ms are reset to 0.
•
The maximum value of CIR can not exceed the transmit line rate.
•
If the data rate received from the Ethernet interface is higher than the CIR, the receive queue buffers will fill
and the high threshold water mark will invoke flow control to reduce the incoming traffic rate.
•
CIR function is only available in data received at the Ethernet Interface to be sent to WAN. There is not
CIR functionality for data arriving from the WAN to be sent to the Ethernet Interface.
•
Negative credits are not allowed, if there is not a credit balance, no frames are sent until there is a credit
balance again.
68 of 333
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
10 INTEGRATED T1/E1/J1 TRANSCEIVERS
10.1 T1/E1/J1 Transceiver Clocks
The device contains an on-chip clock synthesizer that generates a user-selectable clock referenced to the
recovered receive clock (RCLK). The synthesizer uses a phase-locked loop to generate low-jitter clocks. Common
applications include generation of port and backplane system clocks.
Figure 10-1. Transceiver Clock Structure shows the clock map of the transceivers. The routing for the transmit and
receive clocks are shown for the various loopback modes and jitter attenuator positions. Although there is only one
jitter attenuator, which can be placed in the receive or transmit path, two are shown for simplification and clarity.
Figure 10-1. Transceiver Clock Structure
MCLK
TSYSCLK
MCLKS = 0
MCLKS = 1
PRE-SCALER
TR.LIC4.MPS0
TR.LIC4.MPS1
2.048 TO 1.544
SYNTHESIZER
TR.LIC2.3
DJA = 1
8 x PLL
LOCAL
LOOPBACK
RCL = 1
RXCLK
TO
LIU
JITTER ATTENUATOR
SEE TR.LIC1
REGISTER
LLB = 0
LTCA
RCL = 0
JAS = 0
AND
DJA = 0
DJA = 0
REMOTE
LOOPBACK
FRAMER
LOOPBACK
FLB = 0
LLB = 1
JAS = 0
OR
DJA = 1
TXCLK
JAS = 1
OR
DJA = 1
PAYLOAD
LOOPBACK
(SEE NOTES)
BPCLK
SYNTH
RECEIVE
FRAMER
BPCLK
RCLKO
FLB = 1
RLB = 1
LTCA
JAS = 1
AND
DJA = 0
8XCLK
RLB = 0
PLB = 1
TRANSMIT
FORMATTER
PLB = 0
TCLKT
MUX
A
B
C
TCLKT
The TCLKT MUX is dependent on the state of the TCSS0 and TCSS1 bits in the TR.CCR1 register and the state of
the TCLKT pin.
69 of 333
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
Table 10-1. T1/E1/J1 Transmit Clock Source
TCSS1
TCSS0
0
0
0
1
1
0
1
1
Transmit Clock Source
The TCLKT pin (C) is always the source of transmit clock.
Switch to the recovered clock (B) when the signal at the TCLKT
pin fails to transition after one channel time.
Use the scaled signal (A) derived from MCLK as the transmit
clock. The TCLKT pin is ignored.
Use the recovered clock (B) as the transmit clock. The TCLKT
pin is ignored.
10.2 Per-Channel Operation
Some of the features described in the data sheet that operate on a per-channel basis use a special method for
channel selection. There are five registers involved: per-channel pointer register (TR.PCPR) and per-channel data
registers 1–4 (TR.PCDR1–4). The user selects which function or functions are to be applied on a per-channel
basis by setting the appropriate bit(s) in the TR.PCPR register. The user then writes to the TR.PCDR registers to
select the channels for that function. The following is an example of mapping the transmit and receive BERT
function to channels 9–12, 20, and 21.
Write
Write
Write
Write
Write
11h
00h
0fh
18h
00h
to
to
to
to
to
TR.PCPR
TR.PCDR1
TR.PCDR2
TR.PCDR3
TR.PCDR4
The user may write to the TR.PCDR1-4 with multiple functions in the TR.PCPR register selected, but can only read
the values from the TR.PCDR1-4 registers for a single function at a time. More information about how to use these
per-channel features can be found in the TR.PCPR register.
10.3 T1/E1/J1 Transceiver Interrupts
Various alarms, conditions, and events in the T1/E1/J1 transceiver can cause interrupts. For simplicity, these are
all referred to as events in this explanation. All status registers can be programmed to produce interrupts. Each
status register has an associated interrupt mask register. For example, TR.SR1 (status register 1) has an interrupt
control register called TR.IMR1 (interrupt mask register 1). Status registers are the only sources of interrupts in the
device. On power-up, all writeable registers of the T1/E1/J1 transceiver are automatically cleared. Since bits in the
TR.IMRx registers have to be set = 1 to allow a particular event to cause an interrupt, no interrupts can occur until
the host selects which events are to product interrupts. Since there are potentially many sources of interrupts on
the device, several features are available to help sort out and identify which event is causing an interrupt. When an
interrupt occurs, the host should first read the TR.IIR1 and TR.IIR2 registers (interrupt information registers) to
identify which status register (or registers) is producing the interrupt. Once that is determined, the individual status
register or registers can be examined to determine the exact source.
Once an interrupt has occurred, the interrupt handler routine should set the INTDIS bit (TR.CCR3.6) to stop further
activity on the interrupt pin. After all interrupts have been determined and processed, the interrupt hander routine
should re-enable interrupts by setting the INTDIS bit = 0.
Note that the integrated Ethernet Mapper also generates interrupts, as discussed in section 9.6.
70 of 333
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
10.4 T1 Framer/Formatter Control and Status
The T1 framer portion of the transceiver is configured through a set of nine control registers. Typically, the control
registers are only accessed when the system is first powered up. Once the transceiver has been initialized, the
control registers only need to be accessed when there is a change in the system configuration. There are two
receive control registers (TR.T1RCR1 and TR.T1RCR2), two transmit control registers (TR.T1TCR1 and
TR.T1TCR2), and a common control register (TR.T1CCR1). Each of these registers is described in this section.
10.4.1 T1 Transmit Transparency
The software signaling insertion-enable registers, TR.SSIE1– TR.SSIE4, can be used to select signaling insertion
from the transmit signaling registers, TS1–TS12, on a per-channel basis. Setting a bit in the TR.SSIEx register
allows signaling data to be sourced from the signaling registers for that channel.
In transparent mode, bit 7 stuffing and/or robbed-bit signaling is prevented from overwriting the data in the
channels. If a DS0 is programmed to be clear, no robbed-bit signaling is inserted nor does the channel have bit 7
stuffing performed. However, in the D4 framing mode, bit 2 is overwritten by a 0 when a Yellow Alarm is
transmitted. Also, the user has the option to globally override the TR.SSIEx registers from determining which
channels are to have bit 7 stuffing performed. If the TR.T1TCR1.3 and TR.T1TCR2.0 bits are set to 1, then all 24
T1 channels have bit 7 stuffing performed on them, regardless of how the TR.SSIEx registers are programmed. In
this manner, the TR.SSIEx registers are only affecting the channels that are to have robbed-bit signaling inserted
into them.
10.4.2 AIS-CI and RAI-CI Generation and Detection
The device can transmit and detect the RAI-CI and AIS-CI codes in T1 mode. These codes are compatible with
and do not interfere with the standard RAI (Yellow) and AIS (Blue) alarms. These codes are defined in ANSI
T1.403.
The AIS-CI code (alarm indication signal-customer installation) is the same for both ESF and D4 operation. Setting
the TAIS-CI bit in the TR.T1CCR1 register and the TBL bit in the TR.T1TCR1 register causes the device to
transmit the AIS-CI code. The RAIS-CI status bit in the TR.SR4 register indicates the reception of an AIS-CI signal.
The RAI-CI (remote alarm indication-customer installation) code for T1 ESF operation is a special form of the ESF
Yellow Alarm (an unscheduled message). Setting the RAIS-CI bit in the TR.T1CCR1 register causes the device to
transmit the RAI-CI code. The RAI-CI code causes a standard Yellow Alarm to be detected by the receiver. When
the host processor detects a Yellow Alarm, it can then test the alarm for the RAI-CI state by checking the BOC
detector for the RAI-CI flag. That flag is a 011111 code in the 6-bit BOC message.
The RAI-CI code for T1 D4 operation is a 10001011 flag in all 24 time slots. To transmit the RAI-CI code the host
sets all 24 channels to idle with a 10001011 idle code. Since this code meets the requirements for a standard T1
D4 Yellow Alarm, the host can use the receive channel monitor function to detect the 100001011 code whenever a
standard Yellow Alarm is detected.
71 of 333
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
10.4.3 T1 Receive-Side Digital-Milliwatt Code Generation
Receive-side digital-milliwatt code generation involves using the receive digital-milliwatt registers
(TR.T1RDMR1/2/3) to determine which of the 24 T1 channels of the T1 line going to the backplane should be
overwritten with a digital-milliwatt pattern. The digital-milliwatt code is an 8-byte repeating pattern that represents a
1kHz sine wave (1E/0B/0B/1E/9E/8B/8B/9E). Each bit in the TR.T1RDMRx registers represents a particular
channel. If a bit is set to a 1, then the receive data in that channel is replaced with the digital-milliwatt code. If a bit
is set to 0, no replacement occurs.
Table 10-2. T1 Alarm Criteria
ALARM
SET CRITERIA
CLEAR CRITERIA
Blue Alarm (AIS)
(Note 1)
Yellow Alarm (RAI)
D4 Bit 2 Mode
(TR.T1RCR2.0 = 0)
When over a 3ms window, five or
fewer 0s are received
When bit 2 of 256 consecutive
channels is set to 0 for at least 254
occurrences
When over a 3ms window, six or
more 0s are received
When bit 2 of 256 consecutive
channels is set to 0 for fewer than
254 occurrences
D4 12th F-Bit Mode
(TR.T1RCR2.0 = 1; this mode is
also referred to as the “Japanese
Yellow Alarm”)
When the 12th framing bit is set to 1
for two consecutive occurrences
When the 12th framing bit is set to
0 for two consecutive occurrences
ESF Mode
When 16 consecutive patterns of
00FF appear in the FDL
When 14 or fewer patterns of 00FF
hex out of 16 possible appear in
the FDL
Red Alarm (LRCL)
(Also referred to as loss of signal)
When 192 consecutive 0s are
received
When 14 or more 1s out of 112
possible bit positions are received
Note 1: The definition of Blue Alarm (or AIS) is an unframed all-ones signal. Blue Alarm detectors should be able to operate properly in the
presence of a 10E-3 error rate and they should not falsely trigger on a framed all-1s signal. Blue Alarm criteria in the device has been
set to achieve this performance. It is recommended that the RBL bit be qualified with the RLOS bit.
Note 2: ANSI specifications use a different nomenclature than this document. The following terms are equivalent:
RBL = AIS
RCL = LOS
RLOS = LOF
RYEL = RAI
72 of 333
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
10.5 E1 Framer/Formatter Control and Status
The E1 framer portion of the transceiver is configured by a set of four control registers. Typically, the control
registers are only accessed when the system is first powered up. Once the device has been initialized, the control
registers need only to be accessed when there is a change in the system configuration. There are two receive
control registers (TR.E1RCR1 and TR.E1RCR2) and two transmit control registers (TR.E1TCR1 and TR.E1TCR2).
There are also four status and information registers. Each of these eight registers is described in this section.
Table 10-3. E1 Sync/Resync Criteria
FRAME OR
MULTIFRAME
LEVEL
SYNC CRITERIA
RESYNC CRITERIA
ITU SPEC.
Three consecutive incorrect
FAS received
FAS
CRC4
CAS
FAS present in frame N and
N + 2; FAS not present in
frame N + 1
Two valid MF alignment
words found within 8ms
Valid MF alignment word
found and previous time slot
16 contains code other than
all 0s
G.706
4.1.1
4.1.2
Alternate: (TR.E1RCR1.2 = 1)
The above criteria is met or
three consecutive incorrect bit
2 of non-FAS received
915 or more CRC4 code words
out of 1000 received in error
G.706
4.2 and 4.3.2
Two consecutive MF alignment
words received in error
G.732
5.2
73 of 333
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
10.5.1 Automatic Alarm Generation
The device can be programmed to automatically transmit AIS or remote alarm. When automatic AIS generation is
enabled (TR.E1TCR2.1 = 1), the device monitors the receive-side framer to determine if any of the following
conditions are present: loss-of-receive frame synchronization, AIS alarm (all ones) reception, or loss-of-receive
carrier (or signal). The framer forces either an AIS or remote alarm if any one or more of these conditions is
present.
When automatic RAI generation is enabled (TR.E1TCR2.0 = 1), the framer monitors the receive side to determine
if any of the following conditions are present: loss-of-receive-frame synchronization, AIS alarm (all ones) reception,
loss-of-receive carrier (or signal), or if CRC4 multiframe synchronization cannot be found within 128ms of FAS
synchronization (if CRC4 is enabled). If any one or more of these conditions is present, then the framer transmits
an RAI alarm. RAI generation conforms to ETS 300 011 specifications and a constant remote alarm is transmitted
if the device cannot find CRC4 multiframe synchronization within 400ms as per G.706.
Note: It is an invalid state to have both automatic AIS generation and automatic remote alarm generation enabled
at the same time.
Table 10-4. E1 Alarm Criteria
ALARM
RLOS
RCL
RRA
RUA1
RDMA
V52LNK
SET CRITERIA
CLEAR CRITERIA
An RLOS condition exists on power-up
prior to initial synchronization, when a
resync criteria has been met, or when a
manual resync has been initiated by
TR.E1RCR1.0
255 or 2048 consecutive 0s received as
determined by TR.E1RCR2.0
Bit 3 of nonalign frame set to 1 for three
consecutive occasions
Fewer than three 0s in two frames (512
bits)
Bit 6 of time slot 16 in frame 0 has been set
for two consecutive multiframes
At least 32 1s in 255-bit times
are received
Bit 3 of nonalign frame set to
0 for three consecutive
occasions
More than two 0s in two
frames (512 bits)
Two out of three Sa7 bits are 0
ITU
SPECIFICATION
G.775/G.962
O.162
2.1.4
O.162
1.6.1.2
G.965
74 of 333
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
10.6 Loopback Configurations
The transceivers have four loopback configurations including Framer, Payload, Local, and Remote loopback.
Figure 10-2. depicts a normal signal flow without any loopbacks enabled.
Payload loopback may be done on a per-channel basis if both the transmit and receive paths are synchronous
(RCLK = TCLKT and RSYNC = TSYNC). See Section 10.6.1.
Figure 10-2. Normal Signal Flow Diagram
RECEIVE
LIU
JITTER
ATTENUATOR
RECEIVE
FRAMER
BACKPLANE
I/F
TRANSMIT
LIU
JITTER
ATTENUATOR
TRANSMIT
FRAMER
BACKPLANE
I/F
NORMAL MODE
75 of 333
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
10.6.1 Per-Channel Payload Loopback
The per-channel loopback registers (PCLRs) determine which channels (if any) from the backplane should be
replaced with the data from the receive side or, i.e., off of the T1 or E1 line. If this loopback is enabled, then
transmit and receive clocks and frame syncs must be synchronized. One method to accomplish this is to connect
RCLKO to TCLKT and RFSYNC to TSYNC. There are no restrictions on which channels can be looped back or on
how many channels can be looped back.
Each of the bit positions in the per-channel loopback registers (TR.PCLR1/ TR.PCLR2/ TR.PCLR3/ TR.PCLR4)
represents a DS0 channel in the outgoing frame. When these bits are set to a 1, data from the corresponding
receive channel replaces the data on TSERI for that channel.
76 of 333
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
10.7 Error Counters
The transceiver contains four counters that are used to accumulate line-coding errors, path errors, and
synchronization errors. Counter update options include one-second boundaries, 42ms (T1 mode only), 62ms (E1
mode only), or manual. See Error-Counter Configuration Register (TR.ERCNT). When updated automatically, the
user can use the interrupt from the timer to determine when to read these registers. All four counters saturate at
their respective maximum counts, and they do not roll over. Note: Only the line-code violation count register has
the potential to overflow, but the bit error would have to exceed 10E-2 before this would occur.
10.7.1 Line-Code Violation Counter (TR.LCVCR)
In T1 mode, code violations are defined as bipolar violations (BPVs) or excessive 0s. If the B8ZS mode is set for
the receive side, then B8ZS code words are not counted. This counter is always enabled; it is not disabled during
receive loss-of-synchronization (RLOS = 1) conditions. Table 10-5 shows what the LCVCRs count.
Table 10-5. T1 Line Code Violation Counting Options
COUNT EXCESSIVE
ZEROS?
(TR.ERCNT.0)
No
Yes
No
Yes
B8ZS ENABLED?
(TR.T1RCR2.5)
No
No
Yes
Yes
COUNTED IN THE LCVCRs
BPVs
BPVs + 16 consecutive 0s
BPVs (B8ZS code words not counted)
BPVs + 8 consecutive 0s
In E1 mode, either bipolar violations or code violations can be counted. Bipolar violations are defined as
consecutive marks of the same polarity. In this mode, if the HDB3 mode is set for the receive side, then HDB3
code words are not counted as BPVs. If TR.ERCNT.3 is set, then the LVC counts code violations as defined in ITU
O.161. Code violations are defined as consecutive bipolar violations of the same polarity. In most applications, the
framer should be programmed to count BPVs when receiving AMI code and to count CVs when receiving HDB3
code. This counter increments at all times and is not disabled by loss-of-sync conditions. The counter saturates at
65,535 and does not roll over. The bit-error rate on an E1 line would have to be greater than 10-2 before the VCR
would saturate (Table 10-6).
Table 10-6. E1 Line-Code Violation Counting Options
E1 CODE VIOLATION SELECT
(TR.ERCNT.3)
0
1
COUNTED IN THE LCVCRs
BPVs
CVs
77 of 333
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
10.7.2 Path Code Violation Count Register (TR.PCVCR)
In T1 mode, the path code violation count register records Ft, Fs, or CRC6 errors in T1 frames. When the receive
side of a framer is set to operate in the T1 ESF framing mode, TR.PCVCR records errors in the CRC6 code words.
When set to operate in the T1 D4 framing mode, TR.PCVCR counts errors in the Ft framing bit position. Through
the TR.ERCNT.2 bit, a framer can be programmed to also report errors in the Fs framing bit position. The
TR.PCVCR is disabled during receive loss-of-synchronization (RLOS = 1) conditions. Table 10-7 shows what
errors the TR.PCVCR counts.
Table 10-7. T1 Path Code Violation Counting Arrangements
FRAMING MODE
COUNT Fs ERRORS?
D4
D4
ESF
No
Yes
Don’t Care
COUNTED
IN THE PCVCRs
Errors in the Ft pattern
Errors in both the Ft and Fs patterns
Errors in the CRC6 code words
In E1 mode, the path code violation-count register records CRC4 errors. Since the maximum CRC4 count in a onesecond period is 1000, this counter cannot saturate. The counter is disabled during loss-of-sync at either the FAS
or CRC4 level; it continues to count if loss-of-multiframe sync occurs at the CAS level.
Path code violation-count register 1 (TR.PCVCR1) is the most significant word and TR.PCVCR2 is the least
significant word of a 16-bit counter that records path violations (PVs).
78 of 333
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
10.7.3 Frames Out-of-Sync Count Register (TR.FOSCR)
In T1 mode, TR.FOSCR is used to count the number of multiframes that the receive synchronizer is out of sync.
This number is useful in ESF applications needing to measure the parameters loss-of-frame count (LOFC) and
ESF error events as described in AT&T publication TR54016. When TR.FOSCR is operated in this mode, it is not
disabled during receive loss-of-synchronization (RLOS = 1) conditions. TR.FOSCR has an alternate operating
mode whereby it counts either errors in the Ft framing pattern (in the D4 mode) or errors in the FPS framing pattern
(in the ESF mode). When TR.FOSCR is operated in this mode, it is disabled during receive loss-of-synchronization
(RLOS = 1) conditions. Table 10-8 shows what the FOSCR is capable of counting.
Table 10-8. T1 Frames Out-of-Sync Counting Arrangements
FRAMING MODE
(TR.T1RCR1.3)
D4
D4
ESF
ESF
COUNT MOS OR
F-BIT ERRORS
(TR.ERCNT.1)
MOS
F-Bit
MOS
F-Bit
COUNTED IN THE FOSCRs
Number of multiframes out-of-sync
Errors in the Ft pattern
Number of multiframes out-of-sync
Errors in the FPS pattern
In E1 mode, TR.FOSCR counts word errors in the FAS in time slot 0. This counter is disabled when RLOS is high.
FAS errors are not counted when the framer is searching for FAS alignment and/or synchronization at either the
CAS or CRC4 multiframe level. Since the maximum FAS word error count in a one-second period is 4000, this
counter cannot saturate.
The frames out-of-sync count register 1 (TR.FOSCR1) is the most significant word and TR.FOSCR2 is the least
significant word of a 16-bit counter that records frames out-of-sync.
10.7.4 E-Bit Counter (TR.EBCR)
This counter is only available in E1 mode. E-bit count register 1 (TR.EBCR1) is the most significant word and
TR.EBCR2 is the least significant word of a 16-bit counter that records far-end block errors (FEBE) as reported in
the first bit of frames 13 and 15 on E1 lines running with CRC4 multiframe. These count registers increment once
each time the received E-bit is set to 0. Since the maximum E-bit count in a one-second period is 1000, this
counter cannot saturate. The counter is disabled during loss-of-sync at either the FAS or CRC4 level; it continues
to count if loss-of-multiframe sync occurs at the CAS level.
79 of 333
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
10.8 DS0 Monitoring Function
The transceiver has the ability to monitor one DS0 64kbps channel in the transmit direction and one DS0 channel
in the receive direction at the same time. In the transmit direction, the user determines which channel is to be
monitored by properly setting the TCM0 to TCM4 bits in the TR.TDS0SEL register. In the receive direction, the
RCM0 to RCM4 bits in the TR.RDS0SEL register need to be properly set. The DS0 channel pointed to by the
TCM0 to TCM4 bits appear in the transmit DS0 monitor (TR.TDS0M) register. The DS0 channel pointed to by the
RCM0 to RCM4 bits appear in the receive DS0 (TR.RDS0M) register. The TCM4 to TCM0 and RCM4 to RCM0
bits should be programmed with the decimal decode of the appropriate T1or E1 channel. T1 channels 1 through 24
map to register values 0 through 23. E1 channels 1 through 32 map to register values 0 through 31. For example,
if DS0 channel 6 in the transmit direction and DS0 channel 15 in the receive direction needed to be monitored,
then the following values would be programmed into TR.TDS0SEL and TR.RDS0SEL:
TCM4 = 0
TCM3 = 0
TCM2 = 1
TCM1 = 0
TCM0 = 1
RCM4 = 0
RCM3 = 1
RCM2 = 1
RCM1 = 1
RCM0 = 0
80 of 333
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
10.9 Signaling Operation
There are two methods to access receive signaling data and provide transmit signaling data, processor-based
(software-based) or hardware-based. Processor-based refers to access through the transmit and receive signaling
registers RS1–RS16 and TS1–TS16. Hardware-based refers to the TSIG and RSIG pins. Both methods can be
used simultaneously.
Figure 10-3. Simplified Diagram of Receive Signaling Path
PER-CHANNEL
CONTROL
T1/E1 DATA STREAM
SIGNALING
EXTRACTION
ALL-ONES
RECEIVE SIGNALING
REGISTERS
CHANGE-OF-STATE
INDICATION
REGISTERS
REINSERTION
CONTROL
SIGNALING
BUFFERS
RSERO
RSYNC
RSIG
10.9.1 Processor-Based Receive Signaling
The robbed-bit signaling (T1) or TS16 CAS signaling (E1) is sampled in the receive data stream and copied into
the receive signaling registers, RS1–RS16. In T1 mode, only RS1–RS12 are used. The signaling information in
these registers is always updated on multiframe boundaries. This function is always enabled.
10.9.1.1 Change-of-State
To avoid constant monitoring of the receive signaling registers, the transceiver can be programmed to alert the
host when any specific channel or channels undergo a change of their signaling state. TR.RSCSE1 – TR.RSCSE4
for E1 and TR.RSCSE1 – TR.RSCSE3 for T1 are used to select which channels can cause a change-of-state
indication. The change-of-state is indicated in status register 5 (TR.SR1.5). If signaling integration (TR.CCR1.5) is
enabled, then the new signaling state must be constant for three multiframes before a change-of-state is indicated.
The user can enable the INT pin to toggle low upon detection of a change in signaling by setting the TR.IMR1.5 bit.
The signaling integration mode is global and cannot be enabled on a channel-by-channel basis.
The user can identity which channels have undergone a signaling change-of-state by reading the TR.RSINFO1–
TR.RSINFO4 registers. The information from these registers inform the user which TR.RSx register to read for the
new signaling data. All changes are indicated in the TR.RSINFO1 – TR.RSINFO4 registers regardless of the
TR.RSCSE1 – TR.RSCSE4 registers.
81 of 333
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
10.9.2 Hardware-Based Receive Signaling
In hardware-based signaling the signaling data can be obtained from the RSERO pin or the RSIG pin. RSIG is a
signaling PCM stream output on a channel-by-channel basis from the signaling buffer. The signaling data, T1
robbed bit or E1 TS16, is still present in the original data stream at RSERO. The signaling buffer provides signaling
data to the RSIG pin and also allows signaling data to be reinserted into the original data stream in a different
alignment that is determined by a multiframe signal from the RSYNC pin. In this mode, the receive elastic store can
be enabled or disabled. If the receive elastic store is enabled, then the backplane clock (RSYSCLK) can be either
1.544MHz or 2.048MHz. In the ESF framing mode, the ABCD signaling bits are output on RSIG in the lower nibble
of each channel. The RSIG data is updated once a multiframe (3ms) unless a freeze is in effect. In the D4 framing
mode, the AB signaling bits are output twice on RSIG in the lower nibble of each channel. Hence, bits 5 and 6
contain the same data as bits 7 and 8, respectively, in each channel. The RSIG data is updated once a multiframe
(1.5ms) unless a freeze is in effect. See the timing diagrams in Section 12 for some examples.
10.9.2.1 Receive Signaling Reinsertion at RSERO
In this mode, the user provides a multiframe sync at the RSYNC pin and the signaling data is reinserted based on
this alignment. In T1 mode, this results in two copies of the signaling data in the RSERO data stream, the original
signaling data and the realigned data. This is of little consequence in voice channels. Reinsertion can be avoided
in data channels since this feature is activated on a per-channel basis. In this mode, the elastic store must be
enabled; however, the backplane clock can be either 1.544MHz or 2.048MHz.
Signaling reinsertion can be enabled on a per-channel basis by setting the RSRCS bit high in the TR.PCPR
register. The channels that will have signaling reinserted are selected by writing to the TR.PCDR1–TR.PCDR3
registers for T1 mode and TR.PCDR1–TR.PCDR4 registers for E1 mode. In E1 mode, the user generally selects
all channels or none for reinsertion. In E1 mode, signaling reinsertion on all channels can be enabled with a single
bit, TR.SIGCR.7 (GRSRE). This bit allows the user to reinsert all signaling channels without having to program all
channels through the per-channel function.
10.9.2.2 Force Receive Signaling All Ones
In T1 mode, the user can, on a per-channel basis, force the robbed-bit signaling bit positions to a 1 by using the
per-channel register (Section 10.2). The user sets the BTCS bit in the TR.PCPR register. The channels that will be
forced to 1 are selected by writing to the TR.PCDR1–TR.PCDR3 registers.
10.9.2.3 Receive Signaling Freeze
The signaling data in the four multiframe signaling buffers is frozen in a known good state upon either a loss of
synchronization (OOF event), carrier loss, or frame slip. This action meets the requirements of BellCore TR–TSY–
000170 for signaling freezing. To allow this freeze action to occur, the RFE control bit (TR.SIGCR.4) should be set
high. The user can force a freeze by setting the RFF control bit (TR.SIGCR.3) high. The RSIGF output pin provides
a hardware indication that a freeze is in effect. The four-multiframe buffer provides a three-multiframe delay in the
signaling bits provided at the RSIG pin (and at the RSERO pin if receive signaling reinsertion is enabled). When
freezing is enabled (RFE = 1), the signaling data is held in the last-known good state until the corrupting error
condition subsides. When the error condition subsides, the signaling data is held in the old state for at least an
additional 9ms (or 4.5ms in D4 framing mode) before updating with new signaling data.
82 of 333
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
Figure 10-4. Simplified Diagram of Transmit Signaling Path
TRANSMIT
SIGNALING
REGISTERS
1
0
0
T1/E1 DATA
STREAM
TSERI
0
1
1
B7
SIGNALING
BUFFERS
TSIG
TR.T1TCR1.4
PER-CHANNEL
CONTROL
PER-CHANNEL
CONTROL
TR.PCPR.3
TR.SSIE1 TR.SSIE4
ONLY APPLIES TO T1 MODE
10.9.3 Processor-Based Transmit Signaling
In processor-based mode, signaling data is loaded into the transmit signaling registers (TS1–TS16) by the host
interface. On multiframe boundaries, the contents of these registers are loaded into a shift register for placement in
the appropriate bit position in the outgoing data stream. The user can employ the transmit multiframe interrupt in
status register 4 (TR.SR4.4) to know when to update the signaling bits. The user need not update any transmit
signaling register for which there is no change-of-state for that register.
Each transmit signaling register contains the robbed-bit signaling (T1) or TS16 CAS signaling (E1) for two time
slots that are inserted into the outgoing stream, if enabled to do so through TR.T1TCR1.4 (T1 mode) or
TR.E1TCR1.6 (E1 mode). In T1 mode, only TS1–TS12 are used.
Signaling data can be sourced from the TR.TS registers on a per-channel basis by using the software signaling
insertion enable registers, TR.SSIE1–TRSSIE4.
10.9.3.1 T1 Mode
In T1 ESF framing mode, there are four signaling bits per channel (A, B, C, and D). TS1–TS12 contain a full
multiframe of signaling data. In T1 D4 framing mode, there are only two signaling bits per channel (A and B). In T1
D4 framing mode, the framer uses the C and D bit positions as the A and B bit positions for the next multiframe. In
D4 mode, two multiframes of signaling data can be loaded into TS1–TS12. The framer loads the contents of TS1–
TS12 into the outgoing shift register every other D4 multiframe. In D4 mode, the host should load new contents into
TS1–TS12 on every other multiframe boundary and no later than 120µs after the boundary. In T1 mode, only
registers TR.SSIE1–TR.SSIE3 are used since there are only 24 channels in a T1 frame.
83 of 333
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
10.9.3.2 E1 Mode
In E1 mode, TS16 carries the signaling information. This information can be in either CCS (common channel
signaling) or CAS (channel associated signaling) format. The 32 time slots are referenced by two different channel
number schemes in E1. In “Channel” numbering, TS0–TS31 are labeled channels 1 through 32. In “Phone
Channel” numbering, TS1–TS15 are labeled channel 1 through channel 15 and TS17–TS31 are labeled channel
15 through channel 30. In E1 CAS mode, the CAS signaling alignment/alarm byte can be sourced from the
transmit signaling registers along with the signaling data.
Table 10-9. Time Slot Numbering Schemes
0 1 2 3 4 5 6 7 8 9 1
0
1 2 3 4 5 6 7 8 9 1 1
Channel
0 1
1 2 3 4 5 6 7 8 9 1
Phone
0
Channel
TS
1
1
1
2
1
1
1
2
1
3
1
2
1
3
1
4
1
3
1
4
1
5
1
4
1
5
1
6
1
5
1
6
1
7
1
7
1
8
1
6
1
8
1
9
1
7
1
9
2
0
1
8
2
0
2
1
1
9
2
1
2
2
2
0
2
2
2
3
2
1
2
3
2
4
2
2
2
4
2
5
2
3
2
5
2
6
2
4
2
6
2
7
2
5
2
7
2
8
2
6
2
8
2
9
2
7
2
9
3
0
2
8
3
0
3
1
2
9
3
1
3
2
3
0
10.9.4 Hardware-Based Transmit Signaling
In hardware-based mode, signaling data is input through the TSIG pin. This signaling PCM stream is buffered and
inserted to the data stream being input at the TSERI pin.
Signaling data can be inserted on a per-channel basis by the transmit hardware-signaling channel-select (THSCS)
function. The user can control which channels are to have signaling data from the TSIG pin inserted into them on a
per-channel basis. See Section 10.2 for details on using this per-channel (THSCS) feature. The signaling insertion
capabilities of the framer are available whether the transmit-side elastic store is enabled or disabled. If the elastic
store is enabled, the backplane clock (TSYSCLK) can be either 1.544MHz or 2.048MHz. Also, if the elastic is
enabled in conjunction with transmit hardware signaling, CCR3.7 must be set = 0.
84 of 333
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
10.10 Per-Channel Idle Code Generation
Channel data can be replaced by an idle code on a per-channel basis in the transmit and receive directions. When
operated in the T1 mode, only the first 24 channels are used by the device, the remaining channels, CH25–CH32,
are not used.
The device contains a 64-byte idle code array accessed by the idle array address register (TR.IAAR) and the perchannel idle code register (TR.PCICR). The contents of the array contain the idle codes to be substituted into the
appropriate transmit or receive channels. This substitution can be enabled and disabled on a per-channel basis by
the transmit-channel idle code-enable registers (TR.TCICE1–4) and receive-channel idle code-enable registers
(TR.RCICE1–4).
To program idle codes, first select a channel by writing to the TR.IAAR register. Then write the idle code to the
TR.PCICR register. For successive writes there is no need to load the TR.IAAR with the next consecutive address.
The TR.IAAR register automatically increments after a write to the TR.PCICR register. The auto increment feature
can be used for read operations as well. Bits 6 and 7 of the TR.IAAR register can be used to block write a common
idle code to all transmit or receive positions in the array with a single write to the TR.PCICR register. Bits 6 and 7
of the TR.IAAR register should not be used for read operations. TR.TCICE1–4 and TR.RCICE1–4 are used to
enable idle code replacement on a per-channel basis.
Table 10-10. Idle-Code Array Address Mapping
BITS 0 to 5 OF IAAR
REGISTER
0
1
2
—
—
30
31
32
33
34
—
—
62
63
MAPS TO CHANNEL
Transmit Channel 1
Transmit Channel 2
Transmit Channel 3
—
—
Transmit Channel 31
Transmit Channel 32
Receive Channel 1
Receive Channel 2
Receive Channel 3
—
—
Receive Channel 31
Receive Channel 32
85 of 333
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
10.10.1 Idle-Code Programming Examples
Example 1
Sets transmit channel 3 idle code to 7Eh.
Write TR.IAAR = 02h
Write TR.PCICR = 7Eh
;select channel 3 in the array
;set idle code to 7Eh
Example 2
Sets transmit channels 3, 4, 5, and 6 idle code to 7Eh and enables transmission of idle codes for those channels.
Write
Write
Write
Write
Write
Write
TR.IAAR = 02h
TR.PCICR = 7Eh
TR.PCICR = 7Eh
TR.PCICR = 7Eh
TR.PCICR = 7Eh
TR.TCICE1 = 3Ch
;select channel 3 in the array
;set channel 3 idle code to 7Eh
;set channel 4 idle code to 7Eh
;set channel 5 idle code to 7Eh
;set channel 6 idle code to 7Eh
;enable transmission of idle codes for channels 3,4,5, and 6
Example 3
Sets transmit channels 3, 4, 5, and 6 idle code to 7Eh, EEh, FFh, and 7Eh, respectively.
Write
Write
Write
Write
Write
TR.IAAR = 02h
TR.PCICR = 7Eh
TR.PCICR = EEh
TR.PCICR = FFh
TR.PCICR = 7Eh
Example 4
Sets all transmit idle codes to 7Eh.
Write TR.IAAR = 4xh
Write TR.PCICR = 7Eh
Example 5
Sets all receive and transmit idle codes to 7Eh and enables idle code substitution in all E1 transmit and receive
channels.
Write TR.IAAR = Cxh
;enable block write to all transmit and receive positions in the array
Write TR.PCICR = 7Eh
;7Eh is idle code
Write TR.TCICE1 = FEh ;enable idle code substitution for transmit channels 2 through 8
;Although an idle code was programmed for channel 1 by the block write
;function above, enabling it for channel 1 would step on the frame
;alignment, alarms, and Sa bits
Write TR.TCICE2 = FFh ;enable idle code substitution for transmit channels 9 through 16
Write TR.TCICE3 = FEh ;enable idle code substitution for transmit channels 18 through 24
;Although an idle code was programmed for channel 17 by the block write
;function above, enabling it for channel 17 would step on the CAS frame
;alignment, and signaling information
Write TR.TCICE4 = FFh ;enable idle code substitution for transmit channels 25 through 32
Write TR.RCICE1 = FEh ;enable idle code substitution for receive channels 2 through 8
Write TR.RCICE2 = FFh ;enable idle code substitution for receive channels 9 through 16
Write TR.RCICE3 = FEh ;enable idle code substitution for receive channels 18 through 24
Write TR.RCICE4 = FFh ;enable idle code substitution for receive channels 25 through 32
The transmit-channel idle-code enable registers (TR.TCICE1/2/3/4) are used to determine which of the 24 T1 or 32
E1 channels from the backplane to the T1 or E1 line should be overwritten with the code placed in the per-channel
code array.
The receive-channel idle-code enable registers (TR.RCICE1/2/3/4) are used to determine which of the 24 T1 or 32
E1 channels from the backplane to the T1 or E1 line should be overwritten with the code placed in the per-channel
code array.
86 of 333
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
10.11 Channel Blocking Registers
The receive channel blocking registers (TR.RCBR1/TR.RCBR2/TR.RCBR3/TR.RCBR4) and the transmit channel
blocking registers (TR.TCBR1/TR.TCBR2/TR.TCBR3/TR.TCBR4) control RCHBLK and TCHBLK pins,
respectively. The RCHBLK and TCHBLK pins are user-programmable outputs that can be forced either high or low
during individual channels. These outputs can be used to block clocks to a USART or LAPD controller in ISDN-PRI
applications. When the appropriate bits are set to a 1, the RCHBLK and TCHBLK pins are held high during the
entire corresponding channel time. Channels 25 through 32 are ignored when the device is operated in the T1
mode.
10.12 Elastic Stores Operation
The device contains dual two-frame elastic stores, one for the receive direction and one for the transmit direction.
Both elastic stores are fully independent. The transmit and receive-side elastic stores can be enabled/disabled
independently of each other. Also, each elastic store can interface to either a 1.544MHz or 2.048MHz/4.096MHz/
8.192MHz/16.384MHz backplane without regard to the backplane rate the other elastic store is interfacing to. In
most DS33R41 applications, all elastic stores will be enabled.
The elastic stores have two main purposes. Firstly, they can be used for rate conversion. When the device is in the
T1 mode, the elastic stores can rate-convert the T1 data stream to a 2.048MHz backplane. In E1 mode, the elastic
store can rate-convert the E1 data stream to a 1.544MHz backplane. Secondly, they can be used to absorb the
differences in frequency and phase between the T1 or E1 data stream and an asynchronous (i.e., not locked)
backplane clock, which can be 1.544MHz or 2.048MHz. In this mode, the elastic stores manage the rate difference
and perform controlled slips, deleting or repeating frames of data in order to manage the difference between the
network and the backplane. The elastic stores can also be used to multiplex T1 or E1 data streams into higher
backplane rates.
The elastic stores are used to multiplex the four T1/E1 data streams into an 8.192MHz backplane rate for
connection with the integrated Ethernet Mapper. See the Interleaved PCM Bus Operation section.
10.12.1 Receive Side
See the TR.IOCR1 and TR.IOCR2 registers for information on clock and I/O configurations. If the receive-side
elastic store is enabled, then the user must provide either a 1.544MHz or 2.048MHz clock at the RSYSCLK pin.
For higher rate system-clock applications, see the Interleaved PCM Bus Operation section. The user has the
option of either providing a frame/multiframe sync at the RSYNC pin or having the RSYNC pin provide a pulse on
frame/multiframe boundaries. If signaling reinsertion is enabled, signaling data in TS16 is realigned to the
multiframe-sync input on RSYNC. Otherwise, a multiframe-sync input on RSYNC is treated as a simple frame
boundary by the elastic store. The framer will always indicate frame boundaries on the network side of the elastic
store via the RFSYNC output whether the elastic store is enabled or not. Multiframe boundaries will always be
indicated via the RMSYNC output. If the elastic store is enabled, then RMSYNC will output the multiframe
boundary on the backplane side of the elastic store.
10.12.1.1 T1 Mode
If the user selects to apply a 2.048MHz clock to the RSYSCLK pin, then the data output at RSERO will be forced to
all ones every fourth channel and the F-bit will be passed into the MSB of TS0. Hence, channels 1 (bits 1–7), 5, 9,
13, 17, 21, 25, and 29 (time slots 0 (bits 1–7), 4, 8, 12, 16, 20, 24, and 28) will be forced to a one. Also, in
2.048MHz applications, the RCHBLK output will be forced high during the same channels as the RSERO pin. This
is useful in T1 to E1 conversion applications. If the two-frame elastic buffer either fills or empties, a controlled slip
will occur. If the buffer empties, then a full frame of data will be repeated at RSERO and the TR.SR5.0 and
TR.SR5.1 bits will be set to a one. If the buffer fills, then a full frame of data will be deleted and the TR.SR5.0 and
TR.SR5.2 bits will be set to a one.
10.12.1.2 E1 Mode
If the elastic store is enabled, then either CAS or CRC-4 multiframe boundaries will be indicated via the RMSYNC
output. If the user selects to apply a 1.544MHz clock to the RSYSCLK pin, then every fourth channel of the
received E1 data will be deleted and a F-bit position (which will be forced to one) will be inserted. Hence, channels
87 of 333
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
1, 5, 9, 13, 17, 21, 25, and 29 (time slots 0, 4, 8, 12, 16, 20, 24, and 28) will be deleted from the received E1 data
stream. Also, in 1.544MHz applications, the RCHBLK output will not be active in channels 25 through 32 (or in
other words, RCBR4 is not active). If the two-frame elastic buffer either fills or empties, a controlled slip will occur.
If the buffer empties, then a full frame of data will be repeated at RSERO and the TR.SR5.0 and TR.SR5.1 bits will
be set to a one. If the buffer fills, then a full frame of data will be deleted and the TR.SR5.0 and TR.SR5.2 bits will
be set to a one.
10.12.2 Transmit Side
See the TR.IOCR1 and TR.IOCR2 registers for information on clock and I/O configurations. The operation of the
transmit elastic store is very similar to the receive side. If the transmit-side elastic store is enabled a 1.544MHz or
2.048MHz clock can be applied to the TSYSCLK input. For higher-rate system clock applications, see the
Interleaved PCM Bus Operation section. Controlled slips in the transmit elastic store are reported in the TR.SR5.3
bit and the direction of the slip is reported in the TR.SR5.4 and TR.SR5.5 bits.
10.12.2.1 T1 Mode
If the user selects to apply a 2.048MHz clock to the TSYSCLK pin, then the data input at TSERI will be ignored
every fourth channel. Hence, channels 1, 5, 9, 13, 17, 21, 25, and 29 (time slots 0, 4, 8, 12, 16, 20, 24, and 28) will
be ignored. The user can supply frame or multiframe sync pulse to the TSSYNC input. Also, in 2.048MHz
applications, the TCHBLK output will be forced high during the channels ignored by the framer.
10.12.2.2 E1 Mode
A 1.544MHz or 2.048MHz clock can be applied to the TSYSCLK input. The user must supply a frame-sync pulse
or a multiframe-sync pulse to the TSSYNC input.
10.12.3 Elastic Stores Initialization
There are two elastic-store initializations that can be used to improve performance in certain applications: elastic
store reset and elastic store align. Both of these involve the manipulation of the elastic store’s read and write
pointers and are useful primarily in synchronous applications (RSYSCLK/TSYSCLK are locked to RCLK/TCLKT,
respectively). See Table 10-11. for details.
Table 10-11. Elastic Store Delay After Initialization
INITIALIZATION
REGISTER BIT
Receive Elastic Store Reset
Transmit Elastic Store Reset
Receive Elastic Store Align
Transmit Elastic Store Align
TR.ESCR.2
TR.ESCR.6
TR.ESCR.3
TR.ESCR.7
DELAY
8 Clocks < Delay < 1 Frame
1 Frame < Delay < 2 Frames
½ Frame < Delay < 1 ½ Frames
½ Frame < Delay < 1 ½ Frames
10.12.3.1 Minimum-Delay Mode
When minimum delay mode is enabled the elastic stores will be forced to a maximum depth of 32 bits instead of
the normal two-frame depth. TR.ESCR.5 and TR.ESCR.1 enable the transmit and receive elastic store minimumdelay modes. This feature is useful primarily in applications that interface T1 to a 2.048MHz bus without adding the
latency that would be associated with using the elastic store in full buffer mode. Certain restrictions apply when
minimum delay mode is used. Minimum-delay mode can only be used when the elastic store’s system clock is
locked to its network clock (e.g., RCLK locked to RSYSCLK for the receive side and TCLKT locked to TSYSCLK
for the transmit side). RSYNC must be configured as an output. In E1 operation TSYNC must be configured as an
input when transmit minimum delay mode is enabled. In T1 operation TSYNC can be configured as an input or
output when transmit minimum delay mode is enabled. In a typical application RSYSCLK and TSYSCLK are
locked to RCLK, and RSYNC (frame output mode) is connected to TSSYNC (frame input mode). All of the slip
contention logic in the framer is disabled (since slips cannot occur). On power-up, after the RSYSCLK and
TSYSCLK signals have locked to their respective network clock signals, the elastic store reset bits (TR.ESCR.2
and TR.ESCR.6) should be toggled from a zero to a one to ensure proper operation.
88 of 333
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
10.13 G.706 Intermediate CRC-4 Updating (E1 Mode Only)
The device can implement the G.706 CRC-4 recalculation at intermediate path points. When this mode is enabled,
the data stream presented at TSERI already has the FAS/NFAS, CRC multiframe alignment word, and CRC-4
checksum in time slot 0. The user can modify the Sa bit positions. This change in data content is used to modify
the CRC-4 checksum. This modification, however, does not corrupt any error information the original CRC-4
checksum may contain. In this mode of operation, TSYNC must be configured to multiframe mode. The data at
TSERI must be aligned to the TSYNC signal. If TSYNC is an input, then the user must assert TSYNC aligned at
the beginning of the multiframe relative to TSERI. If TSYNC is an output, the user must multiframe-align the data
presented to TSERI.
Figure 10-5. CRC-4 Recalculate Method
TPOSO/TNEGO
INSERT
NEW CRC-4
CODE
EXTRACT
OLD CRC-4
CODE
TSER
+
CRC-4
CALCULATOR
XOR
MODIFY
Sa BIT
POSITIONS
NEW Sa BIT
DATA
89 of 333
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
10.14 T1 Bit-Oriented Code (BOC) Controller
The transceiver contains a BOC generator on the transmit side and a BOC detector on the receive side. The BOC
function is available only in T1 mode.
10.14.1 Transmit BOC
Bits 0 to 5 in the TR.TFDL register contain the BOC message to be transmitted. Setting TR.BOCC.0 = 1 causes
the transmit BOC controller to immediately begin inserting the BOC sequence into the FDL bit position. The
transmit BOC controller automatically provides the abort sequence. BOC messages are transmitted as long as
TR.BOCC.0 is set.
Transmit a BOC
1) Write 6-bit code into the TR.TFDL register.
2) Set the SBOC bit in TR.BOCC = 1.
10.15 Receive BOC
The receive BOC function is enabled by setting TR.BOCC.4 = 1. The TR.RFDL register now operates as the
receive BOC message and information register. The lower six bits of the TR.RFDL register (BOC message bits)
are preset to all 1s. When the BOC bits change state, the BOC change-of-state indicator, TR.SR8.0, alerts the
host. The host then reads the TR.RFDL register to get the BOC status and message. A change-of-state occurs
when either a new BOC code has been present for a time determined by the receive BOC filter bits RBF0 and
RBF1 in the TR.BOCC register, or a invalid code is being received.
Receive a BOC
1) Set integration time through TR.BOCC.1 and TR.BOCC.2.
2) Enable the receive BOC function (TR.BOCC.4 = 1).
3) Enable interrupt (TR.IMR8.0 = 1).
4) Wait for interrupt to occur.
5) Read the TR.RFDL register.
6) If TR.SR2.7 = 1, then a valid BOC message was received.
The lower six bits of the TR.RFDL register comprise the message.
90 of 333
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
10.16 Additional (Sa) and International (Si) Bit Operation (E1 Only)
When operated in the E1 mode, the transceiver provides two methods for accessing the Sa and the Si bits. The
first method involves using the internal TR.RAF/ TR.RNAF and TR.TAF/ TR.TNAF registers (Section 10.16.1). The
second method, which is covered in Section 10.16.2, involves an expanded version of the first method.
10.16.1 Method 1: Internal Register Scheme Based on Double-Frame
On the receive side, the TR.RAF and TR.RNAF registers always report the data as it received in the Sa and Si bit
locations. The TR.RAF and TR.RNAF registers are updated on align-frame boundaries. The setting of the receive
align frame bit in Status Register 4 (TR.SR4.0) indicates that the contents of the TR.RAF and TR.RNAF have been
updated. The host can use the TR.SR4.0 bit to know when to read the TR.RAF and TR.RNAF registers. The host
has 250µs to retrieve the data before it is lost.
On the transmit side, data is sampled from the TR.TAF and TR.TNAF registers with the setting of the transmit align
frame bit in Status Register 4 (TR.SR4.3). The host can use the TR.SR4.3 bit to know when to update the TR.TAF
and TR.TNAF registers. It has 250µs to update the data or else the old data is retransmitted. If the TR.TAF and
TR.TNAF registers are only being used to source the align frame and nonalign frame-sync patterns, then
the host need only write once to these registers. Data in the Si bit position is overwritten if either the framer is
(1) programmed to source the Si bits from the TSERI pin, (2) in the CRC4 mode, or (3) has automatic E-bit
insertion enabled. Data in the Sa bit position is overwritten if any of the TR.E1TCR2.3 to TR.E1TCR2.7 bits are set
to 1.
10.16.2 Method 2: Internal Register Scheme Based on CRC4 Multiframe
The receive side contains a set of eight registers (TR.RSiAF, TR.RSiNAF, TR.RRA, and TR.RSa4 – TR.RSa8) that
report the Si and Sa bits as they are received. These registers are updated with the setting of the receive CRC4
multiframe bit in Status Register 2 (TR.SR4.1). The host can use the TR.SR4.1 bit to know when to read these
registers. The user has 2ms to retrieve the data before it is lost. The MSB of each register is the first received. See
the following register descriptions for more details.
The transmit side also contains a set of eight registers (TR.TSiAF, TR.TSiNAF, TR.TRA, and TR.TSa4 – TR.TSa8)
that, through the transmit Sa bit control register (TR.TSACR), can be programmed to insert Si and Sa data. Data is
sampled from these registers with the setting of the transmit multiframe bit in Status Register 2 (TR.SR4.4). The
host can use the TR.SR4.4 bit to know when to update these registers. It has 2ms to update the data or else the
old data is retransmitted. The MSB of each register is the first bit transmitted. See the register descriptions for
more details.
91 of 333
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
10.17 Additional HDLC Controllers in T1/E1/J1 Transceiver
This device has two enhanced HDLC controllers, HDLC #1 and HDLC #2. Each controller is configurable for use
with time slots, Sa4 to Sa8 bits (E1 mode), or the FDL (T1 mode). Each HDLC controller has 128-byte buffers in
the transmit and receive paths. When used with time slots, the user can select any time slot or multiple time slots,
contiguous or noncontiguous, as well as any specific bits within the time slot(s) to assign to the HDLC controllers.
The user must not map both transmit HDLC controllers to the same Sa bits, time slots or, in T1 mode, map both
controllers to the FDL. HDLC #1 and HDLC #2 are identical in operation and therefore the following operational
description refers only to a singular controller.
The HDLC controller performs the entire necessary overhead for generating and receiving performance report
messages (PRMs) as described in ANSI T1.403 and the messages as described in AT&T TR54016. The HDLC
controller automatically generates and detects flags, generates and checks the CRC check sum, generates and
detects abort sequences, stuffs and destuffs zeros, and byte aligns to the data stream. The 128-byte buffers in the
HDLC controller are large enough to allow a full PRM to be received or transmitted without host intervention.
The HDLC registers are divided into four groups: control/configuration, status/information, mapping, and FIFOs.
Table 10-12 lists these registers by group.
10.17.1 HDLC Configuration
The TR.HxTC and TR.HxRC registers perform the basic configuration of the HDLC controllers. Operating features
such as CRC generation, zero stuffer, transmit and receive HDLC mapping options, and idle flags are selected
here. These registers also reset the HDLC controllers.
92 of 333
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
Table 10-12. HDLC Controller Registers
REGISTER
FUNCTION
CONTROL AND CONFIGURATION
General control over the transmit HDLC controllers
TR.H1TC, HDLC #1 Transmit Control Register
TR.H2TC, HDLC #2 Transmit Control Register
General control over the receive HDLC controllers
TR.H1RC, HDLC #1 Receive Control Register
TR.H2RC, HDLC #2 Receive Control Register
Sets high watermark for receiver and low
TR.H1FC, HDLC #1 FIFO Control Register
watermark for transmitter
TR.H2FC, HDLC #2 FIFO Control Register
STATUS AND INFORMATION
Key status information for both transmit and
TR.SR6, HDLC #1 Status Register
receive directions
TR.SR7, HDLC #2 Status Register
Selects which bits in the status registers (SR7 and
TR.IMR6, HDLC #1 Interrupt Mask Register
SR8) cause interrupts
TR.IMR7, HDLC #2 Interrupt Mask Register
Information about HDLC controller
TR.INFO4, HDLC #1 and #2 Information Register
TR.INFO5, HDLC #1 Information Register
TR.INFO6, HDLC #2 Information Register
Indicates the number of bytes that can be read
TR.H1RPBA, HDLC #1 Receive Packet Bytes Available
from the receive FIFO
TR.H2RPBA, HDLC #2 Receive Packet Bytes Available
Indicates the number of bytes that can be written to
TR.H1TFBA, HDLC #1 Transmit FIFO Buffer Available
the transmit FIFO
TR.H2TFBA, HDLC #2 Transmit FIFO Buffer Available
MAPPING
Selects which channels are mapped to the receive
TR.H1RCS1, TR.H1RCS2, TR.H1RCS3, TR.H1RCS4,
HDLC controller
HDLC #1 Receive Channel Select Registers
TR.H2RCS1, TR.H2RCS2, TR.H2RCS3, TR.H2RCS4,
HDLC #2 Receive Channel Select Registers
Selects which bits in a channel are used or which
TR.H1RTSBS, HDLC #1 Receive TS/Sa Bit Select
Sa bits are used by the receive HDLC controller
TR.H2RTSBS, HDLC #2 Receive TS/Sa Bit Select
Selects which channels are mapped to the transmit
TR.H1TCS1, TR.H1TCS2, TR.H1TCS3, TR.H1TCS4,
HDLC controller
HDLC #1 Transmit Channel Select Registers
TR.H2TCS1, TR.H2TCS2, TR.H2TCS3, TR.H2TCS4,
HDLC #2 Transmit Channel Select Registers
Selects which bits in a channel are used or which
TR.H1TTSBS, HDLC # 1 Transmit TS/Sa Bit Select
Sa bits are used by the transmit HDLC controller
TR.H2TTSBS, HDLC # 2 Transmit TS/Sa Bit Select
FIFOs
Access to 128-byte receive FIFO
TR.H1RF, HDLC #1 Receive FIFO Register
TR.H2RF, HDLC #1 Receive FIFO Register
Access to 128-byte transmit FIFO
TR.H1TF, HDLC #1 Transmit FIFO Register
TR.H2TF, HDLC #2 Transmit FIFO Register
93 of 333
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
10.17.2
FIFO Control
The FIFO control register (TR.HxFC) controls and sets the watermarks for the transmit and receive FIFOs. Bits 3,
4, and 5 set the transmit low watermark and the lower 3 bits set the receive high watermark.
When the transmit FIFO empties below the low watermark, the TLWM bit in the appropriate HDLC status register
TR.SR6 or TR.SR7 is set. TLWM is a real-time bit and remains set as long as the transmit FIFO’s read pointer is
below the watermark. If enabled, this condition can also cause an interrupt through the INT pin.
When the receive FIFO fills above the high watermark, the RHWM bit in the appropriate HDLC status register is
set. RHWM is a real-time bit and remains set as long as the receive FIFO’s write pointer is above the watermark. If
enabled, this condition can also cause an interrupt through the INT pin.
94 of 333
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
10.17.3 HDLC Mapping
The HDLC controllers must be assigned a space in the T1/E1 bandwidth in which they transmit and receive data.
The controllers can be mapped to either the FDL (T1), Sa bits (E1), or to channels. If mapped to channels, then
any channel or combination of channels, contiguous or not, can be assigned to an HDLC controller. When
assigned to a channel(s), any combination of bits within the channel(s) can be avoided.
The TR.HxRCS1 – TR.HxRCS4 registers are used to assign the receive controllers to channels 1–24 (T1) or
1–32 (E1) according to the following table:
Register
Channels
TR.HxRCS1
TR.HxRCS2
TR.HxRCS3
TR.HxRCS4
1–8
9–16
17–24
25–32
The TR.HxTCS1 – TR.HxTCS4 registers are used to assign the transmit controllers to channels 1–24 (T1) or
1–32 (E1) according to the following table.
Register
Channels
TR.HxTCS1
TR.HxTCS2
TR.HxTCS3
TR.HxTCS4
1–8
9–16
17–24
25–32
95 of 333
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
10.17.4
FIFO Information
The transmit FIFO buffer-available register indicates the number of bytes that can be written into the transmit FIFO.
The count form this register informs the host as to how many bytes can be written into the transmit FIFO without
overflowing the buffer.
10.17.5
Receive Packet-Bytes Available
The lower 7 bits of the receive packet-bytes available register indicates the number of bytes (0 through 127) that
can be read from the receive FIFO. The value indicated by this register (lower seven bits) informs the host as to
how many bytes can be read from the receive FIFO without going past the end of a message. This value refers to
one of four possibilities: the first part of a packet, the continuation of a packet, the last part of a packet, or a
complete packet. After reading the number of bytes indicated by this register, the host then checks the HDLC
information register for detailed message status.
If the value in the TR.HxRPBA register refers to the beginning portion of a message or continuation of a message,
then the MSB of the TR.HxRPBA register returns a value of 1. This indicates that the host can safely read the
number of bytes returned by the lower seven bits of the TR.HxRPBA register, but there is no need to check the
information register since the packet has not yet terminated (successfully or otherwise).
10.17.5.1 Receive HDLC Code Example
The following is an example of a receive HDLC routine:
1) Reset receive HDLC controller.
2) Set HDLC mode, mapping, and high watermark.
3) Start new message buffer.
4) Enable RPE and RHWM interrupts.
5) Wait for interrupt.
6) Disable RPE and RHWM interrupts.
7) Read TR.HxRPBA register. N = TR.HxRPBA (lower 7 bits are byte count, MSB is status).
8) Read (N and 7Fh) bytes from receive FIFO and store in message buffer.
9) Read TR.INFO5 register.
10) If PS2, PS1, PS0 = 000, then go to Step 4.
11) If PS2, PS1, PS0 = 001, then packet terminated OK, save present message buffer.
12) If PS2, PS1, PS0 = 010, then packet terminated with CRC error.
13) If PS2, PS1, PS0 = 011, then packet aborted.
14) If PS2, PS1, PS0 = 100, then FIFO overflowed.
15) Go to Step 3.
96 of 333
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
10.18 Legacy FDL Support (T1 Mode)
10.18.1
Overview
To provide backward compatibility to the older DS21x52 T1 device, the transceiver maintains the circuitry that
existed in the previous generation of the T1 framer. In new applications, it is recommended that the HDLC
controllers and BOC controller described in Section 10.14 and 10.17 are used.
10.18.2
Receive Section
In the receive section, the recovered FDL bits or Fs bits are shifted bit-by-bit into the receive FDL register
(TR.RFDL). Because the TR.RFDL is 8 bits in length, it fills up every 2ms (8 x 250µs). The framer signals an
external microcontroller that the buffer has filled through the TR.SR8.3 bit. If enabled through TR.IMR8.3, the INT
pin toggles low, indicating that the buffer has filled and needs to be read. The user has 2ms to read this data
before it is lost. If the byte in the TR.RFDL matches either of the bytes programmed into the TR.RFDLM1 or
TR.RFDLM2 registers, then the TR.SR8.1 bit is set to a 1 and the INT pin toggles low if enabled through
TR.IMR8.1. This feature allows an external microcontroller to ignore the FDL or Fs pattern until an important event
occurs.
The framer also contains a zero destuffer, which is controlled through the TR.T1RCR2.3 bit. In both ANSI T1.403
and TR54016, communications on the FDL follows a subset of an LAPD protocol. The LAPD protocol states that
no more than five 1s should be transmitted in a row so that the data does not resemble an opening or closing flag
(01111110) or an abort signal (11111111). If enabled through TR.T1RCR2.3, the device automatically looks for five
1s in a row, followed by a 0. If it finds such a pattern, it automatically removes the zero. If the zero destuffer sees
six or more 1s in a row followed by a 0, the 0 is not removed. The TR.T1RCR2.3 bit should always be set to a 1
when the device is extracting the FDL. Refer to Application Note 335: DS2141A, DS2151 Controlling the FDL for
information about using the device in FDL applications in this legacy support mode.
97 of 333
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
10.18.3 Transmit Section
The transmit section shifts out into the T1 data stream either the FDL (in the ESF framing mode) or the Fs bits (in
the D4 framing mode) contained in the transmit FDL register (TR.TFDL). When a new value is written to TR.TFDL,
it is multiplexed serially (LSB first) into the proper position in the outgoing T1 data stream. After the full 8 bits have
been shifted out, the framer signals the host microcontroller by setting the TR.SR8.2 bit to a 1 that the buffer is
empty and that more data is needed. The INT also toggles low if enabled through TR.IMR8.2. The user has 2ms to
update TR.TFDL with a new value. If TR.TFDL is not updated, the old value in TR.TFDL is transmitted once again.
The framer also contains a zero stuffer that is controlled through the TR.T1TCR2.5 bit. In both ANSI T1.403 and
TR54016, communications on the FDL follows a subset of an LAPD protocol. The LAPD protocol states that no
more than five 1s should be transmitted in a row so that the data does not resemble an opening or closing flag
(01111110) or an abort signal (11111111). If enabled through TR.T1TCR2.5, the framer automatically looks for five
1s in a row. If it finds such a pattern, it automatically inserts a 0 after the five 1s. The TR.T1TCR2.5 bit should
always be set to a 1 when the framer is inserting the FDL.
10.19 D4/SLC-96 Operation
In the D4 framing mode, the framer uses the TR.TFDL register to insert the Fs framing pattern. To allow the device
to properly insert the Fs framing pattern, the TR.TFDL register at address C1h must be programmed to 1Ch and
the following bits must be programmed as shown:
TR.T1TCR1.2 = 0 (source Fs data from the TR.TFDL register)
TR.T1TCR2.6 = 1 (allow the TR.TFDL register to load on multiframe boundaries)
Since the SLC-96 message fields share the Fs-bit position, the user can access these message fields through the
TR.TFDL and TR.RFDL registers. Refer to Application Note 345: DS2141A, DS2151, DS2152 SLC-96 for a
detailed description about implementing an SLC-96 function.
98 of 333
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
10.20 Line Interface Unit (LIU)
The LIU contains three sections: the receiver that handles clock and data recovery, the transmitter that
waveshapes and drives the T1 line, and the jitter attenuator. These three sections are controlled by the line
interface control registers (LIC1–LIC4), which are described in the following sections. The LIU has its own T1/E1
mode-select bit and can operate independently of the framer function.
The transceiver can switch between T1 or E1 networks without changing external components on the transmit or
receive side. Figure 10-8 shows a network connection using minimal components. In this configuration, the
transceiver can connect to T1, J1, or E1 (75Ω or 120Ω) without component changes. The receiver can adjust the
120Ω termination to 100Ω or 75Ω. The transmitter can adjust its output impedance to provide high return-loss
characteristics for 120Ω, 100Ω, and 75Ω lines. Other components can be added to this configuration to meet
safety and network protection requirements (Section 10.24).
10.20.1 LIU Operation
The analog AMI/HDB3 waveform off the E1 line or the AMI/B8ZS waveform off of the T1 line is transformercoupled into the RTIP and RRING pins of the device. The user has the option to use internal termination, software
selectable for 75Ω/100Ω/120Ω applications, or external termination. The LIU recovers clock and data from the
analog signal and passes it through the jitter-attenuation mux outputting the received line clock at RDCLKO and
bipolar or NRZ data at RPOSO and RNEGO. The transceiver contains an active filter that reconstructs the analogreceived signal for the nonlinear losses that occur in transmission. The receive circuitry also is configurable for
various monitor applications. The device has a usable receive sensitivity of 0dB to -43dB for E1 and 0dB to -36dB
for T1, which allow the device to operate on 0.63mm (22AWG) cables up to 2.5km (E1) and 6k feet (T1) in length.
Data input at TPOSI and TNEGI is sent through the jitter-attenuation mux to the waveshaping circuitry and line
driver. The transceiver drives the E1 or T1 line from the TTIP and TRING pins through a coupling transformer. The
line driver can handle both CEPT 30/ISDN-PRI lines for E1 and long-haul (CSU) or short-haul (DSX-1) lines for T1.
10.20.2 Receiver
The receiver contains a digital clock recovery system. The device couples to the receive E1 or T1 twisted pair (or
coaxial cable in 75Ω E1 applications) through a 1:1 transformer. See Table 10-13 for transformer details. The
device has the option of using software-selectable termination requiring only a single fixed pair of termination
resistors.
The transceiver’s LIU is designed to be fully software selectable for E1 and T1, requiring no change to any external
resistors for the receive side. The receive side allows the user to configure the transceiver for 75Ω, 100Ω, or 120Ω
receive termination by setting the RT1 (TR.LIC4.1) and RT0 (TR.LIC4.0) bits. When using the internal termination
feature, the resistors labeled R in Figure 10-8 should be 60Ω each. If external termination is used, RT1 and RT0
should be set to 0 and the resistors labeled R in Figure 10-8 should be 37.5Ω, 50Ω, or 60Ω each, depending on
the line impedance.
There are two ranges of user-selectable receive sensitivity for T1 and E1. The EGL bit of TR.LIC1 (TR.LIC1.4)
selects the full or limited sensitivity. The resultant E1 or T1 clock derived from MCLK is multiplied by 16 through an
internal PLL and fed to the clock recovery system. The clock recovery system uses the clock from the PLL circuit to
form a 16-times over-sampler that is used to recover the clock and data. This over-sampling technique offers
outstanding performance to meet jitter tolerance specifications shown in Figure 10-11.
Normally, the clock that is output at the RCLKO pin is the recovered clock from the E1 AMI/HDB3 or T1 AMI/B8ZS
waveform presented at the RTIP and RRING inputs. If the jitter attenuator is placed in the receive path (as is the
case in most applications), the jitter attenuator restores the RCLKO to an approximate 50% duty cycle. If the jitter
attenuator is either placed in the transmit path or is disabled, the RCLKO output can exhibit slightly shorter high
cycles of the clock. This is because of the highly over-sampled digital-clock recovery circuitry. See the Receive AC
Timing Characteristics in Section 14.10 for more details. When no signal is present at RTIP and RRING, a receive
carrier loss (RCL) condition occurs and the RCLKO is derived from the JACLK source.
99 of 333
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
10.20.2.1 Receive Level Indicator and Threshold Interrupt
The device reports the signal strength at RTIP and RRING in 2.5dB increments through RL3–RL0 located in
Information Register 2 (TR.INFO2). This feature is helpful when trouble-shooting line-performance problems. The
device can initiate an interrupt whenever the input falls below a certain level through the input-level under-threshold
indicator (TR.SR1.7). Using the RLT0–RLT4 bits of the TR.CCR4 register, the user can set a threshold in 2.5dB
increments. The TR.SR1.7 bit is set whenever the input level at RTIP and RRING falls below the threshold set by
the value in RLT0–RLT4. The level must remain below the programmed threshold for approximately 50ms for this
bit to be set. The accuracy of the receive level indication is ±1 LSB (2.5dB) from +25°C to +85°C and ±2 LSBs
(5dB) from –40°C to +25°C.
10.20.2.2 Receive G.703 Synchronization Signal (E1 Mode)
The transceiver is capable of receiving a 2.048MHz square-wave synchronization clock as specified in Section 13
of ITU G.703, October 1998. In order to use the device in this mode, set the receive synchronization clock enable
(TR.LIC3.2) = 1.
10.20.2.3 Monitor Mode
Monitor applications in both E1 and T1 require various flat gain settings for the receive-side circuitry. The device
can be programmed to support these applications through the monitor mode control bits MM1 and MM0 in the
TR.LIC3 register (Figure 10-6).
Figure 10-6. Typical Monitor Application
PRIMARY
T1/E1 TERMINATING
DEVICE
T1/E1 LINE
Rm
Rm
X
F
M
R
MONITOR
PORT JACK
Rt
T1/E1
XCVR
SECONDARY T1/E1
TERMINATING
DEVICE
100 of 333
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
10.20.3 Transmitter
The transceiver uses a phase-lock loop along with a precision digital-to-analog converter (DAC) to create the
waveforms that are transmitted onto the E1 or T1 line. The waveforms created by the device meet the latest ETSI,
ITU, ANSI, and AT&T specifications. The user selects which waveform is generated by setting the ETS bit
(TR.LIC2.7) for E1 or T1 operation, then programming the L2/L1/L0 bits in register TR.LIC1 for the appropriate
application.
A 2.048MHz or 1.544MHz clock is required at TDCLKI for transmitting data presented at TPOSI and TNEGI.
Normally these pins are connected to TCLKO, TPOSO, and TNEGO. However, the LIU can operate in an
independent fashion. ITU specification G.703 requires an accuracy of ±50ppm for both T1 and E1. TR62411 and
ANSI specifications require an accuracy of ±32ppm for T1 interfaces. The clock can be sourced internally from
RCLKO or JACLK. See TR.LIC2.3, TR.LIC4.4, and TR.LIC4.5 for details. Because of the nature of the transmitter’s
design, very little jitter (less than 0.005UIP-P broadband from 10Hz to 100kHz) is added to the jitter present on
TCLKT. Also, the waveforms created are independent of the duty cycle of TCLKT. The transmitter in the device
couples to the E1 or T1 transmit twisted pair (or coaxial cable in some E1 applications) through a 1:2 step-up
transformer. For the device to create the proper waveforms, the transformer used must meet the specifications
listed in Table 10-13. The device has the option of using software-selectable transmit termination.
The transmit line drive has two modes of operation: fixed gain or automatic gain. In the fixed gain mode, the
transmitter outputs a fixed current into the network load to achieve a nominal pulse amplitude. In the automatic
gain mode, the transmitter adjusts its output level to compensate for slight variances in the network load. See the
Transmit Line Build-Out Control (TR.TLBC) register for details.
10.20.3.1 Transmit Short-Circuit Detector/Limiter
The device has an automatic short-circuit limiter that limits the source current to 50mA (RMS) into a 1Ω load. This
feature can be disabled by setting the SCLD bit (TR.LIC2.1) = 1. TCLE (TR.INFO2.5) provides a real-time
indication of when the current limiter is activated. If the current limiter is disabled, TCLE indicates that a shortcircuit condition exists. Status Register TR.SR1.2 provides a latched version of the information, which can be used
to activate an interrupt when enabled by the TR.IMR1 register. The TPD bit (TR.LIC1.0) powers down the transmit
line driver and three-states the TTIP and TRING pins.
10.20.3.2 Transmit Open-Circuit Detector
The device can also detect when the TTIP or TRING outputs are open circuited. TOCD (TR.INFO2.4) provides a
real-time indication of when an open circuit is detected. TR.SR1 provides a latched version of the information
(TR.SR1.1), which can be used to activate an interrupt when enabled by the TR.IMR1 register.
10.20.3.3 Transmit BPV Error Insertion
When IBPV (TR.LIC2.5) is transitioned from a 0 to a 1, the device waits for the next occurrence of three
consecutive 1s to insert a BPV. IBPV must be cleared and set again for another BPV error insertion.
10.20.3.4 Transmit G.703 Synchronization Signal (E1 Mode)
The transceiver can transmit the 2.048MHz square-wave synchronization clock as specified in Section 13 of ITU
G.703, October 1998. In order to transmit the 2.048MHz clock, when in E1 mode, set the transmit synchronization
clock enable (TR.LIC3.1) = 1.
101 of 333
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
10.21 MCLK Prescaler
A 16.384MHz, 8.192MHz, 4.096MHz, 2.048MHz, or 1.544MHz clock must be applied at MCLK. ITU specification
G.703 requires an accuracy of ±50ppm for both T1 and E1. TR62411 and ANSI specifications require an accuracy
of ±32ppm for T1 interfaces. A prescaler divides the 16MHz, 8MHz, or 4MHz clock down to 2.048MHz. There is an
on-board PLL for the jitter attenuator, which converts the 2.048MHz clock to a 1.544MHz rate for T1 applications.
Setting JAMUX (TR.LIC2.3) to a logic 0 bypasses this PLL.
10.22 Jitter Attenuator
The device contains an on-board jitter attenuator that can be set to a depth of either 32 or 128 bits through the
JABDS bit (TR.LIC1.2). The 128-bit mode is used in applications where large excursions of wander are expected.
The 32-bit mode is used in delay-sensitive applications. The characteristics of the attenuation are shown in Figure
10-13. The jitter attenuator can be placed in either the receive path or the transmit path by appropriately setting or
clearing the JAS bit (TR.LIC1.3). Setting the DJA bit (TR.LIC1.1) disables (in effect, removes) the jitter attenuator.
On-board circuitry adjusts either the recovered clock from the clock/data recovery block or the clock applied at the
TCLKT pin to create a smooth jitter-free clock that is used to clock data out of the jitter attenuator FIFO. It is
acceptable to provide a gapped/bursty clock at the TCLKT pin if the jitter attenuator is placed on the transmit side.
If the incoming jitter exceeds either 120UIP-P (buffer depth is 128 bits) or 28UIP-P (buffer depth is 32 bits), then the
transceiver divides the internal nominal 32.768MHz (E1) or 24.704MHz (T1) clock by either 15 or 17 instead of the
normal 16 to keep the buffer from overflowing. When the device divides by either 15 or 17, it also sets the jitter
attenuator limit trip (JALT) bit in Status Register 1 (TR.SR1.4).
10.23 CMI (Code Mark Inversion) Option
The device provides a CMI interface for connection to optical transports. This interface is a unipolar 1T2B signal
type. Ones are encoded as either a logical 1 or 0 level for the full duration of the clock period. Zeros are encoded
as a 0-to-1 transition at the middle of the clock period.
Figure 10-7. CMI Coding
CLOCK
DATA
1
1
0
1
0
0
1
CMI
Transmit and receive CMI are enabled through TR.LIC4.7. When this register bit is set, the TTIP pin outputs CMIcoded data at normal levels. This signal can be used to directly drive an optical interface. When CMI is enabled,
the user can also use HDB3/B8ZS coding. When this register bit is set, the RTIP pin becomes a unipolar CMI
input. The CMI signal is processed to extract and align the clock with data.
102 of 333
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
10.24 Recommended Circuits
Figure 10-8. Basic Interface
VDD
Transceiver
2:1
TTIP
TRANSMIT
LINE
C
DVDD
0.1µF 0.01µF
DVSS
TRING
1:1
RTIP
RECEIVE
LINE
TVDD
0.1µF
10µF
+
TVSS
RVDD
0.1µF 10µF
+
RRING RVSS
R
R
0.1µF
Note 1: All resistor values are ±1%.
Note 2: Resistors R should be set to 60Ω each if the internal receive-side termination feature is enabled. When
this feature is disabled, R = 37.5Ω for 75Ω coaxial E1 lines, 60Ω for 120Ω twisted-pair E1 lines, or 50Ω for
100Ω twisted-pair T1 lines.
Note 3: C = 1µF ceramic.
Refer to Application Note 324: T1/E1 Network Interface Design for more information on protected interfaces.
Table 10-13. Transformer Specifications
SPECIFICATION
Turns Ratio 3.3V Applications
Primary Inductance
Leakage Inductance
Intertwining Capacitance
Transmit Transformer DC Resistance
Primary (Device Side)
Secondary
Receive Transformer DC Resistance
Primary (Device Side)
Secondary
RECOMMENDED VALUE
1:1 (receive) and 1:2 (transmit) ±2%
600µH (min)
1.0µH (max)
40pF (max)
1.0Ω (max)
2.0Ω (max)
1.2Ω (max)
1.2Ω (max)
103 of 333
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
Figure 10-9. E1 Transmit Pulse Template
1.2
SCALED AMPLITUDE
(IN 75Ω SYSTEMS, 1.0 ON THE SCALE = 2.37VPEAK
IN 120Ω SYSTEMS, 1.0 ON THE SCALE = 3.00VPEAK)
1.1
269ns
1.0
0.9
0.8
0.7
G.703
TEMPLATE
194ns
0.6
0.5
219ns
0.4
0.3
0.2
0.1
0
-0.1
-0.2
-250
-200
-150
-100
-50
0
50
100
150
200
250
TIME (ns)
Figure 10-10. T1 Transmit Pulse Template
1.2
1.0
-0.77
-0.39
-0.27
-0.27
-0.12
0.00
0.27
0.35
0.93
1.16
0.9
0.8
0.7
NORMALIZED AMPLITUDE
MINIMUM CURVE
UI
Time Amp.
MAXIMUM CURVE
UI
Time Amp.
1.1
0.6
-500
-255
-175
-175
-75
0
175
225
600
750
Tr
60
0.80
1.15
1.15
1.05
1.05
-0.07
0.05
0.05
0.5
-0.77
-0.23
-0.23
-0.15
0.00
0.15
0.23
0.23
0.46
0.66
0.93
1.16
-500
-150
-150
-100
0
100
150
150
300
430
600
750
-0.05
-0.05
0.50
0.95
0.95
0.90
0.50
-0.45
-0.45
-0.20
-0.05
-0.05
0.4
0.3
0.2
0.1
0
-0.1
-0.2
-0.3
T1.102/87, T1.403,
CB 119 (OCT. 79), AND
I.431 TEMPLATE
-0.4
-0.5
-500
-400
-300
-200
-100
0
100
200
TIME (ns)
104 of 333
300
400
500
600
700
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
Figure 10-11. Jitter Tolerance
UNIT INTERVALS (UIP-P)
1k
DEVICE
TOLERANCE
100
TR 62411 (DEC. 90)
10
ITU-T G.823
1
0.1
1
10
100
1k
FREQUENCY (Hz)
10k
100k
Figure 10-12. Jitter Tolerance (E1 Mode)
UNIT INTERVALS (UIP-P)
1k
DEVICE
TOLERANCE
100
40
10
1.5
1
MINIMUM TOLERANCE
LEVEL AS PER
0.2
ITU G.823
0.1
1
10
20
100
1k
FREQUENCY (Hz)
105 of 333
2.4k
10k
18k
100k
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
Figure 10-13. Jitter Attenuation (T1 Mode)
-20dB
C
ve
ur
A
TR 62411 (Dec. 90)
Prohibited Area
-40dB
rve
Cu
JITTER ATTENUATION (dB)
0dB
B
T1 MODE
-60dB
1
10
100
1K
FREQUENCY (Hz)
10K
100K
Figure 10-14. Jitter Attenuation (E1 Mode)
JITTER ATTENUATION (dB)
0
TBR12
Prohibited
Area
ITU G.7XX
Prohibited Area
-20
-40
E1 MODE
-60
1
10
100
1k
FREQUENCY (Hz)
106 of 333
10k
100k
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
Figure 10-15. Optional Crystal Connections
XTALD
1.544MHz/2.048MHz
MCLK
C1
C2
NOTE 1: C1 AND C2 SHOULD BE 5PF LOWER THAN TWO TIMES THE NOMINAL LOADING
CAPACITANCE OF THE CRYSTAL TO ADJUST FOR THE INPUT CAPACITANCE OF THE DEVICE.
107 of 333
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
10.25 T1/E1/J1 Transceiver BERT Function
Each integrated T1/E1 transceiver contains a BERT. The BERT block can generate and detect pseudorandom and
repeating bit patterns. It is used to test and stress data communication links, and it is capable of generating and
detecting the following patterns:
The pseudorandom patterns 2E7, 2E11, 2E15, and QRSS
A repetitive pattern from 1 to 32 bits in length
Alternating (16-bit) words that flip every 1 to 256 words
Daly pattern
The BERT receiver has a 32-bit bit counter and a 24-bit error counter. The BERT receiver reports three events: a
change in receive synchronizer status, a bit error being detected, and if either the bit counter or the error counter
overflows. Each of these events can be masked within the BERT function through the BERT control register 1
(TR.BC1). If the software detects that the BERT has reported an event, then the software must read the BERT
information register (BIR) to determine which event(s) has occurred. To activate the BERT block, the host must
configure the BERT mux through the TR.BIC register.
10.25.1 BERT Status
TR.SR9 contains the status information on the BERT function. The host can be alerted through this register when
there is a BERT change-of-state. A major change-of-state is defined as either a change in the receive
synchronization (i.e., the BERT has gone into or out of receive synchronization), a bit error has been detected, or
an overflow has occurred in either the bit counter or the error counter. The host must read status register 9
(TR.SR9) to determine the change-of-state.
10.25.2 BERT Mapping
The BERT function can be assigned to the network direction or backplane direction through the direction control bit
in the BIC register (TR.BIC.1). See Figure 10-16 and Figure 10-17. The BERT also can be assigned on a perchannel basis. The BERT transmit control selector (BTCS) and BERT receive control selector (BRCS) bits of the
per-channel pointer register (TR.PCPR) are used to map the BERT function into time slots of the transmit and
receive data streams. In T1 mode, the user can enable mapping into the F-bit position for the transmit and receive
directions through the RFUS and TFUS bits in the BERT interface control (TR.BIC) register.
108 of 333
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
Figure 10-16. Simplified Diagram of BERT in Network Direction
TO RECEIVE
SYSTEM
BACKPLANE
INTERFACE
FROM RECEIVE
FRAMER
PER-CHANNEL AND
F-BIT (T1 MODE)
MAPPING
TO TRANSMIT
FRAMER
BERT
RECEIVER
BERT
TRANSMITTER
1
FROM TRANSMIT
SYSTEM
BACKPLANE
INTERFACE
0
Figure 10-17. Simplified Diagram of BERT in Backplane Direction
FROM RECEIVE
FRAMER
0
1
TO RECEIVE
SYSTEM
BACKPLANE
INTERFACE
PER-CHANNEL AND
F-BIT (T1 MODE)
MAPPING
BERT
RECEIVER
BERT
TRANSMITTER
FROM TRANSMIT
SYSTEM
BACKPLANE
INTERFACE
TO TRANSMIT
FRAMER
109 of 333
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
10.25.3 BERT Repetitive Pattern Set
These registers must be properly loaded for the BERT to generate and synchronize to a repetitive pattern, a
pseudorandom pattern, alternating word pattern, or a Daly pattern. For a repetitive pattern that is fewer than 32
bits, the pattern should be repeated so that all 32 bits are used to describe the pattern. For example, if the pattern
was the repeating 5-bit pattern …01101… (where the rightmost bit is the one sent first and received first), then
TR.BRP1 should be loaded with ADh, TR.BRP2 with B5h, TR.BRP3 with D6h, and TR.BRP4 with 5Ah. For a
pseudorandom pattern, all four registers should be loaded with all 1s (i.e., FFh). For an alternating word pattern,
one word should be placed into TR.BRP1 and TR.BRP2 and the other word should be placed into TR.BRP3 and
TR.BRP4. For example, if the DDS stress pattern “7E” is to be described, the user would place 00h in TR.BRP1,
00h in TR.BRP2, 7Eh in TR.BRP3, and 7Eh in TR.BRP4 and the alternating word counter would be set to 50
(decimal) to allow 100 bytes of 00h followed by 100 bytes of 7Eh to be sent and received.
10.25.4 BERT Bit Counter
The BERT Bit Counter is comprised of TR.BBC1, TR.BBC2, TR.BBC3, and TR.BBC4. Once BERT has achieved
synchronization, this 32-bit counter increments for each data bit (i.e., clock) received. Toggling the LC control bit in
TR.BC1 can clear this counter. This counter saturates when full and sets the BBCO status bit.
10.25.5 BERT Error Counter
The BERT Error Counter is comprised of TR.BEC1, TR.BEC2, and TR.BEC3. Once BERT has achieved
synchronization, this 24-bit counter increments for each data bit received in error. Toggling the LC control bit in
TR.BC1 can clear this counter. This counter saturates when full and sets the BECO status bit.
10.25.6 BERT Alternating Word-Count Rate
When the BERT is programmed in the alternating word mode, each word repeats for the count loaded into
TR.BAWC. One word should be placed into TR.BRP1 and TR.BRP2 and the other word should be placed into
TR.BRP3 and TR.BRP4.
110 of 333
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
10.26 Payload Error-Insertion Function (T1 Mode Only)
An error-insertion function is available in the transceiver and is used to create errors in the payload portion of the
T1 frame in the transmit path. This function is only available in T1 mode. Errors can be inserted over the entire
frame or the user can select which channels are to be corrupted. Errors are created by inverting the last bit in the
count sequence. For example, if the error rate 1 in 16 is selected, the 16th bit is inverted. F-bits are excluded from
the count and are never corrupted. Error rate changes occur on frame boundaries. Error-insertion options include
continuous and absolute number with both options supporting selectable insertion rates.
Table 10-14. Transmit Error-Insertion Setup Sequence
STEP
1
2A
or
2B
ACTION
Enter desired error rate in the TR.ERC register. Note: If TR.ER3 through TR.ER0 = 0,
no errors are generated even if the constant error-insertion feature is enabled.
For constant error insertion, set CE = 1 (TR.ERC.4).
For a defined number of errors:
– Set CE = 0 (TR.ERC.4)
– Load TR.NOE1 and TR.NOE2 with the number of errors to be inserted
– Toggle WNOE (TR.ERC.7) from 0 to 1 to begin error insertion
10.26.1 Number-of-Errors Registers
The number-of-error registers determine how many errors are generated. Up to 1023 errors can be generated. The
host loads the number of errors to be generated into the TR.NOE1 and TR.NOE2 registers. The host can also
update the number of errors to be created by first loading the prescribed value into the TR.NOE registers and then
toggling the WNOE bit in the error-rate control registers.
Table 10-15 Error Insertion Examples
VALUE
000h
001h
002h
3FFh
WRITE
Do not create any errors
Create a single error
Create two errors
Create 1023 errors
READ
No errors left to be inserted
One error left to be inserted
Two errors left to be inserted
1023 errors left to be inserted
10.26.2 Number of Errors Left Register
The host can read the NOELx registers at any time to determine how many errors are left to be inserted.
111 of 333
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
11
INTERLEAVED PCM BUS OPERATION
In many architectures, the PCM outputs of individual framers are combined into higher speed PCM buses to
simplify transport across the system backplane. The transceiver can be configured to allow PCM data to be
multiplexed into higher speed buses eliminating external hardware, saving board space and cost.
The 8.192MHz interleaved PCM bus option (IBO) allows four PCM data streams to share a common bus. See
Figure 11-1 for an example of four transceivers sharing a common 8.192MHz PCM bus. The receive elastic stores
of each transceiver must be enabled. Via the IBO register the user can configure each transceiver for a specific
bus position. For all IBO bus configurations each transceiver is assigned an exclusive position in the high-speed
PCM bus. The 8kHz frame sync can be generated from the system backplane or from the first device on the bus.
All other devices on the bus must have their frame syncs configured as inputs. Relative to this common frame
sync, the devices will await their turn to drive or sample the bus according to the settings of the DA0, DA1, and
DA2 bits of the TR.IBOC register.
11.1 Channel Interleave Mode
In channel interleave mode, data is output to the PCM data-out bus one channel at a time from each of the
connected devices until all channels of frame n from each device has been placed on the bus. This mode can be
used even when the transceivers are operating asynchronous to each other. The elastic stores will manage slip
conditions.
112 of 333
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
Figure 11-1. IBO Interconnection Example
Integrated
T1/E1 Transceivers
RSYSCLK1
TSYSCLK1
RSYNC1
TSSYNC1
Framer #1
TSERI1
Ethernet Mapper
RSERO1
8.192MHz System Clock In
RSYSCLK2
TSYSCLK2
RSYNC2
TSSYNC2
System 8kHz Frame Sync In
RCLKI
RBSYNC
TBSYNC
Transmit PCM Data
Framer #2
TSERI2
RSERO2
Receive PCM Data
RSYSCLK3
TSYSCLK3
RSYNC3
TSSYNC3
Framer #3
TSERI3
RSERO3
RSYSCLK4
TSYSCLK4
RSYNC4
TSSYNC4
Framer #4
TSERI4
RSERO4
113 of 333
TSERO
RSERI
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
11.2 Programmable Backplane Clock Synthesizer
The transceiver contains an on-chip clock synthesizer that generates a user-selectable clock output on the BPCLK
pin, referenced to the recovered receive clock (RCLKO). The synthesizer uses a phase-locked loop to generate
low-jitter clocks. Common applications include generation of port and backplane system clocks. The TR.CCR2
register is used to enable (TR.CCR2.0) and select (TR.CCR2.1 and TR.CCR2.2) the clock frequency of the BPCLK
pin.
11.3 Fractional T1/E1 Support
Fractional T1/E1 communication is supported on T1/E1 transceivers not being actively used for the transfer of
packet data. The user should take care to fill all unused timeslots on the RSERI pin with all 1s.
The T1/E1/J1 transceiver can be programmed to output gapped clocks for selected channels in the receive and
transmit paths to simplify connections into a USART or LAPD controller in fractional T1/E1 or ISDN-PRI
applications. The receive and transmit paths have independent enables. Channel formats supported include
56kbps and 64kbps. This is accomplished by assigning an alternate function to the RCHCLK and TCHCLK pins.
Setting TR.CCR3.0 = 1 causes the RCHCLK pin to output a gapped clock as defined by the receive fractional
T1/E1 function of the TR.PCPR register. Setting TR.CCR3.2 = 1 causes the TCHCLK pin to output a gapped clock
as defined by the transmit fractional T1/E1 function of the TR.PCPR register. TR.CCR3.1 and TR.CCR3.3 can be
used to select between 64kbps and 56kbps operation. See Section 10.2 for details about programming the perchannel function. In T1 mode no clock is generated at the F-bit position.
When 56kbps mode is selected, the LSB clock in the channel is omitted. Only the seven most significant bits of the
channel have clocks.
114 of 333
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
11.4 T1/E1/J1 Transmit Flow Diagrams
Figure 11-2. T1/J1 Transmit Flow Diagram
TSIG
TSERI
T1 TRANSMIT
FLOW
DIAGRAM
Hardware
Signaling
HSIE1-3
through
PCPR
TX
ESTORE
KEY
- PIN
Estore Mux
ESCR.4 TESE
- SELECTOR
TESO
Off-Chip
Connection
RDATA
From
T1_rcv_logic
- REGISTER
TDATA
LBCR1.1 PLB
Payload
Loopback
HDLC
Engine
#1
TLINK
H1TC.4
THMS1
HDLC FDL #1
THMS1 H1TC.4
H1TCS1-3
H1TTSBS
HDLC Mux #1
HDLC
Engine
#2
H2TC.4
THMS2
TFDL
T1TCR2.5
TZSE
THMS2 H2TC.4
H2TCS1-3
HDLC Mux #2
HDLC FDL #2
H2TTSBS
Idle
Code
Array
Tx FDL
Zero
Stuffer
TCICE1-3
Idle Code Mux
T1TCR1.2
TFDLS
FDL Mux
TFDL
Loop
Code
Gen
BOC
Engine
BOCC.0 SBOC
Loop Code
BOC Mux
T1CCR1.2 TFM
T1TCR2.2 TD4YM
T1TCR1.0 TYEL
D4 12th Fs
Yellow
alarm
ESF Yellow
Alarm
FPS or
Ft/Fs
insertion
Per-Channel
Loopback
To FDL Mux
115 of 333
PCLR1-3
Software
Sig
Registers
Software Sig
F-bit Mux
To ESF Yellow
Mux
TLOOP T1CCR1.0
To FDL Mux
SSIE1-3
TFPT T1TCR1.5
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
From ESF
Yellow Alarm
From BOC Mux
From F-bit Mux
TFPT T1TCR1.5
FDL Mux
TFM T1CCR1.2
ESF Yellow
TYEL T1TCR1.0
CRC Mux
TCPT T1TCR1.5
D4 bit 2
Yellow
Alm
BERT
Engine
TFM T1CCR1.2
TD4YM T1TCR2.2
TYEL T1TCR1.0
TFUS BIC.3
F-bit
BERT Mux
T1TCR2.3 FBCT1
T1TCR2.4 FBCT2
F-bit
Corruption
BTCS1-3
Payload
error
insertion
NOEL != 0
ERC.4 CE
BERTEN
BIC.0
PEICS1-3
SSIE1-3
Bit 7
stuffing
T1CCR1.1 PDE
GB7S T1TCR1.3
B7SE T1TCR2.0
Pulse
Density
Enforcer
TPDV INFO1.6
DS0
Monitor
CRC
Calculation
B8ZS
Encoding
T1TCR2.7 B8ZSE
T1TCR1.1 TBL
Blue
Alarm
IOCR1.0 ODF
Bipolar/
NRZ
coding
1/2 CLK/
FULL CLK
CCR1.4 ODM
TPOS
TNEG
116 of 333
TCM0-4 TDS0SEL.0 - .3
TDSOM
from PCPR
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
Figure 11-3. E1 Transmit Flow Diagram
E1 TRANSMIT
FLOW
DIAGRAM
TSIG
TSERI
Hardware
Signaling
HSIE1-4
through
PCPR
TX
ESTORE
Estore Mux
ESCR.4 TESE
TESO
Off-Chip
Connection
TDATA
RDATA
From
E1_rcv_logic
Payload
Loopback Mux
LBCR1.1 PLB
HDLC
Engine
#1
THMS1 H1TC.4
HDLC DS0
Mux #1
H1TCS1-4
H1TTSBS
THMS1 H1TC.4
HDLC Sa-bit
Mux #1
T1SaBE4T1SaBE8
H1TTSBS.4 - H1TTSBS.0
HDLC
Engine #2
THMS2 H2TC.4
H2TCS1-4
H2TTSBS
HDLC DS0
Mux #2
KEY
THMS2 H2TC.4
HDLC Sa-bit
Mux #2
T2SaBE4-T2SaBE8
- PIN
- SELECTOR
- REGISTER
H2TTSBS.4 - H2TTSBS.0
BERT
Engine
BERTEN (BIC.0)
BERT Mux
BTCS1-4
Idle Code
Array
Idle Code MUX
TCICE1-4
To Per-Channel Mux
117 of 333
from PCPR
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
From Idle
Code Mux
RDATA
From E1_rcv_logic
Per-Channel
Loopback
E1 TRANSMIT
FLOW
DIAGRAM
PCLR1-4
TNAF
THMS1
Sa-bit Mux
TS0 Mux
E1TCR1.4 TSIS
H1TC.4
THMS2 H2TC.4
TAF/TNAF(non Sa)
TFPT E1TCR1.7
Si-bit Mux
Si = CRC4 MF Align Word
(Does not overwrite E-bits)
E1TCR1.0 TCRC4
E1TCR2.2 AEBE
Sa4S - Sa8S
E1TCR2.5 - E1TCR2.7
E1TCR2.8 ARA
TSaCR
Si/CRC4 Mux
TLINK
Auto Ebit Gen
TLINK Mux
TSiAF
TSiNAF
TRA
TSa4
Auto
RA Gen
TSa5
TSa6
TSa7
TSa8
TSaCR Mux
TSA1 E1TCR1.3
SSIE1-4
E1TCR1.0 T16S
Software Sig
E1TCR1.0 TCRC4
CRC
Calculate
CCR1.6 CRC4R
CRC Recalculate
E1TCR2.1 AAIS
Auto
AIS
Gen
E1TCR1.5 TUA1
UA1
Gen
E1TCR1.2 THDB3
TS1-16
TDS0SEL.0 - TDS0SEL.4
TCM0-TCM4
DS0
Monitor
HDB3
Encoding
To Bipolar/NRZ
coding Mux
118 of 333
TDSOM
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
12 DEVICE REGISTERS
Ten address lines are used to address the register space. The register Map for the device is shown in Table 12-1.
The addressable range for the device is 0000h to 08FFh. Each Register Section is 64 bytes deep. Global Registers
are preserved for software compatibility with multiport devices. The Serial Interface (Line) Registers are used to
configure the serial port and the associated transport protocol. The Ethernet Interface (Subscriber) registers are
used to control and observe the Ethernet port. The registers associated with the MAC must be configured through
indirect register write /read access due to the architecture of the device.
When writing to a register input values for unused bits and registers (those designated with “–“) should be zero
unless specifically noted otherwise, as these bits and registers are reserved. When a register is read from, the
values of the unused bits and registers should be ignored. A latched status bit is set when an event happens and is
cleared when read.
The register details are provided in the following tables.
Table 12-1. Register Address Map
MAPPER/
PORT
CHIP
SELECT
GLOBAL
REGISTERS
ARBITER
Ethernet
Mapper
CS=0,
CST=1
0000h–
003Fh
0040h–
007Fh
Ethernet
Mapper
CS=0,
CST=1
T1/E1/J1
Port 1 *
CS=1,
CST=0
0DBh–
0EFh
000h–0FFh
T1/E1/J1
Port 2
CS=1,
CST=0
1DBh–
1EFh
100h–1FFh
T1/E1/J1
Port 3
CS=1,
CST=0
2DBh–
2EFh
200h–2FFh
T1/E1/J1
Port 4
CS=1,
CST=0
3DBh–
BERT
3EFh
119 of 333
SERIAL
INTERFACE
ETHERNET
INTERFACE
00C0h–
013Fh
0140h–
017Fh
T1/E1/J1
TRANSCEIVERS
300h–3FFh
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
12.1 Register Bit Maps
Table 12-2, Table 12-3, Table 12-3, Table 12-4, Table 12-5, and Table 12-6 contain the registers of the device. Bits
that are reserved are noted with a single dash “-“. All registers not listed are reserved and should be initialized with
a value of 00h for proper operation, unless otherwise noted.
12.1.1 Global Register Bit Map
Table 12-2. Global Ethernet Mapper Register Bit Map
ADDR
000h
BIT 7
BIT 6
BIT 5
BIT 4
BIT 3
BIT 2
BIT 1
BIT 0
GL.IDRL
Name
ID07
ID06
ID05
ID04
ID03
ID02
ID01
ID00
001h
GL.IDRH
ID15
ID14
ID13
ID12
ID11
ID10
ID09
ID08
002h
GL.CR1
-
-
-
-
-
REF_CLKO
INTM
RST
003h
Reserved
-
-
-
-
-
-
-
-
004h
GL.RTCAL
-
-
-
RLCALS1
-
-
-
TLCALS1
005h
GL.SRCALS
-
-
-
-
-
-
REFCLKS
SYSCLS
006h
GL.LIE
-
-
-
LIN1TIE
-
-
-
LIN1RIE
007h
GL.LIS
-
-
-
LIN1TIS
-
-
-
LIN1RIS
008h
GL.SIE
-
-
-
-
-
-
-
SUB1IE
009h
GL.SIS
-
-
-
-
-
-
-
SUB1IS
00Ah
GL.TRQIE
-
-
-
TQ1IE
-
-
-
RQ1IE
00Bh
GL.TRQIS
-
-
-
TQ1IS
-
-
-
RQ1IS
00Ch
GL.IBIE
-
-
-
-
-
-
IMUXIE
BIE
00Dh
GL.IBIS
-
-
-
-
-
-
IIS
BIS
00Eh
GL.CON1
-
-
-
-
-
-
-
LINE1[0]
012h
GL.C1QPR
-
-
-
-
C1MRPR
C1HWPR
C1MHPR
C1HRPR
016h
GL.IMXCN
-
T1E1
RXE
SENDE
L4
L3
L2
L1
017h
GL.IMXC
IMUXC7
IMUXC6
IMUXC5
IMUXC4
IMUXC3
IMUXC2
IMUXC1
IMUXC0
018h
GL.IMXSS
ITSYNC4
ITSYNC3
ITSYNC2
ITSYNC1
IRSYNC4
IRSYNC3
IRSYNC2
IRSYNC1
019h
GL.IMXSIE
ITSYNCIE4
ITSYNCIE3
ITSYNCIE2
01Ah
GL.IMXSLS
ITSYNCLS4 ITSYNCLS3 ITSYNCLS2 ITSYNCLS1 IRSYNCLS4 IRSYNCLS3 IRSYNCLS2 IRSYNCLS1
01Bh
GL.IMXDFD
IMUXDFD7
IMUXDFD6
IMUXDFD5
IMUXDFD4
IMUXDFD3
IMUXDFD2
IMUXDFD1
IMUXDFD0
01Ch
GL.IMXDFEIE
-
-
-
-
-
-
-
IDDEIE0
01Dh
GL.IMXDFDELS
-
-
-
-
-
-
-
IDDELS0
01Eh
GL.IMXOOFIE
01Fh
GL.IMXOOFLS
020h
GL.BISTEN
021h
GL.BISTPF
-
-
-
-
038h
GL.LSMRRFD
-
-
FD1
FD0
03Ah
GL.SDMODE1
-
-
-
-
WT
03Bh
GL.SDMODE2
-
-
-
-
-
03Ch
GL.SDMODEWS
-
-
-
-
-
-
-
SDMW
03Dh
GL.SDRFTC
SREFT7
SREFT6
SREFT5
SREFT4
SREFT3
SREFT2
SREFT1
SREFT0
ITSYNCIE1 IRSYNCIE4 IRSYNCIE3 IRSYNCIE2 IRSYNCIE1
TOOFIE4
TOOFIE3
TOOFIE2
TOOFIE1
ROOFIE4
ROOFIE3
ROOFIE2
ROOFIE1
TOOFLS4
TOOFLS3
TOOFLS2
TOOFLS1
ROOFL4
ROOFL3
ROOFLS2
ROOFLS1
-
-
-
-
-
-
-
BISTE
-
-
BISTDN
BISTPF
All unlisted registers in the range of 000h - 03Fh are reserved.
120 of 333
LSMRC3 LSMRC2 LSMRC1 LSMRC0
BL2
BL1
BL0
LTMOD2 LTMOD1 LTMOD0
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
12.1.2 Arbiter Register Bit Map
Table 12-3. Arbiter Register Bit Map
ADDR
040h
BIT 7
BIT 6
BIT 5
BIT 4
BIT 3
BIT 2
BIT 1
BIT 0
AR.RQSC1
NAME
RQSC1[7]
RQSC1[6]
RQSC1[5]
RQSC1[4]
RQSC1[3]
RQSC1[2]
RQSC1[1]
RQSC1[0]
041h
AR.TQSC1
TQSC1[7]
TQSC1[6]
TQSC1[5]
TQSC1[4]
TQSC1[3]
TQSC1[2]
TQSC1[1]
TQSC1[0]
121 of 333
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
12.1.3 Serial Interface Register Bit Map
Table 12-4. Serial Interface Register Bit Map
ADDR
NAME
0C0h Reserved
BIT 7
-
BIT 6
-
BIT 5
-
BIT 4
-
BIT 3
-
BIT 2
-
BIT 1
-
BIT 0
-
0C1h LI.RSTPD
-
-
-
-
-
-
RESET
-
0C2h LI.LPBK
-
-
-
-
-
-
-
QLP
0C3h Reserved
-
-
-
-
-
-
-
-
0C4h LI.TPPCL
-
-
TFAD
TF16
TIFV
TSD
TBRE
-
0C5h LI.TIFGC
TIFG7
TIFG6
TIFG5
TIFG4
TIFG3
TIFG2
TIFG1
TIFG0
0C6h LI.TEPLC
TPEN7
TPEN6
TPEN5
TPEN4
TPEN3
TPEN2
TPEN1
TPEN0
0C7h LI.TEPHC
MEIMS
TPER6
TPER5
TPER4
TPER3
TPER2
TPER1
TPER0
0C8h LI.TPPSR
-
-
-
-
-
-
-
TEPF
0C9h LI.TPPSRL
-
-
-
-
-
-
-
TEPFL
0CAh LI.TPPSRIE
-
-
-
-
-
-
-
TEPFIE
0CBh Reserved
-
-
-
-
-
-
-
-
0CCh LI.TPCR0
TPC7
TPC6
TPC5
TPC4
TPC3
TPC2
TPC1
TPC0
0CDh LI.TPCR1
TPC15
TPC14
TPC13
TPC12
TPC11
TPC10
TPC9
TPC8
0CEh LI.TPCR2
TPC23
TPC22
TPC21
TPC20
TPC19
TPC18
TPC17
TPC16
0CFh Reserved
-
-
-
-
-
-
-
-
0D0h LI.TBCR0
TBC7
TBC6
TBC5
TBC4
TBC3
TBC2
TBC1
TBC0
0D1h LI.TBCR1
TBC15
TBC14
TBC13
TBC12
TBC11
TBC10
TBC9
TBC8
0D2h LI.TBCR2
TBC23
TBC22
TBC21
TBC20
TBC19
TBC18
TBC17
TBC16
0D3h LI.TBCR3
TBC31
TBC30
TBC29
TBC28
TBC27
TBC26
TBC25
TBC24
0D4h LI.TMEI
-
-
-
-
-
-
-
TMEI
0D5h Reserved
-
-
-
-
-
-
-
-
0D6h LI.THPMUU
-
-
-
-
-
-
-
TPMUU
0D7h LI.THPMUS
-
-
-
-
-
-
-
TPMUS
0D8h LI.TX86EDE
-
-
-
-
-
-
-
X86ED
0D9h LI.TRX86A
X86TRA7 X86TRA6 X86TRA5 X86TRA4 X86TRA3 X86TRA2 X86TRA1 X86TRA0
0DAh LI.TRX8C
X86TRC7 X86TRC6 X86TRC5 X86TRC4 X86TRC3 X86TRC2 X86TRC1 X86TRC0
0DBh
LI.TRX86SAPIH TRSAPIH7 TRSAPIH6 TRSAPIH5 TRSAPIH4 TRSAPIH3 TRSAPIH2 TRSAPIH1 TRSAPIH0
0DCh
LI.TRX86SAPIL TRSAPIL7 TRSAPIL6 TRSAPIL5 TRSAPIL4 TRSAPIL3 TRSAPIL2 TRSAPIL1 TRSAPIL0
0DDh LI.CIR
CIRE
CIR6
CIR5
CIR4
CIR3
CIR2
CIR1
CIR0
100h Reserved
-
-
-
-
-
-
-
-
101h LI.RPPCL
-
-
RFPD
RF16
RFED
RDD
RBRE
RCCE
102h LI.RMPSCL
RMX7
RMX6
RMX5
RMX4
RMX3
RMX2
RMX1
RMX0
103h LI.RMPSCH
RMX15
RMX14
RMX13
RMX12
RMX11
RMX10
RMX9
RMX8
122 of 333
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
NAME
ADDR
104h LI.RPPSR
BIT 7
-
BIT 6
-
BIT 5
-
BIT 4
-
BIT 3
-
BIT 2
REPC
BIT 1
RAPC
BIT 0
RSPC
105h LI.RPPSRL
REPL
RAPL
RIPDL
RSPDL
RLPDL
REPCL
RAPCL
RSPCL
106h LI.RPPSRIE
REPIE
RAPIE
RIPDIE
RSPDIE
RLPDIE
REPCIE
RAPCIE
RSPCIE
108h LI.RPCB0
RPC7
RPC6
RPC5
RPC4
RPC3
RPC2
RPC1
RPC0
109h LI.RPCB1
RPC15
RPC14
RPC13
RPC12
RPC11
RPC10
RPC09
RPC08
10Ah LI.RPCB2
RPC23
RPC22
RPC21
RPC20
RPC19
RPC18
RPC17
RPC16
10Ch LI.RFPCB0
RFPC7
RFPC6
RFPC5
RFPC4
RFPC3
RFPC2
RFPC1
RFPC0
10Dh LI.RFPCB1
RFPC15
RFPC14
RFPC13
RFPC12
RFPC11
RFPC10
RFPC9
RFPC8
10Eh LI.RFPCB2
RFPC23
RFPC22
RFPC21
RFPC20
RFPC19
RFPC18
RFPC17
RFPC16
110h LI.RAPCB0
RAPC7
RAPC6
RAPC5
RAPC4
RAPC3
RAPC2
RAPC1
RAPC0
111h LI.RAPCB1
RAPC15
RAPC14
RAPC13
RAPC12
RAPC11
RAPC10
RAPC9
RAPC8
112h LI.RAPCB2
RAPC23
RAPC22
RAPC21
RAPC20
RAPC19
RAPC18
RAPC17
RAPC16
-
-
-
-
-
-
-
-
114h LI.RSPCB0
RSPC7
RSPC6
RSPC5
RSPC4
RSPC3
RSPC2
RSPC1
RSPC0
115h LI.RSPCB1
RSPC15
RSPC14
RSPC13
RSPC12
RSPC11
RSPC10
RSPC9
RSPC8
116h LI.RSPCB2
RSPC23
RSPC22
RSPC21
RSPC20
RSPC19
RSPC18
RSPC17
RSPC16
118h LI.RBC0
RBC7
RBC6
RBC5
RBC4
RBC3
RBC2
RBC1
RBC0
119h LI.RBC1
RBC15
RBC14
RBC13
RBC12
RBC11
RBC10
RBC9
RBC8
11Ah LI.RBC2
RBC23
RBC22
RBC21
RBC20
RBC19
RBC18
RBC17
RBC16
11Bh LI.RBC3
RBC31
RBC30
RBC29
RBC28
RBC27
RBC26
RBC25
RBC24
11Ch LI.RAC0
REBC7
REBC6
REBC5
REBC4
REBC3
REBC2
REBC1
REBC0
11Dh LI.RAC1
REBC15
REBC14
REBC13
REBC12
REBC11
REBC10
REBC9
REBC8
11Eh LI.RAC2
REBC23
REBC22
REBC21
REBC20
REBC19
REBC18
REBC17
REBC16
11Fh LI.RAC3
REBC31
REBC30
REBC29
REBC28
REBC27
REBC26
REBC25
REBC24
120h LI.RHPMUU
-
-
-
-
-
-
-
RPMUU
121h LI.RHPMUS
-
-
-
-
-
-
-
RPMUUS
122h LI.RX86S
-
-
-
-
SAPIHNE SAPILNE
CNE
ANE
123h LI.RX86LSIE
-
-
-
-
SAPINE01IM
SAPINEFEIM
124h LI.TQLT
TQLT7
TQLT6
TQLT5
TQLT4
TQLT3
TQLT2
TQLT1
TQLT0
125h LI.TQHT
TQHT7
TQHT6
TQHT5
TQHT4
TQHT3
TQHT2
TQHT1
TQHT0
126h LI.TQTIE
-
-
-
-
TFOVFIE TQOVFIE TQHTIE
TQLTIE
127h LI.TQCTLS
-
-
-
-
TFOVFLS TQOVFLS TQHTLS
TQLTLS
107h Reserved
10Fh Reserved
113h Reserved
0DEh – 0FFh, 128h – 13Fh are reserved.
123 of 333
CNE3LIM ANE4IM
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
12.1.4 Ethernet Interface Register Bit Map
Table 12-5. Ethernet Interface Register Bit Map
ADDR
140h
141h
142h
143h
144h
145h
146h
147h
148h
149h
14Ah
14Bh
14Ch
14Dh
14Eh
14Fh
150h
151h
152h
153h
154h
155h
156h
157h
158h
159h
15Ah
15Bh
15Ch
15Dh
15Eh
NAME
SU.MACRADL
BIT 7
MACRA7
BIT 6
MACRA6
BIT 5
MACRA5
BIT 4
MACRA4
BIT 3
MACRA3
BIT 2
MACRA2
BIT 1
MACRA1
BIT 0
MACRA0
SU.MACRADH
MACRA15
MACRA14
MACRA13
MACRA12
MACRA11
MACRA10
MACRA09
MACRA08
SU.MACRD0
MACRD7
MACRD6
MACRD5
MACRD4
MACRD3
MACRD2
MACRD1
MACRD0
SU.MACRD1
MACRD15
MACRD14
MACRD13
MACRD12
MACRD11
MACRD10
MACRD9
MACRD8
SU.MACRD2
MACRD23
MACRD22
MACRD21
MACRD20
MACRD19
MACRD18
MACRD17
MACRD16
SU.MACRD3
MACRD31
MACRD30
MACRD29
MACRD28
MACRD27
MACRD26
MACRD25
MACRD24
SU.MACWD0
MACWD7
MACWD6
MACWD5
MACWD4
MACWD3
MACWD2
MACWD1
MACWD0
SU.MACWD1
MACWD15
MACWD14
MACWD13
MACWD12
MACWD11
MACWD10
MACWD09
MACWD08
SU.MACWD2
MACWD23
MACWD22
MACWD21
MACWD20
MACWD19
MACWD18
MACWD17
MACWD16
SU.MACWD3
MACD31
MACD30
MACD29
MACD28
MACD27
MACD26
MACD25
MACD24
SU.MACAWL
MACAW 7
MACAW 6
MACAW 5
MACAW4
MACAW3
MACAW2
MACAW1
MACAW0
SU.MACAWH
MACAW 15
MACAW 14
MACAW 13
MACAW12
MACAW11
MACAW10
MACAW9
MACAW8
SU.MACRWC
-
-
-
-
-
-
MCRW
MCS
RESERVED
-
-
-
-
-
-
-
-
RESERVED
-
-
-
-
-
-
-
-
SU.LPBK
-
-
-
-
-
-
-
QLP
SU.GCR
-
-
-
-
CRCS
H10S
ATFLOW
JAME
SU.TFRC
-
-
-
-
NCFQ
TPDFCB
TPRHBC
TPRCB
SU.TFSL
UR
EC
LC
ED
LOC
NOC
-
FABORT
SU.TFSH
PR
HBF
CC3
CC2
CC1
CC0
LCO
DEF
SU.RFSB0
FL7
FL6
FL5
FL4
FL3
FL2
FL1
Fl0
SU.RFSB1
RF
WT
FL13
FL12
FL11
FL10
FL9
Fl8
SU.RFSB2
-
-
CRCE
DB
MIIE
FT
CS
FTL
SU.RFSB3
MF
-
-
BF
MCF
UF
CF
LE
SU.RMFSRL
RMPS7
RMPS6
RMPS5
RMPS4
RMPS3
RMPS2
RMPS1
RMPS0
SU.RMFSRH
RMPS08
RMPS15
RMPS14
RMPS13
RMPS12
RMPS11
RMPS10
RMPS09
SU.RQLT
RQLT7
RQLT6
RQLT5
RQLT4
RQLT3
RQLT2
RQLT1
RQLT0
SU.RQHT
RQHT7
RQHT6
RQHT5
RQHT4
RQHT3
RQHT2
RQHT1
RQHT0
SU.QRIE
-
-
-
-
RFOVFIE
RQVFIE
RQLTIE
RQHTIE
SU.QCRLS
-
-
-
-
RFOVFLS
RQOVFLS
RQHTLS
RQLTLS
-
UCFR
CFRR
LERR
CRCERR
DBR
MIIER
BFR
SU.RFRC
15Fh – 17Fh are reserved.
124 of 333
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
12.1.5 MAC Register Bit Map
Table 12-6. MAC Indirect Register Bit Map
ADDR
0000h
0001h
0002h
0003h
0004h
0005h
0006h
0007h
0008h
0009h
000Ah
000Bh
000Ch
000Dh
000Eh
000Fh
0010h
0011h
0012h
0013h
0014h
0015h
0016h
0017h
0018h
0019h
001Ah
001Bh
001Ch
001Dh
001Eh
001Fh
100h
101h
102h
103h
10Ch
10Dh
10Eh
10Fh
NAME
BIT 7
SU.MACCR
31:24
23:16
DRO
15:8
7:0
BOLMT1
SU.MACAH
31:24
23:16
15:8
PADR47
7:0
PADR39
SU.MACAL PADR31
31:24
23:16
PADR23
15:8
PADR15
7:0
PADR07
Reserved
Reserved
Reserved
Reserved
Reserved
Reserved
Reserved
Reserved
SU.MACMIIA
31:24
23:16
15:8
PHYA4
7:0
MIIA1
SU.MACMIID
31:24
23:16
15:8
MIID15
7:0
MIID07
SU.MACFCR
PT15
31:24
23:16
PT07
15:8
7:0
SU.MMCCTRL
31:24
23:16
15:8
7:0
RESERVED –
initialize to FF
RESERVED –
initialize to FF
RESERVED –
initialize to FF
RESERVED –
initialize to FF
BIT 6
-
BIT 5
-
BIT 4
HDB
BIT 3
PS
BIT 2
-
BIT 1
-
BIT 0
-
OML1
BOLMT0
-
OML0
DC
-
F
LCC
-
TE
-
DRTY
RE
-
ASTP
-
PADR46
PADR38
PADR30
PADR45
PADR37
PADR29
PADR44
PADR36
PADR28
PADR43
PADR35
PADR27
PADR42
PADR34
PADR26
PADR41 PADR40
PADR33 PADR32
PADR25 PADR24
PADR22
PADR14
PADR06
-
PADR21
PADR13
PADR05
-
PADR20
PADR12
PADR04
-
PADR19
PADR11
PADR03
-
PADR18
PADR10
PADR02
-
PADR17 PADR16
PADR09 PADR08
PADR01 PADR00
-
PHYA3
MIIA0
-
PHYA2
-
PHYA1
-
PHYA0
-
MIIA4
-
MIIA3
MIIW
-
MIIA2
MIIB
-
MIID14
MIID06
PT14
MIID13
MIID05
PT13
MIID12
MIID04
PT12
MIID11
MIID03
PT11
MIID10
MIID02
PT10
MIID09
MIID01
PT09
MIID08
MIID00
PT08
-
PT06
-
PT05
-
PT04
-
PT03
-
PT02
PCF
-
PT01
FCE
-
PT00
FCB
-
-
-
MXFRM4
-
-
-
-
-
-
-
MXFRM9
MXFRM1
MXFRM8
MXFRM0
MXFRM7
MXFRM6
MXFRM5
MXFRM3
MXFRM10
MXFRM2
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
125 of 333
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
ADDR
110h
111h
112h
113h
200h
201h
202h
203h
204h
205h
206h
207h
300h
301h
302h
303h
308h
309h
30Ah
30Bh
30Ch
30Dh
30Eh
30Fh
334h
335h
336h
337h
338h
339h
33Ah
33Bh
NAME
RESERVED –
initialize to FF
RESERVED –
initialize to FF
RESERVED –
initialize to FF
RESERVED –
initialize to FF
SU.RxFrmCtr
31:24
23:16
15:8
7:0
SU.RxFrmOKCtr
BIT 7
-
BIT 6
-
BIT 5
-
BIT 4
-
BIT 3
-
BIT 2
-
BIT 1
-
BIT 0
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
RXFRMC31 RXFRMC30 RXFRMC29 RXFRMC28 RXFRMC27 RXFRMC26 RXFRMC25 RXFRMC24
RXFRMC23 RXFRMC22 RXFRMC21 RXFRMC20 RXFRMC19 RXFRMC18 RXFRMC17 RXFRMC16
RXFRMC15 RXFRMC14 RXFRMC13 RXFRMC12 RXFRMC11 RXFRMC10 RXFRMC9 RXFRMC8
RXFRMC7 RXFRMC6 RXFRMC5 RXFRMC4 RXFRMC3 RXFRMC2 RXFRMC1 RXFRMC0
RXFRMOK31
RXFRMOK30
RXFRMOK29
RXFRMOK28
RXFRMOK27
RXFRMOK26
RXFRMOK25
RXFRMOK24
RXFRMOK23
RXFRMOK22
RXFRMOK21
RXFRMOK20
RXFRMOK19
RXFRMOK18
RXFRMOK17
RXFRMOK16
15:8
RXFRMOK15
RXFRMOK14
RXFRMOK13
RXFRMOK12
RXFRMOK11
RXFRMOK10
RXFRMOK9
RXFRMOK8
7:0
RXFRMOK7
RXFRMOK6
RXFRMOK5
RXFRMOK4
RXFRMOK3
RXFRMOK2
RXFRMOK1
RXFRMOK0
31:24
23:16
SU.TxFrmCtr
TXFRMC31
TXFRMC30
TXFRMC29
TXFRMC28
TXFRMC27
TXFRMC26
TXFRMC25
TXFRMC24
23:16
TXFRMC23
TXFRMC22
TXFRMC21
TXFRMC20
TXFRMC19
TXFRMC18
TXFRMC17
TXFRMC16
15:8
TXFRMC15
TXFRMC14
TXFRMC13
TXFRMC12
TXFRMC11
TXFRMC10
TXFRMC9
TXFRMC8
7:0
TXFRMC7
TXFRMC6
TXFRMC5
TXFRMC4
TXFRMC3
TXFRMC2
TXFRMC1
TXFRMC0
SU.TxBytesCtr
TXBYTEC31
TXBYTEC30
TXBYTEC29
TXBYTEC28
TXBYTEC27
TXBYTEC26
TXBYTEC25
TXBYTEC24
23:16
TXBYTEC23
TXBYTEC22
TXBYTEC21
TXBYTEC20
TXBYTEC19
TXBYTEC18
TXBYTEC17
TXBYTEC16
15:8
TXBYTEC15
TXBYTEC14
TXBYTEC13
TXBYTEC12
TXBYTEC11
TXBYTEC10
TXBYTEC9
TXBYTEC8
7:0
TXBYTEC7
TXBYTEC6
TXBYTEC5
TXBYTEC4
TXBYTEC3
TXBYTEC2
TXBYTEC1
TXBYTEC0
SU.TxBytesOkCtr TXBYTEOK31 TXBYTEOK30 TXBYTEOK29 TXBYTEOK28 TXBYTEOK27 TXBYTEOK26 TXBYTEOK25 TXBYTEOK24
23:16
15:8
TXBYTEOK23 TXBYTEOK22 TXBYTEOK21 TXBYTEOK20 TXBYTEOK19 TXBYTEOK18 TXBYTEOK17 TXBYTEOK16
TXBYTEOK15 TXBYTEOK14 TXBYTEOK13 TXBYTEOK12 TXBYTEOK11 TXBYTEOK10 TXBYTEOK9
TXBYTEOK8
7:0
TXBYTEOK7
TXBYTEOK6
TXBYTEOK5
TXBYTEOK4
TXBYTEOK3
TXBYTEOK2
TXBYTEOK1
TXBYTEOK0
SU.TxFrmUndr
TXFRMU31
TXFRMU30
TXFRMU29
TXFRMU28
TXFRMU27
TXFRMU26
TXFRMU25
TXFRMU24
23:16
TXFRMU23
TXFRMU22
TXFRMU21
TXFRMU20
TXFRMU19
TXFRMU18
TXFRMU17
TXFRMU16
15:8
TXFRMU15
TXFRMU14
TXFRMU13
TXFRMU12
TXFRMU11
TXFRMU10
TXFRMU9
TXFRMU8
7:0
TXFRMU7
TXFRMU6
TXFRMU5
TXFRMU4
TXFRMU3
TXFRMU2
TXFRMU1
TXFRMU0
TXFRMBD31
TXFRMBD30
TXFRMBD29
TXFRMBD28
TXFRMBD27
TXFRMBD26
TXFRMBD25
TXFRMBD24
23:16
TXFRMBD23
TXFRMBD22
TXFRMBD21
TXFRMBD20
TXFRMBD19
TXFRMBD18
TXFRMBD17
TXFRMBD16
15:8
TXFRMBD15
TXFRMBD14
TXFRMBD13
TXFRMBD12
TXFRMBD11
TXFRMBD10
TXFRMBD9
TXFRMBD8
7:0
TXFRMBD7
TXFRMBD6
TXFRMBD5
TXFRMBD4
TXFRMBD3
TXFRMBD2
TXFRMBD1
TXFRMBD0
SU.TxBdFrmCtr
Note that the addresses in the table above are the indirect addresses that must be provided to the SU.MACAWH and
SU.MACAWL. All unused and reserved locations must be initialized to zero for proper operation unless specifically
noted otherwise.
126 of 333
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
12.2 T1/E1/J1 Transceiver Register Bit Map
Table 12-7. T1/E1/J1 Transceiver Register Bit Map (Active when CST = 0)
ADDR
NAME
0
TR.MSTRREG
1
TR.IOCR1
2
TR.IOCR2
3
TR.T1RCR1
4
TR.T1RCR2
5
TR.T1TCR1
6
TR.T1TCR2
7
TR.T1CCR1
8
TR.SSIE1-T1
TR.SSIE1-E1
9
TR.SSIE2-T1
TR.SSIE2-E1
0A
TR.SSIE3-T1
TR.SSIE3-E1
0B
TR.SSIE4
0C
TR.T1RDMR1
0D
TR.T1RDMR2
0E
TR.T1RDMR3
0F
TR.IDR
10
TR.INFO1
11
TR.INFO2
12
TR.INFO3
13
Reserved
14
15
16
17
18
19
1A
1B
1C
1D
1E
1F
20
21
22
23
24
25
26
27
28
29
2A
2B
2C
2D
2E
2F
30
31
32
33
TR.IIR1
TR.IIR2
TR.SR1
TR.IMR1
TR.SR2
TR.IMR2
TR.SR3
TR.IMR3
TR.SR4
TR.IMR4
TR.SR5
TR.IMR5
TR.SR6
TR.IMR6
TR.SR7
TR.IMR7
TR.SR8
TR.IMR8
TR.SR9
TR.IMR9
TR.PCPR
TR.PCDR1
TR.PCDR2
TR.PCDR3
TR.PCDR4
TR.INFO4
TR.INFO5
TR.INFO6
TR.INFO7
TR.H1RC
TR.H2RC
TR.E1RCR1
BIT 7
—
RSMS
RCLKINV
—
—
TJC
TB8ZS
—
CH8
CH7
CH16
CH15
CH24
CH22
CH30
CH8
CH16
CH24
ID7
RPDV
BSYNC
—
BIT 6
BIT 5
BIT 4
BIT 3
—
—
—
TEST1
RSMS2
RSMS1
RSIO
TSDW
TCLKINV RSYNCINV TSYNCINV TSSYNCINV
ARC
OOF1
OOF2
SYNCC
RFM
RB8ZS
RSLC96
RZSE
TFPT
TCPT
TSSE
GB7S
TSLC96
TZSE
FBCT2
FBCT1
—
—
TRAI-CI
TAIS-CI
CH7
CH6
CH5
CH4
CH5
CH4
CH3
CH6
CH15
CH14
CH13
CH12
CH14
CH13
CH12
CH11
CH23
CH22
CH21
CH20
CH21
CH20
CH19
CH18
CH29
CH28
CH27
CH26
CH7
CH6
CH5
CH4
CH15
CH14
CH13
CH12
CH23
CH22
CH21
CH20
ID6
ID5
ID4
ID3
TPDV
COFA
8ZD
16ZD
BD
TCLE
TOCD
RL3
—
—
—
—
BIT 2
TEST0
TSM
H100EN
SYNCT
—
TFDLS
TD4YM
TFM
CH3
CH2
CH11
CH10
CH19
CH17
CH25
CH3
CH11
CH19
ID2
SEFE
RL2
CRCRC
BIT 1
T1/E1
TSIO
TSCLKM
SYNCE
RJC
TBL
Reserved
PDE
CH2
CH1
CH10
CH9
CH18
CH16
CH24
CH2
CH10
CH18
ID1
B8ZS
RL1
FASRC
BIT 0
SFTRST
ODF
RSCLKM
RESYNC
RD4YM
TYEL
TB7ZS
TLOOP
CH1
UCAW
CH9
CH8
CH17
LCAW
CH23
CH1
CH9
CH17
ID0
FBE
RL0
CASRC
-
-
-
-
-
-
-
-
SR8
—
ILUT
ILUT
RYELC
RYELC
LSPARE
LSPARE
RAIS-CI
RAIS-CI
—
—
—
—
—
—
—
—
—
—
RSAOICS
CH8
CH16
CH24
CH32
—
—
—
CSC5
RHR
RHR
RSERC
SR7
—
TIMER
TIMER
RUA1C
RUA1C
LDN
LDN
RSA1
RSA1
—
—
TMEND
TMEND
TMEND
TMEND
—
—
BBED
BBED
RSRCS
CH7
CH15
CH23
CH31
—
—
—
CSC4
RHMS
RHMS
RSIGM
SR6
—
RSCOS
RSCOS
FRCLC
FRCLC
LUP
LUP
RSA0
RSA0
TESF
TESF
RPE
RPE
RPE
RPE
BOCC
BOCC
BBCO
BBCO
RFCS
CH6
CH14
CH22
CH30
—
TEMPTY
TEMPTY
CSC3
—
—
RHDB3
SR5
—
JALT
JALT
RLOSC
RLOSC
LOTC
LOTC
TMF
TMF
TESEM
TESEM
RPS
RPS
RPS
RPS
RFDLAD
RFDLAD
BEC0
BEC0
BRCS
CH5
CH13
CH21
CH29
—
TFULL
TFULL
CSC2
—
—
RG802
SR4
—
LRCL
LRCL
RYEL
RYEL
LORC
LORC
TAF
TAF
TSLIP
TSLIP
RHWM
RHWM
RHWM
RHWM
RFDLF
RFDLF
BRA1
BRA1
THSCS
CH4
CH12
CH20
CH28
H2UDR
REMPTY
REMPTY
CSC0
HDLCD
HDLCD
RCRC4
SR3
—
TCLE
TCLE
RUA1
RUA1
V52LNK
V52LNK
RMF
RMF
RESF
RESF
RNE
RNE
RNE
RNE
TFDLE
TFDLE
BRA0
BRA0
PEICS
CH3
CH11
CH19
CH27
H2OBT
PS2
PS2
FASSA
—
—
FRC
SR2
—
TOCD
TOCD
FRCL
FRCL
RDMA
RDMA
RCMF
RCMF
RESEM
RESEM
TLWM
TLWM
TLWM
TLWM
RMTCH
RMTCH
BRLOS
BRLOS
TFCS
CH2
CH10
CH18
CH26
H1UDR
PS1
PS1
CASSA
—
—
SYNCE
SR1
SR9
LOLITC
LOLITC
RLOS
RLOS
RRA
RRA
RAF
RAF
RSLIP
RSLIP
TNF
TNF
TNF
TNF
RBOC
RBOC
BSYNC
BSYNC
BTCS
CH1
CH9
CH17
CH25
H1OBT
PS0
PS0
CRC4SA
RSFD
RSFD
RESYNC
127 of 333
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
ADDR
34
35
36
37
38
39
3A
3B
NAME
TR.E1RCR2
TR.E1TCR1
TR.E1TCR2
TR.BOCC
TR.RSINFO1
TR.RSINFO2
TR.RSINFO3
TR.RSINFO4
BIT 7
—
TFPT
Reserved
—
CH8
CH16
CH24
BIT 6
—
T16S
Reserved
—
CH7
CH15
CH23
-
-
3C
3D
3E
3F
TR.RSCSE1
TR.RSCSE2
TR.RSCSE3
TR.RSCSE4
CH8
CH16
CH24
CH7
CH15
CH23
-
40
41
42
43
44
45
46
47
48
49
4A
4B
4C
4D
4E
4F
50
TR.SIGCR
TR.ERCNT
TR.LCVCR1
TR.LCVCR2
TR.PCVCR1
TR.PCVCR2
TR.FOSCR1
TR.FOSCR2
TR.EBCR1
TR.EBCR2
TR.LBCR
TR.PCLR1
TR.PCLR2
TR.PCLR3
TR.PCLR4
TR.ESCR
TR.TS1
GRSRE
—
LCVC15
LCVC7
PCVC15
PCVC7
FOS15
FOS7
EB15
EB7
LTS
CH8
CH16
CH24
CH32
TESALGN
51
TR.TS2
Transmit Signaling Bit Format Changes With Operating Mode. See Register Definition.
52
TR.TS3
Transmit Signaling Bit Format Changes With Operating Mode. See Register Definition.
53
TR.TS4
Transmit Signaling Bit Format Changes With Operating Mode. See Register Definition.
54
TR.TS5
Transmit Signaling Bit Format Changes With Operating Mode. See Register Definition.
55
TR.TS6
Transmit Signaling Bit Format Changes With Operating Mode. See Register Definition.
56
TR.TS7
Transmit Signaling Bit Format Changes With Operating Mode. See Register Definition.
57
TR.TS8
Transmit Signaling Bit Format Changes With Operating Mode. See Register Definition.
58
TR.TS9
Transmit Signaling Bit Format Changes With Operating Mode. See Register Definition.
59
TR.TS10
Transmit Signaling Bit Format Changes With Operating Mode. See Register Definition.
5A
TR.TS11
Transmit Signaling Bit Format Changes With Operating Mode. See Register Definition.
5B
TR.TS12
Transmit Signaling Bit Format Changes With Operating Mode. See Register Definition.
5C
TR.TS13
Transmit Signaling Bit Format Changes With Operating Mode. See Register Definition.
5D
TR.TS14
Transmit Signaling Bit Format Changes With Operating Mode. See Register Definition.
5E
TR.TS15
Transmit Signaling Bit Format Changes With Operating Mode. See Register Definition.
5F
TR.TS16
Transmit Signaling Bit Format Changes With Operating Mode. See Register Definition.
60
TR.RS1
Receive Signaling Bit Format Changes With Operating Mode. See Register Definition.
61
TR.RS2
Receive Signaling Bit Format Changes With Operating Mode. See Register Definition.
62
TR.RS3
Receive Signaling Bit Format Changes With Operating Mode. See Register Definition.
BIT 5
—
TUA1
Reserved
—
CH6
CH14
CH22
CH30
BIT 4
—
TSiS
Reserved
RBOCE
CH5
CH13
CH21
CH29
BIT 3
—
TSA1
Reserved
RBR
CH4
CH12
CH20
CH28
BIT 2
—
THDB3
AEBE
RBF1
CH3
CH11
CH19
CH27
BIT 1
—
TG802
AAIS
RBF0
CH2
CH10
CH18
CH26
BIT 0
RCLA
TCRC4
ARA
SBOC
CH1
CH9
CH17
CH25
-
CH6
CH14
CH22
CH30
CH5
CH13
CH21
CH29
CH4
CH12
CH20
CH28
CH3
CH11
CH19
CH27
CH2
CH10
CH18
CH26
CH1
CH9
CH17
CH25
—
MECU
LCVC14
LCVC6
PCVC14
PCVC6
FOS14
FOS6
EB14
EB6
—
CH7
CH15
CH23
CH31
TESR
—
ECUS
LCVC13
LCVC5
PCVC13
PCVC5
FOS13
FOS5
EB13
EB5
—
CH6
CH14
CH22
CH30
TESMDM
RFE
EAMS
LCVC12
LCVC4
PCVC12
PCVC4
FOS12
FOS4
EB12
EB4
LIUC
CH5
CH13
CH21
CH29
TESE
RFF
VCRFS
LCVC11
LCVC3
PCVC11
PCVC3
FOS11
FOS3
EB11
EB3
LLB
CH4
CH12
CH20
CH28
RESALGN
RCCS
FSBE
LCVC10
LCVC2
PCVC10
PCVC2
FOS10
FOS2
EB10
EB2
RLB
CH3
CH11
CH19
CH27
RESR
TCCS
MOSCRF
LCVC9
LCVC1
PCVC9
PCVC1
FOS9
FOS1
EB9
EB1
PLB
CH2
CH10
CH18
CH26
RESMDM
FRSAO
LCVCRF
LCCV8
LCVC0
PCVC8
PCVC0
FOS8
FOS0
EB8
EB0
FLB
CH1
CH9
CH17
CH25
RESE
Transmit Signaling Bit Format Changes With Operating Mode. See Register Definition.
128 of 333
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
ADDR
63
NAME
TR.RS4
64
TR.RS5
Receive Signaling Bit Format Changes With Operating Mode. See Register Definition.
65
TR.RS6
Receive Signaling Bit Format Changes With Operating Mode. See Register Definition.
66
TR.RS7
Receive Signaling Bit Format Changes With Operating Mode. See Register Definition.
67
TR.RS8
Receive Signaling Bit Format Changes With Operating Mode. See Register Definition.
68
TR.RS9
Receive Signaling Bit Format Changes With Operating Mode. See Register Definition.
69
TR.RS10
Receive Signaling Bit Format Changes With Operating Mode. See Register Definition.
6A
TR.RS11
Receive Signaling Bit Format Changes With Operating Mode. See Register Definition.
6B
TR.RS12
Receive Signaling Bit Format Changes With Operating Mode. See Register Definition.
6C
TR.RS13
Receive Signaling Bit Format Changes With Operating Mode. See Register Definition.
6D
TR.RS14
Receive Signaling Bit Format Changes With Operating Mode. See Register Definition.
6E
TR.RS15
Receive Signaling Bit Format Changes With Operating Mode. See Register Definition.
6F
TR.RS16
70
71
72
73
74
75
76
77
78
79
7A
7B
7C
TR.CCR1
TR.CCR2
TR.CCR3
TR.CCR4
TR.TDS0SEL
TR.TDS0M
TR.RDS0SEL
TR.RDS0M
TR.LIC1
TR.LIC2
TR.LIC3
TR.LIC4
Reserved
—
—
—
RLT3
—
B1
—
B1
L2
ETS
—
CMIE
CRC4R
—
—
RLT2
—
B2
—
B2
L1
LIRST
TCES
CMII
SIE
—
—
RLT1
—
B3
—
B3
L0
IBPV
RCES
MPS1
ODM
—
—
RLT0
TCM4
B4
RCM4
B4
EGL
TUA1
MM1
MPS0
—
—
TDATFMT
—
TCM3
B5
RCM3
B5
JAS
JAMUX
MM0
TT1
-
-
-
-
-
-
-
-
7D
7E
7F
80
81
82
83
84
85
86
87
88
89
8A
8B
8C
8D
8E
8F
90
91
92
93
94
95
TR.TLBC
TR.IAAR
TR.PCICR
TR.TCICE1
TR.TCICE2
TR.TCICE3
TR.TCICE4
TR.RCICE1
TR.RCICE2
TR.RCICE3
TR.RCICE4
TR.RCBR1
TR.RCBR2
TR.RCBR3
TR.RCBR4
TR.TCBR1
TR.TCBR2
TR.TCBR3
TR.TCBR4
TR.H1TC
TR.H1FC
TR.H1RCS1
TR.H1RCS2
TR.H1RCS3
TR.H1RCS4
—
GRIC
C7
CH8
CH16
CH24
CH32
CH8
CH16
CH24
CH32
CH8
CH16
CH24
CH32
CH8
CH16
CH24
CH32
NOFS
—
RHCS8
RHCS16
RHCS24
RHCS32
AGCD
GTIC
C6
CH7
CH15
CH23
CH31
CH7
CH15
CH23
CH31
CH7
CH15
CH23
CH31
CH7
CH15
CH23
CH31
TEOML
—
RHCS7
RHCS15
RHCS23
RHCS31
GC5
IAA5
C5
CH6
CH14
CH22
CH30
CH6
CH14
CH22
CH30
CH6
CH14
CH22
CH30
CH6
CH14
CH22
CH30
THR
TFLWM2
RHCS6
RHCS14
RHCS22
RHCS30
GC4
IAA4
C4
CH5
CH13
CH21
CH29
CH5
CH13
CH21
CH29
CH5
CH13
CH21
CH29
CH5
CH13
CH21
CH29
THMS
TFLWM1
RHCS5
RHCS13
RHCS21
RHCS29
GC3
IAA3
C3
CH4
CH12
CH20
CH28
CH4
CH12
CH20
CH28
CH4
CH12
CH20
CH28
CH4
CH12
CH20
CH28
TFS
TFLWM0
RHCS4
RHCS12
RHCS20
RHCS28
GC2
IAA2
C2
CH3
CH11
CH19
CH27
CH3
CH11
CH19
CH27
CH3
CH11
CH19
CH27
CH3
CH11
CH19
CH27
TEOM
RFHWM2
RHCS3
RHCS11
RHCS19
RHCS27
GC1
IAA1
C1
CH2
CH10
CH18
CH26
CH2
CH10
CH18
CH26
CH2
CH10
CH18
CH26
CH2
CH10
CH18
CH26
TZSD
RFHWM1
RHCS2
RHCS10
RHCS18
RHCS26
GC0
IAA0
C0
CH1
CH9
CH17
CH25
CH1
CH9
CH17
CH25
CH1
CH9
CH17
CH25
CH1
CH9
CH17
CH25
TCRCD
RFHWM0
RHCS1
RHCS9
RHCS17
RHCS25
BIT 7
BIT 6
BIT 5
BIT 4
BIT 3
BIT 2
BIT 1
BIT 0
Receive Signaling Bit Format Changes With Operating Mode. See Register Definition.
Receive Signaling Bit Format Changes With Operating Mode. See Register Definition.
129 of 333
TCSS1
TCSS0
RLOSF
BPCS1
BPCS0
BPEN
TGPCKEN RDATFMT RGPCKEN
—
—
—
TCM2
TCM1
TCM0
B6
B7
B8
RCM2
RCM1
RCM0
B6
B7
B8
JABDS
DJA
TPD
—
SCLD
CLDS
RSCLKE
TSCLKE
TAOZ
TT0
RT1
RT0
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
ADDR
96
97
98
99
9A
9B
9C
9D
9E
9F
A0
A1
A2
A3
A4
A5
A6
A7
A8
A9
AA
AB
AC
AD
AE
AF
B0
NAME
TR.H1RTSBS
TR.H1TCS1
TR.H1TCS2
TR.H1TCS3
TR.H1TCS4
TR.H1TTSBS
TR.H1RPBA
TR.H1TF
TR.H1RF
TR.H1TFBA
TR.H2TC
TR.H2FC
TR.H2RCS1
TR.H2RCS2
TR.H2RCS3
TR.H2RCS4
TR.H2RTSBS
TR.H2TCS1
TR.H2TCS2
TR.H2TCS3
TR.H2TCS4
TR.H2TTSBS
TR.H2RPBA
TR.H2TF
TR.H2RF
TR.H2TFBA
Reserved
BIT 7
RCB8SE
THCS8
THCS16
THCS24
THCS32
TCB8SE
MS
THD7
RHD7
TFBA7
NOFS
—
RHCS8
RHCS16
RHCS24
RHCS32
RCB8SE
THCS8
THCS16
THCS24
THCS32
TCB8SE
MS
THD7
RHD7
TFBA7
BIT 6
RCB7SE
THCS7
THCS15
THCS23
THCS31
TCB7SE
RPBA6
THD6
RHD6
TFBA6
TEOML
—
RHCS7
RHCS15
RHCS23
RHCS31
RCB7SE
THCS7
THCS15
THCS23
THCS31
TCB7SE
RPBA6
THD6
RHD6
TFBA6
BIT 5
RCB6SE
THCS6
THCS14
THCS22
THCS30
TCB6SE
RPBA5
THD5
RHD5
TFBA5
THR
TFLWM2
RHCS6
RHCS14
RHCS22
RHCS30
RCB6SE
THCS6
THCS14
THCS22
THCS30
TCB6SE
RPBA5
THD5
RHD5
TFBA5
BIT 4
RCB5SE
THCS5
THCS13
THCS21
THCS29
TCB5SE
RPBA4
THD4
RHD4
TFBA4
THMS
TFLWM1
RHCS5
RHCS13
RHCS21
RHCS29
RCB5SE
THCS5
THCS13
THCS21
THCS29
TCB5SE
RPBA4
THD4
RHD4
TFBA4
BIT 3
RCB4SE
THCS4
THCS12
THCS20
THCS28
TCB4SE
RPBA3
THD3
RHD3
TFBA3
TFS
TFLWM0
RHCS4
RHCS12
RHCS20
RHCS28
RCB4SE
THCS4
THCS12
THCS20
THCS28
TCB4SE
RPBA3
THD3
RHD3
TFBA3
BIT 2
RCB3SE
THCS3
THCS11
THCS19
THCS27
TCB3SE
RPBA2
THD2
RHD2
TFBA2
TEOM
RFHWM2
RHCS3
RHCS11
RHCS19
RHCS27
RCB3SE
THCS3
THCS11
THCS19
THCS27
TCB3SE
RPBA2
THD2
RHD2
TFBA2
BIT 1
RCB2SE
THCS2
THCS10
THCS18
THCS26
TCB2SE
RPBA1
THD1
RHD1
TFBA1
TZSD
RFHWM1
RHCS2
RHCS10
RHCS18
RHCS26
RCB2SE
THCS2
THCS10
THCS18
THCS26
TCB2SE
RPBA1
THD1
RHD1
TFBA1
BIT 0
RCB1SE
THCS1
THCS9
THCS17
THCS25
TCB1SE
RPBA0
THD0
RHD0
TFBA0
TCRCD
RFHWM0
RHCS1
RHCS9
RHCS17
RHCS25
RCB1SE
THCS1
THCS9
THCS17
THCS25
TCB1SE
RPBA0
THD0
RHD0
TFBA0
-
-
-
-
-
-
-
-
B1
Reserved
-
-
-
-
-
-
-
-
B2
Reserved
-
-
-
-
-
-
-
-
B3
Reserved
-
-
-
-
-
-
-
-
B4
Reserved
-
-
-
-
-
-
-
-
B5
Reserved
-
-
-
-
-
-
-
-
B6
B7
B8
B9
BA
BB
BC
BD
BE
BF
C0
TR.IBCC
TR.TCD1
TR.TCD2
TR.RUPCD1
TR.RUPCD2
TR.RDNCD1
TR.RDNCD2
TR.RSCC
TR.RSCD1
TR.RSCD2
TR.RFDL
TC1
C7
C7
C7
C7
C7
C7
—
C7
C7
TC0
C6
C6
C6
C6
C6
C6
—
C6
C6
RUP2
C5
C5
C5
C5
C5
C5
—
C5
C5
RUP1
C4
C4
C4
C4
C4
C4
—
C4
C4
RUP0
C3
C3
C3
C3
C3
C3
—
C3
C3
RDN2
C2
C2
C2
C2
C2
C2
RSC2
C2
C2
RDN1
C1
C1
C1
C1
C1
C1
RSC1
C1
C1
RDN0
C0
C0
C0
C0
C0
C0
RSC0
C0
C0
C1
C2
C3
C4
TR.TFDL
TR.RFDLM1
TR.RFDLM2
-
TFDL7
RFDLM7
RFDLM7
TFDL6
RFDLM6
RFDLM6
TFDL5
RFDLM5
RFDLM5
TFDL4
RFDLM4
RFDLM4
TFDL3
RFDLM3
RFDLM3
TFDL2
RFDLM2
RFDLM2
TFDL1
RFDLM1
RFDLM1
TFDL0
RFDLM0
RFDLM0
C5
C6
C7
C8
C9
CA
CB
CC
TR.IBOC
TR.RAF
TR.RNAF
TR.RSiAF
TR.RSiNAF
TR.RRA
TR.RSa4
TR.RSa5
—
Si
Si
SiF0
SiF1
RRAF1
RSa4F1
RSa5F1
IBS1
0
1
SiF2
SiF3
RRAF3
RSa4F3
RSa5F3
IBS0
0
A
SiF4
SiF5
RRAF5
RSa4F5
RSa5F5
1
Sa4
SiF6
SiF7
RRAF7
RSa4F7
RSa5F7
IBOEN
1
Sa5
SiF8
SiF9
RRAF9
RSa4F9
RSa5F9
DA2
0
Sa6
SiF10
SiF11
RRAF11
RSa4F11
RSa5F11
DA1
1
Sa7
SiF12
SiF13
RRAF13
RSa4F13
RSa5F13
DA0
1
Sa8
SiF14
SiF15
RRAF15
RSa4F15
RSa5F15
Bit Definitions Change With BOCC Setting. See Register Definition.
130 of 333
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
ADDR
CD
CE
CF
D0
D1
D2
D3
D4
D5
D6
D7
D8
D9
DA
DB
DC
DD
DE
DF
E0
E1
E2
E3
E4
E5
E6
E7
E8
E9
EA
EB
EC
ED
EE
EF
F1
F2
F0–FF
NAME
TR.RSa6
TR.RSa7
TR.RSa8
TR.TAF
TR.TNAF
TR.TSiAF
TR.TSiNAF
TR.TRA
TR.TSa4
TR.TSa5
TR.TSa6
TR.TSa7
TR.TSa8
TR.TSACR
TR.BAWC
TR.BRP1
TR.BRP2
TR.BRP3
TR.BRP4
TR.BC1
TR.BC2
Reserved
TR.BBC1
TR.BBC2
TR.BBC3
TR.BBC4
TR.BEC1
TR.BEC2
TR.BEC3
TR.BIC
TR.ERC
TR.NOE1
TR.NOE2
TR.NOEL1
TR.NOEL2
TR.PSA1
TR.PSA2
Reserved
BIT 7
RSa6F1
RSa7F1
RSa8F1
Si
Si
TsiF0
TsiF1
TRAF1
TSa4F1
TSa5F1
TSa6F1
TSa7F1
TSa8F1
SiAF
ACNT7
RPAT7
RPAT15
RPAT23
RPAT31
TC
EIB2
BBC7
BBC15
BBC23
BBC31
EC7
EC15
EC23
—
WNOE
C7
—
C7
—
SRIA4
—
BIT 6
RSa6F3
RSa7F3
RSa8F3
0
1
TsiF2
TsiF3
TRAF3
TSa4F3
TSa5F3
TSa6F3
TSa7F3
TSa8F3
SiNAF
ACNT6
RPAT6
RPAT14
RPAT22
RPAT30
TINV
EIB1
BBC6
BBC14
BBC22
BBC30
EC6
EC14
EC22
RFUS
—
C6
—
C6
—
—
BIT 5
RSa6F5
RSa7F5
RSa8F5
0
A
TsiF4
TsiF5
TRAF5
TSa4F5
TSa5F5
TSa6F5
TSa7F5
TSa8F5
RA
ACNT5
RPAT5
RPAT13
RPAT21
RPAT29
RINV
EIB0
BBC5
BBC13
BBC21
BBC29
EC5
EC13
EC21
—
—
C5
—
C5
—
AGCT2
—
BIT 4
RSa6F7
RSa7F7
RSa8F7
1
Sa4
TsiF6
TsiF7
TRAF7
TSa4F7
TSa5F7
TSa6F7
TSa7F7
TSa8F7
Sa4
ACNT4
RPAT4
RPAT12
RPAT20
RPAT28
PS2
SBE
BBC4
BBC12
BBC20
BBC28
EC4
EC12
EC20
TBAT
CE
C4
—
C4
—
SRR1
—
BIT 3
RSa6F9
RSa7F9
RSa8F9
1
Sa5
TsiF8
TsiF9
TRAF9
TSa4F9
TSa5F9
TSa6F9
TSa7F9
TSa8F9
Sa5
ACNT3
RPAT3
RPAT11
RPAT19
RPAT27
PS1
RPL3
BBC3
BBC11
BBC19
BBC27
EC3
EC11
EC19
TFUS
ER3
C3
—
C3
—
AGCT1
SRIA3
—
BIT 2
RSa6F11
RSa7F11
RSa8F11
0
Sa6
TsiF10
TsiF11
TRAF11
TSa4F11
TSa5F11
TSa6F11
TSa7F11
TSa8F11
Sa6
ACNT2
RPAT2
RPAT10
RPAT18
RPAT26
PS0
RPL2
BBC2
BBC10
BBC18
BBC26
EC2
EC10
EC18
—
ER2
C2
—
C2
—
SRR0
—
BIT 1
RSa6F13
RSa7F13
RSa8F13
1
Sa7
TsiF12
TsiF13
TRAF13
TSa4F13
TSa5F13
TSa6F13
TSa7F13
TSa8F13
Sa7
ACNT1
RPAT1
RPAT9
RPAT17
RPAT25
LC
RPL1
BBC1
BBC9
BBC17
BBC25
EC1
EC9
EC17
BERTDIR
ER1
C1
C9
C1
C9
AGCT0
—
BIT 0
RSa6F15
RSa7F15
RSa8F15
1
Sa8
TsiF14
TSiF15
TRAF15
TSa4F15
TSa5F15
TSa6F15
TSa7F15
TSa8F15
Sa8
ACNT0
RPAT0
RPAT8
RPAT16
RPAT24
RESYNC
RPL0
BBC0
BBC8
BBC16
BBC24
EC0
EC8
EC16
BERTEN
ER0
C0
C8
C0
C8
SRIB0
—
Note: Address locations above are for T1/E1/J1 Transceiver 1. Transceiver 2 has a base address of 100h,
Transceiver 3 has a base address of 200h, and Transceiver 3 has a base address of 300h.
131 of 333
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
12.3 Global Register Definitions for Ethernet Mapper
Functions contained in the global registers include: framer reset, LIU reset, device ID, BERT interrupt status,
framer interrupt status, IBO configuration, MCLK configuration, and BPCLK configuration. These registers are
preserved to provide code compatibility with the multiport devices in this product family. The global registers bit
descriptions are presented below.
Register Name:
Register Description:
Register Address:
Bit #
Name
Default
7
ID07
0
GL.IDRL
Global ID Low Register
00h
6
ID06
0
5
ID05
1
4
ID04
1
3
ID03
0
2
ID02
0
1
ID01
0
0
ID00
0
Bit 7: ID07 Reserved for future use.
Bit 6: ID06 Reserved for future use.
Bit 5: ID05 If this bit is set the device contains a RMII interface
Bit 4: ID04 If this bit is set the device contains a MII interface.
Bit 3: ID03 If this bit is set the device contains an Ethernet PHY.
Bits 2 to 0: ID02 to ID00. A 3-bit count that is equal to 000b for the first die revision, and is incremented with each
successive die revision. May not match the two-letter die revision code on the top brand of the device.
Register Name:
Register Description:
Register Address:
Bit #
Name
Default
7
ID15
0
GL.IDRH
Global ID High Register
01h
6
ID14
0
5
ID13
0
4
ID12
0
3
ID11
0
Bits 7 to 5: ID15 to ID13. Number of ports in the device – 1.
Bit 4: ID12. If this bit is set the device has LIU functionality.
Bit 3: ID11. If this bit is set the device has a framer.
Bit 2: ID10. Reserved for future use.
Bit 1: ID09. If this bit is set the device has HDLC or X.86 encapsulation.
Bit 0: ID08. If this bit is set the device has inverse multiplexing functionality.
132 of 333
2
ID10
0
1
ID09
1
0
ID08
1
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
Register Name:
Register Description:
Register Address:
Bit #
Name
Default
7
—
0
GL.CR1
Global Control Register 1
02h
6
—
0
5
—
0
4
—
0
3
—
0
2
REF_CLKO
0
1
INTM
0
0
RST
0
Bit 2: REF_CLKO OFF (REF_CLKO). This bit determines the REF_CLKO output mode.
1 = REF_CLKO is disabled and outputs an active low signal.
0 = REF_CLKO is active and in accordance with RMII/MII Selection.
Bit 1: INT Pin Mode (INTM) This bit determines the inactive mode of the INT pin. The INT pin always drives low
when active.
1 = Pin is high impedance when not active.
0 = Pin drives high when not active.
Bit 0: Reset (RST). When this bit is set to 1, all of the internal data path and status and control registers (except
this RST bit), on all ports, are reset to their default state. This bit must be set high for a minimum of 100ns.
0 = Normal operation.
1 = Reset and force all internal registers to their default values.
Register Name:
Register Description:
Register Address:
Bit #
Name
Default
7
—
0
GL.RTCAL
Global Receive and Transmit Serial Port Clock Activity Latched Status
04h
6
—
0
5
—
0
4
RLCALS1
0
3
—
0
2
—
0
1
—
0
0
TLCALS1
0
Bit 4: Receive Serial Interface Clock Activity Latched Status 1 (RLCALS1). This bit is set to 1 if the receive
clock for Serial Interface 1 has activity. This bit is cleared upon read.
Bit 0: Transmit Serial Interface Clock Activity Latched Status 1 (TLCALS1). This bit is set to 1 if the transmit
clock for Serial Interface 1 has activity. This bit is cleared upon read.
Register Name:
Register Description:
Register Address:
Bit #
Name
Default
7
—
0
GL.SRCALS
Global SDRAM Reference Clock Activity Latched Status
05h
6
—
0
5
—
0
4
—
0
3
—
0
2
—
0
1
REFCLKS
0
0
SYSCLS
0
Bit 1: Reference Clock Activity Latched Status (REFCLKS). This bit is set to 1 if REF_CLK has activity. This bit
is cleared upon read.
Bit 0: System Clock Input Latched Status (SYSCLS). This bit is set to 1 if SYSCLKI has activity. This bit is
cleared upon read.
133 of 333
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
Register Name:
Register Description:
Register Address:
Bit #
Name
Default
7
—
0
GL.LIE
Global Serial Interface Interrupt Enable
06h
6
—
0
5
—
0
4
LIN1TIE
0
3
—
0
2
—
0
1
—
0
0
LIN1RIE
0
Bit 4: Serial Interface 1 TX Interrupt Enable (LINE1TIE). Setting this bit to 1 enables an interrupt on LIN1TIS.
Bit 0: Serial Interface 1 RX Interrupt Enable (LINE1RIE). Setting this bit to 1 enables an interrupt on LIN1RIS.
Register Name:
Register Description:
Register Address:
Bit #
Name
Default
7
—
0
GL.LIS
Global Serial Interface Interrupt Status
07h
6
—
0
5
—
0
4
LIN1TIS
0
3
—
0
2
—
0
1
—
0
0
LIN1RIS
0
Bit 4: Serial Interface 1 TX Interrupt Status (LIN1TIS). This bit is set if Serial Interface 1 Transmit has an
enabled interrupt generating event. Serial Interface interrupts consist of HDLC interrupts and X.86 interrupts.
Bit 0: Serial Interface 1 RX Interrupt Status (LIN1RIS). This bit is set if Serial Interface 1 Receive has an
enabled interrupt generating event. Serial Interface interrupts consist of HDLC interrupts and X.86 interrupts.
Register Name:
Register Description:
Register Address:
Bit #
Name
Default
7
—
0
GL.SIE
Global Ethernet Interface Interrupt Enable
08h
6
—
0
5
—
0
4
—
0
3
—
0
2
—
0
1
—
0
0
SUB1IE
0
Bit 0: Ethernet Interface 1 Interrupt Enable (SUB1IE). Setting this bit to 1 enables an interrupt on SUB1S.
Register Name:
Register Description:
Register Address:
Bit #
Name
Default
7
—
0
GL.SIS
Global Ethernet Interface Interrupt Status
09h
6
—
0
5
—
0
4
—
0
3
—
0
2
—
0
1
—
0
0
SUB1IS
0
Bit 0: Ethernet Interface 1 Interrupt Status (SUB1IS). This bit is set to 1 if Ethernet Interface 1 has an enabled
interrupt generating event. The Ethernet Interface consists of the MAC and The RMII/MII port.
134 of 333
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
Register Name:
Register Description:
Register Address:
Bit #
Name
Default
7
—
0
GL.TRQIE
Global Transmit Receive Queue Interrupt Enable
0Ah
6
—
0
5
—
0
4
TQ1IE
0
3
—
0
2
—
0
1
—
0
0
RQ1IE
0
Bit 4: Transmit Queue 1 Interrupt Enable (TQ1IE). Setting this bit to 1 enables an interrupt on TQ1IS.
Bit 0: Receive Queue 1 Interrupt Enable (RQ1IE). Setting this bit to 1 enables an interrupt on RQ1IS.
Register Name:
Register Description:
Register Address:
Bit #
Name
Default
7
—
0
GL.TRQIS
Global Transmit Receive Queue Interrupt Status
0Bh
6
—
0
5
—
0
4
TQ1IS
0
3
—
0
2
—
0
1
—
0
0
RQ1IS
0
Bit 4: Transmit Queue 1 Interrupt Enable (TQ1IS). If this bit is set to 1, the Transmit Queue 1 has interrupt status
event. Transmit queue events are transmit queue crossing thresholds and queue overflows.
Bit 0: Receive Queue 1 Interrupt Status (RQ1IS). If this bit is set to 1, the Receive Queue 1 has interrupt status
event. Receive queue events are transmit queue crossing thresholds and queue overflows.
Register Name:
Register Description:
Register Address:
Bit #
Name
Default
7
—
0
GL.IBIE
Global IMUX and BERT Interrupt Enable
0Ch
6
—
0
5
—
0
4
—
0
3
—
0
2
—
0
1
IMUXIE
0
0
BIE
0
1
IIS
0
0
BIS
0
Bit 1: IMUX Interrupt Enable (IMUXIE). Setting this bit to 1 enables an interrupt on IIS.
Bit 0: BERT Interrupt Enable (BIE). Setting this bit to 1 enables an interrupt on BIS.
Register Name:
Register Description:
Register Address:
Bit #
Name
Default
7
—
0
GL.IBIS
Global IMUX and BERT Interrupt Status
0Dh
6
—
0
5
—
0
4
—
0
3
—
0
2
—
0
Bit 1: IMUX Interrupt Status (IIS). This bit is set to 1 if the IMUX has an enabled interrupt generating event.
Bit 0: BERT Interrupt Status (BIS). This bit is set to 1 if the BERT has an enabled interrupt generating event.
135 of 333
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
Register Name:
Register Description:
Register Address:
Bit #
Name
Default
7
—
0
GL.CON1
Connection Register for Ethernet Interface 1
0Eh
6
—
0
5
—
0
4
—
0
3
—
0
2
—
0
1
—
0
0
LINE1[0]
1
Bit 0: LINE1[0]. This bit is preserved to provide software compatibility with multiport devices. The LINE1[0] bit
selects the Ethernet port that is to be connected to the Serial Interface. Note that bidirectional connection is
assumed between the Serial and Ethernet Interfaces. The connection register and corresponding queue size must
be defined for proper operation. Writing a 0 to this register will disconnect the connection. When a connection is
disconnected, “1”s are sourced to the Serial Interface transmit and to the HDLC receiver and the clocks to the
HDLC transmitter/receiver are disabled.
Register Name:
Register Description:
Register Address:
Bit #
Name
Default
7
—
0
GL.C1QPR
Connection 1 Queue Pointer Reset
12h
6
—
0
5
—
0
4
—
0
3
C1MRPR
0
2
C1HWPR
0
1
C1MHPR
0
0
C1HRPR
0
Bit 3: MAC Read Pointer Reset (C1MRPR). Setting this bit to 1 resets the receive queue read pointer for
connection 1. This queue pointer must be reset after a disconnect and before a connection. The user must clear
the bit before subsequent reset operations.
Bit 2: HDLC Write Pointer Reset (C1HWPR). Setting this bit to 1 resets the receive queue write pointer for
connection 1. This queue pointer must be reset after a disconnect and before a connection. The user must clear
the bit before subsequent reset operations.
Bit 1: HDLC Read Pointer Reset (C1MHPR). Setting this bit to 1 resets the transmit queue read pointer for
connection 1. This queue pointer must be reset after a disconnect and before a connection. The user must clear
the bit before subsequent reset operations.
Bit 0: MAC Transmit Write Pointer Reset (C1HRPR). Setting this bit to 1 resets the transmit queue write pointer
for connection 1. This queue pointer must be reset after a disconnect and before a connection. The user must clear
the bit before subsequent reset operations.
136 of 333
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
Register Name:
Register Description:
Register Address:
Bit #
Name
Default
GL.IMXCN
Inverse MUX Configuration Register
16h
7
—
0
6
T1E1
0
5
RXE
0
4
SENDE
0
3
L4
0
2
L3
0
1
L2
0
0
L1
0
Bit 6: T1E1 Mode (T1E1). This bit determines if the IMUX operation is for T1 or E1 Mode.
0 = T1 Mode
1 = E1 Mode
Bit 5: Receive Enable (RXE). If this bit is set to 1, data will be received from the Serial Interface and passed to
the packet processor. If equal to 0, no data will be sent to the packet processor.
Bit 4: SEND Enable (SENDE). If this bit is set to 1, the data will be transmitted on the Serial Interface. If equal to 0,
data is blocked.
Bit 3: Link 4 (L4). If this bit is set to 1, link number four is participating in the communication. If this bit is equal to
0, the link does not participate.
Bit 2: Link 3 (L3). If this bit is set to 1, link number three is participating in the communication. If this bit is equal to
0, the link does not participate.
Bit 1: Link 2 (L2). If this bit is set to 1, link number two is participating in the communication. If this bit is equal to 0,
the link does not participate.
Bit 0: Link 1 (L1.) If this bit is set to 1, link number one is participating in the communication. If this bit is equal to 0,
the link does not participate.
Register Name:
Register Description:
Register Address:
Bit #
Name
Default
7
IMUXC7
1
GL.IMXC
Inverse MUX Command Register
17h
6
IMUXC6
1
5
IMUXC5
1
4
IMUXC4
1
3
IMUXC3
1
2
IMUXC2
1
1
IMUXC1
1
0
IMUXC0
1
Bits 7 to 0: Inverse Multiplexing Command (IMUXC[7:0]). This byte is used to issue IMUX commands.
Table 12-8. Available IMUX User Commands
VALUE
COMMAN
D
1111 1111b
NOP
1000 0010b
Link Start
COMMENT
No operation to perform.
Establish Link with the distant
end. Upon reception of this
message, this distant end
begins searching for three
consecutive sequence numbers.
The user must send a link start command. The NOP is written to this register after the link start command is
written. All values other than those listed above will be ignored.
137 of 333
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
Register Name:
Register Description:
Register Address:
Bit #
Name
Default
7
ITSYNC4
0
GL.IMXSS
Inverse MUX Sync Status
18h
6
ITSYNC3
0
5
ITSYNC2
0
4
ITSYNC1
0
3
IRSYNC4
0
2
IRSYNC3
0
1
IRSYNC2
0
0
IRSYNC1
0
Bit 7: IMUX Transmit Sync 4 (ITSYNC4). If this bit is set to 1, the device has received a rsync command for the
fourth portion of the 8.192Mbps link from the distant node. This status bit indicates that the distant end is in sync.
Bit 6: IMUX Transmit Sync 3 (ITSYNC3). If this bit is set to 1, the device has received a rsync command for the
third portion of the 8.192Mbps link from the distant node. This status bit indicates that the distant end is in sync.
Bit 5: IMUX Transmit Sync 2 (ITSYNC2). If this bit is set to 1, the device has received a rsync command for the
second portion of the 8.192Mbps link from the distant node. This status bit indicates that the distant end is in sync.
Bit 4: IMUX Transmit Sync 1 (ITSYNC1). If this bit is set to 1, the device has received a rsync command for the
first portion of the 8.192Mbps link from the distant node. This status bit indicates that the distant end is in sync.
Bit 3: IMUX Receive Sync 4 (IRSYNC4). If this bit is set to 1, the local end is in sync for the fourth portion of the
8.192Mbps link. The command states that the local end is in sync.
Bit 2: IMUX Receive Sync 3 (IRSYNC3). If this bit is set to 1, the local end is in sync for the third portion of the
8.192Mbps link. The command states that the local end is in sync.
Bit 1: IMUX Receive Sync 2 (IRSYNC2). If this bit is set to 1, the local end is in sync for the second portion of the
8.192Mbps link. The command states that the local end is in sync.
Bit 0: IMUX Receive Sync 1 (IRSYNC1). If this bit is set to 1, the local end is in sync for the first portion of the
8.192Mbps link. The command states that the local end is in sync.
Register Name:
Register Description:
Register Address:
Bit #
Name
Default
GL.IMXSIE
Inverse Mux Sync Interrupt Enable
19h
7
6
5
4
3
2
1
0
ITSYNCIE4 ITSYNCIE3 ITSYNCIE2 ITSYNCIE1 IRSYNCIE4 IRSYNCIE3 IRSYNCIE2 IRSYNCIE1
0
0
0
0
0
0
0
0
Bit 7: IMUX Transmit Sync Interrupt Enable 4 (ITSYNCIE4). Setting this bit to 1 enables an interrupt on
ITSYNCLS4.
Bit 6: IMUX Transmit Sync Interrupt Enable 3 (ITSYNCIE3). Setting this bit to 1 enables an interrupt on
ITSYNCLS3.
Bit 5: IMUX Transmit Sync Interrupt Enable 2 (ITSYNCIE2). Setting this bit to 1 enables an interrupt on
ITSYNCLS2.
Bit 4: IMUX Transmit Sync Interrupt Enable 1 (ITSYNCIE1). Setting this bit to 1 enables an interrupt on
ITSYNCLS1.
Bit 3: IMUX Receive Sync Interrupt Enable 4 (IRSYNCIE4). Setting this bit to 1 enables an interrupt on
IRSYNCLS4.
Bit 2: IMUX Receive Sync Interrupt Enable 3 (IRSYNCIE3).Setting this bit to 1 enables an interrupt on
IRSYNCLS3.
Bit 1: IMUX Receive Sync Interrupt Enable 2 (IRSYNCIE2). Setting this bit to 1 enables an interrupt on
IRSYNCLS2.
Bit 0: IMUX Receive Sync Interrupt Enable 1 (IRSYNCIE1). Setting this bit to 1 enables an interrupt on
IRSYNCLS1.
138 of 333
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
Register Name:
Register Description:
Register Address:
Bit #
Name
Default
GL.IMXSLS
Inverse MUX Sync Latched Status
1Ah
7
6
5
4
3
2
1
0
ITSYNCLS4 ITSYNCLS3 ITSYNCLS2 ITSYNCLS1 IRSYNCLS4 IRSYNCLS3 IRSYNCLS2 IRSYNCLS1
0
0
0
0
0
0
0
0
Bit 7: IMUX Transmit Sync Latched Status 4 (ITSYNCLS4). This is a latched status bit for ITSYNC4.
Bit 6: IMUX Transmit Sync Latched Status 3 (ITSYNCLS3). This is a latched status bit for ITSYNC3.
Bit 5: IMUX Transmit Sync Latched Status 2 (ITSYNCLS2). This is a latched status bit for ITSYNC2.
Bit 4: IMUX Transmit Sync Latched Status 1 (ITSYNCLS1). This is a latched status bit for ITSYNC1.
Bit 3: IMUX Receive Sync Latched Status 4 (IRSYNCLS4). This is a latched status bit for IRSYNC4.
Bit 2: IMUX Receive Sync Latched Status 3 (IRSYNCLS3). This is a latched status bit for IRSYNC3.
Bit 1: IMUX Receive Sync Latched Status 2 (IRSYNCLS2). This is a latched status bit for IRSYNC2.
Bit 0: IMUX Receive Sync Latched Status 1 (IRSYNCLS1). This is a latched status bit for IRSYNC1.
Register Name:
Register Description:
Register Address:
Bit #
Name
Default
GL.IMXDFD
Inverse MUX Diff delay
1Bh
7
6
5
4
3
2
1
0
IMUXDFD7 IMUXDFD6 IMUXDFD5 IMUXDFD4 IMUXDFD3 IMUXDFD2 IMUXDFD1 IMUXDFD0
0
0
0
0
0
0
0
0
Bits 7 to 0: IMUX Differential Delay. These 8 bits provide the IMUX differential delay. The maximum differential
delay that can be measured is 64ms.
Register Name:
Register Description:
Register Address:
Bit #
Name
Default
7
—
0
GL.IMXDFEIE
Inverse MUX Diff delay Error Interrupt Enable
1Ch
6
—
0
5
—
0
4
—
0
3
—
0
2
—
0
1
—
0
0
IDDEIE
0
Bit 0: IMUX Differential Delay Error Interrupt Enable (IDDEIE). Setting this bit to 1 enables an interrupt on
IDDELS0.
Register Name:
Register Description:
Register Address:
Bit #
Name
Default
7
—
0
GL.IMXDFDELS
Inverse MUX Diff delay Error Latched Status
1Dh
6
—
0
5
—
0
4
—
0
3
—
0
2
—
0
1
—
0
0
IDDELS0
0
Bit 0: IMUX Differential Delay Error latched Status (IDDELS0). This bit provides the differential delay error
latched status. It is set to 1 when the differential delay has exceeded 7.75ms.
139 of 333
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
Register Name:
Register Description:
Register Address:
Bit #
Name
Default
7
TOOFIE4
0
GL.IMXOOFIE
Inverse MUX OOF Interrupt Enable
1Eh
6
TOOFIE3
0
5
TOOFIE2
0
4
TOOFIE1
0
3
ROOFIE4
0
2
ROOFIE3
0
1
ROOFIE2
0
0
ROOFIE1
0
Bit 7: IMUX Transmit OOF Interrupt Enable 4 (TOOFIE4). Setting this bit to 1 enables an interrupt on TOOFLS4.
Bit 6: IMUX Transmit OOF Interrupt Enable 3 (TOOFIE3). Setting this bit to 1 enables an interrupt on TOOFLS3.
Bit 5: IMUX Transmit OOF Interrupt Enable 2 (TOOFIE2). Setting this bit to 1 enables an interrupt on TOOFLS2.
Bit 4: IMUX Transmit OOF Interrupt Enable 1 (TOOFIE1). Setting this bit to 1 enables an interrupt on TOOFLS1.
Bit 3: IMUX Receive OOF Interrupt Enable 4 (ROOFIE4). Setting this bit to 1 enables an interrupt on ROOFLS4.
Bit 2: IMUX Receive OOF Interrupt Enable 3 (ROOFIE3). Setting this bit to 1 enables an interrupt on ROOFLS3.
Bit 1: IMUX Receive OOF Interrupt Enable 2 (ROOFIE2). Setting this bit to 1 enables an interrupt on ROOFLS2.
Bit 0: IMUX Receive OOF Interrupt Enable 1 (ROOFIE1). Setting this bit to 1 enables an interrupt on ROOFLS1.
Register Name:
Register Description:
Register Address:
Bit #
Name
Default
7
TOOFLS4
0
GL.IMXOOFLS
Inverse MUX Out Of Frame Latched Status
1Fh
6
OOFLS3
0
5
TOOFLS2
0
4
TOOFLS1
0
3
ROOFL4
0
2
ROOFL3
0
1
ROOFLS2
0
0
ROOFLS1
0
Bit 7: IMUX Transmit OOF Latched Status 4 (TOOFLS4). This is a latched bit for Transmit OOF, this bit is set if
the distant end is out of frame.
Bit 6: IMUX Transmit OOF Latched Status 3 (TOOFLS3). This is a latched bit for Transmit OOF, this bit is set if
the distant end is out of frame.
Bit 5: IMUX Transmit Sync Latched Status 2 (TOOFLS2). This is a latched bit for Transmit OOF, this bit is set if
the distant end is out of frame.
Bit 4: IMUX Transmit Sync Latched Status 1 (TOOFLS1). This is a latched bit for Transmit OOF , this bit is set if
the distant end is out of frame.
Bit 3: IMUX Receive Sync Latched Status 4 (ROOFLS4). This is a latched bit for Receiver OOF, this bit is set if
the receiver end is out of frame.
Bit 2: IMUX Receive Sync Latched Status 3 (ROOFLS3). This is a latched bit for Receiver OOF, this bit is set if
the receiver end is out of frame.
Bit 1: IMUX Receive Sync Latched Status 2 (ROOFLS2). This is a latched bit for Receiver OOF, this bit is set if
the receiver end is out of frame.
Bit 0: IMUX Receive Sync Latched Status 1 (ROOFLS1). This is a latched bit for Receiver OOF, this bit is set if
the receiver end is out of frame.
Note that the user must clear the GL.IMXCN.SENDE bit to stop data transmission when an OOF condition is
detected. The user must re-initiate the handshaking procedure for re-establishment of communication.
140 of 333
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
Register Name:
Register Description:
Register Address:
Bit #
Name
Default
7
—
0
GL.BISTEN
BIST Enable
20h
6
—
0
5
—
0
4
—
0
3
—
0
2
—
0
1
—
0
0
BISTE
0
Bit 0: BIST Enable (BISTE). If this bit is set the device performs BIST test on the SDRAM. Normal data
communication is halted while BIST enable is high. The user must reset the device after completion of BIST test
before normal dataflow can begin.
Register Name:
Register Description:
Register Address:
Bit #
Name
Default
7
—
0
GL.BISTPF
BIST PassFail
21h
6
—
0
5
—
0
4
—
0
3
—
0
2
—
0
1
BISTDN
0
0
BISTPF
0
Bit 1: BIST DONE (BISTDN). If this bit is set to 1, the device has completed the BIST Test initiated by BISTE. The
pass-fail result is available in BISTPF.
Bit 0: BIST PassFail (BISTPF). This bit is equal to 0 after the device performs BIST testing on the SDRAM and
the test passes. This bit is set to 1 if the test failed. This bit is valid only after the BIST test is complete and the
BIST DN bit is set. If set this bit can only be cleared by resetting the device.
Register Name:
Register Description:
Register Address:
GL.LSMRRFD
Global Local Synchronization Machine Reset and Receive Frame Delay
38h
Bit #
Name
Default
6
—
7
—
0
5
FD1
0
4
FD0
0
3
LSMRC3
0
2
LSMRC2
0
1
LSMRC1
0
0
LSMRC0
0
Bits 5 and 4: Frame Delay (FD[1:0]). Configures the delay that the frames are stored in the differential delay
compensation RAM before being sent to the HDLC. The default value is 0 for a frame delay of 2 frames. A value of
“01” = 3 frames, “10” = 4 frames, and “11” = 5 frames.
Bit 3: Local Machine Reset 3 (LSRMC3). Setting this bit to 1 resets the local IMUX state machine for link 4. Clear
for normal operation.
Bit 2: Local Machine Reset 2 (LSRMC2). Setting this bit to 1 resets the local IMUX state machine for link 3. Clear
for normal operation.
Bit 1: Local Machine Reset 1 (LSRMC1). Setting this bit to 1 resets the local IMUX state machine for link 2. Clear
for normal operation.
Bit 0: Local Machine Reset 0 (LSRMC0). Setting this bit to 1 resets the local IMUX state machine for link 1. Clear
for normal operation.
141 of 333
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
Register Name:
Register Description:
Register Address:
Bit #
Name
Default
7
—
0
GL.SDMODE1
Global SDRAM Mode Register 1
3Ah
6
—
0
5
—
0
4
—
0
3
WT
0
2
BL2
0
1
BL1
1
0
BL0
1
Bit 3: Wrap Type (WT). This bit is used to configure the wrap mode.
0 = Sequential
1 = Interleave
Bits 2 to 0: Burst Length 2 through 0 (BL2 to BL0). These bits are used to determine the Burst Length.
Note: This register has a non-zero default value. This should be taken into consideration when initializing
the device.
Note: After changing the value of this register, the user must toggle the GL.SDMODEWS.SDMW bit to write
the new values to the SDRAM.
Register Name:
Register Description:
Register Address:
Bit #
Name
Default
7
—
0
GL.SDMODE2
Global SDRAM Mode Register 2
3Bh
6
—
0
5
—
0
4
—
0
3
—
0
2
LTMOD2
0
1
LTMOD1
1
0
LTMOD0
0
Bits 2 to 0: CAS Latency Mode (LTMOD2 to LTMOD0). These bits are used to setup CAS Latency. Note: Only
CAS Latency of 2 or 3 is allowed.
Note: This register has a non-zero default value. This should be taken into consideration when initializing
the device.
Note: After changing the value of this register, the user must toggle the GL.SDMODEWS.SDMW bit to write
the new values to the SDRAM.
Register Name:
Register Description:
Register Address:
Bit #
Name
Default
7
—
0
GL.SDMODEWS
Global SDRAM Mode Register Write Status
3Ch
6
—
0
5
—
0
4
—
0
3
—
0
2
—
0
1
—
0
0
SDMW
0
Bit 0: SDRAM Mode Write (SDMW). Setting this bit to 1 will write the current values of the mode control and
refresh time control registers to the SDRAM. The user must clear this bit and set it again for subsequent write
operations.
142 of 333
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
Register Name:
Register Description
Register Address:
Bit #
Name
Default
7
SREFT7
0
GL.SDRFTC
Global SDRAM Refresh Time Control
3Dh
6
SREFT6
1
5
SREFT5
0
4
SREFT4
0
3
SREFT3
0
2
SREFT2
1
1
SREFT1
1
0
SREFT0
0
Bits 7 to 0: SDRAM Refresh Time Control (SREFT7 to SREFT0). These 8 bits are used to control the SDRAM
refresh frequency. The refresh rate will be equal to this register value x 8 x 100MHz.
Note: This register has a non-zero default value. This should be taken into consideration when initializing
the device.
Note: After changing the value of this register, the user must toggle the GL.SDMODEWS.SDMW bit to write
the new values to the SDRAM.
143 of 333
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
12.4 Arbiter Registers
The Arbiter manages the transport between the Ethernet port and the Serial Interface. It is responsible for queuing
and dequeuing data to an external SDRAM. The arbiter handles requests from the HDLC and MAC to transfer data
to/from the SDRAM. The base address of the Arbiter register space is 0040h.
12.4.1 Arbiter Register Bit Descriptions
Register Name:
Register Description:
Register Address:
Bit #
Name
Default
7
RQSC7
0
AR.RQSC1
Arbiter Receive Queue Size Connection
40h
6
RQSC6
0
5
RQSC5
1
4
RQSC4
1
3
RQSC3
1
2
RQSC2
1
1
RQSC1
0
0
RQSC0
1
Bits 7 to 0: Receive Queue Size (RQSC[7:0]). These 7 bits of the size of receive queue associated with the
connection. Receive queue is for data arriving from the MAC to be sent to the WAN. The Queue address size is
defined in increments of 32 x 2048 bytes. The queue size is AR.RQSC1 multiplied by 32 to determine the number
of 2048 byte packets that can be stored in the queue. This queue is constructed in the external SDRAM. Note:
Queue size of 0 is not allowed and should never be set.
Register Name:
Register Description:
Register Address:
Bit #
Name
Default
7
TQSC7
0
AR.TQSC1
Arbiter Transmit Queue Size Connection 1
41h
6
TQSC6
0
5
TQSC5
0
4
TQSC4
0
3
TQSC3
0
2
TQSC2
0
1
TQSC1
1
0
TQSC0
1
Bits 7 to 0: Transmit Queue Size (TQSC[7:0]). This is size of transmit queue associated with the connection. The
queue address size is defined in increments of 32 packets. The range of bytes will depend on the external SDRAM
connected to the device. Transmit queue is the data queue for data arriving on the WAN that is sent to the MAC.
Note that queue size of 0 is not allowed and should never be set.
144 of 333
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
12.5 Serial Interface Registers
The Serial Interface contains the Serial HDLC transport circuitry and the associated serial port. The Serial Interface
register map consists of registers that are common functions, transmit functions, and receive functions.
Bits that are underlined are read-only; all other bits can be written. All reserved registers and bits with “—“
designation should be written to zero, unless specifically noted in the register definition. When read, the information
from reserved registers and bits designated with “—“ should be discarded.
Counter registers are updated by asserting (low to high transition) the associated performance monitoring update
signal (xxPMU). During the counter register update process, the associated performance monitoring status signal
(xxPMS) is deasserted. The counter register update process consists of loading the counter register with the
current count, resetting the counter, forcing the zero count status indication low for one clock cycle, and then
asserting xxPMS. No events are missed during this update procedure.
A latched bit is set when the associated event occurs, and remains set until it is cleared by reading. Once cleared,
a latched bit will not be set again until the associated event occurs again. Reserved configuration bits and registers
should be written to zero.
12.5.1 Serial Interface Transmit and Common Registers
Serial Interface Transmit Registers are used to control the HDLC transmitter associated with each Serial Interface.
The register map is shown in the following table. Note that throughout this document the HDLC Processor is also
referred to as a “packet processor.”
12.5.2 Serial Interface Transmit Register Bit Descriptions
Register Name:
Register Description:
Register Address:
Bit #
Name
Default
7
—
0
LI.RSTPD
Serial Interface Reset Register
0C1h
6
—
0
5
—
0
4
—
0
3
—
0
2
—
0
1
RESET
0
0
—
0
Bit 1: RESET If this bit set to 1, the Data Path and Control and Status for this interface are reset. The Serial
Interface is held in Reset as long as this bit is high. This bit must be high for a minimum of 200ns for a valid reset
to occur.
Register Name:
Register Description:
Register Address:
Bit #
Name
Default
7
—
0
LI.LPBK
Serial Interface Loopback Control Register
0C2h
6
—
0
5
—
0
4
—
0
3
—
0
2
—
0
1
—
0
0
QLP
0
Bit 0: Queue Loopback Enable (QLP) If this bit set to 1, data received on the Serial Interface is looped back to
the Serial Interface transmitter. Received data will not be sent from the Serial Interface to the Ethernet Interface.
Buffered packet data will remain in queue until the loopback is removed.
145 of 333
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
12.5.3 Transmit HDLC Processor Registers
Register Name:
Register Description:
Register Address:
Bit #
Name
Default
7
—
0
LI.TPPCL
Transmit Packet Processor Control Low Register
0C4h
6
—
0
5
TFAD
0
4
TF16
0
3
TIFV
0
2
TSD
0
1
TBRE
0
0
TIAEI
0
Note: The user should take care not to modify this register value during packet error insertion.
Bit 5: Transmit FCS Append Disable (TFAD). This bit controls whether or not an FCS is appended to the end of
each packet. When equal to 0, the calculated FCS bytes are appended to packets. When set to 1, packets are
transmitted without FCS. In X.86 Mode, FCS is always 32 bits and is always appended to the packet.
Bit 4: Transmit FCS-16 Enable (TF16). When 0, the FCS processing uses a 32-bit FCS. When 1, the FCS
processing uses a 16-bit FCS. In X.86 Mode, 32-bit FCS processing is enabled.
Bit 3: Transmit Bit Synchronous Inter-Frame Fill Value (TIFV). When 0, inter-frame fill is done with the flag
sequence (7Eh). When 1, inter-frame fill is done with all '1's. This bit is ignored in byte synchronous mode. In X.86
mode the interframe flag is always 7E.
Bit 2: Transmit Scrambling Disable (TSD). When equal to 0, X43+1 scrambling is performed. When set to 1,
scrambling is disabled. Note that in hardware mode, transmit scrambling is controlled by the SCD hardware pin.
Bit 1: Transmit Bit Reordering Enable (TBRE). When equal to 0, bit reordering is disabled (The first bit
transmitted is from the MSB of the transmit FIFO byte TFD [7]). When set to 1, bit reordering is enabled (The first
bit transmitted is from the LSB of the transmit FIFO byte TFD [0]). Note that this function can be controlled in
Hardware mode with the BREO hardware pin.
Bit 0: Transmit Initiate Automatic Error Insertion (TIAEI). This write-only bit initiates error insertion. See the
LI.TEPHC register definition for details of usage.
146 of 333
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
Register Name:
Register Description:
Register Address:
Bit #
Name
Default
7
TIFG7
0
LI.TIFGC
Transmit Inter-Frame Gapping Control Register
0C5h
6
TIFG6
0
5
TIFG5
0
4
TIFG4
0
3
TIFG3
0
2
TIFG2
0
1
TIFG1
0
0
TIFG0
1
Bits 7 to 0: Transmit Inter-Frame Gapping (TIFG[7:0]). These eight bits indicate the number of additional flags
and bytes of inter-frame fill to be inserted between packets. The number of flags and bytes of inter-frame fill
between packets is at least the value of TIFG[7:0] plus 1. Note: If inter-frame fill is set to all 1s, a TFIG value of 2 or
3 will result in a flag, two bytes of 1s, and an additional flag between packets.
Register Name:
Register Description:
Register Address:
Bit #
Name
Default
7
TPEN7
0
LI.TEPLC
Transmit Errored Packet Low Control Register
0C6h
6
TPEN6
0
5
TPEN5
0
4
TPEN4
0
3
TPEN3
0
2
TPEN2
0
1
TPEN1
0
0
TPEN0
0
Bits 7 to 0: Transmit Errored Packet Insertion Number (TPEN[7:0]). These eight bits indicate the total number
of errored packets to be transmitted when triggered by TIAEI. Error insertion will end after this number of errored
packets have been transmitted. A value of FFh results in continuous errored packet insertion at the specified rate.
147 of 333
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
Register Name:
Register Description:
Register Address:
Bit #
Name
Default
7
MEIMS
0
LI.TEPHC
Transmit Errored Packet High Control Register
0C7h
6
TPER6
0
5
TPER5
0
4
TPER4
0
3
TPER3
0
2
TPER2
0
1
TPER1
0
0
TPER0
0
Bit 7: Manual Error Insert Mode Select (MEIMS). When 0, the transmit manual error insertion signal (TMEI) will
not cause errors to be inserted. When 1, TMEI will cause an error to be inserted when it transitions from 0 to 1.
Note: Enabling TMEI does not disable error insertion using TCER[6:0] and TCEN[7:0].
Bits 6 to 0: Transmit Errored Packet Insertion Rate (TPER[6:0]). These seven bits indicate the rate at which
errored packets are to be output. One out of every x * 10y packets is to be an errored packet. TPER[3:0] is the
value x, and TPER[6:4] is the value y which has a maximum value of 6. If TPER[3:0] has a value of 0h errored
packet insertion is disabled. If TPER[6:4] has a value of 6xh or 7xh the errored packet rate is x * 106. A TPER[6:0]
value of 01h results in every packet being errored. A TPER[6:0] value of 0Fh results in every 15th packet being
errored. A TPER[6:0] value of 11h results in every 10th packet being errored.
To initiate automatic error insertion, use the following routine:
1)
2)
3)
4)
Configure LI.TEPLC and LI.TEPHC for the desired error insertion mode.
Write the LI.TPPCL.TIAEI bit to 1. Note that this bit is write-only.
If not using continuous error insertion (LI.TPELC is not equal to FFh), the user should monitor the
LI.TPPSR.TEPF bit for completion of the error insertion. If interrupt on completion of error insertion is
enabled (LI.TPPSRIE.TEPFIE = 1), the user only needs to wait for the interrupt condition.
Proceed with the cleanup routine listed below.
Cleanup routine:
1) Write LI.TEPLC and LI.TEPHC each to 00h.
2) Write the LI.TPPCL.TIAEI bit to 0.
148 of 333
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
Register Name:
Register Description:
Register Address:
Bit #
Name
Default
7
—
0
LI.TPPSR
Transmit Packet Processor Status Register
0C8h
6
—
0
5
—
0
4
—
0
3
—
0
2
—
0
1
—
0
0
TEPF
0
Bit 0: Transmit Errored Packet Insertion Finished (TEPF). This bit is set when the number of errored packets
indicated by the TPEN[7:0] bits in the TEPC register have been transmitted. This bit is cleared when errored
packet insertion is disabled, or a new errored packet insertion process is initiated.
Register Name:
Register Description:
Register Address:
Bit #
Name
Default
7
—
LI.TPPSRL
Transmit Packet Processor Status Register Latched
0C9h
6
—
5
—
4
—
3
—
2
—
1
—
0
TEPFL
Bit 0: Transmit Errored Packet Insertion Finished Latched (TEPFL). This bit is set when the TEPF bit in the
TPPSR register transitions from 0 to 1.
Register Name:
Register Description:
Register Address:
Bit #
Name
Default
7
—
0
LI.TPPSRIE
Transmit Packet Processor Status Register Interrupt Enable
0CAh
6
—
0
5
—
0
4
—
0
3
—
0
2
—
0
1
—
0
0
TEPFIE
0
Bit 0: Transmit Errored Packet Insertion Finished Interrupt Enable (TEPFIE). This bit enables an interrupt if
the TEPFL bit in the LI.TPPSRL register is set.
0 = interrupt disabled
1 = interrupt enabled
149 of 333
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
Register Name:
Register Description:
Register Address:
Bit #
Name
Default
7
TPC7
0
LI.TPCR0
Transmit Packet Count Byte 0
0CCh
6
TPC6
0
5
TPC5
0
4
TPC4
0
3
TPC3
0
2
TPC2
0
1
TPC1
0
0
TPC0
0
Bits 7 to 0: Transmit Packet Count (TPC[7:0]). Eight bits of 24-bit value. Register description below.
Register Name:
Register Description:
Register Address:
Bit #
Name
Default
7
TPC15
0
LI.TPCR1
Transmit Packet Count Byte 1
0CDh
6
TPC14
0
5
TPC13
0
4
TPC12
0
3
TPC11
0
2
TPC10
0
1
TPC9
0
0
TPC8
0
Bits 7 to 0: Transmit Packet Count (TPC[15:8]). Eight bits of 24-bit value. Register description below.
Register Name:
Register Description:
Register Address:
Bit #
Name
Default
7
TPC23
0
LI.TPCR2
Transmit Packet Count Byte 2
0CEh
6
TPC22
0
5
TPC21
0
4
TPC20
0
3
TPC19
0
2
TPC18
0
1
TPC17
0
0
TPC16
0
Bits 7 to 0: Transmit Packet Count (TPC[23:16]). These 24 bits indicate the number of packets extracted from
the Transmit FIFO and output in the outgoing data stream.
Register Name:
Register Description:
Register Address:
Bit #
Name
Default
7
TBC7
0
LI.TBCR0
Transmit Byte Count Byte 0
0D0h
6
TBC6
0
5
TBC5
0
4
TBC4
0
3
TBC3
0
2
TBC2
0
1
TBC1
0
0
TBC0
0
Bits 7 to 0: Transmit Byte Count (TBC[7:0]). Eight bits of 32-bit value. Register description below.
Register Name:
Register Description:
Register Address:
Bit #
Name
Default
7
TBC15
0
LI.TBCR1
Transmit Byte Count Byte 1
0D1h
6
TBC14
0
5
TBC13
0
4
TBC12
0
3
TBC11
0
2
TBC10
0
1
TBC9
0
Bits 7 to 0: Transmit Byte Count (TBC[15:8]). Eight bits of 32-bit value. Register description below.
150 of 333
0
TBC8
0
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
Register Name:
Register Description:
Register Address:
Bit #
Name
Default
7
TBC23
0
LI.TBCR2
Transmit Byte Count Byte 2
0D2h
6
TBC22
0
5
TBC21
0
4
TBC20
0
3
TBC19
0
2
TBC18
0
1
TBC17
0
0
TBC16
0
Bits 7 to 0: Transmit Byte Count (TBC[23:16]). Eight bits of 32-bit value. Register description below.
Register Name:
Register Description:
Register Address:
Bit #
Name
Default
7
TBC31
0
LI.TBCR3
Transmit Byte Count Byte 3
0D3h
6
TBC30
0
5
TBC29
0
4
TBC28
0
3
TBC27
0
2
TBC26
0
1
TBC25
0
0
TBC24
0
Bits 7 to 0: Transmit Byte Count (TBC[31:24]). These 32 bits indicate the number of packet bytes inserted in the
outgoing data stream.
Register Name:
Register Description:
Register Address:
Bit #
Name
Default
7
—
0
LI.TMEI
Transmit Manual Error Insertion
0D4h
6
—
0
5
—
0
4
—
0
3
—
0
2
—
0
1
—
0
0
TMEI
0
Bit 0: Transmit Manual Error Insertion (TMEI). A 0-to-1 transition inserts a single error in the Transmit direction.
Register Name:
Register Description:
Register Address:
Bit #
Name
Default
7
—
0
LI.THPMUU
Serial Interface Transmit HDLC PMU Update Register
0D6h
6
—
0
5
—
0
4
—
0
3
—
0
2
—
0
1
—
0
0
TPMUU
0
Bit 0: Transmit PMU Update (TPMUU). This signal causes the transmit cell/packet processor block performance
monitoring registers (counters) to be updated. A 0-to-1 transition causes the performance monitoring registers to
be updated with the latest data, and the counters reset (0 or 1). This update updates performance monitoring
counters for the Serial Interface.
Register Name:
Register Description:
Register Address:
Bit #
Name
Default
7
—
0
LI.THPMUS
Serial Interface Transmit HDLC PMU Update Status Register
0D7h
6
—
0
5
—
0
4
—
0
3
—
0
2
—
0
1
—
0
0
TPMUS
0
Bit 0: Transmit PMU Update Status (TPMUS). This bit is set when the Transmit PMU Update is completed. This
bit is cleared when TPMUU is reset.
151 of 333
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
12.5.4 X.86 Registers
X.86 transmit and common registers are used to control the operation of the X.86 encoder and decoder.
Register Name:
Register Description:
Register Address:
Bit #
Name
Default
7
—
0
LI.TX86EDE
X.86 Encoding Decoding Enable
0D8h
6
—
0
5
—
0
4
—
0
3
—
0
2
—
0
1
—
0
0
X86ED
0
Bit 0: X.86 Encoding Decoding (X86ED). If this bit is set to 1, X.86 encoding and decoding is enabled for the
Transmit and Receive paths. The MAC Frame is encapsulated in the X.86 Frame for Transmit and the X.86
headers are checked for in the received data. If X.86 functionality is selected, the X.86 receiver byte boundary is
provided by the RSYNC signal and the device provides the transmit byte synchronization TSYNC. No HDLC
encapsulation is performed.
Register Name:
Register Description:
Register Address:
Bit #
Name
Default
7
X86TRA7
0
LI.TRX86A
Transmit Receive X.86 Address
0D9h
6
X86TRA6
0
5
X86TRA5
0
4
X86TRA4
0
3
X86TRA3
0
2
X86TRA2
1
1
X86TRA1
0
0
X86TRA0
0
Bits 7 to 0: X86 Transmit Receive Address (X86TRA7 to X86TRA0). This is the address field for the X.86
transmitter and for the receiver. The register default value is 0x04.
Register Name:
Register Description:
Register Address:
Bit #
Name
Default
7
X86TRC7
0
LI.TRX8C
Transmit Receive X.86 Control
0DAh
6
X86TRC6
0
5
X86TRC5
0
4
X86TRC4
0
3
X86TRC3
0
2
X86TRC2
0
1
X86TRC1
1
0
X86TRC0
1
Bits 7 to 0: X86 Transmit Receive Control (X86TRC7 to X86TRC0). This is the control field for the X.86
transmitter and expected value for the receiver. The register is reset to 0x03
Register Name:
Register Description:
Register Address:
Bit #
Name
Default
7
TRSAPIH7
1
LI.TRX86SAPIH
Transmit Receive X.86 SAPIH
0DBh
6
TRSAPIH6
1
5
TRSAPIH5
1
4
TRSAPIH4
1
3
TRSAPIH3
1
2
TRSAPIH2
1
1
TRSAPIH1
1
0
TRSAPIH0
0
Bits 7 to 0: X86 Transmit Receive Address (TRSAPIH7 to TRSAPIH0). This is the address field for the X.86
transmitter and expected for the receiver. The register is reset to 0xfe.
152 of 333
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
Register Name:
Register Description:
Register Address:
Bit #
Name
Default
7
TRSAPIL7
0
LI.TRX86SAPIL
Transmit Receive X.86 SAPIL
0DCh
6
TRSAPIL6
0
5
TRSAPIL5
0
4
TRSAPIL4
0
3
TRSAPIL3
0
2
TRSAPIL2
0
1
TRSAPIL1
0
0
TRSAPIL0
1
Bits 7 to 0: X86 Transmit Receive Control (TRSAPIL7 to TRSAPIL0). This is the address field for the X.86
transmitter and expected value for the receiver. The register is reset to 0x01
Register Name:
Register Description:
Register Address:
Bit #
Name
Default
7
CIRE
0
LI.CIR
Committed Information Rate
0DDh
6
CIR6
0
5
CIR5
0
4
CIR4
0
3
CIR3
0
2
CIR2
0
1
CIR1
0
0
CIR0
1
Bit 7: Committed Information Rate Enable (CIRE). Set this bit to 1 to enable the Committed Information Rate
Controller feature.
Bits 6 to 0: Committed Information Rate (CIR6 to CIR0). These bits provide the value for the committed
information rate. The value is multiplied by 500kbps to get the CIR value. The user must ensure that the CIR value
is less than or equal to the maximum Serial Interface transmit rate. The valid range is from 1 to 104. Any values
outside this range will result in unpredictable behavior. Note that a value of 104 translates to a 52Mbps line rate.
Hence if the CIR is above the line rate, the rate is not restricted by the CIR. For instance, if using a T1 line and the
CIR is programmed with a value of 104, it has no effect in restricting the rate.
153 of 333
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
12.5.5 Receive Serial Interface
Serial Receive Registers are used to control the HDLC Receiver associated with each Serial Interface. Note that
throughout this document HDLC Processor is also referred to as “Packet Processor.” The receive packet
processor block has 17 registers.
Register Name:
Register Description:
Register Address:
Bit #
Name
Default
7
—
0
LI.RPPCL
Receive Packet Processor Control Low Register
101h
6
—
0
5
RFPD
0
4
RF16
0
3
RFED
0
2
RDD
0
1
RBRE
0
0
RCCE
0
Bit 5: Receive FCS Processing Disable (RFPD). When equal to 0, FCS processing is performed and FCS is
appended to packets. When set to 1, FCS processing is disabled (the packets do not have an FCS appended). In
X.86 mode, FCS processing is always enabled.
Bit 4: Receive FCS-16 Enable (RF16). When 0, the error checking circuit uses a 32-bit FCS. When 1, the error
checking circuit uses a 16-bit FCS. This bit is ignored when FCS processing is disabled. In X.86 mode, the FCS is
always 32 bits.
Bit 3: Receive FCS Extraction Disable (RFED). When 0, the FCS bytes are discarded. When 1, the FCS bytes
are passed on. This bit is ignored when FCS processing is disabled. In X.86 mode, FCS bytes are discarded.
Bit 2: Receive Descrambling Disable (RDD). When equal to 0, X43 + 1 descrambling is performed. When set to
1, descrambling is disabled.
Bit 1: Receive Bit Reordering Enable (RBRE). When equal to 0, reordering is disabled and the first bit received
is expected to be the MSB DT [7] of the byte. When set to 1, bit reordering is enabled and the first bit received is
expected to be the LSB DT [0] of the byte. Note that function is controlled by the BREO in Hardware Mode.
Bit 0: Receive Clear Channel Enable (RCCE). When equal to 0, packet processing is enabled. When set to 1, the
device is in clear channel mode and all packet-processing functions except descrambling and bit reordering are
disabled.
Register Name:
Register Description:
Register Address:
Bit #
Name
Default
7
RMX7
1
LI.RMPSCL
Receive Maximum Packet Size Control Low Register
102h
6
RMX6
1
5
RMX5
1
4
RMX4
0
3
RMX3
0
2
RMX2
0
1
RMX1
0
0
RMX0
0
Bits 7 to 0: Receive Maximum Packet Size (RMX[7:0]). Eight bits of a 16-bit value. Register description below.
154 of 333
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
Register Name:
Register Description:
Register Address:
Bit #
Name
Default
7
RMX15
0
LI.RMPSCH
Receive Maximum Packet Size Control High Register
103h
6
RMX14
0
5
RMX13
0
4
RMX12
0
3
RMX11
0
2
RMX10
1
1
RMX9
1
0
RMX8
1
Bits 7 to 0: Receive Maximum Packet Size (RMX[15:8]) These 16 bits indicate the maximum allowable packet
size in bytes. The size includes the FCS bytes, but excludes bit/byte stuffing. Note: If the maximum packet size is
less than the minimum packet size, all packets are discarded. When packet processing is disabled, these sixteen
bits indicate the "packet" size the incoming data is to be broken into.
The maximum packet size allowable is 2016 bytes plus the FCS bytes. Any values programmed that are greater
than 2016 + FCS will have the same effect as 2016+ FCS value.
In X.86 mode, the X.86 encapsulation bytes are included in maximum size control.
Register Name:
Register Description:
Register Address:
Bit #
Name
Default
7
—0
LI.RPPSR
Receive Packet Processor Status Register
104h
6
—
0
5
0
4
—
0
3
0
2
REPC
0
1
RAPC
0
0
RSPC
0
Bit 2: Receive FCS Errored Packet Count (REPC). This read-only bit indicates that the receive FCS errored
packet count is non-zero.
Bit 1: Receive Aborted Packet Count (RAPC). This read-only bit indicates that the receive aborted packet count
is non-zero.
Bit 0: Receive Size Violation Packet Count (RSPC). This read-only bit indicates that the receive size violation
packet count is non-zero.
155 of 333
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
Register Name:
Register Description:
Register Address:
Bit #
Name
Default
7
REPL
—
LI.RPPSRL
Receive Packet Processor Status Register Latched
105h
6
RAPL
—-
5
RIPDL
—
4
RSPDL
—-
3
RLPDL
—
2
REPCL
—-
1
RAPCL
—
0
RSPCL
—-
Bit 7: Receive FCS Errored Packet Latched (REPL). This bit is set when a packet with an errored FCS is
detected.
Bit 6: Receive Aborted Packet Latched (RAPL). This bit is set when a packet with an abort indication is
detected.
Bit 5: Receive Invalid Packet Detected Latched (RIPDL). This bit is set when a packet with a non-integer
number of bytes is detected.
Bit 4: Receive Small Packet Detected Latched (RSPDL). This bit is set when a packet smaller than the minimum
packet size is detected.
Bit 3: Receive Large Packet Detected Latched (RLPDL). This bit is set when a packet larger than the maximum
packet size is detected.
Bit 2: Receive FCS Errored Packet Count Latched (REPCL). This bit is set when the REPC bit in the RPPSR
register transitions from zero to one.
Bit 1: Receive Aborted Packet Count Latched (RAPCL). This bit is set when the RAPC bit in the RPPSR
register transitions from zero to one.
Bit 0: Receive Size Violation Packet Count Latched (RSPCL). This bit is set when the RSPC bit in the RPPSR
register transitions from zero to one.
156 of 333
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
Register Name:
Register Description:
Register Address:
Bit #
Name
Default
7
REPIE
0
LI.RPPSRIE
Receive Packet Processor Status Register Interrupt Enable
106h
6
RAPIE
0
5
RIPDIE
0
4
RSPDIE
0
3
RLPDIE
0
2
REPCIE
0
1
RAPCIE
0
0
RSPCIE
0
Bit 7: Receive FCS Errored Packet Interrupt Enable (REPIE). This bit enables an interrupt if the REPL bit in the
LI.RPPSRL register is set.
0 = interrupt disabled
1 = interrupt enabled
Bit 6: Receive Aborted Packet Interrupt Enable (RAPIE). This bit enables an interrupt if the RAPL bit in the
LI.RPPSRL register is set.
0 = interrupt disabled
1 = interrupt enabled
Bit 5: Receive Invalid Packet Detected Interrupt Enable (RIPDIE). This bit enables an interrupt if the RIPDL bit
in the LI.RPPSRL register is set.
0 = interrupt disabled
1 = interrupt enabled
Bit 4: Receive Small Packet Detected Interrupt Enable (RSPDIE). This bit enables an interrupt if the RSPDL bit
in the LI.RPPSRL register is set.
0 = interrupt disabled
1 = interrupt enabled
Bit 3: Receive Large Packet Detected Interrupt Enable (RLPDIE) This bit enables an interrupt if the RLPDL bit
in the LI.RPPSRL register is set.
0 = interrupt disabled
1 = interrupt enabled
Bit 2: Receive FCS Errored Packet Count Interrupt Enable (REPCIE). This bit enables an interrupt if the
REPCL bit in the LI.RPPSRL register is set. Must be set low when the packets do not have an FCS appended.
0 = interrupt disabled
1 = interrupt enabled
Bit 1: Receive Aborted Packet Count Interrupt Enable (RAPCIE). This bit enables an interrupt if the RAPCL bit
in the LI.RPPSRL register is set.
0 = interrupt disabled
1 = interrupt enabled
Bit 0: Receive Size Violation Packet Count Interrupt Enable (RSPCIE). This bit enables an interrupt if the
RSPCL bit in the LI.RPPSRL register is set.
0 = interrupt disabled
1 = interrupt enabled
157 of 333
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
Register Name:
Register Description:
Register Address:
Bit #
Name
Default
7
RPC7
0
LI.RPCB0
Receive Packet Count Byte 0 Register
108h
6
RPC6
0
5
RPC5
0
4
RPC4
0
3
RPC3
0
2
RPC2
0
1
RPC1
0
0
RPC0
0
Bits 7 to 0: Receive Packet Count (RPC [7:0]). Eight bits of a 24-bit value. Register description below.
Register Name:
Register Description:
Register Address:
Bit #
Name
Default
7
RPC15
0
LI.RPCB1
Receive Packet Count Byte 1 Register
109h
6
RPC14
0
5
RPC13
0
4
RPC12
0
3
RPC11
0
2
RPC10
0
1
RPC09
0
0
RPC08
0
Bits 7 to 0: Receive Packet Count (RPC [15:8]). Eight bits of a 24-bit value. Register description below.
Register Name:
Register Description:
Register Address:
Bit #
Name
Default
7
RPC23
0
LI.RPCB2
Receive Packet Count Byte 2 Register
10Ah
6
RPC22
0
5
RPC21
0
4
RPC20
0
3
RPC19
0
2
RPC18
0
1
RPC17
0
0
RPC16
0
Bits 7 to 0: Receive Packet Count (RPC [23:16]). These 24 bits indicate the number of packets stored in the
receive FIFO without an abort indication. Note: Packets discarded due to system loopback or an overflow condition
are included in this count. This register is valid when clear channel is enabled.
158 of 333
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
Register Name:
Register Description:
Register Address:
Bit #
Name
Default
7
RFPC7
0
LI.RFPCB0
Receive FCS Errored Packet Count Byte 0 Register
10Ch
6
RFPC6
0
5
RFPC5
0
4
RFPC4
0
3
RFPC3
0
2
RFPC2
0
1
RFPC1
0
0
RFPC0
0
Bits 7 to 0: Receive FCS Errored Packet Count (RFPC[7:0]). Eight bits of a 24-bit value. Register description
below.
Register Name:
Register Description:
Register Address:
Bit #
Name
Default
7
RFPC15
0
LI.RFPCB1
Receive FCS Errored Packet Count Byte 1 Register
10Dh
6
RFPC14
0
5
RFPC13
0
4
RFPC12
0
3
RFPC11
0
2
RFPC10
0
1
RFPC9
0
0
RFPC8
0
Bits 7 to 0: Receive FCS Errored Packet Count (RFPC[15:8]). Eight bits of a 24-bit value. Register description
below.
Register Name:
Register Description:
Register Address:
Bit #
Name
Default
7
RFPC23
0
LI.RFPCB2
Receive FCS Errored Packet Count Byte 2 Register
10Eh
6
RFPC22
0
5
RFPC21
0
4
RFPC20
0
3
RFPC19
0
2
RFPC18
0
1
RFPC17
0
0
RFPC16
0
Bits 7 to 0: Receive FCS Errored Packet Count (RFPC[23:16]). These 24 bits indicate the number of packets
received with an FCS error. The byte count for these packets is included in the receive aborted byte count register
REBCR.
159 of 333
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
Register Name:
Register Description:
Register Address:
Bit #
Name
Default
7
RAPC7
0
LI.RAPCB0
Receive Aborted Packet Count Byte 0 Register
110h
6
RAPC6
0
5
RAPC5
0
4
RAPC4
0
3
RAPC3
0
2
RAPC2
0
1
RAPC1
0
0
RAPC0
0
Bits 7 to 0: Receive Aborted Packet Count (RAPC [7:0]). Eight bits of a 24-bit value. Register description below.
Register Name:
Register Description:
Register Address:
Bit #
Name
Default
7
RAPC15
0
LI.RAPCB1
Receive Aborted Packet Count Byte 1 Register
111h
6
RAPC14
0
5
RAPC13
0
4
RAPC12
0
3
RAPC11
0
2
RAPC10
0
1
RAPC9
0
0
RAPC8
0
Bits 7 to 0: Receive Aborted Packet Count (RAPC[15:8]). Eight bits of a 24-bit value. Register description
below.
Register Name:
Register Description:
Register Address:
Bit #
Name
Default
7
RAPC23
0
LI.RAPCB2
Receive Aborted Packet Count Byte 2 Register
112h
6
RAPC22
0
5
RAPC21
0
4
RAPC20
0
3
RAPC19
0
2
RAPC18
0
1
RAPC17
0
0
RAPC16
0
Bits 7 to 0: Receive Aborted Packet Count (RAPC [23:16]). The 24-bit value from these three registers indicates
the number of packets received with a packet abort indication. The byte count for these packets is included in the
receive aborted byte count register REBCR.
160 of 333
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
Register Name:
Register Description:
Register Address:
Bit #
Name
Default
7
RSPC7
0
LI.RSPCB0
Receive Size Violation Packet Count Byte 0 Register
114h
6
RSPC6
0
5
RSPC5
0
4
RSPC4
0
3
RSPC3
0
2
RSPC2
0
1
RSPC1
0
0
RSPC0
0
Bits 7 to 0: Receive Size Violation Packet Count (RSPC [7:0]). Eight bits of a 24-bit value. Register description
below.
Register Name:
Register Description:
Register Address:
Bit #
Name
Default
7
RSPC15
0
LI.RSPCB1
Receive Size Violation Packet Count Byte 1 Register
115h
6
RSPC14
0
5
RSPC13
0
4
RSPC12
0
3
RSPC11
0
2
RSPC10
0
1
RSPC9
0
0
RSPC8
0
Bits 7 to 0: Receive Size Violation Packet Count (RSPC [15:8]). Eight bits of a 24-bit value. Register description
below.
Register Name:
Register Description:
Register Address:
Bit #
Name
Default
7
RSPC23
0
LI.RSPCB2
Receive Size Violation Packet Count Byte 2 Registers
116h
6
RSPC22
0
5
RSPC21
0
4
RSPC20
0
3
RSPC19
0
2
RSPC18
0
1
RSPC17
0
0
RSPC16
0
Bits 7 to 0: Receive Size Violation Packet Count (RSPC [23:16]). These 24 bits indicate the number of packets
received with a packet size violation (below minimum, above maximum, or non-integer number of bytes). The byte
count for these packets is included in the receive aborted byte count register REBCR.
161 of 333
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
Register Name:
Register Description:
Register Address:
Bit #
Name
Default
7
RBC7
0
LI.RBC0
Receive Byte Count 0 Register
118h
6
RBC6
0
5
RBC5
0
4
RBC4
0
3
RBC3
0
2
RBC2
0
1
RBC1
0
0
RBC0
0
Bits 7 to 0: Receive Byte Count (RBC [7:0]). Eight bits of a 32-bit value. Register description below.
Register Name:
Register Description:
Register Address:
Bit #
Name
Default
7
RBC15
0
LI.RBC1
Receive Byte Count 1 Register
119h
6
RBC14
0
5
RBC13
0
4
RBC12
0
3
RBC11
0
2
RBC10
0
1
RBC9
0
0
RBC8
0
Bits 7 to 0: Receive Byte Count (RBC [15:8]). Eight bits of a 32-bit value. Register description below.
Register Name:
Register Description:
Register Address:
Bit #
Name
Default
7
RBC23
0
LI.RBC2
Receive Byte Count 2 Register
11Ah
6
RBC22
0
5
RBC21
0
4
RBC20
0
3
RBC19
0
2
RBC18
0
1
RBC17
0
0
RBC16
0
Bits 7 to 0: Receive Byte Count (RBC [23:16]). Eight bits of a 32-bit value. Register description below.
Register Name:
Register Description:
Register Address:
Bit #
Name
Default
7
RBC31
0
LI.RBC3
Receive Byte Count 3 Register
11Bh
6
RBC30
0
5
RBC29
0
4
RBC28
0
3
RBC27
0
2
RBC26
0
1
RBC25
0
0
RBC24
0
Bits 7 to 0: Receive Byte Count (RBC [31:24]). These 32 bits indicate the number of bytes contained in packets
stored in the receive FIFO without an abort indication. Note: Bytes discarded due to FCS extraction, system
loopback, FIFO reset, or an overflow condition may be included in this count.
162 of 333
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
Register Name:
Register Description:
Register Address:
Bit #
Name
Default
7
REBC7
0
LI.RAC0
Receive Aborted Byte Count 0 Register
11Ch
6
REBC6
0
5
REBC5
0
4
REBC4
0
3
REBC3
0
2
REBC2
0
1
REBC1
0
0
REBC0
0
Bits 7 to 0: Receive Aborted Byte Count (RBC [7:0]). Eight bits of a 32-bit value. Register description below.
Register Name:
Register Description:
Register Address:
Bit #
Name
Default
7
REBC15
0
LI.RAC1
Receive Aborted Byte Count 1 Register
11Dh
6
REBC14
0
5
REBC13
0
4
REBC12
0
3
REBC11
0
2
REBC10
0
1
REBC9
0
0
REBC8
0
Bits 7 to 0: Receive Aborted Byte Count (RBC [15:8]). Eight bits of a 32-bit value. Register description below.
Register Name:
Register Description:
Register Address:
Bit #
Name
Default
7
REBC23
0
LI.RAC2
Receive Aborted Byte Count 2 Register
11Eh
6
REBC22
0
5
REBC21
0
4
REBC20
0
3
REBC19
0
2
REBC18
0
1
REBC17
0
0
REBC16
0
Bits 7 to 0: Receive Aborted Byte Count (RBC [23:16]). Eight bits of a 32-bit value. Register description below.
Register Name:
Register Description:
Register Address:
Bit #
Name
Default
7
REBC31
0
LI.RAC3
Receive Aborted Byte Count 3 Register
11Fh
6
REBC30
0
5
REBC29
0
4
REBC28
0
3
REBC27
0
2
REBC26
0
1
REBC25
0
0
REBC24
0
Bits 7 to 0: Receive Aborted Byte Count (REBC[31:24]). These 32 bits indicate the number of bytes contained
in packets stored in the receive FIFO with an abort indication. Note: Bytes discarded due to FCS extraction, system
loopback, FIFO reset, or an overflow condition may be included in this count.
163 of 333
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
Register Name:
Register Description:
Register Address:
Bit #
Name
Default
7
—0
LI.RHPMUU
Serial Interface Receive HDLC PMU Update Register
120h
6
—
0
5
—0
4
—
0
3
—0
2
—
0
1
—0
0
RPMUU
0
Bit 0: Receive PMU Update (RPMUU). This signal causes the receive cell/packet processor block performance
monitoring registers to be updated. A 0 to 1 transition causes the performance monitoring registers to be updated
with the latest data, and resets the associated counters. This bit updates performance monitoring counters for the
Serial Interface.
Register Name:
Register Description:
Register Address:
Bit #
Name
Default
7
—
0
LI.RHPMUS
Serial Interface Receive HDLC PMU Update Status Register
121h
6
—0
5
—
0
4
—0
3
—
0
2
—0
1
—
0
0
RPMUUS
0
Bit 0: Receive PMU Update Status (RPMUUS). This bit is set when the Transmit PMU Update is completed. This
bit is cleared when RPMUU is set to 0.
Register Name:
Register Description:
Register Address:
Bit #
Name
Default
7
—
—
LI.RX86S
Receive X.86 Latched Status Register
122h
6
——-
5
—
—
4
——-
3
SAPIHNE
—
2
SAPILNE
—-
1
CNE
—
0
ANE
—-
Bit 3: SAPI High Not Equal to LI.TRX86SAPIH Latched Status (SAPIHNE). This latched status bit is set if
SAPIH is not equal to LI.TRX86SAPIH. This latched status bit is cleared upon read.
Bit 2: SAPI Low Not Equal to LI.TRX86SAPIL Latched Status (SAPILNE). This latched status bit is set if SAPIL
is not equal to LI.TRX86SAPIL. This latched status bit is cleared upon read.
Bit 1: Control Not Equal to LI.TRX8C (CNE). This latched status bit is set if the control field is not equal to
LI.TRX8C. This latched status bit is cleared upon read.
Bit 0: Address Not Equal to LI.TRX86A (ANE). This latched status bit is set if the X.86 Address field is not equal
to LI.TRX86A. This latched status bit is cleared upon read.
164 of 333
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
Register Name:
Register Description:
Register Address:
Bit #
Name
Default
LI.RX86LSIE
Receive X.86 Interrupt Enable
123h
7
6
5
4
3
2
—
—-
—
—-
SAPINE01IM
SAPINEFEIM
0
0
0
0
0
0
1
CNE3LI
M
0
0
ANE4IM
0
Bit 3: SAPI Octet Not Equal to LI.TRX86SAPIH Interrupt Enable (SAPINE01IM). If this bit is set to 1,
LI.RX86S.SAPIHNE generates an interrupt.
Bit 2: SAPI Octet Not Equal to LI.TRX86SAPIL Interrupt Enable (SAPINEFEIM). If this bit is set to 1,
LI.RX86S.SAPILNE generates an interrupt.
Bit 1: Control Not Equal to LI.TRX8C Interrupt Enable (CNE3LIM). If this bit is set to 1, LI.RX86S.CNE
generates an interrupt.
Bit 0: Address Not Equal to LI.TRX86A Interrupt Enable (ANE4IM). If this bit is set to 1, LI.RX86S.ANE
generates an interrupt.
Register Name:
Register Description:
Register Address:
Bit #
Name
Default
7
TQLT7
0
LI.TQLT
Serial Interface Transmit Queue Low Threshold (Watermark)
124h
6
TQLT6
0
5
TQLT5
0
4
TQLT4
0
3
TQLT3
0
2
TQLT2
0
1
TQLT1
0
0
TQLT0
0
Bits 7 to 0: Transmit Queue Low Threshold (TQLT[7:0]). The transmit queue low threshold for the connection,
in increments of 32 packets of 2048 bytes each. The value of this register is multiplied by 32 x 2048 bytes to
determine the byte location of the threshold. Note that the transmit queue is for data that was received from the
Serial Interface to be sent to the Ethernet Interface.
Register Name:
Register Description:
Register Address:
Bit #
Name
Default
7
TQHT7
0
LI.TQHT
Serial Interface Transmit Queue High Threshold (Watermark)
125h
6
TQHT6
0
5
TQHT5
0
4
TQHT4
0
3
TQHT3
0
2
TQHT2
0
1
TQHT1
0
0
TQHT0
0
Bits 7 to 0: Transmit Queue High Threshold (TQHT[7:0]). The transmit queue high threshold for the connection,
in increments of 32 packets of 2048 bytes each. The value of this register is multiplied by 32 x 2048 bytes to
determine the byte location of the threshold. Note that the transmit queue is for data that was received from the
Serial Interface to be sent to the Ethernet Interface.
165 of 333
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
Register Name:
Register Description:
Register Address:
Bit #
Name
Default
7
—0
LI.TQTIE
Serial Interface Transmit Queue Cross Threshold Interrupt Enable
126h
6
—0
5
—0
4
—0
3
TFOVFIE
0
2
TQOVFIE
0
1
TQHTIE
0
0
TQLTIE
0
Bit 3: Transmit FIFO Overflow for Connection Interrupt Enable (TFOVFIE). If this bit is set, the watermark
interrupt is enabled for TFOVFLS.
Bit 2: Transmit Queue Overflow for Connection Interrupt Enable (TQOVFIE). If this bit is set, the watermark
interrupt is enabled for TQOVFLS.
Bit 1: Transmit Queue for Connection High Threshold Interrupt Enable (TQHTIE). If this bit is set, the
watermark interrupt is enabled for TQHTS.
Bit 0: Transmit Queue for Connection Low Threshold Interrupt Enable (TQLTIE). If this bit is set, the
watermark interrupt is enabled for TQLTS.
Register Name:
Register Description:
Register Address:
Bit #
Name
Default
7
——-
LI.TQCTLS
Serial Interface Transmit Queue Cross Threshold Latched Status
127h
6
——-
5
——-
4
——-
3
TFOVFLS
—-
2
TQOVFLS
—-
1
TQHTLS
—-
0
TQLTLS
—-
Bit 3: Transmit Queue FIFO Overflowed Latched Status (TFOVFLS). This bit is set if the transmit queue FIFO
has overflowed. This register is cleared after a read. This FIFO is for data to be transmitted from the HDLC to be
sent to the SDRAM.
Bit 2: Transmit Queue Overflow Latched Status (TQOVFLS). This bit is set if the transmit queue has
overflowed. This register is cleared after a read.
Bit 1: Transmit Queue for Connection Exceeded High Threshold Latched Status (TQHTLS). This bit is set if
the transmit queue crosses the high watermark. This register is cleared after a read.
Bit 0: Transmit Queue for Connection Exceeded Low Threshold Latched Status (TQLTLS). This bit is set if
the transmit queue crosses the low watermark. This register is cleared after a read.
166 of 333
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
12.6 Ethernet Interface Registers
The Ethernet Interface registers are used to configure RMII/MII bus operation and establish the MAC parameters
as required by the user. The MAC Registers cannot be addressed directly from the processor port. The registers
below are used to perform indirect read or write operations to the MAC registers. The MAC Status Registers are
shown in Table 12-6. Accessing the MAC Registers is described in Section 9.13.
12.6.1 Ethernet Interface Register Bit Descriptions
Register Name:
Register Description:
Register Address:
Bit #
Name
Default
7
MACRA7
0
SU.MACRADL
MAC Read Address Low Register
140h
6
MACRA6
0
5
MACRA5
0
4
MACRA4
0
3
MACRA3
0
2
MACRA2
0
1
MACRA1
0
0
MACRA0
0
Bits 7 to 0: MAC Read Address (MACRA7 to MACRA0). Low byte of the MAC address. Used only for read
operations.
Register Name:
Register Description:
Register Address:
Bit #
Name
Default
7
MACRA15
0
SU.MACRADH
MAC Read Address High Register
141h
6
MACRA14
0
5
MACRA13
0
4
MACRA12
0
3
MACRA11
0
2
MACRA10
0
1
MACRA9
0
0
MACRA8
0
Bits 7 to 0: MAC Read Address (MACRA15 to MACRA0). High byte of the MAC address. Used only for read
operations.
Register Name:
Register Description:
Register Address:
Bit #
Name
Default
7
MACRD7
0
SU.MACRD0
MAC Read Data Byte 0
142h
6
MACRD6
0
5
MACRD5
0
4
MACRD4
0
3
MACRD3
0
2
MACRD2
0
1
MACRD1
0
0
MACRD0
0
Bits 7 to 0: MAC Read Data 0 (MACRD7 to MACRD0). One of four bytes of data read from the MAC. Valid after a
read command has been issued and the SU.MACRWC.MCS bit is zero.
Register Name:
Register Description:
Register Address:
Bit #
Name
Default
SU.MACRD1
MAC Read Data Byte 1
143h
7
6
5
4
3
2
MACRD15 MACRD14 MACRD13 MACRD12 MACRD11 MACRD10
0
0
0
0
0
0
1
MACRD9
0
0
MACRD8
0
Bits 7 to 0: MAC Read Data 1 (MACRD15 to MACRD0). One of four bytes of data read from the MAC. Valid after
a read command has been issued and the SU.MACRWC.MCS bit is zero.
167 of 333
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
Register Name:
Register Description:
Register Address:
Bit #
Name
Default
SU.MACRD2
MAC Read Data Byte 2
144h
7
6
5
4
3
2
1
0
MACRD23 MACRD22 MACRD21 MACRD20 MACRD19 MACRD18 MACRD17 MACRD16
0
0
0
0
0
0
0
0
Bits 7 to 0: MAC Read Data 2 (MACRD23 to MACRD16). One of four bytes of data read from the MAC. Valid
after a read command has been issued and the SU.MACRWC.MCS bit is zero.
Register Name:
Register Description:
Register Address:
Bit #
Name
Default
SU.MACRD3
MAC Read Data Byte 3
145h
7
6
5
4
3
2
1
0
MACRD31 MACRD30 MACRD29 MACRD28 MACRD27 MACRD26 MACRD25 MACRD24
0
0
0
0
0
0
0
0
Bits 7 to 0: MAC Read Data 3 (MACRD31 to MACRD24). One of four bytes of data read from the MAC. Valid
after a read command has been issued and the SU.MACRWC.MCS bit is zero.
Register Name:
Register Description:
Register Address:
Bit #
Name
Default
7
MACWD7
0
SU.MACWD0
MAC Write Data 0
146h
6
MACWD6
0
5
MACWD5
0
4
MACWD4
0
3
MACWD3
0
2
MACWD2
0
1
MACWD1
0
0
MACWD0
0
Bits 7 to 0: MAC Write Data 0 (MACWD7 to MACWD0). One of four bytes of data to be written to the MAC. Data
has been written after a write command has been issued and the SU.MACRWC.MCS bit is zero.
Register Name:
Register Description:
Register Address:
Bit #
Name
Default
SU.MACWD1
MAC Write Data 1
147h
7
6
5
4
3
2
1
0
MACWD15 MACWD14 MACWD13 MACWD12 MACWD11 MACWD10 MACWD09 MACWD08
0
0
0
0
0
0
0
0
Bits 7 to 0: MAC Write Data 1 (MACWD15 to MACWD8). One of four bytes of data to be written to the MAC.
Data has been written after a write command has been issued and the SU.MACRWC.MCS bit is zero.
Register Name:
Register Description:
Register Address:
Bit #
Name
Default
SU.MACWD2
MAC Write Data 2
148h
7
6
5
4
3
2
1
0
MACWD23 MACWD22 MACWD21 MACWD20 MACWD19 MACWD18 MACWD17 MACWD16
0
0
0
0
0
0
0
0
Bits 7 to 0: MAC Write Data 2 (MACWD23 to MACWD16). One of four bytes of data to be written to the MAC.
Data has been written after a write command has been issued and the SU.MACRWC.MCS bit is zero.
168 of 333
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
Register Name:
Register Description:
Register Address:
Bit #
Name
Defaullt
7
MACD31
0
SU.MACWD3
MAC Write Data 3
149h
6
MACD30
0
5
MACD29
0
4
MACD28
0
3
MACD27
0
2
MACD26
0
1
MACD25
0
0
MACD24
0
Bits 7 to 0: MAC Write Data 3 (MACD31 to MACD24). One of four bytes of data to be written to the MAC. Data
has been written after a write command has been issued and the SU.MACRWC.MCS bit is zero.
Register Name:
Register Description:
Register Address:
Bit #
Name
Default
7
MACAW7
0
SU.MACAWL
MAC Address Write Low
14Ah
6
MACAW6
0
5
MACAW5
0
4
MACAW4
0
3
MACAW3
0
2
MACAW2
0
1
MACAW1
0
0
MACAW0
0
Bits 7 to 0: MAC Write Address (MACAW7 to MACAW0). Low byte of the MAC address. Used only for write
operations.
Register Name:
Register Description:
Register Address:
Bit #
Name
Default
SU.MACAWH
MAC Address Write High
14Bh
7
6
5
4
3
2
MACAW15 MACAW14 MACAW13 MACAW12 MACAW11 MACAW10
0
0
0
0
0
0
1
MACAW9
0
0
MACAW8
0
Bits 7 to 0: MAC Write Address (MACAW15 to MACAW8). High byte of the MAC address. Used only for write
operations.
Register Name:
Register Description:
Register Address:
Bit #
Name
Default
7
—
0
SU.MACRWC
MAC Read Write Command Status
14Ch
6
—
0
5
—
0
4
—
0
3
—
0
2
—
0
1
MCRW
0
0
MCS
0
Bit 1: MAC Command RW (MCRW). If this bit is written to 1, a read is performed from the MAC. If this bit is
written to 0, a write operation is performed. Address information for write operations must be located in
SU.MACAWH and SU.MACAWL. Address information for read operations must be located in SU.MACRADH and
SU.MACRADL. The user must also write a 1 to the MCS bit, and the device will clear MCS when the operation is
complete.
Bit 0: MAC Command Status (MCS). Setting MCS in conjunction with MCRW will initiate a read or write to the
MAC registers. Upon completion of the read or write this bit is cleared. Once a read or write command has been
initiated the host must poll this bit to see when the operation is complete.
169 of 333
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
Register Name:
Register Description:
Register Address:
Bit #
Name
Default
7
—
0
SU.LPBK
Ethernet Interface Loopback Control Register
14Fh
6
—
0
5
—
0
4
—
0
3
—
0
2
—
0
1
—
0
0
QLP
0
Bit 0: Queue Loopback Enable (QLP). If this bit is set to 1, data from the Ethernet Interface receive queue is
looped back to the transmit queue. Buffered data from the serial interface will remain until the loopback is removed.
Register Name:
Register Description:
Register Address:
Bit #
Name
Default
7
—
0
SU.GCR
Ethernet Interface General Control Register
150h
6
—
0
5
—
0
4
—
0
3
CRCS
0
2
H10S
0
1
ATFLOW
1
0
JAME
0
Bit 3: CRCS. If this bit is zero (default), the received MAC or Ethernet Frame CRC is stripped before the data is
encapsulated and transmitted on the serial interface. Data received from the serial interface is decapsulated, a
CRC is recalculated and appended to the packet for transmission to the Ethernet interface. If this bit is set to 1, the
CRC is not stripped from received packets prior to encapsulation and transmission to the serial interface, and data
received from the serial interface is decapsulated directly. No CRC recalculation is performed on data received
from the serial interface. Note that the maximum packet size supported by the Ethernet interface is still 2016 (this
includes the 4 bytes of CRC).
Bit 2: H10S. If this bit is set the MAC will operate at 100Mbps. If this bit is zero, the MAC will operate at 10Mbps.
This bit controls the 10/100 selection for RMII and DCE Mode. In DTE and MII mode, the MAC determines the data
rate from the incoming TX_CLK and RX_CLK.
Bit 1: Automatic Flow Control Enable (ATFLOW). If this bit is set to 1, automatic flow control is enabled based
on the connection receive queue size and high watermarks. Pause frames are sent automatically in full duplex
mode. The pause time must be programmed through SU.MACFCR. The jam sequence will not be sent
automatically in half duplex mode unless the JAME bit is set. This bit is applicable only in software mode.
Bit 0: Jam Enable (JAME.) If this bit is set to 1, a Jam sequence is sent for a duration of 4 bytes. This function is
only valid in half duplex mode, and will only function if Automatic Flow Control is disabled. Note that if the receive
queue size is less than receive high threshold, setting a JAME will JAM one received frame. If JAME is set and the
receiver queue size is higher than the high threshold, all received frames are jammed until the queue empties
below the threshold.
Note that SU.GCR is only valid in the software mode. In hardware mode, pins are used to control Automatic flow
control and 100/10-speed selection.
170 of 333
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
Register Name:
Register Description:
Register Address:
Bit #
Name
Default
7
—
0
SU.TFRC
Transmit Frame Resend Control
151h
6
—
0
5
—
0
4
—
0
3
NCFQ
0
2
TPDFCB
0
1
TPRHBC
0
0
TPRCB
0
Bit 3: No Carrier Queue Flush Bar (NCFQ). If this bit is set to 1, the queue for data passing from Serial Interface
to Ethernet Interface will not be flushed when loss of carrier is detected.
Bit 2: Transmit Packet Deferred Fail Control Enable (TPDFCB). If this bit if set to 1, the current frame is
transmitted immediately instead of being deferred. If this bit is set to 0, the frame is deferred if CRS is asserted and
sent when the CRS is unasserted indicating the media is idle.
Bit 1: Transmit Packet HB Fail Control Bar (TPRHBC). If this bit is set to 1, the current frame will not be
retransmitted if a heartbeat failure is detected.
Bit 0: Transmit Packet Resend Control Bar (TPRCB). If this bit is set to 1, the current frame will not be
retransmitted if any of the following errors have occurred:
• Jabber timeout
• Loss of carrier
• Excessive deferral
• Late collision
• Excessive collisions
• Under run
• Collision
Note that blocking retransmission due to collision (applicable in MIII/Half Duplex Mode) can result in unpredictable
system level behavior.
171 of 333
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
Register Name:
Register Description:
Register Address:
Bit #
Name
Default
7
UR
0
SU.TFSL
Transmit Frame Status Low
152h
6
EC
0
5
LC
0
4
ED
0
3
LOC
0
2
NOC
0
1
—0
0
FABORT
0
Bit 7: Under Run (UR). When this bit is set to 1, the frame was aborted due to a data under run condition of the
transmit buffer.
Bit 6: Excessive Collisions (EC). When this bit is set to 1, a frame has been aborted after 16 successive
collisions while attempting to transmit the current frame. If the Disable Retry bit is set to 1, then Excessive
Collisions will be set to 1 after the first collision.
Bit 5: Late Collision (LC). When this bit is set to 1, a frame was aborted by collision after the 64 bit collision
window. Not valid if an under run has occurred.
Bit 4: Excessive Deferral (ED). When this bit is set to 1, a frame was aborted due to excessive deferral.
Bit 3: Loss Of Carrier (LOC). When this bit is set to 1, a frame was aborted due to loss of carrier for one or more
bit times. Valid only for non-collided frames. Valid only in half-duplex operation.
Bit 2: No Carrier (NOC). When this bit is set to 1, a frame was aborted because no carrier was found for
transmission.
Bit 1: Reserved.
Bit 0: Frame Abort (FABORT). When this bit is set to 1, the MAC has aborted a frame for one of the above
reasons. When this bit is clear, the previous frame has been transmitted successfully.
Register Name:
Register Description:
Register Address:
Bit #
Name
Default
7
PR
0
SU.TFSH
Transmit Frame Status High
153h
6
HBF
0
5
CC3
0
4
CC2
0
3
CC1
0
2
CC0
0
1
LCO
0
0
DEF
0
Bit 7: Packet Resend (PR). When this bit is set, the current packet must be retransmitted due to a collision.
Bit 6: Heartbeat Failure (HBF). When this bit is set, the device failed to detect a heart beat after transmission.
This bit is not valid if an under run has occurred.
Bits 5 to 2: Collision Count (CC3 to CC0). These four bits indicate the number of collisions that occurred prior to
successful transmission of the previous frame. Not valid if Excessive Collisions is set to 1.
Bit 1: Late Collision (LCO). When set to 1, the MAC observed a collision after the 64-byte collision window.
Bit 0: Deferred Frame (DEF). When set to 1, the current frame was deferred due to carrier assertion by another
node after being ready to transmit.
172 of 333
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
Register Name:
Register Description:
Register Address:
Bit #
Name
Default
7
FL7
0
SU.RFSB0
Receive Frame Status Byte 0
154h
6
FL6
0
5
FL5
0
4
FL4
0
3
FL3
0
2
FL2
0
1
FL1
0
0
FL0
0
Bits 7 to 0: Frame Length (FL[7:0]). These eight bits are the low byte of the length (in bytes) of the received
frame, with FCS and Padding. If Automatic Pad Stripping is enabled, this value is the length of the received packet
without PCS or Pad bytes. The upper six bits are contained in SU.RFSB1.
Register Name:
Register Description:
Register Address:
Bit #
Name
Default
7
RF
0
SU.RFSB1
Receive Frame Status Byte 1
155h
6
WT
0
5
FL13
0
4
FL12
0
3
FL11
0
2
FL10
0
1
FL9
0
0
FL8
0
Bit 7: Runt Frame (RF). This bit is set to 1 if the received frame was altered by a collision or terminated within the
collision window.
Bit 6: Watchdog Timeout (WT). This bit is set to 1 if a packet receive time exceeds 2048 byte times. After 2048
byte times the receiver is disabled and the received frame will fail CRC check.
Bits 5 to 0: Frame Length (FL[13:8]). These six bits are the upper bits of the length (in bytes) of the received
frame, with FCS and Padding. If Automatic Pad Stripping is enabled, this value is the length of the received packet
without PCS or Pad bytes.
Register Name:
Register Description:
Register Address:
Bit #
Name
Default
7
—
0
SU.RFSB2
Receive Frame Status Byte 2
156h
6
—
0
5
CRCE
0
4
DB
0
3
MIIE
0
2
FT
0
1
CS
0
0
FTL
0
Bit 5: CRC Error (CRCE). This bit is set to 1 if the received frame does not contain a valid CRC value.
Bit 4: Dribbling Bit (DB). This bit is set to 1 if the received frame contains a non-integer multiple of 8 bits. It does
not indicate that the frame is invalid. This bit is not valid for runt or collided frames.
Bit 3: MII Error (MIIE). This bit is set to 1 if an error was found on the MII bus.
Bit 2: Frame Type (FT). This bit is set to 1 if the received frame exceeds 1536 bytes. It is equal to zero if the
received frame is an 802.3 frame. This bit is not valid for runt frames.
Bit 1: Collision Seen (CS). This bit is set to 1 if a late collision occurred on the received packet. A late collision is
one that occurs after the 64-byte collision window.
Bit 0: Frame Too Long (FTL). This bit is set to 1 if a frame exceeds the 1518 byte maximum standard Ethernet
frame. This bit is only an indication, and causes no frame truncation.
173 of 333
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
Register Name:
Register Description:
Register Address:
Bit #
Name
Default
7
MF
0
SU.RFSB3
Receive Frame Status Byte 3
157h
6
—
0
5
—
0
4
BF
0
3
MCF
0
2
UF
0
1
CF
0
0
LE
0
Bit 7: Missed Frame (MF). This bit is set to 1 if the packet is not successfully received from the MAC by the
packet Arbiter.
Bit 4: Broadcast Frame (BF). This bit is set to 1 if the current frame is a broadcast frame.
Bit 3: Multicast Frame (MCF). This bit is set to 1 if the current frame is a multicast frame.
Bit 2: Unsupported Control Frame (UF). This bit is set to 1 if the frame received is a control frame with an
opcode that is not supported. If the Control Frame bit is set, and the Unsupported Control Frame bit is clear, then a
pause frame has been received and the transmitter is paused.
Bit 1: Control Frame (CF). This bit is set to 1 when the current frame is a control frame. This bit is only valid in fullduplex mode.
Bit 0: Length Error (LE). This bit is set to 1 when the frames length field and the actual byte count are unequal.
This bit is only valid for 802.3 frames.
174 of 333
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
Register Name:
Register Description:
Register Address:
Bit #
Name
Default
7
RMPS7
1
SU.RMFSRL
Receiver Maximum Frame Low Register
158h
6
RMPS6
1
5
RMPS5
1
4
RMPS4
0
3
RMPS3
0
2
RMPS2
0
1
RMPS1
1
0
RMPS0
0
Bits 7 to 0: Receiver Maximum Frame (RMPS[7:0]). Eight bits of a 16-bit value. Register description below.
Register Name:
Register Description:
Register Address:
Bit #
Name
Default
7
RMPS15
0
SU.RMFSRH
Receiver Maximum Frame High Register
159h
6
RMPS14
0
5
RMPS13
0
4
RMPS12
0
3
RMPS11
0
2
RMPS10
1
1
RMPS9
1
0
RMPS8
1
Bits 7 to 0: Receiver Maximum Frame (RMPS[15:8]). This value is the receiver’s maximum frame size (in bytes),
up to a maximum of 2016 bytes. Any frame received greater than this value is rejected. The frame size includes
destination address, source address, type/length, data and crc-32. The frame size is not the same as the frame
length encoded within the IEEE 802.3 frame. Any values programmed that are greater than 2016 will have
unpredictable behavior and should be avoided.
Register Name:
Register Description:
Register Address:
Bit #
Name
Default
7
RQLT7
0
SU.RQLT
Receive Queue Low Threshold (Watermark)
15Ah
6
RQLT6
0
5
RQLT5
1
4
RQLT4
1
3
RQLT3
0
2
RQLT2
1
1
RQLT1
1
0
RQLT0
1
Bits 7 to 0: Receive Queue Low Threshold (RQLT[7:0]). The receive queue low threshold for the connection, in
increments of 32 packets of 2048 bytes each. The value of this register is multiplied by 32 x 2048 bytes to
determine the byte location of the threshold. Note that the receive queue is for data that was received from the
Ethernet Interface to be sent to the Serial Interface.
Register Name:
Register Description:
Register Address:
Bit #
Name
Default
7
RQHT7
0
SU.RQHT
Receive Queue High Threshold (Watermark)
15Bh
6
RQHT6
0
5
RQHT5
1
4
RQHT4
1
3
RQHT3
1
2
RQHT2
0
1
RQHT1
1
0
RQHT0
0
Bits 7 to 0: Receive Queue High Threshold (RQTH[7:0]). The receive queue high threshold for the connection,
in increments of 32 packets of 2048 bytes each. The value of this register is multiplied by 32 x 2048 bytes to
determine the byte location of the threshold. Note that the receive queue is for data that was received from the
Ethernet Interface to be sent to the Serial Interface.
175 of 333
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
Register Name:
Register Description:
Register Address:
Bit #
Name
Default
7
—
0
SU.QRIE
Receive Queue Cross Threshold enable
15Ch
6
—
0
5
—
0
4
—
0
3
RFOVFIE
0
2
RQVFIE
0
1
RQLTIE
0
0
RQHTIE
0
Bit 3: Receive FIFO Overflow Interrupt Enable (RFOVFIE). If this bit is set, the interrupt is enabled for
RFOVFLS.
Bit 2: Receive Queue Overflow Interrupt Enable (RQVFIE). If this bit is set, the interrupt is enabled for
RQOVFLS.
Bit 1: Receive Queue Crosses Low Threshold Interrupt Enable (RQLTIE). If this bit is set, the watermark
interrupt is enabled for RQLTS.
Bit 0: Receive Queue Crosses High Threshold Interrupt Enable (RQHTIE). If this bit is set, the watermark
interrupt is enabled for RQHTS.
Register Name:
Register Description:
Register Address:
Bit #
Name
Default
7
—
—
SU.QCRLS
Queue Cross Threshold Latched Status
15Dh
6
—
—
5
—
—
4
—
—
3
RFOVFLS
—
2
RQOVFLS
—
1
RQHTLS
—
0
RQLTLS
—
Bit 3: Receive FIFO Overflow latched Status (RFOVFLS). This bit is set if the receive FIFO overflows for the
data to be transmitted from the MAC to the SDRAM.
Bit 2: Receive Queue Overflow Latched Status (RQOVFLS). This bit is set if the receive queue has overflowed.
This register is cleared after a read.
Bit 1: Receive Queue for Connection Crossed High Threshold Latched Status (RQHTLS). This bit is set if the
receive queue crosses the high Watermark. This register is cleared after a read.
Bit 0: Receive Queue for Connection Crossed Low Threshold latched status (RQLTLS). This bit is set if the
receive queue crosses the low Watermark. This register is cleared after a read.
Note the bit order differences in the high/low threshold indications in SU.QCRLS and the interrupt enables in
SU.QRIE.
176 of 333
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
Register Name:
Register Description:
Register Address:
Bit #
Name
Default
7
—
0
SU.RFRC
Receive Frame Rejection Control
15Eh
6
UCFR
0
5
CFRR
0
4
LERR
0
3
CRCERR
0
2
DBR
0
1
MIIER
0
0
BFR
0
Bit 6: Uncontrolled Control Frame Reject (UCFR). When set to 1, Control Frames other than Pause Frames are
allowed. When this bit is equal to zero, non-pause control frames are rejected.
Bit 5: Control Frame Reject (CFRR). When set to 1, control frames are allowed. When this bit is equal to zero, all
control frames are rejected.
Bit 4: Length Error Reject (LERR). When set to 1, frames with an unmatched frame length field and actual
number of bytes received are allowed. When equal to zero, only frames with matching length fields and actual
bytes received will be allowed.
Bit 3: CRC Error Reject (CRCERR). When set to 1, frames received with a CRC error or MII error are allowed.
When equal to zero, frames with CRC or MII errors are rejected.
Bit 2: Dribbling Bit Reject (DBR). When set to 1, frames with lengths of non-integer multiples of 8 bits are
allowed. When equal to zero, frames with dribbling bits are rejected. The dribbling bit setting is only valid only if
there is not a collision or runt frame.
Bit 1: MII Error Reject (MIIER). When set to 1, frames are allowed with MII Receive Errors. When equal to zero,
frames with MII errors are rejected.
Bit 0: Broadcast Frame Reject (BFR). When set to 1, broadcast frames are allowed. When equal to zero,
broadcast frames are rejected.
177 of 333
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
12.6.2 MAC Registers
The control Registers related to the control of the individual MACs are shown in the following table. The device
keeps statistics for the packet traffic sent and received. The register address map is shown in the following table.
Note that the addresses listed are the indirect addresses that must be provided to SU.MACRADH/SU.MACRADL
or SU.MACAWH/SU.MACAWL.
Register Name:
Register Description:
Register Address:
SU.MACCR
MAC Control Register
0000h (indirect)
0000h:
Bit #
Name
Default
31
Reserved
0
30
Reserved
0
29
Reserved
0
28
HDB
0
27
PS
0
26
Reserved
0
25
Reserved
0
24
Reserved
0
0001h:
Bit #
Name
Default
23
DRO
0
22
Reserved
0
21
OML0
0
20
F
0
19
Reserved
0
18
Reserved
0
17
Reserved
0
16
Reserved
0
0002h:
Bit #
Name
Default
15
Reserved
0
14
Reserved
0
13
Reserved
0
12
LCC
0
11
Reserved
0
10
DRTY
0
09
Reserved
0
08
ASTP
0
0003h:
Bit #
Name
Default
07
BOLMT1
0
06
BOLMT0
0
05
DC
0
04
Reserved
0
03
TE
0
02
RE
0
01
Reserved
0
00
Reserved
0
Bit 28: Heartbeat Disable (HDB). When set to 1, the heartbeat (SQE) function is disabled. This bit should be set
to 1 when operating in MII mode.
Bit 27: Port Select (PS). This bit should be equal to 0 for proper operation.
Bit 23: Disable Receive Own (DRO). When set to 1, the MAC disables the reception of frames while TX_EN is
asserted. When this bit equals zero, transmitted frames are also received by the MAC. This bit should be cleared
when operating in full-duplex mode.
Bit 21: Loopback Operating Mode (OMLO). When set to 1, data is looped from the transmit side, back to the
receive side, without being transmitted to the PHY.
Bit 20: Full-Duplex Mode Select (F). When set to 1, the MAC transmits and receives data simultaneously. When
in full-duplex mode, the heartbeat check is disabled and the heartbeat fail status should be ignored.
Bit 12: Late Collision Control (LCC). When set to 1, enables retransmission of a collided packet even after the
collision period. When this bit is clear, retransmission of late collisions is disabled.
Bit 10: Disable Retry (DRTY). When set to 1, the MAC makes only a single attempt to transmit each frame. If a
collision occurs, the MAC ignores the current frame and proceeds to the next frame. When this bit equals 0, the
MAC will retry collided packets 16 times before signaling a retry error.
Bit 8: Automatic Pad Stripping (ASTP). When set to 1, all incoming frames with less than 46 byte length are
automatically stripped of the pad characters and FCS.
Bits 7 and 6: Back-Off Limit (BOLMT[1:0]). These two bits allow the user to set the back-off limit used for the
maximum retransmission delay for collided packets. Default operation limits the maximum delay for retransmission
178 of 333
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
to a countdown of 10 bits from a random number generator. The user can reduce the maximum number of counter
bits as described in the table below. See IEEE 802.3 for details of the back-off algorithm.
Bit 7
Bit 6
0
0
1
1
0
1
0
1
Random Number Generator Bits
Used
10
8
4
1
Bit 5: Deferral Check (DC). When set to 1, the MAC will abort packet transmission if it has deferred for more than
24,288 bit times.The deferral counter starts when the transmitter is ready to transmit a packet, but is prevented
from transmission because CRS is active. If the MAC begins transmission but a collision occurs after the beginning
of transmission, the deferral counter is reset again. If this bit is equal to zero, then the MAC will defer indefinitely.
Bit 3: Transmitter Enable (TE). When set to 1, packet transmission is enabled. When equal to zero, transmission
is disabled.
Bit 2: Receiver Enable (RE). When set to 1, packet reception is enabled. When equal to zero, packets are not
received.
179 of 333
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
Register Name:
Register Description:
Register Address:
SU.MACAH
MAC Address High Register
0004h (indirect)
0004h:
Bit #
Name
Default
31
Reserved
1
30
Reserved
1
29
Reserved
1
28
Reserved
1
27
Reserved
1
0005h:
Bit #
Name
Default
23
Reserved
1
22
Reserved
1
21
Reserved
1
20
Reserved
1
19
Reserved
1
0006h:
Bit #
Name
Default
15
PADR47
1
14
PADR46
1
13
PADR45
1
12
PADR44
1
0007h:
Bit #
Name
Default
07
PADR39
1
06
PADR38
1
05
PADR37
1
04
PADR36
1
26
Reserved
1
25
Reserved
1
24
Reserved
1
18
Reserved
1
17
Reserved
1
16
Reserved
1
11
PADR43
1
10
PADR42
1
09
PADR41
1
08
PADR40
1
03
PADR35
1
02
PADR34
1
01
PADR33
1
00
PADR32
1
Bits 31 to 00: PADR[32:47:32]. These 32 bits should be initialized with the upper 4 bytes of the Physical Address
for this MAC device.
Register Name:
Register Description:
Register Address:
SU.MACAL
MAC Address Low Register
0008h (indirect)
0008h:
Bit #
Name
Default
31
PADR31
1
30
PADR30
1
29
PADR29
1
28
PADR28
1
27
PADR27
1
26
PADR26
1
25
PADR25
1
24
PADR24
1
0009h:
Bit #
Name
Default
23
PADR23
1
22
PADR22
1
21
PADR21
1
20
PADR20
1
19
PADR19
1
18
PADR18
1
17
PADR17
1
16
PADR16
1
000Ah:
Bit #
Name
Default
15
PADR15
1
14
PADR14
1
13
PADR13
1
12
PADR12
1
11
PADR11
1
10
PADR10
1
09
PADR09
1
08
PADR08
1
000Bh:
Bit #
Name
Default
07
PADR07
1
06
PADR06
1
05
PADR05
1
04
PADR04
1
03
PADR03
1
02
PADR02
1
01
PADR01
1
00
PADR00
1
Bits 31 to 00: PADR[31:00]. These 32 bits should be initialized with the lower 4 bytes of the Physical Address for
this MAC device.
180 of 333
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
Register Name:
Register Description:
Register Address:
SU.MACMIIA
MAC MII Management (MDIO) Address Register
0014h (indirect)
0014h:
Bit #
Name
Default
31
Reserved
0
30
Reserved
0
29
Reserved
0
28
Reserved
0
27
Reserved
0
26
Reserved
0
25
Reserved
0
24
Reserved
0
0015h:
Bit #
Name
Default
23
Reserved
0
22
Reserved
0
21
Reserved
0
20
Reserved
0
19
Reserved
0
18
Reserved
0
17
Reserved
0
16
Reserved
0
0016h:
Bit #
Name
Default
15
PHYA4
0
14
PHYA3
1
13
PHYA2
0
12
PHYA1
1
11
PHYA0
1
10
MIIA4
0
09
MIIA3
1
08
MIIA2
0
0017h:
Bit #
Name
Default
07
MIIA1
1
06
MIIA0
1
05
Reserved
0
04
Reserved
0
03
Reserved
0
02
Reserved
0
01
MIIW
0
00
MIIB
0
Bits 15 to 11: PHY Address (PHYA[4:0]). These 5 bits select one of the 32 available PHY address locations to
access through the PHY management (MDIO) bus.
Bits 10 to 6: MII Address (MIIA[4:0]). These 5 bits are the address location within the PHY that is being
accessed.
Bit 1: MII Write (MIIW). Write this bit to 1 in order to execute a write instruction over the MDIO interface. Write the
bit to zero to execute a read instruction.
Bit 0: MII Busy (MIIB). This bit is set to 1 by the device during execution of a MII management instruction through
the MDIO interface, and is set to zero when the device has completed the instruction. The user should read this bit
and ensure that it is equal to zero prior to beginning a MDIO instruction.
181 of 333
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
Register Name:
Register Description:
Register Address:
SU.MACMIID
MAC MII (MDIO) Data Register
0018h (indirect)
0018h:
Bit #
Name
Default
31
Reserved
0
30
Reserved
0
29
Reserved
0
28
Reserved
0
27
Reserved
0
26
Reserved
0
25
Reserved
0
24
Reserved
0
0019h:
Bit #
Name
Default
23
Reserved
0
22
Reserved
0
21
Reserved
0
20
Reserved
0
19
Reserved
0
18
Reserved
0
17
Reserved
0
16
Reserved
0
001Ah:
Bit #
Name
Default
15
MIID15
0
14
MIID14
0
13
MIID13
0
12
MIID12
0
11
MIID11
0
10
MIID10
0
09
MIID09
0
08
MIID08
0
001Bh:
Bit #
Name
Default
07
MIID07
0
06
MIID06
0
05
MIID05
0
04
MIID04
0
03
MIID03
0
02
MIID02
0
01
MIID01
0
00
MIID00
0
Bits 15 to 0: MII (MDIO) Data (MIID[15:00]). These two bytes contain the data to be written to or the data read
from the MII management interface (MDIO).
182 of 333
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
Register Name:
Register Description:
Register Address:
SU.MACFCR
MAC Flow Control Register
001Ch (indirect)
001Ch:
Bit #
Name
Default
31
PT15
0
30
PT14
0
29
PT13
0
28
PT12
0
27
PT11
0
26
PT10
0
25
PT09
0
24
PT08
0
001Dh:
Bit #
Name
Default
23
PT07
0
22
PT06
1
21
PT05
0
20
PT04
1
19
PT03
0
18
PT02
0
17
PT01
0
16
PT00
0
001Eh:
Bit #
Name
Default
15
Reserved
0
14
Reserved
0
13
Reserved
0
12
Reserved
0
11
Reserved
0
10
Reserved
0
09
Reserved
0
08
Reserved
0
001Fh:
Bit #
Name
07
Reserved
05
Reserved
04
Reserved
03
Reserved
02
Reserved
01
FCE
00
FCB
Default
0
06
Reserve
d
0
0
0
0
0
1
0
Bits 31 to 16: Pause Time (PT[15:00]). These bits are used for the Pause Time Field in transmitted Pause
Frames. This value is the number of time slots the remote node should wait prior to transmission.
Bit 1: Flow Control Enable (FCE). When set to 1, the MAC automatically detects pause frames and will disable
the transmitter for the requested pause time.
Bit 0: Flow Control Busy (FCB). The host can set this bit to 1 in order to initiate transmission of a pause frame.
During transmission of a pause frame, this bit remains set. The device will clear this bit when transmission of the
pause frame has been completed. The user should read this bit and ensure that this bit is equal to zero prior to
initiating a pause frame.
183 of 333
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
Register Name:
Register Description:
Register Address:
SU.MMCCTRL
MAC MMC Control Register
0100h (indirect)
0100h:
Bit #
Name
Default
31
Reserved
0
30
Reserved
0
29
Reserved
0
28
Reserved
0
27
Reserved
0
26
Reserved
0
25
Reserved
0
24
Reserved
0
0101h:
Bit #
Name
Default
23
Reserved
0
22
Reserved
0
21
Reserved
0
20
Reserved
0
19
Reserved
0
18
Reserved
0
17
Reserved
0
16
Reserved
0
0102h:
Bit #
Name
Default
15
Reserved
0
14
Reserved
0
13
MXFRM10
1
12
MXFRM9
0
11
MXFRM8
1
10
MXFRM7
1
09
MXFRM6
1
08
MXFRM5
1
0103h:
Bit #
Name
Default
07
MXFRM4
0
06
MXFRM3
1
05
MXFRM2
1
04
MXFRM1
1
03
MXFRM0
0
02
Reserved
0
01
Reserved
1
00
Reserved
0
Bits 13 to 3: Maximum Frame Size (MXFRM[10:0]). These bits indicate the maximum packet size value. All
transmitted frames larger than this value are counted as long frames.
Bit 1: Reserved. Note that this bit must be written to a “1” for proper operation.
184 of 333
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
Register Name:
Register Description:
Register Address:
Reserved
MAC Reserved Control Register
010Ch (indirect)
010Ch:
Bit #
Name
Default
31
Reserved
0
30
Reserved
0
29
Reserved
0
28
Reserved
0
27
Reserved
0
26
Reserved
0
25
Reserved
0
24
Reserved
0
010Dh:
Bit #
Name
Default
23
Reserved
0
22
Reserved
0
21
Reserved
0
20
Reserved
0
19
Reserved
0
18
Reserved
0
17
Reserved
0
16
Reserved
0
010Eh:
Bit #
Name
Default
15
Reserved
0
14
Reserved
0
13
Reserved
0
12
Reserved
0
11
Reserved
0
10
Reserved
0
09
Reserved
0
08
Reserved
0
010Fh:
Bit #
Name
07
Reserved
05
Reserved
04
Reserved
03
Reserved
02
Reserved
01
Reserved
00
Reserved
Default
0
06
Reserve
d
0
0
0
0
0
0
0
Note: Addresses 10Ch through 10Fh must each be initialized with all 1s (FFh) for proper software-mode
operation.
185 of 333
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
Register Name:
Register Description:
Register Address:
Reserved
MAC Reserved Control Register
0110h (indirect)
0110h:
Bit #
Name
Default
31
Reserved
0
30
Reserved
0
29
Reserved
0
28
Reserved
0
27
Reserved
0
26
Reserved
0
25
Reserved
0
24
Reserved
0
0111h:
Bit #
Name
Default
23
Reserved
0
22
Reserved
0
21
Reserved
0
20
Reserved
0
19
Reserved
0
18
Reserved
0
17
Reserved
0
16
Reserved
0
0112h:
Bit #
Name
Default
15
Reserved
0
14
Reserved
0
13
Reserved
0
12
Reserved
0
11
Reserved
0
10
Reserved
0
09
Reserved
0
08
Reserved
0
0113h:
Bit #
Name
07
Reserved
05
Reserved
04
Reserved
03
Reserved
02
Reserved
01
Reserved
00
Reserved
Default
0
06
Reserve
d
0
0
0
0
0
0
0
Note: Addresses 110h through 113h must each be initialized with all 1s (FFh) for proper software-mode
operation.
186 of 333
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
Register Name:
Register Description:
Register Address:
0200h:
Bit #
Name
Default
0201h:
Bit #
Name
Default
0202h:
Bit #
Name
Default
0203h:
Bit #
Name
Default
SU.RxFrmCtr
MAC All Frames Received Counter
0200h (indirect)
31
30
29
28
27
26
25
24
RXFRMC31
RXFRMC30
RXFRMC29
RXFRMC28
RXFRMC27
RXFRMC26
RXFRMC25
RXFRMC24
0
0
0
0
0
0
0
0
23
22
21
20
19
18
17
16
RXFRMC23
RXFRMC22
RXFRMC21
RXFRMC20
RXFRMC19
RXFRMC18
RXFRMC17
RXFRMC16
0
0
0
0
0
0
0
0
15
14
13
12
11
10
09
08
RXFRMC15
RXFRMC14
RXFRMC13
RXFRMC12
RXFRMC11
RXFRMC10
RXFRMC9
RXFRMC8
0
0
0
0
0
0
0
0
07
06
05
04
03
02
01
00
RXFRMC7
RXFRMC6
RXFRMC5
RXFRMC4
RXFRMC3
RXFRMC2
RXFRMC1
RXFRMC0
0
0
0
0
0
0
0
0
Bits 31 to 0: All Frames Received Counter (RXFRMC[31:0]). 32-bit value indicating the number of frames
received. Each time a frame is received, this counter is incremented by 1. This counter resets only upon device
reset, does not saturate, and rolls over to zero upon reaching the maximum value. The user should ensure that the
measurement period is less than the minimum length of time required for the counter to increment 2^32-1 times at
the maximum frame rate.The user should store the value from the beginning of the measurement period for later
calculations, and take into account the possibility of a rollover to occur.
187 of 333
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
Register Name:
Register Description:
Register Address:
0204h:
Bit #
Name
Default
0205h:
Bit #
Name
Default
0206h:
Bit #
Name
Default
0207h:
Bit #
Name
Default
31
SU.RxFrmOkCtr
MAC Frames Received OK Counter
0204h (indirect)
30
29
28
27
26
25
24
RXFRMOK3 RXFRMOK3 RXFRMOK2 RXFRMOK2 RXFRMOK2 RXFRMOK2 RXFRMOK2 RXFRMOK2
1
0
9
8
7
6
5
4
0
0
0
0
0
0
0
0
23
22
21
20
19
18
17
16
RXFRMOK2 RXFRMOK2 RXFRMOK2 RXFRMOK2 RXFRMOK1 RXFRMOK1 RXFRMOK1 RXFRMOK1
3
2
1
0
9
8
7
6
0
0
0
0
0
0
0
0
15
14
13
12
11
10
09
08
RXFRMOK1 RXFRMOK1 RXFRMOK1 RXFRMOK1 RXFRMOK1 RXFRMOK1
RXFRMOK9 RXFRMOK8
5
4
3
2
1
0
0
0
0
0
0
0
0
0
07
06
05
04
03
02
01
00
RXFRMOK7 RXFRMOK6 RXFRMOK5 RXFRMOK4 RXFRMOK3 RXFRMOK2 RXFRMOK1 RXFRMOK0
0
0
0
0
0
0
0
0
Bits 31 to 0: Frames Received OK Counter (RXFRMOK[31:0]). 32-bit value indicating the number of frames
received and determined to be valid. Each time a valid frame is received, this counter is incremented by 1. This
counter resets only upon device reset, does not saturate, and rolls over to zero upon reaching the maximum value.
The user should ensure that the measurement period is less than the minimum length of time required for the
counter to increment 2^32-1 times at the maximum frame rate. The user should store the value from the beginning
of the measurement period for later calculations, and take into account the possibility of a rollover to occur.
188 of 333
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
Register Name:
Register Description:
Register Address:
0300h:
Bit #
Name
Default
0301h:
Bit #
Name
Default
0302h:
Bit #
Name
Default
0303h:
Bit #
Name
Default
SU.TxFrmCtr
MAC All Frames Transmitted Counter
0300h (indirect)
31
30
29
28
27
26
25
24
TXFRMC31
TXFRMC30
TXFRMC29
TXFRMC28
TXFRMC27
TXFRMC26
TXFRMC25
TXFRMC24
0
0
0
0
0
0
0
0
23
22
21
20
19
18
17
16
TXFRMC23
TXFRMC22
TXFRMC21
TXFRMC20
TXFRMC19
TXFRMC18
TXFRMC17
TXFRMC16
0
0
0
0
0
0
0
0
15
14
13
12
11
10
09
08
TXFRMC15
TXFRMC14
TXFRMC13
TXFRMC12
TXFRMC11
TXFRMC10
TXFRMC9
TXFRMC8
0
0
0
0
0
0
0
0
07
06
05
04
03
02
01
00
TXFRMC7
TXFRMC6
TXFRMC5
TXFRMC4
TXFRMC3
TXFRMC2
TXFRMC1
TXFRMC0
0
0
0
0
0
0
0
0
Bits 31 to 0: All Frames Transmitted Counter (TXFRMC[31:0]). 32-bit value indicating the number of frames
transmitted. Each time a frame is transmitted, this counter is incremented by 1. This counter resets only upon
device reset, does not saturate, and rolls over to zero upon reaching the maximum value. The user should ensure
that the measurement period is less than the minimum length of time required for the counter to increment 2^32-1
times at the maximum frame rate. The user should store the value from the beginning of the measurement period
for later calculations, and take into account the possibility of a rollover to occur.
189 of 333
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
Register Name:
Register Description:
Register Address:
0308h:
Bit #
Name
Default
0309h:
Bit #
Name
Default
030Ah:
Bit #
Name
Default
030Bh:
Bit #
Name
Default
31
SU.TxBytesCtr
MAC All Bytes Transmitted Counter
0308h (indirect)
30
29
28
27
26
25
24
TXBYTEC31 TXBYTEC30 TXBYTEC29 TXBYTEC28 TXBYTEC27 TXBYTEC26 TXBYTEC25 TXBYTEC24
0
0
0
0
0
0
0
0
23
22
21
20
19
18
17
16
TXBYTEC23 TXBYTEC22 TXBYTEC21 TXBYTEC20 TXBYTEC19 TXBYTEC18 TXBYTEC17 TXBYTEC16
0
0
0
0
0
0
0
15
14
13
12
11
10
09
TXBYTEC15 TXBYTEC14 TXBYTEC13 TXBYTEC12 TXBYTEC11 TXBYTEC10 TXBYTEC9
0
0
0
0
0
0
0
0
08
TXBYTEC8
0
07
06
05
04
03
02
01
00
TXBYTEC7
TXBYTEC6
TXBYTEC5
TXBYTEC4
TXBYTEC3
TXBYTEC2
TXBYTEC1
TXBYTEC0
0
0
0
0
0
0
0
0
Bits 31 to 0: All Bytes Transmitted Counter (TXBYTEC[31:0]). 32-bit value indicating the number of bytes
transmitted. Each time a byte is transmitted, this counter is incremented by 1. This counter resets only upon device
reset, does not saturate, and rolls over to zero upon reaching the maximum value. The user should ensure that the
measurement period is less than the minimum length of time required for the counter to increment 2^32-1 times at
the maximum data rate. The user should store the value from the beginning of the measurement period for later
calculations, and take into account the possibility of a rollover to occur.
190 of 333
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
Register Name:
Register Description:
Register Address:
030Ch:
Bit #
Name
Default
030Dh:
Bit #
Name
Default
030Eh:
Bit #
Name
Default
030Fh:
Bit #
Name
Default
31
SU.TxBytesOkCtr
MAC Bytes Transmitted OK Counter
030Ch (indirect)
30
29
28
27
26
25
24
TXBYTEOK31 TXBYTEOK30 TXBYTEOK29 TXBYTEOK28 TXBYTEOK27 TXBYTEOK26 TXBYTEOK25 TXBYTEOK24
0
0
0
0
0
0
0
0
23
22
21
20
19
18
17
16
TXBYTEOK23 TXBYTEOK22 TXBYTEOK21 TXBYTEOK20 TXBYTEOK19 TXBYTEOK18 TXBYTEOK17 TXBYTEOK16
0
0
0
0
0
0
15
14
13
12
11
10
TXBYTEOK15 TXBYTEOK14 TXBYTEOK13 TXBYTEOK12 TXBYTEOK11 TXBYTEOK10
0
0
0
0
0
0
0
0
09
08
TXBYTEOK9
TXBYTEOK8
0
0
07
06
05
04
03
02
01
00
TXBYTEOK7
TXBYTEOK6
TXBYTEOK5
TXBYTEOK4
TXBYTEOK3
TXBYTEOK2
TXBYTEOK1
TXBYTEOK0
0
0
0
0
0
0
0
0
Bits 31 to 0: Bytes Transmitted OK Counter (TXBYTEOK[31:0]). 32-bit value indicating the number of bytes
transmitted and determined to be valid. Each time a valid byte is transmitted, this counter is incremented by 1. This
counter resets only upon device reset, does not saturate, and rolls over to zero upon reaching the maximum value.
The user should ensure that the measurement period is less than the minimum length of time required for the
counter to increment 2^32-1 times at the maximum frame rate. The user should store the value from the beginning
of the measurement period for later calculations, and take into account the possibility of a rollover to occur.
191 of 333
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
Register Name:
Register Description:
Register Address:
0334h:
Bit #
Name
Default
0335h:
Bit #
Name
Default
0336h:
Bit #
Name
Default
0337h:
Bit #
Name
Default
SU.TXFRMUNDR
MAC Transmit Frame Under Run Counter
0334h (indirect)
31
30
29
28
27
26
25
24
TXFRMU31
TXFRMU30
TXFRMU29
TXFRMU28
TXFRMU27
TXFRMU26
TXFRMU25
TXFRMU24
0
0
0
0
0
0
0
0
23
22
21
20
19
18
17
16
TXFRMU23
TXFRMU22
TXFRMU21
TXFRMU20
TXFRMU19
TXFRMU18
TXFRMU17
TXFRMU16
0
0
0
0
0
0
0
0
15
14
13
12
11
10
09
08
TXFRMU15
TXFRMU14
TXFRMU13
TXFRMU12
TXFRMU11
TXFRMU10
TXFRMU9
TXFRMU8
0
0
0
0
0
0
0
0
07
06
05
04
03
02
01
00
TXFRMU7
TXFRMU6
TXFRMU5
TXFRMU4
TXFRMU3
TXFRMU2
TXFRMU1
TXFRMU0
0
0
0
0
0
0
0
0
Bits 31 to 0: Frames Aborted Due to FIFO Underrun Counter (TXFRMU[31:0]). 32-bit value indicating the
number of frames aborted due to FIFO under run. Each time a frame is aborted due to FIFO under run, this
counter is incremented by 1. This counter resets only upon device reset, does not saturate, and rolls over to zero
upon reaching the maximum value. The user should ensure that the measurement period is less than the minimum
length of time required for the counter to increment 2^32-1 times at the maximum frame rate. The user should store
the value from the beginning of the measurement period for later calculations, and take into account the possibility
of a rollover to occur.
192 of 333
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
Register Name:
Register Description:
Register Address:
0338h:
Bit #
Name
Default
0339h:
Bit #
Name
Default
033Ah:
Bit #
Name
Default
033Bh:
Bit #
Name
Default
31
SU.TxBdFrmCtr
MAC All Frames Aborted Counter
0338h (indirect)
30
29
28
27
26
25
24
TXFRMBD31 TXFRMBD30 TXFRMBD29 TXFRMBD28 TXFRMBD27 TXFRMBD26 TXFRMBD25 TXFRMBD24
0
0
0
0
0
0
0
0
23
22
21
20
19
18
17
16
TXFRMBD23 TXFRMBD22 TXFRMBD21 TXFRMBD20 TXFRMBD19 TXFRMBD18 TXFRMBD17 TXFRMBD16
0
0
0
0
0
0
0
15
14
13
12
11
10
09
TXFRMBD15 TXFRMBD14 TXFRMBD13 TXFRMBD12 TXFRMBD11 TXFRMBD10 TXFRMBD9
0
08
TXFRMBD8
0
0
0
0
0
0
0
0
07
06
05
04
03
02
01
00
TXFRMBD7 TXFRMBD6 TXFRMBD5 TXFRMBD4 TXFRMBD3 TXFRMBD2 TXFRMBD1 TXFRMBD0
0
0
0
0
0
0
0
0
Bits 31 to 0: All Frames Aborted Counter (TXFRMBD[31:0]). 32-bit value indicating the number of frames
aborted due to any reason. Each time a frame is aborted, this counter is incremented by 1. This counter resets only
upon device reset, does not saturate, and rolls over to zero upon reaching the maximum value. The user should
ensure that the measurement period is less than the minimum length of time required for the counter to increment
2^32-1 times at the maximum frame rate. The user should store the value from the beginning of the measurement
period for later calculations, and take into account the possibility of a rollover to occur.
193 of 333
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
12.7 Transceiver Registers
Register Name:
Register Description:
Register Address:
Bit #
Name
Default
7
—
0
TR.MSTRREG
Master Mode Register
00h
6
—
0
5
—
0
4
—
0
3
TEST1
0
2
TEST0
0
1
T1/E1
0
0
SFTRST
0
Bits 3 and 2: Test Mode Bits (TEST1 and TEST0). Test modes are used to force the output pins of the
transceiver into known states. This can facilitate the checkout of assemblies during the manufacturing process and
also be used to isolate devices from shared buses.
TEST1
TEST0
Effect On Output Pins
0
0
0
1
1
1
0
1
Operate normally
Force all output pins into tri-state (including all I/O pins and parallel port
pins)
Force all output pins low (including all I/O pins except parallel port pins)
Force all output pins high (including all I/O pins except parallel port pins)
Bit 1: Transceiver Operating Mode (T1/E1). Used to select the operating mode of the framer/formatter (digital)
portion of the transceiver. The operating mode of the LIU must also be programmed.
0 = T1 operation
1 = E1 operation
Bit 0: Software-Issued Reset (SFTRST). A 0-to-1 transition causes the register space in the T1/E1/J1 transceiver
to be cleared. A reset clears all configuration and status registers. The bit automatically clears itself when the reset
has completed.
194 of 333
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
Register Name:
Register Description:
Register Address:
TR.IOCR1
I/O Configuration Register 1
01h
Bit #
Name
Default
6
RSMS2
0
7
RSMS
0
5
RSMS1
0
4
RSIO
0
3
TSDW
0
2
TSM
0
1
TSIO
0
0
ODF
0
Bit 7: RSYNC Multiframe Skip Control (RSMS). Useful in framing format conversions from D4 to ESF. This
function is not available when the receive-side elastic store is enabled. RSYNC must be set to output multiframe
pulses (TR.IOCR1.5 = 1 and TR.IOCR1.4 = 0).
0 = RSYNC outputs a pulse at every multiframe
1 = RSYNC outputs a pulse at every other multiframe
Bit 6: RSYNC Mode Select 2 (RSMS2)
T1 Mode: RSYNC pin must be programmed in the output frame mode (TR.IOCR1.5 = 0,TR.IOCR1.4 = 0).
0 = do not pulse double-wide in signaling frames
1 = do pulse double-wide in signaling frames
E1 Mode: RSYNC pin must be programmed in the output multiframe mode (TR.IOCR1.5 = 1, TR.IOCR1.4 =
0).
0 = RSYNC outputs CAS multiframe boundaries
1 = RSYNC outputs CRC4 multiframe boundaries
Bit 5: RSYNC Mode Select 1(RSMS1). Selects frame or multiframe pulse when RSYNC pin is in output mode. In
input mode (elastic store must be enabled), multiframe mode is only useful when receive signaling reinsertion is
enabled. See the timing diagrams in Section 13.
0 = frame mode
1 = multiframe mode
Bit 4: RSYNC I/O Select (RSIO). This bit must be set to 0 when TR.ESCR.0 = 0.
0 = RSYNC is an output
1 = RSYNC is an input (only valid if elastic store enabled)
Bit 3: TSYNC Double-Wide (TSDW). This bit must be set to 0 when TR.IOCR1.2 = 1 or when TR.IOCR1.1 = 0.
0 = do not pulse double-wide in signaling frames
1 = do pulse double-wide in signaling frames
Bit 2: TSYNC Mode Select (TSM). Selects frame or multiframe mode for the TSYNC pin. See the timing diagrams
in Section 13.
0 = frame mode
1 = multiframe mode
Bit 1: TSYNC I/O Select (TSIO)
0 = TSYNC is an input
1 = TSYNC is an output
Bit 0: Output Data Format (ODF)
0 = bipolar data at TPOSO and TNEGO
1 = NRZ data at TPOSO; TNEGO = 0
195 of 333
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
Register Name:
Register Description:
Register Address:
TR.IOCR2
I/O Configuration Register 2
02h
Bit #
Name
Default
6
TCLKINV
0
7
RCLKINV
0
5
RSYNCINV
0
4
TSYNCINV
0
Bit 7: RCLKO Invert (RCLKINV)
0 = no inversion
1 = inverts signal on RCLKO output.
Bit 6: TCLKT Invert (TCLKINV)
0 = no inversion
1 = inverts signal on TCLKT input.
Bit 5: RSYNC Invert (RSYNCINV)
0 = no inversion
1 = invert
Bit 4: TSYNC Invert (TSYNCINV)
0 = no inversion
1 = invert
Bit 3: TSSYNC Invert (TSSYNCINV)
0 = no inversion
1 = invert
Bit 2 : H.100 SYNC Mode (H100EN)
0 = normal operation
1 = SYNC shift
Bit 1: TSYSCLK Mode Select (TSCLKM)
0 = if TSYSCLK is 1.544MHz
1 = if TSYSCLK is 2.048MHz
Bit 0: RSYSCLK Mode Select (RSCLKM)
0 = if RSYSCLK is 1.544MHz
1 = if RSYSCLK is 2.048MHz
196 of 333
3
TSSYNCINV
0
2
H100EN
0
1
TSCLKM
0
0
RSCLKM
0
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
Register Name:
Register Description:
Register Address:
Bit #
Name
Default
TR.T1RCR1
T1 Receive Control Register 1
03h
7
—
0
6
ARC
0
5
OOF1
0
4
OOF2
0
3
SYNCC
0
2
SYNCT
0
1
SYNCE
0
0
RESYNC
0
Bit 6: Auto Resync Criteria (ARC)
0 = resync on OOF or RCL event
1 = resync on OOF only
Bits 5 and 4: Out-of-Frame Select Bits (OOF1 and OOF2)
OOF2
OOF1
0
0
1
1
0
1
0
1
Out-Of-Frame Criteria
2/4 frame bits in error
2/5 frame bits in error
2/6 frame bits in error
2/6 frame bits in error
Bit 3: Sync Criteria (SYNCC)
In D4 Framing Mode:
0 = search for Ft pattern, then search for Fs pattern
1 = cross couple Ft and Fs pattern
In ESF Framing Mode:
0 = search for FPS pattern only
1 = search for FPS and verify with CRC6
Bit 2: Sync Time (SYNCT)
0 = qualify 10 bits
1 = qualify 24 bits
Bit 1: Sync Enable (SYNCE)
0 = auto resync enabled
1 = auto resync disabled
Bit 0: Resynchronize (RESYNC). When toggled from low to high, a resynchronization of the receive-side framer
is initiated. Must be cleared and set again for a subsequent resync.
197 of 333
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
Register Name:
Register Description:
Register Address:
Bit #
Name
Default
7
—
0
TR.T1RCR2
T1 Receive Control Register 2
04h
6
RFM
0
5
RB8ZS
0
4
RSLC96
0
3
RZSE
0
2
—
0
1
RJC
0
0
RD4YM
0
Bit 6: Receive Frame Mode Select (RFM)
0 = D4 framing mode
1 = ESF framing mode
Bit 5: Receive B8ZS Enable (RB8ZS)
0 = B8ZS disabled
1 = B8ZS enabled
Bit 4: Receive SLC-96 Enable (RSLC96). Only set this bit to a 1 in D4/SLC-96 framing applications. See Section
10.19 for details.
0 = SLC-96 disabled
1 = SLC-96 enabled
Bit 3: Receive FDL Zero-Destuffer Enable (RZSE). Set this bit to 0 if using the internal HDLC/BOC controller
instead of the legacy support for the FDL. See Section 10.18 for details.
0 = zero destuffer disabled
1 = zero destuffer enabled
Bit 2: Reserved. Set to zero for proper operation.
Bit 1: Receive Japanese CRC6 Enable (RJC)
0 = use ANSI/AT&T/ITU CRC6 calculation (normal operation)
1 = use Japanese standard JT–G704 CRC6 calculation
Bit 0: Receive-Side D4 Yellow Alarm Select (RD4YM)
0 = 0s in bit 2 of all channels
1 = a 1 in the S-bit position of frame 12 (J1 Yellow Alarm Mode)
198 of 333
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
Register Name:
Register Description:
Register Address:
Bit #
Name
Default
7
TJC
0
TR.T1TCR1
T1 Transmit Control Register 1
05h
6
TFPT
0
5
TCPT
0
4
TSSE
0
3
GB7S
0
2
TFDLS
0
1
TBL
0
0
TYEL
0
Bit 7: Transmit Japanese CRC6 Enable (TJC)
0 = use ANSI/AT&T/ITU CRC6 calculation (normal operation)
1 = use Japanese standard JT–G704 CRC6 calculation
Bit 6: Transmit F-Bit Pass-Through (TFPT)
0 = F bits sourced internally
1 = F bits sampled at TSERI
Bit 5: Transmit CRC Pass-Through (TCPT)
0 = source CRC6 bits internally
1 = CRC6 bits sampled at TSERI during F-bit time
Bit 4: Transmit Software Signaling Enable (TSSE)
0 = do not source signaling data from the TR.TSx registers regardless of the TR.SSIEx registers. The
TR.SSIEx registers still define which channels are to have B7 stuffing preformed.
1 = source signaling data as enabled by the TR.SSIEx registers
Bit 3: Global Bit 7 Stuffing (GB7S)
0 = allow the SSIEx registers to determine which channels containing all 0s are to be bit 7 stuffed
1 = force bit 7 stuffing in all 0-byte channels regardless of how the TR.SSIEx registers are programmed
Bit 2: TFDL Register Select (TFDLS)
0 = source FDL or Fs-bits from the internal TR.TFDL register (legacy FDL support mode)
1 = source FDL or Fs-bits from the internal HDLC controller
Bit 1: Transmit Blue Alarm (TBL)
0 = transmit data normally
1 = transmit an unframed all-ones code at TPOS and TNEG
Bit 0: Transmit Yellow Alarm (TYEL)
0 = do not transmit yellow alarm
1 = transmit yellow alarm
199 of 333
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
Register Name:
Register Description:
Register Address:
TR.T1TCR2
T1 Transmit Control Register 2
06h
Bit #
Name
Default
6
TSLC96
0
7
TB8ZS
0
5
TZSE
0
4
FBCT2
0
3
FBCT1
0
2
TD4YM
0
1
—
0
0
TB7ZS
0
Bit 7: Transmit B8ZS Enable (TB8ZS)
0 = B8ZS disabled
1 = B8ZS enabled
Bit 6: Transmit SLC-96/Fs-Bit Insertion Enable (TSLC96). Only set this bit to a 1 in D4 framing applications.
Must be set to 1 to source the Fs pattern from the TR.TFDL register. See Section 10.19 for details.
0 = SLC-96/Fs-bit insertion disabled
1 = SLC-96/Fs-bit insertion enabled
Bit 5: Transmit FDL Zero-Stuffer Enable (TZSE). Set this bit to 0 if using the internal HDLC controller instead of
the legacy support for the FDL.
0 = zero stuffer disabled
1 = zero stuffer enabled
Bit 4: F-Bit Corruption Type 2 (FBCT2). Setting this bit high enables the corruption of one Ft (D4 framing mode)
or FPS (ESF framing mode) bit in every 128 Ft or FPS bits as long as the bit remains set.
Bit 3: F-Bit Corruption Type 1 (FBCT1). A low-to-high transition of this bit causes the next three consecutive Ft
(D4 framing mode) or FPS (ESF framing mode) bits to be corrupted causing the remote end to experience a loss of
synchronization.
Bit 2: Transmit-Side D4 Yellow Alarm Select (TD4YM)
0 = 0s in bit 2 of all channels
1 = a 1 in the S-bit position of frame 12
Bit 0: Transmit-Side Bit 7 Zero-Suppression Enable (TB7ZS)
0 = no stuffing occurs
1 = bit 7 forced to a 1 in channels with all 0s
200 of 333
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
Register Name:
Register Description:
Register Address:
Bit #
Name
Default
7
—
0
TR.T1CCR1
T1 Common Control Register 1
07h
6
—
0
5
—
0
4
TRAI-CI
0
3
TAIS-CI
0
2
TFM
0
1
PDE
0
0
TLOOP
0
Bit 4: Transmit RAI-CI Enable (TRAI-CI). Setting this bit causes the ESF RAI-CI code to be transmitted in the
FDL bit position.
0 = do not transmit the ESF RAI-CI code
1 = transmit the ESF RAI-CI code
Bit 3: Transmit AIS-CI Enable (TAIS-CI). Setting this bit and the TBL bit (TR.T1TCR1.1) causes the AIS-CI code
to be transmitted at TPOSO and TNEGO, as defined in ANSI T1.403.
0 = do not transmit the AIS-CI code
1 = transmit the AIS-CI code (TR.T1TCR1.1 must also be set = 1)
Bit 2: Transmit Frame Mode Select (TFM)
0 = D4 framing mode
1 = ESF framing mode
Bit 1: Pulse Density Enforcer Enable (PDE). The framer always examines the transmit and receive data streams
for violations of these, which are required by ANSI T1.403: No more than 15 consecutive 0s and at least N 1s in
each and every time window of 8 x (N + 1) bits, where N = 1 through 23. Violations for the transmit and receive
data streams are reported in the TR.INFO1.6 and TR.INFO1.7 bits, respectively. When this bit is set to 1, the
T1/E1/J1 transceiver forces the transmitted stream to meet this requirement no matter the content of the
transmitted stream. When running B8ZS, this bit should be set to 0 since B8ZS encoded data streams cannot
violate the pulse density requirements.
0 = disable transmit pulse density enforcer
1 = enable transmit pulse density enforcer
Bit 0: Transmit Loop-Code Enable (TLOOP). See Section 10.20 for details.
0 = transmit data normally
1 = replace normal transmitted data with repeating code as defined in registers TR.TCD1 and TR.TCD2
201 of 333
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
Register Name:
Register Description:
Register Address:
Bit #
Name
Default
7
CH8
0
TR.SSIE1 (T1 Mode)
Software Signaling Insertion Enable 1
08h
6
CH7
0
5
CH6
0
4
CH5
0
3
CH4
0
2
CH3
0
1
CH2
0
0
CH1
0
Bits 7 to 0: Software Signaling Insertion Enable for Channels 8 to 1 (CH8 to CH1). These bits determine
which channels are to have signaling inserted from the transmit signaling registers.
0 = do not source signaling data from the TR.TSx registers for this channel
1 = source signaling data from the TR.TSx registers for this channel
Register Name:
Register Description:
Register Address:
Bit #
Name
Default
7
CH7
0
TR.SSIE1 (E1 Mode)
Software Signaling Insertion Enable 1
08h
6
CH6
0
5
CH5
0
4
CH4
0
3
CH3
0
2
CH2
0
1
CH1
0
0
UCAW
0
Bits 7 to 1: Software Signaling-Insertion Enable for Channels 7 to 1 (CH7 to CH1). These bits determine
which channels are to have signaling inserted from the transmit signaling registers.
0 = do not source signaling data from the TR.TSx registers for this channel
1 = source signaling data from the TR.TSx registers for this channel
Bit 0: Upper CAS Align/Alarm Word (UCAW). Selects the upper CAS align/alarm pattern (0000) to be sourced
from the upper 4 bits of the TS1 register.
0 = do not source the upper CAS align/alarm pattern from the TR.TS1 register
1 = source the upper CAS align/alarm pattern from the TR.TS1 register
Register Name:
Register Description:
Register Address:
Bit #
Name
Default
7
CH16
0
TR.SSIE2 (T1 Mode)
Software Signaling-Insertion Enable 2
09h
6
CH15
0
5
CH14
0
4
CH13
0
3
CH12
0
2
CH11
0
1
CH10
0
0
CH9
0
Bits 7 to 0: Software Signaling Insertion Enable for Channels 16 to 9 (CH16 to CH9). These bits determine
which channels are to have signaling inserted from the transmit signaling registers.
0 = do not source signaling data from the TR.TSx registers for this channel
1 = source signaling data from the TR.TSx registers for this channel
Register Name:
Register Description:
Register Address:
Bit #
Name
Default
7
CH15
0
TR.SSIE2 (E1 Mode)
Software Signaling Insertion Enable 2
09h
6
CH14
0
5
CH13
0
4
CH12
0
3
CH11
0
2
CH10
0
1
CH9
0
0
CH8
0
Bits 7 to 0: Software Signaling Insertion Enable for Channels 15 to 8 (CH15 to CH8). These bits determine
which channels are to have signaling inserted from the transmit signaling registers.
0 = do not source signaling data from the TR.TSx registers for this channel
1 = source signaling data from the TR.TSx registers for this channel
202 of 333
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
Register Name:
Register Description:
Register Address:
Bit #
Name
Default
7
CH24
0
TR.SSIE3 (T1 Mode)
Software Signaling-Insertion Enable 3
0Ah
6
CH23
0
5
CH22
0
4
CH21
0
3
CH20
0
2
CH19
0
1
CH18
0
0
CH17
0
Bits 7 to 0: Software Signaling Insertion Enable for Channels 24 to 17 (CH24 to CH17). These bits determine
which channels are to have signaling inserted from the transmit signaling registers.
0 = do not source signaling data from the TR.TSx registers for this channel
1 = source signaling data from the TR.TSx registers for this channel
Register Name:
Register Description:
Register Address:
Bit #
Name
Default
7
CH22
0
TR.SSIE3 (E1 Mode)
Software Signaling Insertion Enable 3
0Ah
6
CH21
0
5
CH20
0
4
CH19
0
3
CH18
0
2
CH17
0
1
CH16
0
0
LCAW
0
Bits 7 to 1: Software Signaling Insertion Enable for LCAW and Channels 22 to 16 (CH22 to CH16). These
bits determine which channels are to have signaling inserted from the transmit signaling registers.
0 = do not source signaling data from the TR.TSx registers for this channel
1 = source signaling data from the TR.TSx registers for this channel
Bit 0: Lower CAS Align/Alarm Word (LCAW). Selects the lower CAS align/alarm bits (xyxx) to be sourced from
the lower 4 bits of the TS1 register.
0 = do not source the lower CAS align/alarm bits from the TR.TS1 register
1 = source the lower CAS alarm align/bits from the TR.TS1 register
Register Name:
Register Description:
Register Address:
Bit #
Name
Default
7
CH30
0
TR.SSIE4
Software Signaling Insertion Enable 4
0Bh
6
CH29
0
5
CH28
0
4
CH27
0
3
CH26
0
2
CH25
0
1
CH24
0
0
CH23
0
Bits 7 to 0: Software Signaling Insertion Enable for Channels 30 to 23 (CH30 to CH23). These bits determine
which channels are to have signaling inserted from the transmit signaling registers.
0 = do not source signaling data from the TR.TSx registers for this channel
1 = source signaling data from the TR.TSx registers for this channel
203 of 333
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
Register Name:
Register Description:
Register Address:
Bit #
Name
Default
7
CH8
0
TR.T1RDMR1
T1 Receive Digital-Milliwatt Enable Register 1
0Ch
6
CH7
0
5
CH6
0
4
CH5
0
3
CH4
0
2
CH3
0
1
CH2
0
0
CH1
0
1
CH10
0
0
CH9
0
1
CH18
0
0
CH17
0
Bits 7 to 0: Receive Digital-Milliwatt Enable for Channels 8 to 1 (CH8 to CH1)
0 = do not affect the receive data associated with this channel
1 = replace the receive data associated with this channel with digital-milliwatt code
Register Name:
Register Description:
Register Address:
Bit #
Name
Default
7
CH16
0
TR.T1RDMR2
T1 Receive Digital-Milliwatt Enable Register 2
0Dh
6
CH15
0
5
CH14
0
4
CH13
0
3
CH12
0
2
CH11
0
Bits 7 to 0: Receive Digital-Milliwatt Enable for Channels 16 to 9 (CH16 to CH9)
0 = do not affect the receive data associated with this channel
1 = replace the receive data associated with this channel with digital-milliwatt code
Register Name:
Register Description:
Register Address:
Bit #
Name
Default
7
CH24
0
TR.T1RDMR3
T1 Receive Digital-Milliwatt Enable Register 3
0Eh
6
CH23
0
5
CH22
0
4
CH21
0
3
CH20
0
2
CH19
0
Bits 7 to 0: Receive Digital-Milliwatt Enable for Channels 24 to 17 (CH24 to CH17)
0 = do not affect the receive data associated with this channel
1 = replace the receive data associated with this channel with digital-milliwatt code
204 of 333
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
Register Name:
Register Description:
Register Address:
Bit #
Name
Default
7
ID7
1
TR.IDR
Device Identification Register
0Fh
6
ID6
0
5
ID5
1
4
ID4
1
3
ID3
X
2
ID2
X
1
ID1
X
0
ID0
X
Bits 7 to 4: Device ID (ID7 to ID4). The upper four bits of TR.IDR are used to display the transceiver ID.
Bits 3 to 0: Chip Revision Bits (ID3 to ID0). The lower four bits of TR.IDR are used to display the die revision of
the chip. IDO is the LSB of a decimal code that represents the chip revision.
Register Name:
Register Description:
Register Address:
Bit #
Name
Default
7
RPDV
0
TR.INFO1
Information Register 1
10h
6
TPDV
0
5
COFA
0
4
8ZD
0
3
16ZD
0
2
SEFE
0
1
B8ZS
0
0
FBE
0
Bit 7: Receive Pulse-Density Violation Event (RPDV). Set when the receive data stream does not meet the
ANSI T1.403 requirements for pulse density.
Bit 6: Transmit Pulse-Density Violation Event (TPDV). Set when the transmit data stream does not meet the
ANSI T1.403 requirements for pulse density.
Bit 5: Change-of-Frame Alignment Event (COFA). Set when the last resync resulted in a change-of-frame or
multiframe alignment.
Bit 4: Eight Zero-Detect Event (8ZD). Set when a string of at least eight consecutive 0s (regardless of the length
of the string) have been received at RPOSI and RNEGI.
Bit 3: Sixteen Zero-Detect Event (16ZD). Set when a string of at least 16 consecutive 0s (regardless of the length
of the string) have been received at RPOSI and RNEGI.
Bit 2: Severely Errored Framing Event (SEFE). Set when two out of six framing bits (Ft or FPS) are received in
error.
Bit 1: B8ZS Codeword Detect Event (B8ZS). Set when a B8ZS codeword is detected at RPOS and RNEG
independent of whether the B8ZS mode is selected or not by TR.T1TCR2.7. Useful for automatically setting the
line coding.
Bit 0: Frame Bit-Error Event (FBE). Set when an Ft (D4) or FPS (ESF) framing bit is received in error.
205 of 333
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
Register Name:
Register Description:
Register Address:
Bit #
Name
Default
7
BSYNC
0
TR.INFO2
Information Register 2
11h
6
BD
0
5
TCLE
0
4
TOCD
0
3
RL3
0
2
RL2
0
1
RL1
0
0
RL0
0
Bit 7: BERT Real-Time Synchronization Status (BSYNC). Real-time status of the synchronizer (this bit is not
latched). This bit is set when the incoming pattern matches for 32 consecutive bit positions. It is cleared when six
or more bits out of 64 are received in error. Refer to BSYNC in the BERT status register, TR.SR9, for an interruptgenerating version of this signal.
Bit 6: BOC Detected (BD). A real-time bit that is set high when the BOC detector is presently seeing a valid
sequence and set low when no BOC is currently being detected.
Bit 5: Transmit Current-Limit Exceeded (TCLE). A real-time bit that is set when the 50mA (RMS) current limiter
is activated, whether the current limiter is enabled or not.
Bit 4: Transmit Open-Circuit Detect (TOCD). A real-time bit that is set when the device detects that the TTIP and
TRING outputs are open-circuited.
Bits 3 to 0: Receive Level Bits (RL3 to RL0). Real-time bits.
RL3
0
0
0
0
0
0
0
0
1
1
1
1
1
1
1
1
RL2
0
0
0
0
1
1
1
1
0
0
0
0
1
1
1
1
RL1
0
0
1
1
0
0
1
1
0
0
1
1
0
0
1
1
RL0
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
Receive Level (dB)
Greater than -2.5
-2.5 to -5.0
-5.0 to -7.5
-7.5 to -10.0
-10.0 to -12.5
-12.5 to -15.0
-15.0 to -17.5
-17.5 to -20.0
-20.0 to -22.5
-22.5 to -25.0
-25.0 to -27.5
-27.5 to -30.0
-30.0 to -32.5
-32.5 to -35.0
-35.0 to -37.5
Less than -37.5
Note: RL0 through RL3 only indicate the signal range as specified by the EGL bit in TR.LIC1. Example: if EGL =
1 and in T1 mode, RL0 through RL3 will only indicate a signal range of >-2.5dB to –15dB even if the signal is < 15dB.
206 of 333
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
Register Name:
Register Description:
Register Address:
Bit #
Name
Default
7
—
0
TR.INFO3
Information Register 3
12h
6
—
0
5
—
0
4
—
0
3
—
0
2
CRCRC
0
1
FASRC
0
0
CASRC
0
Bit 2: CRC Resync Criteria Met Event (CRCRC). Set when 915/1000 codewords are received in error.
Bit 1: FAS Resync Criteria Met Event (FASRC). Set when three consecutive FAS words are received in error.
Note: During a CRC resync the FAS synchronizer is brought online to verify the FAS alignment. If during this
process an FAS emulator exists, the FAS synchronizer may temporarily align to the emulator. The FASRC will go
active indicating a search for a valid FAS has been activated.
Bit 0: CAS Resync Criteria Met Event (CASRC). Set when two consecutive CAS MF alignment words are
received in error.
Register Name:
Register Description:
Register Address:
Bit #
Name
Default
7
SR8
0
TR.IIR1
Interrupt Information Register 1
14h
6
SR7
0
5
SR6
0
4
SR5
0
3
SR4
0
2
SR3
0
1
SR2
0
0
SR1
0
Bits 7 to 0: Status Register 8 to 1. When set to 1, these bits indicate that an enabled interrupt is active in the
associated T1/E1/J1 status register.
Register Name:
Register Description:
Register Address:
Bit #
Name
Default
7
—
0
TR.IIR2
Interrupt Information Register 2
15h
6
—
0
5
—
0
4
—
0
3
—
0
2
—
0
1
—
0
0
SR9
0
Bits 0: Status Register 9. When set to 1, this bit indicates that an enabled interrupt is active in the associated
T1/E1/J1 status register.
207 of 333
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
Register Name:
Register Description:
Register Address:
TR.SR1
Status Register 1
16h
Bit #
Name
Default
6
TIMER
0
7
ILUT
0
5
RSCOS
0
4
JALT
0
3
LRCL
0
2
TCLE
0
1
TOCD
0
0
LOLITC
0
Bit 7: Input Level Under Threshold (ILUT). This bit is set whenever the input level at RTIP and RRING falls
below the threshold set by the value in TR.CCR4.4 through TR.CCR4.7. The level must remain below the
programmed threshold for approximately 50ms for this bit to be set. This is a double interrupt bit (Section 9.6).
Bit 6: Timer Event (TIMER). Follows the error-counter update interval as determined by the ECUS bit in the errorcounter configuration register (TR.ERCNT).
T1: set on increments of 1 second or 42ms based on RCLKO
E1: set on increments of 1 second or 62.5ms based on RCLKO
Bit 5: Receive Signaling Change-of-State Event (RSCOS). Set when any channel selected by the receive
signaling change-of-state interrupt-enable registers (TR.RSCSE1 through TR.RSCSE4) changes signaling state.
Bit 4: Jitter Attenuator Limit Trip Event (JALT). Set when the jitter attenuator FIFO reaches to within 4 bits of its
useful limit. This bit is cleared when read. Useful for debugging jitter attenuation operation.
Bit 3: Line Interface Receive Carrier Loss Condition (LRCL). Set when the carrier signal is lost. This is a double
interrupt bit (Section 9.6).
Bit 2: Transmit Current-Limit Exceeded Condition (TCLE). Set when the 50mA (RMS) current limiter is
activated, whether the current limiter is enabled or not. This is a double interrupt bit (Section 9.6).
Bit 1: Transmit Open-Circuit Detect Condition (TOCD). Set when the device detects that the TTIP and TRING
outputs are open-circuited. This is a double interrupt bit (Section 9.6).
Bit 0: Loss of Line Interface Transmit Clock Condition (LOLITC). Set when TDCLKI has not transitioned for
one channel time. This is a double interrupt bit (Section 9.6).
208 of 333
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
Register Name:
Register Description:
Register Address:
TR.IMR1
Interrupt Mask Register 1
17h
Bit #
Name
Default
6
TIMER
0
7
ILUT
0
5
RSCOS
0
4
JALT
0
3
LRCL
0
Bit 7: Input Level Under Threshold (ILUT)
0 = interrupt masked
1 = interrupt enabled
Bit 6: Timer Event (TIMER)
0 = interrupt masked
1 = interrupt enabled
Bit 5: Receive Signaling Change-of-State Event (RSCOS)
0 = interrupt masked
1 = interrupt enabled
Bit 4: Jitter Attenuator Limit Trip Event (JALT)
0 = interrupt masked
1 = interrupt enabled
Bit 3: Line Interface Receive Carrier-Loss Condition (LRCL)
0 = interrupt masked
1 = interrupt enabled—generates interrupts on rising and falling edges
Bit 2: Transmit Current-Limit Exceeded Condition (TCLE)
0 = interrupt masked
1 = interrupt enabled—generates interrupts on rising and falling edges
Bit 1: Transmit Open-Circuit Detect Condition (TOCD)
0 = interrupt masked
1 = interrupt enabled—generates interrupts on rising and falling edges
Bit 0: Loss-of-Transmit Clock Condition (LOLITC)
0 = interrupt masked
1 = interrupt enabled—generates interrupts on rising and falling edges
209 of 333
2
TCLE
0
1
TOCD
0
0
LOLITC
0
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
Register Name:
Register Description:
Register Address:
TR.SR2
Status Register 2
18h
Bit #
Name
Default
6
RUA1C
0
7
RYELC
0
5
FRCLC
0
4
RLOSC
0
3
RYEL
0
2
RUA1
0
1
FRCL
0
0
RLOS
0
Bit 7: Receive Yellow Alarm Clear Event (RYELC) (T1 Only). Set when the receive Yellow Alarm condition is no
longer detected.
Bit 6: Receive Unframed All-Ones Clear Event (RUA1C). Set when the unframed all 1s condition is no longer
detected.
Bit 5: Framer Receive Carrier-Loss Clear Event (FRCLC). Set when the carrier loss condition at RPOSI and
RNEGI is no longer detected.
Bit 4: Receive Loss-of-Sync Clear Event (RLOSC). Set when the framer achieves synchronization; remains set
until read.
Bit 3: Receive Yellow Alarm Condition (RYEL) (T1 Only). Set when a Yellow Alarm is received at RPOSI and
RNEGI.
Bit 2: Receive Unframed All-Ones (T1 Blue Alarm, E1 AIS) Condition (RUA1). Set when an unframed all 1s
code is received at RPOSI and RNEGI.
Bit 1: Framer Receive Carrier-Loss Condition (FRCL). Set when 255 (or 2048 if TR.E1RCR2.0 = 1) E1 mode or
192 T1 mode consecutive 0s have been detected at RPOSI and RNEGI.
Bit 0: Receive Loss-of-Sync Condition (RLOS). Set when the transceiver is not synchronized to the received
data stream.
210 of 333
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
Register Name:
Register Description:
Register Address:
TR.IMR2
Interrupt Mask Register 2
19h
Bit #
Name
Default
6
RUA1C
0
7
RYELC
0
5
FRCLC
0
4
RLOSC
0
3
RYEL
0
Bit 7: Receive Yellow Alarm Clear Event (RYELC)
0 = interrupt masked
1 = interrupt enabled
Bit 6: Receive Unframed All-Ones Condition Clear Event (RUA1C)
0 = interrupt masked
1 = interrupt enabled
Bit 5: Framer Receive Carrier Loss Condition Clear (FRCLC)
0 = interrupt masked
1 = interrupt enabled
Bit 4: Receive Loss-of-Sync Clear Event (RLOSC)
0 = interrupt masked
1 = interrupt enabled
Bit 3: Receive Yellow Alarm Condition (RYEL)
0 = interrupt masked
1 = interrupt enabled—interrupts on rising edge only
Bit 2: Receive Unframed All-Ones (Blue Alarm) Condition (RUA1)
0 = interrupt masked
1 = interrupt enabled—interrupts on rising edge only
Bit 1: Framer Receive Carrier Loss Condition (FRCL)
0 = interrupt masked
1 = interrupt enabled—interrupts on rising edge only
Bit 0: Receive Loss-of-Sync Condition (RLOS)
0 = interrupt masked
1 = interrupt enabled—interrupts on rising edge only
211 of 333
2
RUA1
0
1
FRCL
0
0
RLOS
0
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
Register Name:
Register Description:
Register Address:
Bit #
Name
Default
7
LSPARE
0
TR.SR3
Status Register 3
1Ah
6
LDN
0
5
LUP
0
4
LOTC
0
3
LORC
0
2
V52LNK
0
1
RDMA
0
0
RRA
0
Bit 7: Spare Code Detected Condition (LSPARE) (T1 Only). Set when the spare code as defined in the
TR.RSCD1/2 registers is being received. This is a double interrupt bit. See Section 9.6.
Bit 6: Loop-Down Code Detected Condition (LDN) (T1 Only). Set when the loop down code as defined in the
TR.RDNCD1/2 register is being received. This is a double interrupt bit. See Section 9.6.
Bit 5: Loop-Up Code Detected Condition (LUP) (T1 Only). Set when the loop-up code as defined in the
TR.RUPCD1/2 register is being received. This is a double interrupt bit. See Section 9.6.
Bit 4: Loss-of-Transmit Clock Condition (LOTC). Set when the TCLKT pin has not transitioned for one channel
time. Forces the LOTC pin high if enabled by TR.CCR1.0. This is a double interrupt bit. See Section 9.6.
Bit 3: Loss-of-Receive Clock Condition (LORC). Set when the RDCLKI pin has not transitioned for one channel
time. This is a double interrupt bit. See Section 9.6.
Bit 2: V5.2 Link Detected Condition (V52LNK) (E1 Only). Set on detection of a V5.2 link identification signal
(G.965). This is a double interrupt bit. See Section 9.6
Bit 1: Receive Distant MF Alarm Condition (RDMA) (E1 Only). Set when bit 6 of time slot 16 in frame 0 has
been set for two consecutive multiframes. This alarm is not disabled in the CCS signaling mode. This is a double
interrupt bit. See Section 9.6.
Bit 0: Receive Remote Alarm Condition (RRA) (E1 Only). Set when a remote alarm is received at RPOSI and
RNEGI. This is a double interrupt bit. See Section 9.6.
212 of 333
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
Register Name:
Register Description:
Register Address:
Bit #
Name
Default
7
LSPARE
0
TR.IMR3
Interrupt Mask Register 3
1Bh
6
LDN
0
5
LUP
0
4
LOTC
0
3
LORC
0
Bit 7: Spare Code Detected Condition (LSPARE)
0 = interrupt masked
1 = interrupt enabled—interrupts on rising and falling edges
Bit 6: Loop-Down Code-Detected Condition (LDN)
0 = interrupt masked
1 = interrupt enabled—interrupts on rising and falling edges
Bit 5: Loop-Up Code-Detected Condition (LUP)
0 = interrupt masked
1 = interrupt enabled—interrupts on rising and falling edges
Bit 4: Loss-of-Transmit Clock Condition (LOTC)
0 = interrupt masked
1 = interrupt enabled—interrupts on rising and falling edges
Bit 3: Loss-of-Receive Clock Condition (LORC)
0 = interrupt masked
1 = interrupt enabled—interrupts on rising and falling edges
Bit 2: V5.2 Link Detected Condition (V52LNK)
0 = interrupt masked
1 = interrupt enabled—interrupts on rising and falling edges
Bit 1: Receive Distant MF Alarm Condition (RDMA)
0 = interrupt masked
1 = interrupt enabled—interrupts on rising and falling edges
Bit 0: Receive Remote Alarm Condition (RRA)
0 = interrupt masked
1 = interrupt enabled—interrupts on rising and falling edges
213 of 333
2
V52LNK
0
1
RDMA
0
0
RRA
0
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
Register Name:
Register Description:
Register Address:
Bit #
Name
Default
7
RAIS-CI
0
TR.SR4
Status Register 4
1Ch
6
RSAO
0
5
RSAZ
0
4
TMF
0
3
TAF
0
2
RMF
0
1
RCMF
0
0
RAF
0
Bit 7: Receive AIS-CI Event (RAIS-CI) (T1 Only). Set when the receiver detects the AIS-CI pattern as defined in
ANSI T1.403.
Bit 6: Receive Signaling All-Ones Event (RSAO) (E1 Only). Set when the contents of time slot 16 contains fewer
than three 0s over 16 consecutive frames. This alarm is not disabled in the CCS signaling mode.
Bit 5: Receive Signaling All-Zeros Event (RSAZ) (E1 Only). Set when over a full MF, time slot 16 contains
all 0s.
Bit 4: Transmit Multiframe Event (TMF)
E1 Mode: Set every 2ms (regardless if CRC4 is enabled) on transmit multiframe boundaries. Used to alert
the host that signaling data needs to be updated.
T1 Mode: Set every 1.5ms on D4 MF boundaries or every 3ms on ESF MF boundaries.
Bit 3: Transmit Align Frame Event (TAF) (E1 Only). Set every 250µs at the beginning of align frames. Used to
alert the host that the TR.TAF and TR.TNAF registers need to be updated.
Bit 2: Receive Multiframe Event (RMF)
E1 Mode: Set every 2ms (regardless if CAS signaling is enabled or not) on receive multiframe boundaries.
Used to alert the host that signaling data is available.
T1 Mode: Set every 1.5ms on D4 MF boundaries or every 3ms on ESF MF boundaries.
Bit 1: Receive CRC4 Multiframe Event (RCMF) (E1 Only). Set on CRC4 multiframe boundaries; continues to set
every 2ms on an arbitrary boundary if CRC4 is disabled.
Bit 0: Receive Align Frame Event (RAF) (E1 Only). Set every 250µs at the beginning of align frames. Used to
alert the host that Si and Sa bits are available in the TR.RAF and TR.RNAF registers.
214 of 333
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
Register Name:
Register Description:
Register Address:
Bit #
Name
Default
7
RAIS-CI
0
TR.IMR4
Interrupt Mask Register 4
1Dh
6
RSAO
0
5
RSAZ
0
4
TMF
0
Bit 7: Receive AIS-CI Event (RAIS-CI)
0 = interrupt masked
1 = interrupt enabled
Bit 6: Receive Signaling All-Ones Event (RSAO)
0 = interrupt masked
1 = interrupt enabled
Bit 5: Receive Signaling All-Zeros Event (RSAZ)
0 = interrupt masked
1 = interrupt enabled
Bit 4: Transmit Multiframe Event (TMF)
0 = interrupt masked
1 = interrupt enabled
Bit 3: Transmit Align Frame Event (TAF)
0 = interrupt masked
1 = interrupt enabled
Bit 2: Receive Multiframe Event (RMF)
0 = interrupt masked
1 = interrupt enabled
Bit 1: Receive CRC4 Multiframe Event (RCMF)
0 = interrupt masked
1 = interrupt enabled
Bit 0: Receive Align Frame Event (RAF)
0 = interrupt masked
1 = interrupt enabled
215 of 333
3
TAF
0
2
RMF
0
1
RCMF
0
0
RAF
0
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
Register Name:
Register Description:
Register Address:
Bit #
Name
Default
7
—
0
TR.SR5
Status Register 5
1Eh
6
—
0
5
TESF
0
4
TESEM
0
3
TSLIP
0
2
RESF
0
1
RESEM
0
0
RSLIP
0
Bit 5: Transmit Elastic Store Full Event (TESF). Set when the transmit elastic store buffer fills and a frame is
deleted.
Bit 4: Transmit Elastic Store Empty Event (TESEM). Set when the transmit elastic store buffer empties and a
frame is repeated.
Bit 3: Transmit Elastic Store Slip-Occurrence Event (TSLIP). Set when the transmit elastic store has either
repeated or deleted a frame.
Bit 2: Receive Elastic Store Full Event (RESF). Set when the receive elastic store buffer fills and a frame is
deleted.
Bit 1: Receive Elastic Store Empty Event (RESEM). Set when the receive elastic store buffer empties and a
frame is repeated.
Bit 0: Receive Elastic Store Slip-Occurrence Event (RSLIP). Set when the receive elastic store has either
repeated or deleted a frame.
216 of 333
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
Register Name:
Register Description:
Register Address:
Bit #
Name
Default
7
—
0
TR.IMR5
Interrupt Mask Register 5
1Fh
6
—
0
5
TESF
0
4
TESEM
0
Bit 5: Transmit Elastic Store Full Event (TESF)
0 = interrupt masked
1 = interrupt enabled
Bit 4: Transmit Elastic Store Empty Event (TESEM)
0 = interrupt masked
1 = interrupt enabled
Bit 3: Transmit Elastic Store Slip-Occurrence Event (TSLIP)
0 = interrupt masked
1 = interrupt enabled
Bit 2: Receive Elastic Store Full Event (RESF)
0 = interrupt masked
1 = interrupt enabled
Bit 1: Receive Elastic Store Empty Event (RESEM)
0 = interrupt masked
1 = interrupt enabled
Bit 0: Receive Elastic Store Slip-Occurrence Event (RSLIP)
0 = interrupt masked
1 = interrupt enabled
217 of 333
3
TSLIP
0
2
RESF
0
1
RESEM
0
0
RSLIP
0
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
Register Name:
Register Description:
Register Address:
TR.SR6, TR.SR7
HDLC #1 Status Register 6
HDLC #2 Status Register 7
20h, 22h
Bit #
Name
Default
6
TMEND
0
7
—
0
5
RPE
0
4
RPS
0
3
RHWM
0
2
RNE
0
1
TLWM
0
0
TNF
0
Bit 6: Transmit Message-End Event (TMEND). Set when the transmit HDLC controller has finished sending a
message. This is a latched bit and is cleared when read.
Bit 5: Receive Packet-End Event (RPE). Set when the HDLC controller detects either the finish of a valid
message (i.e., CRC check complete) or when the controller has experienced a message fault such as a CRC
checking error, or an overrun condition, or an abort has been seen. This is a latched bit and is cleared when read.
Bit 4: Receive Packet-Start Event (RPS). Set when the HDLC controller detects an opening byte. This is a
latched bit and is cleared when read.
Bit 3: Receive FIFO Above High-Watermark Condition (RHWM). Set when the receive 128-byte FIFO fills
beyond the high watermark as defined by the receive high-watermark register (TR.RHWMR).
Bit 2: Receive FIFO Not Empty Condition (RNE). Set when the receive 128-byte FIFO has at least 1 byte
available for a read.
Bit 1: Transmit FIFO Below Low-Watermark Condition (TLWM). Set when the transmit 128-byte FIFO empties
beyond the low watermark as defined by the transmit low-watermark register (TR.TLWMR).
Bit 0: Transmit FIFO Not Full Condition (TNF). Set when the transmit 128-byte FIFO has at least 1 byte
available.
218 of 333
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
Register Name:
Register Description:
Register Address:
TR.IMR6, TR.IMR7
HDLC # 1 Interrupt Mask Register 6
HDLC # 2 Interrupt Mask Register 7
21h, 23h
Bit #
Name
Default
6
TMEND
0
7
—
0
5
RPE
0
4
RPS
0
3
RHWM
0
Bit 6: Transmit Message-End Event (TMEND)
0 = interrupt masked
1 = interrupt enabled
Bit 5: Receive Packet-End Event (RPE)
0 = interrupt masked
1 = interrupt enabled
Bit 4: Receive Packet-Start Event (RPS)
0 = interrupt masked
1 = interrupt enabled
Bit 3: Receive FIFO Above High-Watermark Condition (RHWM)
0 = interrupt masked
1 = interrupt enabled—interrupts on rising edge only
Bit 2: Receive FIFO Not Empty Condition (RNE)
0 = interrupt masked
1 = interrupt enabled—interrupts on rising edge only
Bit 1: Transmit FIFO Below Low-Watermark Condition (TLWM)
0 = interrupt masked
1 = interrupt enabled—interrupts on rising edge only
Bit 0: Transmit FIFO Not Full Condition (TNF)
0 = interrupt masked
1 = interrupt enabled—interrupts on rising edge only
219 of 333
2
RNE
0
1
TLWM
0
0
TNF
0
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
Register Name:
Register Description:
TR.INFO5, TR.INFO6
HDLC #1 Information Register
HDLC #2 Information Register
2Eh, 2Fh
Register Address:
Bit #
Name
Default
7
—
0
6
—
0
5
TEMPTY
0
4
TFULL
0
3
REMPTY
0
2
PS2
0
1
PS1
0
0
PS0
0
Bit 5: Transmit FIFO Empty (TEMPTY). A real-time bit that is set high when the FIFO is empty.
Bit 4: Transmit FIFO Full (TFULL). A real-time bit that is set high when the FIFO is full.
Bit 3: Receive FIFO Empty (REMPTY). A real-time bit that is set high when the receive FIFO is empty.
Bits 2 to 0: Receive Packet Status (PS0 to PS2). These are real-time bits indicating the status as of the last read
of the receive FIFO.
PS2
PS1
PS0
0
0
0
In Progress
0
0
1
Packet OK: Packet ended with correct CRC codeword
0
1
0
0
1
1
1
0
0
Register Name:
Register Description:
Register Address:
Bit #
Name
Default
7
—
0
Packet Status
CRC Error: A closing flag was detected, preceded by a corrupt CRC
codeword
Abort: Packet ended because an abort signal was detected (seven
or more 1s in a row).
Overrun: HDLC controller terminated reception of packet because
receive FIFO is full.
TR.INFO4
HDLC Event Information Register #4
2Dh
6
—
0
5
—
0
4
—
0
3
H2UDR
0
2
H2OBT
0
1
H1UDR
0
0
H1OBT
0
Bit 3: HDLC #2 Transmit FIFO Underrun Event (H2UDR). Set when the transmit FIFO empties out without
having seen the TMEND bit set. An abort is automatically sent. This bit is latched and is cleared when read.
Bit 2: HDLC #2 Opening Byte Event (H2OBT). Set when the next byte available in the receive FIFO is the first
byte of a message.
Bit 1: HDLC #1 Transmit FIFO Underrun Event (H1UDR). Set when the transmit FIFO empties out without
having seen the TMEND bit set. An abort is automatically sent. This bit is latched and is cleared when read.
Bit 0: HDLC #1 Opening Byte Event (H1OBT). Set when the next byte available in the receive FIFO is the first
byte of a message.
220 of 333
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
Register Name:
Register Description:
Register Address:
Bit #
Name
Default
7
—
0
TR.SR8
Status Register 8
24h
6
—
0
5
BOCC
0
4
RFDLAD
0
3
RFDLF
0
2
TFDLE
0
1
RMTCH
0
0
RBOC
0
Bit 5: BOC Clear Event (BOCC). Set when 30 FDL bits occur without an abort sequence.
Bit 4: RFDL Abort Detect Event (RFDLAD). Set when eight consecutive 1s are received on the FDL.
Bit 3: RFDL Register Full Event (RFDLF). Set when the receive FDL buffer (TR.RFDL) fills to capacity.
Bit 2: TFDL Register Empty Event (TFDLE). Set when the transmit FDL buffer (TR.TFDL) empties.
Bit 1: Receive FDL Match Event (RMTCH). Set whenever the contents of the TR.RFDL register matches
TR.RFDLM1 or TR.RFDLM2.
Bit 0: Receive BOC Detector Change-of-State Event (RBOC). Set whenever the BOC detector sees a change of
state to a valid BOC. The setting of this bit prompts the user to read the TR.RFDL register.
Register Name:
Register Description:
Register Address:
Bit #
Name
Default
7
—
0
TR.IMR8
Interrupt Mask Register 8
25h
6
—
0
5
BOCC
0
4
RFDLAD
0
Bit 5: BOC Clear Event (BOCC)
0 = interrupt masked
1 = interrupt enabled
Bit 4: RFDL Abort Detect Event (RFDLAD)
0 = interrupt masked
1 = interrupt enabled
Bit 3: RFDL Register Full Event (RFDLF)
0 = interrupt masked
1 = interrupt enabled
Bit 2: TFDL Register Empty Event (TFDLE)
0 = interrupt masked
1 = interrupt enabled
Bit 1: Receive FDL Match Event (RMTCH)
0 = interrupt masked
1 = interrupt enabled
Bit 0: Receive BOC Detector Change-of-State Event (RBOC)
0 = interrupt masked
1 = interrupt enabled
221 of 333
3
RFDLF
0
2
TFDLE
0
1
RMTCH
0
0
RBOC
0
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
Register Name:
Register Description:
Register Address:
Bit #
Name
Default
7
—
0
TR.SR9
Status Register 9
26h
6
BBED
0
5
BBCO
0
4
BEC0
0
3
BRA1
0
2
BRA0
0
1
BRLOS
0
0
BSYNC
0
Bit 6: BERT Bit-Error Detected (BED) Event (BBED). A latched bit that is set when a bit error is detected. The
receive BERT must be in synchronization for it to detect bit errors. Cleared when read.
Bit 5: BERT Bit-Counter Overflow Event (BBCO). A latched bit that is set when the 32-bit BERT bit counter
(BBC) overflows. Cleared when read and is not set again until another overflow occurs.
Bit 4: BERT Error-Counter Overflow (BECO) Event (BECO). A latched bit that is set when the 24-bit BERT error
counter (BEC) overflows. Cleared when read and is not set again until another overflow occurs.
Bit 3: BERT Receive All-Ones Condition (BRA1). A latched bit that is set when 32 consecutive 1s are received.
Allowed to be cleared once a 0 is received. This is a double interrupt bit (Section 9.6).
Bit 2: BERT Receive All-Zeros Condition (BRA0). A latched bit that is set when 32 consecutive 0s are received.
Allowed to be cleared once a 1 is received. This is a double interrupt bit (Section 9.6).
Bit 1: BERT Receive Loss-of-Synchronization Condition (BRLOS). A latched bit that is set whenever the
receive BERT begins searching for a pattern. Once synchronization is achieved, this bit remains set until read. This
is a double interrupt bit (Section 9.6).
Bit 0: BERT in Synchronization Condition (BSYNC). Set when the incoming pattern matches for 32 consecutive
bit positions. Refer to BSYNC in the TR.INFO2 register for a real-time version of this bit. This is a double interrupt
bit (Section 9.6).
222 of 333
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
Register Name:
Register Description:
Register Address:
Bit #
Name
Default
7
—
0
TR.IMR9
Interrupt Mask Register 9
27h
6
BBED
0
5
BBCO
0
4
BEC0
0
3
BRA1
0
Bit 6: Bit-Error Detected Event (BBED)
0 = interrupt masked
1 = interrupt enabled
Bit 5: BERT Bit-Counter Overflow Event (BBCO)
0 = interrupt masked
1 = interrupt enabled
Bit 4: BERT Error-Counter Overflow Event (BECO)
0 = interrupt masked
1 = interrupt enabled
Bit 3: Receive All-Ones Condition (BRA1)
0 = interrupt masked
1 = interrupt enabled—interrupts on rising and falling edges
Bit 2: Receive All-Zeros Condition (BRA0)
0 = interrupt masked
1 = interrupt enabled—interrupts on rising and falling edges
Bit 1: Receive Loss-of-Synchronization Condition (BRLOS)
0 = interrupt masked
1 = interrupt enabled—interrupts on rising and falling edges
Bit 0: BERT in Synchronization Condition (BSYNC)
0 = interrupt masked
1 = interrupt enabled—interrupts on rising and falling edges
223 of 333
2
BRA0
0
1
BRLOS
0
0
BSYNC
0
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
Register Name:
Register Description:
Register Address:
TR.PCPR
Per-Channel Pointer Register
28h
Bit #
Name
Default
6
RSRCS
0
7
RSAOICS
0
5
RFCS
0
4
BRCS
0
3
THSCS
0
2
PEICS
0
1
TFCS
0
0
BTCS
0
Bit 7: Receive Signaling All-Ones Insertion Channel Select (RSAOICS)
Bit 6: Receive Signaling Reinsertion Channel Select (RSRCS)
Bit 5: Receive Fractional Channel Select (RFCS)
Bit 4: Bert Receive Channel Select (BRCS)
Bit 3: Transmit Hardware Signaling Channel Select (THSCS)
Bit 2: Payload Error Insert Channel Select (PEICS)
Bit 1: Transmit Fractional Channel Select (TFCS)
Bit 0: Bert Transmit Channel Select (BTCS)
See Section 10.2 for a general overview of per-channel operation. See Section 10.10 for more information on perchannel idle code generation. See Section 10.2 for more information on per-channel loopback operation.
224 of 333
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
Register Name:
Register Description:
Register Address:
Bit #
Name
Default
7
—
CH8
Register Name:
Register Description:
Register Address:
Bit #
Name
Default
7
—
CH16
Register Name:
Register Description:
Register Address:
Bit #
Name
Default
7
—
CH24
Register Name:
Register Description:
Register Address:
Bit #
Name
Default
7
—
CH32
TR.PCDR1
Per-Channel Data Register 1
29h
6
—
CH7
5
—
CH6
4
—
CH5
3
—
CH4
2
—
CH3
1
—
CH2
0
—
CH1
3
—
CH12
2
—
CH11
1
—
CH10
0
—
CH9
3
—
CH20
2
—
CH19
1
—
CH18
0
—
CH17
3
—
CH28
2
—
CH27
1
—
CH26
0
—
CH25
TR.PCDR2
Per-Channel Data Register 2
2Ah
6
—
CH15
5
—
CH14
4
—
CH13
TR.PCDR3
Per-Channel Data Register 3
2Bh
6
—
CH23
5
—
CH22
4
—
CH21
TR.PCDR4
Per-Channel Data Register 4
2Ch
6
—
CH31
5
—
CH30
4
—
CH29
See Section 10.2 for a general overview of per-channel operation. See Section 10.10 for more information on perchannel idle code generation. See Section 10.2 for more information on per-channel loopback operation.
225 of 333
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
Register Name:
Register Description:
Register Address:
Bit #
Name
Default
7
CSC5
0
TR.INFO7
Information Register 7 (Real-Time, Non-Latched Register)
30h
6
CSC4
0
5
CSC3
0
4
CSC2
0
3
CSC0
0
2
FASSA
0
1
CASSA
0
0
CRC4SA
0
Bits 7 to 3: CRC4 Sync Counter Bits (CSC5 to CSC2, CSC0). The CRC4 sync counter increments each time the
8ms CRC4 multiframe search times out. The counter is cleared when the framer has successfully obtained
synchronization at the CRC4 level. The counter can also be cleared by disabling the CRC4 mode (TR.E1RCR1.3 =
0). This counter is useful for determining the amount of time the framer has been searching for synchronization at
the CRC4 level. ITU G.706 suggests that if synchronization at the CRC4 level cannot be obtained within 400ms,
then the search should be abandoned and proper action taken. The CRC4 sync counter rolls over. CSC0 is the
LSB of the 6-bit counter. (Note: The bit next to LSB is not accessible. CSC1 is omitted to allow resolution to
>400ms using 5 bits.) These are read-only, non-latched, real-time bits. It is not necessary to precede the read of
these bits with a write.
Bit 2: FAS Sync Active (FASSA). Set while the synchronizer is searching for alignment at the FAS level. This is a
read-only, non-latched, real-time bit. It is not necessary to precede the read of this bit with a write.
Bit 1: CAS MF Sync Active (CASSA). Set while the synchronizer is searching for the CAS MF alignment word.
This is a read-only, non-latched, real-time bit. It is not necessary to precede the read of this bit with a write.
Bit 0: CRC4 MF Sync Active (CRC4SA). Set while the synchronizer is searching for the CRC4 MF alignment
word. This is a read-only, non-latched, real-time bit. It is not necessary to precede the read of this bit with a write.
Register Name:
Register Description:
Register Address:
Bit #
Name
Default
7
RHR
0
TR.H1RC, TR.H2RC
HDLC #1 Receive Control
HDLC #2 Receive Control
31h, 32h
6
RHMS
0
5
—
0
4
—
0
3
—
0
2
—
0
1
—
0
0
RSFD
0
Bit 7: Receive HDLC Reset (RHR). Resets the receive HDLC controller and flushes the receive FIFO. Must be
cleared and set again for a subsequent reset.
0 = normal operation
1 = reset receive HDLC controller and flush the receive FIFO
Bit 6: Receive HDLC Mapping Select (RHMS)
0 = receive HDLC assigned to channels
1 = receive HDLC assigned to FDL (T1 mode), Sa bits (E1 mode)
Bits 5 to 1: Unused, must be set to 0 or proper operation.
Bit 0: Receive SS7 Fill-In Signal Unit Delete (RSFD)
0 = normal operation; all FISUs are stored in the receive FIFO and reported to the host.
1 = When a consecutive FISU having the same BSN the previous FISU is detected, it is deleted without
host intervention.
226 of 333
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
Register Name:
Register Description:
Register Address:
TR.E1RCR1
E1 Receive Control Register 1
33h
Bit #
Name
Default
6
RSIGM
0
7
RSERC
0
5
RHDB3
0
4
RG802
0
3
RCRC4
0
2
FRC
0
1
SYNCE
0
0
RESYNC
0
Bit 7: RSERO Control (RSERC)
0 = allow RSERO to output data as received under all conditions
1 = force RSERO to 1 under loss-of-frame alignment conditions
Bit 6: Receive Signaling Mode Select (RSIGM)
0 = CAS signaling mode
1 = CCS signaling mode
Bit 5: Receive HDB3 Enable (RHDB3)
0 = HDB3 disabled
1 = HDB3 enabled
Bit 4: Receive G.802 Enable (RG802). See Section 10.10 for details.
0 = do not force RCHBLK high during bit 1 of time slot 26
1 = force RCHBLK high during bit 1 of time slot 26
Bit 3: Receive CRC4 Enable (RCRC4)
0 = CRC4 disabled
1 = CRC4 enabled
Bit 2: Frame Resync Criteria (FRC)
0 = resync if FAS received in error three consecutive times
1 = resync if FAS or bit 2 of non-FAS is received in error three consecutive times
Bit 1: Sync Enable (SYNCE)
0 = auto resync enabled
1 = auto resync disabled
Bit 0: Resync (RESYNC). When toggled from low to high, a resync is initiated. Must be cleared and set again for a
subsequent resync.
Register Name:
Register Description:
Register Address:
Bit #
Name
Default
7
—
0
TR.E1RCR2
E1 Receive Control Register 2
34h
6
—
0
5
—
0
4
—
0
3
—
0
2
—
0
1
—
0
0
RCLA
0
Bit 0: Receive Carrier-Loss (RCL) Alternate Criteria (RCLA). Defines the criteria for a receive carrier-loss
condition for both the framer and LIU.
0 = RCL declared upon 255 consecutive 0s (125µs)
1 = RCL declared upon 2048 consecutive 0s (1ms)
227 of 333
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
Register Name:
Register Description:
Register Address:
Bit #
Name
Default
7
TFPT
0
TR.E1TCR1
E1 Transmit Control Register 1
35h
6
T16S
0
5
TUA1
0
4
TSiS
0
3
TSA1
0
2
THDB3
0
1
TG802
0
0
TCRC4
0
Bit 7: Transmit Time Slot 0 Pass-Through (TFPT)
0 = FAS bits/Sa bits/remote alarm sourced internally from the TR.TAF and TR.TNAF registers
1 = FAS bits/Sa bits/remote alarm sourced from TSERI
Bit 6: Transmit Time Slot 16 Data Select (T16S). See Section 10.10 for details.
0 = time slot 16 determined by the TR.SSIEx registers and the THSCS function in the TR.PCPR register
1 = source time slot 16 from TR.TS1 to TR.TS16 registers
Bit 5: Transmit Unframed All Ones (TUA1)
0 = transmit data normally
1 = transmit an unframed all-ones code at TPOSO and TNEGO
Bit 4: Transmit International Bit Select (TSiS)
0 = sample Si bits at TSERI pin
1 = source Si bits from TR.TAF and TR.TNAF registers (in this mode, TR.E1TCR1.7 must be set to 0)
Bit 3: Transmit Signaling All Ones (TSA1)
0 = normal operation
1 = force time slot 16 in every frame to all ones
Bit 2: Transmit HDB3 Enable (THDB3)
0 = HDB3 disabled
1 = HDB3 enabled
Bit 1: Transmit G.802 Enable (TG802). See Section 10.10 for details.
0 = do not force TCHBLK high during bit 1 of time slot 26
1 = force TCHBLK high during bit 1 of time slot 26
Bit 0: Transmit CRC4 Enable (TCRC4)
0 = CRC4 disabled
1 = CRC4 enabled
228 of 333
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
Register Name:
Register Description:
Register Address:
Bit #
Name
Default
7
—
0
TR.E1TCR2
E1 Transmit Control Register 2
36h
6
—
0
5
—
0
4
—
0
3
—
0
2
AEBE
0
1
AAIS
0
0
ARA
0
3
RBR
0
2
RBF1
0
1
RBF0
0
0
SBOC
0
Bit 2: Automatic E-Bit Enable (AEBE)
0 = E-bits not automatically set in the transmit direction
1 = E-bits automatically set in the transmit direction
Bit 1: Automatic AIS Generation (AAIS)
0 = disabled
1 = enabled
Bit 0: Automatic Remote Alarm Generation (ARA)
0 = disabled
1 = enabled
Register Name:
Register Description:
Register Address:
Bit #
Name
Default
7
—
0
TR.BOCC
BOC Control Register
37h
6
—
0
5
—
0
4
RBOCE
0
Bit 4: Receive BOC Enable (RBOCE). Enables the receive BOC function. The TR.RFDL register reports the
received BOC code and two information bits when this bit is set.
0 = receive BOC function disabled
1 = receive BOC function enabled; the TR.RFDL register reports BOC messages and information
Bit 3: Receive BOC Reset (RBR). A 0-to-1 transition resets the BOC circuitry. Must be cleared and set again for a
subsequent reset.
Bits 2 and 1: Receive BOC Filter Bits (RBF1, RBF0). The BOC filter sets the number of consecutive patterns
that must be received without error prior to an indication of a valid message.
RBF1
RBF0
0
0
1
1
0
1
0
1
Consecutive BOC Codes for
Valid Sequence Identification
None
3
5
7
Bit 0: Send BOC (SBOC). Set = 1 to transmit the BOC code placed in bits 0 to 5 of the TR.TFDL register.
229 of 333
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
Register Name:
Register Description:
Register Address:
(MSB)
CH8
CH16
CH24
CH7
CH15
CH23
TR.RSINFO1, TR.RSINFO2, TR.RSINFO3, TR.RSINFO4
Receive Signaling Change-of-State Information
38h, 39h, 3Ah, 3Bh
CH6
CH14
CH22
CH30
CH5
CH13
CH21
CH29
CH4
CH12
CH20
CH28
CH3
CH11
CH19
CH27
CH2
CH10
CH18
CH26
(LSB)
CH1
CH9
CH17
CH25
RSINFO1
RSINFO2
RSINFO3
RSINFO4
When a channel’s signaling data changes state, the respective bit in registers TR.RSINFO1–4 is set. An interrupt is
generated if the channel was also enabled as an interrupt source by setting the appropriate bit in TR.RSCSE1–4.
The bit remains set until read.
Register Name:
Register Description:
Register Address:
(MSB)
CH8
CH16
CH24
CH7
CH15
CH23
TR.RSCSE1, TR.RSCSE2, TR.RSCSE3, TR.RSCSE4
Receive Signaling Change-of-State Interrupt Enable
3Ch, 3Dh, 3Eh, 3Fh
CH6
CH14
CH22
CH30
CH5
CH13
CH21
CH29
CH4
CH12
CH20
CH28
CH3
CH11
CH19
CH27
CH2
CH10
CH18
CH26
(LSB)
CH1
CH9
CH17
CH25
RSCSE1
RSCSE2
RSCSE3
RSCSE4
Setting any of the CH1–CH30 bits in the TR.RSCSE1– TR.RSCSE4 registers causes an interrupt when that
channel’s signaling data changes state.
230 of 333
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
Register Name:
Register Description:
Register Address:
Bit #
Name
Default
7
GRSRE
0
TR.SIGCR
Signaling Control Register
40h
6
—
0
5
—
0
4
RFE
0
3
RFF
0
2
RCCS
0
1
TCCS
0
0
FRSAO
0
Bit 7: Global Receive Signaling Reinsertion Enable (GRSRE). This bit allows the user to reinsert all signaling
channels without programming all channels through the per-channel function.
0 = do not reinsert all signaling
1 = reinsert all signaling
Bit 4: Receive Freeze Enable (RFE). See Section 10.9.2.3 for details.
0 = no freezing of receive signaling data occurs
1 = allow freezing of receive signaling data at RSIG (and RSERO if receive signaling reinsertion is
enabled)
Bit 3: Receive Force Freeze (RFF). Freezes receive-side signaling at RSIG (and RSERO if receive signaling
reinsertion is enabled); overrides receive freeze enable (RFE). See Section 10.9.2.3 for details.
0 = do not force a freeze event
1 = force a freeze event
Bit 2: Receive Time Slot Control for CAS Signaling (RCCS). Controls the order that signaling is placed into the
receive signaling registers. This bit should be set = 0 in T1 mode.
0 = signaling data is CAS format
1 = signaling data is CCS format
Bit 1: Transmit Time Slot Control for CAS Signaling (TCCS). Controls the order that signaling is transmitted
from the transmit signaling registers. This bit should be set = 0 in T1 mode.
0 = signaling data is CAS format
1 = signaling data is CCS format
Bit 0: Force Receive Signaling All Ones (FRSAO). In T1 mode, this bit forces all signaling data at the RSIG and
RSERO pin to all ones. This bit has no effect in E1 mode.
0 = normal signaling data at RSIG and RSERO
1 = force signaling data at RSIG and RSERO to all ones
231 of 333
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
Register Name:
Register Description:
Register Address:
Bit #
Name
Default
7
—
0
TR.ERCNT
Error-Counter Configuration Register
41h
6
MECU
0
5
ECUS
0
4
EAMS
0
3
VCRFS
0
2
FSBE
0
1
MOSCRF
0
0
LCVCRF
0
Bit 6: Manual Error-Counter Update (MECU). When enabled by TR.ERCNT.4, the changing of this bit from a 0 to
a 1 allows the next clock cycle to load the error-counter registers with the latest counts and reset the counters. The
user must wait a minimum of 1.5 RCLKO clock periods before reading the error count registers to allow for proper
update.
Bit 5: Error-Counter Update Select (ECUS)
T1 Mode:
0 = update error counters once a second
1 = update error counters every 42ms (333 frames)
E1 Mode:
0 = update error counters once a second
1 = update error counters every 62.5ms (500 frames)
Bit 4: Error-Accumulation Mode Select (EAMS)
0 = TR.ERCNT.5 determines accumulation time
1 = TR.ERCNT.6 determines accumulation time
Bit 3: E1 Line-Code Violation Count Register Function Select (VCRFS)
0 = count bipolar violations (BPVs)
1 = count code violations (CVs)
Bit 2: PCVCR Fs-Bit Error-Report Enable (FSBE)
0 = do not report bit errors in Fs-bit position; only Ft-bit position
1 = report bit errors in Fs-bit position as well as Ft-bit position
Bit 1: Multiframe Out-of-Sync Count Register Function Select (MOSCRF)
0 = count errors in the framing bit position
1 = count the number of multiframes out-of-sync
Bit 0: T1 Line-Code Violation Count Register Function Select (LCVCRF)
0 = do not count excessive 0s
1 = count excessive 0s
Register Name:
Register Description:
Register Address:
TR.LCVCR1
Line-Code Violation Count Register 1
42h
Bit #
Name
Default
6
LCVC14
0
7
LCVC15
0
5
LCVC13
0
4
LCVC12
0
3
LCVC11
0
2
LCVC10
0
1
LCVC9
0
0
LCCV8
0
Bits 7 to 0: Line-Code Violation Counter Bits 15 to 8 (LCVC15 to LCVC8). LCV15 is the MSB of the 16-bit code
violation count.
232 of 333
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
Register Name:
Register Description:
Register Address:
TR.LCVCR2
Line-Code Violation Count Register 2
43h
Bit #
Name
Default
6
LCVC6
0
7
LCVC7
0
5
LCVC5
0
4
LCVC4
0
3
LCVC3
0
2
LCVC2
0
1
LCVC1
0
0
LCVC0
0
Bits 7 to 0: Line-Code Violation Counter Bits 7 to 0 (LCVC7 to LCVC0). LCV0 is the LSB of the 16-bit code
violation count.
Register Name:
Register Description:
Register Address:
TR.PCVCR1
Path Code Violation Count Register 1
44h
Bit #
Name
Default
6
PCVC14
0
7
PCVC15
0
5
PCVC13
0
4
PCVC12
0
3
PCVC11
0
2
PCVC10
0
1
PCVC9
0
0
PCVC8
0
Bits 7 to 0: Path Code Violation Counter Bits 15 to 8 (PCVC15 to PCVC8). PCVC15 is the MSB of the 16-bit
path code violation count.
Register Name:
Register Description:
Register Address:
TR.PCVCR2
Path Code Violation Count Register 2
45h
Bit #
Name
Default
6
PCVC6
0
7
PCVC7
0
5
PCVC5
0
4
PCVC4
0
3
PCVC3
0
2
PCVC2
0
1
PCVC1
0
0
PCVC0
0
Bits 7 to 0: Path Code Violation Counter Bits 7 to 0 (PCVC7 to PCVC0). PCVC0 is the LSB of the 16-bit path
code violation count.
Register Name:
Register Description:
Register Address:
TR.FOSCR1
Frames Out-of-Sync Count Register 1
46h
Bit #
Name
Default
6
FOS14
0
7
FOS15
0
5
FOS13
0
4
FOS12
0
3
FOS11
0
2
FOS10
0
1
FOS9
0
0
FOS8
0
Bits 7 to 0: Frames Out-of-Sync Counter Bits 15 to 8 (FOS15 to FOS8). FOS15 is the MSB of the 16-bit frames
out-of-sync count.
233 of 333
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
Register Name:
Register Description:
Register Address:
Bit #
Name
Default
7
FOS7
0
TR.FOSCR2
Frames Out-of-Sync Count Register 2
47h
6
FOS6
0
5
FOS5
0
4
FOS4
0
3
FOS3
0
2
FOS2
0
1
FOS1
0
0
FOS0
0
Bits 7 to 0: Frames Out-of-Sync Counter Bits 7 to 0 (FOS7 to FOS0). FOS0 is the LSB of the 16-bit frames outof-sync count.
Register Name:
Register Description:
Register Address:
Bit #
Name
Default
7
EB15
0
TR.EBCR1
E-Bit Count Register 1
48h
6
EB14
0
5
EB13
0
4
EB12
0
3
EB11
0
2
EB10
0
1
EB9
0
0
EB8
0
Bits 7 to 0: E-Bit Counter Bits 15 to 8 (EB15 to EB8). EB15 is the MSB of the 16-bit E-bit count.
Register Name:
Register Description:
Register Address:
Bit #
Name
Default
7
EB7
0
TR.EBCR2
E-Bit Count Register 2
49h
6
EB6
0
5
EB5
0
4
EB4
0
3
EB3
0
2
EB2
0
Bits 7 to 0: E-Bit Counter Bits 7 to 0 (EB7 to EB0). EB0 is the LSB of the 16-bit E-bit count.
234 of 333
1
EB1
0
0
EB0
0
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
Register Name:
Register Description:
Register Address:
Bit #
Name
Default
7
—
0
TR.LBCR
Loopback Control Register
4Ah
6
—
0
5
—
0
4
LIUC
0
3
LLB
0
2
RLB
0
1
PLB
0
0
FLB
0
Bit 4: Line Interface Unit Mux Control (LIUC). This is a software version of the LIUC pin. When the LIUC pin is
connected high, the LIUC bit has control. When the LIUC pin is connected low, the framer and LIU are separated
and the LIUC bit has no effect.
0 = LIU internally connected to framer.
1 = LIU disconnected from framer. Use TPOSI/TNEGI/TDCLKI/RPOSI/RNEGI/RDCLKI pins
LIUC Pin
0
0
1
LIUC Bit
0
1
0
Condition
LIU and framer separated
LIU and framer separated
LIU and framer connected
1
1
LIU and framer separated
Bit 3: Local Loopback (LLB). When this bit is set to 1, data continues to be transmitted as normal through the
transmit side of the transceiver. Data being received at RTIP and RRING are replaced with the data being
transmitted. Data in this loopback passes through the jitter attenuator. See Figure 6-3 for more details.
Bit 2: Remote Loopback (RLB). When this bit is set to 1, data input by the RPOSI and RNEGI pins is transmitted
back to the TPOSO and TNEGO pins. Data continues to pass through the receive-side framer of the transceiver as
it would normally. Data from the transmit-side formatter is ignored. See Figure 6-3 for more details.
Bit 1: Payload Loopback (PLB). When set to 1, payload loopback is enabled and the following occurs:
1) Data is transmitted from the TPOSO and TNEGO pins synchronous with RCLKO instead of TCLKT.
2) All the receive side signals continue to operate normally.
3) Data at the TSERI, TDATA, and TSIG pins is ignored.
T1 Mode: Normally, this loopback is only enabled when ESF framing is being performed but can also be enabled in
D4 framing applications. The transceiver loops the 192 bits of payload data (with BPVs corrected) from the receive
section back to the transmit section. The FPS framing pattern, CRC6 calculation, and the FDL bits are not looped
back; they are reinserted by the transceiver.
E1 Mode: The transceiver loops the 248 bits of payload data (with BPVs corrected) from the receive section back
to the transmit section. The transmit section modifies the payload as if it was input at TSERI. The FAS word; Si,
Sa, and E bits; and CRC4 are not looped back; they are reinserted by the transceiver.
Bit 0: Framer Loopback (FLB). When this bit is set to 1, the transceiver loops data from the transmit side back to
the receive side. When FLB is enabled, the following occurs:
1) T1 Mode: An unframed all-ones code is transmitted at TPOSO and TNEGO.
E1 Mode: Normal data is transmitted at TPOSO and TNEGO.
2) Data at RPOSI and RNEGI is ignored.
3) All receive-side signals take on timing synchronous with TCLKT instead of RDCLKI.
Please note that it is not acceptable to have RCLKO connected to TCLKT during this loopback because this
causes an unstable condition.
235 of 333
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
Register Name:
Register Description:
Register Address:
Bit #
Name
Default
7
CH8
0
TR.PCLR1
Per-Channel Loopback Enable Register 1
4Bh
6
CH7
0
5
CH6
0
4
CH5
0
3
CH4
0
2
CH3
0
1
CH2
0
0
CH1
0
1
CH10
0
0
CH9
0
1
CH18
0
0
CH17
0
1
CH26
0
0
CH25
0
Bits 7 to 0: Per-Channel Loopback Enable for Channels 8 to 1 (CH8 to CH1)
0 = loopback disabled
1 = enable loopback; source data from the corresponding receive channel
Register Name:
Register Description:
Register Address:
Bit #
Name
Default
7
CH16
0
TR.PCLR2
Per-Channel Loopback Enable Register 2
4Ch
6
CH15
0
5
CH14
0
4
CH13
0
3
CH12
0
2
CH11
0
Bits 7 to 0: Per-Channel Loopback Enable for Channels 16 to 9 (CH16 to CH9)
0 = loopback disabled
1 = enable loopback; source data from the corresponding receive channel
Register Name:
Register Description:
Register Address:
Bit #
Name
Default
7
CH24
0
TR.PCLR3
Per-Channel Loopback Enable Register 3
4Dh
6
CH23
0
5
CH22
0
4
CH21
0
3
CH20
0
2
CH19
0
Bits 7 to 0: Per-Channel Loopback Enable for Channels 24 to 17 (CH24 to CH17)
0 = loopback disabled
1 = enable loopback; source data from the corresponding receive channel
Register Name:
Register Description:
Register Address:
Bit #
Name
Default
7
CH32
0
TR.PCLR4
Per-Channel Loopback Enable Register 4
4Eh
6
CH31
0
5
CH30
0
4
CH29
0
3
CH28
0
2
CH27
0
Bits 7 to 0: Per-Channel Loopback Enable for Channels 32 to 25 (CH32 to CH25)
0 = loopback disabled
1 = enable loopback; source data from the corresponding receive channel
236 of 333
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
Register Name:
Register Description:
Register Address:
Bit #
Name
Default
7
TESALGN
0
TR.ESCR
Elastic Store Control Register
4Fh
6
TESR
0
5
TESMDM
0
4
TESE
0
3
RESALGN
0
2
RESR
0
1
RESMDM
0
0
RESE
0
Bit 7: Transmit Elastic Store Align (TESALGN). Setting this bit from a 0 to a 1 forces the transmit elastic store’s
write/read pointers to a minimum separation of half a frame. No action is taken if the pointer separation is already
greater or equal to half a frame. If pointer separation is less than half a frame, the command is executed and the
data is disrupted. It should be toggled after TSYSCLK has been applied and is stable. It must be cleared and set
again for a subsequent align. See Section 10.12.3 for details.
Bit 6: Transmit Elastic Store Reset (TESR). Setting this bit from a 0 to a 1 forces the read and write pointers into
opposite frames, maximizing the delay through the transmit elastic store. Transmit data is lost during the reset. It
should be toggled after TSYSCLK has been applied and is stable. See Section 10.12.3 for details. Do not leave
this bit set HIGH.
Bit 5: Transmit Elastic Store Minimum-Delay Mode (TESMDM). See Section 10.12.3.1 for details.
0 = elastic stores operate at full two-frame depth
1 = elastic stores operate at 32-bit depth
Bit 4: Transmit Elastic Store Enable (TESE)
0 = elastic store is bypassed
1 = elastic store is enabled
Bit 3: Receive Elastic Store Align (RESALGN). Setting this bit from a 0 to a 1 forces the receive elastic store’s
write/read pointers to a minimum separation of half a frame. No action is taken if the pointer separation is already
greater or equal to half a frame. If pointer separation is less than half a frame, the command is executed and the
data is disrupted. It should be toggled after RSYSCLK has been applied and is stable. Must be cleared and set
again for a subsequent align. See Section 10.12.3 for details.
Bit 2: Receive Elastic Store Reset (RESR). Setting this bit from a 0 to a 1 forces the read and write pointers into
opposite frames, maximizing the delay through the receive elastic store. It should be toggled after RSYSCLK has
been applied and is stable. See Section 10.12.3 for details. Do not leave this bit set HIGH.
Bit 1: Receive Elastic Store Minimum-Delay Mode (RESMDM). See Section 10.12.3.1 for details.
0 = elastic stores operate at full two-frame depth
1 = elastic stores operate at 32-bit depth
Bit 0: Receive Elastic Store Enable (RESE)
0 = elastic store is bypassed
1 = elastic store is enabled
237 of 333
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
Register Name:
Register Description:
Register Address:
(MSB)
0
CH2-A
CH4-A
CH6-A
CH8-A
CH10-A
CH12-A
CH14-A
CH16-A
CH18-A
CH20-A
CH22-A
CH24-A
CH26-A
CH28-A
CH30-A
0
CH2-B
CH4-B
CH6-B
CH8-B
CH10-B
CH12-B
CH14-B
CH16-B
CH18-B
CH20-B
CH22-B
CH24-B
CH26-B
CH28-B
CH30-B
Register Name:
Register Description:
Register Address:
(MSB)
1
9
17
25
33
41
49
57
65
73
81
89
97
105
113
121
2
10
18
26
34
42
50
58
66
74
82
90
98
106
114
122
TR.TS1 to TR.TS16
Transmit Signaling Registers (E1 Mode, CAS Format)
50h to 5Fh
0
CH2-C
CH4-C
CH6-C
CH8-C
CH10-C
CH12-C
CH14-C
CH16-C
CH18-C
CH20-C
CH22-C
CH24-C
CH26-C
CH28-C
CH30-C
0
CH2-D
CH4-D
CH6-D
CH8-D
CH10-D
CH12-D
CH14-D
CH16-D
CH18-D
CH20-D
CH22-D
CH24-D
CH26-D
CH28-D
CH30-D
X
CH1-A
CH3-A
CH5-A
CH7-A
CH9-A
CH11-A
CH13-A
CH15-A
CH17-A
CH19-A
CH21-A
CH23-A
CH25-A
CH27-A
CH29-A
Y
CH1-B
CH3-B
CH5-B
CH7-B
CH9-B
CH11-B
CH13-B
CH15-B
CH17-B
CH19-B
CH21-B
CH23-B
CH25-B
CH27-B
CH29-B
X
CH1-C
CH3-C
CH5-C
CH7-C
CH9-C
CH11-C
CH13-C
CH15-C
CH17-C
CH19-C
CH21-C
CH23-C
CH25-C
CH27-C
CH29-C
(LSB)
X
CH1-D
CH3-D
CH5-D
CH7-D
CH9-D
CH11-D
CH13-D
CH15-D
CH17-D
CH19-D
CH21-D
CH23-D
CH25-D
CH27-D
CH29-D
TS1
TS2
TS3
TS4
TS5
TS6
TS7
TS8
TS9
TS10
TS11
TS12
TS13
TS14
TS15
TS16
TR.TS1 to TR.TS16
Transmit Signaling Registers (E1 Mode, CCS Format)
50h to 5Fh
3
11
19
27
35
43
51
59
67
75
83
91
99
107
115
123
4
12
20
28
36
44
52
60
68
76
84
92
100
108
116
124
5
13
21
29
37
45
53
61
69
77
85
93
101
109
117
125
6
14
22
30
38
46
54
62
70
78
86
94
102
110
118
126
238 of 333
7
15
23
31
39
47
55
63
71
79
87
95
103
111
119
127
(LSB)
8
16
24
32
40
48
56
64
72
80
88
96
104
112
120
128
TS1
TS2
TS3
TS4
TS5
TS6
TS7
TS8
TS9
TS10
TS11
TS12
TS13
TS14
TS15
TS16
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
Register Name:
Register Description:
Register Address:
(MSB)
CH2-A
CH4-A
CH6-A
CH8-A
CH10-A
CH12-A
CH14-A
CH16-A
CH18-A
CH20-A
CH22-A
CH24-A
CH2-B
CH4-B
CH6-B
CH8-B
CH10-B
CH12-B
CH14-B
CH16-B
CH18-B
CH20-B
CH22-B
CH24-B
Register Name:
Register Description:
Register Address:
(MSB)
CH2-A
CH4-A
CH6-A
CH8-A
CH10-A
CH12-A
CH14-A
CH16-A
CH18-A
CH20-A
CH22-A
CH24-A
CH2-B
CH4-B
CH6-B
CH8-B
CH10-B
CH12-B
CH14-B
CH16-B
CH18-B
CH20-B
CH22-B
CH24-B
TR.TS1 to TR.TS12
Transmit Signaling Registers (T1 Mode, ESF Format)
50h to 5Bh
CH2-C
CH4-C
CH6-C
CH8-C
CH10-C
CH12-C
CH14-C
CH16-C
CH18-C
CH20-C
CH22-C
CH24-C
CH2-D
CH4-D
CH6-D
CH8-D
CH10-D
CH12-D
CH14-D
CH16-D
CH18-D
CH20-D
CH22-D
CH24-D
CH1-A
CH3-A
CH5-A
CH7-A
CH9-A
CH11-A
CH13-A
CH15-A
CH17-A
CH19-A
CH21-A
CH23-A
CH1-B
CH3-B
CH5-B
CH7-B
CH9-B
CH11-B
CH13-B
CH15-B
CH17-B
CH19-B
CH21-B
CH23-B
CH1-C
CH3-C
CH5-C
CH7-C
CH9-C
CH11-C
CH13-C
CH15-C
CH17-C
CH19-C
CH21-C
CH23-C
(LSB)
CH1-D
CH3-D
CH5-D
CH7-D
CH9-D
CH11-D
CH13-D
CH15-D
CH17-D
CH19-D
CH21-D
CH23-D
TS1
TS2
TS3
TS4
TS5
TS6
TS7
TS8
TS9
TS10
TS11
TS12
TR.TS1 to TR.TS12
Transmit Signaling Registers (T1 Mode, D4 Format)
50h to 5Bh
CH2-A
CH4-A
CH6-A
CH8-A
CH10-A
CH12-A
CH14-A
CH16-A
CH18-A
CH20-A
CH22-A
CH24-A
CH2-B
CH4-B
CH6-B
CH8-B
CH10-B
CH12-B
CH14-B
CH16-B
CH18-B
CH20-B
CH22-B
CH24-B
CH1-A
CH3-A
CH5-A
CH7-A
CH9-A
CH11-A
CH13-A
CH15-A
CH17-A
CH19-A
CH21-A
CH23-A
CH1-B
CH3-B
CH5-B
CH7-B
CH9-B
CH11-B
CH13-B
CH15-B
CH17-B
CH19-B
CH21-B
CH23-B
CH1-A
CH3-A
CH5-A
CH7-A
CH9-A
CH11-A
CH13-A
CH15-A
CH17-A
CH19-A
CH21-A
CH23-A
(LSB)
CH1-B
CH3-B
CH5-B
CH7-B
CH9-B
CH11-B
CH13-B
CH15-B
CH17-B
CH19-B
CH21-B
CH23-B
TS1
TS2
TS3
TS4
TS5
TS6
TS7
TS8
TS9
TS10
TS11
TS12
Note: In D4 format, TR.TS1–TR.TS12 contain signaling data for two frames. Bold type indicates data for second
frame.
239 of 333
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
Register Name:
Register Description:
Register Address:
(MSB)
CH2-A
CH4-A
CH6-A
CH8-A
CH10-A
CH12-A
CH14-A
CH16-A
CH18-A
CH20-A
CH22-A
CH24-A
CH2-B
CH4-B
CH6-B
CH8-B
CH10-B
CH12-B
CH14-B
CH16-B
CH18-B
CH20-B
CH22-B
CH24-B
Register Name:
Register Description:
Register Address:
(MSB)
CH2-A
CH4-A
CH6-A
CH8-A
CH10-A
CH12-A
CH14-A
CH16-A
CH18-A
CH20-A
CH22-A
CH24-A
CH2-B
CH4-B
CH6-B
CH8-B
CH10-B
CH12-B
CH14-B
CH16-B
CH18-B
CH20-B
CH22-B
CH24-B
TR.RS1 to TR.RS12
Receive Signaling Registers (T1 Mode, ESF Format)
60h to 6Bh
CH2-C
CH4-C
CH6-C
CH8-C
CH10-C
CH12-C
CH14-C
CH16-C
CH18-C
CH20-C
CH22-C
CH24-C
CH2-D
CH4-D
CH6-D
CH8-D
CH10-D
CH12-D
CH14-D
CH16-D
CH18-D
CH20-D
CH22-D
CH24-D
CH1-A
CH3-A
CH5-A
CH7-A
CH9-A
CH11-A
CH13-A
CH15-A
CH17-A
CH19-A
CH21-A
CH23-A
CH1-B
CH3-B
CH5-B
CH7-B
CH9-B
CH11-B
CH13-B
CH15-B
CH17-B
CH19-B
CH21-B
CH23-B
CH1-C
CH3-C
CH5-C
CH7-C
CH9-C
CH11-C
CH13-C
CH15-C
CH17-C
CH19-C
CH21-C
CH23-C
(LSB)
CH1-D
CH3-D
CH5-D
CH7-D
CH9-D
CH11-D
CH13-D
CH15-D
CH17-D
CH19-D
CH21-D
CH23-D
RS1
RS2
RS3
RS4
RS5
RS6
RS7
RS8
RS9
RS10
RS11
RS12
TR.RS1 to TR.RS12
Receive Signaling Registers (T1 Mode, D4 Format)
60h to 6Bh
CH2-A
CH4-A
CH6-A
CH8-A
CH10-A
CH12-A
CH14-A
CH16-A
CH18-A
CH20-A
CH22-A
CH24-A
CH2-B
CH4-B
CH6-B
CH8-B
CH10-B
CH12-B
CH14-B
CH16-B
CH18-B
CH20-B
CH22-B
CH24-B
CH1-A
CH3-A
CH5-A
CH7-A
CH9-A
CH11-A
CH13-A
CH15-A
CH17-A
CH19-A
CH21-A
CH23-A
CH1-B
CH3-B
CH5-B
CH7-B
CH9-B
CH11-B
CH13-B
CH15-B
CH17-B
CH19-B
CH21-B
CH23-B
CH1-A
CH3-A
CH5-A
CH7-A
CH9-A
CH11-A
CH13-A
CH15-A
CH17-A
CH19-A
CH21-A
CH23-A
(LSB)
CH1-B
CH3-B
CH5-B
CH7-B
CH9-B
CH11-B
CH13-B
CH15-B
CH17-B
CH19-B
CH21-B
CH23-B
RS1
RS2
RS3
RS4
RS5
RS6
RS7
RS8
RS9
RS10
RS11
RS12
Note: In D4 format, TR.TS1–TR.TS12 contain signaling data for two frames. Bold type indicates data for second
frame.
240 of 333
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
Register Name:
Register Description:
Register Address:
(MSB)
0
CH2-A
CH4-A
CH6-A
CH8-A
CH10-A
CH12-A
CH14-A
CH16-A
CH18-A
CH20-A
CH22-A
CH24-A
CH26-A
CH28-A
CH30-A
0
CH2-B
CH4-B
CH6-B
CH8-B
CH10-B
CH12-B
CH14-B
CH16-B
CH18-B
CH20-B
CH22-B
CH24-B
CH26-B
CH28-B
CH30-B
Register Name:
Register Description:
Register Address:
(MSB)
1
9
17
25
33
41
49
57
65
73
81
89
97
105
113
121
2
10
18
26
34
42
50
58
66
74
82
90
98
106
114
122
TR.RS1 to TR.RS16
Receive Signaling Registers (E1 Mode, CAS Format)
60h to 6Fh
0
CH2-C
CH4-C
CH6-C
CH8-C
CH10-C
CH12-C
CH14-C
CH16-C
CH18-C
CH20-C
CH22-C
CH24-C
CH26-C
CH28-C
CH30-C
0
CH2-D
CH4-D
CH6-D
CH8-D
CH10-D
CH12-D
CH14-D
CH16-D
CH18-D
CH20-D
CH22-D
CH24-D
CH26-D
CH28-D
CH30-D
X
CH1-A
CH3-A
CH5-A
CH7-A
CH9-A
CH11-A
CH13-A
CH15-A
CH17-A
CH19-A
CH21-A
CH23-A
CH25-A
CH27-A
CH29-A
Y
CH1-B
CH3-B
CH5-B
CH7-B
CH9-B
CH11-B
CH13-B
CH15-B
CH17-B
CH19-B
CH21-B
CH23-B
CH25-B
CH27-B
CH29-B
X
CH1-C
CH3-C
CH5-C
CH7-C
CH9-C
CH11-C
CH13-C
CH15-C
CH17-C
CH19-C
CH21-C
CH23-C
CH25-C
CH27-C
CH29-C
(LSB)
X
CH1-D
CH3-D
CH5-D
CH7-D
CH9-D
CH11-D
CH13-D
CH15-D
CH17-D
CH19-D
CH21-D
CH23-D
CH25-D
CH27-D
CH29-D
RS1
RS2
RS3
RS4
RS5
RS6
RS7
RS8
RS9
RS10
RS11
RS12
RS13
RS14
RS15
RS16
TR.RS1 to TR.RS16
Receive Signaling Registers (E1 Mode, CCS Format)
60h to 6Fh
3
11
19
27
35
43
51
59
67
75
83
91
99
107
115
123
4
12
20
28
36
44
52
60
68
76
84
92
100
108
116
124
5
13
21
29
37
45
53
61
69
77
85
93
101
109
117
125
6
14
22
30
38
46
54
62
70
78
86
94
102
110
118
126
241 of 333
7
15
23
31
39
47
55
63
71
79
87
95
103
111
119
127
(LSB)
8
16
24
32
40
48
56
64
72
80
88
96
104
112
120
128
RS1
RS2
RS3
RS4
RS5
RS6
RS7
RS8
RS9
RS10
RS11
RS12
RS13
RS14
RS15
RS16
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
Register Name:
Register Description:
Register Address:
TR.CCR1
Common Control Register 1
70h
Bit #
Name
Default
6
CRC4R
0
7
MCLKS
0
5
SIE
0
4
ODM
0
3
DICAI
0
2
TCSS1
0
1
TCSS0
0
0
RLOSF
0
Bit 7: MCLK Source (MCLKS). Selects the source of MCLK.
0 = MCLK is source from the MCLK pin
1 = MCLK is source from the TSYSCLK pin
Bit 6: CRC-4 Recalculate (CRC4R)
0 = transmit CRC-4 generation and insertion operates in normal mode
1 = transmit CRC-4 generation operates according to G.706 intermediate path recalculation method
Bit 5: Signaling Integration Enable (SIE)
0 = signaling changes of state reported on any change in selected channels
1 = signaling must be stable for three multiframes in order for a change of state to be reported
Bit 4: Output Data Mode (ODM)
0 = pulses at TPOSO and TNEGO are one full TCLKO period wide
1 = pulses at TPOSO and TNEGO are one-half TCLKO period wide
Bit 3: Disable Idle Code Auto Increment (DICAI). Selects/deselects the auto-increment feature for the transmit
and receive idle code array address register. See Section 10.10.
0 = addresses in TR.IAAR register automatically increment on every read/write operation to the TR.PCICR
register
1 = addresses in TR.IAAR register do not automatically increment
Bit 2: Transmit Clock Source Select Bit 0 (TCSS1)
TCSS1
TCSS0
0
0
0
1
1
0
1
1
Transmit Clock Source
The TCLKT pin is always the source of transmit clock.
Switch to the clock present at RCLKO when the signal at the TCLKT pin
fails to transition after 1 channel time.
Use the scaled signal present at MCLK as the transmit clock. The
TCLKT pin is ignored.
Use the signal present at RCLKO as the transmit clock. The TCLKT pin
is ignored.
Bit 1: Transmit Clock Source Select Bit 0 (TCSS0)
Bit 0: Function of the RLOS/LOTC Output (RLOSF)
0 = receive loss of sync (RLOS)
1 = loss-of-transmit clock (LOTC)
242 of 333
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
Register Name:
Register Description:
Register Address:
Bit #
Name
Default
TR.CCR2
Common Control Register 2
71h
7
6
5
4
3
0
2
BPCS1
0
1
BPCS0
0
0
BPEN
0
0
0
0
0
3
TDATFMT
0
2
TGPCKEN
0
1
RDATFMT
0
0
RGPCKEN
0
Bits 2 and 1: Backplane Clock Selects (BPCS1 and BPCS0)
BPCS1
BPCS0
BPCLK Frequency (MHz)
0
0
1
1
0
1
0
1
16.384
8.192
4.096
2.048
Bit 0: Backplane Clock Enable (BPEN)
0 = disable BPCLK pin (pin held at logic 0)
1 = enable BPCLK pin
Register Name:
Register Description:
Register Address:
TR.CCR3
Common Control Register 3
72h
Bit #
Name
Default
6
INTDIS
0
7
TMSS
0
5
—
0
4
—0
Bit 7: Transmit Multiframe Sync Source (TMSS). Should be set = 0 only when transmit hardware signaling is
enabled.
0 = elastic store is source of multiframe sync
1 = framer or TSYNC pin is source of multiframe sync
Bit 6: Interrupt Disable (INTDIS). This bit is convenient for disabling interrupts without altering the various
interrupt mask register settings.
0 = interrupts are enabled according to the various mask register settings
1 = interrupts are disabled regardless of the mask register settings
Bit 3: Transmit Channel-Data Format (TDATFMT)
0 = 64kbps (data contained in all 8 bits)
1 = 56kbps (data contained in seven out of the 8 bits)
Bit 2: Transmit Gapped-Clock Enable (TGPCKEN)
0 = TCHCLK functions normally
1 = enable gapped bit-clock output on TCHCLK
Bit 1: Receive Channel-Data Format (RDATFMT)
0 = 64kbps (data contained in all 8 bits)
1 = 56kbps (data contained in seven out of the 8 bits)
Bit 0: Receive Gapped-Clock Enable (RGPCKEN)
0 = RCHCLK functions normally
1 = enable gapped bit-clock output on RCHCLK
243 of 333
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
Register Name:
Register Description:
Register Address:
Bit #
Name
Default
7
RLT3
0
TR.CCR4
Common Control Register 4
73h
6
RLT2
0
5
RLT1
0
4
RLT0
0
3
—
0
2
—
0
1
—
0
0
—
0
2
TCM2
0
1
TCM1
0
0
TCM0
0
Bits 7 to 4: Receive Level Threshold Bits (RLT3 to RLT0)
RLT3
0
0
0
0
0
0
0
0
1
1
1
1
1
1
1
1
RLT2
0
0
0
0
1
1
1
1
0
0
0
0
1
1
1
1
Register Name:
Register Description:
Register Address:
Bit #
Name
Default
7
—
0
RLT1
0
0
1
1
0
0
1
1
0
0
1
1
0
0
1
1
RLT0
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
Receive Level (dB)
Greater than -2.5
-2.5
-5.0
-7.5
-10.0
-12.5
-15.0
-17.5
-20.0
-22.5
-25.0
-27.5
-30.0
-32.5
-35.0
Less than -37.5
TR.TDS0SEL
Transmit Channel Monitor Select
74h
6
—
0
5
—
0
4
TCM4
0
3
TCM3
0
Bits 4 to 0: Transmit Channel Monitor Bits (TCM4 to TCM0). TCM0 is the LSB of a 5-bit channel select that
determines which transmit channel data appear in the TR.TDS0M register.
244 of 333
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
Register Name:
Register Description:
Register Address:
Bit #
Name
Default
7
B1
0
TR.TDS0M
Transmit DS0 Monitor Register
75h
6
B2
0
5
B3
0
4
B4
0
3
B5
0
2
B6
0
1
B7
0
0
B8
0
Bits 7 to 0: Transmit DS0 Channel Bits (B1 to B8). Transmit channel data that has been selected by the transmit
channel monitor select register. B8 is the LSB of the DS0 channel (last bit to be transmitted).
Register Name:
Register Description:
Register Address:
Bit #
Name
Default
7
—
0
TR.RDS0SEL
Receive Channel Monitor Select
76h
6
—
0
5
—
0
4
RCM4
0
3
RCM3
0
2
RCM2
0
1
RCM1
0
0
RCM0
0
Bits 4 to 0: Receive Channel Monitor Bits (RCM4 to RCM0). RCM0 is the LSB of a 5-bit channel select that
determines which receive DS0 channel data appear in the TR.RDS0M register.
Register Name:
Register Description:
Register Address:
Bit #
Name
Default
7
B1
0
TR.RDS0M
Receive DS0 Monitor Register
77h
6
B2
0
5
B3
0
4
B4
0
3
B5
0
2
B6
0
1
B7
0
0
B8
0
Bits 7 to 0: Receive DS0 Channel Bits (B1 to B8). Receive channel data that has been selected by the receive
channel monitor select register. B8 is the LSB of the DS0 channel (last bit to be received).
245 of 333
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
Register Name:
Register Description:
Register Address:
Bit #
Name
Default
7
L2
0
TR.LIC1
Line Interface Control 1
78h
6
L1
0
5
L0
0
4
EGL
0
3
JAS
0
2
JABDS
0
1
DJA
0
0
TPD
0
Bits 7 to 5: Line Build-Out Select (L2 to L0). These bits select the output waveshape. See Table 12-10, Table
12-11, Table 12-12, and Table 12-13 for the correct register settings for specific applications. In E1 mode, when
using the internal termination, the user needs only to select 000 for 75Ω operation or 001 for 120Ω operation.
Using TT0 and TT1 of the LICR4 register, users can then select the proper internal source termination. Line buildouts 100 and 101 are provided for backward compatibility with older products only.
Bit 4: Receive Equalizer Gain Limit (EGL). This bit controls the sensitivity of the receive equalizer.
T1 Mode
0 = -36dB (long haul)
1 = -15dB (limited long haul)
E1 Mode
0 = -12dB (short haul)
1 = -43dB (long haul)
Bit 3: Jitter Attenuator Select (JAS)
0 = place the jitter attenuator on the receive side
1 = place the jitter attenuator on the transmit side
Bit 2: Jitter Attenuator Buffer Depth Select (JABDS)
0 = 128 bits
1 = 32 bits (use for delay-sensitive applications)
Bit 1: Disable Jitter Attenuator (DJA)
0 = jitter attenuator enabled
1 = jitter attenuator disabled
Bit 0: Transmit Power-Down (TPD) This bit along with the TPD pin and the LTS (TR.LBCR.7) bit controls the
transmit power-down function.
0 = powers down the transmitter and tri-states the TTIP and TRING pins
1 = normal transmitter operation
Table 12-9. TPD Control
TR.LBCR.
7
(LTS)
0
0
1
1
1
1
TPD
PIN
TR.LIC1.0
(TPD)
FUNCTION
X
X
0
0
1
1
0
1
0
1
0
1
Transmitter in power-down mode, TTIP and TRING tri-stated
Transmitter enabled
Transmitter in power-down mode, TTIP and TRING tri-stated
Transmitter enabled
Transmitter in power-down mode, TTIP and TRING tri-stated
Transmitter in power-down mode, TTIP and TRING tri-stated
246 of 333
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
Table 12-10. E1 Mode With Automatic Gain Control Mode Enabled (TLBC.6 = 0)
APPLICATION
75Ω Normal
120Ω Normal
75Ω with High Return Loss*
120Ω with High Return Loss*
LIC1.7
(L2)
0
0
1
1
LIC1.6
(L1)
0
0
0
0
LIC1.5
(L0)
0
1
0
1
PSA1
(F1h)
20h
20h
00h
20h
PSA2
(F2h)
08h
00h
00h
00h
RETURN
LOSS
N.M.**
N.M.
21dB
21dB
Rt (1)
0
0
6.2Ω
11.6Ω
Table 12-11. E1 Mode With Automatic Gain Control Mode Disabled (TLBC.6 = 1)
APPLICATION
75Ω Normal
120Ω Normal
75Ω with High Return Loss*
120Ω with High Return Loss*
LIC1.7
(L2)
0
0
1
1
LIC1.6
(L1)
0
0
0
0
LIC1.5
(L0)
0
1
0
1
PSA1
(F1h)
20h
00h
00h
00h
PSA2
(F2h)
08h
00h
00h
00h
RETURN
LOSS
N.M.
N.M.
21dB
21dB
Rt (1)
0
0
6.2Ω
11.6Ω
Table 12-12. T1 Mode With Automatic Gain Control Mode Enabled (TLBC.6 = 0)
APPLICATION
0dB CSU
DSX-1 (0 to 133 feet)/0dB CSU
DSX-1 (133 to 266 feet)
DSX-1 (266 to 399 feet)
DSX-1 (399 to 533 feet)
DSX-1 (533 to 655 feet)
-7.5dB CSU
-15dB CSU
-22.5dB CSU
LIC1.7
(L2)
0
0
0
0
0
1
1
1
1
LIC1.6
(L1)
0
0
0
1
1
0
0
1
1
LIC1.5
(L0)
0
0
1
0
1
0
1
0
1
PSA1
(F1h)
00h
00h
0Ah
0Ah
00h
0Ah
00h
00h
00h
PSA2
(F2h)
00h
00h
00h
00h
00h
00h
00h
00h
00h
RETURN
LOSS
N.M.
N.M.
N.M.
N.M.
N.M.
N.M.
N.M.
N.M.
N.M.
Rt (1)
0
0
0
0
0
0
0
0
0
Table 12-13. T1 Mode With Automatic Gain Control Mode Disabled (TLBC.6 = 1)
APPLICATION
0dB CSU
DSX-1 (0 to 133 feet)/0dB CSU
DSX-1 (133 to 266 feet)
DSX-1 (266 to 399 feet)
DSX-1 (399 to 533 feet)
DSX-1 (533 to 655 feet)
-7.5dB CSU
-15dB CSU
-22.5dB CSU
LIC1.7
(L2)
0
0
0
0
0
1
1
1
1
LIC1.6
(L1)
0
0
0
1
1
0
0
1
1
LIC1.5
(L0)
0
0
1
0
1
0
1
0
1
*TT0 and TT1 of the LIC4 register must be set to zero in this configuration.
**N.M. = not meaningful.
247 of 333
PSA1
(F1h)
00h
00h
00h
00h
00h
00h
00h
00h
00h
PSA2
(F2h)
00h
00h
00h
00h
00h
00h
00h
00h
00h
RETURN
LOSS
N.M.
N.M.
N.M.
N.M.
N.M.
N.M.
N.M.
N.M.
N.M.
Rt (1)
0
0
0
0
0
0
0
0
0
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
Register Name:
Register Description:
Register Address:
Bit #
Name
Default
7
—
0
TR.TLBC
Transmit Line Build-Out Control
7Dh
6
AGCE
0
5
GC5
0
4
GC4
0
3
GC3
0
2
GC2
0
1
GC1
0
0
GC0
0
Bit 6: Automatic Gain Control Enable (AGCE)
0 = use Transmit AGC, TR.TLBC bits 0–5 are “don’t care”
1 = do not use Transmit AGC, TR.TLBC bits 0–5 set nominal level
Bits 5 to 0: Gain Control Bits (GC5 to GC0). The GC0 through GC5 bits control the gain setting automatic gain
control is disabled. Use the tables below for setting the recommended values. The LB (line build-out) column refers
to the value in the L0–L2 bits in TR.LIC1 (Line Interface Control 1) register.
NETWORK MODE
T1, Impedance Match Off
T1, Impedance Match On
E1, Impedance Match Off
E1, Impedance Match On
LB
0
1
2
3
4
5
6
7
0
1
2
3
4
5
6
7
0
1
4
5
0
1
GC5
1
0
0
1
1
1
0
1
0
0
0
0
1
1
0
1
1
1
1
1
0
0
GC4
0
1
1
0
0
0
1
1
1
1
1
1
0
0
0
1
0
0
0
0
1
1
GC3
0
1
1
0
0
0
0
1
1
0
0
1
0
0
1
1
0
0
1
1
1
1
248 of 333
GC2
1
0
0
0
1
1
0
1
1
1
1
0
0
0
1
1
0
0
0
0
0
0
GC1
1
1
1
0
1
1
1
1
1
0
0
1
1
0
0
1
0
0
1
0
1
1
GC0
0
1
0
0
1
1
1
1
0
1
1
0
0
0
0
1
1
1
0
0
0
0
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
Register Name:
Register Description:
Register Address:
Bit #
Name
Default
7
ETS
0
TR.LIC2
Line Interface Control 2
79h
6
LIRST
0
5
IBPV
0
4
TUA1
0
3
JAMUX
0
2
—
0
1
SCLD
0
0
CLDS
0
Bit 7: E1/T1 Select (ETS)
0 = T1 mode selected
1 = E1 mode selected
Bit 6: Line Interface Reset (LIRST). Setting this bit from a 0 to a 1 initiates an internal reset that resets the clock
recovery state machine and re-centers the jitter attenuator. Normally this bit is only toggled on power-up. Must be
cleared and set again for a subsequent reset.
Bit 5: Insert BPV (IBPV). A 0-to-1 transition on this bit causes a single BPV to be inserted into the transmit data
stream. Once this bit has been toggled from a 0 to a 1, the device waits for the next occurrence of three
consecutive 1s to insert the BPV. This bit must be cleared and set again for a subsequent error to be inserted.
Bit 4: Transmit Unframed All Ones (TUA1). The polarity of this bit is set such that the device transmits an allones pattern on power-up or device reset. This bit must be set to a 1 to allow the device to transmit data. The
transmission of this data pattern is always timed off of the JACLK.
0 = transmit all ones at TTIP and TRING
1 = transmit data normally
Bit 3: Jitter Attenuator Mux (JAMUX). Controls the source for JACLK.
0 = JACLK sourced from MCLK (2.048MHz or 1.544MHz at MCLK)
1 = JACLK sourced from internal PLL (2.048MHz at MCLK)
Bit 1: Short-Circuit Limit Disable (ETS = 1) (SCLD). Controls the 50mA (RMS) current limiter.
0 = enable 50mA current limiter
1 = disable 50mA current limiter
Bit 0: Custom Line Driver Select (CLDS). Setting this bit to a 1 redefines the operation of the transmit line driver.
When this bit is set to a 1 and TR.LIC1.5 = TR.LIC1.6 = TR.LIC1.7 = 0, the device generates a square wave at the
TTIP and TRING outputs instead of a normal waveform. When this bit is set to a 1 and TR.LIC1.5 = TR.LIC1.6 =
TR.LIC1.7 ≠ 0, the device forces TTIP and TRING outputs to become open-drain drivers instead of their normal
push-pull operation. This bit should be set to 0 for normal operation of the device.
249 of 333
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
Register Name:
Register Description:
Register Address:
Bit #
Name
Default
7
—
0
TR.LIC3
Line Interface Control 3
7Ah
6
TCES
0
5
RCES
0
4
MM1
0
3
MM0
0
2
RSCLKE
0
1
TSCLKE
0
0
TAOZ
0
Bit 6: Transmit-Clock Edge Select (TCES). Selects which TDCLKI edge to sample TPOSI and TNEGI.
0 = sample TPOSI and TNEGI on falling edge of TDCLKI
1 = sample TPOSI and TNEGI on rising edge of TDCLKI
Bit 5: Receive-Clock Edge Select (RCES). Selects which RDCLKO edge to update RPOSO and RNEGO.
0 = update RPOSO and RNEGO on rising edge of RDCLKO
1 = update RPOSO and RNEGO on falling edge of RDCLKO
Bits 3 and 4: Monitor Mode (MM1 and MM0)
MM1
MM0
0
0
1
1
0
1
0
1
Internal Linear Gain Boost
(dB)
Normal operation (no boost)
20
26
32
Bit 2: Receive Synchronization G.703 Clock Enable (RSCLKE)
0 = disable 1.544MHz (T1)/2.048MHz (E1) synchronization receive mode
1 = enable 1.544MHz (T1)/2.048MHz (E1) synchronization receive mode
Bit 1: Transmit Synchronization G.703 Clock Enable (TSCLKE)
0 = disable 1.544MHz (T1)/2.048MHz (E1) transmit synchronization clock
1 = enable 1.544MHz (T1)/2.048MHz (E1) transmit synchronization clock
Bit 0: Transmit Alternate Ones and Zeros (TAOZ). Transmit a …101010… pattern (customer disconnect
indication signal) at TTIP and TRING. The transmission of this data pattern is always timed off of TCLKT.
0 = disabled
1 = enabled
250 of 333
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
Register Name:
Register Description:
Register Address:
Bit #
Name
Default
TR.LIC4
Line Interface Control 4
7Bh
7
CMIE
0
6
CMII
0
5
MPS1
0
4
MPS0
0
3
TT1
0
Bit 7: CMI Enable (CMIE)
0 = disable CMI mode
1 = enable CMI mode
Bit 6: CMI Invert (CMII)
0 = CMI normal at TTIP and RTIP
1 = invert CMI signal at TTIP and RTIP
Bits 5 and 4: MCLK Prescaler (MPS1 and MPS0)
T1 Mode:
MCLK (MHz)
MPS1
MPS0
1.544
3.088
6.176
12.352
2.048
4.096
8.192
16.384
0
0
1
1
0
0
1
1
0
1
0
1
0
1
0
1
MPS1
MPS0
0
0
1
1
0
1
0
1
E1 Mode:
MCLK
(MHz)
2.048
4.096
8.192
16.384
JAMUX
(TR.LIC2.3)
0
0
0
0
1
1
1
1
JAMUX
(TR.LIC2.3)
0
0
0
0
Bits 3 and 2: Transmit Termination Select (TT1 and TT0)
TT1
0
0
1
1
TT0
0
1
0
1
Internal Transmit-Termination Configuration
Internal transmit-side termination disabled
Internal transmit -side 75Ω enabled
Internal transmit -side 100Ω enabled
Internal transmit -side 120Ω enabled
Bits 1 and 0: Receive Termination Select (RT1 and RT0)
RT1
0
0
1
1
RT0
0
1
0
1
Internal Receive-Termination Configuration
Internal receive-side termination disabled
Internal receive-side 75Ω enabled
Internal receive-side 100Ω enabled
Internal receive-side 120Ω enabled
251 of 333
2
TT0
0
1
RT1
0
0
RT0
0
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
Register Name:
Register Description:
Register Address:
Bit #
Name
Default
7
—
0
TR.PSA1
Pulse Shape Adjustment 1
F1h
6
—
0
5
AGCT2
0
4
SRR1
0
3
AGCT1
0
2
SRR0
0
1
AGCT0
0
0
SRIB0
0
Bits 7 and 6: Set to zero for normal operation.
Bits 5, 3, 1: Automatic Gain Control Target Bits 2, 1, 0 (AGCT2, AGCT1, AGCT0). These three bits adjust the
target amplitude of the waveform when using Automatic Gain Control (AGCE = 0). The adjustment for each setting
is listed below:
Standard Settings for non-automatic gain mode:
AGCT2
AGCT1
AGCT0
AGCAC (in
hex)
0
0
0
00h
0
0
1
02h
0
1
0
08h
0
1
1
0Ah
1
0
0
20h
1
0
1
22h
1
1
0
28h
1
1
1
2Ah
% change in amplitude
0% (default)
- 23%
- 15%
- 8%
+ 6%
+ 10%
+ 15%
+ 35%
Bits 4 and 2: Slew Rate Reduction Control Bits 1 and 0 (SRR1 and SRR0). These bits are a binary weighted
array that can be set to make the waveform "colder" (i.e., increase rise time, reduce overshoot).
Bit 0: Slew Rate Increase "B" (SRIB0). This bit, when set, makes the waveform a bit hotter (different method than
Group 1). Not much effect from this bit should be expected.
Register Name:
Register Description:
Register Address:
Bit #
Name
Default
7
SRIA4
0
TR.PSA2
Pulse Shape Adjustment 2
F2h
6
—
0
5
—
0
4
—
0
3
SRIA3
0
2
—
0
1
—
0
0
—
0
Bits 6, 5, 4, 2, 1, and 0: Unused, must be set to zero for proper operation.
Bits 7 and 3: Slew Rate Increase "A" Control Bits 4 and 3 (SRIA4 and SRIA3). These bits (together with the
SRIA0–SRIA2 in the SRC1 register) form a 5-bit binary weighted array used to increase the slew rate of the output
waveform. However, SRIA3 and SRIA4 have the same weighting. SRIA4 (F2h, bit 7) is the MSB, and SRIA0 (F0h,
bit 5) is the LSB. The more of this array that is set, the "hotter" (i.e., faster rise times, more overshoot) the
waveform.
252 of 333
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
Register Name:
Register Description:
Register Address:
Bit #
Name
Default
7
GRIC
0
TR.IAAR
Idle Array Address Register
7Eh
6
GTIC
0
5
IAA5
0
4
IAA4
0
3
IAA3
0
2
IAA2
0
1
IAA1
0
0
IAA0
0
Bit 7: Global Receive-Idle Code (GRIC). Setting this bit causes all receive channels to be set to the idle code
written to the TR.PCICR register. This bit must be set = 0 for read operations. The value in bits IAA0–IAA5 must be
a valid transmit channel (01h to 20h for E1 mode; 01h to 18h for T1 mode).
Bit 6: Global Transmit-Idle Code (GTIC). Setting this bit causes all transmit channels to be set to the idle code
written to the PCICR register. This bit must be set = 0 for read operations. The value in bits IAA0–IAA5 must be a
valid transmit channel (01h to 20h for E1 mode; 01h to 18h for T1 mode).
GRIC
0
0
1
1
GTIC
0
1
0
1
FUNCTION
Updates a single transmit or receive channel
Updates all transmit channels
Updates all receive channels
Updates all transmit and receive channels
Bits 5 to 0: Channel Pointer Address Bits (IAA5 to IAA0). These bits select the channel to be programmed with
the idle code defined in the TR.PCICR register. IAA0 is the LSB of the 5-bit channel code. Channel 1 is 01h.
Register Name:
Register Description:
Register Address:
Bit #
Name
Default
7
C7
0
TR.PCICR
Per-Channel Idle Code Register
7Fh
6
C6
0
5
C5
0
4
C4
0
3
C3
0
2
C2
0
1
C1
0
0
C0
0
Bits 7 to 0: Per-Channel Idle-Code Bits (C7 to C0). This register defines the idle code to be programmed in the
channel selected by the TR.IAAR register. C0 is the LSB of the idle code (this bit is transmitted last).
Register Name:
Register Description:
Register Address:
Bit #
Name
Default
7
CH8
0
TR.TCICE1
Transmit-Channel Idle-Code Enable Register 1
80h
6
CH7
0
5
CH6
0
4
CH5
0
3
CH4
0
2
CH3
0
Bits 7 to 0: Transmit Channels 8 to 1 Code Insertion Control Bits (CH8 to CH1)
0 = do not insert data from the idle-code array into the transmit data stream
1 = insert data from the idle-code array into the transmit data stream
253 of 333
1
CH2
0
0
CH1
0
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
Register Name:
Register Description:
Register Address:
Bit #
Name
Default
7
CH16
0
TR.TCICE2
Transmit-Channel Idle-Code Enable Register 2
81h
6
CH15
0
5
CH14
0
4
CH13
0
3
CH12
0
2
CH11
0
1
CH10
0
0
CH9
0
1
CH18
0
0
CH17
0
1
CH26
0
0
CH25
0
1
CH2
0
0
CH1
0
Bits 7 to 0: Transmit Channels 16 to 9 Code Insertion Control Bits (CH16 to CH9)
0 = do not insert data from the idle-code array into the transmit data stream
1 = insert data from the idle code-array into the transmit data stream
Register Name:
Register Description:
Register Address:
Bit #
Name
Default
7
CH24
0
TR.TCICE3
Transmit-Channel Idle-Code Enable Register 3
82h
6
CH23
0
5
CH22
0
4
CH21
0
3
CH20
0
2
CH19
0
Bits 7 to 0: Transmit Channels 24 to 17 Code Insertion Control Bits (CH24 to CH17)
0 = do not insert data from the idle-code array into the transmit data stream
1 = insert data from the idle code-array into the transmit data stream
Register Name:
Register Description:
Register Address:
Bit #
Name
Default
7
CH32
0
TR.TCICE4
Transmit-Channel Idle-Code Enable Register 4
83h
6
CH31
0
5
CH30
0
4
CH29
0
3
CH28
0
2
CH27
0
Bits 7 to 0: Transmit Channels 32 to 25 Code Insertion Control Bits (CH32 to CH25)
0 = do not insert data from the idle-code array into the transmit data stream
1 = insert data from the idle-code array into the transmit data stream
Register Name:
Register Description:
Register Address:
Bit #
Name
Default
7
CH8
0
TR.RCICE1
Receive-Channel Idle-Code Enable Register 1
84h
6
CH7
0
5
CH6
0
4
CH5
0
3
CH4
0
2
CH3
0
Bits 7 to 0: Receive Channels 8 to 1 Code Insertion Control Bits (CH8 to CH1)
0 = do not insert data from the idle-code array into the receive data stream
1 = insert data from the idle-code array into the receive data stream
254 of 333
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
Register Name:
Register Description:
Register Address:
Bit #
Name
Default
7
CH16
0
TR.RCICE2
Receive-Channel Idle-Code Enable Register 2
85h
6
CH15
0
5
CH14
0
4
CH13
0
3
CH12
0
2
CH11
0
1
CH10
0
0
CH9
0
1
CH18
0
0
CH17
0
1
CH26
0
0
CH25
0
1
CH2
0
0
CH1
0
Bits 7 to 0: Receive Channels 16 to 9 Code Insertion Control Bits (CH16 to CH9)
0 = do not insert data from the idle-code array into the receive data stream
1 = insert data from the idle-code array into the receive data stream
Register Name:
Register Description:
Register Address:
Bit #
Name
Default
7
CH24
0
TR.RCICE3
Receive-Channel Idle-Code Enable Register 3
86h
6
CH23
0
5
CH22
0
4
CH21
0
3
CH20
0
2
CH19
0
Bits 7 to 0: Receive Channels 24 to 17 Code Insertion Control Bits (CH24 to CH17)
0 = do not insert data from the idle-code array into the receive data stream
1 = insert data from the idle-code array into the receive data stream
Register Name:
Register Description:
Register Address:
Bit #
Name
Default
7
CH32
0
TR.RCICE4
Receive-Channel Idle-Code Enable Register 4
87h
6
CH31
0
5
CH30
0
4
CH29
0
3
CH28
0
2
CH27
0
Bits 7 to 0: Receive Channels 32 to 25 Code Insertion Control Bits (CH32 to CH25)
0 = do not insert data from the idle-code array into the receive data stream
1 = insert data from the idle-code array into the receive data stream
Register Name:
Register Description:
Register Address:
Bit #
Name
Default
7
CH8
0
TR.RCBR1
Receive Channel Blocking Register 1
88h
6
CH7
0
5
CH6
0
4
CH5
0
3
CH4
0
2
CH3
0
Bits 7 to 0: Receive Channels 8 to 1 Channel Blocking Control Bits (CH8 to CH1)
0 = force the RCHBLK pin to remain low during this channel time
1 = force the RCHBLK pin high during this channel time
255 of 333
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
Register Name:
Register Description:
Register Address:
Bit #
Name
Default
7
CH16
0
TR.RCBR2
Receive Channel Blocking Register 2
89h
6
CH15
0
5
CH14
0
4
CH13
0
3
CH12
0
2
CH11
0
1
CH10
0
0
CH9
0
1
CH18
0
0
CH17
0
1
CH26
0
0
CH25
0
Bits 7 to 0: Receive Channels 16 to 9 Channel Blocking Control Bits (CH16 to CH9)
0 = force the RCHBLK pin to remain low during this channel time
1 = force the RCHBLK pin high during this channel time
Register Name:
Register Description:
Register Address:
Bit #
Name
Default
7
CH24
0
TR.RCBR3
Receive Channel Blocking Register 3
8Ah
6
CH23
0
5
CH22
0
4
CH21
0
3
CH20
0
2
CH19
0
Bits 7 to 0: Receive Channels 24 to 17 Channel Blocking Control Bits (CH24 to CH17)
0 = force the RCHBLK pin to remain low during this channel time
1 = force the RCHBLK pin high during this channel time
Register Name:
Register Description:
Register Address:
Bit #
Name
Default
7
CH32
0
TR.RCBR4
Receive Channel Blocking Register 4
8Bh
6
CH31
0
5
CH30
0
4
CH29
0
3
CH28
0
2
CH27
0
Bits 7 to 0: Receive Channels 32 to 25 Channel Blocking Control Bits (CH32 to CH25)
0 = force the RCHBLK pin to remain low during this channel time
1 = force the RCHBLK pin high during this channel time
256 of 333
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
Register Name:
Register Description:
Register Address:
Bit #
Name
Default
7
CH8
0
TR.TCBR1
Transmit Channel Blocking Register 1
8Ch
6
CH7
0
5
CH6
0
4
CH5
0
3
CH4
0
2
CH3
0
1
CH2
0
0
CH1
0
1
CH10
0
0
CH9
0
1
CH18
0
0
CH17
0
1
CH26
0
0
CH25
0
Bits 7 to 0: Transmit Channels 8 to 1 Channel Blocking Control Bits (CH8 to CH1)
0 = force the TCHBLK pin to remain low during this channel time
1 = force the TCHBLK pin high during this channel time
Register Name:
Register Description:
Register Address:
Bit #
Name
Default
7
CH16
0
TR.TCBR2
Transmit Channel Blocking Register 2
8Dh
6
CH15
0
5
CH14
0
4
CH13
0
3
CH12
0
2
CH11
0
Bits 7 to 0: Transmit Channels 16 to 9 Channel Blocking Control Bits (CH16 to CH9)
0 = force the TCHBLK pin to remain low during this channel time
1 = force the TCHBLK pin high during this channel time
Register Name:
Register Description:
Register Address:
Bit #
Name
Default
7
CH24
0
TR.TCBR3
Transmit Channel Blocking Register 3
8Eh
6
CH23
0
5
CH22
0
4
CH21
0
3
CH20
0
2
CH19
0
Bits 7 to 0: Transmit Channels 24 to 17 Channel Blocking Control Bits (CH24 to CH17)
0 = force the TCHBLK pin to remain low during this channel time
1 = force the TCHBLK pin high during this channel time
Register Name:
Register Description:
Register Address:
Bit #
Name
Default
7
CH32
0
TR.TCBR4
Transmit Channel Blocking Register 4
8Fh
6
CH31
0
5
CH30
0
4
CH29
0
3
CH28
0
2
CH27
0
Bits 7 to 0: Transmit Channels 32 to 25 Channel Blocking Control Bits (CH32 to CH25)
0 = force the TCHBLK pin to remain low during this channel time
1 = force the TCHBLK pin high during this channel time
257 of 333
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
Register Name:
Register Description:
Register Address:
TR.H1TC, TR.H2TC
HDLC #1 Transmit Control
HDLC #2 Transmit Control
90h, A0h
Bit #
Name
Default
6
TEOML
0
7
NOFS
0
5
THR
0
4
THMS
0
3
TFS
0
2
TEOM
0
1
TZSD
0
0
TCRCD
0
Bit 7: Number of Flags Select (NOFS)
0 = send one flag between consecutive messages
1 = send two flags between consecutive messages
Bit 6: Transmit End of Message and Loop (TEOML). To loop on a message, this bit should be set to a 1 just
before the last data byte of an HDLC packet is written into the transmit FIFO. The message repeats until the user
clears this bit or a new message is written to the transmit FIFO. If the host clears the bit, the looping message
completes, then flags are transmitted until a new message is written to the FIFO. If the host terminates the loop by
writing a new message to the FIFO, the loop terminates, one or two flags are transmitted, and the new message
starts. If not disabled through TCRCD, the transmitter automatically appends a 2-byte CRC code to the end of all
messages. This is useful for transmitting consecutive SS7 FISUs without host intervention.
Bit 5: Transmit HDLC Reset (THR). Resets the transmit HDLC controller and flushes the transmit FIFO. An abort
followed by 7Eh or FFh flags/idle is transmitted until a new packet is initiated by writing new data into the FIFO.
Must be cleared and set again for a subsequent reset.
0 = normal operation
1 = reset transmit HDLC controller and flush the transmit FIFO
Bit 4: Transmit HDLC Mapping Select (THMS)
0 = transmit HDLC assigned to channels
1 = transmit HDLC assigned to FDL (T1 mode), Sa bits (E1 mode)
Bit 3: Transmit Flag/Idle Select (TFS). This bit selects the intermessage fill character after the closing and before
the opening flags (7Eh).
0 = 7Eh
1 = FFh
Bit 2: Transmit End of Message (TEOM). Should be set to a 1 just before the last data byte of an HDLC packet is
written into the transmit FIFO at HxTF. If not disabled through TCRCD, the transmitter automatically appends a 2byte CRC code to the end of the message.
Bit 1: Transmit Zero-Stuffer Defeat (TZSD). The zero-stuffer function automatically inserts a 0 in the message
field (between the flags) after five consecutive 1s to prevent the emulation of a flag or abort sequence by the data
pattern. The receiver automatically removes (destuffs) any 0 after five 1s in the message field.
0 = enable the zero stuffer (normal operation)
1 = disable the zero stuffer
Bit 0: Transmit CRC Defeat (TCRCD). A 2-byte CRC code is automatically appended to the outbound message.
This bit can be used to disable the CRC function.
0 = enable CRC generation (normal operation)
1 = disable CRC generation
258 of 333
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
Register Name:
Register Description:
Register Address:
Bit #
Name
Default
TR.H1FC, TR.H2FC
HDLC #1 FIFO Control
HDLC #2 FIFO Control
91h, A1h
7
—
0
6
—
0
5
TFLWM2
0
4
TFLWM1
0
3
TFLWM0
0
Bits 5 to 3: Transmit FIFO Low-Watermark Select (TFLWM2 to TFLWM0)
TFLWM2
TFLWM1
TFLWM0
0
0
0
0
1
1
1
1
0
0
1
1
0
0
1
1
0
1
0
1
0
1
0
1
Transmit FIFO Watermark
(bytes)
4
16
32
48
64
80
96
112
Bits 2 to 0: Receive FIFO High-Watermark Select (RFHWM2 to RFHWM0)
RFHWM2
RFHWM1
RFHWM0
0
0
0
0
1
1
1
1
0
0
1
1
0
0
1
1
0
1
0
1
0
1
0
1
Receive FIFO Watermark
(bytes)
4
16
32
48
64
80
96
112
259 of 333
2
RFHWM2
0
1
RFHWM1
0
0
RFHWM0
0
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
Register Name:
Register Description:
Register Address:
TR.H1RCS1, TR.H1RCS2, TR.H1RCS3, TR.H1RCS4
TR.H2RCS1, TR.H2RCS2, TR.H2RCS3, TR.H2RCS4
HDLC #1 Receive Channel Select
HDLC #2 Receive Channel Select
92h, 93h, 94h, 95h
A2h, A3h, A4h, A5h
(MSB)
(LSB)
RHCS8
RHCS16
RHCS24
RHCS32
RHCS7
RHCS15
RHCS23
RHCS31
RHCS6
RHCS14
RHCS22
RHCS30
RHCS5
RHCS13
RHCS21
RHCS29
RHCS4
RHCS12
RHCS20
RHCS28
RHCS3
RHCS11
RHCS19
RHCS27
RHCS2
RHCS10
RHCS18
RHCS26
RHCS1
RHCS9
RHCS17
RHCS25
0
0
0
0
0
0
0
0
H1RCS1
H1RCS2
H1RCS3
H1RCS4
Default
Setting a bit to 1 will enable that channel’s data to be sent to the Receive HDLC Controller. Multiple bits may be
selected for each of the two HDLC controllers in the integrated T1/E1 transceiver.
260 of 333
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
Register Name:
Register Description:
Register Address:
TR.H1RTSBS, TR.H2RTSBS
HDLC #1 Receive Time Slot Bits/Sa Bits Select
HDLC #2 Receive Time Slot Bits/Sa Bits Select
96h, A6h
Bit #
Name
Default
6
RCB7SE
0
7
RCB8SE
0
5
RCB6SE
0
4
RCB5SE
0
3
RCB4SE
0
2
RCB3SE
0
1
RCB2SE
0
0
RCB1SE
0
Bit 7: Receive Channel Bit 8 Suppress Enable (RCB8SE). MSB of the channel. Set to 1 to stop this bit from
being used.
Bit 6: Receive Channel Bit 7 Suppress Enable (RCB7SE). Set to 1 to stop this bit from being used.
Bit 5: Receive Channel Bit 6 Suppress Enable (RCB6SE). Set to 1 to stop this bit from being used.
Bit 4: Receive Channel Bit 5 Suppress Enable/Sa4 Bit Enable (RCB5SE). Set to 1 to stop this bit from being
used.
Bit 3: Receive Channel Bit 4 Suppress Enable/Sa5 Bit Enable (RCB4SE). Set to 1 to stop this bit from being
used.
Bit 2: Receive Channel Bit 3 Suppress Enable/Sa6 Bit Enable (RCB3SE). Set to 1 to stop this bit from being
used.
Bit 1: Receive Channel Bit 2 Suppress Enable/Sa7 Bit Enable (RCB2SE). Set to 1 to stop this bit from being
used.
Bit 0: Receive Channel Bit 1 Suppress Enable/Sa8 Bit Enable (RCB1SE ). LSB of the channel. Set to 1 to stop
this bit from being used.
261 of 333
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
Register Name:
Register Description:
Register Address:
TR.H1TCS1, TR.H1TCS2, TR.H1TCS3, TR.H1TCS4
TR.H2TCS1, TR.H2TCS2, TR.H2TCS3, TR.H2TCS4
HDLC #1 Transmit Channel Select
HDLC #2 Transmit Channel Select
97h, 98h, 99h, 9Ah
A7h, A8h, A9h, AAh
(MSB)
(LSB)
THCS8
THCS16
THCS24
THCS32
THCS7
THCS15
THCS23
THCS31
THCS6
THCS14
THCS22
THCS30
THCS5
THCS13
THCS21
THCS29
THCS4
THCS12
THCS20
THCS28
THCS3
THCS11
THCS19
THCS27
THCS2
THCS10
THCS18
THCS26
THCS1
THCS9
THCS17
THCS25
0
0
0
0
0
0
0
0
H1TCS1
H1TCS2
H1TCS3
H1TCS4
Default
Setting a bit to 1 will enable data from the Transmit HDLC Controller to be sent on that channel. Multiple bits may
be selected for each of the two HDLC controllers in the integrated T1/E1 transceiver.
262 of 333
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
Register Name:
Register Description:
Register Address:
TR.H1TTSBS, TR.H2TTSBS
HDLC #1 Transmit Time Slot Bits/Sa Bits Select
HDLC #2 Transmit Time Slot Bits/Sa Bits Select
9Bh, ABh
Bit #
Name
Default
6
TCB7SE
0
7
TCB8SE
0
5
TCB6SE
0
4
TCB5SE
0
3
TCB4SE
0
2
TCB3SE
0
1
TCB2SE
0
0
TCB1SE
0
Bit 7: Transmit Channel Bit 8 Suppress Enable (TCB1SE). MSB of the channel. Set to 1 to stop this bit from
being used.
Bit 6: Transmit Channel Bit 7 Suppress Enable (TCB1SE). Set to 1 to stop this bit from being used.
Bit 5: Transmit Channel Bit 6 Suppress Enable (TCB1SE). Set to 1 to stop this bit from being used.
Bit 4: Transmit Channel Bit 5 Suppress Enable/Sa4 Bit Enable (TCB1SE). Set to 1 to stop this bit from being
used.
Bit 3: Transmit Channel Bit 4 Suppress Enable/Sa5 Bit Enable (TCB1SE). Set to 1 to stop this bit from being
used.
Bit 2: Transmit Channel Bit 3 Suppress Enable/Sa6 Bit Enable (TCB1SE). Set to 1 to stop this bit from being
used.
Bit 1: Transmit Channel Bit 2 Suppress Enable/Sa7 Bit Enable (TCB1SE). Set to 1 to stop this bit from being
used.
Bit 0: Transmit Channel Bit 1 Suppress Enable/Sa8 Bit Enable (TCB1SE). LSB of the channel. Set to 1 to stop
this bit from being used.
Register Name:
Register Description:
Register Address:
TR.H1RPBA, TR.H2RPBA
HDLC #1 Receive Packet Bytes Available
HDLC #2 Receive Packet Bytes Available
9Ch, ACh
Bit #
Name
Default
6
RPBA6
0
7
MS
0
5
RPBA5
0
4
RPBA4
0
3
RPBA3
0
2
RPBA2
0
1
RPBA1
0
0
RPBA0
0
Bit 7: Message Status (MS)
0 = bytes indicated by RPBA0 through RPBA6 are the end of a message. Host must check the INFO5 or
INFO6 register for details.
1 = bytes indicated by RPBA0 through RPBA6 are the beginning or continuation of a message. The host
does not need to check the INFO5 or INFO6 register.
Bits 6 to 0: Receive FIFO Packet Bytes Available Count (RPBA6 to RPBA0). RPBA0 is the LSB.
263 of 333
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
Register Name:
Register Description:
Register Address:
Bit #
Name
Default
7
THD7
0
TR.H1TF, TR.H2TF
HDLC #1 Transmit FIFO
HDLC #2 Transmit FIFO
9Dh, ADh
6
THD6
0
5
THD5
0
4
THD4
0
3
THD3
0
2
THD2
0
1
THD1
0
0
THD0
0
2
RHD2
0
1
RHD1
0
0
RHD0
0
Bit 7: Transmit HDLC Data Bit 7 (THD7). MSB of an HDLC packet data byte.
Bit 6: Transmit HDLC Data Bit 6 (THD6)
Bit 5: Transmit HDLC Data Bit 5 (THD5)
Bit 4: Transmit HDLC Data Bit 4 (THD4)
Bit 3: Transmit HDLC Data Bit 3 (THD3)
Bit 2: Transmit HDLC Data Bit 2 (THD2)
Bit 1: Transmit HDLC Data Bit 1 (THD1)
Bit 0: Transmit HDLC Data Bit 0 (THD0). LSB of an HDLC packet data byte.
Register Name:
Register Description:
Register Address:
Bit #
Name
Default
7
RHD7
0
TR.H1RF, TR.H2RF
HDLC #1 Receive FIFO
HDLC #2 Receive FIFO
9Eh, AEh
6
RHD6
0
5
RHD5
0
4
RHD4
0
3
RHD3
0
Bit 7: Receive HDLC Data Bit 7 (RHD7). MSB of an HDLC packet data byte.
Bit 6: Receive HDLC Data Bit 6 (RHD6)
Bit 5: Receive HDLC Data Bit 5 (RHD5)
Bit 4: Receive HDLC Data Bit 4 (RHD4)
Bit 3: Receive HDLC Data Bit 3 (RHD3)
Bit 2: Receive HDLC Data Bit 2 (RHD2)
Bit 1: Receive HDLC Data Bit 1 (RHD1)
Bit 0: Receive HDLC Data Bit 0 (RHD0). LSB of an HDLC packet data byte.
264 of 333
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
Register Name:
Register Description:
Register Address:
TR.H1TFBA, TR.H2TFBA
HDLC #1 Transmit FIFO Buffer Available
HDLC #2 Transmit FIFO Buffer Available
9Fh, AFh
Bit #
Name
Default
6
TFBA6
0
7
TFBA7
0
5
TFBA5
0
4
TFBA4
0
3
TFBA3
0
2
TFBA2
0
1
TFBA1
0
0
TFBA0
0
1
RDN1
0
0
RDN0
0
Bits 7 to 0: Transmit FIFO Bytes Available (TFBA7 to TFBA0). TFBA0 is the LSB.
Register Name:
Register Description:
Register Address:
Bit #
Name
Default
7
TC1
0
TR.IBCC
In-Band Code Control Register
B6h
6
TC0
0
5
RUP2
0
4
RUP1
0
3
RUP0
0
Bits 7 and 6: Transmit Code Length Definition Bits (TC1 and TC0)
TC1
0
0
1
1
TC0
0
1
0
1
Length Selected (bits)
5
6/3
7
16/8/4/2/1
Bits 5 to 3: Receive Up-Code Length Definition Bits (RUP2 to RUP1)
RUP2
0
0
0
0
1
1
1
1
RUP1
0
0
1
1
0
0
1
1
RUP0
0
1
0
1
0
1
0
1
Length Selected (bits)
1
2
3
4
5
6
7
8/16
Bits 2 to 0: Receive Down-Code Length Definition Bits (RDN2 to RDN0)
RDN2
0
0
0
0
1
1
1
1
RDN1
0
0
1
1
0
0
1
1
RDN0
0
1
0
1
0
1
0
1
Length Selected (bits)
1
2
3
4
5
6
7
8/16
265 of 333
2
RDN2
0
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
Register Name:
Register Description:
Register Address:
Bit #
Name
Default
7
C7
0
TR.TCD1
Transmit Code-Definition Register 1
B7h
6
C6
0
5
C5
0
4
C4
0
3
C3
0
2
C2
0
1
C1
0
0
C0
0
1
C1
0
0
C0
0
Bit 7: Transmit Code-Definition Bit 7 (C7). First bit of the repeating pattern.
Bits 6 to 3: Transmit Code-Definition Bits 6 to 3 (C6 to C3)
Bit 2: Transmit Code-Definition Bit 2 (C2). A don’t care if a 5-bit length is selected.
Bit 1: Transmit Code-Definition Bit 1 (C1). A don’t care if a 5-bit or 6-bit length is selected.
Bit 0: Transmit Code-Definition Bit 0 (C0). A don’t care if a 5-, 6-, or 7-bit length is selected.
Register Name:
Register Description:
Register Address:
Bit #
Name
Default
7
C7
0
TR.TCD2
Transmit Code Definition Register 2
B8h
6
C6
0
5
C5
0
4
C4
0
3
C3
0
2
C2
0
Least significant byte of 16 bit code.
Bits 7 to 0: Transmit Code-Definition Bits 7 to 0 (C7 to C0). A don’t care if a 5-, 6-, or 7-bit length is selected.
266 of 333
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
Register Name:
Register Description:
Register Address:
Bit #
Name
Default
7
C7
0
TR.RUPCD1
Receive Up-Code Definition Register 1
B9h
6
C6
0
5
C5
0
4
C4
0
3
C3
0
2
C2
0
1
C1
0
0
C0
0
Note: Writing this register resets the detector’s integration period.
Bit 7: Receive Up-Code Definition Bit 7 (C7). First bit of the repeating pattern.
Bit 6: Receive Up-Code Definition Bit 6 (C6). A don’t care if a 1-bit length is selected.
Bit 5: Receive Up-Code Definition Bit 5 (C5). A don’t care if a 1-bit or 2-bit length is selected.
Bit 4: Receive Up-Code Definition Bit 4 (C4). A don’t care if a 1-bit to 3-bit length is selected.
Bit 3: Receive Up-Code Definition Bit 3 (C3). A don’t care if a 1-bit to 4-bit length is selected.
Bit 2: Receive Up-Code Definition Bit 2 (C2). A don’t care if a 1-bit to 5-bit length is selected.
Bit 1: Receive Up-Code Definition Bit 1 (C1). A don’t care if a 1-bit to 6-bit length is selected.
Bit 0: Receive Up-Code Definition Bit 0 (C0). A don’t care if a 1-bit to 7-bit length is selected.
Register Name:
Register Description:
Register Address:
Bit #
Name
Default
7
C7
0
TR.RUPCD2
Receive Up-Code Definition Register 2
BAh
6
C6
0
5
C5
0
4
C4
0
3
C3
0
2
C2
0
1
C1
0
0
C0
0
Bits 7 to 0: Receive Up-Code Definition Bits 7 to 0 (C7 to C0). A don’t care if a 1-bit to 7-bit length is selected.
267 of 333
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
Register Name:
Register Description:
Register Address:
Bit #
Name
Default
TR.RDNCD1
Receive Down-Code Definition Register 1
BBh
7
C7
0
6
C6
0
5
C5
0
4
C4
0
3
C3
0
2
C2
0
1
C1
0
Note: Writing this register resets the detector’s integration period.
Bit 7: Receive Down-Code Definition Bit 7 (C7). First bit of the repeating pattern.
Bit 6: Receive Down-Code Definition Bit 6 (C6). A don’t care if a 1-bit length is selected.
Bit 5: Receive Down-Code Definition Bit 5 (C5). A don’t care if a 1-bit or 2-bit length is selected.
Bit 4: Receive Down-Code Definition Bit 4 (C4). A don’t care if a 1-bit to 3-bit length is selected.
Bit 3: Receive Down-Code Definition Bit 3 (C3). A don’t care if a 1-bit to 4-bit length is selected.
Bit 2: Receive Down-Code Definition Bit 2 (C2). A don’t care if a 1-bit to 5-bit length is selected.
Bit 1: Receive Down-Code Definition Bit 1 (C1). A don’t care if a 1-bit to 6-bit length is selected.
Bit 0: Receive Down-Code Definition Bit 0 (C0). A don’t care if a 1-bit to 7-bit length is selected.
Register Name:
Register Description:
Register Address:
TR.RDNCD2
Receive Down-Code Definition Register 2
BCh
Bit #
Name
Default
6
C6
0
7
C7
0
5
C5
0
4
C4
0
3
C3
0
2
C2
0
1
C1
0
0
C0
0
Bits 7 to 0: Receive Down-Code Definition Bits 7 to 0 (C7 to C0). A don’t care if a 1-bit to 7-bit length is
selected.
268 of 333
0
C0
0
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
Register Name:
Register Description:
Register Address:
Bit #
Name
Default
7
—
0
TR.RSCC
In-Band Receive Spare Control Register
BDh
6
—
0
5
—
0
4
—
0
3
—
0
Bits 7 to 3: Unused, must be set to 0 for proper operation
Bits 2 to 0: Receive Spare Code Length Definition Bits (RSC2 to RSC0)
RSC2
RSC1
RSC0
0
0
0
0
1
1
1
1
0
0
1
1
0
0
1
1
0
1
0
1
0
1
0
1
Length Selected
(bits)
1
2
3
4
5
6
7
8/16
269 of 333
2
RSC2
0
1
RSC1
0
0
RSC0
0
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
Register Name:
Register Description:
Register Address:
Bit #
Name
Default
7
C7
0
TR.RSCD1
Receive Spare-Code Definition Register 1
BEh
6
C6
0
5
C5
0
4
C4
0
3
C3
0
2
C2
0
1
C1
0
0
C0
0
Note: Writing this register resets the detector’s integration period.
Bit 7: Receive Spare-Code Definition Bit 7 (C7). First bit of the repeating pattern.
Bit 6: Receive Spare-Code Definition Bit 6 (C6). A don’t care if a 1-bit length is selected.
Bit 5: Receive Spare-Code Definition Bit 5 (C5). A don’t care if a 1-bit or 2-bit length is selected.
Bit 4: Receive Spare-Code Definition Bit 4 (C4). A don’t care if a 1-bit to 3-bit length is selected.
Bit 3: Receive Spare-Code Definition Bit 3 (C3). A don’t care if a 1-bit to 4-bit length is selected.
Bit 2: Receive Spare-Code Definition Bit 2 (C2). A don’t care if a 1-bit to 5-bit length is selected.
Bit 1: Receive Spare-Code Definition Bit 1 (C1). A don’t care if a 1-bit to 6-bit length is selected.
Bit 0: Receive Spare-Code Definition Bit 0 (C0). A don’t care if a 1-bit to 7-bit length is selected.
Register Name:
Register Description:
Register Address:
Bit #
Name
Default
7
C7
0
TR.RSCD2
Receive Spare Code Definition Register 2
BFh
6
C6
0
5
C5
0
4
C4
0
3
C3
0
2
C2
0
1
C1
0
0
C0
0
Bits 7 to 0: Receive Spare-Code Definition Bits 7 to 0 (C7 to C0). A don’t care if a 1-bit to 7-bit length is
selected.
270 of 333
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
Register Name:
Register Description:
Register Address:
Bit #
Name
Default
TR.RFDL (TR.BOCC.4 = 1)
Receive FDL Register
C0h
7
—
0
6
—
0
5
RBOC5
0
4
RBOC4
0
3
RBOC3
0
2
RBOC2
0
1
RBOC1
0
0
RBOC0
0
3
RFDL3
0
2
RFDL2
0
1
RFDL1
0
0
RFDL0
0
RFDL register bit definitions when TR.BOCC.4 = 1:
Bit 5: BOC Bit 5 (RBOC5)
Bit 4: BOC Bit 4 (RBOC4)
Bit 3: BOC Bit 3 (RBOC3)
Bit 2: BOC Bit 2 (RBOC2)
Bit 1: BOC Bit 1 (RBOC1)
Bit 0: BOC Bit 0 (RBOC0)
Register Name:
Register Description:
Register Address:
TR.RFDL (TR.BOCC.4 = 0)
Receive FDL Register
C0h
Bit #
Name
Default
6
RFDL6
0
7
RFDL7
0
5
RFDL5
0
4
RFDL4
0
The receive FDL register (TR.RFDL) reports the incoming FDL or the incoming Fs bits. The LSB is received first.
Bit 7: Receive FDL Bit 7 (RFDL7). MSB of the received FDL code.
Bit 6: Receive FDL Bit 6 (RFDL6)
Bit 5: Receive FDL Bit 5 (RFDL5)
Bit 4: Receive FDL Bit 4 (RFDL4)
Bit 3: Receive FDL Bit 3 (RFDL3)
Bit 2: Receive FDL Bit 2 (RFDL2)
Bit 1: Receive FDL Bit 1 (RFDL1)
Bit 0: Receive FDL Bit 0 (RFDL0). LSB of the received FDL code.
271 of 333
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
Register Name:
Register Description:
Register Address:
Bit #
Name
Default
7
TFDL7
0
TR.TFDL
Transmit FDL Register
C1h
6
TFDL6
0
5
TFDL5
0
4
TFDL4
0
3
TFDL3
0
2
TFDL2
0
1
TFDL1
0
0
TFDL0
0
Note: Also used to insert Fs framing pattern in D4 framing mode.
The transmit FDL register (TR.TFDL) contains the FDL information that is to be inserted on a byte basis into the
outgoing T1 data stream. The LSB is transmitted first.
Bit 7: Transmit FDL Bit 7 (TFDL7). MSB of the transmit FDL code.
Bit 6: Transmit FDL Bit 6 (TFDL6)
Bit 5: Transmit FDL Bit 5 (TFDL5)
Bit 4: Transmit FDL Bit 4 (TFDL4)
Bit 3: Transmit FDL Bit 3 (TFDL3)
Bit 2: Transmit FDL Bit 2 (TFDL2)
Bit 1: Transmit FDL Bit 1 (TFDL1)
Bit 0: Transmit FDL Bit 0 (TFDL0). LSB of the transmit FDL code.
Register Name:
Register Description:
Register Address:
Bit #
Name
Default
7
RFDLM7
0
TR.RFDLM1, TR.RFDLM2
Receive FDL Match Register 1
Receive FDL Match Register 2
C2h, C3h
6
RFDLM6
0
5
RFDLM5
0
4
RFDLM4
0
3
RFDLM3
0
Bit 7: Receive FDL Match Bit 7 (RFDLM7). MSB of the FDL match code.
Bit 6: Receive FDL Match Bit 6 (RFDLM6)
Bit 5: Receive FDL Match Bit 5 (RFDLM5)
Bit 4: Receive FDL Match Bit 4 (RFDLM4)
Bit 3: Receive FDL Match Bit 3 (RFDLM3)
Bit 2: Receive FDL Match Bit 2 (RFDLM2)
Bit 1: Receive FDL Match Bit 1 (RFDLM1)
Bit 0: Receive FDL Match Bit 0 (RFDLM0). LSB of the FDL match code.
272 of 333
2
RFDLM2
0
1
RFDLM1
0
0
RFDLM0
0
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
Register Name:
Register Description:
Register Address:
Bit #
Name
Default
TR.IBOC
Interleave Bus Operation Control Register
C5h
7
—
0
6
IBS1
0
5
IBS0
0
4
—
0
3
IBOEN
0
2
DA2
0
1
DA1
0
Bits 7 and 4: Reserved, must be set to zero for proper operation.
Bits 6 and 5: IBO Bus Size Bit 1 (IBS1 and IBS0). Indicates how many devices are on the bus.
IBS1
0
IBS0
1
BUS SIZE
Four Devices on Bus
Bit 3: Interleave Bus Operation Enable (IBOEN). THIS BIT MUST BE SET TO 1.
0 = Interleave Bus Operation disabled—allowed for application-specific requirements.
1 = Interleave Bus Operation enabled—normal operation.
Bits 2 to 0: Device Assignment Bits (DA2 to DA0)
DA2
0
0
0
0
DA1
0
0
1
1
DA0
0
1
0
1
DEVICE POSITION
1st device on bus
2nd device on bus
3rd device on bus
4th device on bus
273 of 333
0
DA0
0
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
Register Name:
Register Description:
Register Address:
Bit #
Name
Default
TR.RAF
Receive Align Frame Register
C6h
7
Si
0
6
0
0
5
0
0
4
1
0
3
1
0
2
0
0
1
1
0
0
1
0
3
Sa5
0
2
Sa6
0
1
Sa7
0
0
Sa8
0
Bit 7: International Bit (Si)
Bit 6: Frame Alignment Signal Bit (0)
Bit 5: Frame Alignment Signal Bit (0)
Bit 4: Frame Alignment Signal Bit (1)
Bit 3: Frame Alignment Signal Bit (1)
Bit 2: Frame Alignment Signal Bit (0)
Bit 1: Frame Alignment Signal Bit (1)
Bit 0: Frame Alignment Signal Bit (1)
Register Name:
Register Description:
Register Address:
Bit #
Name
Default
TR.RNAF
Receive Nonalign Frame Register
C7h
7
Si
0
6
1
0
5
A
0
4
Sa4
0
Bit 7: International Bit (Si)
Bit 6: Frame Nonalignment Signal Bit (1)
Bit 5: Remote Alarm (A)
Bit 4: Additional Bit 4 (Sa4)
Bit 3: Additional Bit 5 (Sa5)
Bit 2: Additional Bit 6 (Sa6)
Bit 1: Additional Bit 7 (Sa7)
Bit 0: Additional Bit 8 (Sa8)
274 of 333
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
Register Name:
Register Description:
Register Address:
Bit #
Name
Default
7
SiF0
0
TR.RSiAF
Received Si Bits of the Align Frame
C8h
6
SiF2
0
5
SiF4
0
4
SiF6
0
3
SiF8
0
2
SiF10
0
1
SiF12
0
0
SiF14
0
2
SiF11
0
1
SiF13
0
0
SiF15
0
Bit 7: Si Bit of Frame 0 (SiF0)
Bit 6: Si Bit of Frame 2 (SiF2)
Bit 5: Si Bit of Frame 4 (SiF4)
Bit 4: Si Bit of Frame 6 (SiF6)
Bit 3: Si Bit of Frame 8 (SiF8)
Bit 2: Si Bit of Frame 10 (SiF10)
Bit 1: Si Bit of Frame 12 (SiF12)
Bit 0: Si Bit of Frame 14 (SiF14)
Register Name:
Register Description:
Register Address:
Bit #
Name
Default
7
SiF1
0
TR.RSiNAF
Received Si Bits of the Nonalign Frame
C9h
6
SiF3
0
5
SiF5
0
4
SiF7
0
Bit 7: Si Bit of Frame 1 (SiF1)
Bit 6: Si Bit of Frame 3 (SiF3)
Bit 5: Si Bit of Frame 5 (SiF5)
Bit 4: Si Bit of Frame 7 (SiF7)
Bit 3: Si Bit of Frame 9 (SiF9)
Bit 2: Si Bit of Frame 11 (SiF11)
Bit 1: Si Bit of Frame 13 (SiF13)
Bit 0: Si Bit of Frame 15 (SiF15)
275 of 333
3
SiF9
0
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
Register Name:
Register Description:
Register Address:
TR.RRA
Received Remote Alarm
CAh
Bit #
Name
Default
6
RRAF3
0
7
RRAF1
0
5
RRAF5
0
4
RRAF7
0
3
RRAF9
0
2
RRAF11
0
1
RRAF13
0
0
RRAF15
0
4
RSa4F7
0
3
RSa4F9
0
2
RSa4F11
0
1
RSa4F13
0
0
RSa4F15
0
Bit 7: Remote Alarm Bit of Frame 1 (RRAF1)
Bit 6: Remote Alarm Bit of Frame 3 (RRAF3)
Bit 5: Remote Alarm Bit of Frame 5 (RRAF5)
Bit 4: Remote Alarm Bit of Frame 7 (RRAF7)
Bit 3: Remote Alarm Bit of Frame 9 (RRAF9)
Bit 2: Remote Alarm Bit of Frame 11 (RRAF11)
Bit 1: Remote Alarm Bit of Frame 13 (RRAF13)
Bit 0: Remote Alarm Bit of Frame 15 (RRAF15)
Register Name:
Register Description:
Register Address:
TR.RSa4
Received Sa4 Bits
CBh
Bit #
Name
Default
6
RSa4F3
0
7
RSa4F1
0
5
RSa4F5
0
Bit 7: Sa4 Bit of Frame 1 (RSa4F1)
Bit 6: Sa4 Bit of Frame 3 (RSa4F3)
Bit 5: Sa4 Bit of Frame 5(RSa4F5)
Bit 4: Sa4 Bit of Frame 7 (RSa4F7)
Bit 3: Sa4 Bit of Frame 9 (RSa4F9)
Bit 2: Sa4 Bit of Frame 11 (RSa4F11)
Bit 1: Sa4 Bit of Frame 13 (RSa4F13)
Bit 0: Sa4 Bit of Frame 15 (RSa4F15)
276 of 333
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
Register Name:
Register Description:
Register Address:
TR.RSa5
Received Sa5 Bits
CCh
Bit #
Name
Default
6
RSa5F3
0
7
RSa5F1
0
5
RSa5F5
0
4
RSa5F7
0
3
RSa5F9
0
2
RSa5F11
0
1
RSa5F13
0
0
RSa5F15
0
4
RSa6F7
0
3
RSa6F9
0
2
RSa6F11
0
1
RSa6F13
0
0
RSa6F15
0
Bit 7: Sa5 Bit of Frame 1 (RSa5F1)
Bit 6: Sa5 Bit of Frame 3 (RSa5F3)
Bit 5: Sa5 Bit of Frame 5 (RSa5F5)
Bit 4: Sa5 Bit of Frame 7 (RSa5F7)
Bit 3: Sa5 Bit of Frame 9 (RSa5F9)
Bit 2: Sa5 Bit of Frame 11 (RSa5F11)
Bit 1: Sa5 Bit of Frame 13 (RSa5F13)
Bit 0: Sa5 Bit of Frame 15 (RSa5F15)
Register Name:
Register Description:
Register Address:
TR.RSa6
Received Sa6 Bits
CDh
Bit #
Name
Default
6
RSa6F3
0
7
RSa6F1
0
5
RSa6F5
0
Bit 7: Sa6 Bit of Frame 3(RSa6F3)
Bit 6: Sa6 Bit of Frame 4 (RSa6F4)
Bit 5: Sa6 Bit of Frame 5 (RSa6F5)
Bit 4: Sa6 Bit of Frame 7 (RSa6F7)
Bit 3: Sa6 Bit of Frame 9 (RSa6F9)
Bit 2: Sa6 Bit of Frame 11 (RSa6F11)
Bit 1: Sa6 Bit of Frame 13 (RSa6F13)
Bit 0: Sa6 Bit of Frame 15 (RSa6F15)
277 of 333
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
Register Name:
Register Description:
Register Address:
TR.RSa7
Received Sa7 Bits
CEh
Bit #
Name
Default
6
Rsa7F3
0
7
RSa7F1
0
5
RSa7F5
0
4
RSa7F7
0
3
RSa7F9
0
2
RSa7F11
0
1
RSa7F13
0
0
RSa7F15
0
4
RSa8F7
0
3
RSa8F9
0
2
RSa8F11
0
1
RSa8F13
0
0
RSa8F15
0
Bit 7: Sa7 Bit of Frame 1(RSa4F1)
Bit 6: Sa7 Bit of Frame 3 (RSa7F3)
Bit 5: Sa7 Bit of Frame 5 (RSa7F5)
Bit 4: Sa7 Bit of Frame 7 (RSa7F7)
Bit 3: Sa7 Bit of Frame 9 (RSa7F9)
Bit 2: Sa7 Bit of Frame 11 (RSa7F11)
Bit 1: Sa7 Bit of Frame 13 (RSa7F13)
Bit 0: Sa7 Bit of Frame 15 (RSa7F15)
Register Name:
Register Description:
Register Address:
TR.RSa8
Received Sa8 Bits
CFh
Bit #
Name
Default
6
RSa8F3
0
7
RSa8F1
0
5
RSa8F5
0
Bit 7: Sa8 Bit of Frame 1 (RSa8F1)
Bit 6: Sa8 Bit of Frame 3 (RSa8F3)
Bit 5: Sa8 Bit of Frame 5 (RSa8F5)
Bit 4: Sa8 Bit of Frame 7 (RSa8F7)
Bit 3: Sa8 Bit of Frame 9 (RSa8F9)
Bit 2: Sa8 Bit of Frame 11 (RSa8F11)
Bit 1: Sa8 Bit of Frame 13 (RSa8F13)
Bit 0: Sa8 Bit of Frame 15 (RSa8F15)
278 of 333
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
Register Name:
Register Description:
Register Address:
Bit #
Name
Default
TR.TAF
Transmit Align Frame Register
D0h
7
Si
0
6
0
0
5
0
0
4
1
1
3
1
1
2
0
0
1
1
1
0
1
1
3
Sa5
0
2
Sa6
0
1
Sa7
0
0
Sa8
0
Bit 7: International Bit (Si)
Bit 6: Frame Alignment Signal Bit (0)
Bit 5: Frame Alignment Signal Bit (0)
Bit 4: Frame Alignment Signal Bit (1)
Bit 3: Frame Alignment Signal Bit (1)
Bit 2: Frame Alignment Signal Bit (0)
Bit 1: Frame Alignment Signal Bit (1)
Bit 0: Frame Alignment Signal Bit (1)
Register Name:
Register Description:
Register Address:
Bit #
Name
Default
TR.TNAF
Transmit Nonalign Frame Register
D1h
7
Si
0
6
1
1
5
A
0
4
Sa4
0
Bit 7: International Bit (Si)
Bit 6: Frame Nonalignment Signal Bit (1)
Bit 5: Remote Alarm [used to transmit the alarm (A)]
Bit 4: Additional Bit 4 (Sa4)
Bit 3: Additional Bit 5 (Sa5)
Bit 2: Additional Bit 6 (Sa6)
Bit 1: Additional Bit 7 (Sa7)
Bit 0: Additional Bit 8 (Sa8)
279 of 333
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
Register Name:
Register Description:
Register Address:
Bit #
Name
Default
7
TSiF0
0
TR.TSiAF
Transmit Si Bits of the Align Frame
D2h
6
TSiF2
0
5
TSiF4
0
4
TSiF6
0
3
TSiF8
0
2
TSiF10
0
1
TSiF12
0
0
TSiF14
0
2
TSiF11
0
1
TSiF13
0
0
TSiF15
0
Bit 7: Si Bit of Frame 0 (TSiF0)
Bit 6: Si Bit of Frame 2 (TSiF2)
Bit 5: Si Bit of Frame 4 (TSiF4)
Bit 4: Si Bit of Frame 6 (TSiF6)
Bit 3: Si Bit of Frame 8 (TSiF8)
Bit 2: Si Bit of Frame 10 (TSiF10)
Bit 1: Si Bit of Frame 12 (TSiF12)
Bit 0: Si Bit of Frame 14 (TSiF14)
Register Name:
Register Description:
Register Address:
Bit #
Name
Default
7
TSiF1
0
TR.TSiNAF
Transmit Si Bits of the Nonalign Frame
D3h
6
TSiF3
0
5
TSiF5
0
4
TSiF7
0
Bit 7: Si Bit of Frame 1 (TSiF1)
Bit 6: Si Bit of Frame 3 (TSiF3)
Bit 5: Si Bit of Frame 5 (TSiF5)
Bit 4: Si Bit of Frame 7 (TSiF7)
Bit 3: Si Bit of Frame 9 (TSiF9)
Bit 2: Si Bit of Frame 11 (TSiF11)
Bit 1: Si Bit of Frame 13 (TSiF13)
Bit 0: Si Bit of Frame 15 (TSiF15)
280 of 333
3
TSiF9
0
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
Register Name:
Register Description:
Register Address:
TR.TRA
Transmit Remote Alarm
D4h
Bit #
Name
Default
6
TRAF3
0
7
TRAF1
0
5
TRAF5
0
4
TRAF7
0
3
TRAF9
0
2
TRAF11
0
1
TRAF13
0
0
TRAF15
0
4
TSa4F7
0
3
TSa4F9
0
2
TSa4F11
0
1
TSa4F13
0
0
TSa4F15
0
Bit 7: Remote Alarm Bit of Frame 1 (TRAF1)
Bit 6: Remote Alarm Bit of Frame 3 (TRAF3)
Bit 5: Remote Alarm Bit of Frame 5 (TRAF5)
Bit 4: Remote Alarm Bit of Frame 7 (TRAF7)
Bit 3: Remote Alarm Bit of Frame 9 (TRAF9)
Bit 2: Remote Alarm Bit of Frame 11 (TRAF11)
Bit 1: Remote Alarm Bit of Frame 13 (TRAF13)
Bit 0: Remote Alarm Bit of Frame 15 (TRAF15)
Register Name:
Register Description:
Register Address:
TR.TSa4
Transmit Sa4 Bits
D5h
Bit #
Name
Default
6
TSa4F3
0
7
TSa4F1
0
5
TSa4F5
0
Bit 7: Sa4 Bit of Frame 1 (TSa4F1)
Bit 6: Sa4 Bit of Frame 3 (TSa4F3)
Bit 5: Sa4 Bit of Frame 5 (TSa4F5)
Bit 4: Sa4 Bit of Frame 7 (TSa4F7)
Bit 3: Sa4 Bit of Frame 9 (TSa4F9)
Bit 2: Sa4 Bit of Frame 11 (TSa4F11)
Bit 1: Sa4 Bit of Frame 13 (TSa4F13)
Bit 0: Sa4 Bit of Frame 15 (TSa4F15)
281 of 333
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
Register Name:
Register Description:
Register Address:
TR.TSa5
Transmitted Sa5 Bits
D6h
Bit #
Name
Default
6
TSa5F3
0
7
TSa5F1
0
5
TSa5F5
0
4
TSa5F7
0
3
TSa5F9
0
2
TSa5F11
0
1
TSa5F13
0
0
TSa5F15
0
4
TSa6F7
0
3
TSa6F9
0
2
TSa6F11
0
1
TSa6F13
0
0
TSa6F15
0
Bit 7: Sa5 Bit of Frame 1 (TSa5F1)
Bit 6: Sa5 Bit of Frame 3 (TSa5F3)
Bit 5: Sa5 Bit of Frame 5 (TSa5F5)
Bit 4: Sa5 Bit of Frame 7 (TSa5F7)
Bit 3: Sa5 Bit of Frame 9 (TSa5F9)
Bit 2: Sa5 Bit of Frame 11 (TSa5F11)
Bit 1: Sa5 Bit of Frame 13 (TSa5F13)
Bit 0: Sa5 Bit of Frame 15 (TSa5F15)
Register Name:
Register Description:
Register Address:
TR.TSa6
Transmit Sa6 Bits
D7h
Bit #
Name
Default
6
TSa6F3
0
7
TSa6F1
0
5
TSa6F5
0
Bit 7: Sa6 Bit of Frame 1 (TSa6F1)
Bit 6: Sa6 Bit of Frame 3 (TSa6F3)
Bit 5: Sa6 Bit of Frame 5 (TSa6F5)
Bit 4: Sa6 Bit of Frame 7 (TSa6F7)
Bit 3: Sa6 Bit of Frame 9 (TSa6F9)
Bit 2: Sa6 Bit of Frame 11 (TSa6F11)
Bit 1: Sa6 Bit of Frame 13 (TSa6F13)
Bit 0: Sa6 Bit of Frame 15 (TSa6F15)
282 of 333
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
Register Name:
Register Description:
Register Address:
TR.TSa7
Transmit Sa7 Bits
D8h
Bit #
Name
Default
6
TSa7F3
0
7
TSa7F1
0
5
TSa7F5
0
4
TSa7F7
0
3
TSa7F9
0
2
TSa7F11
0
1
TSa7F13
0
0
TSa7F15
0
4
TSa8F7
0
3
TSa8F9
0
2
TSa8F11
0
1
TSa8F13
0
0
TSa8F15
0
Bit 7: Sa7 Bit of Frame 1 (TSa4F1)
Bit 6: Sa7 Bit of Frame 3 (TSa7F3)
Bit 5: Sa7 Bit of Frame 5 (TSa7F5)
Bit 4: Sa7 Bit of Frame 7 (TSa7F7)
Bit 3: Sa7 Bit of Frame 9 (TSa7F9)
Bit 2: Sa7 Bit of Frame 11 (TSa7F11)
Bit 1: Sa7 Bit of Frame 13 (TSa7F13)
Bit 0: Sa7 Bit of Frame 15 (TSa7F15)
Register Name:
Register Description:
Register Address:
TR.TSa8
Transmit Sa8 Bits
D9h
Bit #
Name
Default
6
TSa8F3
0
7
TSa8F1
0
5
TSa8F5
0
Bit 7: Sa8 Bit of Frame 1 (TSa8F1)
Bit 6: Sa8 Bit of Frame 3 (TSa8F3)
Bit 5: Sa8 Bit of Frame 5 (TSa8F5)
Bit 4: Sa8 Bit of Frame 7 (TSa8F7)
Bit 3: Sa8 Bit of Frame 9 (TSa8F9)
Bit 2: Sa8 Bit of Frame 11 (TSa8F11)
Bit 1: Sa8 Bit of Frame 13 (TSa8F13)
Bit 0: Sa8 Bit of Frame 15 (TSa8F15)
283 of 333
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
Register Name:
Register Description:
Register Address:
Bit #
Name
Default
7
SiAF
0
TR.TSACR
Transmit Sa Bit Control Register
DAh
6
SiNAF
0
5
RA
0
4
Sa4
0
3
Sa5
0
2
Sa6
0
1
Sa7
0
0
Sa8
0
1
ACNT1
0
0
ACNT0
0
Bit 7: International Bit in Align Frame Insertion Control Bit (SiAF)
0 = do not insert data from the TR.TSiAF register into the transmit data stream
1 = insert data from the TR.TSiAF register into the transmit data stream
Bit 6: International Bit in Nonalign Frame Insertion Control Bit (SiNAF)
0 = do not insert data from the TR.TSiNAF register into the transmit data stream
1 = insert data from the TR.TSiNAF register into the transmit data stream
Bit 5: Remote Alarm Insertion Control Bit (RA)
0 = do not insert data from the TR.TRA register into the transmit data stream
1 = insert data from the TR.TRA register into the transmit data stream
Bit 4: Additional Bit 4 Insertion Control Bit (Sa4)
0 = do not insert data from the TR.TSa4 register into the transmit data stream
1 = insert data from the TR.TSa4 register into the transmit data stream
Bit 3: Additional Bit 5 Insertion Control Bit (Sa5)
0 = do not insert data from the TR.TSa5 register into the transmit data stream
1 = insert data from the TR.TSa5 register into the transmit data stream
Bit 2: Additional Bit 6 Insertion Control Bit (Sa6)
0 = do not insert data from the TR.TSa6 register into the transmit data stream
1 = insert data from the TR.TSa6 register into the transmit data stream
Bit 1: Additional Bit 7 Insertion Control Bit (Sa7)
0 = do not insert data from the TR.TSa7 register into the transmit data stream
1 = insert data from the TR.TSa7 register into the transmit data stream
Bit 0: Additional Bit 8 Insertion Control Bit (Sa8)
0 = do not insert data from the TR.TSa8 register into the transmit data stream
1 = insert data from the TR.TSa8 register into the transmit data stream
Register Name:
Register Description:
Register Address:
TR.BAWC
BERT Alternating Word-Count Rate
DBh
Bit #
Name
Default
6
ACNT6
0
7
ACNT7
0
5
ACNT5
0
4
ACNT4
0
3
ACNT3
0
2
ACNT2
0
Bits 7 to 0: Alternating Word-Count Rate Bits 7 to 0 (ACNT7 to ACNT0). ACNT0 is the LSB of the 8-bit
alternating word-count rate counter.
284 of 333
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
Register Name:
Register Description:
Register Address:
TR.BRP1
BERT Repetitive Pattern Set Register 1
DCh
Bit #
Name
Default
6
RPAT6
0
7
RPAT7
0
5
RPAT5
0
4
RPAT4
0
3
RPAT3
0
2
RPAT2
0
1
RPAT1
0
0
RPAT0
0
Bits 7 to 0: BERT Repetitive Pattern Set Bits 7 to 0 (RPAT7 to RPAT0). RPAT0 is the LSB of the 32-bit
repetitive pattern set.
Register Name:
Register Description:
Register Address:
TR.BRP2
BERT Repetitive Pattern Set Register 2
DDh
Bit #
Name
Default
6
RPAT14
0
7
RPAT15
0
5
RPAT13
0
4
RPAT12
0
3
RPAT11
0
2
RPAT10
0
1
RPAT9
0
0
RPAT8
0
2
RPAT18
0
1
RPAT17
0
0
RPAT16
0
1
RPAT25
0
0
RPAT24
0
Bits 7 to 0: BERT Repetitive Pattern Set Bits 15 to 8 (RPAT15 to RPAT8)
Register Name:
Register Description:
Register Address:
TR.BRP3
BERT Repetitive Pattern Set Register 3
DEh
Bit #
Name
Default
6
RPAT22
0
7
RPAT23
0
5
RPAT21
0
4
RPAT20
0
3
RPAT19
0
Bits 7 to 0: BERT Repetitive Pattern Set Bits 23 to 16 (RPAT23 to RPAT16)
Register Name:
Register Description:
Register Address:
TR.BRP4
BERT Repetitive Pattern Set Register 4
DFh
Bit #
Name
Default
6
RPAT30
0
7
RPAT31
0
5
RPAT29
0
4
RPAT28
0
3
RPAT27
0
2
RPAT26
0
Bits 7 to 0: BERT Repetitive Pattern Set Bits 31 to 24 (RPAT31 to RPAT24). RPAT31 is the LSB of the 32-bit
repetitive pattern set.
285 of 333
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
Register Name:
Register Description:
Register Address:
Bit #
Name
Default
7
TC
0
TR.BC1
BERT Control Register 1
E0h
6
TINV
0
5
RINV
0
4
PS2
0
3
PS1
0
2
PS0
0
1
LC
0
0
RESYNC
0
Bit 7: Transmit Pattern Load (TC). A low-to-high transition loads the pattern generator with the pattern that is to
be generated. This bit should be toggled from low to high whenever the host wishes to load a new pattern. Must be
cleared and set again for subsequent loads.
Bit 6: Transmit Invert-Data Enable (TINV)
0 = do not invert the outgoing data stream
1 = invert the outgoing data stream
Bit 5: Receive Invert-Data Enable (RINV)
0 = do not invert the incoming data stream
1 = invert the incoming data stream
Bits 4 to 2: Pattern Select Bits (PS2 to PS0)
PS2
PS1
PS0
Pattern Definition
0
0
0
0
0
1
0
1
0
0
1
1
1
1
0
0
0
1
1
1
0
1
1
1
Pseudorandom 2E7 - 1
Pseudorandom 2E11 - 1
Pseudorandom 2E15 - 1
Pseudorandom pattern QRSS. A 220 - 1 pattern with 14 consecutive zero
restrictions.
Repetitive pattern
Alternating word pattern
Modified 55 octet (Daly) pattern. The Daly pattern is a repeating 55 octet
pattern that is byte-aligned into the active DS0 time slots. The pattern is
defined in an ATIS (Alliance for Telecommunications Industry Solutions)
Committee T1 Technical Report Number 25 (November 1993).
Pseudorandom 2E9 – 1
Bit 1: Load Bit and Error Counters (LC). A low-to-high transition latches the current bit and error counts into
registers TR.BBC1/TR.BBC2/TR.BBC3/TR.BBC4 and TR.BEC1/TR.BEC2/TR.BEC3 and clears the internal count.
This bit should be toggled from low to high whenever the host wishes to begin a new acquisition period. Must be
cleared and set again for subsequent loads.
Bit 0: Force Resynchronization (RESYNC). A low-to-high transition forces the receive BERT synchronizer to
resynchronize to the incoming data stream. This bit should be toggled from low to high whenever the host wishes
to acquire synchronization on a new pattern. Must be cleared and set again for a subsequent resynchronization.
286 of 333
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
Register Name:
Register Description:
Register Address:
Bit #
Name
Default
7
EIB2
0
TR.BC2
BERT Control Register 2
E1h
6
EIB1
0
5
EIB0
0
4
SBE
0
3
RPL3
0
2
RPL2
0
1
RPL1
0
0
RPL0
0
Bits 7 to 5: Error Insert Bits 2 to 0 (EIB2 to EIB0). Automatically inserts bit errors at the prescribed rate into the
generated data pattern. Can be used for verifying error-detection features.
EIB2
0
0
0
0
1
1
1
1
EIB1
0
0
1
1
0
0
1
1
EIB0
0
1
0
1
0
1
0
1
Error Rate Inserted
No errors automatically inserted
10E-1
10E-2
10E-3
10E-4
10E-5
10E-6
10E-7
Bit 4: Single Bit-Error Insert (SBE). A low-to-high transition creates a single-bit error. Must be cleared and set
again for a subsequent bit error to be inserted.
Bits 3 to 0: Repetitive Pattern Length Bit 3 (RPL3 to RPL0). RPL0 is the LSB and RPL3 is the MSB of a nibble
that describes how long the repetitive pattern is. The valid range is 17 (0000) to 32 (1111). These bits are ignored if
the receive BERT is programmed for a pseudorandom pattern. To create repetitive patterns fewer than 17 bits in
length, the user must set the length to an integer number of the desired length that is less than or equal to 32. For
example, to create a 6-bit pattern, the user can set the length to 18 (0001) or to 24 (0111) or to 30 (1101).
Length
(bits)
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
RPL3
RPL2
RPL1
RPL0
0
0
0
0
0
0
0
0
1
1
1
1
1
1
1
1
0
0
0
0
1
1
1
1
0
0
0
0
1
1
1
1
0
0
1
1
0
0
1
1
0
0
1
1
0
0
1
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
287 of 333
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
Register Name:
Register Description:
Register Address:
Bit #
Name
Default
7
BBC7
0
TR.BBC1
BERT Bit Count Register 1
E3h
6
BBC6
0
5
BBC5
0
4
BBC4
0
3
BBC3
0
2
BBC2
0
1
BBC1
0
0
BBC0
0
Bits 7 to 0: BERT Bit Counter Bits 7 to 0 (BBC7 to BBC0). BBC0 is the LSB of the 32-bit counter.
Register Name:
Register Description:
Register Address:
TR.BBC2
BERT Bit Count Register 2
E4h
Bit #
Name
Default
6
BBC14
0
7
BBC15
0
5
BBC13
0
4
BBC12
0
3
BBC11
0
2
BBC10
0
1
BBC9
0
0
BBC8
0
3
BBC19
0
2
BBC18
0
1
BBC17
0
0
BBC16
0
3
BBC27
0
2
BBC26
0
1
BBC25
0
0
BBC24
0
Bits 7 to 0: BERT Bit Counter Bits 15 to 8 (BBC15 to BBC8)
Register Name:
Register Description:
Register Address:
TR.BBC3
BERT Bit Count Register 3
E5h
Bit #
Name
Default
6
BBC22
0
7
BBC23
0
5
BBC21
0
4
BBC20
0
Bits 7 to 0: BERT Bit Counter Bits 23 to 16 (BBC23 to BBC16)
Register Name:
Register Description:
Register Address:
TR.BBC4
BERT Bit Count Register 4
E6h
Bit #
Name
Default
6
BBC30
0
7
BBC31
0
5
BBC29
0
4
BBC28
0
Bits 7 to 0: BERT Bit Counter Bits 31 to 24 (BBC31 to BBC24). BBC31 is the MSB of the 32-bit counter.
288 of 333
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
Register Name:
Register Description:
Register Address:
Bit #
Name
Default
7
EC7
0
TR.BEC1
BERT Error-Count Register 1
E7h
6
EC6
0
5
EC5
0
4
EC4
0
3
EC3
0
2
EC2
0
1
EC1
0
0
EC0
0
Bits 7 to 0: Error Counter Bits 7 to 0 (EC7 to EC0). EC0 is the LSB of the 24-bit counter.
Register Name:
Register Description:
Register Address:
Bit #
Name
Default
7
EC15
0
TR.BEC2
BERT Error-Count Register 2
E8h
6
EC14
0
5
EC13
0
4
EC12
0
3
EC11
0
2
EC10
0
1
EC9
0
0
EC8
0
3
EC19
0
2
EC18
0
1
EC17
0
0
EC16
0
Bits 7 to 0: Error Counter Bits 15 to 8 (EC15 to EC8)
Register Name:
Register Description:
Register Address:
Bit #
Name
Default
7
EC23
0
TR.BEC3
BERT Error-Count Register 3
E9h
6
EC22
0
5
EC21
0
4
EC20
0
Bits 7 to 0: Error Counter Bits 23 to 16 (EC23 to EC16). EC0 is the MSB of the 24-bit counter.
289 of 333
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
Register Name:
Register Description:
Register Address:
Bit #
Name
Default
7
—
0
TR.BIC
BERT Interface Control Register
EAh
6
RFUS
0
5
—
0
4
TBAT
0
3
TFUS
0
2
—
0
1
BERTDIR
0
0
BERTEN
0
Bit 6: Receive Framed/Unframed Select (RFUS)
0 = BERT is not sent data from the F-bit position (framed)
1 = BERT is sent data from the F-bit position (unframed)
Bit 4: Transmit Byte-Align Toggle (TBAT). A 0-to-1 transition forces the BERT to byte align its pattern with the
transmit formatter. This bit must be transitioned in order to byte align the Daly pattern.
Bit 3: Transmit Framed/Unframed Select (TFUS)
0 = BERT does not source data into the F-bit position (framed)
1 = BERT does source data into the F-bit position (unframed)
Bit 1: BERT Direction (BERTDIR)
0 = network
BERT transmits toward the network (TTIP and TRING) and receives from the network (RTIP and RRING). The
BERT pattern can be looped back to the receiver internally by using the framer loopback function.
1 = system
BERT transmits toward the system backplane (RSERO) and receives from the system backplane (TSERI).
Bit 0: BERT Enable (BERTEN)
0 = BERT disabled
1 = BERT enabled
290 of 333
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
Register Name:
Register Description:
Register Address:
Bit #
Name
Default
7
WNOE
0
TR.ERC
Error-Rate Control Register
EBh
6
—
0
5
—
0
4
CE
0
3
ER3
0
2
ER2
0
1
ER1
0
0
ER0
0
Bit 7: Write NOE Registers (WNOE). If the host wishes to update to the TR.NOEx registers, this bit must be
toggled from a 0 to a 1 after the host has already loaded the prescribed error count into the TR.NOEx registers.
The toggling of this bit causes the error count loaded into the TR.NOEx registers to be loaded into the errorinsertion circuitry on the next clock cycle. Subsequent updates require that the WNOE bit be set to 0 and then 1
once again.
Bit 4: Constant Errors (CE). When this bit is set high (and the ER0 to ER3 bits are not set to 0000), the errorinsertion logic ignores the number-of-error registers (TR.NOE1, TR.NOE2) and generates errors constantly at the
selected insertion rate. When CE is set to 0, the TR.NOEx registers determine how many errors are to be inserted.
Bits 3 to 0: Error-Insertion Rate Select Bits (ER3 to ER0)
ER3
0
0
0
0
0
0
0
0
1
1
1
1
1
1
1
1
ER2
0
0
0
0
1
1
1
1
0
0
0
0
1
1
1
1
ER1
0
0
1
1
0
0
1
1
0
0
1
1
0
0
1
1
ER0
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
Error Rate
No errors inserted
1 in 16
1 in 32
1 in 64
1 in 128
1 in 256
1 in 512
1 in 1024
1 in 2048
1 in 4096
1 in 8192
1 in 16,384
1 in 32,768
1 in 65,536
1 in 131,072
1 in 262,144
291 of 333
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
Register Name:
Register Description:
Register Address:
Bit #
Name
Default
7
C7
0
TR.NOE1
Number-of-Errors 1
ECh
6
C6
0
5
C5
0
4
C4
0
3
C3
0
2
C2
0
1
C1
0
0
C0
0
Bits 7 to 0: Number-of-Errors Counter Bits 7 to 0 (C7 to C0). Bit C0 is the LSB of the 10-bit counter.
Register Name:
Register Description:
Register Address:
Bit #
Name
Default
7
—
0
TR.NOE2
Number-of-Errors 2
EDh
6
—
0
5
—
0
4
—
0
3
—
0
2
—
0
1
C9
0
0
C8
0
Bits 1 and 0: Number-of-Errors Counter Bits 9 and 8 (C9 and C8). Bit C9 is the MSB of the 10-bit counter.
12.7.1 Number-of-Errors Left Register
The host can read the TR.NOELx registers at any time to determine how many errors are left to be inserted.
Register Name:
Register Description:
Register Address:
Bit #
Name
Default
7
C7
0
TR.NOEL1
Number-of-Errors Left 1
EEh
6
C6
0
5
C5
0
4
C4
0
3
C3
0
2
C2
0
1
C1
0
0
C0
0
Bits 7 to 0: Number-of-Errors Left Counter Bits 7 to 0 (C7 to C0). Bit C0 is the LSB of the 10-bit counter.
Register Name:
Register Description:
Register Address:
Bit #
Name
Default
7
—
0
TR.NOEL2
Number-of-Errors Left 2
EFh
6
—
0
5
—
0
4
—
0
3
—
0
2
—
0
1
C9
0
0
C8
0
Bits 1 and 0: Number-of-Errors Left Counter Bits 9 and 8 (C9 and C8). Bit C9 is the MSB of the 10-bit counter.
292 of 333
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
13 FUNCTIONAL TIMING
13.1 MII and RMII Interfaces
Each MII Interface Transmit Port has its own TX_CLK and data interface. The data TXD [3:0] operates
synchronously with TX_CLK. The LSB is presented first. TX_CLK should be 2.5MHz for 10Mbps operation and
25MHz for 100Mbps operation. TX_EN is valid at the same time as the first byte of the preamble. In DTE Mode
TX_CLK is input from the external PHY. In DCE Mode, the device provides TX_CLK, derived from an external
reference (SYSCLKI).
In Half-Duplex (DTE) Mode, the device supports CRS and COL signals. CRS is active when the PHY detects
transmit or receive activity. If there is a collision as indicated by the COL input, the device will replace the data
nibbles with jam nibbles. After a “random“ time interval, the packet is retransmitted. The MAC will try to send the
packet a maximum of 16 times. The jam sequence consists of 55555555h. Note that the COL signal and CRS can
be asynchronous to the TX_CLK and are only valid in half duplex mode.
Figure 13-1. MII Transmit Functional Timing
TX_CLK
P
TXD[3:0]
R
E
A
E
M
B
L
E
F
C
TX_EN
Figure 13-2. MII Transmit Half Duplex with a Collision Functional Timing
TX_CLK
TXD[3:0]
P
R
E
A
M
B
L
E
J
J
J
J
J
TX_EN
CRS
COL
293 of 333
J
J
J
S
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
Receive Data (RXD[3:0]) is clocked from the external PHY synchronously with RX_CLK. The RX_CLK signal is
2.5MHz for 10Mbps operation and 25MHz for 100Mbps operation. RX_DV is asserted by the PHY from the first
Nibble of the preamble in 100Mbps operation or first nibble of SFD for 10Mbps operation. The data on RXD[3:0] is
not accepted by the MAC if RX_DV is low or RX_ERR is high (in DTE mode). RX_ERR should be tied low when in
DCE Mode.
Figure 13-3. MII Receive Functional Timing
RX_CLK
P
RXD[3:0]
R
E
A
E
M
B
L
E
F
C
S
RX_DV
In RMII Mode, TX_EN is high with the first bit of the preamble. The TXD[1:0] is synchronous with the 50MHz
REF_CLK. For 10Mbps operation, the data bit outputs are updated every 10 clocks.
Figure 13-4. RMII Transmit Interface Functional Timing
REFCLK
TXD[1:0]
P
R
E
A
M
B
L
E
F
C
S
TX_EN
RMII Receive data on RXD[1:0] is expected to be synchronous with the rising edge of the 50MHz REF_CLK. The
data is only valid if CRS_DV is high. The external PHY asynchronously drives CRS_DV low during carrier loss.
Figure 13-5. RMII Receive Interface Functional Timing
REFCLK
RXD[1:0]
P
R
E
A
M
B
L
E
F
CRS_DV
294 of 333
C
S
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
13.2 T1 Mode
Figure 13-6. Receive Side D4 Timing
1
FRAME#
2
3
4
5
6
7
8
9
10
11
12
1
2
3
4
5
RFSYNC
RSYNC 1
RSYNC 2
3
RSYNC
NOTES:
1) RSYNC in the frame mode (TR.IOCR1.5 = 0) and double-wide frame sync is not enabled (TR.IOCR1.6 = 0).
2) RSYNC in the frame mode (TR.IOCR1.5 = 0) and double-wide frame sync is enabled (TR.IOCR1.6 = 1).
3) RSYNC in the multiframe mode (TR.IOCR1.5 = 1).
Figure 13-7. Receive Side ESF Timing
FRAME#
1
2
3
4
5
6
7
8
9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 1
2
3
4
5
1
RSYNC
RFSYNC
RSYNC
RSYNC
2
3
NOTES:
1) RSYNC in frame mode (TR.IOCR1.4 = 0) and double-wide frame sync is not enabled (TR.IOCR1.6 = 0).
2) RSYNC in frame mode (TR.IOCR1.4 = 0) and double-wide frame sync is enabled (TR.IOCR1.6 = 1).
3) RSYNC in multiframe mode (TR.IOCR1.4 = 1).
295 of 333
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
Figure 13-8. Receive Side 1.544MHz Boundary Timing (With Elastic Store Enabled)
RSYSCLK
CHANNEL 23
RSERO
CHANNEL 24
CHANNEL 1
F
LSB
LSB MSB
MSB
RSYNC1
RMSYNC
2
RSYNC
RSIG
CHANNEL 23
A
B C/A D/B
CHANNEL 1
CHANNEL 24
A
B C/A D/B
A
RCHCLK
3
RCHBLK
NOTES:
1) RSYNC is in the output mode (TR.IOCR1.4 = 0).
2) RSYNC is in the input mode (TR.IOCR1.4 = 1).
3) RCHBLK is programmed to block channel 24.
Figure 13-9. Receive Side 2.048MHz Boundary Timing (With Elastic Store Enabled)
RSYSCLK
1
CHANNEL 31
RSERO
RSYNC
CHANNEL 32
CHANNEL 1
LSB
LSB MSB
2
RMSYNC
3
RSYNC
RSIG
A
CHANNEL 31
B C/A D/B
A
CHANNEL 32
B C/A D/B
RCHCLK
RCHBLK
4
NOTES:
1) RSERO data in channels 1, 5, 9, 13, 17, 21, 25, and 29 are forced to one.
2) RSYNC is in the output mode (TR.IOCR1.4 = 0).
3) RSYNC is in the input mode (TR.IOCR1.4 = 1).
4) RCHBLK is forced to one in the same channels as RSERO (Note 1).
5) The F-bit position is passed through the receive-side elastic store.
296 of 333
CHANNEL 1
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
Figure 13-10. Transmit Side D4 Timing
FRAME#
1
2
3
4
5
6
7
8
9
10
11
12
1
2
3
4
5
1
TSYNC
TSSYNC
2
TSYNC
3
TSYNC
NOTES:
1) TSYNC in the frame mode (TR.IOCR1.2 = 0) and double-wide frame sync is not enabled (TR.IOCR1.1 = 0).
2) TSYNC in the frame mode (TR.IOCR1.2 = 0) and double-wide frame sync is enabled (TR.IOCR1.1 = 1).
3) TSYNC in the multiframe mode (TR.IOCR1.2 = 1).
Figure 13-11. Transmit Side ESF Timing
FRAME#
1
2
3
4
5
6
7
8
9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 1
2
3
4
5
TSYNC1
TSSYNC
TSYNC
2
3
TSYNC
NOTES:
1) TSYNC in frame mode (TR.IOCR1.2 = 0) and double-wide frame sync is not enabled (TR.IOCR1.3 = 0).
2) TSYNC in frame mode (TR.IOCR1.2 = 0) and double-wide frame sync is enabled (TR.IOCR1.3 = 1).
3) TSYNC in multiframe mode (TR.IOCR1.2 = 1).
297 of 333
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
Figure 13-12. Transmit Side 1.544MHz Boundary Timing (With Elastic Store Enabled)
TSYSCLK
CHANNEL 23
CHANNEL 24
CHANNEL 1
LSB MSB
TSERI
LSB
F
MSB
TSSYNC
CHANNEL 23
A
TSIG
B
CHANNEL 24
C/A D/B
A
CHANNEL 1
B
C/A D/B
A
TCHCLK
TCHBLK 1
NOTE:
1) TCHBLK is programmed to block channel 24 (if the TPCSI bit is set, then the signaling data at TSIG will be
ignored during channel 24).
Figure 13-13. Transmit Side 2.048MHz Boundary Timing (With Elastic Store Enabled)
TSYSCLK
CHANNEL 31
TSERI
1
CHANNEL 32
LSB MSB
CHANNEL 1
LSB
F
4
TSSYNC
CHANNEL 31
TSIG
A
B
CHANNEL 32
C/A D/B
A
B
CHANNEL 1
C/A D/B
A
TCHCLK
TCHBLK 2,3
NOTES:
1) TSERI data in channels 1, 5, 9, 13, 17, 21, 25, and 29 is ignored.
2) TCHBLK is programmed to block channel 31 (if the TPCSI bit is set, then the signaling data at TSIG will be
ignored).
3) TCHBLK is forced to one in the same channels as TSERI is ignored (Note 1).
4) The F-bit position for the T1 frame is sampled and passed through the transmit side elastic store into the MSB
bit position of channel 1. (Normally the transmit side formatter overwrites the F-bit position unless the formatter
is programmed to pass-through the F-bit position).
298 of 333
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
13.3 E1 Mode
Figure 13-14. Receive Side Timing
1
FRAME#
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
1
RFSYNC
RSYNC
1
RSYNC
2
NOTES:
1) RSYNC in frame mode (TR.IOCR1.5 = 0).
2) RSYNC in multiframe mode (TR.IOCR1.5 = 1).
3) This diagram assumes the CAS MF begins in the RAF frame.
Figure 13-15. Receive Side Boundary Timing, RSYSCLK = 1.544MHz
(With Elastic Store Enabled)
RSYSCLK
CHANNEL 23/31
1
RSERO
CHANNEL 24/32
CHANNEL 1/2
LSB
LSB MSB
F
MSB
RSYNC2
RMSYNC
3
RSYNC
RCHCLK
RCHBLK
4
NOTES:
1) Data from the E1 channels 1, 5, 9, 13, 17, 21, 25, and 29 is dropped (channel 2 from the E1 link is mapped to
channel 1 of the T1 link, etc.) and the F-bit position is added (forced to one).
2) RSYNC in the output mode (TR.IOCR1.4 = 0).
3) RSYNC in the input mode (TR.IOCR1.4 = 1).
4) RCHBLK is programmed to block channel 24.
299 of 333
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
Figure 13-16. Receive Side Boundary Timing, RSYSCLK = 2.048MHz
(With Elastic Store Enabled)
RSYSCLK
CHANNEL 31
RSERO
CHANNEL 32
LSB MSB
CHANNEL 1
LSB MSB
1
RSYNC
RMSYNC
RSYNC
2
RSIG
CHANNEL 1
CHANNEL 32
C
A
B
D
CHANNEL 31
C
A
B
D
Note 4
RCHCLK
RCHBLK
3
NOTES:
1) RSYNC is in the output mode (TR.IOCR1.4 = 0).
2) RSYNC is in the input mode (TR.IOCR1.4 = 1).
3) RCHBLK is programmed to block channel 1.
4) RSIG normally contains the CAS multiframe-alignment nibble (0000) in channel 1.
Figure 13-17. Receive IBO Channel Interleave Mode Timing
LINK #1, CHANNEL #1
RSYNC
RSERO
L3 C32
L4 C32
L1 C1
L2 C1
L3 C1
L4 C1
L1 C2
L2 C2
L3 C2
L4 C2
BIT LEVEL DETAIL
RCLKI
RSYNC
LINK 4, CHANNEL 32
RSERO
LINK 2, CHANNEL 1
LINK 1, CHANNEL 1
LSB MSB
LSB MSB
NOTES:
1) 8.192MHz bus configuration.
2) Data on unused channels is ignored.
300 of 333
LSB
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
Figure 13-18. G.802 Timing, E1 Mode Only
TS #
31 32 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 0 1 2
RSYNC
TSYNC
RCHCLK
TCHCLK
RCHBLK
TCHBLK
RCLKO / RSYSCLK
TCLKT / TSYSCLK
CHANNEL 25
RSERO / TSERI
CHANNEL 26
LSB MSB
RCHCLK / TCHCLK
RCHBLK / TCHBLK
NOTES:
1) RCHBLK or TCHBLK programmed to pulse high during time slots 1 through 15, 17 through 25, and bit 1 of
time slot 26.
Figure 13-19. Transmit Side Timing
FRAME#
14 15 16 1
2
3
4
5 6
7
8
9 10 11 12 13 14 15 16 1
2
3
4
5
1
TSYNC
TSSYNC
TSYNC
2
NOTES:
1) TSYNC in frame mode (TR.IOCR1.2 = 0).
2) TSYNC in multiframe mode (TR.IOCR1.2 = 1).
3) This diagram assumes both the CAS MF and the CRC-4 MF begin with the TAF frame.
301 of 333
6
7
8
9 10
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
Figure 13-20. Transmit Side Boundary Timing (With Elastic Store Disabled)
TCLKT
CHANNEL 1
TSERI
LSB
Si
1
A
CHANNEL 2
Sa4 Sa5 Sa6 Sa7 Sa8 MSB
LSB MSB
TSYNC1
TSYNC2
CHANNEL 1
TSIG
CHANNEL 2
D
A
B
C
D
TCHCLK
TCHBLK 3
NOTES:
1) TSYNC is in the output mode (TR.IOCR1.1 = 1.)
2) TSYNC is in the input mode (TR.IOCR1.1 = 0).
3) TCHBLK is programmed to block channel 2.
4) The signaling data at TSIG during channel 1 is normally overwritten in the transmit formatter with the CAS
multiframe-alignment nibble (0000).
5) Shown is a TNAF frame boundary.
Figure 13-21. Transmit Side Boundary Timing, TSYSCLK = 1.544MHz
(With Elastic Store Enabled)
TSYSCLK
CHANNEL 23
TSERI
1
CHANNEL 24
LSB MSB
TSSYNC
TCHCLK
TCHBLK
CHANNEL 1
LSB
2
NOTES:
1) The F-bit position in the TSERI data is ignored.
2) TCHBLK is programmed to block channel 24.
302 of 333
F
MSB
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
Figure 13-22. Transmit Side Boundary Timing, TSYSCLK = 2.048MHz
(With Elastic Store Enabled)
TSYSCLK
CHANNEL 31
TSERI
CHANNEL 32
1
CHANNEL 1
LSB MSB
LSB
F
4
TSSYNC
CHANNEL 31
A
TSIG
B
CHANNEL 32
C
D
A
B
CHANNEL 1
C
D
A
TCHCLK
TCHBLK
NOTE:
1) TCHBLK is programmed to block channel 31.
Figure 13-23. Transmit IBO Channel Interleave Mode Timing
TSSYNC
TSERI
L3 CH32
L4 CH32
L1 CH1
L2 CH1
L3 CH1
L4 CH1
L1 CH2
L2 CH2
L3 CH2
L4 CH2
TSIG
L3 CH32
L4 CH32
L1 CH1
L2 CH1
L3 CH1
L4 CH1
L1 CH2
L2 CH2
L3 CH2
L4 CH2
BIT DETAIL
TSYSCLK
TSSYNC
LINK 1, CHANNEL 1
LINK 4, CHANNEL 32
TSERI
LSB MSB
LINK 4, CHANNEL 32
TSIG
A
B
LINK 2, CHANNEL 1
LSB MSB
LINK 2, CHANNEL 1
LINK 1, CHANNEL 1
C/A D/B
A
B
NOTE: UNUSED CHANNELS FILLED WITH FFH.
303 of 333
LSB
C/A D/B
A
B
C/A D/B
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
14 OPERATING PARAMETERS
ABSOLUTE MAXIMUM RATINGS
Voltage Range on Any Lead with Respect to VSS (except VDD)…………………………………….–0.5V to +5.5V
Supply Voltage Range (VDD3.3) with Respect to VSS………………………………………………….–0.3V to +3.6V
Supply Voltage Range (VDD1.8) with Respect to VSS………………………………………………….–0.3V to +2.0V
Ambient Operating Temperature Range……………………………………………………………..–40ºC to +85ºC
Junction Operating Temperature Range……………………………………………………………..40ºC to +125ºC
Storage Temperature………………………………………………………………………………….–55ºC to +125ºC
Soldering Temperature……………………………………………………………See IPC/J-STD-020 Specification
These are stress ratings only and functional operation of the device at these or any other conditions beyond those indicated in the operation
sections of this specification is not implied. Exposure to absolute maximum rating conditions for extended periods of time can affect reliability.
Ambient Operating Temperature Range is assuming the device is mounted on a JEDEC standard test board in a convection cooled JEDEC test
enclosure.
Note: The “typ” values listed below are not production tested.
Table 14-1. Recommended DC Operating Conditions
(VDD3.3 = 3.3V ±5%, VDD1.8 = 1.8V ± 5%, Tj = -40°C to +85°C.)
PARAMETER
Logic 1
Logic 0
Supply (VDD3.3) ±5%
Supply (VDD1.8) ±5%
SYMBOL
CONDITIONS
VIH
VIL
VDD3.3
VDD1.8
MIN
2.0
-0.3
3.135
1.71
TYP
MAX
UNITS
3.300
1.8
3.465
+0.75
3.465
1.89
V
V
V
V
MAX
UNITS
mA
mA
pF
+10
-10
+10
µA
µA
µA
V
V
V
V
Table 14-2. DC Electrical Characteristics
(VDD3.3 = 3.3V ±5%, VDD1.8 = 1.8V ±5%, Tj = -40°C to +85°C.)
PARAMETER
VDD3.3 Supply Current at 3.465V
VDD1.8 Supply Current at 1.89V
Lead Capacitance
Input Leakage
Input Leakage
Output Leakage (when Hi-Z)
Output Voltage (IOH = -1.0mA)
Output Voltage (IOL = +1.0mA)
Output Voltage (IOH = -8.0mA)
Output Voltage (IOL = +12.0mA)
Note 1:
Note 2:
Note 3:
Note 4:
SYMBOL
IDD3.3
IDD1.8
CIO
IIL
IILP
ILO
VOH
VOL
VOH
VOL
CONDITIONS
(Notes 1, 2, 3)
(Notes 1, 2)
(Note 4)
All outputs
All outputs
REF_CLKO
TSERO
MIN
-10
-50
-10
2.35
TYP
600
30
7
0.4
2.35
0.4
Typical power consumption is approximately 2 Watts.
All outputs loaded with rated capacitance; all inputs between VDD and VSS; inputs with pullups connected to VDD.
TCLKT = TCLKE = RCLKI = TSYSCLK = RSYSCLK = MCLK = 1.544MHz; outputs open circuited.
Value guaranteed by design (GBD).
304 of 333
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
14.1 Thermal Characteristics
Table 14-3. Thermal Characteristics
PARAMETER
Ambient Temperature (Note 1)
MIN
TYP
-40
Junction Temperature
Theta-JA (θJA) in Still Air for 400-Pin
27mm BGA (Notes 2, 3)
+15.1
MAX
UNITS
+85
°C
+125
°C
°C/W
Table 14-4. Theta-JA vs. Airflow
AIR FLOW
0m/s
1m/s
2.5m/s
Note 1:
Note 2:
Note 3:
THETA-JA
400-PIN 27mm BGA
15.1°C/W
13.3°C/W
12.3°C/W
NOTES
3
3
3
The package is mounted on a four-layer JEDEC standard test board.
Theta-JA (θJA) is the junction to ambient thermal resistance, when the package is mounted on a four-layer
JEDEC standard test board.
Value guaranteed by design (GBD).
305 of 333
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
14.2 MII Interface
Table 14-5. Transmit MII Interface
(Note 1, Figure 14-1)
PARAMETER
SYMBOL
MIN
10Mbps
TYP
MAX
100Mbps
TYP
MIN
40
UNITS
TX_CLK Period
t1
TX_CLK Low Time
t2
140
260
14
26
ns
TX_CLK High Time
t3
140
260
14
26
ns
TX_CLK to TXD, TX_EN
Delay
t4
0
20
0
20
ns
Note 1:
400
MAX
Timing parameters in this table are guaranteed by design (GBD).
Figure 14-1. Transmit MII Interface Timing
t1
TX_CLK
t2
t3
t4
TXD[3:0]
t4
TX_EN
306 of 333
ns
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
Table 14-6. Receive MII Interface
(Note 1, Figure 14-2)
PARAMETER
SYMBOL
MIN
10Mbps
TYP
MAX
100Mbps
TYP
MIN
t5
RX_CLK Low Time
t6
140
260
14
26
ns
RX_CLK High Time
t7
140
260
14
26
ns
t8
5
5
ns
t9
5
5
ns
Note 1:
40
UNITS
RX_CLK Period
RXD, RX_DV to RX_CLK
Setup Time
RX_CLK to RXD, RX_DV
Hold Time
400
MAX
ns
Timing parameters in this table are guaranteed by design (GBD).
Figure 14-2. Receive MII Interface Timing
t5
t7
RX_CLK
t6
t8
t9
RXD[3:0]
t9
t8
RX_DV
307 of 333
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
14.3 RMII Interface
Table 14-7. Transmit RMII Interface
(Note 1, Figure 14-3)
PARAMETER
SYMBOL
MIN
REF_CLK Frequency
10Mbps
TYP
50MHz
±50ppm
MAX
100Mbps
TYP
50MHz
±50ppm
MIN
20
UNITS
REF_CLK Period
t1
REF_CLK Low Time
t2
7
13
7
13
ns
REF_CLK High Time
t3
7
13
7
13
ns
REF_CLK to TXD,
TX_EN Delay
t4
5
10
5
10
ns
Note 1:
20
MAX
Timing parameters in this table are guaranteed by design (GBD).
Figure 14-3. Transmit RMII Interface Timing
t1
REF_CLK
t2
t3
t4
TXD[1:0]
t4
TX_EN
308 of 333
ns
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
Table 14-8. Receive RMII Interface
(Note 1, Figure 14-4)
PARAMETER
SYMBOL
MIN
REF_CLK Frequency
10Mbps
TYP
50MHz
±50ppm
MAX
100Mbps
TYP
50MHz
±50ppm
MIN
UNITS
MHz
REF_CLK Period
t1
REF_CLK Low Time
t2
7
13
7
13
ns
REF_CLK High Time
t3
7
13
7
13
ns
t8
5
5
ns
t9
5
5
ns
RXD, CRS_DV to
REF_CLK Setup Time
REF_CLK to RXD,
CRS_DV Hold Time
Note 1:
20
MAX
20
ns
Timing parameters in this table are guaranteed by design (GBD).
Figure 14-4. Receive RMII Interface Timing
t5
t7
REF_CLK
t6
t8
t9
RXD[3:0]
t9
t8
CRS_DV
309 of 333
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
14.4 MDIO Interface
Table 14-9. MDIO Interface
(Note 1, Figure 14-5)
PARAMETER
SYMBOL
MIN
TYP
MDC Frequency
MAX
1.67
UNITS
MHz
MDC Period
t1
540
600
660
ns
MDC Low Time
t2
270
300
330
ns
MDC High Time
t3
270
300
330
ns
MDC to MDIO Output Delay
t4
20
10
ns
MDIO Setup Time
t5
10
ns
MDIO Hold Time
t6
20
ns
Note 1:
Timing parameters in this table are guaranteed by design (GBD).
Figure 14-5. MDIO Interface Timing
t1
MDC
t2
t3
t4
MDIO
MDC
t5
t6
MDIO
310 of 333
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
14.5 Transmit WAN Interface
Table 14-10. Transmit WAN Interface
(Note 1, Figure 14-6)
PARAMETER
SYMBOL
MIN
TYP
TCLKE Frequency
MAX
UNITS
52
MHz
TCLKE Period
t1
19.2
ns
TCLKE Low Time
t2
8
ns
TCLKE High Time
t3
8
ns
TCLKE to TSERO Output Delay
t4
TSYNC Setup Time
t5
7
ns
TSYNC Hold Time
t6
7
ns
Note 1:
10
Timing parameters in this table are guaranteed by design (GBD).
Figure 14-6. Transmit WAN Timing
t1
TCLKE
t2
t3
t4
TSERI
t5
TSYNC
t6
311 of 333
ns
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
14.6 Receive WAN Interface
Table 14-11. Receive WAN Interface
(Note 1, Figure 14-7)
PARAMETER
SYMBOL
MIN
TYP
RCLKI Frequency
MAX
UNITS
52
MHz
RCLKI Period
t1
19.2
ns
RCLKI Low Time
t2
8
ns
RCLKI High Time
t3
8
ns
RSERI Setup time
t4
7
ns
RSYNC Setup Time
t4
7
ns
RSERI Hold Time
t5
2
ns
RSYNC Hold Time
t5
2
ns
Note 1:
Timing parameters in this table are guaranteed by design (GBD).
Figure 14-7. Receive WAN Timing
t1
RCLKI
t2
t3
t4
t5
RSERO
t4
t5
RSYNC
t4
t5
312 of 333
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
14.7 SDRAM Interface
Table 14-12. SDRAM Interface
(Note 1, Figure 14-8)
PARAMETER
SYMBOL
MIN
100MHz
TYP
MAX
10
10.3
ns
6
ns
7
ns
UNITS
SDCLKO Period
t1
9.7
SDCLKO Duty Cycle
t2
4
SDCLKO to SDATA Valid
Write to SDRAM
t3
SDCLKO to SDATA Drive On
Write to SDRAM
t4
4
ns
SDCLKO to SDATA Invalid
Write to SDRAM
t5
3
ns
SDCLKO to SDATA Drive Off
Write to SDRAM
t6
SDATA to SDCLKO Setup Time
Read from SDRAM
t7
SDCLKO to SDATA Hold Time
Read from SDRAM
t8
2
ns
SDCLKO to SRAS, SCAS, SWE, SDCS Active
Read or Write to SDRAM
t9
5
ns
SDCLKO TO SRAS, SCAS, SWE, SDCS
Inactive Read or Write to SDRAM
t10
SDCLKO to SDA, SBA Valid
Read or Write to SDRAM
t11
SDCLKO to SDA, SBA Invalid
Read or Write to SDRAM
t12
SDCLKO to SDMASK Valid
Read or Write to SDRAM
t13
SDCLKO TO SDMASK Invalid
Read or Write to SDRAM
t14
Note 1:
Timing parameters in this table are guaranteed by design (GBD).
313 of 333
4
2
ns
2
ns
7
2
ns
ns
5
2
ns
ns
ns
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
Figure 14-8. SDRAM Interface Timing
t1
SDCLKO
(output)
t2
t5
t3
SDATA
(output)
t4
t6
t7
t8
SDATA
(input)
SRAS, SCAS,
SWE, SDCS
(output)
t9
t10
t11
t12
t13
t14
SDA, SBA
(output)
SDMASK
(output)
314 of 333
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
14.8 AC Characteristics—Microprocessor Bus
Table 14-13. AC Characteristics—Microprocessor Bus
(VDD3.3 = 3.3V ±5%, VDD1.8 = 1.8V ±5%, Tj = -40°C to +85°C.) (Figure 14-9, Figure 14-10, Figure 14-11,
and Figure 14-12.)
PARAMETER
SYMBOL
MIN
Set-Up Time for A[12:0] Valid to CS/ CST Active
t1
0
ns
Set-Up Time for CS/CST Active to either RD, or
WR Active
t2
0
ns
Delay Time from Either RD or DS Active to
DATA[7:0] Valid
t3
Hold Time from Either RD or WR Inactive to CS/
CST Inactive
t4
0
t5
5
t6
t7
80
10
ns
ns
Data Hold Time from RW Inactive
t8
2
ns
Address Hold from RW Inactive
t9
0
ns
Write Access to Subsequent Write/Read Access
Delay Time
t10
80
ns
Hold Time from CS, CST, RD, or DS Inactive to
DATA[7:0] Tri-State
Wait Time from RW Active to Latch Data
Data Set-Up Time to DS Active
Note 1:
Timing parameters in this table are guaranteed by design (GBD).
315 of 333
TYP
MAX
75
UNITS
ns
ns
20
ns
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
Figure 14-9. Intel Bus Read Timing (MODEC = 00)
t9
ADDR[12:0]
Address Valid
Data Valid
DATA[7:0]
t5
WR
t1
CS/CST
t2
t3
t4
RD
t10
Figure 14-10. Intel Bus Write Timing (MODEC = 00)
t9
ADDR[12:0]
Address Valid
DATA[7:0]
t7
t8
RD
t1
CS/CST
t2
t6
WR
t4
t10
316 of 333
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
Figure 14-11. Motorola Bus Read Timing (MODEC = 01)
t9
ADDR[12:0]
Address Valid
Data Valid
DATA[7:0]
t5
RW
t1
CS/CST
t2
t3
t4
DS
t10
Figure 14-12. Motorola Bus Write Timing (MODEC = 01)
t9
ADDR[12:0]
Address Valid
DATA[7:0]
t7
t8
RW
t1
CS/CST
t2
t6
DS
t4
t10
317 of 333
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
14.9 JTAG Interface Timing
Table 14-14. JTAG Interface
(VDD = 3.3V ±5%, TA = -40°C to +85°C.) (Figure 14-13)
PARAMETER
SYMBOL
JTCLKn Clock Period
t1
JTCLKn Clock High:Low Time
CONDITIONS
MIN
(Note 1)
t2:t3
(Notes 1, 2)
50
TYP
MAX
UNITS
1000
ns
500
ns
JTCLKn to JTDIn, JTMSn Setup Time
t4
(Note 1)
2
ns
JTCLKn to JTDIn, JTMSn Hold Time
t5
(Note 1)
2
ns
JTCLKn to JTDOn Delay
t6
(Note 1)
2
50
ns
JTCLKn to JTDOn HIZ Delay
t7
(Note 1)
2
50
ns
JTRSTn Width Low Time
t8
(Note 1)
100
Note 1:
Note 2:
Timing parameters in this table are guaranteed by design (GBD).
Clock can be stopped high or low.
Figure 14-13. JTAG Interface Timing
t1
t3
t2
JTCLKn
t4
t5
JTDIn, JTMSn,
JTRSTn
t6
t7
JTD0n
t8
JTRSTn
CAPACITIVE TEST LOADS ARE 40pF FOR BUS SIGNALS, 20pF FOR ALL OTHERS.
318 of 333
ns
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
14.10 AC Characteristics—Receive Side
Table 14-15. AC Characteristics—Receive Side
(VDD = 3.3V ±5%, TA = -40°C to +85°C.) (Note 1) (Figure 14-14 to Figure 14-18)
PARAMETER
RCLKO Period
RCLKO Pulse Width
RCLKO Pulse Width
SYMBOL
tLH
tLL
tLH
tLL
tCP
RCLKI Pulse Width
tCH
tCL
RSYSCLK Pulse Width
RSYNC Setup to RSYSCLK Falling
RSYNC Pulse Width
RPOSI/RNEGI Setup to RCLKI Falling
RPOSI/RNEGI Hold from RCLKI
Falling
RSYSCLK, RCLKI Rise and Fall Times
Delay RCLKO to RPOSO, RNEGO
Valid
Delay RCLK to RSERO, RDATA, RSIG
Valid
Delay RCLK to RCHCLK, RSYNC,
RCHBLK, RFSYNC
Delay RSYSCLK to RSERO, RSIG
Valid
Delay RSYSCLK to RCHCLK, CHBLK,
RMSYNC, RSYNC
Note 1:
Note 2:
Note 3:
Note 4:
Note 5:
Note 6:
Note 7:
Note 8:
MIN
tLP
RCLKI Period
RSYSCLK Period
CONDITIONS
tSP
(Note 2)
(Note 2)
(Note 3)
(Note 3)
200
200
150
150
20
20
(Note 4)
(Note 5)
(Note 6)
(Note 7)
(Note 8)
tSH
20
tSL
tSU
tPW
tSU
20
20
50
20
tHD
20
TYP
MAX
488 (E1)
648 (T1)
0.5 tLP
0.5 tLP
0.5 tLP
0.5 tLP
488 (E1)
648 (T1)
0.5 tCP
0.5 tCP
648
488
244
122
61
0.5 tSP
UNITS
ns
ns
ns
ns
ns
ns
ns
ns
ns
ns
ns
0.5 tSP
ns
ns
ns
ns
tR, tF
22
ns
tDD
50
ns
tD1
50
ns
tD2
50
ns
tD3
22
ns
tD4
22
ns
Timing parameters in this table are guaranteed by design (GBD).
Jitter attenuator enabled in the receive path.
Jitter attenuator disabled or enabled in the transmit path.
RSYSCLK = 1.544MHz.
RSYSCLK = 2.048MHz.
RSYSCLK = 4.096MHz.
RSYSCLK = 8.192MHz.
RSYSCLK = 16.384MHz.
319 of 333
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
Figure 14-14. Receive Side Timing, Elastic Store Disabled (T1 Mode)
RCLK
t D1
F Bit
RSERO/RDATA/RSIG
t D2
RCHCLK
t D2
RCHBLK
t D2
RFSYNC / RMSYNC
t D2
RSYNC 1
NOTE 1: RSYNC IS IN THE OUTPUT MODE.
NOTE 2: NO RELATIONSHIP BETWEEN RCHCLK AND RCHBLK AND OTHER SIGNALS IS IMPLIED.
320 of 333
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
Figure 14-15. Receive Side Timing, Elastic Store Disabled (E1 Mode)
RCLK
t D1
MSB of
Channel 1
RSERO / RDATA / RSIG
t D2
RCHCLK
t D2
RCHBLK
t
D2
RFSYNC / RMSYNC
t D2
RSYNC1
NOTE 1: RSYNC IS IN THE OUTPUT MODE (TR.RCR1.5 = 0).
NOTE 2: RLCLK ONLY PULSES HIGH DURING SA BIT LOCATIONS AS DEFINED IN RCR2; NO RELATIONSHIP
BETWEEN RLCLK AND RSYNC OR RFSYNC IS IMPLIED.
Figure 14-16. Receive Side Timing, Elastic Store Enabled (T1 Mode)
t SL
tF
tR
RSYSCLK
t SP
t D3
F-BIT
RSERO / RSIG
t D4
RCHCLK
t D4
RCHBLK
t
D4
RMSYNC
RSYNC
RSYNC
1
t D4
t HD
2
t SH
t SU
NOTE 1: RSYNC IS IN THE OUTPUT MODE.
NOTE 2: RSYNC IS IN THE INPUT MODE.
321 of 333
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
Figure 14-17. Receive Side Timing, Elastic Store Enabled (E1 Mode)
t SL
tF
tR
RSYSCLK
t SH
t SP
t D3
MSB of
Channel 1
RSERO / RSIG
t D4
RCHCLK
t D4
RCHBLK
t
D4
RMSYNC
t D4
RSYNC1
t HD
t SU
RSYNC2
NOTE 1: RSYNC IS IN THE OUTPUT MODE.
NOTE 2: RSYNC IS IN THE INPUT MODE.
Figure 14-18. Receive Line Interface Timing
t LL
RCLKO
t LH
t LP
t DD
RPOSO, RNEGO
322 of 333
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
14.11 AC Characteristics—Transmit Side
Table 14-16. AC Characteristics—Transmit Side
(VDD = 3.3V ±5%, TA = -40°C to +85°C.) (Note 1) (Figure 14-19 to Figure 14-21)
PARAMETER
TCLKT Period
TCLKT Pulse Width
TDCLKI Period
TDCLKI Pulse Width
TSYSCLK Period
SYMBOL
CONDITIONS
MIN
tCP
TYP (E1)
MAX
UNITS
488 (E1)
648 (T1)
ns
tCH
20
0.5 tCP
ns
tCL
20
0.5 tCP
ns
488 (E1)
648 (T1)
ns
tLP
tLH
20
0.5 tLP
ns
tLL
20
0.5 tLP
ns
(Note 2)
648
ns
(Note 3)
448
ns
(Note 4)
244
ns
(Note 5)
122
ns
(Note 6)
61
0.5 tSP
0.5 tSP
ns
ns
ns
tSP
TSYSCLK Pulse Width
tSP
20
20
TSYNC or TSSYNC Setup to
TCLKT or TSYSCLK Falling
tSU
20
ns
TSYNC or TSSYNC Pulse Width
tPW
50
ns
tSU
20
ns
tHD
20
ns
tHD
20
ns
TSERI, TSIG, TDATA, TPOSI,
TNEGI Setup to TCLKT,
TSYSCLK, TDCLKI Falling
TSERI, TSIG, TDATA Hold from
TCLKT or TSYSCLK Falling
TPOSI, TNEGI Hold from TDCLKI
Falling
TCLKT, TDCLKI, or TSYSCLK
Rise and Fall Times
Delay TDCLKO to TPOSO,
TNEGO Valid
Delay TCLKT to TESO Valid
Delay TCLKT to TCHBLK,
TCHCLK, TSYNC
Delay TSYSCLK to TCHCLK,
TCHBLK
Note 1:
Note 2:
Note 3:
Note 4:
Note 5:
Note 6:
tR, tF
25
ns
tDD
50
ns
tD1
50
ns
tD2
50
ns
tD3
22
ns
Timing parameters in this table are guaranteed by design (GBD).
TSYSCLK = 1.544MHz.
TSYSCLK = 2.048MHz.
TSYSCLK = 4.096MHz.
TSYSCLK = 8.192MHz.
TSYSCLK = 16.384MHz.
.
323 of 333
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
Figure 14-19. Transmit Side Timing, Elastic Store Disabled
t CP
t CL
tF
tR
t CH
TCLKT
t D1
TESO
t SU
TSERI / TSIG /
TDATA
t HD
t D2
TCHCLK
t D2
TCHBLK
t D2
TSYNC1
t SU
t HD
TSYNC2
NOTE 1: TSYNC IS IN THE OUTPUT MODE (TR.TCR2.2 = 1).
NOTE 2: TSYNC IS IN THE INPUT MODE (TR.TCR2.2 = 0).
NOTE 3: TSERI IS SAMPLED ON THE FALLING EDGE OF TCLK WHEN THE TRANSMIT-SIDE ELASTIC STORE IS DISABLED.
NOTE 4: TCHCLK AND TCHBLK ARE SYNCHRONOUS WITH TCLK WHEN THE TRANSMIT-SIDE ELASTIC STORE IS
DISABLED.
NOTE 5: NO RELATIONSHIP BETWEEN TCHCLK AND TCHBLK AND THE OTHER SIGNALS IS IMPLIED.
NOTE 6: THIS TIMING DIAGRAM IS INCLUDED FOR SPECIAL APPLICATIONS ONLY. IN MOST APPLICATIONS OF THE
DS33R41, THE USER SHOULD REFER TO Figure 14-20.
324 of 333
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
Figure 14-20. Transmit Side Timing, Elastic Store Enabled
t SP
t SL
tF
tR
t SH
TSYSCLK
t SU
TSERI
t D3
t HD
TCHCLK
t D3
TCHBLK
t HD
t SU
TSSYNC
NOTE 1: TSERI IS ONLY SAMPLED ON THE FALLING EDGE OF TSYSCLK WHEN THE
TRANSMIT-SIDE ELASTIC STORE IS ENABLED.
NOTE 2: TCHCLK AND TCHBLK ARE SYNCHRONOUS WITH TSYSCLK WHEN THE
TRANSMIT-SIDE ELASTIC STORE IS ENABLED.
Figure 14-21. Transmit Line Interface Timing
TCLKO
TPOSO, TNEGO
t DD
325 of 333
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
15 JTAG INFORMATION
The device supports the standard instruction codes SAMPLE:PRELOAD, BYPASS, and EXTEST. Optional public
instructions included are HIGHZ, CLAMP, and IDCODE. See Table 15-1. The device contains the following as
required by IEEE 1149.1 Standard Test Access Port and Boundary Scan Architecture.
Test Access Port (TAP)
TAP Controller
Instruction Register
Bypass Register
Boundary Scan Register
Device Identification Register
The Test Access Port has the necessary interface pins; JTRSTn, JTCLKn, JTMSn, JTDIn, and JTDOn. See the pin
descriptions for details. Refer to IEEE 1149.1-1990, IEEE 1149.1a-1993, and IEEE 1149.1b-1994 for details about
the Boundary Scan Architecture and the Test Access Port.
Figure 15-1. JTAG Functional Block Diagram
Boundary Scan
Register
Identification
Register
Mux
Bypass
Register
Instruction
Register
Select
Test Access Port
Controller
10K
10K
JTDI
JTMS
Tri-State
10K
JTCLK
JTRST*
326 of 333
JTDO
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
15.1 JTAG TAP Controller State Machine Description
This section covers the details on the operation of the Test Access Port (TAP) Controller State Machine. The TAP
controller is a finite state machine that responds to the logic level at JTMSn on the rising edge of JTCLKn.
TAP Controller State Machine
The TAP controller is a finite state machine that responds to the logic level at JTMSn on the rising edge of
JTCLKn. See Figure 15-2 for a diagram of the state machine operation.
Test-Logic-Reset
Upon power up, the TAP Controller is in the Test-Logic-Reset state. The Instruction register will contain the
IDCODE instruction. All system logic of the device will operate normally.
Run-Test-Idle
The Run-Test-Idle is used between scan operations or during specific tests. The Instruction register and test
registers will remain idle.
Select-DR-Scan
All test registers retain their previous state. With JTMSn LOW, a rising edge of JTCLKn moves the controller into
the Capture-DR state and will initiate a scan sequence. JTMSn HIGH during a rising edge on JTCLKn moves the
controller to the Select-IR-Scan state.
Capture-DR
Data may be parallel-loaded into the test data registers selected by the current instruction. If the instruction does
not call for a parallel load or the selected register does not allow parallel loads, the test register will remain at its
current value. On the rising edge of JTCLKn, the controller will go to the Shift-DR state if JTMSn is LOW or it will
go to the Exit1-DR state if JTMSn is HIGH.
Shift-DR
The test data register selected by the current instruction is connected between JTDIn and JTDOn and will shift
data one stage towards its serial output on each rising edge of JTCLKn. If a test register selected by the current
instruction is not placed in the serial path, it will maintain its previous state.
Exit1-DR
While in this state, a rising edge on JTCLKn will put the controller in the Update-DR state, which terminates the
scanning process, if JTMSn is HIGH. A rising edge on JTCLKn with JTMSn LOW will put the controller in the
Pause-DR state.
Pause-DR
Shifting of the test registers is halted while in this state. All test registers selected by the current instruction will
retain their previous state. The controller will remain in this state while JTMSn is LOW. A rising edge on JTCLKn
with JTMSn HIGH will put the controller in the Exit2-DR state.
Exit2-DR
A rising edge on JTCLKn with JTMSn HIGH while in this state will put the controller in the Update-DR state and
terminate the scanning process. A rising edge on JTCLKn with JTMSn LOW will enter the Shift-DR state.
327 of 333
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
Update-DR
A falling edge on JTCLKn while in the Update-DR state will latch the data from the shift register path of the test
registers into the data output latches. This prevents changes at the parallel output due to changes in the shift
register.
Select-IR-Scan
All test registers retain their previous state. The instruction register will remain unchanged during this state. With
JTMSn LOW, a rising edge on JTCLKn moves the controller into the Capture-IR state and will initiate a scan
sequence for the instruction register. JTMSn HIGH during a rising edge on JTCLKn puts the controller back into
the Test-Logic-Reset state.
Capture-IR
The Capture-IR state is used to load the shift register in the instruction register with a fixed value. This value is
loaded on the rising edge of JTCLKn. If JTMSn is HIGH on the rising edge of JTCLKn, the controller will enter the
Exit1-IR state. If JTMSn is LOW on the rising edge of JTCLKn, the controller will enter the Shift-IR state.
Shift-IR
In this state, the shift register in the instruction register is connected between JTDIn and JTDOn and shifts data
one stage for every rising edge of JTCLKn towards the serial output. The parallel register, as well as all test
registers, remains at their previous states. A rising edge on JTCLKn with JTMSn HIGH will move the controller to
the Exit1-IR state. A rising edge on JTCLKn with JTMSn LOW will keep the controller in the Shift-IR state while
moving data one stage thorough the instruction shift register.
Exit1-IR
A rising edge on JTCLKn with JTMSn LOW will put the controller in the Pause-IR state. If JTMSn is HIGH on the
rising edge of JTCLKn, the controller will enter the Update-IR state and terminate the scanning process.
Pause-IR
Shifting of the instruction shift register is halted temporarily. With JTMSn HIGH, a rising edge on JTCLKn will put
the controller in the Exit2-IR state. The controller will remain in the Pause-IR state if JTMSn is LOW during a rising
edge on JTCLKn.
Exit2-IR
A rising edge on JTCLKn with JTMSn LOW will put the controller in the Update-IR state. The controller will loop
back to Shift-IR if JTMSn is HIGH during a rising edge of JTCLKn in this state.
Update-IR
The instruction code shifted into the instruction shift register is latched into the parallel output on the falling edge of
JTCLKn as the controller enters this state. Once latched, this instruction becomes the current instruction. A rising
edge on JTCLKn with JTMSn held low will put the controller in the Run-Test-Idle state. With JTMSn HIGH, the
controller will enter the Select-DR-Scan state.
328 of 333
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
Figure 15-2. TAP Controller State Diagram
1
Test Logic
Reset
0
0
Run Test/
Idle
1
Select
DR-Scan
1
Select
IR-Scan
0
1
0
1
Capture DR
Capture IR
0
Shift DR
0
Shift IR
0
1
Exit IR
Pause IR
0
1
0
1
0
0
Pause DR
0
1
1
Exit DR
1
Exit2 DR
1
0
Exit2 IR
1
1
Update DR
Update IR
1
1
0
329 of 333
0
0
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
15.2 Instruction Register
The instruction register contains a shift register as well as a latched parallel output and is 3 bits in length. When
the TAP controller enters the Shift-IR state, the instruction shift register is connected between JTDIn and JTDOn.
While in the Shift-IR state, a rising edge on JTCLKn with JTMSn LOW will shift the data one stage towards the
serial output at JTDOn. A rising edge on JTCLKn in the Exit1-IR state or the Exit2-IR state with JTMSn HIGH will
move the controller to the Update-IR state. The falling edge of that same JTCLKn will latch the data in the
instruction shift register to the instruction parallel output. Instructions supported by the device and its respective
operational binary codes are shown in Table 15-1.
Table 15-1. Instruction Codes for IEEE 1149.1 Architecture
INSTRUCTION
SAMPLE:PRELOAD
BYPASS
EXTEST
CLAMP
HIGHZ
IDCODE
SELECTED REGISTER
Boundary Scan
Bypass
Boundary Scan
Bypass
Bypass
Device Identification
INSTRUCTION CODES
010
111
000
011
100
001
15.2.1 SAMPLE:PRELOAD
This is a mandatory instruction for the IEEE 1149.1 specification. This instruction supports two functions. The
digital I/Os of the device can be sampled at the boundary scan register without interfering with the normal
operation of the device by using the Capture-DR state. SAMPLE:PRELOAD also allows the device to shift data
into the boundary scan register via JTDIn using the Shift-DR state.
15.2.2 BYPASS
When the BYPASS instruction is latched into the parallel instruction register, JTDIn connects to JTDOn through the
one-bit bypass test register. This allows data to pass from JTDIn to JTDOn not affecting the device’s normal
operation.
15.2.3 EXTEST
This allows testing of all interconnections to the device. When the EXTEST instruction is latched in the instruction
register, the following actions occur. Once enabled via the Update-IR state, the parallel outputs of all digital output
pins are driven. The boundary scan register is connected between JTDIn and JTDOn. The Capture-DR will
sample all digital inputs into the boundary scan register.
15.2.4 CLAMP
All digital outputs of the device will output data from the boundary scan parallel output while connecting the bypass
register between JTDIn and JTDOn. The outputs will not change during the CLAMP instruction.
15.2.5 HIGHZ
All digital outputs of the device are placed in a high-impedance state. The BYPASS register is connected between
JTDIn and JTDOn.
15.2.6 IDCODE
When the IDCODE instruction is latched into the parallel instruction register, the identification test register is
selected. The device identification code is loaded into the identification register on the rising edge of JTCLKn
following entry into the Capture-DR state. Shift-DR can be used to shift the identification code out serially via
JTDOn. During Test-Logic-Reset, the identification code is forced into the instruction register’s parallel output.
The ID code will always have a ‘1’ in the LSB position. The next 11 bits identify the manufacturer’s JEDEC number
and number of continuation bytes followed by 16 bits for the device and 4 bits for the version.
330 of 333
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
15.3 JTAG ID Codes
Table 15-2. ID Code Structure
REVISION
ID[31:28]
DEVICE CODE
ID[27:12]
MANUFACTURER’S CODE
ID[11:1]
REQUIRED
ID[0]
Ethernet
Mapper
0000
0000 0000 0110 0010
000 1010 0001
1
T1/E1/J1
Transceiver
0000
0000 0000 0010 0010
000 1010 0001
1
DEVICE
15.4 Test Registers
IEEE 1149.1 requires a minimum of two test registers; the bypass register and the boundary scan register. An
optional test register has been included with the DS26521 design. This test register is the identification register
and is used in conjunction with the IDCODE instruction and the Test-Logic-Reset state of the TAP controller.
15.5 Boundary Scan Register
This register contains both a shift register path and a latched parallel output for all control cells and digital I/O cells
and is n bits in length.
15.6 Bypass Register
This is a single one-bit shift register used in conjunction with the BYPASS, CLAMP, and HIGHZ instructions, which
provides a short path between JTDIn and JTDOn.
15.7 Identification Register
The identification register contains a 32-bit shift register and a 32-bit latched parallel output. This register is
selected during the IDCODE instruction and when the TAP controller is in the Test-Logic-Reset state.
331 of 333
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
15.8 JTAG Functional Timing
This functional timing for the JTAG circuits shows:
•
The JTAG controller starting from reset state
•
Shifting out the first 4 LSB bits of the IDCODE
•
Shifting in the BYPASS instruction (111) while shifting out the mandatory X01 pattern
•
Shifting the TDI pin to the TDO pin through the bypass shift register
•
An asynchronous reset occurs while shifting
Figure 15-3. JTAG Functional Timing
(INST)
(STATE)
IDCODE
Run Test
Idle
Reset
Select DR
Scan
Capture
DR
Exit1
DR
Shift
DR
IDCODE
BYPASS
Update
DR
Select DR
Scan
Select IR
Scan
Capture
IR
Shift IR
Exit1
IR
Update
IR
Select DR
Scan
Capture
DR
Shift
DR
Test
Logic Idle
JTCLK
JTRST
JTMS
JTDI
X
X
X
X
JTDO
Output
Pin
X
Output pin level change if in "EXTEST" instruction mode
332 of 333
X
DS33R41 Inverse-Multiplexing Ethernet Mapper with Quad Integrated T1/E1/J1 Transceivers
16 PACKAGE INFORMATION
(The package drawing(s) in this data sheet may not reflect the most current specifications. For the latest package outline information, go to
www.maxim-ic.com/DallasPackInfo.)
16.1 Package Outline Drawing of 27mm 400-Ball BGA (View from Bottom of Device)
333 of 333
Maxim/Dallas Semiconductor cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim/Dallas Semiconductor product.
No circuit patent licenses are implied. Maxim/Dallas Semiconductor reserves the right to change the circuitry and specifications without notice at any time.
Maxim Integrated Products, 120 San Gabriel Drive, Sunnyvale, CA 94086 408-737-7600
© 2005 Maxim Integrated Products • Printed USA
The Maxim logo is a registered trademark of Maxim Integrated Products, Inc. The Dallas logo is a registered trademark of Dallas Semiconductor.