NSC DS75451M

DS75451/2/3
Series Dual Peripheral Drivers
General Description
Features
The DS7545X series of dual peripheral drivers is a family of
versatile devices designed for use in systems that use TTL
logic. Typical applications include high speed logic buffers,
power drivers, relay drivers, lamp drivers, MOS drivers, bus
drivers and memory drivers.
The DS75451, DS75452 and DS75453 are dual peripheral
AND, NAND and NOR drivers, respectively, (positive logic)
with the output of the logic gates internally connected to the
bases of the NPN output transistors.
n
n
n
n
n
n
n
n
Connection Diagrams
300 mA output current capability
High voltage outputs
No output latch-up at 20V
High speed switching
Choice of logic function
TTL compatible diode-clamped inputs
Standard supply voltages
Replaces TI “A” and “B” series
(Dual-In-Line and Metal Can Packages)
DS005824-2
DS005824-3
*See (Note 5) and Appendix E regarding S.O. package power dissipation
constraints.
Top View
Order Number DS75451M or DS75451N
Top View
Order Number DS75452M or DS75452N
See NS Package Numbers M08A* or N08E
DS005824-4
*See (Note 5) and Appendix E regarding S.O. package power dissipation constraints.
Top View
Order Number DS75453M or DS75453N
See NS Package Numbers M08A* or N08E
© 2000 National Semiconductor Corporation
DS005824
www.national.com
DS75451/2/3 Series Dual Peripheral Drivers
February 2000
DS75451/2/3
Absolute Maximum Ratings (Note 1)
Molded DIP Package
SO Package
Storage Temperature Range
Lead Temperature (Soldering, 4 sec.)
If Military/Aerospace specified devices are required,
please contact the National Semiconductor Sales Office/
Distributors for availability and specifications.
Supply Voltage, (VCC) (Note 2)
Input Voltage
Inter-Emitter Voltage (Note 3)
Output Voltage (Note 4)
Output Current (Note 5)
Maximum Power (Note 5)
Dissipation† at 25˚C
7.0V
5.5V
5.5V
30V
300 mA
957 mW
632 mW
−65˚C to +150˚C
260˚C
Operating Conditions
Supply Voltage, (VCC)
Temperature, (TA)
Min
4.75
0
Max
5.25
+70
Units
V
˚C
†Derate molded package 7.7 mW/˚C above 25˚C, derate SO package 7.56
mW/˚C above 25˚C.
Electrical Characteristics
(Notes 6, 7)
Symbol
Parameter
VIH
High-Level Input Voltage
VIL
Low-Level Input Voltage
VI
Input Clamp Voltage
VOL
Low-Level Output Voltage
IOH
High-Level Output Current
II
Input Current at Maximum
Input Voltage
IIH
High-Level Input Current
IIL
Low-Level Input Current
ICCH
Supply Current, Outputs
High
ICCL
Supply Current, Outputs
Low
Conditions
Min
(Figure 7)
VCC = Min, II = −12 mA
VCC =
VIL = 0.8V
Min,
(Figure 7) V = 2V
IH
=
= 30V
0.8
V
−1.5
V
0.4
V
DS75451, DS75453
0.5
0.7
V
DS75452
0.25
0.4
V
IOL = 300 mA
VIH = 2V
DS75452
0.5
0.7
V
DS75451, DS75453
100
µA
DS75452
100
µA
1
mA
40
µA
VCC = Max, VI = 2.4V, (Figure 9 )
VCC = Max, VI = 0.4V, (Figure 8)
VCC =
VI = 5V
Max,
VI = 0V
(Figure
VI = 5V
10)
VCC
Max,
(Figure
10)
V
IOL = 100 mA
IOL = 300 mA
IOL = 100 mA
VCC
VOH
Min,
VIL = 0.8V
(Figure 7)
VCC = Max, VI = 5.5V, (Figure 9)
=
Typ Max Units
2
0.25
DS75451, DS75453
−1
−1.6
mA
DS75451
7
11
mA
DS75452
11
14
mA
DS75453
8
11
mA
VI = 0V
DS75451
52
65
mA
VI = 5V
DS75452
56
71
mA
VI = 0V
DS75453
54
68
mA
Typ Max
Units
Switching Characteristics
(VCC = 5V, TA = 25˚C)
Symbol
tPLH
tPHL
Propagation Delay Time, Low-to-High
Level Output
Parameter
Conditions
CL = 15 pF, RL = 50Ω,
IO ≈ 200 mA, (Figure 14)
Propagation Delay Time, High-to-Low
Level Output
CL = 15 pF, RL = 50Ω,
IO ≈ 200 mA, (Figure 14)
tTLH
Transition Time, Low-to-High Level
Output
tTHL
Transition Time, High-to-Low Level
Output
www.national.com
Min
DS75451
18
25
ns
DS75452
26
35
ns
DS75453
18
25
ns
DS75451
18
25
ns
DS75452
24
35
ns
DS75453
16
25
ns
5
8
ns
7
12
ns
CL = 15 pF, RL = 50Ω, IO ≈ 200 mA,
(Figure 14)
CL = 15 pF, RL = 50Ω, IO ≈ 200 mA,
(Figure 14 )
2
Symbol
VOH
Parameter
High-Level Output Voltage after
Switching
(Continued)
Conditions
VS = 20V, IO ≈ 300 mA, (Figure 15)
Min
VS − 6.5
Typ Max
Units
mV
Note 1: “Absolute Maximum Ratings” are those values beyond which the safety of the device cannot be guaranteed. Except for “Operating Temperature Range” they
are not meant to imply that the devices should be operated at these limits. The table of “Electrical Characteristics” provides conditions for actual device operation.
Note 2: Voltage values are with respect to network ground terminal unless otherwise specified.
Note 3: The voltage between two emitters of a multiple-emitter transistor.
Note 4: The maximum voltage which should be applied to any output when it is in the “OFF” state.
Note 5: Both halves of these dual circuits may conduct rated current simultaneously; however, power dissipation averaged over a short time interval must fall within
the continuous dissipation rating.
Note 6: Unless otherwise specified min/max limits apply across 0˚C to +70˚C range. All typicals are given for VCC = +5V and TA = 25˚C.
Note 7: All currents into device pins shown as positive, out of device pins as negative, all voltages referenced to ground unless otherwise noted. All values shown
as max or min on absolute value basis.
Truth Tables
(H = high level, L = low level)
DS75451
A
B
Y
L
L
L (ON State)
L
H
L (ON State)
H
L
L (ON State)
H
H
H (OFF State)
A
B
L
L
H (OFF State)
L
H
H (OFF State)
H
L
H (OFF State)
H
H
L (ON State)
A
B
L
L
L (ON State)
DS75452
Y
DS75453
Y
L
H
H (OFF State)
H
L
H (OFF State)
H
H
H (OFF State)
3
www.national.com
DS75451/2/3
Switching Characteristics
DS75451/2/3
Schematic Diagrams
DS75451
DS005824-11
Resistor values shown are nominal.
DS75452
DS005824-12
Resistor values shown are nominal.
DS75453
DS005824-13
Resistor values shown are nominal.
www.national.com
4
DS75451/2/3
DC Test Circuits
DS005824-15
Both inputs is tested simultaneously.
FIGURE 1. VIH, VOL
DS005824-18
Each input is tested separately.
FIGURE 4. II, IIH
DS005824-16
Each input is tested separately.
FIGURE 2. VIL, VOH
DS005824-19
Each input is tested separately.
FIGURE 5. IOS
DS005824-17
Each input is tested separately.
FIGURE 3. VI, IIL
DS005824-20
Both gates are tested simultaneously.
FIGURE 6. ICCH, ICCL
5
www.national.com
DS75451/2/3
DC Test Circuits
(Continued)
DS005824-21
Input
Under
Test
Circuit
DS75451
DS75452
DS75453
Output
Other
Input
Apply
VIH
VIH
VOH
IOL
VIL
VCC
IOL
VOL
Measure
VIH
VIH
IOL
VOL
VIL
VCC
VOH
IOH
VIH
Gnd
VOH
IOH
VIL
VIL
IOL
VOH
FIGURE 7. VIH, VIL, IOH, VOL
DS005824-24
Both gates are tested simultaneously.
DS005824-22
Note A: Each input is tested separately.
Note B: When testing DS75453 input not under test is grounded.
For all other circuits it is at 4.5V.
FIGURE 10. ICCH, ICCL for AND, NAND Circuits
FIGURE 8. VI, VIL
DS005824-25
DS005824-23
Both gates are tested simultaneously.
Each input is tested separately.
FIGURE 11. ICCH, ICCL for OR, NOR Circuits
FIGURE 9. II, IIH
www.national.com
6
DS75451/2/3
AC Test Circuits and Switching Time Waveforms
DS005824-26
DS005824-27
Note 1: The pulse generator has the following characteristics: PRR = 1 MHz, ZOUT ≈ 50Ω.
Note 2: CL includes probe and jig capacitance.
FIGURE 12. Propagation Delay Times, Each Gate
DS005824-28
DS005824-29
Note 1: The pulse generator has the following characteristics: duty cycle ≤ 1%, ZOUT ≈ 50Ω.
Note 2: CL includes probe and jig capacitance.
FIGURE 13. Switching Times, Each Transistor
7
www.national.com
DS75451/2/3
AC Test Circuits and Switching Time Waveforms
(Continued)
DS005824-30
DS005824-31
Note 1: The The pulse generator has the following characteristics: PRR = 1.0 MHz, ZOUT ≈ 50Ω.
Note 2: CL includes probe and jig capacitance.
FIGURE 14. Switching Times of Complete Drivers
www.national.com
8
DS75451/2/3
AC Test Circuits and Switching Time Waveforms
(Continued)
DS005824-32
DS005824-33
Note 1: The pulse generator has the following characteristics: PRR = 12.5 kHz, ZOUT ≈ 50Ω.
Note 2: CL includes probe and jig capacitance.
FIGURE 15. Latch-UP Test of Complete Drivers
Typical Performance Characteristics
DS005824-37
FIGURE 16. Transistor Collector-Emitter Saturation Voltage vs Collector Current
9
www.national.com
DS75451/2/3
Typical Applications
DS005824-46
*Optional keep-alive resistors maintain off-state lamp current at ≈ 10% to reduce surge current.
FIGURE 17. Dual Lamp or Relay Driver
DS005824-47
FIGURE 18. Complementary Driver
DS005824-48
FIGURE 19. TTL or DTL Positive Logic-Level Detector
www.national.com
10
DS75451/2/3
Typical Applications
(Continued)
DS005824-49
*The two input resistors must be adjusted for the level of MOS input.
FIGURE 20. MOS Negative Logic-Level Detector
11
www.national.com
DS75451/2/3
Typical Applications
(Continued)
DS005824-50
FIGURE 21. Logic Signal Comparator
DS005824-51
*If inputs are unused, they should be connected to +5V through a 1k resistor.
DS005824-52
Low output occurs only when inputs are low simultaneously.
FIGURE 22. In-Phase Detector
www.national.com
12
DS75451/2/3
Physical Dimensions
inches (millimeters) unless otherwise noted
SO Package (M)
Order Number DS75451M, DS75452M, DS75453M
NS Package Number M08A
Molded Dual-In-Line Package (N)
Order Number DS75451N, DS75452N, DS75453N
NS Package Number N08E
13
www.national.com
DS75451/2/3 Series Dual Peripheral Drivers
Notes
LIFE SUPPORT POLICY
NATIONAL’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT
DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT AND GENERAL
COUNSEL OF NATIONAL SEMICONDUCTOR CORPORATION. As used herein:
1. Life support devices or systems are devices or
systems which, (a) are intended for surgical implant
into the body, or (b) support or sustain life, and
whose failure to perform when properly used in
accordance with instructions for use provided in the
labeling, can be reasonably expected to result in a
significant injury to the user.
National Semiconductor
Corporation
Americas
Tel: 1-800-272-9959
Fax: 1-800-737-7018
Email: [email protected]
www.national.com
National Semiconductor
Europe
Fax: +49 (0) 180-530 85 86
Email: [email protected]
Deutsch Tel: +49 (0) 69 9508 6208
English Tel: +44 (0) 870 24 0 2171
Français Tel: +33 (0) 1 41 91 8790
2. A critical component is any component of a life
support device or system whose failure to perform
can be reasonably expected to cause the failure of
the life support device or system, or to affect its
safety or effectiveness.
National Semiconductor
Asia Pacific Customer
Response Group
Tel: 65-2544466
Fax: 65-2504466
Email: [email protected]
National Semiconductor
Japan Ltd.
Tel: 81-3-5639-7560
Fax: 81-3-5639-7507
National does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and National reserves the right at any time without notice to change said circuitry and specifications.