Noise Suppression Products/EMI Suppression Filters > Leaded EMIFILr (Three-terminal Capacitor type) > Standard Type Data Sheet 1 Leaded EMIFILr (Three-terminal Capacitor type) Standard Type DSN9N/DST9N Series DSN9N Series c Dimensions c Insertion Loss Characteristics (Main Items) (50Ω - 50Ω) 0 4.0 max. 9.5 max. 270pF 2200pF 2.5±0.5 Insertion Loss (dB) 1.5 max. 10.0 max. 20 I 1.0±0.5 5.0±0.5 ø0.65 GND I Q55 Type: 25.0 min. Q56 Type: 6.0±1.0 Q54 Type: 4.0±0.5 40 22000pF 60 80 100 0.01 0.1 1 (in mm) 10 Frequency (MHz) 100 1000 c Rated Value (p: lead type/packaging code) Part Number Capacitance Rated Voltage Operating Temperature Range Rated Current DSN9NC52A271p 270pF ±20% 100Vdc 7A -25 to +85°C DSN9NC52A222p 2200pF ±20% 100Vdc 7A -25 to +85°C DSN9NC51H223p 22000pF 50/-20% 50Vdc 7A -25 to +85°C Rated current is 6A for taping type and its lead diameter is phi 0.6mm and three terminal in line arrangement. DST9N Series c Dimensions c Insertion Loss Characteristics (Main Items) (50Ω - 50Ω) 0 4.0 max. 9.5 max. 2200pF 270pF Insertion Loss (dB) 1.5 max. 15.5 max. 20 Ferrite bead 40 60 I 2.5±0.5 22000pF I1 5.0±0.5 1.25±0.5 80 ø0.65 GND Q55 Type: I=25.0 min. Q50 Type: I1=4.0±0.5 100 0.01 0.1 1 10 100 1000 Frequency (MHz) (in mm) Continued on the following page. oThis data sheet is applied for Lead EMIFILr Capacitor Type used for General Electronics equipment for your design. !Note: 1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering. 2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 2012.9.6 http://www.murata.com/ Noise Suppression Products/EMI Suppression Filters > Leaded EMIFILr (Three-terminal Capacitor type) > Standard Type Data Sheet 2 Continued from the preceding page. c Rated Value (p: lead type/packaging code) Capacitance Rated Voltage Rated Current Operating Temperature Range DST9NC52A271p 270pF ±20% 100Vdc 7A -25 to +85°C DST9NC52A222p 2200pF ±20% 100Vdc 7A -25 to +85°C DST9NC51H223p 22000pF 50/-20% 50Vdc 7A -25 to +85°C Part Number Rated current is 6A for taping type and its lead diameter is phi 0.6mm and three terminal in line arrangement. c Equivalent Circuit c Equivalent Circuit DSN9N Series DST9N Series GND GND No polarity. No polarity. c Packaging Minimum Quantity Minimum Order Quantity (order in sets only) (Pcs.) Part Number Ammo Pack ø320mm Paper reel DSN9 Series 2000 — DST9 Series 1000 — Bulk (Bag) 250 Q55 500 Q54/Q56 200 Q55 250 Q50/Q52 Lead Type/Packaging Code Lead Type Q55B Q50B Q52B Straight Lead Length* (in mm) All series 4.0±0.5 DST9N/H 6.0±1.0 Q54B 4.0±0.5 Q56B 6.0±1.0 T41B T51B Incrimp Q92A Straight U31A 4.0±0.5 Incrimp DSN6/9, DSS6 DSS6N 25.0 min. DSp6, DSN9N/H 16.5±1.0 18.5±1.0 Q93A U21A DST9N Bulk 20.0±1.0 Q91A Series Packaging 25.0 min. Ammo Pack 16.5±1.0 All series DSS6N 18.5±1.0 *Lead Distance between Reference and Bottom Planes except Bulk. Continued on the following page. oThis data sheet is applied for Lead EMIFILr Capacitor Type used for General Electronics equipment for your design. !Note: 1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering. 2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 2012.9.6 http://www.murata.com/ Noise Suppression Products/EMI Suppression Filters > Leaded EMIFILr (Three-terminal Capacitor type) > Standard Type Data Sheet 3 Continued from the preceding page. c Caution · Notice !Caution o Rating Do not use products beyond the rated current and rated voltage as this may create excessive heat and deteriorate the insulation resistance. o Soldering and Mounting 1. Mounting holes should be designed as specified in these specifications. Other designs than those shown in these specifications may cause cracks in ceramics that may lead to smoking or firing. 2. DSN9/DST9/DSN9H/DST9H/VFS9V Series Mounting for PCB. (Applis only to bulk type.) The form of the mounting hole of the bulk item is a triangle. The product should be inserted and soldered to each hole in the correct way as in Fig.2. (The center terminal and the other terminals become parallel when viewing the product from the side.) Smoking and firing maybe caused by incorrect mounting as in Fig.3. (The center terminal and the other terminals cross when viewing the product from the side.) Marking Side Center Terminal (Ground Terminal) Fig.2 Right Way Fig.3 Wrong Way Continued on the following page. oThis data sheet is applied for Lead EMIFILr Capacitor Type used for General Electronics equipment for your design. !Note: 1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering. 2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 2012.9.6 http://www.murata.com/ Noise Suppression Products/EMI Suppression Filters > Leaded EMIFILr (Three-terminal Capacitor type) > Standard Type Data Sheet 4 Continued from the preceding page. Notice o Storage and Operating Conditions <Operating Environment> 1. Do not use products in a chemical atmosphere such as chlorine gas, acid or sulfide gas. 2. Do not use products near water, oil or organic solvents. Avoid environments where dust or dirt may adhere to the product. <Storage and Handling Requirements> 1. Storage Period Use the products within 12 months after delivery. Solderability should be checked if this period is exceeded. 2. Storage Conditions (1) Storage temperature: -10 to 40 degrees C Relative humidity: 15 to 85% Avoid sudden changes in temperature and humidity. (2) Do not store products in a chemical atmosphere such as chlorine gas, acid or sulfide gas. (3) When restoring taping type (BL01RN1A1F1J), please attach the spacer between the flanges of the reel. The spacer is corrugated paper that is attached when shipping. <Using EMIGUARDr effectively> 1. Terminal (with mark) should be properly connected to the line of incoming electrostatic surge. (There is polarity.) Otherwise, no effect in ESD suppression can be expected (VFR3V). Example of input terminal Incoming Electrostatic Surges Example of output terminal Incoming Electrostatic Surges 2. Products should be used at rated voltage or less and rated current or less. 3. Products should not be applied for the absorption of surges that have large energy (e.g., induced lightning surges, switching surges) because it is designed for the absorption of electrostatic surges (VFR3V). 4. Electrostatic testing should be done on the following conditions (VFR3V). N s ; # 2 s 62 ]2 < 8.0 x105 n: Times applied C: Charging Capacitance (pF) V: Testing Voltage (kV) R: Charging Resistance (Ω) o Soldering and Mounting 1. Washing Failure and degradation of a product are caused by the washing method. When you wash in conditions that are not in the mounting information, please contact Murata engineering. 2. Soldering Reliability decreases with improper soldering methods. Please solder by the standard soldering conditions shown in the mounting information. 3. Other Noise suppression levels resulting from Murata's EMI suppression filters EMIFILr may vary, depending on the circuits and ICs used, type of noise, mounting pattern, lead wire length, mounting location, and other operating conditions. Be sure to check and confirm in advance the noise suppression effect of each filter, in actual circuits, etc. before applying the filter in a commercial-purpose equipment design. oThis data sheet is applied for Lead EMIFILr Capacitor Type used for General Electronics equipment for your design. !Note: 1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering. 2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 2012.9.6 http://www.murata.com/