Rohm DTB113ZS Digital transistors (built-in resistors) Datasheet

DTB113ZK / DTB113ZS
Transistors
Digital transistors (built-in resistors)
DTB113ZK / DTB113ZS
zExternal dimensions (Unit : mm)
2.9 +
− 0.2
1.9 +
− 0.2
DTB113ZK
1.1+0.2
−0.1
0.8 +
− 0.1
0.95 0.95
1.6+0.2
−0.1
2.8 +
− 0.2
(2)
(1)
0∼0.1
+0.1
0.15 −0.06
0.4 +0.1
−0.05
ROHM : SMT3
EIAJ : SC-59
0.3∼0.6
(3)
(1) GND
(2) IN
(3) OUT
All terminals have same dimensions
Addreviated symbol : G11
2+
− 0.2
4+
− 0.2
3Min.
3+
− 0.2
DTB113ZS
(15Min.)
zFeature
1) Built-in bias resistors enable the
configuration of an inverter circuit
without connecting external input
resistors (see equivalent circuit).
2) The bias resistors consist of thinfilm resistors with complete isolation to allow positive biasing of the
input. They also have the advantage of almost completely eliminating parasitic effects.
3) Only the on / off conditions need to
be set for operation, making device
design easy.
zStructure
PNP digital transistor
(Built-in resistor type)
5
ROHM : SPT
EIAJ : SC-72
0.15
0.45+
−0.05
0.4
2.5 +
−0.1
0.5
0.15
0.45 +
−0.05
(1) GND
(2) OUT
(3) IN
(1) (2) (3)
zAbsolute maximum ratings (Ta=25°C)
Parameter
Symbol
zEquivalent circuit
Limits(DTB113Z )
K
S
Unit
VCC
−50
V
Input voltage
VIN
−10 to +5
V
Output current
IC
−500
mA
Power dissipation
Pd
Junction temperature
Tj
150
C
Storage temperature
Tstg
−55 to +150
C
200
300
OUT
R1
Supply voltage
mW
IN
R2
GND(+)
OUT
IN
GND(+)
1/2
DTB113ZK / DTB113ZS
Transistors
zElectrical characteristics (Ta=25°C)
Parameter
Symbol
Min.
Typ.
Max.
VI(off)
−
−
−0.3
VI(on)
−3
−
−
VO(on)
−
−
−0.3
V
II
−
−
−7.2
mA
VI= −5V
VCC= −50V, VI=0V
Input voltage
Output voltage
Input current
Unit
V
IO(off)
−
−
−0.5
µA
DC current gain
GI
56
−
−
−
Input resistance
R1
0.7
1
1.3
kΩ
Resistance ratio
R2/R1
8
10
12
−
fT
−
200
−
MHz
Output current
Transition frequency
Conditions
VCC= −5V, IO= −100µA
VO= −0.3V, IO= −20mA
IO/II= −50mA/−2.5mA
VO= − 5V, IO= −50mA
−
−
VCE= −10V, IE=50mA, f=100MHz ∗
∗ Transition frequency of the device
zPackaging specifications
Part No.
Package
SMT3
SPT
Packaging type
Taping
Taping
Code
T146
TP
Basic ordering
unit (pieces)
3000
5000
−
DTB113ZK
−
DTB113ZS
zElectrical characteristics curves
-10m
-5m
VO= −0.3V
-20
(on)
INPUT VOLTAGE : VI
OUTPUT CURRENT : Io (A)
(V )
-50
-10
-5
Ta= −40 C
25 C
100 C
-2
-1
-500m
-200m
-100m
-500µ -1m -2m
-5m -10m -20m -50m-100m-200m -500m
-1m
-500µ
Input voltage vs. output current
(ON characteristics)
-1
Ta=100 C
25 C
−40 C
-200µ
-100µ
-50µ
-20µ
-10µ
-5µ
-2µ
-1µ
0
200
100
Ta=100 C
25 C
−40 C
50
20
10
5
2
-0.5
-1.0
-1.5
-2.0
-2.5
-3.0
INPUT VOLTAGE : VI (off) (V)
Fig.2
VO= −5V
500
-2m
OUTPUT CURRENT : IO (A)
Fig.1
1k
VCC= −5V
DC CURRENT GAIN : GI
-100
Output current vs. input voltage
(OFF characteristics)
1
-500µ -1m -2m
-5m -10m -20m -50m-100m-200m -500m
OUTPUT CURRENT : IO (A)
Fig.3 DC current gain vs. output
current
lO/lI=20
OUTPUT VOLTAGE : VO (on) (V)
-500m
-200m
-100m
Ta=100 C
25 C
−40 C
-50m
-20m
-10m
-5m
-2m
-1m
-500µ -1m -2m
-5m -10m -20m -50m-100m-200m -500m
OUTPUT CURRENT : IO (A)
Fig.4 Output voltage vs. output
current
2/2
Appendix
Notes
No technical content pages of this document may be reproduced in any form or transmitted by any
means without prior permission of ROHM CO.,LTD.
The contents described herein are subject to change without notice. The specifications for the
product described in this document are for reference only. Upon actual use, therefore, please request
that specifications to be separately delivered.
Application circuit diagrams and circuit constants contained herein are shown as examples of standard
use and operation. Please pay careful attention to the peripheral conditions when designing circuits
and deciding upon circuit constants in the set.
Any data, including, but not limited to application circuit diagrams information, described herein
are intended only as illustrations of such devices and not as the specifications for such devices. ROHM
CO.,LTD. disclaims any warranty that any use of such devices shall be free from infringement of any
third party's intellectual property rights or other proprietary rights, and further, assumes no liability of
whatsoever nature in the event of any such infringement, or arising from or connected with or related
to the use of such devices.
Upon the sale of any such devices, other than for buyer's right to use such devices itself, resell or
otherwise dispose of the same, no express or implied right or license to practice or commercially
exploit any intellectual property rights or other proprietary rights owned or controlled by
ROHM CO., LTD. is granted to any such buyer.
Products listed in this document use silicon as a basic material.
Products listed in this document are no antiradiation design.
The products listed in this document are designed to be used with ordinary electronic equipment or devices
(such as audio visual equipment, office-automation equipment, communications devices, electrical
appliances and electronic toys).
Should you intend to use these products with equipment or devices which require an extremely high level of
reliability and the malfunction of with would directly endanger human life (such as medical instruments,
transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers and other
safety devices), please be sure to consult with our sales representative in advance.
About Export Control Order in Japan
Products described herein are the objects of controlled goods in Annex 1 (Item 16) of Export Trade Control
Order in Japan.
In case of export from Japan, please confirm if it applies to "objective" criteria or an "informed" (by MITI clause)
on the basis of "catch all controls for Non-Proliferation of Weapons of Mass Destruction.
Appendix1-Rev1.0
Similar pages