UTC DTB114EL-AL3-R Digital transistor Datasheet

UNISONIC TECHNOLOGIES CO., LTD
DTB114E
PNP SILICON TRANSISTOR
DIGITAL TRANSISTORS
(BUILT-IN BIAS RESISTORS)
„
FEATURES
* Built-in bias resistors that implies easy ON/OFF applications.
* The bias resistors are thin-film resistors with complete isolation
to allow positive input.
„
EQUIVALENT CIRCUIT
„
ORDERING INFORMATION
Ordering Number
Lead Free
Halogen Free
DTB114EL-AE3-R
DTB114EG-AE3-R
DTB114EL-AL3-R
DTB114EG-AL3-R
„
Package
SOT-23
SOT-323
Pin Assignment
1
2
3
G
I
O
G
I
O
Packing
Tape Reel
Tape Reel
MARKING
www.unisonic.com.tw
Copyright © 2011 Unisonic Technologies Co., Ltd
1 of 3
QW-R206-042,D
DTB114E
„
PNP SILICON TRANSISTOR
ABSOLUTE MAXIMUM RATINGS (TA = 25℃, unless otherwise specified)
PARAMETER
SYMBOL
RATING
UNIT
Supply Voltage
VCC
-50
V
Input Voltage
VIN
-40~+10
V
IOUT
Output Current
-500
mA
P
D
Power Dissipation
200
mW
Junction Temperature
TJ
150
°C
Storage Temperature
TSTG
-55 ~ +150
°C
Note: Absolute maximum ratings are those values beyond which the device could be permanently damaged.
Absolute maximum ratings are stress ratings only and functional device operation is not implied.
„
ELECTRICAL CHARACTERISTICS (TA= 25℃, unless otherwise specified.)
PARAMETER
SYMBOL
TEST CONDITIONS
VIN(OFF) VCC= -5V, IOUT= -100μA
Input Voltage
VIN(ON)
VOUT= -0.3V, IOUT= -10mA
Output Voltage
VOUT(ON) IOUT/IIN= -50mA/-2.5 mA
Input Current
IIN
VIN= -5V
Output Current
IOUT(OFF) VCC= -50V , VIN=0V
DC Current Gain
hFE
VOUT= -5V, IOUT= -50mA
Input Resistance
R1
Resistance Ratio
R2/R1
Transition Frequency
fT
VCE= -10 V, IE=5mA, f=100MHz(Note)
Note: Transition frequency of the device
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
MIN
TYP
MAX
-0.5
UNIT
-0.1
-0.3
-0.88
-0.5
V
mA
μA
10
1
200
13
1.2
kΩ
-3
56
7
0.8
V
MHz
2 of 3
QW-R206-042,D
DTB114E
■
PNP SILICON TRANSISTOR
TYPICAL CHARACTERISTICS
UTC assumes no responsibility for equipment failures that result from using products at values that
exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or
other parameters) listed in products specifications of any and all UTC products described or contained
herein. UTC products are not designed for use in life support appliances, devices or systems where
malfunction of these products can be reasonably expected to result in personal injury. Reproduction in
whole or in part is prohibited without the prior written consent of the copyright owner. The information
presented in this document does not form part of any quotation or contract, is believed to be accurate
and reliable and may be changed without notice.
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
3 of 3
QW-R206-042,D
Similar pages