Microchip DV164007 Mplab icd 2 in-circuit debugger/programmer Datasheet

MPLAB®ICD 2 In-Circuit Debugger/Programmer
In-Circuit Debugging Basics
Traditionally, embedded systems engineers use in-circuit
emulators (ICE) to develop and debug their designs and
then programmers to transfer the code to the devices. The
in-circuit debugging logic, when implemented, is part of the
actual microcontroller silicon and provides a low-cost
alternative to a more expensive ICE. In-circuit debugging
offers these benefits:
· Low cost
· Minimum of extra hardware
· Expensive sockets or adapters are not needed
· Debugging and programming a production line board is
possible
However, it has the following trade-offs:
· Use of some target system resources such as I/O
pins, program memory, data memory, and stack
space. As a result, some portions of an embedded
application may not be debugged.
· Triggering and breakpointing are limited to the built-in
capabilities of the in-circuit debugging logic.
· The target chip must be running with a clock and a
supply voltage. Often an emulator probe can run
without external hardware.
Features
· USB (Full Speed 2 Mbits/s) and RS-232 interface to
host PC
· Real-time execution
· MPLAB IDE compatible (free copy included)
· Built-in over voltage/short circuit monitor
· Firmware upgradeable from PC/web download
· Totally enclosed
· Supports low voltage to 2.0 volts (2.0 to 6.0 range)
· Diagnostic LED's (Power, Busy, Error)
All-in-one Debugger/Programmer
Solution for Flash Products
The MPLAB ICD 2 (In-Circuit Debugger 2) allows
debugging and programming of PIC®and dsPIC®Flash
microcontrollers using the powerful graphical user interface
of the MPLAB Integrated Development Environment (IDE),
included with each kit. The MPLAB ICD 2 is connected to
the design engineer's PC using USB or RS-232 interface
and can be connected to the target via an ICD connector.
The connector uses two device I/O pins that are shared
between in-circuit debugging and In-Circuit Serial
Programming™.
Host System Requirements
· PC-compatible system with a Intel Pentium®class or
higher processor, or equivalent
· A minimum of 32 MB RAM
· A minimum of 40 MB available hard drive space
· CD-ROM drive (for use with the accompanying CD)
· Available USB or RS-232 port
· Microsoft®Windows®98, Windows NT®4.0,
Windows 2000 or Windows XP. USB support may be
limited by the Windows operating system, particularly
Windows 98/NT.
· Read/Write program and data memory of
microcontroller
· Erase of program memory space with verification
· Freeze-peripherals at breakpoint
Products Supported
The MPLAB ICD 2 currently supports most PIC and dsPIC
Flash microcontrollers. Flash PICmicro MCU’s not
supported are PIC16F72/73/74/76/77/83/84A.
The MPLAB ICD 2 firmware is continually being updated to
add support for new devices. A review of the README file
located in MPLAB IDE is recommended for the most current
list of supported parts. As new device firmware becomes
available, free downloads are available at
www.microchip.com.
Universal Programming Module
MPLAB ICD 2 Headers
The Universal Programming
Module can be used in
conjunction with the MPLAB
ICD 2 to provide an easy
means for programming 300 to
600-mil PDIP Flash devices. It
features a 40-pin ZIP socket,
an MPLAB ICD 2 connector,
programming indicator and
configuration jumpers.
For 8-pin (PIC12F629/675), 14-pin
(PIC16F630/676) or 18-pin
(PIC16F627A/628A/648A) devices,
limited I/O make integrated in-circuit
debugging impractical. Instead, incircuit debugging is made possible
by using a header containing an
equivalent device with integrated incircuit debugging peripheral. For
debugging, the header is connected
to the MPLAB ICD 2 module via the MPLAB ICD 2 connector
and is inserted into the target socket with a stand-off
connector.
Part Numbers and Ordering Information – MPLAB® ICD 2 Products and Accessories
Part Number
Description
Availability
DV164005
DV164006
ICD 2 Module (Includes ICD 2 Module and USB Cable)
ICD 2 Evaluation Kit (Includes ICD 2 Module, USB Cable, RS-232 Cable, Power Supply and
Now
PICDEM™ 2 Plus Demonstration Board - DV163022)
Now
DV164007
ICD 2 Module ws (Includes ICD 2 Module, USB Cable, RS-232 Cable and Power Supply)
Now
AC162049
Universal Programming Module Works with DV164005, DV164006 and DV164007 above)
Now
AC162048
DM163022
RS-232 and Power Supply Kit (Use with DV164005 above for RS-232 communication)
PICDEM 2 Plus Demonstration Board (Includes PIC18F452, PIC16F877, LCD 2 x 16 Display,
Now
Now
AC162050
AC162051
AC162052
AC162053
AC162054
Header Interface (8P DIP) for PIC12F629/675
Header Interface (28P/40P DIP)
Header Interface (14P DIP) for PIC16F676/630
Header Interface (18P DIP) for PIC16F627A/628A/648A
Header Interface (18P DIP) for PIC16F716
LED’s, RS-232 Port, Piezo Sounder, Temperature Sensor, Demonstration Programs, Unassembled
Source Code and More)
Now
Now
Now
Now
Q1/04
Customer Support
Microchip maintains a worldwide network of distributors, representatives, local sales offices, Field Application Engineers and
Corporate Application Engineers. Microchip’s Internet home page can be reached at: www.microchip.com.
Atlanta
Boston
Chicago
Dallas
Detroit
Kokomo
Los Angeles
Phoenix
San Jose
Toronto
Europe
Asia/Pacific
Americas
(770) 640-0034
(978) 692-3848
(630) 285-0071
(972) 818-7423
(248) 538-2250
(765) 864-8360
(949) 263-1888
(480) 792-7966
(408) 436-7950
(905) 673-0699
Australia
China – Beijing
China – Chengdu
China – Fuzhou
China – Hong Kong SAR
China – Qingdao
China – Shanghai
China – Shenzhen
China – Shunde
India
Japan
Korea
Singapore
Taiwan
Taiwan – Kaohsiung
61-2-9868-6733
86-10-85282100
86-28-86766200
86-591-7503506
852-2401-1200
86-532-5027355
86-21-6275-5700
86-755-82901380
86-765-8395507
91-80-2290061
81-45-471- 6166
82-2-554-7200
65-6334-8870
886-2-2717-7175
886-7-536-4818
Austria
Denmark
France
Germany
Italy
Netherlands
United Kingdom
43-7242-2244-399
45-4420-9895
33-1-69-53-63-20
49-89-627-144-0
39-0331-742611
31-416-690399
44-118-921-5869
As of 9/1/03
Microchip Technology Inc. • 2355 W. Chandler Blvd. • Chandler, AZ 85224-6199 USA • (480) 792-7200 • FAX (480) 792-7277
The Microchip name and logo, the Microchip logo, dsPIC, KEELOQ, MPLAB, PIC, PICmicro, PICSTART, PRO MATE and PowerSmart are registered trademarks of Microchip Technology Incorporated
in the U.S.A. and other countries. FilterLab, microID, MXDEV, MXLAB, PICMASTER, SEEVAL and The Embedded Control Solutions Company are registered trademarks of Microchip Technology
Incorporated in the U.S.A. Accuron, Application Maestro, dsPICDEM, dsPICDEM.net, ECAN, ECONOMONITOR, FanSense, FlexROM, fuzzyLAB, In-Circuit Serial Programming, ICSP, ICEPIC,
microPort, Migratable Memory, MPASM, MPLIB, MPLINK, MPSIM, PICC, PICkit, PICDEM, PICDEM.net, PowerCal, PowerInfo, PowerMate, PowerTool, rfLAB, rfPIC, Select Mode, SmartSensor,
SmartShunt, SmartTel and Total Endurance are trademarks of Microchip Technology Incorporated in the U.S.A. and other countries. Serialized Quick Turn Programming (SQTP) is a service mark of
Microchip Technology Incorporated in the U.S.A. All other trademarks mentioned herein are property of their respective companies.
© 2003, Microchip Technology Incorporated, Printed in the U.S.A., All Rights Reserved. 9/03
DS51264B
*DS51264B*
Similar pages