DOMINANT DWW-SJD-U2 Power led ingan white Datasheet

DOMINANT
Semiconductors
Innovating Illumination
Power DomiLED
TM
DATA SHEET:
Power DomiLEDTM
InGaN White : DWW-xJD
TM
With its significant power in terms brightness, viewing angle and variety of
application possibilities, Power DomiLED™ truly is a standout performer!
Ideal for automotive interior lighting as well as home, office and industrial
applications, it is also a proven performer in electronic signs and signals.
Features:
>
>
>
>
>
>
High brightness surface mount LED.
120° viewing angle.
Small package outline (LxWxH) of 3.2 x 2.8 x 1.8mm.
Qualified according to JEDEC moisture sensitivity Level 2.
Compatible to both IR reflow soldering and TTW soldering.
Environmental friendly; RoHS compliance.
Applications:
>
>
>
>
Automotive: interior applications, eg: switches, telematics,
climate control system, dashboard, etc.
exterior applications, eg: signal lighting,
Center High Mounted Stop Light (CHMSL),
Display: full color display video notice board.
Industry: white goods (eg: Oven, microwave, etc.).
Lighting: architecture lighting, general lighting, garden light, etc
© 2005 DomiLED is a trademark of DOMINANT Semiconductors.
All rights reserved. Product specifications are subject to change without notice.
1
20/02/2006 V1.0
DOMINANT TM
InGaN White : DWW-xJD
Semiconductors
Innovating Illumination
Part Ordering
Number
Chip Technology
/ Color
DWW-SJD-TU2-1*
InGaN
• DWW-SJD-T1
White
Viewing
Angle˚
120
Total Flux @
IF=30mA, mlm (typ)
1350
Luminous Intensity @
IF = 30mA IV (mcd)
285.0 - 715.0
285.0 - 355.0
• DWW-SJD-T2
355.0 - 450.0
• DWW-SJD-U1
450.0 - 560.0
• DWW-SJD-U2
560.0 - 715.0
DWW-UJD-UV2-1*
2000
450.0 - 1125.0
• DWW-UJD-U1
450.0 - 560.0
• DWW-UJD-U2
560.0 - 715.0
• DWW-UJD-V1
715.0 - 900.0
• DWW-UJD-V2
900.0 - 1125.0
DWW-UJD-VW1-1
3000
715.0 - 1400.0
• DWW-UJD-V1
715.0 - 900.0
• DWW-UJD-V2
900.0 - 1125.0
• DWW-UJD-W1
1125.0 - 1400.0
* Not for new design
NOTE
1. All part number above comes in a quantity of 2000 units per reel.
2. Other luminous intensity groups may also be available upon request.
3. Luminous intensity is measured with an accuracy of ± 11%.
4. Wavelength binning is carried for all units as per the wavelength-binning table. Only one wavelength group is allowed for each reel.
5. InGaN wavelength is very sensitive to drive current. Operating at lower current is not recommended and may yield unpredictable performance
current pulsing should is used for dimming purposes.
6. An optional Vf bining is also available upon request. Bining scheme is as per following table.
2
20/02/2006 V1.0
DOMINANT TM
InGaN White : DWW-xJD
Semiconductors
Innovating Illumination
Electrical Characteristics at Ta=25˚C
Part Number
Min. (V)
DWW
3.05
Vf @ If = 30mA
Typ. (V)
Max. (V)
3.40
Vr @ Ir = 10uA
Min. (V)
5
4.00
Forward voltages are measure using a current pulse of 1 ms and with an accuracy of ± 0.1V.
Vf Bining (Optional)
Vf @ If = 30mA
Forward Voltage (V)
3A
3.05 ... 3.35
30
3.35 ... 3.65
31
3.65 ... 3.95
32
3.95 ... 4.25
Forward voltage, Vf is measured with an accuracy of ± 0.1V.
Please consult sales and marketing to incorporate special part number to incorporate Vf binning.
Absolute Maximum Ratings
Maximum Value
Unit
DC forward current
30
mA
Peak pulse current; (tp ≤ 10µs, Duty cycle = 0.1)
200
mA
Reverse voltage; Ir (max) = 10µA
5
V
ESD Thereshold (HBM)
2
kV
LED juction temperature
125
˚C
Operating temperature
-40 … +100
˚C
Storage temperature
-40 … +100
˚C
135
mW
Power dissipation (at room temperature)
3
20/02/2006 V1.0
DOMINANT TM
InGaN White : DWW-xJD
Semiconductors
Innovating Illumination
DDW, White Color Grouping
Dominant White Bin Structure
0.44
0.42
0.40
0.38
0.36
0.34
0.32
0.30
0.28
0.26
0.24
0.27
•
•
•
A1
A2
0.28
•
•
•
0.29
A3
A4
0.30
•
•
•
C1
C2
•
•
•
0.31
•
•
•
C3
C4
0.32
E1
E2
0.33
•
•
•
0.34
E3
E4
•
•
•
0.35
0.36
Chromaticity coordinate groups are measured with an accuracy of ± 0.01.
W
Bin
A1
A2
A3
A4
C1
C2
C3
C4
0.2775
0.2900
0.2900
0.2775
Cy
0.2732
0.2939
0.3114
0.2907
Cx
0.2775
0.2900
0.2900
0.2775
Cy
0.2557
0.2764
0.2939
0.2732
Cx
0.2900
0.3025
0.3025
0.2900
Cy
0.2939
0.3146
0.3321
0.3114
Cx
0.2900
0.3025
0.3025
0.2900
Cy
0.2764
0.2971
0.3146
0.2939
Cx
Cx
0.3025
0.3150
0.3150
0.3025
Cy
0.3146
0.3354
0.3529
0.3321
Cx
0.3025
0.3150
0.3150
0.3025
Cy
0.2971
0.3179
0.3354
0.3146
Cx
0.3150
0.3275
0.3275
0.3150
Cy
0.3354
0.3561
0.3736
0.3529
Cx
0.3150
0.3275
0.3275
0.3150
0.3179
0.3386
0.3561
0.3354
Cy
X
Bin
E1
E2
E3
E4
Cx
0.3275
0.3400
0.3400
0.3275
Cy
0.3561
0.3768
0.3943
0.3736
Cx
0.3275
0.3400
0.3400
0.3275
Cy
0.3386
0.3593
0.3768
0.3561
Cx
0.3400
0.3525
0.3525
0.3400
Cy
0.3768
0.3975
0.4150
0.3943
Cx
0.3400
0.3525
0.3525
0.3400
Cy
0.3593
0.3800
0.3975
0.3768
Dominant color coordinate is measured with an accuracy of ± 0.01.
4
20/02/2006 V1.0
DOMINANT TM
InGaN White : DWW-xJD
Semiconductors
Innovating Illumination
Forward Current Vs Forward Voltage
Relative Intensity Vs Forward Current
60
2.5
Forward Current, mA
Relative Intensity
2
1.5
1
0.5
40
30
20
10
0
0
0
20
40
60
80
100
2.5
3
3.5
4
4.5
Forward Current, mA
Forward Voltage, V
Maximum Current Vs Temperature
Wavelength Vs Forward Current
1
35
0.9
30
0.8
Relative Intensity
Forward Current, mA
50
25
20
15
10
0.7
0.6
0.5
0.4
0.3
0.2
5
0.1
0
0
0
10
20
30
40
50
60
70
80
90 100
400
450
500
550
600
650
700
750
800
Wavelength, nm
Ambient Temperature
Radiation Pattern
30°
20°
10°
0°
1.0
40°
0.8
50°
0.6
60°
0.4
70°
0.2
80°
90°
0
5
20/02/2006 V1.0
DOMINANT TM
InGaN White : DWW-xJD
Semiconductors
Innovating Illumination
Power DomiLED • InGaN White : DWW-xJD Package Outlines
TM
6
20/02/2006 V1.0
DOMINANT TM
InGaN White : DWW-xJD
Semiconductors
Innovating Illumination
Recommended Solder Pad
7
20/02/2006 V1.0
DOMINANT TM
InGaN White : DWW-xJD
Semiconductors
Innovating Illumination
Taping and orientation
• Reels come in quantity of 2000 units.
• Reel diameter is 180 mm.
8
20/02/2006 V1.0
DOMINANT TM
InGaN White : DWW-xJD
Semiconductors
Innovating Illumination
Packaging Specification
9
20/02/2006 V1.0
DOMINANT TM
InGaN White : DWW-xJD
Semiconductors
Innovating Illumination
Packaging Specification
Moisture sensitivity level
Barcode label
DOMINANT Semiconductors
ROHS Compliant
LOT NO : lotno
PB Free
PART NO : partno
QTY : qty
S/N : xxx
D/C: xxxx
GROUP : group
Reel
Moisture absorbent material +
Moisture indicator
The reel, moisture absorbent material and moisture indicator are
sealed inside the moisture proof foil bag
Average 1pc Power DomiLED
1 completed bag (2000pcs)
0.034
0.034
190 ± 10
190
10
Weight
Weight(gram)
(gram)
Cardboard
Box
DOMINANT TM
Semiconductors
For Power DomiLED
Cardboard Box
Size
TM
Dimensions (mm)
Empty Box
Weight (kg)
Reel / Box
Quantity / Box (pcs)
Small
300 x 250 x 250
0.58
15 reels MAX
30,000 MAX
Large
416 x 516 x 476
1.74
55 reels MAX
110,000 MAX
10
20/02/2006 V1.0
DOMINANT TM
InGaN White : DWW-xJD
Semiconductors
Innovating Illumination
Recommended Sn-Pb IR-Reflow Soldering Profile
Classification Reflow Profile (JEDEC J-STD-020C)
275
235-240˚C
10-30s
250
225
Ramp-up
3˚C/sec max.
Temperature (˚C)
200
175
183˚C
150
60-150s
125
Rampdown
6˚C/sec
max.
100
75
Preheat 60-120s
50
360s max
25
0
50
100
150
200
Recommended Pb-free Soldering Profile
Classification Reflow Profile (JEDEC J-STD-020C)
300
255-260˚C
10-30s
275
250
Temperature (˚C)
Ramp-up
3˚C/sec max.
217˚C
225
200
60-150s
175
150
125
Rampdown
6˚C/sec
max.
100
75
Preheat 60-180s
50
25
480s max
0
50
100
150
200
Time (sec)
11
20/02/2006 V1.0
DOMINANT TM
InGaN White : DWW-xJD
Semiconductors
Innovating Illumination
Revision History
Page
Subjects
Date of Modification
-
New Format
20 Feb 2006
NOTE
All the information contained in this document is considered to be reliable at the time of publishing. However, DOMINANT
Semiconductors does not assume any liability arising out of the application or use of any product described herein.
DOMINANT Semiconductors reserves the right to make changes at any time without prior notice to any products in order
to improve reliability, function or design.
DOMINANT Semiconductors products are not authorized for use as critical components in life support devices or systems
without the express written approval from the Managing Director of DOMINANT Semiconductors.
12
20/02/2006 V1.0
DOMINANT TM
Semiconductors
Innovating Illumination
InGaN White : DWW-xJD
About Us
DOMINANT Semiconductors is a dynamic Malaysian Corporation that is among the world’s leading SMT LED
Manufacturers. An excellence – driven organization, it offers a comprehensive product range for diverse industries
and applications. Featuring an internationally certified quality assurance acclaim, DOMINANT’s extra bright LEDs
are perfectly suited for various lighting applications in the automotive, consumer and communications as well as industrial sectors. With extensive industry experience and relentless pursuit of innovation, DOMINANT’s state-of-art
manufacturing, research and testing capabilities have become a trusted and reliable brand across the globe. More
information about DOMINANT Semiconductors can be found on the Internet at http://www.dominant-semi.com.
Please contact us for more information:
Head Quarter
DOMINANT Semiconductors Sdn. Bhd.
Lot 6, Batu Berendam, FTZ Phase III, 75350 Melaka, Malaysia
Tel: (606) 283 3566 Fax: (606) 283 0566
E-mail: [email protected]
DOMINANT China Sales Office
DOMINANT Semiconductors (Shenzhen) Co. Ltd.
24BC Newbaohui Building, No. 1007 West Nanhai Blvd., Nanshan, Shenzhen, China P.C. 518054
Tel: +86 (755) 86031785 / +86 (755) 86031786 Fax: +86 (755) 86031789
E-mail: [email protected]
DOMINANT Korea Sales Office
DOMINANT Semiconductors Korea Inc.
902 Sunil Technopia, 440 Sangdaewon-dong, Jungwon-gu, Sungnam-si, Kyunggi-do, Korea 462726
Tel: 82-31-777-3978 Fax: 82-31-777-3976
E-mail: [email protected]
DOMINANT
Semiconductors
Innovating Illumination
TM
Similar pages