Ferroxcube E13-3F3-A160 E cores and accessory Datasheet

FERROXCUBE
DATA SHEET
E13/6/6
E cores and accessories
Supersedes data of September 2004
2008 Sep 01
Ferroxcube
E13/6/6
(814E250)
E cores and accessories
CORE SETS
Effective core parameters
SYMBOL
PARAMETER
12.7 ±0.25
handbook, halfpage
VALUE
9.5 ±0.25
3.2
±0.13
UNIT
Σ(I/A)
core factor (C1)
1.37
mm−1
Ve
effective volume
559
mm3
Ie
effective length
27.7
mm
Ae
effective area
20.2
mm2
Amin
minimum area
20.2
mm2
m
mass of core half
≈ 1.4
g
4.1
±0.13
5.7
±0.13
6.4
±0.13
CBW005
Dimensions in mm.
Fig.1 E13/6/6 core half.
Core halves
AL measured in combination with a non-gapped core half, clamping force for AL measurements, 15 ±5 N.
GRADE
3C90
AL
(nH)
µe
AIR GAP
(µm)
63 ±5%
≈ 70
≈ 560
E13/6/6-3C90-A63
100 ±8%
≈ 110
≈ 310
E13/6/6-3C90-A100
160 ±8%
≈ 175
≈ 175
E13/6/6-3C90-A160
250 ±20%
≈ 275
≈ 100
E13/6/6-3C90-A250
315 ±20%
≈ 340
≈ 75
E13/6/6-3C90-A315
1470 ±25%
≈ 1605
≈0
E13/6/6-3C90
TYPE NUMBER
3C92
1080 ±25%
≈ 1180
≈0
E13/6/6-3C92
3C94
1470 ±25%
≈ 1605
≈0
E13/6/6-3C94
3C96
1250 ±25%
≈ 1360
≈0
E13/6/6-3C96
3F3
3F35
2008 Sep 01
63 ±5%
≈ 70
≈ 560
E13/6/6-3F3-A63
100 ±8%
≈ 110
≈ 310
E13/6/6-3F3-A100
160 ±8%
≈ 175
≈ 175
E13/6/6-3F3-A160
250 ±20%
≈ 275
≈ 100
E13/6/6-3F3-A250
315 ±20%
≈ 340
≈ 75
E13/6/6-3F3-A315
1250 ±25%
≈ 1370
≈0
E13/6/6-3F3
1000 ±25%
≈ 1090
≈0
E13/6/6-3F35
315
Ferroxcube
E13/6/6
(814E250)
E cores and accessories
Core halves of high permeability grades
AL measured in combination with a non-gapped core half, clamping force for AL measurements, 15 ±5 N.
AL
(nH)
µe
AIR GAP
(µm)
2600 ±25%
≈ 2840
≈0
GRADE
3E27
TYPE NUMBER
E13/6/6-3E27
Properties of core sets under power conditions
B (mT) at
CORE LOSS (W) at
H = 250 A/m;
f = 25 kHz;
T = 100 °C
f = 25 kHz;
ˆ = 200 mT;
B
T = 100 °C
f = 100 kHz;
B̂ = 100 mT;
T = 100 °C
f = 100 kHz;
B̂ = 200 mT;
T = 100 °C
f = 400 kHz;
ˆ = 50 mT;
B
T = 100 °C
3C90
≥320
≤ 0.06
≤ 0.06
−
−
3C92
≥370
−
≤ 0.048
≤ 0.33
−
3C94
≥320
−
≤ 0.048
≤ 0.33
−
3C96
≥340
−
≤ 0.037
≤ 0.25
−
3F3
≥320
−
≤ 0.06
−
≤ 0.11
3F35
≥300
−
−
−
−
GRADE
Properties of core sets under power conditions (continued)
B (mT) at
CORE LOSS (W) at
H = 250 A/m;
f = 25 kHz;
T = 100 °C
f = 500 kHz;
ˆ = 50 mT;
B
T = 100 °C
f = 500 kHz;
ˆ = 100 mT;
B
T = 100 °C
f = 1 MHz;
ˆ = 30 mT;
B
T = 100 °C
f = 3 MHz;
ˆ = 10 mT;
B
T = 100 °C
3C96
≥340
≤ 0.21
−
−
−
3F3
≥315
−
−
−
−
3F35
≥300
≤ 0.075
≤ 0.6
−
−
GRADE
Note
1. Measured at 60 °C.
2008 Sep 01
316
Ferroxcube
E13/6/6
(814E250)
E cores and accessories
COIL FORMERS
General data for E13/6/6 coil former
ITEM
SPECIFICATION
Coil former material
polyamide (PA6.6), glass reinforced, flame retardant in accordance with
“UL 94V-2”; UL file number E41938(M)
Maximum operating temperature
130 °C, “IEC 60085”, class B
handbook, full pagewidth
9.25 max.
7.9 max.
4.5
6.5
3.2
min.
∅1.2
12.7 6.35
max. min.
7.6
CBW006
Dimensions in mm.
Fig.2 E13/6/6 coil former.
Winding data and area product for E13/6/6 coil former
NUMBER OF
SECTIONS
MINIMUM
WINDING
AREA
(mm2)
NOMINAL
WINDING
WIDTH
(mm)
AVERAGE
LENGTH OF
TURN
(mm)
AREA
PRODUCT
Ae x Aw
(mm4)
1
15.4
6.5
32.0
311
2008 Sep 01
317
TYPE NUMBER
CP-E13/6/6-1S
Ferroxcube
E13/6/6
(814E250)
E cores and accessories
General data for E13/6/6 coil former
ITEM
SPECIFICATION
Coil former material
polyphenylenesulfide (PPS), glass reinforced, flame retardant in accordance
with “UL 94V-0”; UL file number E54700
Maximum operating temperature
130 °C, “IEC 60085”, class B
handbook, full pagewidth
9.25 max.
7.9 max.
4.5
6.5
3.2
min.
∅1.2
12.7 6.35
max. min.
7.6
CBW006
Dimensions in mm.
Fig.3 E13/6/6 coil former.
Winding data and area product for E13/6/6 coil former
NUMBER OF
SECTIONS
MINIMUM
WINDING
AREA
(mm2)
NOMINAL
WINDING
WIDTH
(mm)
AVERAGE
LENGTH OF
TURN
(mm)
AREA
PRODUCT
Ae x Aw
(mm4)
1
15.4
6.5
32.0
311
2008 Sep 01
318
TYPE NUMBER
CP-E13/6/6-1S-A
Ferroxcube
E13/6/6
(814E250)
E cores and accessories
DATA SHEET STATUS DEFINITIONS
DATA SHEET
STATUS
PRODUCT
STATUS
DEFINITIONS
Preliminary
specification
Development
This data sheet contains preliminary data. Ferroxcube reserves the right to
make changes at any time without notice in order to improve design and
supply the best possible product.
Product specification
Production
This data sheet contains final specifications. Ferroxcube reserves the right
to make changes at any time without notice in order to improve design and
supply the best possible product.
DISCLAIMER
Life support applications  These products are not designed for use in life support appliances, devices, or systems
where malfunction of these products can reasonably be expected to result in personal injury. Ferroxcube customers
using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Ferroxcube
for any damages resulting from such application.
PRODUCT STATUS DEFINITIONS
STATUS
INDICATION
DEFINITION
Prototype
These are products that have been made as development samples for the purposes of
technical evaluation only. The data for these types is provisional and is subject to
change.
Design-in
These products are recommended for new designs.
Preferred
These products are recommended for use in current designs and are available via our
sales channels.
Support
These products are not recommended for new designs and may not be available
through all of our sales channels. Customers are advised to check for availability.
2008 Sep 01
319
Similar pages