FERYSTER E22/6/16-3F3 Planar e cores and accessory Datasheet

FERROXCUBE
DATA
A SH
SHEET
EET
E22/6/16
Planar E cores and accessories
Supersedes data of February 2002
2004 Sep 01
Ferroxcube
Planar E cores and accessories
E22/6/16
CORES
Effective core parameters of a set of E cores
SYMBOL
PARAMETER
VALUE
handbook, halfpage
UNIT
Σ(I/A)
core factor (C1)
0.414
mm−1
Ve
effective volume
2550
mm3
Ie
effective length
32.5
mm
Ae
effective area
78.3
mm2
Amin
minimum area
78.3
mm2
m
mass of core half
≈ 6.5
g
21.8 ± 0.4
16.8 ± 0.4
5
± 0.1
3.2 ± 0.1
5.7 ± 0.1
15.8 ± 0.3
MBE646
R 0.8 (12x)
Dimensions in mm.
Fig.1 E22/6/16.
Effective core parameters of an E/PLT combination
SYMBOL
PARAMETER
VALUE
UNIT
Σ(I/A)
core factor (C1)
0.332
mm−1
Ve
effective volume
2040
mm3
Ie
effective length
26.1
mm
Ae
effective area
78.5
mm2
Amin
minimum area
78.5
mm2
m
mass of plate
≈4
g
handbook, halfpage
21.8 ± 0.4
2.5 ± 0.05
Ordering information for plates
GRADE
TYPE NUMBER
3C90
PLT22/16/2.5-3C90
3C92
PLT22/16/2.5-3C92
3C93
PLT22/16/2.5-3C93
3C94
PLT22/16/2.5-3C94
3C96
PLT22/16/2.5-3C96
3F3
PLT22/16/2.5-3F3
3F35
PLT22/16/2.5-3F35
3F4
PLT22/16/2.5-3F4
3F45
PLT22/16/2.5-3F45
3E6
PLT22/16/2.5-3E6
2004 Sep 01
15.8 ± 0.3
MBE654
R 0.8
Dimensions in mm.
Fig.2 PLT22/16/2.5.
2
Ferroxcube
Planar E cores and accessories
E22/6/16
Core halves for use in combination with an non-gapped E core
AL measured in combination with a non-gapped core half, clamping force for AL measurements, 20 ±10 N, using
a PCB coil containing 5 layers of 20 tracks each, total height 2.5 mm.
GRADE
3C90
AL
(nH)
µe
160 ±3%
≈ 53
≈ 900
E22/6/16-3C90-A160-E
250 ±3%
≈ 82
≈ 490
E22/6/16-3C90-A250-E
315 ±3%
≈ 104
≈ 360
E22/6/16-3C90-A315-E
400 ±5%
≈ 132
≈ 280
E22/6/16-3C90-A400-E
630 ±8%
≈ 208
≈ 160
E22/6/16-3C90-A630-E
AIR GAP
(µm)
TYPE NUMBER
5150 ±25%
≈ 1700
≈0
E22/6/16-3C90
3C92
3700 ±25%
≈ 1220
≈0
E22/6/16-3C92
3C93
4300 ±25%
≈ 1420
≈0
3C94
160 ±3%
≈ 53
≈ 900
E22/6/16-3C94-A160-E
250 ±3%
≈ 82
≈ 490
E22/6/16-3C94-A250-E
315 ±3%
≈ 104
≈ 360
E22/6/16-3C94-A315-E
400 ±5%
≈ 132
≈ 280
E22/6/16-3C94-A400-E
E22/6/16-3C94-A630-E
630 ±8%
3C96
3F3
≈ 208
≈ 160
5150 ±25%
≈ 1700
≈0
4600 ±25%
E22/6/16-3C93
E22/6/16-3C94
≈ 1520
≈0
160 ±3%
≈ 53
≈ 900
E22/6/16-3F3-A160-E
250 ±3%
≈ 82
≈ 490
E22/6/16-3F3-A250-E
315 ±3%
≈ 104
≈ 360
E22/6/16-3F3-A315-E
400 ±5%
≈ 132
≈ 280
E22/6/16-3F3-A400-E
E22/6/16-3F3-A630-E
630 ±8%
E22/6/16-3C96
≈ 208
≈ 160
4300 ±25%
≈ 1420
≈0
3F35
3500 ±25%
≈ 1160
≈0
3F4
160 ±3%
≈ 53
≈ 900
E22/6/16-3F4-A160-E
250 ±3%
≈ 82
≈ 490
E22/6/16-3F4-A250-E
315 ±3%
≈ 104
≈ 360
E22/6/16-3F4-A315-E
400 ±5%
≈ 132
≈ 280
E22/6/16-3F4-A400-E
630 ±8%
≈ 208
≈ 160
E22/6/16-3F4-A630-E
2400 ±25%
≈ 790
≈0
E22/6/16-3F4
≈ 790
≈0
E22/6/16-3F45
≈ 7250
≈0
E22/6/16-3E6
3F45
2400 ±25%
3E6
22000 +40/−30%
2004 Sep 01
3
E22/6/16-3F3
E22/6/16-3F35
Ferroxcube
Planar E cores and accessories
E22/6/16
Core halves for use in combination with a plate (PLT)
AL measured in combination with a plate (PLT), clamping force for AL measurements, 20 ±10 N, using a PCB coil
containing 5 layers of 20 tracks each, total height 2.5 mm.
GRADE
3C90
AL
(nH)
µe
160 ±3%
≈ 42
≈ 950
E22/6/16-A160-P
250 ±3%
≈ 66
≈ 550
E22/6/16-3C90-A250-P
315 ±3%
≈ 83
≈ 400
E22/6/16-3C90-A315-P
400 ±5%
≈ 106
≈ 280
E22/6/16-3C90-A400-P
630 ±8%
≈ 166
≈ 160
E22/6/16-3C90-A630-P
AIR GAP
(µm)
TYPE NUMBER
6150 ±25%
≈ 1620
≈0
E22/6/16-3C90
3C92
4410 ±25%
≈ 1170
≈0
E22/6/16-3C92
3C93
5000 ±25%
≈ 1320
≈0
3C94
160 ±3%
≈ 42
≈ 950
E22/6/16-3C94-A160-P
250 ±3%
≈ 66
≈ 550
E22/6/16-3C94-A250-P
315 ±3%
≈ 83
≈ 400
E22/6/16-3C94-A315-P
400 ±5%
≈ 106
≈ 280
E22/6/16-3C94-A400-P
E22/6/16-3C94-A630-P
630 ±8%
3C96
3F3
≈ 166
≈ 160
6150 ±25%
≈ 1620
≈0
5450 ±25%
E22/6/16-3C93
E22/6/16-3C94
≈ 1440
≈0
160 ±3%
≈ 42
≈ 950
E22/6/16-3F3-A160-P
250 ±3%
≈ 66
≈ 550
E22/6/16-3F3-A250-P
315 ±3%
≈ 83
≈ 400
E22/6/16-3F3-A315-P
400 ±5%
≈ 106
≈ 280
E22/6/16-3F3-A400-P
E22/6/16-3F3-A630-P
630 ±8%
E22/6/16-3C96
≈ 166
≈ 160
5000 ±25%
≈ 1320
≈0
3F35
4100 ±25%
≈ 1080
≈0
3F4
160 ±3%
≈ 42
≈ 950
E22/6/16-3F4-A160-P
250 ±3%
≈ 66
≈ 550
E22/6/16-3F4-A250-P
315 ±3%
≈ 83
≈ 400
E22/6/16-3F4-A315-P
400 ±5%
≈ 106
≈ 280
E22/6/16-3F4-A400-P
630 ±8%
≈ 166
≈ 160
E22/6/16-3F4-A630-P
2900 ±25%
≈ 770
≈0
E22/6/16-3F4
≈ 770
≈0
E22/6/16-3F45
≈ 6900
≈0
E22/6/16-3E6
3F45
2900 ±25%
3E6
26000 +40/−30%
2004 Sep 01
4
E22/6/16-3F3
E22/6/16-3F35
Ferroxcube
Planar E cores and accessories
E22/6/16
Properties of core sets under power conditions
B (mT) at
CORE LOSS (W) at
H = 250 A/m;
f = 10 kHz;
T = 100 °C
f = 100 kHz;
ˆ = 100 mT;
B
T = 100 °C
f = 100 kHz;
ˆ = 200 mT;
B
T = 100 °C
f = 400 kHz;
ˆ = 50 mT;
B
T = 100 °C
f = 500 kHz;
ˆ = 50 mT;
B
T = 100 °C
E+E22-3C90
≥320
≤ 0.28
−
−
−
E+PLT22-3C90
≥320
≤ 0.23
−
−
−
E+E22-3C92
≥370
≤ 0.22
≤ 1.5
−
−
E+PLT22-3C92
≥370
≤ 0.18
≤ 1.25
−
−
E+E22-3C93
≥320
≤ 0.22(1)
≤ 1.5(1)
−
−
E+PLT22-3C93
≥320
≤ 0.18(1)
≤ 1.25(1)
−
−
GRADE
E+E22-3C94
≥320
≤ 0.22
≤ 1.5
−
−
E+PLT22-3C94
≥320
≤ 0.18
≤ 1.25
−
−
E+E22-3C96
≥320
≤ 0.17
≤ 1.1
≤ 0.45
≤ 1.0
E+PLT22-3C96
≥320
≤ 0.14
≤ 1.0
≤ 0.38
≤ 0.75
E+E22-3F3
≥300
≤ 0.28
−
≤ 0.5
−
E+PLT22-3F3
≥300
≤ 0.23
−
≤ 0.40
−
E+E22-3F35
≥300
−
−
≤ 0.25
≤ 0.4
E+PLT22-3F35
≥300
−
−
≤ 0.2
≤ 0.3
1.
Measured at 140 °C.
Properties of core sets under power conditions (continued)
B (mT) at
H = 250 A/m;
f = 10 kHz;
T = 100 °C
f = 500 kHz;
ˆ = 100 mT;
B
T = 100 °C
f = 1 MHz;
ˆ = 30 mT;
B
T = 100 °C
f = 1 MHz;
ˆ = 50 mT;
B
T = 100 °C
f = 3 MHz;
ˆ = 10 mT;
B
T = 100 °C
E+E22-3F35
≥300
≤ 3.0
−
−
−
E+PLT22-3F35
≥300
≤ 2.2
−
−
−
E+E22-3F4
≥250
−
≤ 0.8
−
≤ 1.2
E+PLT22-3F4
≥250
−
≤ 0.6
−
≤ 1.0
E+E22-3F45
≥250
−
≤ 0.51
≤ 1.3
≤ 0.9
E+PLT22-3F45
≥250
−
≤ 0.41
≤ 1.1
≤ 0.72
GRADE
2004 Sep 01
5
Ferroxcube
Planar E cores and accessories
E22/6/16
MOUNTING INFORMATION
R0.8 max.
5.25
min.
handbook, 4 columns
16.3
min.
16.2 max.
CBW553
22.4 min.
Fig.3 Recommended PCB cut-out for glued cores.
2004 Sep 01
6
Ferroxcube
Planar E cores and accessories
E22/6/16
DATA SHEET STATUS DEFINITIONS
DATA SHEET
STATUS
PRODUCT
STATUS
DEFINITIONS
Preliminary
specification
Development
This data sheet contains preliminary data. Ferroxcube reserves the right to
make changes at any time without notice in order to improve design and
supply the best possible product.
Product specification
Production
This data sheet contains final specifications. Ferroxcube reserves the right
to make changes at any time without notice in order to improve design and
supply the best possible product.
DISCLAIMER
Life support applications  These products are not designed for use in life support appliances, devices, or systems
where malfunction of these products can reasonably be expected to result in personal injury. Ferroxcube customers
using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Ferroxcube
for any damages resulting from such application.
PRODUCT STATUS DEFINITIONS
STATUS
INDICATION
DEFINITION
Prototype
These are products that have been made as development samples for the purposes of
technical evaluation only. The data for these types is provisional and is subject to
change.
Design-in
These products are recommended for new designs.
Preferred
These products are recommended for use in current designs and are available via our
sales channels.
Support
These products are not recommended for new designs and may not be available
through all of our sales channels. Customers are advised to check for availability.
2004 Sep 01
7
Similar pages